Page 1 of 1
Long reboot/shutdown delay with plymouth message
Posted: Wed Mar 27, 2024 1:52 pm
by popjah
Hi all,
In the last few days, I've had a recurring issue whenever I'm rebooting or shutting down. It doesn't happen every single time, but at least every 3-4 times, and I'm not able to pinpoint what triggers it.
The message I get, when I press Esc to see why the delay, is only these two lines:
Code: Select all
] Started plymouth-r...ow Plymouth Reboot Screen.
] Job session-2.scope/stop running (40s / no limit)
The seconds number changes, of course, but after 1 minute and 30 seconds, the machine reboots or shuts down fine.
I am using the 6.7.10-3-liquorix-amd64 kernel
Thanks for any help on this!
Re: Long reboot/shutdown delay with plymouth message
Posted: Wed Mar 27, 2024 4:42 pm
by CharlesV
if you still have your previous kernel loaded, see if that one has this issue too. There appears to be a few people on the 6.7.x kernel with some shutdown issues.
And Please post your QSI ( MX Menu | Quick System Info | Copy for Forum | paste here )
Re: Long reboot/shutdown delay with plymouth message
Posted: Wed Mar 27, 2024 4:50 pm
by popjah
Thanks, CharlesV, here is my QSI:
Code: Select all
System:
Kernel: 6.7.10-3-liquorix-amd64 [6.7-16~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
intel_pstate=disable rcupdate.rcu_expedited=1 BOOT_IMAGE=/boot/vmlinuz-6.7.10-3-liquorix-amd64
root=UUID=<filter> ro quiet splash init=/lib/systemd/systemd
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.2_ahs_x64 Libretto January 21 2024 base: Debian GNU/Linux
12 (bookworm)
Machine:
Type: Desktop System: Gigabyte product: A320M-S2H v: N/A serial: <superuser required>
Mobo: Gigabyte model: A320M-S2H-CF v: x.x serial: <superuser required> UEFI: American
Megatrends LLC. v: F56b date: 02/09/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
charge: 50% (should be ignored) rechargeable: yes status: N/A
CPU:
Info: model: AMD Ryzen 5 1500X bits: 64 type: MT MCP arch: Zen level: v3 note: check
built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 1 stepping: 1 microcode: 0x8001138
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 3578 high: 3593 min/max: N/A cores: 1: 3580 2: 3593 3: 3593 4: 3593 5: 3593
6: 3493 7: 3593 8: 3593 bogomips: 55894
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow mitigation: Safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 525.147.05 non-free: 530.xx+
status: current (as of 2023-03) arch: Pascal code: GP10x process: TSMC 16nm built: 2016-21 pcie:
gen: 3 speed: 8 GT/s lanes: 4 link-max: lanes: 16 bus-ID: 08:00.0 chip-ID: 10de:1c82
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
Monitor-1: HDMI-0 res: 1920x1080 dpi: 102 size: 480x270mm (18.9x10.63") diag: 551mm (21.68")
modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.147.05 renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 4 link-max: lanes: 16 bus-ID: 08:00.1 chip-ID: 10de:0fb9 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 16 bus-ID: 0a:00.3 chip-ID: 1022:1457 class-ID: 0403
API: ALSA v: k6.7.10-3-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU] type: USB driver: rtl8xxxu bus-ID: 3-1:2
chip-ID: 2357:0109 class-ID: 0000 serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 3.89 TiB used: 33.09 GiB (0.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Gigabyte model: GP-GSM2NE3100TNTD size: 953.87 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: EDFMB0.5 temp: 32.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-75WN4A1 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 7113 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC43 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 0E
scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Biostar model: S100-256GB size: 238.47 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: V4.7 scheme: GPT
Partition:
ID-1: / raw-size: 953.62 GiB size: 937.58 GiB (98.32%) used: 33.09 GiB (3.5%) fs: ext4
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 31.2 C mobo: 24.0 C gpu: nvidia temp: 26 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Repos:
Packages: pm: dpkg pkgs: 2440 libs: 1345 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.easyname.at/mxlinux-packages/mx/repo/ bookworm main non-free
2: deb http://mirror.easyname.at/mxlinux-packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https://download.onlyoffice.com/repo/debian squeeze main
Info:
Processes: 343 Uptime: 1h 56m wakeups: 7 Memory: 15.54 GiB used: 2.74 GiB (17.6%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: Long reboot/shutdown delay with plymouth message
Posted: Wed Mar 27, 2024 6:07 pm
by popjah
Update:
So, I just shut it down (same kernel) and it shut down normally; I then rebooted it, and it rebooted normally.
I have no idea what is triggering the issue mentioned in this post. No external HDs or USBs attached, no peripherals or networked drives either.