Code: Select all
System: Kernel: 5.18.0-4mx-amd64 [5.18.16-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.18.0-4mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.2.1_ahs_x64 Wildflower September 18 2022
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: PRIME Z370-P v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 2401 date: 07/15/2019
CPU: Info: 6-Core model: Intel Core i5-8600K bits: 64 type: MCP arch: Kaby Lake note: check
family: 6 model-id: 9E (158) stepping: A (10) microcode: F0 cache: L2: 9 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 43200
Speed: 1899 MHz min/max: 800/4300 MHz Core speeds (MHz): 1: 1899 2: 800 3: 800 4: 800
5: 800 6: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics: Device-1: NVIDIA TU116 [GeForce GTX 1660 Ti] vendor: ASUSTeK driver: nvidia
v: 510.85.02 bus-ID: 01:00.0 chip-ID: 10de:2182 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6.2:3
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: compton v: 1 driver: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x286mm (40.0x11.3")
s-diag: 1055mm (41.6")
Monitor-1: DP-2 res: 3840x1080 hz: 144 dpi: 82 size: 1196x336mm (47.1x13.2")
diag: 1242mm (48.9")
OpenGL: renderer: NVIDIA GeForce GTX 1660 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 510.85.02
direct render: Yes
Audio: Device-1: Intel 200 Series PCH HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403
Device-2: NVIDIA TU116 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 01:00.1 chip-ID: 10de:1aeb class-ID: 0403
Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6.2:3
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.18.0-4mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: d000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
RAID: Hardware-1: Silicon Image SiI 3132 Serial ATA Raid II Controller driver: sata_sil24
v: kernel port: c000 bus-ID: 05:00.0 chip-ID: 1095.3132 rev: 01 class-ID: 0104
Drives: Local Storage: total: 2.73 TiB used: 19.02 GiB (0.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 4B6Q scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: HD103UJ size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter>
rev: 1118 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: HD103UJ size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter>
rev: 1118 scheme: GPT
Partition: ID-1: / raw-size: 923.25 GiB size: 907.69 GiB (98.31%) used: 18.99 GiB (2.1%) fs: ext4
dev: /dev/sdc2 maj-min: 8:34
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 25.4 MiB (10.1%)
fs: vfat dev: /dev/sdc1 maj-min: 8:33
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdc3
maj-min: 8:35
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 33 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 26%
Repos: Packages: 2067 note: see --pkg apt: 2059 lib: 1068 flatpak: 8
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.plusserver.com/mxlinux/mxlinux/mx/repo/ bullseye main non-free
2: deb http://mirror.plusserver.com/mxlinux/mxlinux/mx/repo/ bullseye ahs
Info: Processes: 252 Uptime: 10m wakeups: 1 Memory: 31.3 GiB used: 2.03 GiB (6.5%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFIWhere are the log files stored in XFCE? I want to look at the startup log, for example, because there are a few warning messages displayed each time. However, to write down too quickly gone again.
Who can help here please.
Greetings
pete67
