Page 1 of 1

Unable to install winehq-staging from Test Repo

Posted: Fri Aug 05, 2022 9:24 pm
by Nite Coder
I was attemping to install the winehq-staging package from testing in order to attempt to run a certain game and was unable to install and apt error out while unpacking one of the packages.
I have both my QSI and Package Installer logs from the install attached below.

Code: Select all

Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Get:4 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye InRelease [6,769 B]
Ign:5 http://dl.google.com/linux/chrome-remote-desktop/deb stable InRelease
Hit:6 http://deb.debian.org/debian bullseye InRelease
Hit:7 http://linux.teamviewer.com/deb stable InRelease
Hit:8 http://dl.google.com/linux/chrome-remote-desktop/deb stable Release
Hit:9 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:10 https://brave-browser-apt-release.s3.brave.com bullseye InRelease
Hit:11 https://packages.microsoft.com/repos/vscode stable InRelease
Hit:12 https://apt.syncthing.net syncthing InRelease
Get:14 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 Packages [326 kB]
Hit:15 https://repo.protonvpn.com/debian stable InRelease
Get:16 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test i386 Packages [315 kB]
Get:17 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test i386 Contents (deb) [1,496 kB]
Hit:13 https://packagecloud.io/AtomEditor/atom/any any InRelease
Get:19 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 Contents (deb) [2,738 kB]
Fetched 4,883 kB in 2s (2,429 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  libcapi20-3 wine-gecko2.47.2 wine-gecko2.47.2:i386 wine-mono7.3.0
  wine-staging wine-staging-amd64 wine-staging-i386:i386
Recommended packages:
  libosmesa6 libcups2:i386 libglu1-mesa:i386 | libglu1:i386 libgtk-3-0:i386
  libodbc1:i386 libosmesa6:i386 libv4l-0:i386 libxcomposite1:i386
  libxslt1.1:i386
The following NEW packages will be installed:
  libcapi20-3 wine-gecko2.47.2 wine-gecko2.47.2:i386 wine-mono7.3.0
  wine-staging wine-staging-amd64 wine-staging-i386:i386 winehq-staging
0 upgraded, 8 newly installed, 0 to remove and 180 not upgraded.
Need to get 256 MB of archives.
After this operation, 716 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bullseye/main amd64 libcapi20-3 amd64 1:3.27-3+b1 [28.5 kB]
Get:2 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bullseye/main i386 wine-gecko2.47.2 i386 2.47.2-1mx21+1 [58.9 MB]
Get:3 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test i386 wine-staging-i386 i386 7.14-1mx21+1 [27.2 MB]
Get:4 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bullseye/main amd64 wine-gecko2.47.2 amd64 2.47.2-1mx21+1 [54.9 MB]
Get:5 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 wine-staging-amd64 amd64 7.14-1mx21+1 [27.4 MB]
Get:6 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 wine-mono7.3.0 all 1.0-1mx21+1 [85.6 MB]
Get:7 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 wine-staging amd64 7.14-1mx21+1 [2,143 kB]
Get:8 http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo bullseye/test amd64 winehq-staging amd64 7.14-1mx21+1 [1,972 B]
Preconfiguring packages ...
Fetched 256 MB in 19s (13.7 MB/s)
Selecting previously unselected package wine-gecko2.47.2:i386.
(Reading database ... 672285 files and directories currently installed.)
Preparing to unpack .../0-wine-gecko2.47.2_2.47.2-1mx21+1_i386.deb ...
Unpacking wine-gecko2.47.2:i386 (2.47.2-1mx21+1) ...
Selecting previously unselected package wine-staging-i386:i386.
Preparing to unpack .../1-wine-staging-i386_7.14-1mx21+1_i386.deb ...
Unpacking wine-staging-i386:i386 (7.14-1mx21+1) ...
Selecting previously unselected package libcapi20-3:amd64.
Preparing to unpack .../2-libcapi20-3_1%3a3.27-3+b1_amd64.deb ...
Unpacking libcapi20-3:amd64 (1:3.27-3+b1) ...
Selecting previously unselected package wine-gecko2.47.2:amd64.
Preparing to unpack .../3-wine-gecko2.47.2_2.47.2-1mx21+1_amd64.deb ...
Unpacking wine-gecko2.47.2:amd64 (2.47.2-1mx21+1) ...
Preparing to unpack .../4-wine-staging-amd64_7.14-1mx21+1_amd64.deb ...
Unpacking wine-staging-amd64 (7.14-1mx21+1) ...
dpkg-deb (subprocess): decompressing archive '/tmp/apt-dpkg-install-K4Ntyv/4-wine-staging-amd64_7.14-1mx21+1_amd64.deb' (size=27445376) member 'data.tar': lzma error: compressed data is corrupt
dpkg-deb: error: <decompress> subprocess returned error exit status 2
dpkg: error processing archive /tmp/apt-dpkg-install-K4Ntyv/4-wine-staging-amd64_7.14-1mx21+1_amd64.deb (--unpack):
 cannot copy extracted data for './opt/wine-staging/lib64/wine/x86_64-unix/msvcr110.dll.so' to '/opt/wine-staging/lib64/wine/x86_64-unix/msvcr110.dll.so.dpkg-new': unexpected end of file or stream
Selecting previously unselected package wine-mono7.3.0.
Preparing to unpack .../5-wine-mono7.3.0_1.0-1mx21+1_all.deb ...
Unpacking wine-mono7.3.0 (1.0-1mx21+1) ...
Selecting previously unselected package wine-staging.
Preparing to unpack .../6-wine-staging_7.14-1mx21+1_amd64.deb ...
Unpacking wine-staging (7.14-1mx21+1) ...
Selecting previously unselected package winehq-staging.
Preparing to unpack .../7-winehq-staging_7.14-1mx21+1_amd64.deb ...
Unpacking winehq-staging (7.14-1mx21+1) ...
Errors were encountered while processing:
 /tmp/apt-dpkg-install-K4Ntyv/4-wine-staging-amd64_7.14-1mx21+1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Hit:1 http://linux.teamviewer.com/deb stable InRelease
Hit:2 http://security.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bullseye InRelease
Ign:5 http://dl.google.com/linux/chrome-remote-desktop/deb stable InRelease
Hit:6 http://deb.debian.org/debian bullseye InRelease
Hit:7 http://dl.google.com/linux/chrome-remote-desktop/deb stable Release
Hit:8 https://brave-browser-apt-release.s3.brave.com bullseye InRelease
Hit:9 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:10 https://packages.microsoft.com/repos/vscode stable InRelease
Hit:12 https://apt.syncthing.net syncthing InRelease
Hit:13 https://repo.protonvpn.com/debian stable InRelease
Hit:11 https://packagecloud.io/AtomEditor/atom/any any InRelease
Reading package lists...
Quick System Info:

Code: Select all

System:
  Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-16-amd64 
  root=UUID=<filter> ro splash 
  Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 
  vt: 7 dm: SDDM Distro: MX-21.1_x64 Wildflower October 20  2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Desktop System: ASUSTeK product: CM6330_CM6630_CM6730_CM6830_M11AA-8 
  v: N/A serial: <filter> 
  Mobo: ASUSTeK model: CM6330_CM6630_CM6730_CM6830_M11AA v: Rev x.0x 
  serial: <filter> UEFI: American Megatrends v: 0704 date: 04/17/2013 
CPU:
  Info: Quad Core model: Intel Core i5-3340S bits: 64 type: MCP 
  arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 
  cache: L2: 6 MiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 22348 
  Speed: 2307 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 2307 2: 2301 
  3: 2370 4: 2465 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
  Type: mds mitigation: Clear CPU buffers; SMT disabled 
  Type: meltdown mitigation: PTI 
  Type: mmio_stale_data status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, 
  STIBP: disabled, RSB filling 
  Type: srbds status: Vulnerable: No microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA GM206 [GeForce GTX 960] vendor: eVga.com. driver: nvidia 
  v: 470.129.06 bus-ID: 01:00.0 chip-ID: 10de:1401 class-ID: 0300 
  Device-2: Microdia USB Live camera type: USB 
  driver: snd-usb-audio,uvcvideo bus-ID: 2-1.3:3 chip-ID: 0c45:6536 
  class-ID: 0102 serial: <filter> 
  Display: x11 server: X.Org 1.20.11 compositor: compton v: 1 driver: 
  loaded: nvidia unloaded: fbdev,modesetting,nouveau,vesa alternate: nv 
  display-ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 4640x1050 s-dpi: 96 s-size: 1228x278mm (48.3x10.9") 
  s-diag: 1259mm (49.6") 
  Monitor-1: HDMI-0 res: 1280x1024 hz: 60 dpi: 86 
  size: 380x305mm (15.0x12.0") diag: 487mm (19.2") 
  Monitor-2: DP-3 res: 1680x1050 hz: 60 dpi: 90 size: 473x296mm (18.6x11.7") 
  diag: 558mm (22") 
  Monitor-3: DP-5 res: 1680x1050 hz: 60 dpi: 90 size: 473x296mm (18.6x11.7") 
  diag: 558mm (22") 
  OpenGL: renderer: NVIDIA GeForce GTX 960/PCIe/SSE2 
  v: 4.6.0 NVIDIA 470.129.06 direct render: Yes 
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio 
  vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 
  chip-ID: 8086:1c20 class-ID: 0403 
  Device-2: NVIDIA GM206 High Definition Audio vendor: eVga.com. 
  driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:0fba 
  class-ID: 0403 
  Device-3: Microdia USB Live camera type: USB 
  driver: snd-usb-audio,uvcvideo bus-ID: 2-1.3:3 chip-ID: 0c45:6536 
  class-ID: 0102 serial: <filter> 
  Device-4: Texas Instruments PCM2900C Audio CODEC type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus-ID: 2-1.4:4 
  chip-ID: 08bb:29c0 class-ID: 0300 
  Device-5: Kingston HyperX 7.1 Audio type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus-ID: 2-1.5:5 
  chip-ID: 0951:16a4 class-ID: 0300 serial: <filter> 
  Sound Server-1: ALSA v: k5.10.0-16-amd64 running: yes 
  Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel 
  port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 1.83 TiB used: 283.34 GiB (15.1%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500DM002-1SB10A 
  size: 465.76 GiB block-size: physical: 4096 B logical: 512 B 
  speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: CC43 temp: 42 C 
  scheme: MBR 
  ID-2: /dev/sdb maj-min: 8:16 vendor: Silicon Power 
  model: SPCC Solid State Disk size: 476.94 GiB block-size: physical: 512 B 
  logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 4A0 
  temp: 40 C scheme: GPT 
  ID-3: /dev/sdc maj-min: 8:32 vendor: HGST (Hitachi) model: HTS721010A9E630 
  size: 931.51 GiB block-size: physical: 4096 B logical: 512 B 
  speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A3T0 scheme: GPT 
Partition:
  ID-1: / raw-size: 195.31 GiB size: 191.19 GiB (97.89%) 
  used: 29.03 GiB (15.2%) fs: ext4 dev: /dev/sdb3 maj-min: 8:19 
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) 
  used: 288 KiB (0.1%) fs: vfat dev: /dev/sdb2 maj-min: 8:18 
  ID-3: /home raw-size: 273.31 GiB size: 267.97 GiB (98.04%) 
  used: 196.71 GiB (73.4%) fs: ext4 dev: /dev/sdb4 maj-min: 8:20 
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 7.81 GiB used: 1024 KiB (0.0%) 
  priority: -2 dev: /dev/sdb1 maj-min: 8:17 
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 62 C 
  Fan Speeds (RPM): N/A gpu: nvidia fan: 6% 
Repos:
  Packages: 4034 note: see --pkg apt: 3996 lib: 2130 flatpak: 38 
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/atom.list 
  1: deb [arch=amd64] https://packagecloud.io/AtomEditor/atom/any/ any main
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
  1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/chrome-remote-desktop.list 
  1: deb [arch=amd64] http://dl.google.com/linux/chrome-remote-desktop/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  No active apt repos in: /etc/apt/sources.list.d/devel:kubic:libcontainers:stable.list 
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
  1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
  Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list 
  1: deb [signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
  Active apt repos in: /etc/apt/sources.list.d/syncthing.list 
  1: deb https://apt.syncthing.net/ syncthing stable
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
  1: deb http://linux.teamviewer.com/deb stable main
  Active apt repos in: /etc/apt/sources.list.d/vscode.list 
  1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info:
  Processes: 250 Uptime: 1h 2m wakeups: 1 Memory: 15.59 GiB 
  used: 3.2 GiB (20.5%) Init: SysVinit v: 2.96 runlevel: 5 default: 5 
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 clang: 11.0.1-2 
  Shell: Bash v: 5.1.4 running-in: quick-system-info-mx 
  inxi: 3.3.06 
Boot Mode: UEFI

Re: Unable to install winehq-staging from Test Repo

Posted: Fri Aug 05, 2022 9:30 pm
by JayM
Change your MX repo to the one in Salt Lake City in MX Repo Manager then do sudo apt update and try installing it again.

Re: Unable to install winehq-staging from Test Repo

Posted: Fri Aug 05, 2022 9:49 pm
by Nite Coder
JayM wrote: Fri Aug 05, 2022 9:30 pm Change your MX repo to the one in Salt Lake City in MX Repo Manager then do sudo apt update and try installing it again.
I got the same result, it seems the main mxrepo also has a corrupt package.

Re: Unable to install winehq-staging from Test Repo

Posted: Fri Aug 05, 2022 11:18 pm
by timkb4cq
Confirmed. Opening that deb wine-staging-amd64_7.14-1mx21+1_amd64.deb (size=27445376) in Midnight Commander also shows it is corrupt. I re-downloaded it from the packager's google drive and got the same result. The rest of the debs in the archive seen to be OK.
@mmikeinsantarosa

Re: Unable to install winehq-staging from Test Repo  [Solved]

Posted: Sun Aug 07, 2022 5:46 pm
by mmikeinsantarosa
timkb4cq wrote: Fri Aug 05, 2022 11:18 pm Confirmed. Opening that deb wine-staging-amd64_7.14-1mx21+1_amd64.deb (size=27445376) in Midnight Commander also shows it is corrupt. I re-downloaded it from the packager's google drive and got the same result. The rest of the debs in the archive seen to be OK.
@mmikeinsantarosa
I'll get a fresh MX21 set for 7.14 going.

Re: Unable to install winehq-staging from Test Repo

Posted: Mon Aug 22, 2022 9:25 pm
by Nite Coder
Thank you mmikeinsantarosa, it installs without issue!