Page 1 of 2

Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 6:06 am
by JUSTIN_S
Unable to install KYOCERA FS1060DN network printer
Hi everyone,

I'm trying to install a KYOCERA FS1060DN network printer on my MX Linux system. with ppd file , but I'm running into an error when I try to print.

The error message is:

File "/usr/lib/cups/filter/rastertokpsl" not available: No such file or directory
I don't know how to install rastertokpsl package, but it doesn't seem to be available for my system. I'm using MX Linux 21 (stable).
Any suggestions on how to fix this?
On the previous installation of MX 19, the printer worked properly


Code: Select all

System:
  Kernel: 6.5.0-1mx-ahs-amd64 [6.5.3-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.0-1mx-ahs-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=3735552
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.2_ahs_x64 Libretto October 15  2023 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop Mobo: GIGABYTE model: MMLP5AP-00 v: 1.x serial: <superuser required>
    UEFI: American Megatrends v: F5 date: 02/19/2014
CPU:
  Info: model: Intel Core i5-4200U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
    microcode: 0x26
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1511 high: 2300 min/max: 800/2600 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 2300 2: 1197 3: 1536 4: 1011 bogomips: 18358
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Haswell-ULT Integrated Graphics vendor: Gigabyte driver: i915 v: kernel
    arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: HDMI-A-1 empty: DP-1,HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:0a16 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1080 s-dpi: 96 s-size: 677x285mm (26.65x11.22") s-diag: 735mm (28.92")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: LG (GoldStar) ULTRAWIDE serial: <filter> built: 2016
    res: 2560x1080 hz: 60 dpi: 97 gamma: 1.2 size: 673x284mm (26.5x11.18") diag: 730mm (28.8") modes:
    max: 2560x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel HD Graphics 4400 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Haswell-ULT HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
    bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
  Device-2: Intel 8 Series HD Audio vendor: Gigabyte 8 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
  API: ALSA v: k6.5.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 2.29 TiB used: 902.36 GiB (38.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 2TB size: 1.82 TiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 model: MM-512GB size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9A0 scheme: GPT
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 71.65 GiB (15.3%) fs: ext4
    dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 19.54 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 64.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2288 pm: dpkg pkgs: 2272 libs: 1175 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 16
  Active apt repos in: /etc/apt/sources.list
    1: deb https://www.bchemnet.com/suldr/ debian extra
    2: deb https://www.bchemnet.com/suldr/ debian extra
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian/ bookworm-updates non-free-firmware non-free contrib main
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.icm.edu.pl/pub/Linux/dist/antix-workspace/mx/repo/ bookworm non-free main
    2: deb http://ftp.icm.edu.pl/pub/Linux/dist/antix-workspace/mx/repo/ bookworm ahs
Info:
  Processes: 244 Uptime: 45m wakeups: 1 Memory: 15.54 GiB used: 2.88 GiB (18.5%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 7:22 am
by j2mcgreg
Have you seen this topic from the Ubuntu forums where the author discusses how to obtain and install
"rastertokpsl"?

https://askubuntu.com/questions/512046/ ... ups-filter

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 7:40 am
by Charlie Brown
From its support site (or wherever you downloaded the file to install) there must be a tar.gz according to your preferred language, that file is within that tar.gz, you just need to extract (i.e.) and copy into /usr/lib/cups/filter/

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:08 am
by JUSTIN_S
I did everything and it doesn't work, now there is a message - File "/usr/lib/cups/filter/rastertokpsl" has insecure permissions (0100775/uid=1000/gid=1000).

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:27 am
by Charlie Brown

Code: Select all

sudo chmod 755 /usr/lib/cups/filter/rastertokpsl ; sudo chown root:root /usr/lib/cups/filter/rastertokpsl

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:38 am
by JUSTIN_S
I changed the permissions of the rastertokpsl file to 100755 and the error message no longer appears. Unfortunately, the printer does not print anything

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:40 am
by Charlie Brown
Then.. the installation is complete at least (it sounds like) .. but it's another issue ... Maybe you try with the most recent (just while you're at it) Liquorix kernel from MXPI ...

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:47 am
by JUSTIN_S
MXPI ????

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 9:53 am
by Eadwine Rose
MX Package Installer

Re: Unable to install KYOCERA FS1060DN network printer

Posted: Mon May 06, 2024 10:12 am
by JUSTIN_S
I didn't find anything in the package installer. Please help