Code: Select all
Snapshot created on: 20220315_1001
System: Kernel: 5.10.0-33-amd64 [5.10.226-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-33-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower October 20 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Gigabyte product: N/A v: N/A serial: <filter> Chassis: type: 3
serial: <filter>
Mobo: Gigabyte model: F2A88X-UP4 v: x.x serial: <filter> UEFI: American Megatrends
v: F8a date: 12/14/2015
CPU: Info: Quad Core model: AMD A10-7850K Radeon R7 12 Compute Cores 4C+8G bits: 64
type: MCP arch: Steamroller family: 15 (21) model-id: 30 (48) stepping: 1
microcode: 6003106 cache: L2: 2 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 29545
Speed: 1696 MHz min/max: 1700/3700 MHz boost: enabled Core speeds (MHz): 1: 1696
2: 1696 3: 1696 4: 1696
Vulnerabilities: Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Kaveri [Radeon R7 Graphics] vendor: Gigabyte driver: radeon v: kernel
alternate: amdgpu bus-ID: 00:01.0 chip-ID: 1002:130f class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: ati,radeon unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI-0 res: 1920x1080 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27")
OpenGL: renderer: AMD KAVERI (DRM 2.50.0 5.10.0-33-amd64 LLVM 11.0.1)
v: 4.5 Mesa 20.3.5 direct render: Yes
Audio: Device-1: AMD Kaveri HDMI/DP Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 00:01.1 chip-ID: 1002:1308 class-ID: 0403
Device-2: AMD FCH Azalia vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 00:14.2 chip-ID: 1022:780d class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-33-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte
driver: r8169 v: kernel port: e000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 2.81 TiB used: 249.2 GiB (8.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Silicon Power model: SPCC Solid State Disk
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
serial: <filter> rev: 4A0 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: CC27 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: SMI (STMicroelectronics) model: USB DISK
size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter>
rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 30.5 GiB size: 29.85 GiB (97.87%) used: 13.4 GiB (44.9%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 30.5 GiB size: 29.85 GiB (97.87%) used: 20.17 GiB (67.6%)
fs: ext4 dev: /dev/sda3 maj-min: 8:3
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 2 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb1
maj-min: 8:17
Sensors: System Temperatures: cpu: 33.0 C mobo: N/A gpu: radeon temp: 7.0 C
Fan Speeds (RPM): cpu: 2191 fan-2: 645 fan-3: 0 fan-4: 0 fan-5: 0
Power: 12v: N/A 5v: N/A 3.3v: N/A vbat: 3.17
Repos: Packages: 2373 note: see --pkg apt: 2367 lib: 1218 flatpak: 6
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources
1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main
Info: Processes: 269 Uptime: 4d 14h 37m wakeups: 1 Memory: 30.31 GiB used: 3.88 GiB (12.8%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFIThis started today on all my browers, Firefox, Pale Moon and LibreWolf.
I had over 30 updates before shutting down last night.
It does it using the MX Viewer too.
https://imgur.com/1u7Bnmk.png
It also does it when the page is reloaded to see if there are any new posts. It also does it on another machine with MX-21.3.
