MX Linux Forum

Code: Select all

System:    Kernel: 6.1.0-10mx-ahs2-amd64 [6.1.38-2~mx21ahs] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10mx-ahs2-amd64 root=UUID=<filter> ro quiet 
           splash 
           Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM 
           Distro: MX-21.3_KDE_x64 Wildflower January 15  2023 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASUSTeK model: PRIME B350M-A v: Rev X.0x serial: <filter> 
           UEFI-[Legacy]: American Megatrends v: 5603 date: 07/28/2020 
CPU:       Info: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ family: 17 (23) 
           model-id: 8 stepping: 2 microcode: 800820D cache: L2: 4 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 102197 
           Speed: 1374 MHz min/max: 1550/3200 MHz boost: enabled Core speeds (MHz): 1: 1374 
           2: 1550 3: 1550 4: 1550 5: 1610 6: 1550 7: 1550 8: 1550 9: 1550 10: 1550 11: 1550 
           12: 1550 13: 2764 14: 1550 15: 1550 16: 1550 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: mmio_stale_data status: Not affected 
           Type: retbleed mitigation: untrained return thunk; SMT vulnerable 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB 
           filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GP107 [GeForce GTX 1050] vendor: ASUSTeK driver: nvidia v: 525.116.04 
           bus-ID: 09:00.0 chip-ID: 10de:1c81 class-ID: 0300 
           Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: loaded: nvidia 
           unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 93 s-size: 524x292mm (20.6x11.5") 
           s-diag: 600mm (23.6") 
           Monitor-1: DVI-D-0 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5") 
           diag: 598mm (23.5") 
           OpenGL: renderer: NVIDIA GeForce GTX 1050/PCIe/SSE2 v: 4.6.0 NVIDIA 525.116.04 
           direct render: Yes 
Audio:     Device-1: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK driver: snd_hda_intel 
           v: kernel bus-ID: 09:00.1 chip-ID: 10de:0fb9 class-ID: 0403 
           Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus-ID: 0b:00.3 chip-ID: 1022:1457 class-ID: 0403 
           Sound Server-1: ALSA v: k6.1.0-10mx-ahs2-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: f000 bus-ID: 07:00.0 
           chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.14 TiB used: 465.53 GiB (39.8%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: A-Data model: SX8200PNP size: 238.47 GiB 
           block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD 
           serial: <filter> rev: 32B2T6TA temp: 30.9 C scheme: MBR 
           ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB 
           block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: CC43 scheme: GPT 
Partition: ID-1: / raw-size: 215.96 GiB size: 211.51 GiB (97.94%) used: 11.86 GiB (5.6%) fs: ext4 
           dev: /dev/nvme0n1p1 maj-min: 259:1 
           ID-2: /home raw-size: 14.65 GiB size: 14.32 GiB (97.74%) used: 2.6 GiB (18.2%) fs: ext4 
           dev: /dev/nvme0n1p3 maj-min: 259:3 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 7.86 GiB used: 24.8 MiB (0.3%) priority: -2 
           dev: /dev/nvme0n1p2 maj-min: 259:2 
Sensors:   Message: No sensor data found. Is lm-sensors configured? 
Repos:     Packages: note: see --pkg apt: 2502 lib: 1414 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mx.debian.nz/mx/repo/ bullseye main non-free
           2: deb http://mx.debian.nz/mx/repo/ bullseye ahs
Info:      Processes: 310 Uptime: 53m wakeups: 1 Memory: 7.68 GiB used: 5.09 GiB (66.2%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)