Page 1 of 1
Unable to set new alarm in Kalarm
Posted: Mon Jul 22, 2024 8:57 am
by JanTrix
The Button NEW is greyed out. Kalarm Version 3.5.4.2
Maybe someone has an idea what's missing.
Operating System: MX Linux 23
KDE Plasma Version: 5.27.5
KDE Frameworks Version: 5.103.0
Qt Version: 5.15.8
Kernel Version: 6.1.0-23-amd64 (64-bit)
Graphics Platform: X11
Processors: 12 × AMD Ryzen 5 3600 6-Core Processor
Memory: 31.3 GiB of RAM
Graphics Processor: NVIDIA GeForce RTX 3060/PCIe/SSE2
Manufacturer: ASUS
Re: Unable to set new alarm in Kalarm
Posted: Mon Jul 22, 2024 9:42 am
by Eadwine Rose
With all help requests, please share your full Quick System Info, found in the menu under Favorites. Press the Copy for forum button, then click paste in a reply. If need be, you can do this with the LiveUSB, thanks.
Re: Unable to set new alarm in Kalarm
Posted: Mon Jul 22, 2024 9:44 am
by JanTrix
Code: Select all
System:
Kernel: 6.1.0-23-amd64 [6.1.99-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-23-amd64 root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.3_KDE_x64 Libretto May
19 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME B550-PLUS v: Rev X.0x serial: <superuser required>
UEFI: American Megatrends v: 3404 date: 10/07/2023
CPU:
Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701030
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB
desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2364 high: 4177 min/max: 2200/4208 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 4177 6: 2200
7: 2200 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200 bogomips: 86230
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: always-on; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK driver: nvidia
v: 535.183.01 non-free: 530.xx+ status: current (as of 2023-03) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 06:00.0
chip-ID: 10de:2504 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: nvidia unloaded: fbdev,modesetting,nouveau,vesa alternate: nv gpu: nvidia display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 95 s-size: 513x292mm (20.20x11.50") s-diag: 590mm (23.24")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 96 size: 510x290mm (20.08x11.42")
diag: 587mm (23.1") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 535.183.01 renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: NVIDIA GA106 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel bus-ID: 3-2:2
v: kernel pcie: chip-ID: 08bb:2902 class-ID: 0300 gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 06:00.1
chip-ID: 10de:228e class-ID: 0403
Device-2: Texas Instruments PCM2902 Audio Codec type: USB
driver: hid-generic,snd-usb-audio,usbhid
API: ALSA v: k6.1.0-23-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK PRIME B450M-A
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 05:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.39 TiB used: 600.44 GiB (42.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 046 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Intenso model: SSD size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0A0 scheme: GPT
Partition:
ID-1: / raw-size: 465.51 GiB size: 457.13 GiB (98.20%) used: 136.16 GiB (29.8%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 39.2 C mobo: N/A gpu: nvidia temp: 45 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Repos:
Packages: 2998 pm: dpkg pkgs: 2991 libs: 1636 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 7
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bookworm main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/vscodium.list
1: deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium main
Info:
Processes: 292 Uptime: 3h 44m wakeups: 1 Memory: 31.25 GiB used: 3.51 GiB (11.2%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: Unable to set new alarm in Kalarm [Solved]
Posted: Thu Jul 25, 2024 7:17 am
by JanTrix
After a few days, the "New" button was no longer grayed out and I was able to create new alarms. I have no idea why it didn't work at first and why it works now. So the problem has been solved.