Page 1 of 9
MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 2:46 pm
by dolphin_oracle
Feedback for RC1 fluxbox isos go here.
https://mxlinux.org/blog/mx-21-release- ... -purposes/
Be sure to include proper system data, including the output of quick-system-info.
If posting nvidia-installer (ddm-mx) issues, please post the contents of /var/log/ddm.log.
If posting remaster issues, please include the contents of /var/log/live/live-remaster.log
If posting installer issues, please include the contents of /var/log/minstall.log
If posting issues with MX-PackageInstaller “Popular Apps”, please post contents of /var/log/mxpi.log or /var/log/mxpi.log.old (whichever contains the log of your issue).
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 6:24 pm
by Sigi
Repost from closed Beta-2: Please add LibreWolf & Telegram Desktop to Popular Applications.
May be, please think about to set default browser to LibreWolf instead of Firefox for security reasons and FOSS. THX!
https://www.youtube.com/watch?v=BMXrfmRSprM
https://www.youtube.com/watch?v=D_FqyhD1NlE
https://www.youtube.com/watch?v=8LVMkC82jpk&t=842s
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 6:33 pm
by dolphin_oracle
librewolf as default: not happening. telegram-desktop added to pop. apps... sounds good thanks for the suggestion.
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 6:39 pm
by Sigi
Just detected: MX 21-RC1 needs at least 10 GiB space for installation (VirtualBox with EFI enabled).
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 6:42 pm
by SwampRabbit
@dolphin_oracle we'll need to update Telegram first (the Bullseye version has issues) or get a routine to pull it from the actual site and install it that way
https://repology.org/project/telegram-desktop/versions
Honestly the flatpak might be the best way to go for installing this thing
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 6:43 pm
by SwampRabbit
Sigi wrote: Tue Oct 05, 2021 6:39 pm
Just detected: MX 21-RC1 needs at least 10 GiB space for installation (VirtualBox with EFI enabled).
I'm using 6.86GBs on a fresh MX-21 RC1 Xfce install, I doubt MX-FB needs more
Re: MX-21 Fluxbox RC1 feedback
Posted: Tue Oct 05, 2021 11:51 pm
by siamhie
Sigi wrote: Tue Oct 05, 2021 6:39 pm
Just detected: MX 21-RC1 needs at least 10 GiB space for installation (VirtualBox with EFI enabled).
My stock Flux rc1 installed at 4.9 GB. VB is showing 114MB installed from synaptic.
Re: MX-21 Fluxbox RC1 feedback
Posted: Wed Oct 06, 2021 1:16 am
by i_ri
hello dolphin_oracle
install. disk usage reports 5.2GB ; inxi 4.83 GiB
Code: Select all
System: Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox 1.3.7 info: tint2 dm: LightDM 1.26.0
Distro: MX-21_fluxbox_rc1_x64 Wildflower Oct 05 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: HP-Pavilion product: AY022AA-ABA p6330f v: N/A serial: <filter>
Chassis: Hewlett-Packard type: 3 serial: <filter>
Mobo: MSI model: IONA v: 1.0 serial: <filter> BIOS: American Megatrends v: 5.15
date: 06/25/2010
CPU: Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP arch: Nehalem
family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 23410
Speed: 1502 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1923 2: 1914 3: 1963
4: 1747
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0042
Display: x11 server: X.Org 1.20.11 driver: intel resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Sound Server: ALSA v: k5.10.0-8-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: d800 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 28.65 GiB used: 4.86 GiB (17.0%)
ID-1: /dev/sda type: USB vendor: SanDisk model: USB 3.2Gen1 size: 28.65 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
RAID: Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: c080
bus ID: 00:1f.2 chip ID: 8086.2822 rev: 06
Partition: ID-1: / raw size: 27.14 GiB size: 26.55 GiB (97.81%) used: 4.86 GiB (18.3%) fs: ext4
dev: /dev/sda1
ID-2: swap-1 size: 1.50 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda2
Sensors: System Temperatures: cpu: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
Info: Processes: 204 Uptime: 16m Memory: 7.64 GiB used: 1.27 GiB (16.7%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 Fluxbox RC1 feedback
Posted: Wed Oct 06, 2021 5:59 am
by app4soft
gThumb fails in "Segmentation fault" as it was in MX21-beta2
scrot v1.5.x is outdated and buggy - need update to v1.6.x for MX21 release (already in `bullseye-backports`)
Also there are various glitches probably related to
compton, especially visible on
xfce4-terminal startup (I use old PC with integrated GPU)
Re: MX-21 Fluxbox RC1 feedback
Posted: Wed Oct 06, 2021 6:20 am
by chrispop99
app4soft wrote: Wed Oct 06, 2021 5:59 am
gThumb fails in "Segmentation fault" as it was in MX21-beta2
I tested this on several different pieces of hardware when you posted about it in the Beta thread, but it doesn't happen for me.
Are you running live or installed?
Does it do it every time you attempt to view an image?
Does it do it if you open gThumb from the menu?
Can you run gThumb from the terminal to see if there are any clues in the output?
Chris