no package support for canon I-SENSYS-LBP-6030p

[ahmed]

i hope that in next mx release they add package support for canon I-SENSYS-LBP-6030p because the canon printer failed to print test page on mx linux 21.3 with my lenovo desktop pc
here is the direct link of packagge https://fr.canon-cna.com/support/consum ... 20(64-bit)

[BitterTruth]

Have you tried installing it yourself? If not:

1) Download the package to your Downloads directory
2) Extract the package (right click and extract here)
3) Go into the extracted directory and you will see a file called install.sh
4) Right click (away from the) and choose open terminal here. If you want, you can also just open a terminal and navigate to the extrcated directory
5) run the following command

Code: Select all

sudo bash install.sh

You should see:

Code: Select all

This installer is recommended for the following distributions that are currently supported as of the release of this installer:
- Fedora/Ubuntu/CentOS 7.6/Debian 8.11/Debian 9.8 or later

If this installer is run under distributions for which the support period has ended, the installation of additional system libraries may be necessary after driver installation is complete.

Note that an internet connection is required for installation.

Do you want to continue with installation? (y/n)

6) enter y and follow the steps

[ahmed]

i tried it before asking driver support for canon lbp6030b

[j2mcgreg]

The question I have is: Has this printer worked with any Linux distro and if so, which one(s)?

edited to add:
We are going to need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules

[ahmed]

it worked wirth mx linux 19

here is the output of qsi utility :

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.38-2] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: LENOVO product: 10KW005RFM v: Lenovo S510 serial: <superuser required>
    Chassis: type: 3 serial: <superuser required>
  Mobo: LENOVO model: 0x30F617AA v: NOK serial: <superuser required> UEFI-[Legacy]: LENOVO
    v: M0UKT23A date: 08/04/2016
CPU:
  Info: model: Intel Pentium G4400 bits: 64 type: MCP arch: Skylake-S level: v2 built: 2015
    process: Intel 14nm family: 6 model-id: 0x5E (94) stepping: 3 microcode: 0xF0
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 900 min/max: 800/3300 scaling: driver: intel_pstate governor: powersave
    cores: 1: 900 2: 900 bogomips: 13199
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: retbleed mitigation: IBRS
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel HD Graphics 510 vendor: Lenovo driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: DP-2 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:1902 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69")
  Monitor-1: DP-2 model: Lenovo LEN LI2054A serial: <filter> built: 2016 res: 1440x900 hz: 60
    dpi: 87 gamma: 1.2 size: 419x262mm (16.5x10.31") diag: 494mm (19.5") ratio: 16:10 modes:
    max: 1440x900 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 510 (SKL GT1)
    direct-render: Yes
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 01:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 465.76 GiB used: 13.18 GiB (2.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD5000AZLX-08K2TA0 size: 465.76 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: 1A01 scheme: MBR
Partition:
  ID-1: / raw-size: 292.75 GiB size: 287.09 GiB (98.07%) used: 13.18 GiB (4.6%) fs: ext4
    dev: /dev/sda3 maj-min: 8:3
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 2 GiB used: 2.3 MiB (0.1%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 23.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2313 libs: 1280 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/winehq-bookworm.sources
    1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/debian bookworm main
Info:
  Processes: 199 Uptime: 51m wakeups: 1 Memory: 3.74 GiB used: 2.58 GiB (69.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

[j2mcgreg]

@ahmed
Here's what you have to do:
-- download the 64 bit driver package
-- extract the package so that you can see both the RPM and Debian folders
-- continually open the Debian folder contents until you get to the driver's .deb
--use Deb Installer in MX Tools to install this .deb

[ahmed]

i have done what u asked but nothing changed still the same error look to the attachment