Where can I find a complete list of repositories for MX 21.1 - KDE? SOLVED
Posted: Tue Jun 14, 2022 3:59 am
Using the repos that are enabled by default, I am unable to find several applications that I was expecting to use: Amarok, Joplin, Notepadqq, Skanpage, and XNView. The repos that I have enabled are in the Quick System Info file"
I see some additional repos listed on https://mxlinux.org/uncategorized/repos-mx-21/. Should I add these through Sysaptic, and are there other repos that would be useful?
Thank you!
Code: Select all
System:
Kernel: 5.10.0-15-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-15-amd64
root=UUID=<filter> ro quiet
i8042.dumbkbd=1 splash
Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.1_KDE_x64 Wildflower April 9 2022
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Laptop System: HP product: HP Laptop 15-dy2xxx v: N/A
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: HP model: 87FE v: 57.19 serial: <filter> UEFI: AMI v: F.15
date: 09/15/2021
Battery:
ID-1: BAT0 charge: 11.9 Wh (29.2%) condition: 40.7/41.0 Wh (99.3%)
volts: 10.9 min: 11.3 model: HP Primary type: Li-ion serial: <filter>
status: Discharging cycles: 27
CPU:
Info: Quad Core model: 11th Gen Intel Core i5-1135G7 bits: 64
type: MT MCP arch: Tiger Lake family: 6 model-id: 8C (140) stepping: 1
microcode: 9A cache: L2: 8 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 38707
Speed: 1167 MHz min/max: 400/4200 MHz Core speeds (MHz): 1: 1167
2: 971 3: 778 4: 739 5: 859 6: 989 7: 1048 8: 1047
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics]
vendor: Hewlett-Packard driver: i915 v: kernel bus-ID: 0000:00:02.0
chip-ID: 8086:9a49 class-ID: 0300
Device-2: Luxvisions Innotech Limited HP TrueVision HD Camera
type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 30c9:0035
class-ID: fe01 serial: <filter>
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver:
loaded: modesetting unloaded: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 142
size: 344x193mm (13.5x7.6") diag: 394mm (15.5")
OpenGL: renderer: Mesa Intel Xe Graphics (TGL GT2) v: 4.6 Mesa 21.2.5
direct render: Yes
Audio:
Device-1: Intel Tiger Lake-LP Smart Sound Audio
vendor: Hewlett-Packard driver: sof-audio-pci
alternate: snd_hda_intel,snd_sof_pci bus-ID: 0000:00:1f.3
chip-ID: 8086:a0c8 class-ID: 0401
Sound Server-1: ALSA v: k5.10.0-15-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network:
Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtl8821ce v: v5.5.2.1_35598.20191029
modules: rtw88_8821ce,wl port: 3000 bus-ID: 0000:01:00.0
chip-ID: 10ec:c821 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
bus-ID: 1-10:4 chip-ID: 0bda:b00e class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter>
bt-v: 2.1 lmp-v: 4.2 sub-v: 7644 hci-v: 4.2 rev: 829a
Info: acl-mtu: 1021:8 sco-mtu: 255:12
link-policy: rswitch hold sniff park link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller
driver: vmd v: 0.6 port: 4000 bus-ID: 0000:00:0e.0 chip-ID: 8086.9a0b
rev: class-ID: 0104
Drives:
Local Storage: total: 989.13 GiB used: 8.92 GiB (0.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 211210WD temp: 33.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 type: USB model: General USB Flash Disk
size: 57.62 GiB block-size: physical: 512 B logical: 512 B type: SSD
serial: <filter> rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 240.05 GiB size: 235.22 GiB (97.99%)
used: 8.05 GiB (3.4%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%)
used: 274 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 683.21 GiB size: 671.42 GiB (98.27%)
used: 136.3 MiB (0.0%) fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: note: see --pkg apt: 2357 lib: 1306 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates non-free contrib main
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye non-free contrib main
2: deb http://security.debian.org/debian-security/ bullseye-security non-free contrib main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye non-free main
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info:
Processes: 235 Uptime: 1m wakeups: 23 Memory: 15.29 GiB
used: 1.03 GiB (6.7%) Init: SysVinit v: 2.96 runlevel: 5 default: 5
tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: bash
default: Bash v: 5.1.4 running-in: quick-system-info-mx inxi: 3.3.06
Boot Mode: UEFI
Thank you!