SOLVED - MX23.3 KDE - Lost audio after updating
Posted: Fri Jul 26, 2024 3:30 am
System info:
[/code]
Upon booting audio is disabled:
https://i.imgur.com/Qj0KAjH.png
When going into PulseAudio settings I see this:
https://i.imgur.com/TwpKxnf.png
The Family17h/19h is my audio controller. In the past it happened already that audio was disabled at start-up, however another reboot fixed it.
Now, when I try to change the Audio Controller Profile (see last screenshot) I see:
- Analog Stereo Duplex (unavailable)
- Analog Stero Output (unplugged) (unavailable)
I played a bit with these settings at no avail.
Any idea how to debug it? Actually this is a major issue for me, if I can't find a way to fix it I need to change distro which is something I am really not happy about.
Thanks.
Code: Select all
[CODE]System:
Kernel: 6.1.0-23-amd64 [6.1.99-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-23-amd64 root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.3_KDE_x64 Libretto May
19 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop Mobo: ASRock model: A300M-STX serial: <superuser required>
UEFI: American Megatrends v: P3.60 date: 10/28/2019
CPU:
Info: model: AMD Ryzen 5 3400G with Radeon Vega Graphics bits: 64 type: MT MCP arch: Zen/Zen+
note: check gen: 1 level: v3 note: check built: 2019 process: GF 12nm family: 0x17 (23)
model-id: 0x18 (24) stepping: 1 microcode: 0x8108102
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1400 min/max: 1400/3700 boost: enabled scaling: driver: acpi-cpufreq
governor: ondemand cores: 1: 1400 2: 1400 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 8: 1400
bogomips: 59198
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: disabled; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series] driver: amdgpu
v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s
lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 05:00.0 chip-ID: 1002:15d8
class-ID: 0300 temp: 46.0 C
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi gpu: amdgpu display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Acer SA270 serial: <filter> built: 2021
res: 1920x1080 hz: 75 dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Vega 11 Graphics (raven LLVM
15.0.6 DRM 3.49 6.1.0-23-amd64) direct-render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 16 bus-ID: 05:00.1 chip-ID: 1002:15de class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.1.0-23-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s
lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-3.1:8 chip-ID: 8087:0029
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
sub-v: 2090 hci-v: 5.2 rev: 2090
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 8.64 TiB used: 111.62 GiB (1.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SA2000M8250G size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: S5Z42105 temp: 39.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Kingston model: SA2000M8250G size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: S5Z42105 temp: 43.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWL120 size: 1.82 TiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 0A
scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate model: Expansion size: 3.64 TiB
block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 0712 scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 2E
scheme: GPT
ID-6: /dev/sdd maj-min: 8:48 type: USB vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB
block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400 serial: <filter> rev: 2501
scheme: GPT
Partition:
ID-1: / raw-size: 231.62 GiB size: 226.92 GiB (97.97%) used: 111.35 GiB (49.1%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 278.9 MiB (28.7%) fs: ext4
dev: /dev/nvme1n1p2 maj-min: 259:6
ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme1n1p1 maj-min: 259:5
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 5 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 45.2 C mobo: N/A gpu: amdgpu temp: 45.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2608 libs: 1385 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/megasync.list
1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_12/ ./
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://nl.mxrepo.com/mx/repo/ bookworm main non-free
2: deb http://nl.mxrepo.com/mx/repo/ bookworm ahs
Info:
Processes: 277 Uptime: 5m wakeups: 1 Memory: 21.43 GiB used: 1.48 GiB (6.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Upon booting audio is disabled:
https://i.imgur.com/Qj0KAjH.png
When going into PulseAudio settings I see this:
https://i.imgur.com/TwpKxnf.png
The Family17h/19h is my audio controller. In the past it happened already that audio was disabled at start-up, however another reboot fixed it.
Now, when I try to change the Audio Controller Profile (see last screenshot) I see:
- Analog Stereo Duplex (unavailable)
- Analog Stero Output (unplugged) (unavailable)
I played a bit with these settings at no avail.
Any idea how to debug it? Actually this is a major issue for me, if I can't find a way to fix it I need to change distro which is something I am really not happy about.
Thanks.