"Failed to fetch" error during update attempt  [Solved]

Help for Current Versions of MX
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
User avatar
FlyBy
Posts: 32
Joined: Wed Apr 08, 2020 9:42 am

"Failed to fetch" error during update attempt

#1 Post by FlyBy »

Hi..
Update failed this morning with the following message...

https://i.imgur.com/l4n56BP.png

Updates were working fine 48hrs ago, I haven't been tinkering (honest) so is this just a temporary glitch in the matrix?

Many thanks

Code: Select all

System:    Kernel: 5.10.0-20-amd64 [5.10.158-2] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-20-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM 
           Distro: MX-21.2.1_KDE_x64 Wildflower September 18  2022 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: HP product: HP Pavilion Gaming Laptop 17-cd0xxx 
           v: Type1ProductConfigId serial: <filter> Chassis: type: 10 serial: <filter> 
           Mobo: HP model: 85FF v: 43.47 serial: <filter> UEFI: Insyde v: F.60 date: 07/22/2022 
Battery:   ID-1: BAT1 charge: 42.3 Wh (100.0%) condition: 42.3/52.5 Wh (80.6%) volts: 12.7 
           min: 11.6 model: Hewlett-Packard PABAS0241231 type: Li-ion serial: <filter> 
           status: Full 
CPU:       Info: 6-Core model: Intel Core i7-9750H bits: 64 type: MT MCP arch: Kaby Lake 
           note: check family: 6 model-id: 9E (158) stepping: A (10) microcode: F0 cache: 
           L2: 12 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399 
           Speed: 800 MHz min/max: 800/4500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable 
           Type: retbleed mitigation: IBRS 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Hewlett-Packard 
           driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300 
           Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q] vendor: Hewlett-Packard 
           driver: nvidia v: 510.85.02 bus-ID: 01:00.0 chip-ID: 10de:1f91 class-ID: 0300 
           Device-3: Cheng Uei Precision Industry (Foxlink) HP Wide Vision HD Integrated Webcam 
           type: USB driver: uvcvideo bus-ID: 1-5:4 chip-ID: 05c8:03bc class-ID: 0e02 
           Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: 
           loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa alternate: nv display-ID: :0 
           screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 128 size: 382x215mm (15.0x8.5") 
           diag: 438mm (17.3") 
           OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 22.0.5 
           direct render: Yes 
Audio:     Device-1: Intel Cannon Lake PCH cAVS vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel alternate: snd_soc_skl,snd_sof_pci bus-ID: 00:1f.3 chip-ID: 8086:a348 
           class-ID: 0403 
           Device-2: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel 
           bus-ID: 01:00.1 chip-ID: 10de:10fa class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-20-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel modules: wl 
           port: 5000 bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Hewlett-Packard driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0 
           chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
Bluetooth: Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8 
           bus-ID: 1-14:5 chip-ID: 8087:0aaa class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1 
           sub-v: 100 hci-v: 5.1 rev: 100 
           Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing, object transfer, audio 
RAID:      Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 
           port: 5060 bus-ID: 00:17.0 chip-ID: 8086.282a rev: 10 class-ID: 0104 
Drives:    Local Storage: total: 1.36 TiB used: 10.05 GiB (0.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 500GB size: 465.76 GiB 
           block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD 
           serial: <filter> rev: 2B4QFXO7 temp: 31.9 C scheme: GPT 
           ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM049-2GH172 size: 931.51 GiB 
           block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: RPM2 scheme: GPT 
Partition: ID-1: / raw-size: 40 GiB size: 39.08 GiB (97.69%) used: 9.97 GiB (25.5%) fs: ext4 
           dev: /dev/nvme0n1p6 maj-min: 259:6 
           ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 85.9 MiB (33.6%) 
           fs: vfat dev: /dev/nvme0n1p5 maj-min: 259:5 
Swap:      Alert: No swap data was found. 
Sensors:   System Temperatures: cpu: 46.0 C mobo: 29.8 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2414 lib: 1369 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
           2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Info:      Processes: 265 Uptime: 32m wakeups: 2 Memory: 15.48 GiB used: 2.28 GiB (14.7%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: UEFI


Moderator: image changed to link, please read the forum rules


"My Idea of help from above is a sniper on the roof"
Top
User avatar
thinkpadx
Posts: 669
Joined: Thu Aug 13, 2020 8:34 pm

Re: "Failed to fetch" error during update attempt

#2 Post by thinkpadx »

sometimes they are slow or late in their updates - the mirrors that is. i rarely have issues but sometimes i close out and try again or wait a little bit and try it and then all is well. that could be your issue.
Top
User avatar
dolphin_oracle
Developer
Posts: 22064
Joined: Sun Dec 16, 2007 12:17 pm

Re: "Failed to fetch" error during update attempt

#3 Post by dolphin_oracle »

could be a bad sync. we will check on it.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
richb
Administrator
Posts: 10854
Joined: Wed Jul 12, 2006 2:17 pm

Re: "Failed to fetch" error during update attempt

#4 Post by richb »

dolphin_oracle wrote: Fri Jan 06, 2023 7:40 am could be a bad sync. we will check on it.
It only seems to be related to plasma-look-and-feel-theme-mx_23.01.01_all.deb. So that may very well be the case.
Forum Rules
Guide - How to Ask for Help

richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB
Top
User avatar
dolphin_oracle
Developer
Posts: 22064
Joined: Sun Dec 16, 2007 12:17 pm

Re: "Failed to fetch" error during update attempt  [Solved]

#5 Post by dolphin_oracle »

this has been mixed on the master servers. the mirrors will catch up as they sync, usually over 24 hours. some of the mirrors have already updated.

user's can switch to mxrepo.com (salt lake city) if they wish via mx-repo-manager.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
FlyBy
Posts: 32
Joined: Wed Apr 08, 2020 9:42 am

Re: "Failed to fetch" error during update attempt

#6 Post by FlyBy »

Very much appreciate the input from everyone. I am now not only fully up to date, but also understand now how such a situation can occur. Big thank you!


"My Idea of help from above is a sniper on the roof"
Top
Post Reply

Return to “MX Help”