Upgrading MX 18 to 19 whit fresh install overwrited home folder

Message

#1 Post by **bluedigit** » Fri Mar 20, 2020 8:36 am

Well, this time made me furious! I had problems with audio on displayport to hdmi connector and someone suggested me to upgrade my distro (MX 18) to a more advanced and recent hw/driver oriented (MX 19 ahs)...
Quite a flawless install, but I wanted to keep my Home folder so I choosed to keep files and settings instructing MX to not modify the Home folder.
My Home folder has been overwritten loosing ALL its content (not backed up!)

:lipsrsealed: :lipsrsealed: :lipsrsealed: :lipsrsealed:

BTW... I',m not new to fresh installs, managing partitions and migrations, but this time I've been fooled!!!!

Should I consider it a bug, a mistake of mine or a freaking issue?!?

#2 Post by **dolphin_oracle** » Fri Mar 20, 2020 9:04 am

supply the /var/log/minstall.log and lets see.

#3 Post by **Jerry3904** » Fri Mar 20, 2020 9:28 am

There is not a backed up home folder in there? Something like home_old or home_bak

#4 Post by **bluedigit** » Fri Mar 20, 2020 12:39 pm

ok, here's the log!

Code: Select all

2020-03-19 17:38:45.237 DBG default: Installer version: 20.2
2020-03-19 17:38:45.355 DBG default: check for remastered home demo folder
2020-03-19 17:38:45.355 DBG default: Exec #1: "test -d /live/linux/home/demo"
2020-03-19 17:38:45.362 DBG default: Exit #1: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.409 DBG default: +++ void MInstall::startup() +++
2020-03-19 17:38:45.409 DBG default: Exec #2: "du -sb /live/aufs/boot"
2020-03-19 17:38:45.452 DBG default: Exit #2: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.453 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2020-03-19 17:38:45.453 DBG default: Exec #3: "dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null| od -An -tdI"
2020-03-19 17:38:45.465 DBG default: Exit #3: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.466 DBG default: linuxfs compression type is  "4" compression factor is  31
2020-03-19 17:38:45.466 DBG default: Exec #4: "df /live/linux --output=used --total |tail -n1"
2020-03-19 17:38:45.469 DBG default: Exit #4: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.469 DBG default: linuxfs file size is  5037815741  rootfs file size is  0
2020-03-19 17:38:45.469 DBG default: Minimum space: 268435456 (boot), 5172033469 (root)
2020-03-19 17:38:45.469 DBG default: Exec #5: "uname -m | grep -q i686"
2020-03-19 17:38:45.475 DBG default: Exit #5: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.475 DBG default: Exec #6: "test -d /sys/firmware/efi"
2020-03-19 17:38:45.478 DBG default: Exit #6: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.478 DBG default: uefi = true
2020-03-19 17:38:45.478 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2020-03-19 17:38:45.478 DBG default: Exec #7: "ps -e | grep 'udisksd'"
2020-03-19 17:38:45.488 DBG default: SOut #7: "  19550 ?        00:00:00 udisksd\n"
2020-03-19 17:38:45.488 DBG default: Exit #7: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.488 DBG default: Exec #8: "egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d"
2020-03-19 17:38:45.495 DBG default: SErr #8: "grep: /lib/udev/rules.d: \xC3\x88 una directory\n"
2020-03-19 17:38:45.495 DBG default: Exit #8: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.495 DBG default: Exec #9: "systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'"
2020-03-19 17:38:45.500 DBG default: Exit #9: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.500 DBG default: Exec #10: "mkdir -p /run/udev/rules.d"
2020-03-19 17:38:45.503 DBG default: Exit #10: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.503 DBG default: Exec #11: "echo 'SUBSYSTEM==\"block\", ENV{UDISKS_IGNORE}=\"1\"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules"
2020-03-19 17:38:45.505 DBG default: Exit #11: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.505 DBG default: Exec #12: "udevadm control --reload"
2020-03-19 17:38:45.513 DBG default: Exit #12: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.513 DBG default: Exec #13: "udevadm trigger --subsystem-match=block"
2020-03-19 17:38:45.521 DBG default: Exit #13: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.521 DBG default: +++ void MInstall::setupkeyboardbutton() +++
2020-03-19 17:38:45.521 DBG default: Exec #14: "find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\\n"
2020-03-19 17:38:45.572 DBG default: Exit #14: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.574 DBG default: Exec #15: "locale -a | grep -Ev '^(C|POSIX)\\.?' | grep -E 'utf8|UTF-8'"
2020-03-19 17:38:45.581 DBG default: Exit #15: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:45.582 DBG default: Exec #16: "grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus"
2020-03-19 17:38:48.187 DBG default: Exit #16: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:48.187 DBG default: check for possible snapshot
2020-03-19 17:38:48.187 DBG default: Exec #17: "/bin/ls -1 /home | grep -Ev '(lost\\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]"
2020-03-19 17:38:48.196 DBG default: Exit #17: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:48.196 DBG default: Exec #18: "dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'"
2020-03-19 17:38:48.226 DBG default: Exit #18: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:48.226 DBG default: +++ void MInstall::buildServiceList() +++
2020-03-19 17:38:48.232 DBG default: +++ void MInstall::updatePartitionWidgets() +++
2020-03-19 17:38:48.233 DBG default: Exec #19: "partprobe -s"
2020-03-19 17:38:51.043 DBG default: SOut #19: "/dev/sda: msdos partitions 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2020-03-19 17:38:51.044 DBG default: Exit #19: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.044 DBG default: Exec #20: "blkid -c /dev/null"
2020-03-19 17:38:51.380 DBG default: SOut #20: "/dev/sda2: LABEL=\"rootMX18.2\" UUID=\"02dcc2ce-2479-4675-ac66-79abe0129c22\" TYPE=\"ext4\" PARTUUID=\"8e50d708-02\"\n/dev/sda3: LABEL=\"homeMX\" UUID=\"41b3e2ec-eda1-44e9-a5d0-d30a17782991\" TYPE=\"ext4\" PARTUUID=\"8e50d708-03\"\n/dev/sda4: UUID=\"a0757555-a848-4597-886b-d62858491459\" TYPE=\"swap\" PARTUUID=\"8e50d708-04\"\n/dev/sdb1: LABEL_FATBOOT=\"MX19\" LABEL=\"MX19\" UUID=\"6B8E-C81F\" TYPE=\"vfat\" PARTUUID=\"c3072e18-01\"\n/dev/sdb2: UUID=\"6C1E-B029\" TYPE=\"vfat\" PARTUUID=\"c3072e18-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2020-03-19 17:38:51.380 DBG default: Exit #20: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.389 DBG default: Exec #21: "fdisk -l -o DEVICE,TYPE |grep 'EFI System' |cut -d\\  -f1 | cut -d/ -f3"
2020-03-19 17:38:51.547 DBG default: Exit #21: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.547 DBG default: Exec #22: "lsblk -brno TYPE,NAME,UUID,SIZE,PARTTYPE,FSTYPE,LABEL,MODEL"
2020-03-19 17:38:51.566 DBG default: Exit #22: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.566 DBG default: Exec #23: "blkid /dev/sda | grep -q PTTYPE=\\\"gpt\\\""
2020-03-19 17:38:51.574 DBG default: Exit #23: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.575 DBG default: Exec #24: "blkid /dev/sdb | grep -q PTTYPE=\\\"gpt\\\""
2020-03-19 17:38:51.583 DBG default: Exit #24: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:38:51.583 DBG default: Name Size Model FS | isDisk isGPT isBoot isESP isNative isSwap
2020-03-19 17:38:51.584 DBG default: "sda" 500107862016 "TOSHIBA_MQ01ACF050" "" | true false false false false false
2020-03-19 17:38:51.584 DBG default: "sda2" 32457621504 "" "ext4" | false false false false true false
2020-03-19 17:38:51.584 DBG default: "sda3" 454554550272 "" "ext4" | false false false false true false
2020-03-19 17:38:51.584 DBG default: "sda4" 13094617088 "" "swap" | false false false false true true
2020-03-19 17:38:51.584 DBG default: "sdb" 15606349824 "DataTraveler_G3" "" | true false true false false false
2020-03-19 17:38:51.584 DBG default: "sdb1" 10737418240 "" "vfat" | false false true false false false
2020-03-19 17:38:51.584 DBG default: "sdb2" 4867489792 "" "vfat" | false false true false false false
2020-03-19 17:39:22.783 DBG default: Exec #25: "[ -f /usr/sbin/gparted ] && /usr/sbin/gparted || /usr/bin/partitionmanager"
2020-03-19 17:39:54.076 DBG default: SOut #25: "======================\nlibparted : 3.2\n======================\n"
2020-03-19 17:39:54.078 DBG default: SErr #25: "System has not been booted with systemd as init system (PID 1). Can't operate.\nFailed to connect to bus: L'host non \xC3\xA8 attivo\nToo few arguments.\nToo few arguments.\n/bin/bash: /usr/bin/partitionmanager: File o directory non esistente\n"
2020-03-19 17:39:54.078 DBG default: Exit #25: 127 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:54.078 DBG default: +++ void MInstall::updatePartitionWidgets() +++
2020-03-19 17:39:54.078 DBG default: Exec #26: "partprobe -s"
2020-03-19 17:39:56.041 DBG default: SOut #26: "/dev/sda: msdos partitions 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2020-03-19 17:39:56.042 DBG default: Exit #26: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.042 DBG default: Exec #27: "blkid -c /dev/null"
2020-03-19 17:39:56.135 DBG default: SOut #27: "/dev/sda2: LABEL=\"rootMX18.2\" UUID=\"02dcc2ce-2479-4675-ac66-79abe0129c22\" TYPE=\"ext4\" PARTUUID=\"8e50d708-02\"\n/dev/sda3: LABEL=\"homeMX\" UUID=\"41b3e2ec-eda1-44e9-a5d0-d30a17782991\" TYPE=\"ext4\" PARTUUID=\"8e50d708-03\"\n/dev/sda4: UUID=\"a0757555-a848-4597-886b-d62858491459\" TYPE=\"swap\" PARTUUID=\"8e50d708-04\"\n/dev/sdb1: LABEL_FATBOOT=\"MX19\" LABEL=\"MX19\" UUID=\"6B8E-C81F\" TYPE=\"vfat\" PARTUUID=\"c3072e18-01\"\n/dev/sdb2: UUID=\"6C1E-B029\" TYPE=\"vfat\" PARTUUID=\"c3072e18-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2020-03-19 17:39:56.135 DBG default: Exit #27: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.136 DBG default: Exec #28: "fdisk -l -o DEVICE,TYPE |grep 'EFI System' |cut -d\\  -f1 | cut -d/ -f3"
2020-03-19 17:39:56.262 DBG default: Exit #28: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.263 DBG default: Exec #29: "lsblk -brno TYPE,NAME,UUID,SIZE,PARTTYPE,FSTYPE,LABEL,MODEL"
2020-03-19 17:39:56.274 DBG default: Exit #29: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.274 DBG default: Exec #30: "blkid /dev/sda | grep -q PTTYPE=\\\"gpt\\\""
2020-03-19 17:39:56.282 DBG default: Exit #30: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.282 DBG default: Exec #31: "blkid /dev/sdb | grep -q PTTYPE=\\\"gpt\\\""
2020-03-19 17:39:56.290 DBG default: Exit #31: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:39:56.290 DBG default: Name Size Model FS | isDisk isGPT isBoot isESP isNative isSwap
2020-03-19 17:39:56.290 DBG default: "sda" 500107862016 "TOSHIBA_MQ01ACF050" "" | true false false false false false
2020-03-19 17:39:56.290 DBG default: "sda2" 32457621504 "" "ext4" | false false false false true false
2020-03-19 17:39:56.290 DBG default: "sda3" 454554550272 "" "ext4" | false false false false true false
2020-03-19 17:39:56.290 DBG default: "sda4" 13094617088 "" "swap" | false false false false true true
2020-03-19 17:39:56.290 DBG default: "sdb" 15606349824 "DataTraveler_G3" "" | true false true false false false
2020-03-19 17:39:56.290 DBG default: "sdb1" 10737418240 "" "vfat" | false false true false false false
2020-03-19 17:39:56.291 DBG default: "sdb2" 4867489792 "" "vfat" | false false true false false false
2020-03-19 17:41:30.841 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2180, resource id: 18899884, major code: 40 (TranslateCoords), minor code: 0
2020-03-19 17:47:12.025 DBG default: Exec #32: "x-terminal-emulator -e bash -c \"/sbin/cryptsetup benchmark && echo && read -n 1 -srp 'Press any key to close the benchmark window.'\""
2020-03-19 17:50:25.943 DBG default: SErr #32: "Impossibile connettersi al gestore della sessione: Impossibile connettersi al gestore della sessione: SESSION_MANAGER environment variable not defined\n"
2020-03-19 17:50:25.943 DBG default: Exit #32: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:51:36.744 DBG default: +++ bool MInstall::validateChosenPartitions() +++
2020-03-19 17:51:42.177 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 6645, resource id: 18931332, major code: 40 (TranslateCoords), minor code: 0
2020-03-19 17:51:59.769 DBG default: +++ bool MInstall::validateChosenPartitions() +++
2020-03-19 17:52:13.614 DBG default: +++ bool MInstall::saveHomeBasic() +++
2020-03-19 17:52:13.614 DBG default: +++ void MInstall::cleanup(bool) +++
2020-03-19 17:52:13.614 DBG default: Exec #33: "/bin/umount -l /mnt/antiX/boot/efi"
2020-03-19 17:52:13.627 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 7127, resource id: 18932479, major code: 40 (TranslateCoords), minor code: 0
2020-03-19 17:52:13.635 DBG default: SErr #33: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2020-03-19 17:52:13.635 DBG default: Exit #33: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.635 DBG default: Exec #34: "/bin/umount -l /mnt/antiX/proc"
2020-03-19 17:52:13.640 DBG default: SErr #34: "umount: /mnt/antiX/proc: no mount point specified.\n"
2020-03-19 17:52:13.640 DBG default: Exit #34: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.640 DBG default: Exec #35: "/bin/umount -l /mnt/antiX/sys"
2020-03-19 17:52:13.645 DBG default: SErr #35: "umount: /mnt/antiX/sys: no mount point specified.\n"
2020-03-19 17:52:13.645 DBG default: Exit #35: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.645 DBG default: Exec #36: "/bin/umount -l /mnt/antiX/dev/shm"
2020-03-19 17:52:13.650 DBG default: SErr #36: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2020-03-19 17:52:13.650 DBG default: Exit #36: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.651 DBG default: Exec #37: "/bin/umount -l /mnt/antiX/dev"
2020-03-19 17:52:13.655 DBG default: SErr #37: "umount: /mnt/antiX/dev: no mount point specified.\n"
2020-03-19 17:52:13.655 DBG default: Exit #37: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.655 DBG default: Exec #38: "/bin/umount -l /mnt/antiX/home"
2020-03-19 17:52:13.660 DBG default: SErr #38: "umount: /mnt/antiX/home: no mount point specified.\n"
2020-03-19 17:52:13.660 DBG default: Exit #38: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.660 DBG default: Exec #39: "/bin/umount -lR /mnt/antiX"
2020-03-19 17:52:13.664 DBG default: SErr #39: "umount: /mnt/antiX: not found\n"
2020-03-19 17:52:13.665 DBG default: Exit #39: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:13.665 DBG default: +++ bool MInstall::mountPartition(QString, QString, QString) +++
2020-03-19 17:52:13.665 DBG default: Exec #40: "/bin/mount /dev/sda2 /mnt/antiX -o ro"
2020-03-19 17:52:16.071 DBG default: Exit #40: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.071 DBG default: +++ bool MInstall::mountPartition(QString, QString, QString) +++
2020-03-19 17:52:16.071 DBG default: Exec #41: "/bin/mount /dev/sda3 /mnt/home-tmp -o ro"
2020-03-19 17:52:16.228 DBG default: Exit #41: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.228 DBG default: Exec #42: "/bin/ls -1 /mnt/home-tmp/"
2020-03-19 17:52:16.248 DBG default: Exit #42: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.271 DBG default: Exec #43: "/bin/umount -l /mnt/home-tmp"
2020-03-19 17:52:16.283 DBG default: Exit #43: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.283 DBG default: Exec #44: "rmdir /mnt/home-tmp"
2020-03-19 17:52:16.288 DBG default: Exit #44: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.288 DBG default: Exec #45: "/bin/umount -l /mnt/antiX"
2020-03-19 17:52:16.297 DBG default: Exit #45: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.333 DBG default: +++ bool MInstall::checkTargetDrivesOK() +++
2020-03-19 17:52:16.333 DBG default: +++ void MInstall::cleanup(bool) +++
2020-03-19 17:52:16.333 DBG default: Exec #46: "/bin/umount -l /mnt/antiX/boot/efi"
2020-03-19 17:52:16.339 DBG default: SErr #46: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2020-03-19 17:52:16.339 DBG default: Exit #46: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.339 DBG default: Exec #47: "/bin/umount -l /mnt/antiX/proc"
2020-03-19 17:52:16.342 DBG default: SErr #47: "umount: /mnt/antiX/proc: no mount point specified.\n"
2020-03-19 17:52:16.343 DBG default: Exit #47: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.343 DBG default: Exec #48: "/bin/umount -l /mnt/antiX/sys"
2020-03-19 17:52:16.346 DBG default: SErr #48: "umount: /mnt/antiX/sys: no mount point specified.\n"
2020-03-19 17:52:16.347 DBG default: Exit #48: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.347 DBG default: Exec #49: "/bin/umount -l /mnt/antiX/dev/shm"
2020-03-19 17:52:16.350 DBG default: SErr #49: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2020-03-19 17:52:16.351 DBG default: Exit #49: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.351 DBG default: Exec #50: "/bin/umount -l /mnt/antiX/dev"
2020-03-19 17:52:16.354 DBG default: SErr #50: "umount: /mnt/antiX/dev: no mount point specified.\n"
2020-03-19 17:52:16.354 DBG default: Exit #50: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.355 DBG default: Exec #51: "/bin/umount -l /mnt/antiX/home"
2020-03-19 17:52:16.358 DBG default: SErr #51: "umount: /mnt/antiX/home: no mount point specified.\n"
2020-03-19 17:52:16.358 DBG default: Exit #51: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.359 DBG default: Exec #52: "/bin/umount -lR /mnt/antiX"
2020-03-19 17:52:16.362 DBG default: SErr #52: "umount: /mnt/antiX: not mounted\n"
2020-03-19 17:52:16.363 DBG default: Exit #52: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.363 DBG default: +++ bool MInstall::makePartitions() +++
2020-03-19 17:52:16.363 DBG default: Exec #53: "swapoff /dev/sda3"
2020-03-19 17:52:16.369 DBG default: SErr #53: "swapoff: /dev/sda3: swapoff failed: Argomento non valido\n"
2020-03-19 17:52:16.369 DBG default: Exit #53: 255 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.370 DBG default: Exec #54: "/bin/umount /dev/sda3"
2020-03-19 17:52:16.374 DBG default: SErr #54: "umount: /dev/sda3: not mounted.\n"
2020-03-19 17:52:16.374 DBG default: Exit #54: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.374 DBG default: Exec #55: "swapoff /dev/sda2"
2020-03-19 17:52:16.378 DBG default: SErr #55: "swapoff: /dev/sda2: swapoff failed: Argomento non valido\n"
2020-03-19 17:52:16.378 DBG default: Exit #55: 255 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.378 DBG default: Exec #56: "/bin/umount /dev/sda2"
2020-03-19 17:52:16.382 DBG default: SErr #56: "umount: /dev/sda2: not mounted.\n"
2020-03-19 17:52:16.382 DBG default: Exit #56: 32 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:16.382 DBG default:  ---- PARTITION FORMAT SCHEDULE ----
2020-03-19 17:52:16.382 DBG default: Root: "/dev/sda2" -1
2020-03-19 17:52:16.382 DBG default: Home: "/dev/sda3" 0
2020-03-19 17:52:16.382 DBG default: Swap: "/dev/sda4" 0
2020-03-19 17:52:16.382 DBG default: Boot: "/dev/sda2" 0
2020-03-19 17:52:16.382 DBG default: ESP: "" 0
2020-03-19 17:52:16.382 DBG default: BIOS-GRUB: ""
2020-03-19 17:52:16.385 DBG default: Sleep #1: 1000ms
2020-03-19 17:52:17.436 DBG default: Sleep #1: exit 0
2020-03-19 17:52:17.436 DBG default: Sleep #2: 1000ms
2020-03-19 17:52:18.487 DBG default: Sleep #2: exit 0
2020-03-19 17:52:18.487 DBG default: Sleep #3: 1000ms
2020-03-19 17:52:19.539 DBG default: Sleep #3: exit 0
2020-03-19 17:52:19.539 DBG default: Exec #57: "/sbin/sfdisk /dev/sda --part-type 2 83"
2020-03-19 17:52:19.815 DBG default: SOut #57: "\nThe partition table has been altered.\nCalling ioctl() to re-read partition table.\nThe kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).\nSyncing disks.\n"
2020-03-19 17:52:19.815 DBG default: SErr #57: "Re-reading the partition table failed.: Dispositivo o risorsa occupata\n"
2020-03-19 17:52:19.816 DBG default: Exit #57: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:19.816 DBG default: Sleep #4: 1000ms
2020-03-19 17:52:20.767 DBG default: Sleep #4: exit 0
2020-03-19 17:52:20.768 DBG default: Sleep #5: 1000ms
2020-03-19 17:52:21.719 DBG default: Sleep #5: exit 0
2020-03-19 17:52:21.719 DBG default: Sleep #6: 1000ms
2020-03-19 17:52:22.671 DBG default: Sleep #6: exit 0
2020-03-19 17:52:22.671 DBG default: Exec #58: "partprobe -s"
2020-03-19 17:52:24.351 DBG default: SOut #58: "/dev/sda: msdos partitions 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2020-03-19 17:52:24.351 DBG default: Exit #58: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:24.351 DBG default: Sleep #7: 1000ms
2020-03-19 17:52:25.303 DBG default: Sleep #7: exit 0
2020-03-19 17:52:25.303 DBG default: +++ bool MInstall::formatPartitions() +++
2020-03-19 17:52:25.312 DBG default: +++ bool MInstall::makeLinuxPartition(const QString&, const QString&, bool, const QString&) +++
2020-03-19 17:52:25.312 DBG default: Exec #59: "mkfs.ext4 -F /dev/sda2 -L \"rootMX19\""
2020-03-19 17:52:26.791 DBG default: SOut #59: "Creating filesystem with 7924224 4k blocks and 1982464 inodes\nFilesystem UUID: 22c47cbb-526b-4ab4-b5cb-5cd9a41d2628\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000\n\nAllocating group tables:   0/242\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/242\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (32768 blocks): done\nWriting superblocks and filesystem accounting information:   0/242\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2020-03-19 17:52:26.792 DBG default: SErr #59: "mke2fs 1.44.5 (15-Dec-2018)\n"
2020-03-19 17:52:26.792 DBG default: Exit #59: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:26.792 DBG default: Exec #60: "/sbin/tune2fs -c0 -C0 -i1m /dev/sda2"
2020-03-19 17:52:26.913 DBG default: SOut #60: "tune2fs 1.44.5 (15-Dec-2018)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2020-03-19 17:52:26.913 DBG default: Exit #60: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:26.913 DBG default: Sleep #8: 1000ms
2020-03-19 17:52:27.964 DBG default: Sleep #8: exit 0
2020-03-19 17:52:27.964 DBG default: +++ bool MInstall::mountPartition(QString, QString, QString) +++
2020-03-19 17:52:27.964 DBG default: Exec #61: "/bin/mount /dev/sda2 /mnt/antiX -o defaults,noatime"
2020-03-19 17:52:27.994 DBG default: Exit #61: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.004 DBG default: +++ bool MInstall::mountPartition(QString, QString, QString) +++
2020-03-19 17:52:28.005 DBG default: Exec #62: "/bin/mount /dev/sda3 /mnt/antiX/home -o defaults"
2020-03-19 17:52:28.141 DBG default: Exit #62: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.141 DBG default: Exec #63: "blkid -c /dev/null"
2020-03-19 17:52:28.308 DBG default: SOut #63: "/dev/sda2: LABEL=\"rootMX19\" UUID=\"22c47cbb-526b-4ab4-b5cb-5cd9a41d2628\" TYPE=\"ext4\" PARTUUID=\"8e50d708-02\"\n/dev/sda3: LABEL=\"homeMX\" UUID=\"41b3e2ec-eda1-44e9-a5d0-d30a17782991\" TYPE=\"ext4\" PARTUUID=\"8e50d708-03\"\n/dev/sda4: UUID=\"a0757555-a848-4597-886b-d62858491459\" TYPE=\"swap\" PARTUUID=\"8e50d708-04\"\n/dev/sdb1: LABEL_FATBOOT=\"MX19\" LABEL=\"MX19\" UUID=\"6B8E-C81F\" TYPE=\"vfat\" PARTUUID=\"c3072e18-01\"\n/dev/sdb2: UUID=\"6C1E-B029\" TYPE=\"vfat\" PARTUUID=\"c3072e18-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2020-03-19 17:52:28.308 DBG default: Exit #63: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.308 DBG default: +++ bool MInstall::installLinux(int) +++
2020-03-19 17:52:28.424 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2020-03-19 17:52:28.424 DBG default: Exec #64: "ps -e | grep 'udisksd'"
2020-03-19 17:52:28.444 DBG default: SOut #64: "  19550 ?        00:00:00 udisksd\n"
2020-03-19 17:52:28.445 DBG default: Exit #64: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.445 DBG default: Exec #65: "egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d"
2020-03-19 17:52:28.450 DBG default: SErr #65: "grep: /lib/udev/rules.d: \xC3\x88 una directory\n"
2020-03-19 17:52:28.450 DBG default: Exit #65: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.450 DBG default: Exec #66: "rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules"
2020-03-19 17:52:28.456 DBG default: Exit #66: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.456 DBG default: Exec #67: "udevadm control --reload"
2020-03-19 17:52:28.464 DBG default: Exit #67: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:28.465 DBG default: Exec #68: "partprobe -s"
2020-03-19 17:52:29.415 DBG default: SOut #68: "/dev/sda: msdos partitions 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2020-03-19 17:52:29.415 DBG default: Exit #68: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:52:29.415 DBG default: Sleep #9: 1000ms
2020-03-19 17:52:30.465 DBG default: Sleep #9: exit 0
2020-03-19 17:52:30.466 DBG default: +++ bool MInstall::copyLinux(int) +++
2020-03-19 17:52:30.475 DBG default: "/bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/selinux /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX"
2020-03-19 17:55:41.757 DBG default: Exec #69: "/usr/sbin/live-to-installed /mnt/antiX"
2020-03-19 17:55:42.304 DBG default: SErr #69: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/minstall.desktop\xE2\x80\x99: File o directory non esistente\n"
2020-03-19 17:55:42.316 DBG default: Exit #69: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.316 DBG default: Desktop menu
2020-03-19 17:55:42.316 DBG default: Exec #70: "chroot /mnt/antiX desktop-menu --write-out-global"
2020-03-19 17:55:42.422 DBG default: SErr #70: "chroot: impossibile eseguire il comando \"desktop-menu\": File o directory non esistente\n"
2020-03-19 17:55:42.422 DBG default: Exit #70: 127 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.423 DBG default: Exec #71: "blkid -o value UUID -s UUID /dev/sda2"
2020-03-19 17:55:42.516 DBG default: Exit #71: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.527 DBG default: Exec #72: "blkid -o value UUID -s UUID /dev/sda3"
2020-03-19 17:55:42.534 DBG default: Exit #72: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.534 DBG default: Exec #73: "blkid -o value UUID -s UUID /dev/sda4"
2020-03-19 17:55:42.631 DBG default: Exit #73: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.632 DBG default: Exec #74: "blkid -o value UUID -s UUID /dev/sda2"
2020-03-19 17:55:42.639 DBG default: Exit #74: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.639 DBG default: Create fstab entries for:
2020-03-19 17:55:42.639 DBG default: rootdev "/dev/sda2" "UUID=22c47cbb-526b-4ab4-b5cb-5cd9a41d2628"
2020-03-19 17:55:42.639 DBG default: homedev "/dev/sda3" "UUID=41b3e2ec-eda1-44e9-a5d0-d30a17782991"
2020-03-19 17:55:42.639 DBG default: swapdev "/dev/sda4" "UUID=a0757555-a848-4597-886b-d62858491459"
2020-03-19 17:55:42.639 DBG default: bootdev "/dev/sda2" "UUID=22c47cbb-526b-4ab4-b5cb-5cd9a41d2628"
2020-03-19 17:55:42.640 DBG default: Exec #75: "blkid /dev/sda2 -o value -s TYPE"
2020-03-19 17:55:42.646 DBG default: Exit #75: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.665 DBG default: Exec #76: "blkid /dev/sda3 -o value -s TYPE"
2020-03-19 17:55:42.672 DBG default: Exit #76: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.696 DBG default: Exec #77: "/bin/rm -rf /mnt/antiX/home/demo"
2020-03-19 17:55:42.726 DBG default: Exit #77: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.726 DBG default: Exec #78: "/bin/rm -rf /mnt/antiX/media/sd*"
2020-03-19 17:55:42.731 DBG default: Exit #78: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.731 DBG default: Exec #79: "/bin/rm -rf /mnt/antiX/media/hd*"
2020-03-19 17:55:42.736 DBG default: Exit #79: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 17:55:42.736 DBG default: Exec #80: "guess-hwclock"
2020-03-19 17:55:43.983 DBG default: Exit #80: 0 QProcess::ExitStatus(NormalExit)

#5 Post by **bluedigit** » Fri Mar 20, 2020 12:41 pm

Sorry, I had to split the log file....

Code: Select all

2020-03-19 18:36:26.059 DBG default: +++ void MInstall::setServices() +++
2020-03-19 18:36:26.060 DBG default: Service:  "anacron"
2020-03-19 18:36:26.060 DBG default: Exec #81: "chroot /mnt/antiX update-rc.d anacron enable"
2020-03-19 18:36:29.029 DBG default: Exit #81: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.029 DBG default: Exec #82: "chroot /mnt/antiX systemctl enable anacron"
2020-03-19 18:36:29.189 DBG default: SErr #82: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2020-03-19 18:36:29.189 DBG default: Exit #82: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.189 DBG default: Service:  "cron"
2020-03-19 18:36:29.189 DBG default: Exec #83: "chroot /mnt/antiX update-rc.d cron enable"
2020-03-19 18:36:29.248 DBG default: Exit #83: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.248 DBG default: Exec #84: "chroot /mnt/antiX systemctl enable cron"
2020-03-19 18:36:29.354 DBG default: SErr #84: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2020-03-19 18:36:29.354 DBG default: Exit #84: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.354 DBG default: Service:  "sudo"
2020-03-19 18:36:29.354 DBG default: Exec #85: "chroot /mnt/antiX update-rc.d sudo enable"
2020-03-19 18:36:29.412 DBG default: SErr #85: "Failed to enable unit, unit /lib/systemd/system/sudo.service is masked.\n"
2020-03-19 18:36:29.412 DBG default: Exit #85: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.412 DBG default: Exec #86: "chroot /mnt/antiX systemctl enable sudo"
2020-03-19 18:36:29.525 DBG default: SErr #86: "Synchronizing state of sudo.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable sudo\nFailed to enable unit, unit /lib/systemd/system/sudo.service is masked.\n"
2020-03-19 18:36:29.525 DBG default: Exit #86: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.525 DBG default: Service:  "cpufrequtils"
2020-03-19 18:36:29.525 DBG default: Exec #87: "chroot /mnt/antiX update-rc.d cpufrequtils enable"
2020-03-19 18:36:29.578 DBG default: SErr #87: "Failed to enable unit, unit cpufrequtils.service does not exist.\n"
2020-03-19 18:36:29.578 DBG default: Exit #87: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.578 DBG default: Exec #88: "chroot /mnt/antiX systemctl enable cpufrequtils"
2020-03-19 18:36:29.687 DBG default: SErr #88: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2020-03-19 18:36:29.687 DBG default: Exit #88: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.687 DBG default: Service:  "smartmontools"
2020-03-19 18:36:29.687 DBG default: Exec #89: "chroot /mnt/antiX update-rc.d smartmontools enable"
2020-03-19 18:36:29.763 DBG default: Exit #89: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.763 DBG default: Exec #90: "chroot /mnt/antiX systemctl enable smartmontools"
2020-03-19 18:36:29.878 DBG default: SErr #90: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2020-03-19 18:36:29.878 DBG default: Exit #90: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.878 DBG default: Service:  "acpid"
2020-03-19 18:36:29.878 DBG default: Exec #91: "chroot /mnt/antiX update-rc.d acpid enable"
2020-03-19 18:36:29.948 DBG default: Exit #91: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:29.948 DBG default: Exec #92: "chroot /mnt/antiX systemctl enable acpid"
2020-03-19 18:36:30.067 DBG default: SErr #92: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\n"
2020-03-19 18:36:30.067 DBG default: Exit #92: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.067 DBG default: Service:  "hddtemp"
2020-03-19 18:36:30.067 DBG default: Exec #93: "chroot /mnt/antiX update-rc.d hddtemp enable"
2020-03-19 18:36:30.126 DBG default: SErr #93: "Failed to enable unit, unit hddtemp.service does not exist.\n"
2020-03-19 18:36:30.126 DBG default: Exit #93: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.126 DBG default: Exec #94: "chroot /mnt/antiX systemctl enable hddtemp"
2020-03-19 18:36:30.234 DBG default: SErr #94: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2020-03-19 18:36:30.234 DBG default: Exit #94: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.235 DBG default: Service:  "dbus"
2020-03-19 18:36:30.235 DBG default: Exec #95: "chroot /mnt/antiX update-rc.d dbus enable"
2020-03-19 18:36:30.290 DBG default: Exit #95: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.290 DBG default: Exec #96: "chroot /mnt/antiX systemctl enable dbus"
2020-03-19 18:36:30.398 DBG default: SErr #96: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2020-03-19 18:36:30.398 DBG default: Exit #96: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.398 DBG default: Service:  "saned"
2020-03-19 18:36:30.398 DBG default: Exec #97: "chroot /mnt/antiX update-rc.d saned enable"
2020-03-19 18:36:30.452 DBG default: SErr #97: "Failed to enable unit, unit /lib/systemd/system/saned.service is masked.\n"
2020-03-19 18:36:30.452 DBG default: Exit #97: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.452 DBG default: Exec #98: "chroot /mnt/antiX systemctl enable saned"
2020-03-19 18:36:30.563 DBG default: SErr #98: "Synchronizing state of saned.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable saned\nFailed to enable unit, unit /lib/systemd/system/saned.service is masked.\n"
2020-03-19 18:36:30.563 DBG default: Exit #98: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.563 DBG default: Service:  "haveged"
2020-03-19 18:36:30.563 DBG default: Exec #99: "chroot /mnt/antiX update-rc.d haveged enable"
2020-03-19 18:36:30.616 DBG default: Exit #99: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.616 DBG default: Exec #100: "chroot /mnt/antiX systemctl enable haveged"
2020-03-19 18:36:30.721 DBG default: SErr #100: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2020-03-19 18:36:30.722 DBG default: Exit #100: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.722 DBG default: Service:  "bluetooth"
2020-03-19 18:36:30.722 DBG default: Exec #101: "chroot /mnt/antiX update-rc.d bluetooth enable"
2020-03-19 18:36:30.775 DBG default: Exit #101: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.775 DBG default: Exec #102: "chroot /mnt/antiX systemctl enable bluetooth"
2020-03-19 18:36:30.885 DBG default: SErr #102: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2020-03-19 18:36:30.885 DBG default: Exit #102: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.885 DBG default: Service:  "rsync"
2020-03-19 18:36:30.885 DBG default: Exec #103: "chroot /mnt/antiX update-rc.d rsync enable"
2020-03-19 18:36:30.952 DBG default: Exit #103: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:30.952 DBG default: Exec #104: "chroot /mnt/antiX systemctl enable rsync"
2020-03-19 18:36:31.061 DBG default: SErr #104: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2020-03-19 18:36:31.061 DBG default: Exit #104: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.061 DBG default: Service:  "cups"
2020-03-19 18:36:31.061 DBG default: Exec #105: "chroot /mnt/antiX update-rc.d cups enable"
2020-03-19 18:36:31.117 DBG default: Exit #105: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.117 DBG default: Exec #106: "chroot /mnt/antiX systemctl enable cups"
2020-03-19 18:36:31.229 DBG default: SErr #106: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2020-03-19 18:36:31.229 DBG default: Exit #106: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.229 DBG default: Exec #107: "lspci -d 80ee:beef  | grep -q ."
2020-03-19 18:36:31.256 DBG default: Exit #107: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.256 DBG default: Exec #108: "/bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1"
2020-03-19 18:36:31.263 DBG default: Exit #108: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.263 DBG default: Exec #109: "/bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1"
2020-03-19 18:36:31.270 DBG default: Exit #109: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.270 DBG default: Exec #110: "/bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1"
2020-03-19 18:36:31.277 DBG default: Exit #110: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.278 DBG default: Exec #111: "/bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1"
2020-03-19 18:36:31.284 DBG default: Exit #111: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.284 DBG default: Exec #112: "/bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1"
2020-03-19 18:36:31.291 DBG default: Exit #112: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.291 DBG default: Exec #113: "sed -i 's/WORKGROUP/Gruppolavoro/g' /mnt/antiX/etc/samba/smb.conf"
2020-03-19 18:36:31.314 DBG default: Exit #113: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.314 DBG default: Exec #114: "/bin/mv -f /mnt/antiX/etc/rc5.d/K*smbd /mnt/antiX/etc/rc5.d/S06smbd >/dev/null 2>&1"
2020-03-19 18:36:31.323 DBG default: Exit #114: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.323 DBG default: Exec #115: "/bin/mv -f /mnt/antiX/etc/rc4.d/K*smbd /mnt/antiX/etc/rc4.d/S06smbd >/dev/null 2>&1"
2020-03-19 18:36:31.332 DBG default: Exit #115: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.332 DBG default: Exec #116: "/bin/mv -f /mnt/antiX/etc/rc3.d/K*smbd /mnt/antiX/etc/rc3.d/S06smbd >/dev/null 2>&1"
2020-03-19 18:36:31.339 DBG default: Exit #116: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.339 DBG default: Exec #117: "/bin/mv -f /mnt/antiX/etc/rc2.d/K*smbd /mnt/antiX/etc/rc2.d/S06smbd >/dev/null 2>&1"
2020-03-19 18:36:31.346 DBG default: Exit #117: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.346 DBG default: Exec #118: "/bin/mv -f /mnt/antiX/etc/rc5.d/K*samba-ad-dc /mnt/antiX/etc/rc5.d/S01samba-ad-dc >/dev/null 2>&1"
2020-03-19 18:36:31.353 DBG default: Exit #118: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.353 DBG default: Exec #119: "/bin/mv -f /mnt/antiX/etc/rc4.d/K*samba-ad-dc /mnt/antiX/etc/rc4.d/S01samba-ad-dc >/dev/null 2>&1"
2020-03-19 18:36:31.360 DBG default: Exit #119: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.360 DBG default: Exec #120: "/bin/mv -f /mnt/antiX/etc/rc3.d/K*samba-ad-dc /mnt/antiX/etc/rc3.d/S01samba-ad-dc >/dev/null 2>&1"
2020-03-19 18:36:31.367 DBG default: Exit #120: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.367 DBG default: Exec #121: "/bin/mv -f /mnt/antiX/etc/rc2.d/K*samba-ad-dc /mnt/antiX/etc/rc2.d/S01samba-ad-dc >/dev/null 2>&1"
2020-03-19 18:36:31.374 DBG default: Exit #121: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.374 DBG default: Exec #122: "/bin/mv -f /mnt/antiX/etc/rc5.d/K*nmbd /mnt/antiX/etc/rc5.d/S01nmbd >/dev/null 2>&1"
2020-03-19 18:36:31.381 DBG default: Exit #122: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.381 DBG default: Exec #123: "/bin/mv -f /mnt/antiX/etc/rc4.d/K*nmbd /mnt/antiX/etc/rc4.d/S01nmbd >/dev/null 2>&1"
2020-03-19 18:36:31.389 DBG default: Exit #123: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.389 DBG default: Exec #124: "/bin/mv -f /mnt/antiX/etc/rc3.d/K*nmbd /mnt/antiX/etc/rc3.d/S01nmbd >/dev/null 2>&1"
2020-03-19 18:36:31.396 DBG default: Exit #124: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.397 DBG default: Exec #125: "/bin/mv -f /mnt/antiX/etc/rc2.d/K*nmbd /mnt/antiX/etc/rc2.d/S01nmbd >/dev/null 2>&1"
2020-03-19 18:36:31.404 DBG default: Exit #125: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.404 DBG default: Exec #126: "sed -i 's/'\"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')\"'/mx/' /mnt/antiX/etc/hosts"
2020-03-19 18:36:31.473 DBG default: Exit #126: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.474 DBG default: Exec #127: "echo \"mx\" | cat > /mnt/antiX/etc/hostname"
2020-03-19 18:36:31.482 DBG default: Exit #127: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.482 DBG default: Exec #128: "echo \"mx\" | cat > /mnt/antiX/etc/mailname"
2020-03-19 18:36:31.489 DBG default: Exit #128: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.489 DBG default: Exec #129: "sed -i 's/.*send host-name.*/send host-name \"mx\";/g' /mnt/antiX/etc/dhcp/dhclient.conf"
2020-03-19 18:36:31.517 DBG default: Exit #129: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.517 DBG default: Exec #130: "echo \"bluez.dom\" | cat > /mnt/antiX/etc/defaultdomain"
2020-03-19 18:36:31.525 DBG default: Exit #130: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.526 DBG default: +++ void MInstall::setLocale() +++
2020-03-19 18:36:31.526 DBG default: Update locale
2020-03-19 18:36:31.526 DBG default: Exec #131: "chroot /mnt/antiX /usr/sbin/update-locale \"LANG=it_IT.UTF-8\""
2020-03-19 18:36:31.592 DBG default: Exit #131: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.592 DBG default: Exec #132: "/bin/ln -nfs /usr/share/zoneinfo/Europe/Rome /mnt/antiX/etc/localtime"
2020-03-19 18:36:31.609 DBG default: Exit #132: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.609 DBG default: Exec #133: "/bin/ln -nfs /usr/share/zoneinfo/Europe/Rome /etc/localtime"
2020-03-19 18:36:31.617 DBG default: Exit #133: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.617 DBG default: Exec #134: "echo Europe/Rome > /mnt/antiX/etc/timezone"
2020-03-19 18:36:31.622 DBG default: Exit #134: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.622 DBG default: Exec #135: "echo Europe/Rome > /etc/timezone"
2020-03-19 18:36:31.626 DBG default: Exit #135: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.626 DBG default: Exec #136: "/bin/cp -f /etc/default/rcS /mnt/antiX/etc/default"
2020-03-19 18:36:31.634 DBG default: Exit #136: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.635 DBG default: Exec #137: "echo '0.0 0 0.0\n0\nUTC' > /etc/adjtime"
2020-03-19 18:36:31.638 DBG default: Exit #137: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:31.638 DBG default: Exec #138: "hwclock --hctosys"
2020-03-19 18:36:32.000 DBG default: Exit #138: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.001 DBG default: Exec #139: "/bin/cp -f /etc/adjtime /mnt/antiX/etc/"
2020-03-19 18:36:32.008 DBG default: Exit #139: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.008 DBG default: Exec #140: "sed -i '/data0=/c\\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc"
2020-03-19 18:36:32.013 DBG default: Exit #140: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.014 DBG default: Exec #141: "sed -i '/data0=/c\\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc"
2020-03-19 18:36:32.023 DBG default: Exit #141: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.023 DBG default: Exec #142: "sed -i '/time_format=/c\\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc"
2020-03-19 18:36:32.031 DBG default: Exit #142: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.031 DBG default: Exec #143: "sed -i '/time_format=/c\\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc"
2020-03-19 18:36:32.048 DBG default: Exit #143: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.048 DBG default: Exec #144: "sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences"
2020-03-19 18:36:32.059 DBG default: SErr #144: "sed: impossibile leggere /mnt/antiX/etc/skel/.icewm/preferences: File o directory non esistente\n"
2020-03-19 18:36:32.059 DBG default: Exit #144: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.059 DBG default: Exec #145: "sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init"
2020-03-19 18:36:32.066 DBG default: Exit #145: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.066 DBG default: Exec #146: "sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray"
2020-03-19 18:36:32.073 DBG default: SErr #146: "sed: impossibile leggere /mnt/antiX/etc/skel/.jwm/tray: File o directory non esistente\n"
2020-03-19 18:36:32.073 DBG default: Exit #146: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.073 DBG default: Localize repo
2020-03-19 18:36:32.073 DBG default: Exec #147: "chroot /mnt/antiX localize-repo default"
2020-03-19 18:36:32.327 DBG default: Exit #147: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.327 DBG default: Exec #148: "chroot /mnt/antiX chpasswd"
2020-03-19 18:36:32.624 DBG default: Exit #148: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:32.624 DBG default: Exec #149: "/bin/cp -a /mnt/antiX/etc/skel /mnt/antiX/home"
2020-03-19 18:36:33.200 DBG default: Exit #149: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.200 DBG default: Exec #150: "/bin/mv -f /mnt/antiX/home/skel /mnt/antiX/home/alxmx"
2020-03-19 18:36:33.207 DBG default: Exit #150: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.207 DBG default: Exec #151: "chown -R demo:demo /mnt/antiX/home/alxmx"
2020-03-19 18:36:33.228 DBG default: Exit #151: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.228 DBG default: Exec #152: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/group"
2020-03-19 18:36:33.237 DBG default: Exit #152: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.237 DBG default: Exec #153: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/gshadow"
2020-03-19 18:36:33.243 DBG default: Exit #153: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.243 DBG default: Exec #154: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/passwd"
2020-03-19 18:36:33.248 DBG default: Exit #154: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.248 DBG default: Exec #155: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/shadow"
2020-03-19 18:36:33.253 DBG default: Exit #155: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.253 DBG default: Exec #156: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/slim.conf"
2020-03-19 18:36:33.257 DBG default: SErr #156: "sed: impossibile leggere /mnt/antiX/etc/slim.conf: File o directory non esistente\n"
2020-03-19 18:36:33.257 DBG default: Exit #156: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.258 DBG default: Exec #157: "sed -i 's/demo/alxmx/g' /mnt/antiX/etc/lightdm/lightdm.conf"
2020-03-19 18:36:33.275 DBG default: Exit #157: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.275 DBG default: Exec #158: "sed -i 's/demo/alxmx/g' /mnt/antiX/home/*/.gtkrc-2.0"
2020-03-19 18:36:33.311 DBG default: Exit #158: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.311 DBG default: Exec #159: "sed -i 's/demo/alxmx/g' /mnt/antiX/root/.gtkrc-2.0"
2020-03-19 18:36:33.336 DBG default: Exit #159: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.336 DBG default: Exec #160: "sed -i 's/auto_login/#auto_login/g' /mnt/antiX/etc/slim.conf"
2020-03-19 18:36:33.345 DBG default: SErr #160: "sed: impossibile leggere /mnt/antiX/etc/slim.conf: File o directory non esistente\n"
2020-03-19 18:36:33.345 DBG default: Exit #160: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.345 DBG default: Exec #161: "sed -i 's/default_user /#default_user /g' /mnt/antiX/etc/slim.conf"
2020-03-19 18:36:33.350 DBG default: SErr #161: "sed: impossibile leggere /mnt/antiX/etc/slim.conf: File o directory non esistente\n"
2020-03-19 18:36:33.350 DBG default: Exit #161: 2 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.351 DBG default: Exec #162: "sed -i 's/autologin-user=/#autologin-user=/g' /mnt/antiX/etc/lightdm/lightdm.conf"
2020-03-19 18:36:33.358 DBG default: Exit #162: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.358 DBG default: Exec #163: "touch /mnt/antiX/var/mail/alxmx"
2020-03-19 18:36:33.373 DBG default: Exit #163: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.646 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2020-03-19 18:36:33.646 DBG default:  - Product: MX Linux 19
2020-03-19 18:36:33.646 DBG default:  - Version: 20.2
2020-03-19 18:36:33.646 DBG default:  = Encryption:
2020-03-19 18:36:33.647 DBG default:    - ChainMode: XTS
2020-03-19 18:36:33.647 DBG default:    - Cipher: AES
2020-03-19 18:36:33.647 DBG default:    - IVgenerator: Plain64
2020-03-19 18:36:33.647 DBG default:    - IVhash: SHA-256
2020-03-19 18:36:33.647 DBG default:    - KDFroundTime: 2000
2020-03-19 18:36:33.647 DBG default:    - KernelRNG: urandom
2020-03-19 18:36:33.647 DBG default:    - KeySize: 512
2020-03-19 18:36:33.647 DBG default:    - LUKSkeyHash: SHA-512
2020-03-19 18:36:33.647 DBG default:  = GRUB:
2020-03-19 18:36:33.647 DBG default:    - Install: MBR
2020-03-19 18:36:33.647 DBG default:    - Location: sda
2020-03-19 18:36:33.647 DBG default:  = Localization:
2020-03-19 18:36:33.648 DBG default:    - ClockHours: 24
2020-03-19 18:36:33.648 DBG default:    - LocalClock: false
2020-03-19 18:36:33.648 DBG default:    - Locale: it_IT.UTF-8
2020-03-19 18:36:33.648 DBG default:    - Timezone: Europe/Rome
2020-03-19 18:36:33.648 DBG default:  = Network:
2020-03-19 18:36:33.648 DBG default:    - ComputerName: mx
2020-03-19 18:36:33.648 DBG default:    - Domain: bluez.dom
2020-03-19 18:36:33.648 DBG default:    - Samba: true
2020-03-19 18:36:33.648 DBG default:    - Workgroup: Gruppolavoro
2020-03-19 18:36:33.648 DBG default:  = Services:
2020-03-19 18:36:33.648 DBG default:    - acpid: true
2020-03-19 18:36:33.648 DBG default:    - anacron: true
2020-03-19 18:36:33.648 DBG default:    - bluetooth: true
2020-03-19 18:36:33.648 DBG default:    - cpufrequtils: true
2020-03-19 18:36:33.649 DBG default:    - cron: true
2020-03-19 18:36:33.649 DBG default:    - cups: true
2020-03-19 18:36:33.649 DBG default:    - dbus: true
2020-03-19 18:36:33.649 DBG default:    - haveged: true
2020-03-19 18:36:33.649 DBG default:    - hddtemp: true
2020-03-19 18:36:33.649 DBG default:    - rsync: true
2020-03-19 18:36:33.649 DBG default:    - saned: true
2020-03-19 18:36:33.649 DBG default:    - smartmontools: true
2020-03-19 18:36:33.649 DBG default:    - sudo: true
2020-03-19 18:36:33.649 DBG default:  = Storage:
2020-03-19 18:36:33.649 DBG default:    - BadBlocksCheck: false
2020-03-19 18:36:33.649 DBG default:    - SaveHome: true
2020-03-19 18:36:33.649 DBG default:    - Target: Partitions
2020-03-19 18:36:33.649 DBG default:  = User:
2020-03-19 18:36:33.650 DBG default:    - Autologin: false
2020-03-19 18:36:33.650 DBG default:    - SaveDesktop: false
2020-03-19 18:36:33.650 DBG default:    - Username: alxmx
2020-03-19 18:36:33.650 DBG default: End of configuration.
2020-03-19 18:36:33.650 DBG default: Exec #164: "/bin/sync"
2020-03-19 18:36:33.986 DBG default: Exit #164: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:33.987 DBG default: +++ bool MInstall::installLoader() +++
2020-03-19 18:36:34.001 DBG default: Exec #165: "/bin/ls /mnt/antiX/boot | grep 'initrd.img-3.6'"
2020-03-19 18:36:34.027 DBG default: Exit #165: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:34.038 DBG default: Sleep #10: 1000ms
2020-03-19 18:36:35.089 DBG default: Sleep #10: exit 0
2020-03-19 18:36:35.089 DBG default: Exec #166: "/bin/mount -o bind /dev /mnt/antiX/dev"
2020-03-19 18:36:35.102 DBG default: Exit #166: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:35.102 DBG default: Exec #167: "/bin/mount -o bind /sys /mnt/antiX/sys"
2020-03-19 18:36:35.106 DBG default: Exit #167: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:35.106 DBG default: Exec #168: "/bin/mount -o bind /proc /mnt/antiX/proc"
2020-03-19 18:36:35.110 DBG default: Exit #168: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:35.110 DBG default: Exec #169: "/bin/mount -o bind /run /mnt/antiX/run"
2020-03-19 18:36:35.114 DBG default: Exit #169: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:35.114 DBG default: Installing Grub
2020-03-19 18:36:35.114 DBG default: Exec #170: "grub-install --target=i386-pc --recheck --no-floppy --force --boot-directory=/mnt/antiX/boot /dev/sda"
2020-03-19 18:36:46.518 DBG default: SErr #170: "Installazione per la piattaforma i386-pc.\nInstallazione completata, nessun errore segnalato.\n"
2020-03-19 18:36:46.518 DBG default: Exit #170: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:46.532 DBG default: Exec #171: "/live/bin/non-live-cmdline"
2020-03-19 18:36:46.538 DBG default: Exit #171: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:46.539 DBG default: grubDefault is  "quiet splash"
2020-03-19 18:36:46.539 DBG default: intermediate ("quiet", "quiet", "splash")
2020-03-19 18:36:46.539 DBG default: Add cmdline options to Grub ("quiet", "splash")
2020-03-19 18:36:46.539 DBG default: cmdlinestring "quiet splash"
2020-03-19 18:36:46.539 DBG default: Add cmdline options to Grub
2020-03-19 18:36:46.539 DBG default: Exec #172: "sed -i -r 's|^(GRUB_CMDLINE_LINUX_DEFAULT=).*|\\1\"quiet splash\"|' /mnt/antiX/etc/default/grub"
2020-03-19 18:36:46.747 DBG default: Exit #172: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:46.780 DBG default: Exec #173: "/bin/cp /live/boot-dev/boot/uefi-mt/mtest-64.efi /mnt/antiX/boot/uefi-mt"
2020-03-19 18:36:46.852 DBG default: Exit #173: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:46.862 DBG default: Update Grub
2020-03-19 18:36:46.862 DBG default: Exec #174: "chroot /mnt/antiX update-grub"
2020-03-19 18:36:53.806 DBG default: SErr #174: "Generating grub configuration file ...\nFound theme: /boot/grub/themes/linen/theme.txt\nFound linux image: /boot/vmlinuz-5.4.0-3-amd64\nFound initrd image: /boot/initrd.img-5.4.0-3-amd64\nFound mtest-64.efi image: /boot/uefi-mt/mtest-64.efi\nAdding boot menu entry for EFI firmware configuration\ndone\n"
2020-03-19 18:36:53.806 DBG default: Exit #174: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:36:53.821 DBG default: Update initramfs
2020-03-19 18:36:53.821 DBG default: Exec #175: "chroot /mnt/antiX update-initramfs -u -t -k all"
2020-03-19 18:37:25.609 DBG default: SOut #175: "update-initramfs: Generating /boot/initrd.img-5.4.0-3-amd64\n"
2020-03-19 18:37:25.609 DBG default: SErr #175: "cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries \n    nor crypto modules. If that's on purpose, you may want to uninstall the \n    'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs \n    integration and avoid this warning.\nW: Possible missing firmware /lib/firmware/i915/icl_dmc_ver1_07.bin for module i915\nW: Possible missing firmware /lib/firmware/i915/tgl_dmc_ver2_04.bin for module i915\nW: Possible missing firmware /lib/firmware/i915/bxt_huc_ver01_8_2893.bin for module i915\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2020-03-19 18:37:25.609 DBG default: Exit #175: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.623 DBG default: clear chroot env
2020-03-19 18:37:25.624 DBG default: Exec #176: "/bin/umount /mnt/antiX/proc"
2020-03-19 18:37:25.636 DBG default: Exit #176: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.636 DBG default: Exec #177: "/bin/umount /mnt/antiX/sys"
2020-03-19 18:37:25.641 DBG default: Exit #177: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.641 DBG default: Exec #178: "/bin/umount /mnt/antiX/dev"
2020-03-19 18:37:25.645 DBG default: Exit #178: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.645 DBG default: Exec #179: "/bin/umount /mnt/antiX/run"
2020-03-19 18:37:25.649 DBG default: Exit #179: 0 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.649 DBG default: Exec #180: "mountpoint -q /mnt/antiX/boot/efi"
2020-03-19 18:37:25.656 DBG default: Exit #180: 1 QProcess::ExitStatus(NormalExit)
2020-03-19 18:37:25.667 DBG default: +++ void MInstall::cleanup(bool) +++
2020-03-19 18:37:25.667 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2020-03-19 18:37:25.667 DBG default: Exec #181: "/bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1"

#6 Post by **dolphin_oracle** » Fri Mar 20, 2020 12:48 pm

well the /home partition wasn't formated. the UUID didn't even change. but I do seem some copying to a new user account. are the users names the same?

what's in the /home now.

from the installed system

Code: Select all

ls -l /home

#7 Post by **bluedigit** » Fri Mar 20, 2020 1:05 pm

well, seems we have two home folders?!?!

Code: Select all

alxmx@mx:~
$ ls -l /home
totale 24
drwxr-xr-x 47 alxmx alxmx  4096 mar 19 18:36 alx
drwxr-xr-x 21 alxmx alxmx  4096 mar 20 09:21 alxmx
drwx------  2 root  root  16384 apr 28  2019 lost+found

#8 Post by **Jerry3904** » Fri Mar 20, 2020 1:07 pm

That's what I was asking about

#9 Post by **bluedigit** » Fri Mar 20, 2020 1:10 pm

Ok, so I have lost nothing. I just have to fix the right home folder... Shame on me!

maybe coronavirus reached my brain...

#10 Post by **bluedigit** » Fri Mar 20, 2020 1:18 pm

Thank you dolphin_oracle for support... This should teach me to modify my panic attitude.

MX Linux Forum

Upgrading MX 18 to 19 whit fresh install overwrited home folder

Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder

Re: Upgrading MX 18 to 19 whit fresh install overwrited home folder