Page 9 of 67
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 6:32 am
by i_ri
MX21 live system on,
Code: Select all
System: Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A
parameters: persist_static_root tz=America/Phoenix quiet splasht nosplash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_beta1_x64 Wildflower July 27 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Hewlett-Packard product: HP EliteBook 8440p v: N/A
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Hewlett-Packard model: 172A v: KBC Version 30.35 serial: <filter>
BIOS: Hewlett-Packard v: 68CCU Ver. F.60 date: 11/11/2015
Battery: ID-1: BAT0 charge: 45.6 Wh condition: 47.0/47.0 Wh (100%) volts: 12.3/11.1
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Unknown
CPU: Topology: Dual Core model: Intel Core i5 M 560 bits: 64 type: MT MCP arch: Nehalem
family: 6 model-id: 25 (37) stepping: 5 microcode: 7 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 21284
Speed: 1655 MHz min/max: 1199/2667 MHz boost: enabled Core speeds (MHz): 1: 1499
2: 1376 3: 1402 4: 1412
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0046
Display: x11 server: X.Org 1.20.11 driver: intel
resolution: 1600x900~60Hz, 1280x1024~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Sound Server: ALSA v: k5.10.0-8-amd64
Network: Device-1: Intel 82577LM Gigabit Network vendor: Hewlett-Packard driver: e1000e
v: kernel port: 5020 bus ID: 00:19.0 chip ID: 8086:10ea
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6200 driver: iwlwifi v: kernel port: 5000
bus ID: 43:00.0 chip ID: 8086:4239
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 7.27 GiB used: 2.03 GiB (27.9%)
ID-1: /dev/sda type: USB vendor: Kingston model: DataTraveler 2.0 size: 7.27 GiB
block size: physical: 512 B logical: 512 B speed: <unknown> serial: <filter>
rev: PMAP scheme: MBR
Partition: ID-1: / raw size: N/A size: 3.86 GiB used: 149.6 MiB (3.8%) fs: overlay
source: ERR-102
Sensors: System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 224 Uptime: 2m Memory: 3.64 GiB used: 611.1 MiB (16.4%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Video Tweaks:
pre-sandybridge UXA acceleration
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 6:43 am
by i_ri
MX21 live system on,
Code: Select all
System: Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A
parameters: persist_static_root tz=America/Phoenix quiet splasht nosplash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_beta1_x64 Wildflower July 27 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: P5L8L-SE v: Rev 1.xx serial: <filter>
BIOS: American Megatrends v: 0201 date: 10/09/2007
CPU: Topology: Single Core model: Intel Pentium 4 bits: 64 type: MT arch: Netburst Presler
family: F (15) model-id: 6 stepping: 5 microcode: B L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 bogomips: 13599
Speed: 3400 MHz min/max: N/A Core speeds (MHz): 1: 3400 2: 3400
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel 82945G/GZ Integrated Graphics vendor: ASUSTeK driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:2772
Display: x11 server: X.Org 1.20.11 driver: intel resolution: 1280x1024~60Hz
OpenGL: renderer: Mesa DRI Intel 945G v: 1.4 Mesa 20.3.5 direct render: Yes
Audio: Message: No Device data found.
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK P5B
driver: r8169 v: kernel port: e800 bus ID: 02:00.0 chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Realtek RTL8191SU 802.11n WLAN Adapter type: USB driver: r8712u
bus ID: 5-5:3 chip ID: 0bda:8172 serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 160.66 GiB used: 2.07 GiB (1.3%)
ID-1: /dev/sda vendor: Western Digital model: WD1600YS-01SHB1 size: 153.39 GiB
block size: physical: 512 B logical: 512 B speed: <unknown> serial: <filter>
rev: 6C06 scheme: MBR
ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 2.0 size: 7.27 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR
Partition: ID-1: / raw size: N/A size: 3.86 GiB used: 164.9 MiB (4.2%) fs: overlay
source: ERR-102
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda2
Sensors: Message: No sensors data was found. Is sensors configured?
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 196 Uptime: 3m Memory: 1.93 GiB used: 756.9 MiB (38.3%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Video Tweaks:
pre-sandybridge UXA acceleration
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 6:56 am
by dolphin_oracle
Stufe wrote: Fri Jul 30, 2021 5:31 am
I also note that with the default theme settings, when typing into the search box on MX(start) menu there is no highlight bar to show which item will be run when I press enter.
Also after having typed, the mousepad takes a long time to 'wake up'.
wakup time is configurable in the Mouse & Touchpad settings. by dfeaul its 2 seconds I think. I usually change mine to about .5 seconds.
in whisker, only the first search result doesn't have a highlight. navigating the menu puts a box around other items.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 6:58 am
by i_ri
MX21live system on,
Code: Select all
System: Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_US kbd=us
tz=America/Phoenix
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_beta1_x64 Wildflower July 27 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Acer product: Aspire E5-571 v: V1.04 serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: Acer model: EA50_HB v: V1.04 serial: <filter> UEFI: Insyde v: 1.04
date: 05/06/2014
Battery: ID-1: BAT1 charge: 47.8 Wh condition: 47.8/55.9 Wh (86%) volts: 13.0/11.1
model: SANYO 0032334134314C41 type: Li-ion serial: <filter> status: Charging
CPU: Topology: Dual Core model: Intel Core i3-4030U bits: 64 type: MT MCP arch: Haswell
family: 6 model-id: 45 (69) stepping: 1 microcode: 17 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15165
Speed: 898 MHz min/max: 800/1900 MHz Core speeds (MHz): 1: 943 2: 954 3: 954 4: 939
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Haswell-ULT Integrated Graphics vendor: Acer Incorporated ALI
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0a16
Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa
resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4400 (HSW GT2) v: 4.5 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel Haswell-ULT HD Audio vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:0a0c
Device-2: Intel 8 Series HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:9c20
Sound Server: ALSA v: k5.10.0-8-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 3000 bus ID: 01:00.1
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Lite-On
driver: ath9k v: kernel port: 3000 bus ID: 02:00.0 chip ID: 168c:0036
IF: wlan0 state: up mac: <filter>
Device-3: Lite-On Atheros AR3012 Bluetooth type: USB driver: btusb bus ID: 2-5:5
chip ID: 04ca:300b
Drives: Local Storage: total: 473.03 GiB used: 1.95 GiB (0.4%)
ID-1: /dev/sda vendor: Seagate model: ST500LT012-1DG142 size: 465.76 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter>
rev: SDM1 scheme: GPT
ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 2.0 size: 7.27 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR
Partition: ID-1: / raw size: N/A size: 6.06 GiB used: 64.5 MiB (1.0%) fs: overlay
source: ERR-102
Sensors: System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 227 Uptime: 5m Memory: 7.66 GiB used: 955.3 MiB (12.2%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 7:01 am
by Gaer Boy
dolphin_oracle wrote: Thu Jul 29, 2021 6:40 pm
My Epson scanner is only detected by sane-find-scanner run as root. As user, it returns:
@Gaer Boy could you check to see if adding the saned user to lp and/or plugdev groups helps with your scanner setup issue. you might need to reboot for the changes to take affect.
@dolphin_oracle This had no effect. I think a udev rules entry may work - I'll have to work out where to put it.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 7:09 am
by Stufe
dolphin_oracle wrote: Fri Jul 30, 2021 6:56 am
Stufe wrote: Fri Jul 30, 2021 5:31 am
I also note that with the default theme settings, when typing into the search box on MX(start) menu there is no highlight bar to show which item will be run when I press enter.
Also after having typed, the mousepad takes a long time to 'wake up'.
wakup time is configurable in the Mouse & Touchpad settings. by dfeaul its 2 seconds I think. I usually change mine to about .5 seconds.
in whisker, only the first search result doesn't have a highlight. navigating the menu puts a box around other items.
On the fresh install of 19.4 the mouse does not seem to 'go to sleep' immediately after typing in the search box on the menu.
For the other themes, there is a highlight on even the first search result in the menu.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 7:10 am
by Gaer Boy
Gaer Boy wrote: Thu Jul 29, 2021 2:14 pm
SwampRabbit wrote: Thu Jul 29, 2021 12:59 pm
@Gaer Boy you've changed the icons LibreOffice is using somehow, you can tell from comparing your pic to the one d.o. just shared.
It looks like you have Breeze Dark set. I checked and OOTB it's fine.
Can you go to Tools> Options > LibreOffice - View > Icon style to "Automatic (Colibre)
Confirmed that I have the Breeze Dark, but I didn't change it. That was how it was. I'll try the change tomorrow - I'm back in MX-19 for today because I don't have my backup routines set in MX-21 yet.
@SwampRabbit OK, that sorted the problem. It occurs to me that when I first opened LO i had a new version dialog. I thought I just closed it but I could have changed something.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 7:22 am
by i_ri
Hello dolphin_oracle
This machine, "WallE", will not start MX21,
Code: Select all
System: Host: <filter> Kernel: 4.19.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-16-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19.4_x64 patito feo October 21 2019 base: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop System: HP-Pavilion product: AY022AA-ABA p6330f v: N/A serial: <filter>
Chassis: Hewlett-Packard type: 3 serial: <filter>
Mobo: MSI model: IONA v: 1.0 serial: <filter> BIOS: American Megatrends v: 5.15
date: 06/25/2010
CPU: Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP arch: Nehalem
family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 23409
Speed: 1320 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1301 2: 1286 3: 1283
4: 1235
Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0042
Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel Ironlake Desktop v: 2.1 Mesa 18.3.6
direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Sound Server: ALSA v: k4.19.0-16-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: d800 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 1.82 TiB used: 16.66 GiB (0.9%)
ID-1: /dev/sda vendor: Toshiba model: DT01ACA200 size: 1.82 TiB block size:
physical: 4096 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter>
rev: ABB0 scheme: MBR
RAID: Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: c080
bus ID: 00:1f.2 chip ID: 8086.2822 rev: 06
Partition: ID-1: / raw size: 1.82 TiB size: 1.79 TiB (98.38%) used: 16.66 GiB (0.9%) fs: ext4
dev: /dev/sda1
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8 C mobo: 15.2 C
Fan Speeds (RPM): cpu: 873 fan-2: 893 fan-3: 0
Voltages: 12v: N/A 5v: N/A 3.3v: 3.34 vbat: 3.28
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ buster main contrib non-free
2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 208 Uptime: 3m Memory: 7.66 GiB used: 827.3 MiB (10.6%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
WallE runs mxkde, antiX19, mx19xfce [this qsi.]
The same usb that runs in those other three machines
stops at the bios splash.
With internal drive plugged in it will not give boot menu.
With no internal drive hooked up it will not start nor give boot menu. ;
it is blocked from seeing any bootable devices (but no message cunclusion comes)
it is just locked on the bios splash and goes no further.
usb image is by both mx and antiX live-usb-maker. have done full and dd.; always the same= it starts in three machines and it fails in WallE.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 8:01 am
by dolphin_oracle
Stufe wrote: Fri Jul 30, 2021 7:09 am
dolphin_oracle wrote: Fri Jul 30, 2021 6:56 am
Stufe wrote: Fri Jul 30, 2021 5:31 am
I also note that with the default theme settings, when typing into the search box on MX(start) menu there is no highlight bar to show which item will be run when I press enter.
Also after having typed, the mousepad takes a long time to 'wake up'.
wakup time is configurable in the Mouse & Touchpad settings. by dfeaul its 2 seconds I think. I usually change mine to about .5 seconds.
in whisker, only the first search result doesn't have a highlight. navigating the menu puts a box around other items.
On the fresh install of 19.4 the mouse does not seem to 'go to sleep' immediately after typing in the search box on the menu.
For the other themes, there is a highlight on even the first search result in the menu.
the sleep time on touchpads (not mouse) is new on mx21.
Re: MX-21 beta 1 feedback thread
Posted: Fri Jul 30, 2021 8:09 am
by Leo C.
Hi, I tried installing on an existing MX-19 machine with encrypted root filesystem (and no separate /home partition): although the installer help on the left mentions the "Preserve /home" option, I actually couldn't see that in the drop down list, so I aborted installation. Am I missing something, is the installer unable to preserve /home if root is encrypted, or is this a bug in the installer?
Thanks