Page 1 of 1
MX-21 "ahs" (Xfce) RC3 feedback
Posted: Wed Oct 27, 2021 9:24 am
by dolphin_oracle
Let's try this again
Feedback for MX-21 "ahs" (Xfce) RC3 goes here:
Be sure to include proper system data, including the output of quick-system-info.
If posting nvidia-installer (ddm-mx) issues, please post the contents of /var/log/ddm.log.
If posting remaster issues, please include the contents of /var/log/live/live-remaster.log
If posting installer issues, please include the contents of /var/log/minstall.log
If posting issues with MX-PackageInstaller “Popular Apps”, please post contents of /var/log/mxpi.log or /var/log/mxpi.log.old (whichever contains the log of your issue).
I'm not particularly interested in package install issues unless there is a depend conflict with AHS repo.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Wed Oct 27, 2021 9:10 pm
by spsf64
Running "Live mode"
As I already reported here:
https://forum.mxlinux.org/viewtopic.php ... 01#p658901
I noticed the sharing problem still persists, I cannot create any new file when I share a folder, but can create a folder, however I cannot create any sub-folder inside the new ones.
Suggestions:
1 Maybe ship warpinator as default to solve these samba problems?
2 As libreoffice is shipped by default, why don´t you provide some common templates like NewDoc.odt, NewSheet.ods, etc.. inside the templates folder?
Thanks for this great distro!
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Wed Oct 27, 2021 10:06 pm
by SwampRabbit
@spsf64 is this samba issue localized to MX-21 AHS?
I don’t recall anyone mentioning this for standard MX-21.
I don’t believe that Warpinator (even though I package it for MX) is proper to be included in AHS. AHS is meant to be on par with standard MX-21 Xfce EXCEPT ONLY for the hardware and graphical packages. Also, Warpinator is not cross platform, it is limited to Linux and an unofficial Android app. Samba/SMB is a much more wide spread standard and provides much more interoperability.
I’m not understanding the LibreOffice template thing, can you expand on it more in a separate thread? If it’s some MX default you’re recommending, it should not be specific to AHS either, again not the point of AHS.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 9:06 am
by davemx
Total double whammy! Not only does the RC3 produce exactly the same error on Suspend, (I should have expected that, as I had already tried the 5.14.0-3 kernel previously). Then after I finished looking at it, then tried to run my MX21-KDE partition, that wouldn't run, part way through the plymouth screen, it suddenly dropped to a text screen with the error:
[drm] <<ERROR>> failed to enable link training
I can log in as root (text) from there, and run the display manager, but all attempts to log in fail, they just come back to the DM.
P.S. My system data is in the MX21-ahs-RC1 thread, round about reply #36, having to post from another OS at present.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 10:28 am
by SwampRabbit
@davemx did you check the ISO?
Also please post your QSI, it’s easier and faster than making us go dig it up in the other thread.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 11:34 am
by davemx
SwampRabbit wrote: Thu Oct 28, 2021 10:28 am
@davemx did you check the ISO?
Also please post your QSI, it’s easier and faster than making us go dig it up in the other thread.
I can now, before I had two MX partitions that weren't usable. I've got my XFCE-ahs ready now.
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: H110I-PLUS v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 3805 date: 05/07/2018
CPU: Topology: Dual Core model: Intel Pentium G4600 bits: 64 type: MT MCP arch: Kaby Lake
family: 6 model-id: 9E (158) stepping: 9 microcode: EA L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800
Speed: 800 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 800 2: 800 3: 2381 4: 2313
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel HD Graphics 630 vendor: ASUSTeK driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:5912
Display: x11 server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio: Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:a170
Device-2: Solid Year SW72011 type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-5:3
chip ID: 060b:8038
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: e000 bus ID: 03:00.0
chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-10:9
chip ID: 148f:5370 serial: <filter>
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 1.83 TiB used: 613.04 GiB (32.7%)
ID-1: /dev/sda vendor: SanDisk model: SDSSDH32000G size: 1.82 TiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 10RL temp: 28 C
scheme: GPT
ID-2: /dev/sdb type: USB vendor: SanDisk model: Cruzer Blade size: 14.59 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Partition: ID-1: / raw size: 20.00 GiB size: 19.52 GiB (97.59%) used: 8.62 GiB (44.2%) fs: ext4
dev: /dev/sda10
ID-2: /home raw size: 1.45 TiB size: 1.43 TiB (98.36%) used: 527.52 GiB (36.1%)
fs: ext4 dev: /dev/sda12
ID-3: swap-1 size: 16.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda5
Sensors: System Temperatures: cpu: 36.0 C mobo: 27.8 C
Fan Speeds (RPM): cpu: 1154 fan-1: 2284 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 284 Uptime: 1h 00m Memory: 15.51 GiB used: 2.06 GiB (13.3%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 12:52 pm
by SwampRabbit
@davemx thanks.
So I’m definitely not tracking the suspend issue as much as I could.
But one thing to try is to use the 5.10 kernel with AHS and see if it still manifests.
Not sure what is up with your KDE install, it was working before?
Which kernel is that using?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 3:51 pm
by davemx
SwampRabbit wrote: Thu Oct 28, 2021 12:52 pm
@davemx thanks.
So I’m definitely not tracking the suspend issue as much as I could.
But one thing to try is to use the 5.10 kernel with AHS and see if it still manifests.
Not sure what is up with your KDE install, it was working before?
Which kernel is that using?
Yes, I was using 5.10 on ahs-RC1 and it was fine with suspend. Obviously I don't know whether that will negatively impact on the AHS-goodness, but I'll install that and sort out grub.
I really have no idea what's happened with the KDE partition. I don't know whether it is caused by a fault in the /home/user area or the basic install. I downloaded ahs-rc3 and put it on a usb stick whilst running the MX21-KDE. It was working nicely until after I installed ahs-RC3, then when I tried to boot back into KDE I couldn't get to a desktop. I will re-install MX21-KDE this weekend to check whether it's a fault with /home/user. I can press CTRL-ALT-F3 to get to a text login, login as root, and get into a root desktop there. I've also been able to get into SDDM via that root, but when I try to log in as a user it doesn't, it just throws me back to SDDM.
Further on the suspend issue...
When I get the distorted screen following suspend, I've tried pressing CTRL-ALT-F3, log in as root, and run pm-hibernate. Obviously it returns to that same screen when I restart the computer, but now the screen is working OK and I can get back into my desktop by pressing CTRL-ALT-F7. So it's clearly just a graphics issue, all the stuff that should have been saved on Suspend is still there.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 4:05 pm
by dolphin_oracle
davemx wrote: Thu Oct 28, 2021 3:51 pm
SwampRabbit wrote: Thu Oct 28, 2021 12:52 pm
@davemx thanks.
So I’m definitely not tracking the suspend issue as much as I could.
But one thing to try is to use the 5.10 kernel with AHS and see if it still manifests.
Not sure what is up with your KDE install, it was working before?
Which kernel is that using?
Yes, I was using 5.10 on ahs-RC1 and it was fine with suspend. Obviously I don't know whether that will negatively impact on the AHS-goodness, but I'll install that and sort out grub.
I really have no idea what's happened with the KDE partition. I don't know whether it is caused by a fault in the /home/user area or the basic install. I downloaded ahs-rc3 and put it on a usb stick whilst running the MX21-KDE. It was working nicely until after I installed ahs-RC3, then when I tried to boot back into KDE I couldn't get to a desktop. I will re-install MX21-KDE this weekend to check whether it's a fault with /home/user. I can press CTRL-ALT-F3 to get to a text login, login as root, and get into a root desktop there. I've also been able to get into SDDM via that root, but when I try to log in as a user it doesn't, it just throws me back to SDDM.
Further on the suspend issue...
When I get the distorted screen following suspend, I've tried pressing CTRL-ALT-F3, log in as root, and run pm-hibernate. Obviously it returns to that same screen when I restart the computer, but now the screen is working OK and I can get back into my desktop by pressing CTRL-ALT-F7. So it's clearly just a graphics issue, all the stuff that should have been saved on Suspend is still there.
we have one report that intel graphics users may have some success switching to the "intel" xorg driver rather than using the default modesetting driver. there is an option in mx-tweak for that. we also have at least one report that it doesn't help, so YMMV.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 4:20 pm
by SwampRabbit
I thought Kanu Lake was ok with modesetting for awhile now, Stevo has/had a Kaby Lake laptop, but who knows if a new bug was introduced which happens sometimes in this area.
There is some movement upstream, but I haven’t had time to dig into change logs and reports.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 4:32 pm
by davemx
dolphin_oracle wrote: Thu Oct 28, 2021 4:05 pm
we have one report that intel graphics users may have some success switching to the "intel" xorg driver rather than using the default modesetting driver. there is an option in mx-tweak for that. we also have at least one report that it doesn't help, so YMMV.
I did try that with RC1 but it made no difference.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 5:38 pm
by spsf64
SwampRabbit wrote: Wed Oct 27, 2021 10:06 pm
@spsf64 is this samba issue localized to MX-21 AHS?
I don’t recall anyone mentioning this for standard MX-21.
I don’t believe that Warpinator (even though I package it for MX) is proper to be included in AHS. AHS is meant to be on par with standard MX-21 Xfce EXCEPT ONLY for the hardware and graphical packages. Also, Warpinator is not cross platform, it is limited to Linux and an unofficial Android app. Samba/SMB is a much more wide spread standard and provides much more interoperability.
I’m not understanding the LibreOffice template thing, can you expand on it more in a separate thread? If it’s some MX default you’re recommending, it should not be specific to AHS either, again not the point of AHS.
Hi
@SwampRabbit , thanks for replying
I just tested the samba thing with Std MX21 and have same results, however as I said, it is in live Mode, not installed, but it used to work fine with 19.4 with old samba-system-config (not sure of the name); did you try to create new files the way I mentioned? I agree about warpinator, not on par with samba...
About the "Templates" I will try to open a new thread by the weekend, don´t have too much time now.
If you throw a "blank" .ods, odt, etc... file into "templates" folder, it will be displayed in the "create new document" menu; I will leave a photo so you can see what I mean...
Thanks again!
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Oct 28, 2021 8:07 pm
by SwampRabbit
I see what you mean about the templates, I think I understand. Should be pretty easy to do, but probably won’t show up unless you update prior to installing as those defaults would be created at install so an update to MX defaults wouldn’t be on the original ISO since it would be added after the fact. If that makes sense.
What are the permissions on the public folder and that sub folder? Are they set recursively?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 8:14 am
by Paul..
Fresh install to metal...testing against War Thunder game (good for stressing graphics)...tried two different kernels.
EDIT: This game runs fine on stock MX-21 with
- Kernel: 5.10.0-9-amd64 x86_64
- Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.10.0-9-amd64 LLVM 11.0.1)
v: 4.6 Mesa 20.3.5 direct render: Yes
So it looks like there may be a problem with Mesa...
First Test
- Kernel: 5.14.0-3mx-amd64 x86_64
- Graphics: renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1) v: 4.6
Mesa 21.2.3 direct render: Yes
Resulted in consistent and immediate crash of War Thunder..."vulkan error waiting for GPU - timeout"
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 2606 date: 08/13/2020
CPU: Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen
family: 17 (23) model-id: 71 (113) stepping: N/A microcode: 8701021
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 114980
Speed: 2195 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2196
2: 2196 3: 2191 4: 2202 5: 1862 6: 1863 7: 2785 8: 2196 9: 2195 10: 2196 11: 2200
12: 2195 13: 2670 14: 2196 15: 2195 16: 2196
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] vendor: ASUSTeK
driver: amdgpu v: kernel bus ID: 09:00.0 chip ID: 1002:731f
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa resolution: 2560x1440~144Hz
OpenGL:
renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel bus ID: 09:00.1
chip ID: 1002:ab38
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 0b:00.4 chip ID: 1022:1487
Device-3: Logitech Logitech Webcam C925e type: USB driver: snd-usb-audio,uvcvideo
bus ID: 1-2:3 chip ID: 046d:085b serial: <filter>
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel port: f000
bus ID: 03:00.0 chip ID: 8086:1539
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 975.96 GiB used: 252.52 GiB (25.9%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 4B6Q scheme: GPT
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1B6Q scheme: GPT
ID-3: /dev/sdc type: USB vendor: SanDisk model: Cruzer Blade size: 14.56 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.27 scheme: MBR
ID-4: /dev/sdd type: USB vendor: Samsung model: Flash Drive FIT size: 29.88 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1100 scheme: MBR
Partition: ID-1: / raw size: 218.97 GiB size: 214.48 GiB (97.95%) used: 7.02 GiB (3.3%) fs: ext4
dev: /dev/sda3
ID-2: swap-1 size: 16.60 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda4
Sensors: System Temperatures: cpu: 53.5 C mobo: N/A gpu: amdgpu temp: 56 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 368 Uptime: 34m Memory: 15.54 GiB used: 1.46 GiB (9.4%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
- Kernel: 5.10.0-9-amd64 x86_64
- Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.10.0-9-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Note:
Earlier version of AMD driver was loaded...but same version of Mesa...Same result with War Thunder crash "vulkan error waiting for GPU - timeout"
Code: Select all
System: Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 2606 date: 08/13/2020
CPU: Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen
family: 17 (23) model-id: 71 (113) stepping: N/A microcode: 8701021
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 114978
Speed: 2040 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 1892
2: 1984 3: 2539 4: 1868 5: 2196 6: 2194 7: 2196 8: 2196 9: 2739 10: 2007 11: 2196
12: 2196 13: 2195 14: 2194 15: 1863 16: 1929
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] vendor: ASUSTeK
driver: amdgpu v: kernel bus ID: 09:00.0 chip ID: 1002:731f
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa resolution: 2560x1440~144Hz
OpenGL:
renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.10.0-9-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel bus ID: 09:00.1
chip ID: 1002:ab38
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 0b:00.4 chip ID: 1022:1487
Device-3: Logitech Logitech Webcam C925e type: USB driver: snd-usb-audio,uvcvideo
bus ID: 1-2:3 chip ID: 046d:085b serial: <filter>
Sound Server: ALSA v: k5.10.0-9-amd64
Network: Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel port: f000
bus ID: 03:00.0 chip ID: 8086:1539
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 975.96 GiB used: 210.56 GiB (21.6%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 4B6Q scheme: GPT
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1B6Q scheme: GPT
ID-3: /dev/sdc type: USB vendor: SanDisk model: Cruzer Blade size: 14.56 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.27 scheme: MBR
ID-4: /dev/sdd type: USB vendor: Samsung model: Flash Drive FIT size: 29.88 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1100 scheme: MBR
Partition: ID-1: / raw size: 218.97 GiB size: 214.48 GiB (97.95%) used: 7.59 GiB (3.5%) fs: ext4
dev: /dev/sda3
ID-2: swap-1 size: 16.60 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda4
Sensors: System Temperatures: cpu: 51.0 C mobo: N/A gpu: amdgpu temp: 56 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 344 Uptime: 20m Memory: 15.60 GiB used: 1.14 GiB (7.3%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 9:46 am
by dr-kart
Paul.. wrote: Fri Oct 29, 2021 8:14 am
Resulted in consistent and immediate crash of War Thunder..."vulkan error waiting for GPU - timeout"
I got similar video hardware. No issues with WT at all.
Code: Select all
Graphics: Device-1: AMD Navi 23 [Radeon RX 6600/6600 XT/6600M] vendor: Gigabyte driver: amdgpu
v: kernel bus ID: 03:00.0 chip ID: 1002:73ff
Display: x11 server: X.Org 1.20.13 driver: amdgpu resolution: 1920x1080~60Hz
OpenGL: renderer: AMD DIMGREY_CAVEFISH (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Here is what I did before:
Installed both 32 and 64 bit vulkan soft:
Code: Select all
libvulkan1:i386
mesa-vulkan-drivers:i386
libvulkan1
mesa-vulkan-drivers
and here edited
/etc/environment:
Code: Select all
VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
LIBVA_DRIVER_NAME=radeonsi
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:00 am
by SwampRabbit
@Paul.. I was just about to mention adding the i386 items ...
@dr-kart where did you get this from? Did it not work until you did that?
I would have thought this would not be good seeming that the radeonsi driver would not be even close to what you would want?
Code: Select all
VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
LIBVA_DRIVER_NAME=radeonsi
I'll be messing with MX-21 AHS stuff this weekend a bit
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:08 am
by dr-kart
@SwampRabbit Sure thing.
radeonsi in /etc/environment is just to make sure hardware video acceleration would work as it should (
mpv with
hwdec=auto option)
Code: Select all
Did it not work until you did that?
WarThunder won't start without
Code: Select all
VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:11 am
by SwampRabbit
@spsf64 so looking at your suggestion about the templates, I like it, but quick question about the execution of this.
While it works to great a new document of whatever type you select and have templates for, it just creates them, it doesn't open like LibreOffice Writer, Calc, etc.
Is the expectation that LibreOffice should open the new blank document after creation?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:14 am
by SwampRabbit
dr-kart wrote: Fri Oct 29, 2021 10:08 am
@SwampRabbit Sure thing.
radeonsi in /etc/environment is just to make sure hardware video acceleration would work as it should (
mpv with
hwdec=auto option)
Wouldn't you want amdgpu instead of radeonsi though?
I guess that is what is throwing me for a loop, plus this has never been needed in the past that I am aware of, but who knows.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:25 am
by dr-kart
SwampRabbit wrote: Fri Oct 29, 2021 10:14 am
Wouldn't you want amdgpu instead of radeonsi though?
From
https://wiki.archlinux.org/title/Hardwa ... celeration
Code: Select all
Although the video driver should automatically enable hardware video acceleration support for both VA-API and VDPAU, it may be needed to configure VA-API/VDPAU manually
Vaapi is best option for AMD GPUs afaik. So:
Code: Select all
Configuring VA-API
You can override the driver for VA-API by using the LIBVA_DRIVER_NAME environment variable:
Intel graphics:
For libva-intel-driver use i965.
For intel-media-driver use iHD.
NVIDIA:
For Nouveau use nouveau.
For NVIDIA use vdpau.
AMD:
For AMDGPU driver use radeonsi.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:40 am
by dolphin_oracle
I see quite a few posts about this same issue with ubuntu and steam out on the interwebs.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 5:48 pm
by danielson
Wanting to change keyboard settings:
Hit super key "keyboard" to change layout but still must go to MX Tools "system keyboard" to add that same language desired.
Noticed same thing on stable.
Sorry if this isn't a bug, but just curious why the apparent duplicate settings?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 6:07 pm
by fehlix
danielson wrote: Fri Oct 29, 2021 5:48 pm
Wanting to change keyboard settings:
Hit super key "keyboard" to change layout but still must go to MX Tools "system keyboard" to add that same language desired.
Noticed same thing on stable.
Sorry if this isn't a bug, but just curious why the apparent duplicate settings?
It's by design. Either use session keyboard or change to "Use system defaults" under Keyboard->Layouts.
Rational: Different user might prefer different layouts.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 7:09 pm
by davemx
For me, this RC3 is running OK with the kernel downgraded to 5.10.0-9, but I will test any proposed ahs kernel to see if suspend will work without systemd on my system.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 8:14 pm
by davemx
davemx wrote: Thu Oct 28, 2021 9:06 am
Total double whammy! Not only does the RC3 produce exactly the same error on Suspend, (I should have expected that, as I had already tried the 5.14.0-3 kernel previously). Then after I finished looking at it, then tried to run my MX21-KDE partition, that wouldn't run, part way through the plymouth screen, it suddenly dropped to a text screen with the error:
[drm] <<ERROR>> failed to enable link training
I can log in as root (text) from there, and run the display manager, but all attempts to log in fail, they just come back to the DM.
OK I have worked out what caused the error above...
First to explain that I have 6 20Gb root partitions. I mount them as /mnt/Distro1 to /mnt/Distro6 (obviously with the exception that the actual root partition I have logged into is mounted at / ). Under MX19, and also with MX21 up to RC1, when I made a fresh install on one of the partitions, and the UUID changed, all that would happen is that the partition with the wrong info in /etc/fstab didn't mount, so then I would correct /etc/fstab.
From MX21 RC3 and final, this caused the error I described above. All I had to do was to run the new install, go into /mnt/DistroN/etc/fstab and correct it, and now the supposedly "broken" install boots as well. It only seems to affect MX-Linux not other distros I have installed which behave like MX19 did, and I can sort out their /etc/fstab entries when I get around to running them.
So it wasn't a bug, and it won't affect anyone who just installs a single instance of Linux on their computer. And I'll know what to do next time!
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 8:29 pm
by dolphin_oracle
davemx wrote: Fri Oct 29, 2021 8:14 pm
davemx wrote: Thu Oct 28, 2021 9:06 am
Total double whammy! Not only does the RC3 produce exactly the same error on Suspend, (I should have expected that, as I had already tried the 5.14.0-3 kernel previously). Then after I finished looking at it, then tried to run my MX21-KDE partition, that wouldn't run, part way through the plymouth screen, it suddenly dropped to a text screen with the error:
[drm] <<ERROR>> failed to enable link training
I can log in as root (text) from there, and run the display manager, but all attempts to log in fail, they just come back to the DM.
OK I have worked out what caused the error above...
First to explain that I have 6 20Gb root partitions. I mount them as /mnt/Distro1 to /mnt/Distro6 (obviously with the exception that the actual root partition I have logged into is mounted at / ). Under MX19, and also with MX21 up to RC1, when I made a fresh install on one of the partitions, and the UUID changed, all that would happen is that the partition with the wrong info in /etc/fstab didn't mount, so then I would correct /etc/fstab.
From MX21 RC3 and final, this caused the error I described above. All I had to do was to run the new install, go into /mnt/DistroN/etc/fstab and correct it, and now the supposedly "broken" install boots as well. It only seems to affect MX-Linux not other distros I have installed which behave like MX19 did, and I can sort out their /etc/fstab entries when I get around to running them.
So it wasn't a bug, and it won't affect anyone who just installs a single instance of Linux on their computer. And I'll know what to do next time!
a systemd distro may not need the fstab entry.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:25 pm
by danielson
@fehlix - can dig that.
For the record, even if my DELL is unable to handle AHS to the fullest, did work quite well for me today.
One problem though.
Even if system was set to sleep mode instead of hibernate (power button), it could never wake up after "sleeping" for a while (fuzzy screen).
Had to shutdown and reboot (tried this procedure twice).
Someone else have this issue?
Have gone back to MX21 XFCE (non AHS) which is super (strong words for a KDE fan)!
Just love the way MX-combort-dark mode blends in so well with Firefox, LibreOffice etc. on XFCE.
- - - - -
Code: Select all
System: Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Dell product: Latitude E5430 non-vPro v: 01 serial: <filter>
Chassis: type: 9 serial: <filter>
Mobo: Dell model: 0MYF02 v: A00 serial: <filter> UEFI: Dell v: A21 date: 11/30/2018
Battery: ID-1: BAT0 charge: 1.6 Wh condition: 1.6/99.9 Wh (2%) volts: 12.6/11.1
model: SMP DELL P6YD624 type: Li-ion serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M280/320/275
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: Discharging
CPU: Topology: Dual Core model: Intel Core i5-3210M bits: 64 type: MT MCP arch: Ivy Bridge
family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L2 cache: 3072 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19933
Speed: 1504 MHz min/max: 1200/3100 MHz Core speeds (MHz): 1: 1317 2: 1386 3: 1514
4: 1404
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Dell driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:0166
Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz, 1440x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20
Device-2: Logitech Logitech USB Headset type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-3:2 chip ID: 046d:0a8f
Sound Server: ALSA v: k5.10.0-9-amd64
Network: Device-1: Broadcom and subsidiaries BCM4313 802.11bgn Wireless Network Adapter
vendor: Dell driver: wl v: kernel port: f040 bus ID: 02:00.0 chip ID: 14e4:4727
IF: wlan0 state: dormant mac: <filter>
Device-2: Broadcom and subsidiaries NetXtreme BCM5761 Gigabit Ethernet PCIe
vendor: Dell driver: tg3 v: kernel port: f040 bus ID: 0c:00.0 chip ID: 14e4:1681
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 223.57 GiB used: 12.09 GiB (5.4%)
ID-1: /dev/sda vendor: Kingston model: SA400S37240G size: 223.57 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 0102 scheme: GPT
RAID: Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0
port: f060 bus ID: 00:1f.2 chip ID: 8086.282a rev: 04
Partition: ID-1: / raw size: 54.58 GiB size: 53.42 GiB (97.88%) used: 12.04 GiB (22.5%) fs: ext4
dev: /dev/sda5
Sensors: System Temperatures: cpu: 75.0 C mobo: 47.0 C sodimm: 45.0 C
Fan Speeds (RPM): cpu: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 230 Uptime: 3h 00m Memory: 7.68 GiB used: 1.94 GiB (25.2%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Oct 29, 2021 10:28 pm
by dolphin_oracle
danielson wrote: Fri Oct 29, 2021 10:25 pm
@fehlix - can dig that.
For the record, even if my DELL is unable to handle AHS to the fullest, did work quite well for me today.
One problem though.
Even if system was set to sleep mode instead of hibernate (power button), it could never wake up after "sleeping" for a while (fuzzy screen).
Had to shutdown and reboot (tried this procedure twice).
Someone else have this issue?
Have gone back to MX21 XFCE (non AHS) which is super (strong words for a KDE fan)!
Just love the way MX-combort-dark mode blends in so well with Firefox, LibreOffice etc. on XFCE.
- - - - -
Code: Select all
System: Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Dell product: Latitude E5430 non-vPro v: 01 serial: <filter>
Chassis: type: 9 serial: <filter>
Mobo: Dell model: 0MYF02 v: A00 serial: <filter> UEFI: Dell v: A21 date: 11/30/2018
Battery: ID-1: BAT0 charge: 1.6 Wh condition: 1.6/99.9 Wh (2%) volts: 12.6/11.1
model: SMP DELL P6YD624 type: Li-ion serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M280/320/275
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: Discharging
CPU: Topology: Dual Core model: Intel Core i5-3210M bits: 64 type: MT MCP arch: Ivy Bridge
family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L2 cache: 3072 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19933
Speed: 1504 MHz min/max: 1200/3100 MHz Core speeds (MHz): 1: 1317 2: 1386 3: 1514
4: 1404
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Dell driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:0166
Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz, 1440x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20
Device-2: Logitech Logitech USB Headset type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 3-3:2 chip ID: 046d:0a8f
Sound Server: ALSA v: k5.10.0-9-amd64
Network: Device-1: Broadcom and subsidiaries BCM4313 802.11bgn Wireless Network Adapter
vendor: Dell driver: wl v: kernel port: f040 bus ID: 02:00.0 chip ID: 14e4:4727
IF: wlan0 state: dormant mac: <filter>
Device-2: Broadcom and subsidiaries NetXtreme BCM5761 Gigabit Ethernet PCIe
vendor: Dell driver: tg3 v: kernel port: f040 bus ID: 0c:00.0 chip ID: 14e4:1681
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 223.57 GiB used: 12.09 GiB (5.4%)
ID-1: /dev/sda vendor: Kingston model: SA400S37240G size: 223.57 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 0102 scheme: GPT
RAID: Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0
port: f060 bus ID: 00:1f.2 chip ID: 8086.282a rev: 04
Partition: ID-1: / raw size: 54.58 GiB size: 53.42 GiB (97.88%) used: 12.04 GiB (22.5%) fs: ext4
dev: /dev/sda5
Sensors: System Temperatures: cpu: 75.0 C mobo: 47.0 C sodimm: 45.0 C
Fan Speeds (RPM): cpu: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 230 Uptime: 3h 00m Memory: 7.68 GiB used: 1.94 GiB (25.2%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
I have an ivy bridge like yours and yes suspend is a mess on it. but my newer, less capable, intel-based netbooks suspend pretty well with the 5.14.0-3 kernel. and they all suspend well with the 5.10.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 5:46 am
by davemx
dolphin_oracle wrote: Fri Oct 29, 2021 8:29 pm
a systemd distro may not need the fstab entry.
The other Distro is not systemd, and booting into MX with systemd before I corrected fstab didn't work either. It also doesn't have a problem with suspend, but I guess that having a kernel designed to work with both init systems adds extra complication. You could have two optimised kernels though, as the choice of init systems is made at bootup via grub.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 8:35 am
by danielson
@dolphin_oracle - suspenders work better for some than others eh!
Rather than tinkering with downgrading/upgrading kernel, will stick with MX21 "normal" for now since its "suspender" works fine here.
(never cared for suspenders - don't know how men could ever wear those things).
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 8:49 am
by Paul..
dr-kart wrote: Fri Oct 29, 2021 9:46 am
Here is what I did before:
Installed both 32 and 64 bit vulkan soft:
Code: Select all
libvulkan1:i386
mesa-vulkan-drivers:i386
libvulkan1
mesa-vulkan-drivers
and here edited
/etc/environment:
Code: Select all
VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
LIBVA_DRIVER_NAME=radeonsi
@dr-kart Thanks much for your detailed answer. I tested the following:
1.
I installed the 386 vulkan stuff and added the code to /etc/environment...and it worked.
2. I'm still mystified why stock MX-21 works fine with War Thunder on
Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.10.0-9-amd64 LLVM 11.0.1)
v: 4.6 Mesa 20.3.5 direct render: Yes
But...MX-21 AHS RC3 crashes War Thunder without your workaround
Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Bottom line: Your workaround is successful...but I'm not sure how @SwampRabbit and @dolphin_oracle can put it into AHS...perhaps we should stick with Mesa 20.3.5 for a while in AHS?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 10:10 am
by dr-kart
@Paul.. Glad it was helpful.
Fresh AMD|Radeon hardware owners should definitely stick with newest Mesa drivers (v.21.2.4 stable at the moment). I don't see any reason against.
And @SwampRabbit is cooking that for us. Kudos.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 11:02 am
by dolphin_oracle
danielson wrote: Sat Oct 30, 2021 8:35 am
@dolphin_oracle - suspenders work better for some than others eh!
Rather than tinkering with downgrading/upgrading kernel, will stick with MX21 "normal" for now since its "suspender" works fine here.
(never cared for suspenders - don't know how men could ever wear those things).
LOL! when I'm old and fat I'm totally going all suspenders
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Oct 30, 2021 2:44 pm
by Paul..
dr-kart wrote: Sat Oct 30, 2021 10:10 am
@Paul.. Glad it was helpful.
Fresh AMD|Radeon hardware owners should definitely stick with newest Mesa drivers (v.21.2.4 stable at the moment). I don't see any reason against.
And @SwampRabbit is cooking that for us. Kudos.
Okay...standing by to test that!!
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sun Oct 31, 2021 10:19 pm
by talera
Hello,
I have tried out MX21 ahs XFCE RC3 after playing around with MX21 KDE.
As I am using a more recent GPU and KDE gave me some troubles at first (
https://forum.mxlinux.org/viewtopic.php?t=67098 and
https://forum.mxlinux.org/viewtopic.php?t=67125),
I was curious if I would encounter similar problems here.
In Short: I did not :)
The installation was smooth and without any problems and every piece of hardware was detected correctly. Boot, Reboot, Shutdown, MXPI... everything fine.
As I am more into gaming I tried both a linux native game via steam (Total War Warhammer 2) and a Windows Game via lutris with the use of wine & vulkan (Final Fantasy 14, DirectX 11).
Both had no issues at all and I could not determine any great differences in my performance compared to Arch.
There was no need for me to do any modification on my installation apart from installing the usual packages for gaming and the configuration of esync.
A really nice experience, thank you for that!
This leads me to a question however: Do you by chance intend to make a KDE AHS version (not just ahs enabled) just like this XFCE one for KDE-lovers with a newer GPU?
Just curious :)
Thanks!
---------------
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Gigabyte product: X570 AORUS ULTRA v: -CF serial: <filter>
Mobo: Gigabyte model: X570 AORUS ULTRA v: x.x serial: <filter>
UEFI: American Megatrends LLC. v: F34 date: 07/08/2021
CPU: Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen
family: 17 (23) model-id: 71 (113) stepping: N/A microcode: 8701021
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 114984
Speed: 2196 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2196
2: 2195 3: 2196 4: 2190 5: 1863 6: 2126 7: 2198 8: 2196 9: 2195 10: 2195 11: 2196
12: 2195 13: 2196 14: 2195 15: 2194 16: 2196
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT / 6800M] vendor: XFX Limited
driver: amdgpu v: kernel bus ID: 0d:00.0 chip ID: 1002:73df
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,radeon,vesa resolution: 2560x1440~144Hz
OpenGL: renderer: AMD Radeon RX 6700 XT (NAVY_FLOUNDER DRM 3.42.0 5.14.0-3mx-amd64
LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]
driver: snd_hda_intel v: kernel bus ID: 0d:00.1 chip ID: 1002:ab28
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte driver: snd_hda_intel
v: kernel bus ID: 0f:00.4 chip ID: 1022:1487
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus ID: 06:00.0
chip ID: 8086:2723
IF: wlan0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel
port: f000 bus ID: 07:00.0 chip ID: 8086:1539
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 2.56 TiB used: 468.63 GiB (17.9%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 2B2QEXM7 scheme: GPT
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 500GB size: 465.76 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 2B2QEXM7 scheme: GPT
ID-3: /dev/nvme2n1 vendor: Samsung model: SSD 970 EVO Plus 500GB size: 465.76 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 2B2QEXM7 scheme: GPT
ID-4: /dev/sda vendor: Crucial model: CT1000MX500SSD1 size: 931.51 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 032 scheme: GPT
ID-5: /dev/sdb vendor: Crucial model: CT250MX500SSD1 size: 232.89 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 043 scheme: GPT
ID-6: /dev/sdc type: USB vendor: SanDisk model: Extreme size: 59.63 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 0001 scheme: MBR
Partition: ID-1: / raw size: 100.00 GiB size: 97.87 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
dev: /dev/sda3
ID-2: /home raw size: 100.00 GiB size: 97.87 GiB (97.87%) used: 4.32 GiB (4.4%)
fs: ext4 dev: /dev/sda4
Sensors: System Temperatures: cpu: 52.4 C mobo: N/A gpu: amdgpu temp: 56 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye ahs
Info: Processes: 391 Uptime: 1h 58m Memory: 31.30 GiB used: 1.92 GiB (6.1%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sun Oct 31, 2021 10:45 pm
by SwampRabbit
talera wrote: Sun Oct 31, 2021 10:19 pm
...
This leads me to a question however: Do you by chance intend to make a KDE AHS version (not just ahs enabled) just like this XFCE one for KDE-lovers with a newer GPU?
Just curious :)
Thanks!
Thank you for the feedback, I had the feeling MX AHS would cause less problems. Remember with you're particular system, it needs a kernel higher than 5.10, which is the stable kernel we are tracking based off of Debian.
That is the only back-end difference between MX-KDE (5.10) and MX AHS (5.14).
As MX-KDE needs to meet the normal MX requirement of long term stability for the majority of users, I don't know if the next release of MX-KDE (21.1) will have the 5.14 kernel from AHS or not, but right now I think it needs more time to mature. Heck we could be at kernel 5.15 by then.
I do not believe there is any intent on releasing another version of MX-KDE just to include kernel 5.14, that's a lot of work, but
@Adrian is the man for MX-KDE stuffs, I just handling the packaging and initial major testing for AHS.
It isn't hard for someone to add the 5.14 kernel or other kernels to MX-KDE, its a lot easier than trying to deal with the majority of MX-KDE users having issues because we use a more bleeding edge kernel. This should only affect users who have hardware that came out after around March of this year (like your GPU), in the grand scheme of things... especially with GPU and hardware prices in general, the number of users who use MX-KDE and HAVE to updated to kernel 5.14 are very small.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 5:15 am
by Alex
No Boot Device Found *updated* *solved & please ignore*
[spoiler]I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".
As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.
Currently I am downloading the Xfce Version without ahs and will try that.
My System Information
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP ProBook 455 G4 v: N/A serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: HP model: 823E v: KBC Version 37.28 serial: <filter> UEFI: HP v: P84 Ver. 01.01
date: 08/18/2016
Battery: ID-1: BAT0 charge: 26.5 Wh condition: 34.7/34.7 Wh (100%) volts: 11.4/11.4
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Discharging
CPU: Topology: Dual Core model: AMD A6-9210 RADEON R4 5 COMPUTE CORES 2C+3G bits: 64
type: MCP arch: Excavator family: 15 (21) model-id: 70 (112) stepping: N/A
microcode: 6006704 L2 cache: 1024 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 9581
Speed: 1296 MHz min/max: 1300/2400 MHz boost: enabled Core speeds (MHz): 1: 1297
2: 1297
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics] vendor: Hewlett-Packard
driver: amdgpu v: kernel bus ID: 00:01.0 chip ID: 1002:98e4
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL: renderer: AMD STONEY (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.5 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:01.1
chip ID: 1002:15b3
Device-2: AMD Family 15h Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:09.2 chip ID: 1022:157a
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: 2000 bus ID: 02:00.0
chip ID: 8086:095a
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 140.44 GiB used: 21.3 MiB (0.0%)
ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 00RL scheme: GPT
ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Partition: ID-1: / raw size: N/A size: 2.90 GiB used: 21.3 MiB (0.7%) fs: overlay
source: ERR-102
ID-2: swap-1 size: 5.62 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda3
Sensors: System Temperatures: cpu: 56.0 C mobo: 0.0 C gpu: amdgpu temp: 56 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Info: Processes: 202 Uptime: N/A Memory: 3.70 GiB used: 787.8 MiB (20.8%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Install Log (WARNING: Couldn't determine root device\nsed -> one of the last lines)
Code: Select all
2021-11-02 03:26:53.417 DBG default: Installer version: 21.10.14
2021-11-02 03:26:53.659 DBG default: << void MInstall::startup() >>
2021-11-02 03:26:53.660 DBG default: check for remastered home demo folder: false
2021-11-02 03:26:53.660 DBG default: Exec #1: du -sb /live/aufs/boot
2021-11-02 03:26:53.746 DBG default: Exit #1: 0 QProcess::NormalExit
2021-11-02 03:26:53.746 DBG default: linuxfs file is at : "/live/boot-dev/antiX/linuxfs"
2021-11-02 03:26:53.746 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-11-02 03:26:53.760 DBG default: Exit #2: 0 QProcess::NormalExit
2021-11-02 03:26:53.761 DBG default: linuxfs compression type is "6" compression factor is 25
2021-11-02 03:26:53.761 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-11-02 03:26:53.771 DBG default: Exit #3: 0 QProcess::NormalExit
2021-11-02 03:26:53.772 DBG default: linuxfs file size is 7366246400 rootfs file size is 0
2021-11-02 03:26:53.772 DBG default: Minimum space: 268435456 (boot), 8439988224 (root)
2021-11-02 03:26:53.772 DBG default: Exec #4: uname -m | grep -q i686
2021-11-02 03:26:53.782 DBG default: Exit #4: 1 QProcess::NormalExit
2021-11-02 03:26:53.782 DBG default: uefi = true
2021-11-02 03:26:53.782 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:26:53.782 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-11-02 03:26:53.808 DBG default: SOut #5: " 6204 ? 00:00:00 udisksd\n"
2021-11-02 03:26:53.808 DBG default: Exit #5: 0 QProcess::NormalExit
2021-11-02 03:26:53.808 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:26:53.828 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:26:53.828 DBG default: Exit #6: 2 QProcess::NormalExit
2021-11-02 03:26:53.828 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-11-02 03:26:53.844 DBG default: Exit #7: 1 QProcess::NormalExit
2021-11-02 03:26:53.845 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-11-02 03:26:53.845 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:26:53.852 DBG default: Exit #8: 0 QProcess::NormalExit
2021-11-02 03:26:53.852 DBG default: Exec #9: udevadm control --reload
2021-11-02 03:26:53.893 DBG default: Exit #9: 0 QProcess::NormalExit
2021-11-02 03:26:53.893 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-11-02 03:26:53.908 DBG default: Exit #10: 0 QProcess::NormalExit
2021-11-02 03:26:53.908 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-11-02 03:26:53.921 DBG default: Exit #11: 1 QProcess::NormalExit
2021-11-02 03:26:53.921 DBG default: check for possible snapshot: false
2021-11-02 03:26:54.071 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-11-02 03:26:54.085 DBG default: Exit #12: 0 QProcess::NormalExit
2021-11-02 03:26:54.088 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-11-02 03:26:54.106 DBG default: Exit #13: 0 QProcess::NormalExit
2021-11-02 03:26:54.107 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-11-02 03:26:54.207 DBG default: Exit #14: 1 QProcess::NormalExit
2021-11-02 03:26:54.207 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-11-02 03:26:54.248 DBG default: Exit #15: 0 QProcess::NormalExit
2021-11-02 03:26:54.254 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2021-11-02 03:26:54.254 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-11-02 03:26:54.270 DBG default: Exit #16: 0 QProcess::NormalExit
2021-11-02 03:26:54.270 DBG default: Exec #17: partprobe -s
2021-11-02 03:26:55.599 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:26:55.599 DBG default: SErr #17: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:26:55.599 DBG default: Exit #17: 1 QProcess::NormalExit
2021-11-02 03:26:55.599 DBG default: Exec #18: blkid -c /dev/null
2021-11-02 03:26:55.709 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5983-8B16\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"24102219-523e-4445-bcfe-9983da03b775\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"5ec45faf-3fbd-4209-8444-616d35dd84ad\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2f508784-8ce8-4d30-968a-bb47aa5a3b27\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"7bcef7db-366f-4a28-983b-abbcd3e93554\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"24717057-588d-42d3-8d90-59150c78f5b9\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:26:55.709 DBG default: Exit #18: 0 QProcess::NormalExit
2021-11-02 03:26:55.709 DBG default: Exec #19: parted -lm
2021-11-02 03:26:55.940 DBG default: Exit #19: 0 QProcess::NormalExit
2021-11-02 03:26:55.941 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-11-02 03:26:55.962 DBG default: Exit #20: 32 QProcess::NormalExit
2021-11-02 03:27:00.531 DBG default: Exec #21: command -v system-keyboard-qt >/dev/null 2>&1
2021-11-02 03:27:00.571 DBG default: Exit #21: 0 QProcess::NormalExit
2021-11-02 03:27:00.571 DBG default: Exec #22: system-keyboard-qt
2021-11-02 03:27:20.854 DBG default: SErr #22: "\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.638: Unable to locate theme engine in module_path: \"clearlooks\",\n\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.639: Unable to locate theme engine in module_path: \"clearlooks\",\n\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"us\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\nqt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 912, resource id: 18879146, major code: 40 (TranslateCoords), minor code: 0\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"pc105\\\"\\nXKBLAYOUT=\\\"de\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2021-11-02 03:27:20.854 DBG default: Exit #22: 0 QProcess::NormalExit
2021-11-02 03:27:41.221 DBG default: Mount points:
2021-11-02 03:27:41.221 DBG default: - "/" - "sda2" "sda2" "/dev/sda2"
2021-11-02 03:27:41.221 DBG default: - "SWAP" - "sda3" "sda3" "/dev/sda3"
2021-11-02 03:27:41.241 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1260, resource id: 18881660, major code: 40 (TranslateCoords), minor code: 0
2021-11-02 03:27:41.314 DBG default: ++ Preparing to install MX Linux ++
2021-11-02 03:27:41.319 DBG default: Exec #23: smartctl -H /dev/sda
2021-11-02 03:27:41.864 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-11-02 03:27:41.864 DBG default: Exit #23: 0 QProcess::NormalExit
2021-11-02 03:27:41.864 DBG default: Exec #24: smartctl -A /dev/sda| grep -E "^ 5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-11-02 03:27:41.912 DBG default: Exit #24: 0 QProcess::NormalExit
2021-11-02 03:27:41.913 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 03:27:41.913 DBG default: Exec #25: /bin/umount -l /mnt/antiX/boot/efi
2021-11-02 03:27:41.924 DBG default: SErr #25: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-11-02 03:27:41.924 DBG default: Exit #25: 32 QProcess::NormalExit
2021-11-02 03:27:41.924 DBG default: Exec #26: /bin/umount -l /mnt/antiX/proc
2021-11-02 03:27:41.934 DBG default: SErr #26: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-11-02 03:27:41.934 DBG default: Exit #26: 32 QProcess::NormalExit
2021-11-02 03:27:41.934 DBG default: Exec #27: /bin/umount -l /mnt/antiX/sys
2021-11-02 03:27:41.945 DBG default: SErr #27: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-11-02 03:27:41.945 DBG default: Exit #27: 32 QProcess::NormalExit
2021-11-02 03:27:41.945 DBG default: Exec #28: /bin/umount -l /mnt/antiX/dev/shm
2021-11-02 03:27:41.955 DBG default: SErr #28: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-11-02 03:27:41.955 DBG default: Exit #28: 32 QProcess::NormalExit
2021-11-02 03:27:41.955 DBG default: Exec #29: /bin/umount -l /mnt/antiX/dev
2021-11-02 03:27:41.964 DBG default: SErr #29: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-11-02 03:27:41.964 DBG default: Exit #29: 32 QProcess::NormalExit
2021-11-02 03:27:41.964 DBG default: Exec #30: swapoff /dev/sda2
2021-11-02 03:27:41.977 DBG default: SErr #30: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:41.977 DBG default: Exit #30: 4 QProcess::NormalExit
2021-11-02 03:27:41.977 DBG default: Exec #31: /bin/umount -l /mnt/antiX/
2021-11-02 03:27:41.987 DBG default: SErr #31: "umount: /mnt/antiX/: no mount point specified.\n"
2021-11-02 03:27:41.988 DBG default: Exit #31: 32 QProcess::NormalExit
2021-11-02 03:27:41.988 DBG default: << bool PartMan::preparePartitions() >>
2021-11-02 03:27:41.988 DBG default: Exec #32: lsblk -nro name /dev/sda
2021-11-02 03:27:42.001 DBG default: Exit #32: 0 QProcess::NormalExit
2021-11-02 03:27:42.001 DBG default: Exec #33: swapoff /dev/sda
2021-11-02 03:27:42.011 DBG default: SErr #33: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.011 DBG default: Exit #33: 4 QProcess::NormalExit
2021-11-02 03:27:42.011 DBG default: Exec #34: /bin/umount /dev/sda
2021-11-02 03:27:42.023 DBG default: SErr #34: "umount: /dev/sda: not mounted.\n"
2021-11-02 03:27:42.023 DBG default: Exit #34: 32 QProcess::NormalExit
2021-11-02 03:27:42.023 DBG default: Exec #35: swapoff /dev/sda2
2021-11-02 03:27:42.036 DBG default: SErr #35: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.036 DBG default: Exit #35: 4 QProcess::NormalExit
2021-11-02 03:27:42.036 DBG default: Exec #36: /bin/umount /dev/sda2
2021-11-02 03:27:42.051 DBG default: SErr #36: "umount: /dev/sda2: not mounted.\n"
2021-11-02 03:27:42.051 DBG default: Exit #36: 32 QProcess::NormalExit
2021-11-02 03:27:42.051 DBG default: Exec #37: swapoff /dev/sda3
2021-11-02 03:27:42.067 DBG default: Exit #37: 0 QProcess::NormalExit
2021-11-02 03:27:42.068 DBG default: Exec #38: /bin/umount /dev/sda3
2021-11-02 03:27:42.081 DBG default: SErr #38: "umount: /dev/sda3: not mounted.\n"
2021-11-02 03:27:42.081 DBG default: Exit #38: 32 QProcess::NormalExit
2021-11-02 03:27:42.081 DBG default: Exec #39: swapoff /dev/sda1
2021-11-02 03:27:42.092 DBG default: SErr #39: "swapoff: /dev/sda1: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.092 DBG default: Exit #39: 4 QProcess::NormalExit
2021-11-02 03:27:42.092 DBG default: Exec #40: /bin/umount /dev/sda1
2021-11-02 03:27:42.105 DBG default: SErr #40: "umount: /dev/sda1: not mounted.\n"
2021-11-02 03:27:42.105 DBG default: Exit #40: 32 QProcess::NormalExit
2021-11-02 03:27:42.105 DBG default: ++ Preparing partition tables ++
2021-11-02 03:27:42.110 DBG default: Exec #41: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-11-02 03:27:42.164 DBG default: SErr #41: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.0411501 s, 102 MB/s\n"
2021-11-02 03:27:42.164 DBG default: Exit #41: 0 QProcess::NormalExit
2021-11-02 03:27:42.164 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=1831617
2021-11-02 03:27:42.220 DBG default: SErr #42: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4128768 bytes (4.1 MB, 3.9 MiB) copied, 0.0359852 s, 115 MB/s\n"
2021-11-02 03:27:42.220 DBG default: Exit #42: 1 QProcess::NormalExit
2021-11-02 03:27:42.220 DBG default: Exec #43: parted -s /dev/sda mklabel gpt
2021-11-02 03:27:42.281 DBG default: Exit #43: 0 QProcess::NormalExit
2021-11-02 03:27:42.281 DBG default: ++ Preparing required partitions ++
2021-11-02 03:27:42.291 DBG default: Exec #44: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-11-02 03:27:42.370 DBG default: Exit #44: 0 QProcess::NormalExit
2021-11-02 03:27:42.376 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 257MiB 108713MiB
2021-11-02 03:27:42.499 DBG default: Exit #45: 0 QProcess::NormalExit
2021-11-02 03:27:42.506 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 108713MiB 114473MiB
2021-11-02 03:27:42.679 DBG default: Exit #46: 0 QProcess::NormalExit
2021-11-02 03:27:42.733 DBG default: Exec #47: partprobe -s
2021-11-02 03:27:44.153 DBG default: SOut #47: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:44.153 DBG default: SErr #47: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:27:44.153 DBG default: Exit #47: 1 QProcess::NormalExit
2021-11-02 03:27:44.153 DBG default: << bool PartMan::formatPartitions() >>
2021-11-02 03:27:44.153 DBG default: ++ Formatting: EFI System Partition ++
2021-11-02 03:27:44.163 DBG default: Exec #48: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-11-02 03:27:44.424 DBG default: SOut #48: "mkfs.fat 4.2 (2021-01-31)\n"
2021-11-02 03:27:44.425 DBG default: SErr #48: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-11-02 03:27:44.425 DBG default: Exit #48: 0 QProcess::NormalExit
2021-11-02 03:27:44.425 DBG default: Exec #49: parted -s /dev/sda set 1 esp on
2021-11-02 03:27:44.536 DBG default: Exit #49: 0 QProcess::NormalExit
2021-11-02 03:27:44.536 DBG default: ++ Formatting: / (root) ++
2021-11-02 03:27:44.543 DBG default: Exec #50: mkfs.ext4 -F /dev/sda2 -L "rootMX21"
2021-11-02 03:27:52.005 DBG default: SOut #50: "Discarding device blocks: 4096/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 2625536/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 5246976/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b11014144/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b15208448/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b20451328/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b26742784/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone \nCreating filesystem with 27764736 4k blocks and 6946816 inodes\nFilesystem UUID: 1cff286a-8978-489b-812b-a71e2cb0a8cb\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone \nWriting inode tables: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone\n\n"
2021-11-02 03:27:52.005 DBG default: SErr #50: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-11-02 03:27:52.005 DBG default: Exit #50: 0 QProcess::NormalExit
2021-11-02 03:27:52.005 DBG default: Exec #51: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-11-02 03:27:52.032 DBG default: SOut #51: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-11-02 03:27:52.032 DBG default: Exit #51: 0 QProcess::NormalExit
2021-11-02 03:27:52.032 DBG default: ++ Formatting: swap space ++
2021-11-02 03:27:52.038 DBG default: Exec #52: /sbin/mkswap /dev/sda3 -L "swapMX"
2021-11-02 03:27:52.068 DBG default: SOut #52: "Setting up swapspace version 1, size = 5.6 GiB (6039793664 bytes)\nLABEL=swapMX, UUID=6ebaaa24-177f-41c4-a4f3-5658721154b0\n"
2021-11-02 03:27:52.069 DBG default: SErr #52: "mkswap: /dev/sda3: warning: wiping old swap signature.\n"
2021-11-02 03:27:52.069 DBG default: Exit #52: 0 QProcess::NormalExit
2021-11-02 03:27:52.069 DBG default: << bool PartMan::mountPartitions() >>
2021-11-02 03:27:52.069 DBG default: ++ Mounting: /dev/sda2 ++
2021-11-02 03:27:52.080 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2021-11-02 03:27:52.080 DBG default: Exec #53: /bin/mount /dev/sda2 /mnt/antiX/ -o noatime
2021-11-02 03:27:52.155 DBG default: Exit #53: 0 QProcess::NormalExit
2021-11-02 03:27:52.155 DBG default: Exec #54: blkid -c /dev/null
2021-11-02 03:27:52.271 DBG default: SOut #54: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"8702-DE8F\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"50d7be26-538a-4577-8a4c-2e8132f5fd90\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"1cff286a-8978-489b-812b-a71e2cb0a8cb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"b7bdfa25-92dc-44dd-b6d3-e1d726f7c375\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"6ebaaa24-177f-41c4-a4f3-5658721154b0\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"28a1deff-3786-4fc5-b389-40bdf62d05d8\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:27:52.271 DBG default: Exit #54: 0 QProcess::NormalExit
2021-11-02 03:27:52.272 DBG default: << bool MInstall::installLinux() >>
2021-11-02 03:27:52.272 DBG default: ++ Creating system directories ++
2021-11-02 03:27:52.281 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:27:52.281 DBG default: Exec #55: ps -e | grep 'udisksd'
2021-11-02 03:27:52.306 DBG default: SOut #55: " 6204 ? 00:00:00 udisksd\n"
2021-11-02 03:27:52.306 DBG default: Exit #55: 0 QProcess::NormalExit
2021-11-02 03:27:52.306 DBG default: Exec #56: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:27:52.319 DBG default: SErr #56: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:27:52.319 DBG default: Exit #56: 2 QProcess::NormalExit
2021-11-02 03:27:52.319 DBG default: Exec #57: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:27:52.330 DBG default: Exit #57: 0 QProcess::NormalExit
2021-11-02 03:27:52.330 DBG default: Exec #58: udevadm control --reload
2021-11-02 03:27:52.351 DBG default: Exit #58: 0 QProcess::NormalExit
2021-11-02 03:27:52.351 DBG default: Exec #59: partprobe -s
2021-11-02 03:27:53.678 DBG default: SOut #59: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:53.678 DBG default: SErr #59: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:27:53.678 DBG default: Exit #59: 1 QProcess::NormalExit
2021-11-02 03:27:53.685 DBG default: Sleep #1: 1000ms
2021-11-02 03:27:54.636 DBG default: Sleep #1: exit 0
2021-11-02 03:27:54.636 DBG default: << bool MInstall::copyLinux() >>
2021-11-02 03:27:54.641 DBG default: ++ Copying new system ++
2021-11-02 03:27:54.648 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2021-11-02 03:29:31.250 DBG default: Exit COPY: 0 QProcess::NormalExit
2021-11-02 03:29:31.250 DBG default: ++ Fixing configuration ++
2021-11-02 03:29:31.264 DBG default: Exec #60: /usr/sbin/live-to-installed /mnt/antiX
2021-11-02 03:29:31.441 DBG default: SErr #60: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.441 DBG default: Exit #60: 0 QProcess::NormalExit
2021-11-02 03:29:31.441 DBG default: Desktop menu
2021-11-02 03:29:31.441 DBG default: Exec #61: chroot /mnt/antiX desktop-menu --write-out-global
2021-11-02 03:29:31.460 DBG default: SErr #61: "chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.460 DBG default: Exit #61: 127 QProcess::NormalExit
2021-11-02 03:29:31.460 DBG default: Creating fstab entry for: "/" "/dev/sda2"
2021-11-02 03:29:31.460 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/sda2
2021-11-02 03:29:31.492 DBG default: Exit #62: 0 QProcess::NormalExit
2021-11-02 03:29:31.493 DBG default: Exec #63: blkid /dev/sda2 -o value -s TYPE
2021-11-02 03:29:31.507 DBG default: Exit #63: 0 QProcess::NormalExit
2021-11-02 03:29:31.507 DBG default: Creating fstab entry for: "SWAP" "/dev/sda3"
2021-11-02 03:29:31.507 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/sda3
2021-11-02 03:29:31.542 DBG default: Exit #64: 0 QProcess::NormalExit
2021-11-02 03:29:31.542 DBG default: Exec #65: blkid /dev/sda3 -o value -s TYPE
2021-11-02 03:29:31.558 DBG default: Exit #65: 0 QProcess::NormalExit
2021-11-02 03:29:31.558 DBG default: Exec #66: blkid -o value UUID -s UUID /dev/sda1
2021-11-02 03:29:31.586 DBG default: Exit #66: 0 QProcess::NormalExit
2021-11-02 03:29:31.587 DBG default: espdev "/dev/sda1" "UUID=8702-DE8F"
2021-11-02 03:29:31.587 DBG default: Exec #67: /bin/rm -rf /mnt/antiX/home/demo
2021-11-02 03:29:31.631 DBG default: Exit #67: 0 QProcess::NormalExit
2021-11-02 03:29:31.631 DBG default: Exec #68: /bin/rm -rf /mnt/antiX/media/sd*
2021-11-02 03:29:31.645 DBG default: Exit #68: 0 QProcess::NormalExit
2021-11-02 03:29:31.645 DBG default: Exec #69: /bin/rm -rf /mnt/antiX/media/hd*
2021-11-02 03:29:31.657 DBG default: Exit #69: 0 QProcess::NormalExit
2021-11-02 03:29:31.657 DBG default: Exec #70: guess-hwclock
2021-11-02 03:29:32.985 DBG default: Exit #70: 0 QProcess::NormalExit
2021-11-02 03:29:32.985 DBG default: Exec #71: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2021-11-02 03:29:33.006 DBG default: Exit #71: 0 QProcess::NormalExit
2021-11-02 03:29:33.006 DBG default: Exec #72: chroot /mnt/antiX rm /var/lib/dbus/machine-id /etc/machine-id
2021-11-02 03:29:33.053 DBG default: Exit #72: 0 QProcess::NormalExit
2021-11-02 03:29:33.053 DBG default: Exec #73: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2021-11-02 03:29:33.105 DBG default: Exit #73: 0 QProcess::NormalExit
2021-11-02 03:29:33.106 DBG default: Exec #74: chroot /mnt/antiX dbus-uuidgen --ensure
2021-11-02 03:29:33.132 DBG default: Exit #74: 0 QProcess::NormalExit
2021-11-02 03:29:33.132 DBG default: Exec #75: /bin/umount -R /mnt/antiX/dev
2021-11-02 03:29:33.155 DBG default: Exit #75: 0 QProcess::NormalExit
2021-11-02 03:29:33.155 DBG default: ++ Paused for required operator input ++
2021-11-02 03:29:33.211 DBG default: ++ Setting system configuration ++
2021-11-02 03:29:33.221 DBG default: Exec #76: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2021-11-02 03:29:33.275 DBG default: Exit #76: 1 QProcess::NormalExit
2021-11-02 03:29:33.275 DBG default: Exec #77: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.296 DBG default: Exit #77: 1 QProcess::NormalExit
2021-11-02 03:29:33.296 DBG default: Exec #78: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.311 DBG default: Exit #78: 1 QProcess::NormalExit
2021-11-02 03:29:33.311 DBG default: Exec #79: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.327 DBG default: Exit #79: 1 QProcess::NormalExit
2021-11-02 03:29:33.327 DBG default: Exec #80: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.342 DBG default: Exit #80: 1 QProcess::NormalExit
2021-11-02 03:29:33.342 DBG default: Exec #81: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2021-11-02 03:29:33.357 DBG default: Exit #81: 1 QProcess::NormalExit
2021-11-02 03:29:33.357 DBG default: Set service: "anacron" true
2021-11-02 03:29:33.357 DBG default: Exec #82: chroot /mnt/antiX update-rc.d anacron defaults
2021-11-02 03:29:33.521 DBG default: Exit #82: 0 QProcess::NormalExit
2021-11-02 03:29:33.521 DBG default: Exec #83: chroot /mnt/antiX systemctl enable anacron
2021-11-02 03:29:33.702 DBG default: SErr #83: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2021-11-02 03:29:33.702 DBG default: Exit #83: 0 QProcess::NormalExit
2021-11-02 03:29:33.702 DBG default: Set service: "cron" true
2021-11-02 03:29:33.702 DBG default: Exec #84: chroot /mnt/antiX update-rc.d cron defaults
2021-11-02 03:29:33.783 DBG default: Exit #84: 0 QProcess::NormalExit
2021-11-02 03:29:33.784 DBG default: Exec #85: chroot /mnt/antiX systemctl enable cron
2021-11-02 03:29:33.943 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2021-11-02 03:29:33.943 DBG default: Exit #85: 0 QProcess::NormalExit
2021-11-02 03:29:33.944 DBG default: Set service: "sudo" true
2021-11-02 03:29:33.944 DBG default: Exec #86: chroot /mnt/antiX update-rc.d sudo defaults
2021-11-02 03:29:34.027 DBG default: Exit #86: 0 QProcess::NormalExit
2021-11-02 03:29:34.027 DBG default: Exec #87: chroot /mnt/antiX systemctl enable sudo
2021-11-02 03:29:34.044 DBG default: SErr #87: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:34.044 DBG default: Exit #87: 1 QProcess::NormalExit
2021-11-02 03:29:34.044 DBG default: Set service: "cpufrequtils" true
2021-11-02 03:29:34.044 DBG default: Exec #88: chroot /mnt/antiX update-rc.d cpufrequtils defaults
2021-11-02 03:29:34.125 DBG default: Exit #88: 0 QProcess::NormalExit
2021-11-02 03:29:34.125 DBG default: Exec #89: chroot /mnt/antiX systemctl enable cpufrequtils
2021-11-02 03:29:34.283 DBG default: SErr #89: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2021-11-02 03:29:34.283 DBG default: Exit #89: 0 QProcess::NormalExit
2021-11-02 03:29:34.284 DBG default: Set service: "smartmontools" true
2021-11-02 03:29:34.284 DBG default: Exec #90: chroot /mnt/antiX update-rc.d smartmontools defaults
2021-11-02 03:29:34.365 DBG default: Exit #90: 0 QProcess::NormalExit
2021-11-02 03:29:34.365 DBG default: Exec #91: chroot /mnt/antiX systemctl enable smartmontools
2021-11-02 03:29:34.524 DBG default: SErr #91: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2021-11-02 03:29:34.524 DBG default: Exit #91: 0 QProcess::NormalExit
2021-11-02 03:29:34.524 DBG default: Set service: "acpid" true
2021-11-02 03:29:34.524 DBG default: Exec #92: chroot /mnt/antiX update-rc.d acpid defaults
2021-11-02 03:29:34.613 DBG default: Exit #92: 0 QProcess::NormalExit
2021-11-02 03:29:34.613 DBG default: Exec #93: chroot /mnt/antiX systemctl enable acpid
2021-11-02 03:29:34.776 DBG default: SErr #93: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2021-11-02 03:29:34.776 DBG default: Exit #93: 0 QProcess::NormalExit
2021-11-02 03:29:34.776 DBG default: Set service: "hddtemp" true
2021-11-02 03:29:34.776 DBG default: Exec #94: chroot /mnt/antiX update-rc.d hddtemp defaults
2021-11-02 03:29:34.859 DBG default: Exit #94: 0 QProcess::NormalExit
2021-11-02 03:29:34.859 DBG default: Exec #95: chroot /mnt/antiX systemctl enable hddtemp
2021-11-02 03:29:35.014 DBG default: SErr #95: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2021-11-02 03:29:35.014 DBG default: Exit #95: 0 QProcess::NormalExit
2021-11-02 03:29:35.015 DBG default: Set service: "dbus" true
2021-11-02 03:29:35.015 DBG default: Exec #96: chroot /mnt/antiX update-rc.d dbus defaults
2021-11-02 03:29:35.097 DBG default: Exit #96: 0 QProcess::NormalExit
2021-11-02 03:29:35.097 DBG default: Exec #97: chroot /mnt/antiX systemctl enable dbus
2021-11-02 03:29:35.257 DBG default: SErr #97: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n instance name specified.\n"
2021-11-02 03:29:35.257 DBG default: Exit #97: 0 QProcess::NormalExit
2021-11-02 03:29:35.257 DBG default: Set service: "saned" true
2021-11-02 03:29:35.257 DBG default: Exec #98: chroot /mnt/antiX update-rc.d saned defaults
2021-11-02 03:29:35.350 DBG default: Exit #98: 0 QProcess::NormalExit
2021-11-02 03:29:35.350 DBG default: Exec #99: chroot /mnt/antiX systemctl enable saned
2021-11-02 03:29:35.369 DBG default: SErr #99: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:35.369 DBG default: Exit #99: 1 QProcess::NormalExit
2021-11-02 03:29:35.369 DBG default: Set service: "haveged" true
2021-11-02 03:29:35.369 DBG default: Exec #100: chroot /mnt/antiX update-rc.d haveged defaults
2021-11-02 03:29:35.447 DBG default: Exit #100: 0 QProcess::NormalExit
2021-11-02 03:29:35.447 DBG default: Exec #101: chroot /mnt/antiX systemctl enable haveged
2021-11-02 03:29:35.607 DBG default: SErr #101: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2021-11-02 03:29:35.607 DBG default: Exit #101: 0 QProcess::NormalExit
2021-11-02 03:29:35.607 DBG default: Set service: "bluetooth" true
2021-11-02 03:29:35.607 DBG default: Exec #102: chroot /mnt/antiX update-rc.d bluetooth defaults
2021-11-02 03:29:35.688 DBG default: Exit #102: 0 QProcess::NormalExit
2021-11-02 03:29:35.688 DBG default: Exec #103: chroot /mnt/antiX systemctl enable bluetooth
2021-11-02 03:29:35.849 DBG default: SErr #103: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2021-11-02 03:29:35.849 DBG default: Exit #103: 0 QProcess::NormalExit
2021-11-02 03:29:35.849 DBG default: Set service: "rsync" true
2021-11-02 03:29:35.849 DBG default: Exec #104: chroot /mnt/antiX update-rc.d rsync defaults
2021-11-02 03:29:35.931 DBG default: Exit #104: 0 QProcess::NormalExit
2021-11-02 03:29:35.931 DBG default: Exec #105: chroot /mnt/antiX systemctl enable rsync
2021-11-02 03:29:36.089 DBG default: SErr #105: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2021-11-02 03:29:36.089 DBG default: Exit #105: 0 QProcess::NormalExit
2021-11-02 03:29:36.089 DBG default: Set service: "cups" true
2021-11-02 03:29:36.089 DBG default: Exec #106: chroot /mnt/antiX update-rc.d cups defaults
2021-11-02 03:29:36.173 DBG default: Exit #106: 0 QProcess::NormalExit
2021-11-02 03:29:36.173 DBG default: Exec #107: chroot /mnt/antiX systemctl enable cups
2021-11-02 03:29:36.330 DBG default: SErr #107: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2021-11-02 03:29:36.331 DBG default: Exit #107: 0 QProcess::NormalExit
2021-11-02 03:29:36.331 DBG default: Exec #108: sed -i 's/WORKGROUP/Workgroup/g' /mnt/antiX/etc/samba/smb.conf
2021-11-02 03:29:36.349 DBG default: Exit #108: 0 QProcess::NormalExit
2021-11-02 03:29:36.350 DBG default: Set service: "smbd" true
2021-11-02 03:29:36.350 DBG default: Exec #109: chroot /mnt/antiX update-rc.d smbd defaults
2021-11-02 03:29:36.431 DBG default: Exit #109: 0 QProcess::NormalExit
2021-11-02 03:29:36.431 DBG default: Exec #110: chroot /mnt/antiX systemctl enable smbd
2021-11-02 03:29:36.596 DBG default: SErr #110: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2021-11-02 03:29:36.596 DBG default: Exit #110: 0 QProcess::NormalExit
2021-11-02 03:29:36.596 DBG default: Set service: "nmbd" true
2021-11-02 03:29:36.596 DBG default: Exec #111: chroot /mnt/antiX update-rc.d nmbd defaults
2021-11-02 03:29:36.696 DBG default: Exit #111: 0 QProcess::NormalExit
2021-11-02 03:29:36.696 DBG default: Exec #112: chroot /mnt/antiX systemctl enable nmbd
2021-11-02 03:29:36.858 DBG default: SErr #112: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2021-11-02 03:29:36.859 DBG default: Exit #112: 0 QProcess::NormalExit
2021-11-02 03:29:36.859 DBG default: Set service: "samba-ad-dc" true
2021-11-02 03:29:36.859 DBG default: Exec #113: chroot /mnt/antiX update-rc.d samba-ad-dc defaults
2021-11-02 03:29:36.948 DBG default: Exit #113: 0 QProcess::NormalExit
2021-11-02 03:29:36.948 DBG default: Exec #114: chroot /mnt/antiX systemctl enable samba-ad-dc
2021-11-02 03:29:36.966 DBG default: SErr #114: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:36.966 DBG default: Exit #114: 1 QProcess::NormalExit
2021-11-02 03:29:36.966 DBG default: Exec #115: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Alex-ProBook/' /mnt/antiX/etc/hosts
2021-11-02 03:29:37.016 DBG default: Exit #115: 0 QProcess::NormalExit
2021-11-02 03:29:37.017 DBG default: Exec #116: echo "Alex-ProBook" | cat > /mnt/antiX/etc/hostname
2021-11-02 03:29:37.034 DBG default: Exit #116: 0 QProcess::NormalExit
2021-11-02 03:29:37.034 DBG default: Exec #117: echo "Alex-ProBook" | cat > /mnt/antiX/etc/mailname
2021-11-02 03:29:37.049 DBG default: Exit #117: 0 QProcess::NormalExit
2021-11-02 03:29:37.049 DBG default: Exec #118: sed -i 's/.*send host-name.*/send host-name "Alex-ProBook";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2021-11-02 03:29:37.066 DBG default: Exit #118: 0 QProcess::NormalExit
2021-11-02 03:29:37.066 DBG default: Exec #119: echo "Alex-ProBook" | cat > /mnt/antiX/etc/defaultdomain
2021-11-02 03:29:37.083 DBG default: Exit #119: 0 QProcess::NormalExit
2021-11-02 03:29:37.083 DBG default: << void MInstall::setLocale() >>
2021-11-02 03:29:37.083 DBG default: Update locale
2021-11-02 03:29:37.083 DBG default: Exec #120: chroot /mnt/antiX /usr/sbin/update-locale "LANG=de_DE.UTF-8"
2021-11-02 03:29:37.139 DBG default: Exit #120: 0 QProcess::NormalExit
2021-11-02 03:29:37.139 DBG default: Exec #121: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2021-11-02 03:29:37.162 DBG default: Exit #121: 0 QProcess::NormalExit
2021-11-02 03:29:37.162 DBG default: Exec #122: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2021-11-02 08:29:37.180 DBG default: Exit #122: 0 QProcess::NormalExit
2021-11-02 08:29:37.180 DBG default: Exec #123: echo Europe/Berlin > /mnt/antiX/etc/timezone
2021-11-02 08:29:37.195 DBG default: Exit #123: 0 QProcess::NormalExit
2021-11-02 08:29:37.195 DBG default: Exec #124: echo Europe/Berlin > /etc/timezone
2021-11-02 08:29:37.212 DBG default: Exit #124: 0 QProcess::NormalExit
2021-11-02 08:29:37.212 DBG default: Exec #125: echo '0.0 0 0.0
0
UTC' > /etc/adjtime
2021-11-02 08:29:37.227 DBG default: Exit #125: 0 QProcess::NormalExit
2021-11-02 08:29:37.227 DBG default: Exec #126: hwclock --hctosys
2021-11-02 08:29:38.000 DBG default: Exit #126: 0 QProcess::NormalExit
2021-11-02 08:29:38.001 DBG default: Exec #127: /bin/cp -f /etc/adjtime /mnt/antiX/etc/
2021-11-02 08:29:38.019 DBG default: Exit #127: 0 QProcess::NormalExit
2021-11-02 08:29:38.019 DBG default: Exec #128: /bin/cp -f /etc/default/rcS /mnt/antiX/etc/default
2021-11-02 08:29:38.038 DBG default: Exit #128: 0 QProcess::NormalExit
2021-11-02 08:29:38.038 DBG default: Exec #129: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.055 DBG default: SErr #129: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.055 DBG default: Exit #129: 2 QProcess::NormalExit
2021-11-02 08:29:38.055 DBG default: Exec #130: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.071 DBG default: SErr #130: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.071 DBG default: Exit #130: 2 QProcess::NormalExit
2021-11-02 08:29:38.072 DBG default: Exec #131: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.089 DBG default: Exit #131: 0 QProcess::NormalExit
2021-11-02 08:29:38.089 DBG default: Exec #132: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.125 DBG default: Exit #132: 0 QProcess::NormalExit
2021-11-02 08:29:38.125 DBG default: Exec #133: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.145 DBG default: SErr #133: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.145 DBG default: Exit #133: 2 QProcess::NormalExit
2021-11-02 08:29:38.145 DBG default: Exec #134: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.162 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.163 DBG default: Exit #134: 2 QProcess::NormalExit
2021-11-02 08:29:38.163 DBG default: Exec #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2021-11-02 08:29:38.180 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2021-11-02 08:29:38.180 DBG default: Exit #135: 2 QProcess::NormalExit
2021-11-02 08:29:38.180 DBG default: Exec #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2021-11-02 08:29:38.197 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2021-11-02 08:29:38.197 DBG default: Exit #136: 2 QProcess::NormalExit
2021-11-02 08:29:38.197 DBG default: Exec #137: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2021-11-02 08:29:38.223 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2021-11-02 08:29:38.223 DBG default: Exit #137: 2 QProcess::NormalExit
2021-11-02 08:29:38.223 DBG default: Localize repo
2021-11-02 08:29:38.223 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2021-11-02 08:29:38.329 DBG default: SOut #138: "File: mx.list\n"
2021-11-02 08:29:38.329 DBG default: Exit #138: 0 QProcess::NormalExit
2021-11-02 08:29:38.329 DBG default: Exec #139: chroot /mnt/antiX chpasswd
2021-11-02 08:29:38.477 DBG default: Exit #139: 0 QProcess::NormalExit
2021-11-02 08:29:38.477 DBG default: Exec #140: /bin/cp -a /mnt/antiX/etc/skel /mnt/antiX/home/Alex
2021-11-02 08:29:39.111 DBG default: Exit #140: 0 QProcess::NormalExit
2021-11-02 08:29:39.111 DBG default: Exec #141: chown -R demo:demo /mnt/antiX/home/Alex
2021-11-02 08:29:39.139 DBG default: Exit #141: 0 QProcess::NormalExit
2021-11-02 08:29:39.139 DBG default: Exec #142: sed -i 's/demo/Alex/g' /mnt/antiX/etc/group
2021-11-02 08:29:39.159 DBG default: Exit #142: 0 QProcess::NormalExit
2021-11-02 08:29:39.159 DBG default: Exec #143: sed -i 's/demo/Alex/g' /mnt/antiX/etc/gshadow
2021-11-02 08:29:39.179 DBG default: Exit #143: 0 QProcess::NormalExit
2021-11-02 08:29:39.179 DBG default: Exec #144: sed -i 's/demo/Alex/g' /mnt/antiX/etc/passwd
2021-11-02 08:29:39.198 DBG default: Exit #144: 0 QProcess::NormalExit
2021-11-02 08:29:39.198 DBG default: Exec #145: sed -i 's/demo/Alex/g' /mnt/antiX/etc/shadow
2021-11-02 08:29:39.217 DBG default: Exit #145: 0 QProcess::NormalExit
2021-11-02 08:29:39.218 DBG default: Exec #146: sed -i 's/demo/Alex/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.236 DBG default: SErr #146: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.236 DBG default: Exit #146: 2 QProcess::NormalExit
2021-11-02 08:29:39.236 DBG default: Exec #147: sed -i 's/demo/Alex/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.255 DBG default: Exit #147: 0 QProcess::NormalExit
2021-11-02 08:29:39.255 DBG default: Exec #148: sed -i 's/demo/Alex/g' /mnt/antiX/home/*/.gtkrc-2.0
2021-11-02 08:29:39.273 DBG default: SErr #148: "sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.273 DBG default: Exit #148: 2 QProcess::NormalExit
2021-11-02 08:29:39.273 DBG default: Exec #149: sed -i 's/demo/Alex/g' /mnt/antiX/root/.gtkrc-2.0
2021-11-02 08:29:39.291 DBG default: SErr #149: "sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.291 DBG default: Exit #149: 2 QProcess::NormalExit
2021-11-02 08:29:39.291 DBG default: Exec #150: sed -i 's/auto_login/#auto_login/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.308 DBG default: SErr #150: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.308 DBG default: Exit #150: 2 QProcess::NormalExit
2021-11-02 08:29:39.308 DBG default: Exec #151: sed -i 's/default_user /#default_user /g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.326 DBG default: SErr #151: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.327 DBG default: Exit #151: 2 QProcess::NormalExit
2021-11-02 08:29:39.327 DBG default: Exec #152: sed -i 's/autologin-user=/#autologin-user=/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.345 DBG default: Exit #152: 0 QProcess::NormalExit
2021-11-02 08:29:39.345 DBG default: Exec #153: sed -i 's/User=.*/User=/g' /mnt/antiX/etc/sddm.conf
2021-11-02 08:29:39.362 DBG default: SErr #153: "sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2021-11-02 08:29:39.362 DBG default: Exit #153: 2 QProcess::NormalExit
2021-11-02 08:29:39.362 DBG default: Exec #154: touch /mnt/antiX/var/mail/Alex
2021-11-02 08:29:39.380 DBG default: Exit #154: 0 QProcess::NormalExit
2021-11-02 08:29:39.393 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2021-11-02 08:29:39.393 DBG default: - Product: MX Linux 21
2021-11-02 08:29:39.393 DBG default: - Version: 21.10.14
2021-11-02 08:29:39.393 DBG default: = GRUB:
2021-11-02 08:29:39.393 DBG default: - Install: false
2021-11-02 08:29:39.393 DBG default: - Location: sda1
2021-11-02 08:29:39.393 DBG default: - TargetType: ESP
2021-11-02 08:29:39.393 DBG default: = Localization:
2021-11-02 08:29:39.393 DBG default: - ClockHours: 24
2021-11-02 08:29:39.393 DBG default: - LocalClock: false
2021-11-02 08:29:39.393 DBG default: - Locale: de_DE.UTF-8
2021-11-02 08:29:39.393 DBG default: - Timezone: Europe/Berlin
2021-11-02 08:29:39.394 DBG default: = Network:
2021-11-02 08:29:39.394 DBG default: - ComputerName: Alex-ProBook
2021-11-02 08:29:39.394 DBG default: - Domain: example.dom
2021-11-02 08:29:39.394 DBG default: - Samba: true
2021-11-02 08:29:39.394 DBG default: - Workgroup: Workgroup
2021-11-02 08:29:39.394 DBG default: = Services:
2021-11-02 08:29:39.394 DBG default: - acpid: true
2021-11-02 08:29:39.394 DBG default: - anacron: true
2021-11-02 08:29:39.394 DBG default: - bluetooth: true
2021-11-02 08:29:39.394 DBG default: - cpufrequtils: true
2021-11-02 08:29:39.394 DBG default: - cron: true
2021-11-02 08:29:39.394 DBG default: - cups: true
2021-11-02 08:29:39.394 DBG default: - dbus: true
2021-11-02 08:29:39.394 DBG default: - haveged: true
2021-11-02 08:29:39.394 DBG default: - hddtemp: true
2021-11-02 08:29:39.394 DBG default: - rsync: true
2021-11-02 08:29:39.394 DBG default: - saned: true
2021-11-02 08:29:39.394 DBG default: - smartmontools: true
2021-11-02 08:29:39.395 DBG default: - sudo: true
2021-11-02 08:29:39.395 DBG default: = Storage:
2021-11-02 08:29:39.395 DBG default: - Drive: sda
2021-11-02 08:29:39.395 DBG default: - DriveEncrypt: false
2021-11-02 08:29:39.395 DBG default: - RootPortion: 100
2021-11-02 08:29:39.395 DBG default: - Target: Drive
2021-11-02 08:29:39.395 DBG default: = User:
2021-11-02 08:29:39.395 DBG default: - Autologin: false
2021-11-02 08:29:39.395 DBG default: - EnableRoot: true
2021-11-02 08:29:39.395 DBG default: - SaveDesktop: false
2021-11-02 08:29:39.395 DBG default: - Username: Alex
2021-11-02 08:29:39.395 DBG default: End of configuration.
2021-11-02 08:29:39.395 DBG default: Exec #155: /bin/sync
2021-11-02 08:29:39.799 DBG default: Exit #155: 0 QProcess::NormalExit
2021-11-02 08:29:39.800 DBG default: << bool MInstall::installLoader() >>
2021-11-02 08:29:39.811 DBG default: Exec #156: /bin/ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2021-11-02 08:29:39.831 DBG default: Exit #156: 1 QProcess::NormalExit
2021-11-02 08:29:39.832 DBG default: Exec #157: /bin/mount -t efivarfs efivarfs /sys/firmware/efi/efivars
2021-11-02 08:29:39.848 DBG default: SErr #157: "mount: /sys/firmware/efi/efivars: efivarfs already mounted on /sys/firmware/efi/efivars.\n"
2021-11-02 08:29:39.849 DBG default: Exit #157: 32 QProcess::NormalExit
2021-11-02 08:29:39.849 DBG default: ++ Updating initramfs ++
2021-11-02 08:29:39.859 DBG default: Update initramfs
2021-11-02 08:29:39.859 DBG default: Exec #158: chroot /mnt/antiX update-initramfs -u -t -k all
2021-11-02 08:30:20.341 DBG default: SOut #158: "update-initramfs: Generating /boot/initrd.img-5.14.0-3mx-amd64\n"
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2021-11-02 08:30:20.342 DBG default: Exit #158: 0 QProcess::NormalExit
2021-11-02 08:30:20.351 DBG default: ++ Cleaning up ++
2021-11-02 08:30:20.363 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 08:30:20.363 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 08:30:20.363 DBG default: Exec #159: /bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1
This might be the problem
Code: Select all
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
*updated*
I tried to install the Xfce Version and it did not work. Then i tried ahs version with legacy enabled and i got the same error.[/spoiler]
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 6:38 am
by j2mcgreg
Alex wrote:
I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".
As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.
Currently I am downloading the Xfce Version without ahs and will try that.
I have a Probook that dates from 2017 and there are just three things that you have to do to install MX:
-- disable secure boot
-- disable fast boot
-- select 'use GPT Partitioning' when preparing the usb drive
Also in terms of the bios version on my machine "Legacy" means that you can roll back to Win 7. It does not mean that you can do an MBR based install.
Finally, when I do the initial install of a new version of MX (like MX 21), I always select the "automatically install using entire disk" option rather than custom partitioning. I don't see the point in complicating things on the first go round.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 6:46 am
by dolphin_oracle
Alex wrote: Tue Nov 02, 2021 5:15 am
No Boot Device Found *updated*
I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".
As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.
Currently I am downloading the Xfce Version without ahs and will try that.
My System Information
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP ProBook 455 G4 v: N/A serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: HP model: 823E v: KBC Version 37.28 serial: <filter> UEFI: HP v: P84 Ver. 01.01
date: 08/18/2016
Battery: ID-1: BAT0 charge: 26.5 Wh condition: 34.7/34.7 Wh (100%) volts: 11.4/11.4
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Discharging
CPU: Topology: Dual Core model: AMD A6-9210 RADEON R4 5 COMPUTE CORES 2C+3G bits: 64
type: MCP arch: Excavator family: 15 (21) model-id: 70 (112) stepping: N/A
microcode: 6006704 L2 cache: 1024 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 9581
Speed: 1296 MHz min/max: 1300/2400 MHz boost: enabled Core speeds (MHz): 1: 1297
2: 1297
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics] vendor: Hewlett-Packard
driver: amdgpu v: kernel bus ID: 00:01.0 chip ID: 1002:98e4
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL: renderer: AMD STONEY (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.5 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:01.1
chip ID: 1002:15b3
Device-2: AMD Family 15h Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:09.2 chip ID: 1022:157a
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: 2000 bus ID: 02:00.0
chip ID: 8086:095a
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 140.44 GiB used: 21.3 MiB (0.0%)
ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 00RL scheme: GPT
ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Partition: ID-1: / raw size: N/A size: 2.90 GiB used: 21.3 MiB (0.7%) fs: overlay
source: ERR-102
ID-2: swap-1 size: 5.62 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda3
Sensors: System Temperatures: cpu: 56.0 C mobo: 0.0 C gpu: amdgpu temp: 56 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Info: Processes: 202 Uptime: N/A Memory: 3.70 GiB used: 787.8 MiB (20.8%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Install Log (WARNING: Couldn't determine root device\nsed -> one of the last lines)
Code: Select all
2021-11-02 03:26:53.417 DBG default: Installer version: 21.10.14
2021-11-02 03:26:53.659 DBG default: << void MInstall::startup() >>
2021-11-02 03:26:53.660 DBG default: check for remastered home demo folder: false
2021-11-02 03:26:53.660 DBG default: Exec #1: du -sb /live/aufs/boot
2021-11-02 03:26:53.746 DBG default: Exit #1: 0 QProcess::NormalExit
2021-11-02 03:26:53.746 DBG default: linuxfs file is at : "/live/boot-dev/antiX/linuxfs"
2021-11-02 03:26:53.746 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-11-02 03:26:53.760 DBG default: Exit #2: 0 QProcess::NormalExit
2021-11-02 03:26:53.761 DBG default: linuxfs compression type is "6" compression factor is 25
2021-11-02 03:26:53.761 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-11-02 03:26:53.771 DBG default: Exit #3: 0 QProcess::NormalExit
2021-11-02 03:26:53.772 DBG default: linuxfs file size is 7366246400 rootfs file size is 0
2021-11-02 03:26:53.772 DBG default: Minimum space: 268435456 (boot), 8439988224 (root)
2021-11-02 03:26:53.772 DBG default: Exec #4: uname -m | grep -q i686
2021-11-02 03:26:53.782 DBG default: Exit #4: 1 QProcess::NormalExit
2021-11-02 03:26:53.782 DBG default: uefi = true
2021-11-02 03:26:53.782 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:26:53.782 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-11-02 03:26:53.808 DBG default: SOut #5: " 6204 ? 00:00:00 udisksd\n"
2021-11-02 03:26:53.808 DBG default: Exit #5: 0 QProcess::NormalExit
2021-11-02 03:26:53.808 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:26:53.828 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:26:53.828 DBG default: Exit #6: 2 QProcess::NormalExit
2021-11-02 03:26:53.828 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-11-02 03:26:53.844 DBG default: Exit #7: 1 QProcess::NormalExit
2021-11-02 03:26:53.845 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-11-02 03:26:53.845 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:26:53.852 DBG default: Exit #8: 0 QProcess::NormalExit
2021-11-02 03:26:53.852 DBG default: Exec #9: udevadm control --reload
2021-11-02 03:26:53.893 DBG default: Exit #9: 0 QProcess::NormalExit
2021-11-02 03:26:53.893 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-11-02 03:26:53.908 DBG default: Exit #10: 0 QProcess::NormalExit
2021-11-02 03:26:53.908 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-11-02 03:26:53.921 DBG default: Exit #11: 1 QProcess::NormalExit
2021-11-02 03:26:53.921 DBG default: check for possible snapshot: false
2021-11-02 03:26:54.071 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-11-02 03:26:54.085 DBG default: Exit #12: 0 QProcess::NormalExit
2021-11-02 03:26:54.088 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-11-02 03:26:54.106 DBG default: Exit #13: 0 QProcess::NormalExit
2021-11-02 03:26:54.107 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-11-02 03:26:54.207 DBG default: Exit #14: 1 QProcess::NormalExit
2021-11-02 03:26:54.207 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-11-02 03:26:54.248 DBG default: Exit #15: 0 QProcess::NormalExit
2021-11-02 03:26:54.254 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2021-11-02 03:26:54.254 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-11-02 03:26:54.270 DBG default: Exit #16: 0 QProcess::NormalExit
2021-11-02 03:26:54.270 DBG default: Exec #17: partprobe -s
2021-11-02 03:26:55.599 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:26:55.599 DBG default: SErr #17: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:26:55.599 DBG default: Exit #17: 1 QProcess::NormalExit
2021-11-02 03:26:55.599 DBG default: Exec #18: blkid -c /dev/null
2021-11-02 03:26:55.709 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5983-8B16\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"24102219-523e-4445-bcfe-9983da03b775\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"5ec45faf-3fbd-4209-8444-616d35dd84ad\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2f508784-8ce8-4d30-968a-bb47aa5a3b27\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"7bcef7db-366f-4a28-983b-abbcd3e93554\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"24717057-588d-42d3-8d90-59150c78f5b9\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:26:55.709 DBG default: Exit #18: 0 QProcess::NormalExit
2021-11-02 03:26:55.709 DBG default: Exec #19: parted -lm
2021-11-02 03:26:55.940 DBG default: Exit #19: 0 QProcess::NormalExit
2021-11-02 03:26:55.941 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-11-02 03:26:55.962 DBG default: Exit #20: 32 QProcess::NormalExit
2021-11-02 03:27:00.531 DBG default: Exec #21: command -v system-keyboard-qt >/dev/null 2>&1
2021-11-02 03:27:00.571 DBG default: Exit #21: 0 QProcess::NormalExit
2021-11-02 03:27:00.571 DBG default: Exec #22: system-keyboard-qt
2021-11-02 03:27:20.854 DBG default: SErr #22: "\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.638: Unable to locate theme engine in module_path: \"clearlooks\",\n\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.639: Unable to locate theme engine in module_path: \"clearlooks\",\n\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"us\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\nqt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 912, resource id: 18879146, major code: 40 (TranslateCoords), minor code: 0\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"pc105\\\"\\nXKBLAYOUT=\\\"de\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2021-11-02 03:27:20.854 DBG default: Exit #22: 0 QProcess::NormalExit
2021-11-02 03:27:41.221 DBG default: Mount points:
2021-11-02 03:27:41.221 DBG default: - "/" - "sda2" "sda2" "/dev/sda2"
2021-11-02 03:27:41.221 DBG default: - "SWAP" - "sda3" "sda3" "/dev/sda3"
2021-11-02 03:27:41.241 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1260, resource id: 18881660, major code: 40 (TranslateCoords), minor code: 0
2021-11-02 03:27:41.314 DBG default: ++ Preparing to install MX Linux ++
2021-11-02 03:27:41.319 DBG default: Exec #23: smartctl -H /dev/sda
2021-11-02 03:27:41.864 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-11-02 03:27:41.864 DBG default: Exit #23: 0 QProcess::NormalExit
2021-11-02 03:27:41.864 DBG default: Exec #24: smartctl -A /dev/sda| grep -E "^ 5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-11-02 03:27:41.912 DBG default: Exit #24: 0 QProcess::NormalExit
2021-11-02 03:27:41.913 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 03:27:41.913 DBG default: Exec #25: /bin/umount -l /mnt/antiX/boot/efi
2021-11-02 03:27:41.924 DBG default: SErr #25: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-11-02 03:27:41.924 DBG default: Exit #25: 32 QProcess::NormalExit
2021-11-02 03:27:41.924 DBG default: Exec #26: /bin/umount -l /mnt/antiX/proc
2021-11-02 03:27:41.934 DBG default: SErr #26: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-11-02 03:27:41.934 DBG default: Exit #26: 32 QProcess::NormalExit
2021-11-02 03:27:41.934 DBG default: Exec #27: /bin/umount -l /mnt/antiX/sys
2021-11-02 03:27:41.945 DBG default: SErr #27: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-11-02 03:27:41.945 DBG default: Exit #27: 32 QProcess::NormalExit
2021-11-02 03:27:41.945 DBG default: Exec #28: /bin/umount -l /mnt/antiX/dev/shm
2021-11-02 03:27:41.955 DBG default: SErr #28: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-11-02 03:27:41.955 DBG default: Exit #28: 32 QProcess::NormalExit
2021-11-02 03:27:41.955 DBG default: Exec #29: /bin/umount -l /mnt/antiX/dev
2021-11-02 03:27:41.964 DBG default: SErr #29: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-11-02 03:27:41.964 DBG default: Exit #29: 32 QProcess::NormalExit
2021-11-02 03:27:41.964 DBG default: Exec #30: swapoff /dev/sda2
2021-11-02 03:27:41.977 DBG default: SErr #30: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:41.977 DBG default: Exit #30: 4 QProcess::NormalExit
2021-11-02 03:27:41.977 DBG default: Exec #31: /bin/umount -l /mnt/antiX/
2021-11-02 03:27:41.987 DBG default: SErr #31: "umount: /mnt/antiX/: no mount point specified.\n"
2021-11-02 03:27:41.988 DBG default: Exit #31: 32 QProcess::NormalExit
2021-11-02 03:27:41.988 DBG default: << bool PartMan::preparePartitions() >>
2021-11-02 03:27:41.988 DBG default: Exec #32: lsblk -nro name /dev/sda
2021-11-02 03:27:42.001 DBG default: Exit #32: 0 QProcess::NormalExit
2021-11-02 03:27:42.001 DBG default: Exec #33: swapoff /dev/sda
2021-11-02 03:27:42.011 DBG default: SErr #33: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.011 DBG default: Exit #33: 4 QProcess::NormalExit
2021-11-02 03:27:42.011 DBG default: Exec #34: /bin/umount /dev/sda
2021-11-02 03:27:42.023 DBG default: SErr #34: "umount: /dev/sda: not mounted.\n"
2021-11-02 03:27:42.023 DBG default: Exit #34: 32 QProcess::NormalExit
2021-11-02 03:27:42.023 DBG default: Exec #35: swapoff /dev/sda2
2021-11-02 03:27:42.036 DBG default: SErr #35: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.036 DBG default: Exit #35: 4 QProcess::NormalExit
2021-11-02 03:27:42.036 DBG default: Exec #36: /bin/umount /dev/sda2
2021-11-02 03:27:42.051 DBG default: SErr #36: "umount: /dev/sda2: not mounted.\n"
2021-11-02 03:27:42.051 DBG default: Exit #36: 32 QProcess::NormalExit
2021-11-02 03:27:42.051 DBG default: Exec #37: swapoff /dev/sda3
2021-11-02 03:27:42.067 DBG default: Exit #37: 0 QProcess::NormalExit
2021-11-02 03:27:42.068 DBG default: Exec #38: /bin/umount /dev/sda3
2021-11-02 03:27:42.081 DBG default: SErr #38: "umount: /dev/sda3: not mounted.\n"
2021-11-02 03:27:42.081 DBG default: Exit #38: 32 QProcess::NormalExit
2021-11-02 03:27:42.081 DBG default: Exec #39: swapoff /dev/sda1
2021-11-02 03:27:42.092 DBG default: SErr #39: "swapoff: /dev/sda1: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.092 DBG default: Exit #39: 4 QProcess::NormalExit
2021-11-02 03:27:42.092 DBG default: Exec #40: /bin/umount /dev/sda1
2021-11-02 03:27:42.105 DBG default: SErr #40: "umount: /dev/sda1: not mounted.\n"
2021-11-02 03:27:42.105 DBG default: Exit #40: 32 QProcess::NormalExit
2021-11-02 03:27:42.105 DBG default: ++ Preparing partition tables ++
2021-11-02 03:27:42.110 DBG default: Exec #41: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-11-02 03:27:42.164 DBG default: SErr #41: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.0411501 s, 102 MB/s\n"
2021-11-02 03:27:42.164 DBG default: Exit #41: 0 QProcess::NormalExit
2021-11-02 03:27:42.164 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=1831617
2021-11-02 03:27:42.220 DBG default: SErr #42: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4128768 bytes (4.1 MB, 3.9 MiB) copied, 0.0359852 s, 115 MB/s\n"
2021-11-02 03:27:42.220 DBG default: Exit #42: 1 QProcess::NormalExit
2021-11-02 03:27:42.220 DBG default: Exec #43: parted -s /dev/sda mklabel gpt
2021-11-02 03:27:42.281 DBG default: Exit #43: 0 QProcess::NormalExit
2021-11-02 03:27:42.281 DBG default: ++ Preparing required partitions ++
2021-11-02 03:27:42.291 DBG default: Exec #44: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-11-02 03:27:42.370 DBG default: Exit #44: 0 QProcess::NormalExit
2021-11-02 03:27:42.376 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 257MiB 108713MiB
2021-11-02 03:27:42.499 DBG default: Exit #45: 0 QProcess::NormalExit
2021-11-02 03:27:42.506 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 108713MiB 114473MiB
2021-11-02 03:27:42.679 DBG default: Exit #46: 0 QProcess::NormalExit
2021-11-02 03:27:42.733 DBG default: Exec #47: partprobe -s
2021-11-02 03:27:44.153 DBG default: SOut #47: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:44.153 DBG default: SErr #47: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:27:44.153 DBG default: Exit #47: 1 QProcess::NormalExit
2021-11-02 03:27:44.153 DBG default: << bool PartMan::formatPartitions() >>
2021-11-02 03:27:44.153 DBG default: ++ Formatting: EFI System Partition ++
2021-11-02 03:27:44.163 DBG default: Exec #48: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-11-02 03:27:44.424 DBG default: SOut #48: "mkfs.fat 4.2 (2021-01-31)\n"
2021-11-02 03:27:44.425 DBG default: SErr #48: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-11-02 03:27:44.425 DBG default: Exit #48: 0 QProcess::NormalExit
2021-11-02 03:27:44.425 DBG default: Exec #49: parted -s /dev/sda set 1 esp on
2021-11-02 03:27:44.536 DBG default: Exit #49: 0 QProcess::NormalExit
2021-11-02 03:27:44.536 DBG default: ++ Formatting: / (root) ++
2021-11-02 03:27:44.543 DBG default: Exec #50: mkfs.ext4 -F /dev/sda2 -L "rootMX21"
2021-11-02 03:27:52.005 DBG default: SOut #50: "Discarding device blocks: 4096/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 2625536/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 5246976/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b11014144/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b15208448/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b20451328/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b26742784/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone \nCreating filesystem with 27764736 4k blocks and 6946816 inodes\nFilesystem UUID: 1cff286a-8978-489b-812b-a71e2cb0a8cb\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone \nWriting inode tables: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information: 0/848\b\b\b\b\b\b\b \b\b\b\b\b\b\bdone\n\n"
2021-11-02 03:27:52.005 DBG default: SErr #50: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-11-02 03:27:52.005 DBG default: Exit #50: 0 QProcess::NormalExit
2021-11-02 03:27:52.005 DBG default: Exec #51: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-11-02 03:27:52.032 DBG default: SOut #51: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-11-02 03:27:52.032 DBG default: Exit #51: 0 QProcess::NormalExit
2021-11-02 03:27:52.032 DBG default: ++ Formatting: swap space ++
2021-11-02 03:27:52.038 DBG default: Exec #52: /sbin/mkswap /dev/sda3 -L "swapMX"
2021-11-02 03:27:52.068 DBG default: SOut #52: "Setting up swapspace version 1, size = 5.6 GiB (6039793664 bytes)\nLABEL=swapMX, UUID=6ebaaa24-177f-41c4-a4f3-5658721154b0\n"
2021-11-02 03:27:52.069 DBG default: SErr #52: "mkswap: /dev/sda3: warning: wiping old swap signature.\n"
2021-11-02 03:27:52.069 DBG default: Exit #52: 0 QProcess::NormalExit
2021-11-02 03:27:52.069 DBG default: << bool PartMan::mountPartitions() >>
2021-11-02 03:27:52.069 DBG default: ++ Mounting: /dev/sda2 ++
2021-11-02 03:27:52.080 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2021-11-02 03:27:52.080 DBG default: Exec #53: /bin/mount /dev/sda2 /mnt/antiX/ -o noatime
2021-11-02 03:27:52.155 DBG default: Exit #53: 0 QProcess::NormalExit
2021-11-02 03:27:52.155 DBG default: Exec #54: blkid -c /dev/null
2021-11-02 03:27:52.271 DBG default: SOut #54: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"8702-DE8F\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"50d7be26-538a-4577-8a4c-2e8132f5fd90\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"1cff286a-8978-489b-812b-a71e2cb0a8cb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"b7bdfa25-92dc-44dd-b6d3-e1d726f7c375\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"6ebaaa24-177f-41c4-a4f3-5658721154b0\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"28a1deff-3786-4fc5-b389-40bdf62d05d8\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:27:52.271 DBG default: Exit #54: 0 QProcess::NormalExit
2021-11-02 03:27:52.272 DBG default: << bool MInstall::installLinux() >>
2021-11-02 03:27:52.272 DBG default: ++ Creating system directories ++
2021-11-02 03:27:52.281 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:27:52.281 DBG default: Exec #55: ps -e | grep 'udisksd'
2021-11-02 03:27:52.306 DBG default: SOut #55: " 6204 ? 00:00:00 udisksd\n"
2021-11-02 03:27:52.306 DBG default: Exit #55: 0 QProcess::NormalExit
2021-11-02 03:27:52.306 DBG default: Exec #56: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:27:52.319 DBG default: SErr #56: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:27:52.319 DBG default: Exit #56: 2 QProcess::NormalExit
2021-11-02 03:27:52.319 DBG default: Exec #57: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:27:52.330 DBG default: Exit #57: 0 QProcess::NormalExit
2021-11-02 03:27:52.330 DBG default: Exec #58: udevadm control --reload
2021-11-02 03:27:52.351 DBG default: Exit #58: 0 QProcess::NormalExit
2021-11-02 03:27:52.351 DBG default: Exec #59: partprobe -s
2021-11-02 03:27:53.678 DBG default: SOut #59: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:53.678 DBG default: SErr #59: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
2021-11-02 03:27:53.678 DBG default: Exit #59: 1 QProcess::NormalExit
2021-11-02 03:27:53.685 DBG default: Sleep #1: 1000ms
2021-11-02 03:27:54.636 DBG default: Sleep #1: exit 0
2021-11-02 03:27:54.636 DBG default: << bool MInstall::copyLinux() >>
2021-11-02 03:27:54.641 DBG default: ++ Copying new system ++
2021-11-02 03:27:54.648 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2021-11-02 03:29:31.250 DBG default: Exit COPY: 0 QProcess::NormalExit
2021-11-02 03:29:31.250 DBG default: ++ Fixing configuration ++
2021-11-02 03:29:31.264 DBG default: Exec #60: /usr/sbin/live-to-installed /mnt/antiX
2021-11-02 03:29:31.441 DBG default: SErr #60: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.441 DBG default: Exit #60: 0 QProcess::NormalExit
2021-11-02 03:29:31.441 DBG default: Desktop menu
2021-11-02 03:29:31.441 DBG default: Exec #61: chroot /mnt/antiX desktop-menu --write-out-global
2021-11-02 03:29:31.460 DBG default: SErr #61: "chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.460 DBG default: Exit #61: 127 QProcess::NormalExit
2021-11-02 03:29:31.460 DBG default: Creating fstab entry for: "/" "/dev/sda2"
2021-11-02 03:29:31.460 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/sda2
2021-11-02 03:29:31.492 DBG default: Exit #62: 0 QProcess::NormalExit
2021-11-02 03:29:31.493 DBG default: Exec #63: blkid /dev/sda2 -o value -s TYPE
2021-11-02 03:29:31.507 DBG default: Exit #63: 0 QProcess::NormalExit
2021-11-02 03:29:31.507 DBG default: Creating fstab entry for: "SWAP" "/dev/sda3"
2021-11-02 03:29:31.507 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/sda3
2021-11-02 03:29:31.542 DBG default: Exit #64: 0 QProcess::NormalExit
2021-11-02 03:29:31.542 DBG default: Exec #65: blkid /dev/sda3 -o value -s TYPE
2021-11-02 03:29:31.558 DBG default: Exit #65: 0 QProcess::NormalExit
2021-11-02 03:29:31.558 DBG default: Exec #66: blkid -o value UUID -s UUID /dev/sda1
2021-11-02 03:29:31.586 DBG default: Exit #66: 0 QProcess::NormalExit
2021-11-02 03:29:31.587 DBG default: espdev "/dev/sda1" "UUID=8702-DE8F"
2021-11-02 03:29:31.587 DBG default: Exec #67: /bin/rm -rf /mnt/antiX/home/demo
2021-11-02 03:29:31.631 DBG default: Exit #67: 0 QProcess::NormalExit
2021-11-02 03:29:31.631 DBG default: Exec #68: /bin/rm -rf /mnt/antiX/media/sd*
2021-11-02 03:29:31.645 DBG default: Exit #68: 0 QProcess::NormalExit
2021-11-02 03:29:31.645 DBG default: Exec #69: /bin/rm -rf /mnt/antiX/media/hd*
2021-11-02 03:29:31.657 DBG default: Exit #69: 0 QProcess::NormalExit
2021-11-02 03:29:31.657 DBG default: Exec #70: guess-hwclock
2021-11-02 03:29:32.985 DBG default: Exit #70: 0 QProcess::NormalExit
2021-11-02 03:29:32.985 DBG default: Exec #71: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2021-11-02 03:29:33.006 DBG default: Exit #71: 0 QProcess::NormalExit
2021-11-02 03:29:33.006 DBG default: Exec #72: chroot /mnt/antiX rm /var/lib/dbus/machine-id /etc/machine-id
2021-11-02 03:29:33.053 DBG default: Exit #72: 0 QProcess::NormalExit
2021-11-02 03:29:33.053 DBG default: Exec #73: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2021-11-02 03:29:33.105 DBG default: Exit #73: 0 QProcess::NormalExit
2021-11-02 03:29:33.106 DBG default: Exec #74: chroot /mnt/antiX dbus-uuidgen --ensure
2021-11-02 03:29:33.132 DBG default: Exit #74: 0 QProcess::NormalExit
2021-11-02 03:29:33.132 DBG default: Exec #75: /bin/umount -R /mnt/antiX/dev
2021-11-02 03:29:33.155 DBG default: Exit #75: 0 QProcess::NormalExit
2021-11-02 03:29:33.155 DBG default: ++ Paused for required operator input ++
2021-11-02 03:29:33.211 DBG default: ++ Setting system configuration ++
2021-11-02 03:29:33.221 DBG default: Exec #76: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2021-11-02 03:29:33.275 DBG default: Exit #76: 1 QProcess::NormalExit
2021-11-02 03:29:33.275 DBG default: Exec #77: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.296 DBG default: Exit #77: 1 QProcess::NormalExit
2021-11-02 03:29:33.296 DBG default: Exec #78: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.311 DBG default: Exit #78: 1 QProcess::NormalExit
2021-11-02 03:29:33.311 DBG default: Exec #79: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.327 DBG default: Exit #79: 1 QProcess::NormalExit
2021-11-02 03:29:33.327 DBG default: Exec #80: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.342 DBG default: Exit #80: 1 QProcess::NormalExit
2021-11-02 03:29:33.342 DBG default: Exec #81: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2021-11-02 03:29:33.357 DBG default: Exit #81: 1 QProcess::NormalExit
2021-11-02 03:29:33.357 DBG default: Set service: "anacron" true
2021-11-02 03:29:33.357 DBG default: Exec #82: chroot /mnt/antiX update-rc.d anacron defaults
2021-11-02 03:29:33.521 DBG default: Exit #82: 0 QProcess::NormalExit
2021-11-02 03:29:33.521 DBG default: Exec #83: chroot /mnt/antiX systemctl enable anacron
2021-11-02 03:29:33.702 DBG default: SErr #83: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2021-11-02 03:29:33.702 DBG default: Exit #83: 0 QProcess::NormalExit
2021-11-02 03:29:33.702 DBG default: Set service: "cron" true
2021-11-02 03:29:33.702 DBG default: Exec #84: chroot /mnt/antiX update-rc.d cron defaults
2021-11-02 03:29:33.783 DBG default: Exit #84: 0 QProcess::NormalExit
2021-11-02 03:29:33.784 DBG default: Exec #85: chroot /mnt/antiX systemctl enable cron
2021-11-02 03:29:33.943 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2021-11-02 03:29:33.943 DBG default: Exit #85: 0 QProcess::NormalExit
2021-11-02 03:29:33.944 DBG default: Set service: "sudo" true
2021-11-02 03:29:33.944 DBG default: Exec #86: chroot /mnt/antiX update-rc.d sudo defaults
2021-11-02 03:29:34.027 DBG default: Exit #86: 0 QProcess::NormalExit
2021-11-02 03:29:34.027 DBG default: Exec #87: chroot /mnt/antiX systemctl enable sudo
2021-11-02 03:29:34.044 DBG default: SErr #87: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:34.044 DBG default: Exit #87: 1 QProcess::NormalExit
2021-11-02 03:29:34.044 DBG default: Set service: "cpufrequtils" true
2021-11-02 03:29:34.044 DBG default: Exec #88: chroot /mnt/antiX update-rc.d cpufrequtils defaults
2021-11-02 03:29:34.125 DBG default: Exit #88: 0 QProcess::NormalExit
2021-11-02 03:29:34.125 DBG default: Exec #89: chroot /mnt/antiX systemctl enable cpufrequtils
2021-11-02 03:29:34.283 DBG default: SErr #89: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2021-11-02 03:29:34.283 DBG default: Exit #89: 0 QProcess::NormalExit
2021-11-02 03:29:34.284 DBG default: Set service: "smartmontools" true
2021-11-02 03:29:34.284 DBG default: Exec #90: chroot /mnt/antiX update-rc.d smartmontools defaults
2021-11-02 03:29:34.365 DBG default: Exit #90: 0 QProcess::NormalExit
2021-11-02 03:29:34.365 DBG default: Exec #91: chroot /mnt/antiX systemctl enable smartmontools
2021-11-02 03:29:34.524 DBG default: SErr #91: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2021-11-02 03:29:34.524 DBG default: Exit #91: 0 QProcess::NormalExit
2021-11-02 03:29:34.524 DBG default: Set service: "acpid" true
2021-11-02 03:29:34.524 DBG default: Exec #92: chroot /mnt/antiX update-rc.d acpid defaults
2021-11-02 03:29:34.613 DBG default: Exit #92: 0 QProcess::NormalExit
2021-11-02 03:29:34.613 DBG default: Exec #93: chroot /mnt/antiX systemctl enable acpid
2021-11-02 03:29:34.776 DBG default: SErr #93: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2021-11-02 03:29:34.776 DBG default: Exit #93: 0 QProcess::NormalExit
2021-11-02 03:29:34.776 DBG default: Set service: "hddtemp" true
2021-11-02 03:29:34.776 DBG default: Exec #94: chroot /mnt/antiX update-rc.d hddtemp defaults
2021-11-02 03:29:34.859 DBG default: Exit #94: 0 QProcess::NormalExit
2021-11-02 03:29:34.859 DBG default: Exec #95: chroot /mnt/antiX systemctl enable hddtemp
2021-11-02 03:29:35.014 DBG default: SErr #95: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2021-11-02 03:29:35.014 DBG default: Exit #95: 0 QProcess::NormalExit
2021-11-02 03:29:35.015 DBG default: Set service: "dbus" true
2021-11-02 03:29:35.015 DBG default: Exec #96: chroot /mnt/antiX update-rc.d dbus defaults
2021-11-02 03:29:35.097 DBG default: Exit #96: 0 QProcess::NormalExit
2021-11-02 03:29:35.097 DBG default: Exec #97: chroot /mnt/antiX systemctl enable dbus
2021-11-02 03:29:35.257 DBG default: SErr #97: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n instance name specified.\n"
2021-11-02 03:29:35.257 DBG default: Exit #97: 0 QProcess::NormalExit
2021-11-02 03:29:35.257 DBG default: Set service: "saned" true
2021-11-02 03:29:35.257 DBG default: Exec #98: chroot /mnt/antiX update-rc.d saned defaults
2021-11-02 03:29:35.350 DBG default: Exit #98: 0 QProcess::NormalExit
2021-11-02 03:29:35.350 DBG default: Exec #99: chroot /mnt/antiX systemctl enable saned
2021-11-02 03:29:35.369 DBG default: SErr #99: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:35.369 DBG default: Exit #99: 1 QProcess::NormalExit
2021-11-02 03:29:35.369 DBG default: Set service: "haveged" true
2021-11-02 03:29:35.369 DBG default: Exec #100: chroot /mnt/antiX update-rc.d haveged defaults
2021-11-02 03:29:35.447 DBG default: Exit #100: 0 QProcess::NormalExit
2021-11-02 03:29:35.447 DBG default: Exec #101: chroot /mnt/antiX systemctl enable haveged
2021-11-02 03:29:35.607 DBG default: SErr #101: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2021-11-02 03:29:35.607 DBG default: Exit #101: 0 QProcess::NormalExit
2021-11-02 03:29:35.607 DBG default: Set service: "bluetooth" true
2021-11-02 03:29:35.607 DBG default: Exec #102: chroot /mnt/antiX update-rc.d bluetooth defaults
2021-11-02 03:29:35.688 DBG default: Exit #102: 0 QProcess::NormalExit
2021-11-02 03:29:35.688 DBG default: Exec #103: chroot /mnt/antiX systemctl enable bluetooth
2021-11-02 03:29:35.849 DBG default: SErr #103: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2021-11-02 03:29:35.849 DBG default: Exit #103: 0 QProcess::NormalExit
2021-11-02 03:29:35.849 DBG default: Set service: "rsync" true
2021-11-02 03:29:35.849 DBG default: Exec #104: chroot /mnt/antiX update-rc.d rsync defaults
2021-11-02 03:29:35.931 DBG default: Exit #104: 0 QProcess::NormalExit
2021-11-02 03:29:35.931 DBG default: Exec #105: chroot /mnt/antiX systemctl enable rsync
2021-11-02 03:29:36.089 DBG default: SErr #105: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2021-11-02 03:29:36.089 DBG default: Exit #105: 0 QProcess::NormalExit
2021-11-02 03:29:36.089 DBG default: Set service: "cups" true
2021-11-02 03:29:36.089 DBG default: Exec #106: chroot /mnt/antiX update-rc.d cups defaults
2021-11-02 03:29:36.173 DBG default: Exit #106: 0 QProcess::NormalExit
2021-11-02 03:29:36.173 DBG default: Exec #107: chroot /mnt/antiX systemctl enable cups
2021-11-02 03:29:36.330 DBG default: SErr #107: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2021-11-02 03:29:36.331 DBG default: Exit #107: 0 QProcess::NormalExit
2021-11-02 03:29:36.331 DBG default: Exec #108: sed -i 's/WORKGROUP/Workgroup/g' /mnt/antiX/etc/samba/smb.conf
2021-11-02 03:29:36.349 DBG default: Exit #108: 0 QProcess::NormalExit
2021-11-02 03:29:36.350 DBG default: Set service: "smbd" true
2021-11-02 03:29:36.350 DBG default: Exec #109: chroot /mnt/antiX update-rc.d smbd defaults
2021-11-02 03:29:36.431 DBG default: Exit #109: 0 QProcess::NormalExit
2021-11-02 03:29:36.431 DBG default: Exec #110: chroot /mnt/antiX systemctl enable smbd
2021-11-02 03:29:36.596 DBG default: SErr #110: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2021-11-02 03:29:36.596 DBG default: Exit #110: 0 QProcess::NormalExit
2021-11-02 03:29:36.596 DBG default: Set service: "nmbd" true
2021-11-02 03:29:36.596 DBG default: Exec #111: chroot /mnt/antiX update-rc.d nmbd defaults
2021-11-02 03:29:36.696 DBG default: Exit #111: 0 QProcess::NormalExit
2021-11-02 03:29:36.696 DBG default: Exec #112: chroot /mnt/antiX systemctl enable nmbd
2021-11-02 03:29:36.858 DBG default: SErr #112: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2021-11-02 03:29:36.859 DBG default: Exit #112: 0 QProcess::NormalExit
2021-11-02 03:29:36.859 DBG default: Set service: "samba-ad-dc" true
2021-11-02 03:29:36.859 DBG default: Exec #113: chroot /mnt/antiX update-rc.d samba-ad-dc defaults
2021-11-02 03:29:36.948 DBG default: Exit #113: 0 QProcess::NormalExit
2021-11-02 03:29:36.948 DBG default: Exec #114: chroot /mnt/antiX systemctl enable samba-ad-dc
2021-11-02 03:29:36.966 DBG default: SErr #114: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:36.966 DBG default: Exit #114: 1 QProcess::NormalExit
2021-11-02 03:29:36.966 DBG default: Exec #115: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Alex-ProBook/' /mnt/antiX/etc/hosts
2021-11-02 03:29:37.016 DBG default: Exit #115: 0 QProcess::NormalExit
2021-11-02 03:29:37.017 DBG default: Exec #116: echo "Alex-ProBook" | cat > /mnt/antiX/etc/hostname
2021-11-02 03:29:37.034 DBG default: Exit #116: 0 QProcess::NormalExit
2021-11-02 03:29:37.034 DBG default: Exec #117: echo "Alex-ProBook" | cat > /mnt/antiX/etc/mailname
2021-11-02 03:29:37.049 DBG default: Exit #117: 0 QProcess::NormalExit
2021-11-02 03:29:37.049 DBG default: Exec #118: sed -i 's/.*send host-name.*/send host-name "Alex-ProBook";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2021-11-02 03:29:37.066 DBG default: Exit #118: 0 QProcess::NormalExit
2021-11-02 03:29:37.066 DBG default: Exec #119: echo "Alex-ProBook" | cat > /mnt/antiX/etc/defaultdomain
2021-11-02 03:29:37.083 DBG default: Exit #119: 0 QProcess::NormalExit
2021-11-02 03:29:37.083 DBG default: << void MInstall::setLocale() >>
2021-11-02 03:29:37.083 DBG default: Update locale
2021-11-02 03:29:37.083 DBG default: Exec #120: chroot /mnt/antiX /usr/sbin/update-locale "LANG=de_DE.UTF-8"
2021-11-02 03:29:37.139 DBG default: Exit #120: 0 QProcess::NormalExit
2021-11-02 03:29:37.139 DBG default: Exec #121: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2021-11-02 03:29:37.162 DBG default: Exit #121: 0 QProcess::NormalExit
2021-11-02 03:29:37.162 DBG default: Exec #122: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2021-11-02 08:29:37.180 DBG default: Exit #122: 0 QProcess::NormalExit
2021-11-02 08:29:37.180 DBG default: Exec #123: echo Europe/Berlin > /mnt/antiX/etc/timezone
2021-11-02 08:29:37.195 DBG default: Exit #123: 0 QProcess::NormalExit
2021-11-02 08:29:37.195 DBG default: Exec #124: echo Europe/Berlin > /etc/timezone
2021-11-02 08:29:37.212 DBG default: Exit #124: 0 QProcess::NormalExit
2021-11-02 08:29:37.212 DBG default: Exec #125: echo '0.0 0 0.0
0
UTC' > /etc/adjtime
2021-11-02 08:29:37.227 DBG default: Exit #125: 0 QProcess::NormalExit
2021-11-02 08:29:37.227 DBG default: Exec #126: hwclock --hctosys
2021-11-02 08:29:38.000 DBG default: Exit #126: 0 QProcess::NormalExit
2021-11-02 08:29:38.001 DBG default: Exec #127: /bin/cp -f /etc/adjtime /mnt/antiX/etc/
2021-11-02 08:29:38.019 DBG default: Exit #127: 0 QProcess::NormalExit
2021-11-02 08:29:38.019 DBG default: Exec #128: /bin/cp -f /etc/default/rcS /mnt/antiX/etc/default
2021-11-02 08:29:38.038 DBG default: Exit #128: 0 QProcess::NormalExit
2021-11-02 08:29:38.038 DBG default: Exec #129: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.055 DBG default: SErr #129: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.055 DBG default: Exit #129: 2 QProcess::NormalExit
2021-11-02 08:29:38.055 DBG default: Exec #130: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.071 DBG default: SErr #130: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.071 DBG default: Exit #130: 2 QProcess::NormalExit
2021-11-02 08:29:38.072 DBG default: Exec #131: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.089 DBG default: Exit #131: 0 QProcess::NormalExit
2021-11-02 08:29:38.089 DBG default: Exec #132: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.125 DBG default: Exit #132: 0 QProcess::NormalExit
2021-11-02 08:29:38.125 DBG default: Exec #133: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.145 DBG default: SErr #133: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.145 DBG default: Exit #133: 2 QProcess::NormalExit
2021-11-02 08:29:38.145 DBG default: Exec #134: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.162 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.163 DBG default: Exit #134: 2 QProcess::NormalExit
2021-11-02 08:29:38.163 DBG default: Exec #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2021-11-02 08:29:38.180 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2021-11-02 08:29:38.180 DBG default: Exit #135: 2 QProcess::NormalExit
2021-11-02 08:29:38.180 DBG default: Exec #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2021-11-02 08:29:38.197 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2021-11-02 08:29:38.197 DBG default: Exit #136: 2 QProcess::NormalExit
2021-11-02 08:29:38.197 DBG default: Exec #137: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2021-11-02 08:29:38.223 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2021-11-02 08:29:38.223 DBG default: Exit #137: 2 QProcess::NormalExit
2021-11-02 08:29:38.223 DBG default: Localize repo
2021-11-02 08:29:38.223 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2021-11-02 08:29:38.329 DBG default: SOut #138: "File: mx.list\n"
2021-11-02 08:29:38.329 DBG default: Exit #138: 0 QProcess::NormalExit
2021-11-02 08:29:38.329 DBG default: Exec #139: chroot /mnt/antiX chpasswd
2021-11-02 08:29:38.477 DBG default: Exit #139: 0 QProcess::NormalExit
2021-11-02 08:29:38.477 DBG default: Exec #140: /bin/cp -a /mnt/antiX/etc/skel /mnt/antiX/home/Alex
2021-11-02 08:29:39.111 DBG default: Exit #140: 0 QProcess::NormalExit
2021-11-02 08:29:39.111 DBG default: Exec #141: chown -R demo:demo /mnt/antiX/home/Alex
2021-11-02 08:29:39.139 DBG default: Exit #141: 0 QProcess::NormalExit
2021-11-02 08:29:39.139 DBG default: Exec #142: sed -i 's/demo/Alex/g' /mnt/antiX/etc/group
2021-11-02 08:29:39.159 DBG default: Exit #142: 0 QProcess::NormalExit
2021-11-02 08:29:39.159 DBG default: Exec #143: sed -i 's/demo/Alex/g' /mnt/antiX/etc/gshadow
2021-11-02 08:29:39.179 DBG default: Exit #143: 0 QProcess::NormalExit
2021-11-02 08:29:39.179 DBG default: Exec #144: sed -i 's/demo/Alex/g' /mnt/antiX/etc/passwd
2021-11-02 08:29:39.198 DBG default: Exit #144: 0 QProcess::NormalExit
2021-11-02 08:29:39.198 DBG default: Exec #145: sed -i 's/demo/Alex/g' /mnt/antiX/etc/shadow
2021-11-02 08:29:39.217 DBG default: Exit #145: 0 QProcess::NormalExit
2021-11-02 08:29:39.218 DBG default: Exec #146: sed -i 's/demo/Alex/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.236 DBG default: SErr #146: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.236 DBG default: Exit #146: 2 QProcess::NormalExit
2021-11-02 08:29:39.236 DBG default: Exec #147: sed -i 's/demo/Alex/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.255 DBG default: Exit #147: 0 QProcess::NormalExit
2021-11-02 08:29:39.255 DBG default: Exec #148: sed -i 's/demo/Alex/g' /mnt/antiX/home/*/.gtkrc-2.0
2021-11-02 08:29:39.273 DBG default: SErr #148: "sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.273 DBG default: Exit #148: 2 QProcess::NormalExit
2021-11-02 08:29:39.273 DBG default: Exec #149: sed -i 's/demo/Alex/g' /mnt/antiX/root/.gtkrc-2.0
2021-11-02 08:29:39.291 DBG default: SErr #149: "sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.291 DBG default: Exit #149: 2 QProcess::NormalExit
2021-11-02 08:29:39.291 DBG default: Exec #150: sed -i 's/auto_login/#auto_login/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.308 DBG default: SErr #150: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.308 DBG default: Exit #150: 2 QProcess::NormalExit
2021-11-02 08:29:39.308 DBG default: Exec #151: sed -i 's/default_user /#default_user /g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.326 DBG default: SErr #151: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.327 DBG default: Exit #151: 2 QProcess::NormalExit
2021-11-02 08:29:39.327 DBG default: Exec #152: sed -i 's/autologin-user=/#autologin-user=/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.345 DBG default: Exit #152: 0 QProcess::NormalExit
2021-11-02 08:29:39.345 DBG default: Exec #153: sed -i 's/User=.*/User=/g' /mnt/antiX/etc/sddm.conf
2021-11-02 08:29:39.362 DBG default: SErr #153: "sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2021-11-02 08:29:39.362 DBG default: Exit #153: 2 QProcess::NormalExit
2021-11-02 08:29:39.362 DBG default: Exec #154: touch /mnt/antiX/var/mail/Alex
2021-11-02 08:29:39.380 DBG default: Exit #154: 0 QProcess::NormalExit
2021-11-02 08:29:39.393 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2021-11-02 08:29:39.393 DBG default: - Product: MX Linux 21
2021-11-02 08:29:39.393 DBG default: - Version: 21.10.14
2021-11-02 08:29:39.393 DBG default: = GRUB:
2021-11-02 08:29:39.393 DBG default: - Install: false
2021-11-02 08:29:39.393 DBG default: - Location: sda1
2021-11-02 08:29:39.393 DBG default: - TargetType: ESP
2021-11-02 08:29:39.393 DBG default: = Localization:
2021-11-02 08:29:39.393 DBG default: - ClockHours: 24
2021-11-02 08:29:39.393 DBG default: - LocalClock: false
2021-11-02 08:29:39.393 DBG default: - Locale: de_DE.UTF-8
2021-11-02 08:29:39.393 DBG default: - Timezone: Europe/Berlin
2021-11-02 08:29:39.394 DBG default: = Network:
2021-11-02 08:29:39.394 DBG default: - ComputerName: Alex-ProBook
2021-11-02 08:29:39.394 DBG default: - Domain: example.dom
2021-11-02 08:29:39.394 DBG default: - Samba: true
2021-11-02 08:29:39.394 DBG default: - Workgroup: Workgroup
2021-11-02 08:29:39.394 DBG default: = Services:
2021-11-02 08:29:39.394 DBG default: - acpid: true
2021-11-02 08:29:39.394 DBG default: - anacron: true
2021-11-02 08:29:39.394 DBG default: - bluetooth: true
2021-11-02 08:29:39.394 DBG default: - cpufrequtils: true
2021-11-02 08:29:39.394 DBG default: - cron: true
2021-11-02 08:29:39.394 DBG default: - cups: true
2021-11-02 08:29:39.394 DBG default: - dbus: true
2021-11-02 08:29:39.394 DBG default: - haveged: true
2021-11-02 08:29:39.394 DBG default: - hddtemp: true
2021-11-02 08:29:39.394 DBG default: - rsync: true
2021-11-02 08:29:39.394 DBG default: - saned: true
2021-11-02 08:29:39.394 DBG default: - smartmontools: true
2021-11-02 08:29:39.395 DBG default: - sudo: true
2021-11-02 08:29:39.395 DBG default: = Storage:
2021-11-02 08:29:39.395 DBG default: - Drive: sda
2021-11-02 08:29:39.395 DBG default: - DriveEncrypt: false
2021-11-02 08:29:39.395 DBG default: - RootPortion: 100
2021-11-02 08:29:39.395 DBG default: - Target: Drive
2021-11-02 08:29:39.395 DBG default: = User:
2021-11-02 08:29:39.395 DBG default: - Autologin: false
2021-11-02 08:29:39.395 DBG default: - EnableRoot: true
2021-11-02 08:29:39.395 DBG default: - SaveDesktop: false
2021-11-02 08:29:39.395 DBG default: - Username: Alex
2021-11-02 08:29:39.395 DBG default: End of configuration.
2021-11-02 08:29:39.395 DBG default: Exec #155: /bin/sync
2021-11-02 08:29:39.799 DBG default: Exit #155: 0 QProcess::NormalExit
2021-11-02 08:29:39.800 DBG default: << bool MInstall::installLoader() >>
2021-11-02 08:29:39.811 DBG default: Exec #156: /bin/ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2021-11-02 08:29:39.831 DBG default: Exit #156: 1 QProcess::NormalExit
2021-11-02 08:29:39.832 DBG default: Exec #157: /bin/mount -t efivarfs efivarfs /sys/firmware/efi/efivars
2021-11-02 08:29:39.848 DBG default: SErr #157: "mount: /sys/firmware/efi/efivars: efivarfs already mounted on /sys/firmware/efi/efivars.\n"
2021-11-02 08:29:39.849 DBG default: Exit #157: 32 QProcess::NormalExit
2021-11-02 08:29:39.849 DBG default: ++ Updating initramfs ++
2021-11-02 08:29:39.859 DBG default: Update initramfs
2021-11-02 08:29:39.859 DBG default: Exec #158: chroot /mnt/antiX update-initramfs -u -t -k all
2021-11-02 08:30:20.341 DBG default: SOut #158: "update-initramfs: Generating /boot/initrd.img-5.14.0-3mx-amd64\n"
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2021-11-02 08:30:20.342 DBG default: Exit #158: 0 QProcess::NormalExit
2021-11-02 08:30:20.351 DBG default: ++ Cleaning up ++
2021-11-02 08:30:20.363 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 08:30:20.363 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 08:30:20.363 DBG default: Exec #159: /bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1
This might be the problem
Code: Select all
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
*updated*
I tried to install the Xfce Version and it did not work. Then i tried ahs version with legacy enabled and i got the same error.
so let me see if I understand.
1. you have other MX releases installed that you *did* install grub for?
2. you are not installing grub this time, rather relying on a pre-existing grub boot loader (which you did an update-grub on?)
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 8:48 am
by Alex
j2mcgreg wrote: Tue Nov 02, 2021 6:38 amI have a Probook that dates from 2017 and there are just three things that you have to do to install MX:
-- disable secure boot
-- disable fast boot
-- select 'use GPT Partitioning' when preparing the usb drive
Also in terms of the bios version on my machine "Legacy" means that you can roll back to Win 7. It does not mean that you can do an MBR based install.
Finally, when I do the initial install of a new version of MX (like MX 21), I always select the "automatically install using entire disk" option rather than custom partitioning. I don't see the point in complicating things on the first go round.
I'll try that, thank you.
dolphin_oracle wrote: Tue Nov 02, 2021 6:46 am
so let me see if I understand.
1. you have other MX releases installed that you *did* install grub for?
2. you are not installing grub this time, rather relying on a pre-existing grub boot loader (which you did an update-grub on?)
The way you ask makes me think i have to have grub installed to boot any os even if i don't want to use different os on the same machine. If that is the case, i'm a fool and wasted a lot of time... i unchecked the box during installation
* xxxxxxx me for being a complete idiot... It's working.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 2:44 pm
by MXRobo
Used the installer to create and mount /mnt/DATA partition (as well as /mnt/Restore) and permission is denied when I try to save save a file, create a folder or mkdir yields Permission denied. I assume that I can fix with
Code: Select all
sudo chown -R yourusername: /mnt/DATA
but I am reporting this as an issue, not necessarily for a fix.
This function worked fine in MX-21 Xfce NON-AHS.
I have both MX-21-Xfce and MX-21-Xfce AHS installed on this laptop.
EDIT - Added /home users:
Pav15:/home
$ ls
lost+found rmx15 rxa15
Pav15:/boot/efi/EFI
$ ls
BOOT MX21
Seems to be a problem.
How do I differentiate between the regular MX and the AHS MX?
blkid:
Code: Select all
/dev/nvme0n1p7: LABEL="DATA" UUID="c3b56eae-3284-4c07-b17c-f853c13e0c72" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="DATA" PARTUUID="5f29ba5b-3872-4441-b4ac-0078830da43d"
/dev/nvme0n1p8: LABEL="Restore" UUID="ba9ad05b-3242-4668-8475-0dce74f22a9b" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="Restore" PARTUUID="daf29cc5-12e9-473d-8212-d493dc8a314e"
Code: Select all
cd /mnt/DATA
mkdir Documents Downloads Music Pictures Videos Screenshots
mkdir: cannot create directory ‘Documents’: Permission denied
mkdir: cannot create directory ‘Downloads’: Permission denied
etc. for other directories.
/var/log/minstall.log WAS TOO BIG TO POST MOST OF IT! MOST OF IT WAS DELETED TO SHRINK FOR POST.
Code: Select all
2021-11-02 00:22:44.954 DBG default: Installer version: 21.10.14
[b]MXROBO NOT IN CODE NOT IN CODE MOST OF CODE REMOVED AS DUE TO TOO BIG TO POST[/b]
2021-11-02 00:27:43.002 DBG default: SErr #207: "W: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_gpu_info.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/vangogh_gpu_info.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_ta.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_sos.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_ta.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_toc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_asd.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_ta.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_sos.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_rlc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_mec2.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_mec.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_rlc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_mec2.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_mec.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_me.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_pfp.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_ce.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_rlc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_mec2.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_mec.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_me.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_pfp.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_ce.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_sdma.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_sdma.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_sdma.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_mes.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_vcn.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_vcn.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_vcn.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_smc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/aldebaran_smc.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_dmcub.bin for module amdgpu\nW: Possible missing firmware /lib/firmware/amdgpu/beige_goby_dmcub.bin for module amdgpu\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2021-11-02 00:27:43.002 DBG default: Exit #207: 0 QProcess::NormalExit
2021-11-02 00:27:43.009 DBG default: clear chroot env
2021-11-02 00:27:43.009 DBG default: Exec #208: /bin/umount -R /mnt/antiX/run
2021-11-02 00:27:43.020 DBG default: Exit #208: 0 QProcess::NormalExit
2021-11-02 00:27:43.021 DBG default: Exec #209: /bin/umount -R /mnt/antiX/proc
2021-11-02 00:27:43.033 DBG default: Exit #209: 0 QProcess::NormalExit
2021-11-02 00:27:43.033 DBG default: Exec #210: /bin/umount -R /mnt/antiX/sys
2021-11-02 00:27:43.045 DBG default: Exit #210: 0 QProcess::NormalExit
2021-11-02 00:27:43.045 DBG default: Exec #211: /bin/umount -R /mnt/antiX/dev
2021-11-02 00:27:43.058 DBG default: Exit #211: 0 QProcess::NormalExit
2021-11-02 00:27:43.058 DBG default: Exec #212: mountpoint -q /mnt/antiX/boot/efi
2021-11-02 00:27:43.069 DBG default: Exit #212: 0 QProcess::NormalExit
2021-11-02 00:27:43.069 DBG default: Exec #213: /bin/umount /mnt/antiX/boot/efi
2021-11-02 00:27:43.081 DBG default: Exit #213: 0 QProcess::NormalExit
2021-11-02 00:27:43.088 DBG default: ++ Cleaning up ++
2021-11-02 00:27:43.095 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 00:27:43.096 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 00:27:43.096 DBG default: Exec #214: /bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP Pavilion Laptop 15z-eh000 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: HP model: 87C5 v: 35.24 serial: <filter> UEFI: AMI v: F.10 date: 11/03/2020
Battery: ID-1: BAT0 charge: 42.5 Wh condition: 42.5/42.5 Wh (100%) volts: 12.9/11.3
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full cycles: 382
CPU: Topology: 8-Core model: AMD Ryzen 7 4700U with Radeon Graphics bits: 64 type: MCP
arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 microcode: 8600106
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 31939
Speed: 1395 MHz min/max: 1400/2000 MHz boost: enabled Core speeds (MHz): 1: 1407
2: 1449 3: 1656 4: 1397 5: 1398 6: 1397 7: 1397 8: 1397
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Renoir vendor: Hewlett-Packard driver: amdgpu v: kernel bus ID: 04:00.0
chip ID: 1002:1636
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:1637
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel bus ID: 04:00.5 chip ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 04:00.6 chip ID: 1022:15e3
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A port: f000 bus ID: 02:00.0
chip ID: 10ec:c822
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 931.51 GiB used: 6.35 GiB (0.7%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T2B0C-00PXH0 size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 211070WD scheme: GPT
Partition: ID-1: / raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 6.09 GiB (20.8%) fs: ext4
dev: /dev/nvme0n1p6
ID-2: /home raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 264.1 MiB (0.9%)
fs: ext4 dev: /dev/nvme0n1p4
ID-3: /tmp raw size: 8.00 GiB size: 7.78 GiB (97.21%) used: 564 KiB (0.0%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme0n1p2
Sensors: System Temperatures: cpu: 55.1 C mobo: N/A gpu: amdgpu temp: 42 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 267 Uptime: 39m Memory: 15.01 GiB used: 1.83 GiB (12.2%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Again, as always, I'm a newbie and could have errored with the installer, and I did it rather quickly because I feel that I know it fairly well now - yes contradictory.
Hope it helps.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 2:59 pm
by MXRobo
Mouse and Touchpad Keeps reverting to Mouse.
Seems to work OK, but it's just that it won't retain the Touchpad.
This happens between simply closing the Mouse and Touchpad window and reopening the window.
A logout or reboot is not required for this. This happens in both MX-21-Xfce AHS and MX-21-Xfce.
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP Pavilion Laptop 15z-eh000 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: HP model: 87C5 v: 35.24 serial: <filter> UEFI: AMI v: F.10 date: 11/03/2020
Battery: ID-1: BAT0 charge: 42.5 Wh condition: 42.5/42.5 Wh (100%) volts: 12.9/11.3
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full cycles: 382
CPU: Topology: 8-Core model: AMD Ryzen 7 4700U with Radeon Graphics bits: 64 type: MCP
arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 microcode: 8600106
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 31937
Speed: 1397 MHz min/max: 1400/2000 MHz boost: enabled Core speeds (MHz): 1: 1397
2: 1478 3: 1395 4: 1397 5: 1396 6: 1397 7: 1397 8: 1397
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Renoir vendor: Hewlett-Packard driver: amdgpu v: kernel bus ID: 04:00.0
chip ID: 1002:1636
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:1637
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel bus ID: 04:00.5 chip ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 04:00.6 chip ID: 1022:15e3
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A port: f000 bus ID: 02:00.0
chip ID: 10ec:c822
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 931.51 GiB used: 6.35 GiB (0.7%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T2B0C-00PXH0 size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 211070WD scheme: GPT
Partition: ID-1: / raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 6.09 GiB (20.8%) fs: ext4
dev: /dev/nvme0n1p6
ID-2: /home raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 262.1 MiB (0.9%)
fs: ext4 dev: /dev/nvme0n1p4
ID-3: /tmp raw size: 8.00 GiB size: 7.78 GiB (97.21%) used: 32 KiB (0.0%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme0n1p2
Sensors: System Temperatures: cpu: 55.0 C mobo: N/A gpu: amdgpu temp: 38 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 276 Uptime: 5m Memory: 15.01 GiB used: 1.17 GiB (7.8%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Thank you.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:05 pm
by MXRobo
HDMI audio, Alsamixer S/PDIF(s) muted.
HDMI audio, Need to select sound card, then unmute S/PDIFs as they are either all, or some are muted.
No HDMI audio. Unmuting sound card(s) in Alsamixer fixes the problem.
Alsamix Selecting sound card: 0 HD-Audio Generic the first available sound card after default reveals the either one (1) or both of the S/PDIFs are muted - shown in either F3 (Playback) or F5 (All).
alsactl init, followed by
sudo alsactl store do not retain the settings.
The following do not work:
Code: Select all
amixer set -c0 Master unmute
amixer set -c0 Capture unmute
amixer set IEC958 unmute
amixer set 'IEC958 Optical' 100 unmute
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP Pavilion Laptop 15z-eh000 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: HP model: 87C5 v: 35.24 serial: <filter> UEFI: AMI v: F.10 date: 11/03/2020
Battery: ID-1: BAT0 charge: 42.5 Wh condition: 42.5/42.5 Wh (100%) volts: 12.9/11.3
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full cycles: 382
CPU: Topology: 8-Core model: AMD Ryzen 7 4700U with Radeon Graphics bits: 64 type: MCP
arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 microcode: 8600106
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 31937
Speed: 1397 MHz min/max: 1400/2000 MHz boost: enabled Core speeds (MHz): 1: 1397
2: 1716 3: 1484 4: 1436 5: 1397 6: 1397 7: 1397 8: 1397
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Renoir vendor: Hewlett-Packard driver: amdgpu v: kernel bus ID: 04:00.0
chip ID: 1002:1636
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:1637
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel bus ID: 04:00.5 chip ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 04:00.6 chip ID: 1022:15e3
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A port: f000 bus ID: 02:00.0
chip ID: 10ec:c822
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 931.51 GiB used: 6.35 GiB (0.7%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T2B0C-00PXH0 size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 211070WD scheme: GPT
Partition: ID-1: / raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 6.09 GiB (20.8%) fs: ext4
dev: /dev/nvme0n1p6
ID-2: /home raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 264.4 MiB (0.9%)
fs: ext4 dev: /dev/nvme0n1p4
ID-3: /tmp raw size: 8.00 GiB size: 7.78 GiB (97.21%) used: 32 KiB (0.0%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme0n1p2
Sensors: System Temperatures: cpu: 53.9 C mobo: N/A gpu: amdgpu temp: 42 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 265 Uptime: 10m Memory: 15.01 GiB used: 1.42 GiB (9.4%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
and it more likely to be an isolated hardware/software compatibility issue.
Thanks
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:09 pm
by dolphin_oracle
@MXRobo Thanks for the reports!
Data partition: its not really a bug. if you use the installer to create a new Data partition, the file system will be created and owned by the root user. the same will be true if you use gparted or if you use the default settings for mkfs.ext4.
if you want the whole partition owned by a particular user, then the procedure you propose is correct. You could also have top level folders owned by different users for instance, with different permissions. I do this on my ext data partitions. the top level is owned by root, but I own all the subfolders that my user needs to do things. the situation is analogous to a /home partition. /home itself is usually owned by root, but the user home folders /home/$USER are owned by the $USER.
incidentally, the installers on ahs vs. non-ahs are the same. the version on the ahs iso is slightly newer but not in this regard. the linux core-utils on the back end is also identical.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:21 pm
by MXRobo
@dolphin_oracle
You're more than welcome for the reports, thank you for the distro.
I'm new, so I get most of what your saying (and I will get all of it), and as a lone user, I don't really need to know the other users stuff yet, and thanks for the /home root, home folder owner info.
And it looks like you addressed my concern, but I really reported this because the permissions were fine on the NON-AHS install, same install method - I believe.
Also, is this a concern?
EDIT - Added /home users:
Pav15:/home
$ ls
lost+found rmx15 rxa15
Pav15:/boot/efi/EFI
$ ls
BOOT MX21
Thanks
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:26 pm
by dolphin_oracle
is what a concern? looks about right to me.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:40 pm
by MXRobo
I thought that my /boot/efi/EFI should show two different distros that are installed, both MX-21-Xfce and MX-21-Xfce-AHS.
EDIT-2: Shown: Two usernames, one distro indicated. Reality: Two usernames, two distros installed.
EDIT: Identical laptop with Mint and MX-21 installed, and I get:
BOOT MX21 ubuntu
indicating the two different distros.
If I'm wrong, sorry in advance.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:49 pm
by dolphin_oracle
MXRobo wrote: Tue Nov 02, 2021 3:40 pm
I thought that my /boot/efi/EFI should show two different distros that are installed, both MX-21-Xfce and MX-21-Xfce-AHS.
EDIT: Identical laptop with Mint and MX-21 installed, and I get:
BOOT MX21 ubuntu
indicating the two different distros.
If I'm wrong, sorry in advance.
the efi files are the same for all editions of MX, so they overwrite each other.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 3:59 pm
by MXRobo
@dolphin_oracle
So to confirm; that is NOT a problem.
Thanks
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 4:11 pm
by fehlix
MXRobo wrote: Tue Nov 02, 2021 2:44 pm
Pav15:/boot/efi/EFI
$ ls
BOOT MX21
Seems to be a problem.
How do I differentiate between the regular MX and the AHS MX?
The installer just uses the name "MX21" for the UEFI boot option entry and the directory name on the ESP under /boot/efi/EFI, regardless whether Xfce, Xfce AHS, KDE or Fluxbox will be installed.
The same goes for the displayed entry within the GRUB menu, for all MX21 installs, where it would display "MX 21 Wildflower"
Also having more then one MX21 installed, it might be worth to consider to label the root-partition during installation accordingly, to avoid having multiple root partitions with identical names. In case of encrypted installs labeling the boot-partition would be of help also.
The current "workaround" I'm using post install to get some differentiation within the UEFI boot option listed names
and also within the GRUB menu could look like this:
After installation I do this:
Fix UEFI boot loader entries:
Post install either re-boot into the installed system or alternatively do not reboot and open Chroot-Rescue-Scan.
In either case within terminal do reinstall GRUB onto the ESP (EFI System partition) and give it another name:
* for "MX 21 Xfce"
Code: Select all
sudo grub-install --bootloader-id "MX21xfce" --force-extra-removable --recheck
* for "MX 21 AHS"
Code: Select all
sudo grub-install --bootloader-id "MX21ahs" --force-extra-removable --recheck
* for "MX 21 KDE"
Code: Select all
sudo grub-install --bootloader-id "MX21kde" --force-extra-removable --recheck
* Adjust within /etc/lsb-release these two lines:
e.g for MX21 AHS
Code: Select all
PRETTY_NAME="MX 21 AHS Wildflower"
DISTRIB_DESCRIPTION="MX 21 AHS Wildflower"
or for MX 21 (Xfce) no-ahs:
Code: Select all
PRETTY_NAME="MX 21 Xfce Wildflower"
DISTRIB_DESCRIPTION="MX 21 Xfce Wildflower"
* After changes have been made re-generate GRUB menu by running this:
Do this for all MX-21 installes, accordingly.
HTH
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 5:26 pm
by MXRobo
@fehlix
I almost always re-label in Gparted to differentiate and I am aware of the Grub menu from very recent experience.
But, I'm not too concerned with pretty names as I'm more concerned with functionality - as long as it works.
Originally, I thought it may be a bug, and I also thought that the distro entry in the /boot/efi/EFI and the username in the /home directory should be deleted when removing distros, that's one of the reasons that I wanted to differentiate. Also, I thought this may mix things up, similar to using the same usernames.
Currently, I'm just playing and will eventually figure out which distro(s) and versions I want to run. I'm going to have MX, because I love the newer packages in MXPI Testing, and Backports with the stability of Debian, but Mint works perfectly OOTB - particularly for the complete newbie laptop recipient.
So, sorry that I wasted you time with your kindly offered workarounds.
But Thank You, and I'll keep this in mind.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 6:46 pm
by fehlix
MXRobo wrote: Tue Nov 02, 2021 5:26 pm
So, sorry that I wasted you time with your kindly offered workarounds.
You might have missed the point of the reply, b/c other user might have the same question, hence the answer to the question for other user too.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 02, 2021 11:04 pm
by MXRobo
Reported as potential issue, I'm not personally looking for a fix - I can live without it,
as I'll not normally have two MX distros installed at the same time, but....
Two distros installed:
Installed MX21-Xfce 1st
Installed MX21-Xfce-RC3-AHS 2nd
I can login to the last install - Xfce-AHS.
I can not login to the first install - Xfce.
I encountered this previously, but I reinstalled both distros to be certain that I didn't simply forget my password.
I get an error that is something like this:
ACPI BIOS error (bug) failure creating named object [\SMIB], AE already exists
ACPI error: AE not found, while solving named reference packa
Enter password for maintenance
Press Ctrl D to continue.
Hitting Ctrl D takes me to the login screen, but the password is not recognized.
I haven't tried fehlix's workaround, again not personally concerned.
QSI
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP Pavilion Laptop 15z-eh000 v: N/A serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: HP model: 87C5 v: 35.24 serial: <filter> UEFI: AMI v: F.10 date: 11/03/2020
Battery: ID-1: BAT0 charge: 42.5 Wh condition: 42.5/42.5 Wh (100%) volts: 12.9/11.3
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full cycles: 382
CPU: Topology: 8-Core model: AMD Ryzen 7 4700U with Radeon Graphics bits: 64 type: MCP
arch: Zen family: 17 (23) model-id: 60 (96) stepping: 1 microcode: 8600106
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 31939
Speed: 1397 MHz min/max: 1400/2000 MHz boost: enabled Core speeds (MHz): 1: 1397
2: 1397 3: 1397 4: 1402 5: 1397 6: 1397 7: 1397 8: 1397
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Renoir vendor: Hewlett-Packard driver: amdgpu v: kernel bus ID: 04:00.0
chip ID: 1002:1636
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:1637
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel bus ID: 04:00.5 chip ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 04:00.6 chip ID: 1022:15e3
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A port: f000 bus ID: 02:00.0
chip ID: 10ec:c822
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 931.51 GiB used: 6.26 GiB (0.7%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T2B0C-00PXH0 size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 211070WD scheme: GPT
Partition: ID-1: / raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 6.10 GiB (20.8%) fs: ext4
dev: /dev/nvme0n1p6
ID-2: /home raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 168.0 MiB (0.6%)
fs: ext4 dev: /dev/nvme0n1p4
ID-3: /tmp raw size: 8.00 GiB size: 7.78 GiB (97.21%) used: 544 KiB (0.0%) fs: ext4
dev: /dev/nvme0n1p3
ID-4: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme0n1p2
Sensors: System Temperatures: cpu: 50.2 C mobo: N/A gpu: amdgpu temp: 36 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Info: Processes: 272 Uptime: 25m Memory: 15.01 GiB used: 1.47 GiB (9.8%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
HTH
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 05, 2021 6:20 am
by davemx
@MXRobo something similar happened to me. If you can log into the newer install, from there, mount the older one, and check /etc/fstab . When you installed the second one, its UUID may have changed.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 05, 2021 11:16 am
by Leodudu
High CPU usage from Xorg
With Mx Linux, the CPU usage by Xorg is about 30%. With Pop Os, with the same hardware, the usage is about 10% or slightly less.
The script below runs automatically at the start of the session (sometimes it fails, and I run it in the terminal).
Code: Select all
#!/bin/bash
xrandr --setprovideroutputsource NVIDIA-G0 modesetting
xrandr --output eDP-1 --primary --mode 1920x1080 --pos 1600x0 --rotate normal --reflect normal --output HDMI-1-0 --mode 1600x900 --pos 0x0 --rotate normal --output DP-1-0 --mode 1920x1080 --pos 3520x0 --rotate normal
Code: Select all
top - 11:54:33 up 3 min, 1 user, load average: 0,46, 0,20, 0,07
Tarefas: 311 total, 1 em exec., 310 dormindo, 0 parado, 0 zumbi
%Cpu(s): 3,9 us, 0,7 sy, 0,1 ni, 95,3 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st
MB mem : 15771,2 total, 12722,8 livre, 1404,9 usados, 1643,6 buff/cache
MB swap: 8192,0 total, 8192,0 livre, 0,0 usados, 13486,7 mem dispon.
PID USUARIO PR NI VIRT RES SHR S %CPU %MEM TEMPO+ COMANDO
2886 root 20 0 25,0g 187000 145604 S 36,4 1,2 0:55.92 Xorg
4441 userr 20 0 3591924 419620 200924 S 14,2 2,6 0:26.51 GeckoMain
4721 userr 20 0 2851384 248056 135284 S 6,3 1,5 0:12.26 Web Content
2913 root -51 0 0 0 0 S 1,3 0,0 0:02.15 irq/194-nvidia
3398 userr 20 0 559484 86148 65752 S 1,0 0,5 0:02.04 xfwm4
1783 root 20 0 0 0 0 S 0,7 0,0 0:01.05 nvidia-modeset/
4283 userr 20 0 393032 44440 33984 S 0,7 0,3 0:01.54 xfce4-terminal
4296 userr 20 0 305464 22992 18684 S 0,7 0,1 0:00.81 conky
4990 userr 20 0 501980 96736 77860 S 0,7 0,6 0:00.41 featherpad
23 root 20 0 0 0 0 S 0,3 0,0 0:00.72 ksoftirqd/2
79 root 20 0 0 0 0 I 0,3 0,0 0:00.85 kworker/u24:8-events_unbound
132 root 20 0 0 0 0 I 0,3 0,0 0:00.02 kworker/10:1-mm_percpu_wq
375 root 20 0 0 0 0 S 0,3 0,0 0:00.02 jbd2/nvme1n1p2-
3501 userr 20 0 1308876 21172 13776 S 0,3 0,1 0:00.66 pulseaudio
1 root 20 0 3292 1904 1748 S 0,0 0,0 0:00.31 init
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp
4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp
5 root 20 0 0 0 0 I 0,0 0,0 0:00.00 kworker/0:0-events
6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker/0:0H-events_highpri
7 root 20 0 0 0 0 I 0,0 0,0 0:00.09 kworker/0:1-mm_percpu_wq
Code: Select all
System: Host: <filter> Kernel: 5.14.0-2mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-2mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_x64 Wildflower October 10 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Dell product: G3 3500 v: N/A serial: <filter> Chassis: type: 10
serial: <filter>
Mobo: Dell model: 0W4V06 v: A00 serial: <filter> UEFI: Dell v: 1.9.0 date: 06/01/2021
Battery: ID-1: BAT0 charge: 44.1 Wh condition: 67.9/68.0 Wh (100%) volts: 15.2/15.2
model: SMP DELL 72WGV13 type: Li-poly serial: <filter> status: Unknown
CPU: Topology: 6-Core model: Intel Core i7-10750H bits: 64 type: MT MCP arch: N/A
family: 6 model-id: A5 (165) stepping: 2 microcode: EA L2 cache: 12.0 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399
Speed: 2241 MHz min/max: 800/5000 MHz Core speeds (MHz): 1: 1228 2: 933 3: 800 4: 800
5: 800 6: 800 7: 984 8: 800 9: 800 10: 801 11: 800 12: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Dell driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:9bc4
Device-2: NVIDIA TU106M [GeForce RTX 2060 Mobile] vendor: Dell driver: nvidia
v: 470.63.01 bus ID: 01:00.0 chip ID: 10de:1f15
Display: x11 server: X.Org 1.20.13 driver: modesetting,nvidia
unloaded: fbdev,nouveau,vesa alternate: nv
resolution: 1920x1080~144Hz, 1600x900~60Hz, 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics (CML GT2) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio: Device-1: Intel Comet Lake PCH cAVS vendor: Dell driver: sof-audio-pci-intel-cnl
bus ID: 00:1f.3 chip ID: 8086:06c8
Device-2: NVIDIA TU106 High Definition Audio vendor: Dell driver: snd_hda_intel
v: kernel bus ID: 01:00.1 chip ID: 10de:10f9
Device-3: Texas Instruments PCM2902 Audio Codec type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-1.1.2:8 chip ID: 08bb:2902
Sound Server: ALSA v: k5.14.0-2mx-amd64
Network: Device-1: Intel Comet Lake PCH CNVi WiFi driver: iwlwifi v: kernel port: 5000
bus ID: 00:14.3 chip ID: 8086:06f0
IF: wlan0 state: down mac: <filter>
Device-2: Realtek vendor: Dell driver: r8169 v: kernel port: 3000 bus ID: 3c:00.0
chip ID: 10ec:2502
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 931.51 GiB used: 201.59 GiB (21.6%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 2B2QEXM7 scheme: GPT
ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter>
rev: 3B2QEXM7 scheme: GPT
Partition: ID-1: / raw size: 923.25 GiB size: 907.69 GiB (98.31%) used: 201.59 GiB (22.2%)
fs: ext4 dev: /dev/nvme1n1p2
ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme1n1p3
Sensors: System Temperatures: cpu: 60.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.ufam.edu.br/mx/mx/repo/ bullseye main non-free
2: deb http://mirror.ufam.edu.br/mx/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http://repository.spotify.com stable non-free
Active apt repos in: /etc/apt/sources.list.d/teams.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/ms-teams stable main
Info: Processes: 299 Uptime: 13m Memory: 15.40 GiB used: 1.76 GiB (11.4%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 05, 2021 12:03 pm
by MXRobo
davemx wrote: Fri Nov 05, 2021 6:20 am
@MXRobo something similar happened to me. If you can log into the newer install, from there, mount the older one, and check /etc/fstab . When you installed the second one, its UUID may have changed.
@davemx
Thanks for the info. I have since removed and reinstalled one MX only, but I'll keep this in mind.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 05, 2021 12:28 pm
by SwampRabbit
Leodudu wrote: Fri Nov 05, 2021 11:16 am
High CPU usage from Xorg
With Mx Linux, the CPU usage by Xorg is about 30%. With Pop Os, with the same hardware, the usage is about 10% or slightly less.
Interesting, I haven't seen Xorg sucking up that much resources constantly on the two systems I'm running MX-21 AHS RC3 on, but I'll take a look next time I'm messing with them.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 12:17 pm
by MXRobo
Hello,
Will the MX21-Xfce-AHS final will have the 5.14 kernel or the 5.15 kernel as the default kernel,
or are you not disclosing that yet? My primary question is about the kernel, not the disclosure.
And, as I understand - 5.14 is not LTS, but 5.15 is LTS or will be, is that correct?
I wait with "baited" breath.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 12:38 pm
by SwampRabbit
MXRobo wrote: Sat Nov 06, 2021 12:17 pm
Hello,
Will the MX21-Xfce-AHS final will have the 5.14 kernel or the 5.15 kernel as the default kernel,
or are you not disclosing that yet? My primary question is about the kernel, not the disclosure.
And, as I understand - 5.14 is not LTS, but 5.15 is LTS or will be, is that correct?
I wait with "baited" breath.
I don't know really, I messaged dolphin_oracle about that, but haven't gotten back on our Dev Slack channel yet as I'm testing some other things under another AHS RC install.
Personally I would prefer to go to 5.15 because it is an LTS and because to hopefully fix potential issues some users are having with 5.14.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 12:48 pm
by SwampRabbit
Leodudu wrote: Fri Nov 05, 2021 11:16 am
High CPU usage from Xorg
With Mx Linux, the CPU usage by Xorg is about 30%. With Pop Os, with the same hardware, the usage is about 10% or slightly less.
I've been monitoring xorg usage since you're post, I've not seen it go over maybe 4-5% without having a bunch of things open or something doing a lot of work.
This is on a all AMD system and an Intel small board computer, so I can't verify there isn't a issue with systems similar to yours.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 1:26 pm
by Leodudu
SwampRabbit wrote: Sat Nov 06, 2021 12:48 pm
I've been monitoring xorg usage since you're post, I've not seen it go over maybe 4-5% without having a bunch of things open or something doing a lot of work.
This is on a all AMD system and an Intel small board computer, so I can't verify there isn't a issue with systems similar to yours.
I noticed one difference: on Pop Os, it is not running nvidia-modeset.
Code: Select all
Tarefas: 349 total, 1 em exec., 348 dormindo, 0 parado, 0 zumbi
%CPU(s): 0,2 us, 0,5 sis, 0,0 ni, 99,2 oc, 0,0 ag, 0,0 ih, 0,1 is 0,0 tr
MB mem : 15763,2 total, 11760,8 livre, 1646,0 usados, 2356,5 buff/cache
MB swap: 4095,5 total, 4095,5 livre, 0,0 usados, 13756,3 mem dispon.
PID USUARIO PR NI VIRT RES SHR S %CPU %MEM TEMPO+ COMANDO
5506 root 20 0 24,4g 152024 78792 S 6,6 0,9 0:09.92 Xorg
8051 userrr 20 0 562616 53812 40680 S 5,0 0,3 0:02.15 gnome-terminal-
5368 userrr 9 -11 2199712 21220 16008 S 3,0 0,1 0:03.50 pulseaudio
6302 userrr 20 0 3941348 328020 124176 S 2,7 2,0 0:07.47 gnome-shell
862 root -51 0 0 0 0 S 1,3 0,0 0:02.58 irq/193-nvidia
876 root 0 -20 0 0 0 I 1,0 0,0 0:00.37 kworker/u25:2-i915_flip
1259 root 20 0 332392 15816 12920 S 0,7 0,1 0:00.65 touchegg
13 root 20 0 0 0 0 I 0,3 0,0 0:00.16 rcu_sched
1258 root 20 0 285204 10992 9980 S 0,3 0,1 0:00.87 thermald
7732 userrr 20 0 2443884 101220 80404 S 0,3 0,6 0:00.41 WebExtensions
7796 userrr 20 0 2451708 129788 93888 S 0,3 0,8 0:02.24 Web Content
8070 userrr 20 0 23008 4416 3544 R 0,3 0,0 0:00.13 top
1 root 20 0 165208 11272 7772 S 0,0 0,1 0:01.10 systemd
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
3 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_gp
4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 rcu_par_gp
5 root 20 0 0 0 0 I 0,0 0,0 0:00.00 kworker/0:0-kacpi_notify
6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker/0:0H-events_highpri
7 root 20 0 0 0 0 I 0,0 0,0 0:00.04 kworker/0:1-events_freezable
8 root 20 0 0 0 0 I 0,0 0,0 0:00.20 kworker/u24:0-events_unbound
9 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_wq
10 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_tasks_rude_
11 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_tasks_trace
12 root 20 0 0 0 0 S 0,0 0,0 0:00.01 ksoftirqd/0
14 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0
15 root -51 0 0 0 0 S 0,0 0,0 0:00.00 idle_inject/0
16 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/0
17 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/1
18 root -51 0 0 0 0 S 0,0 0,0 0:00.00 idle_inject/1
19 root rt 0 0 0 0 S 0,0 0,0 0:00.10 migration/1
20 root 20 0 0 0 0 S 0,0 0,0 0:00.01 ksoftirqd/1
21 root 20 0 0 0 0 I 0,0 0,0 0:00.00 kworker/1:0-events
22 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker/1:0H-events_highpri
23 root 20 0 0 0 0 S 0,0 0,0 0:00.00 cpuhp/2
24 root -51 0 0 0 0 S 0,0 0,0 0:00.00 idle_inject/2
25 root rt 0 0 0 0 S 0,0 0,0 0:00.10 migration/2
26 root 20 0 0 0 0 S 0,0 0,0 0:00.01 ksoftirqd/2
27 root 20 0 0 0 0 I 0,0 0,0 0:00.00 kworker/2:0-events
28 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker/2:0H-events_highpri
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 1:32 pm
by SwampRabbit
Leodudu wrote: Sat Nov 06, 2021 1:26 pm
I noticed one difference: on Pop Os, it is not running nvidia-modeset.
Interesting find, not sure what that does if the top of my head, maybe someone that knows stuff about Nvidia can confirm and shed some light.
Edit: I assume the same would be true for regular MX then, since nothing special is done for Nvidia on MX except maybe the package versions and kernel.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 1:55 pm
by datalus
I can confirm that MX 21 RC3 LiveMedium is unstable on an Intel small board computer (Atom, Goldmont) while using the modesetting driver. After a week of light testing while streaming video via web browser, Firefox would crash and/or the whole OS would crash. GLX gears looks nice though. Video is streaming real nice and smooth.
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: Compulab model: fitlet2 v: 1.21 serial: <filter>
UEFI: American Megatrends v: FLT2.0.46.01.00 date: 09/17/2018
CPU: Topology: Quad Core model: Intel Atom E3950 bits: 64 type: MCP arch: Goldmont
family: 6 model-id: 5C (92) stepping: 9 microcode: 44 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 12748
Speed: 1561 MHz min/max: 800/2000 MHz Core speeds (MHz): 1: 1988 2: 1992 3: 1977
4: 1896
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:5a84
Display: x11 server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel HD Graphics 505 (APL 3) v: 4.6 Mesa 21.2.3
direct render: Yes
Audio: Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
driver: snd_hda_intel v: kernel bus ID: 00:0e.0 chip ID: 8086:5a98
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Intel I211 Gigabit Network driver: igb v: kernel port: e000 bus ID: 01:00.0
chip ID: 8086:1539
IF: eth0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network driver: igb v: kernel port: d000 bus ID: 02:00.0
chip ID: 8086:1539
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 469.15 GiB used: 499.0 MiB (0.1%)
ID-1: /dev/sda model: INDMEM SSD M.2 2260 256GB size: 238.47 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 7A scheme: GPT
ID-2: /dev/sdb type: USB vendor: PNY model: USB 3.1 FD size: 230.67 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR
Partition: ID-1: / raw size: N/A size: 12.30 GiB used: 499.0 MiB (4.0%) fs: overlay
source: ERR-102
Sensors: System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Info: Processes: 198 Uptime: 8m Memory: 15.46 GiB used: 1.34 GiB (8.7%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
I just figured out how turn on Persistence with LiveMedium.
@dolphin_oracle, I read you said the Intel driver is a more stable option now? I'm currently giving that a try.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 2:24 pm
by datalus
just figured out how turn on Persistence with LiveMedium.
I take that back. I haven't successfully figured that out. Specifically, I'm using LiveUSB. Ultimately here, I'm trying to test the Intel i915 driver.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Sat Nov 06, 2021 2:35 pm
by dolphin_oracle
datalus wrote: Sat Nov 06, 2021 2:24 pm
just figured out how turn on Persistence with LiveMedium.
I take that back. I haven't successfully figured that out. Specifically, I'm using LiveUSB. Ultimately here, I'm trying to test the Intel i915 driver.
i915 is the kenrel driver. "intel" is the xorg driver.
when you specify a persistence option, the first time it makes the persistence files. if the persistence option is specified in the future, then the system will use existing persistence files.
there are save options in the boot menu options to make those sorts of changes happen everytime.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 08, 2021 2:36 pm
by BasicSloth
I finished my test with "MX-21 ahs". here are my results:
- Installing OS -
Pass
- Starting installed OS -
Pass
- Installing VMWare Client for work from home (and work from home) -
Pass
- Installing Microsoft Teams and run it -
Pass
- Installing Teamviewer and run it -
Pass
- Installing Digikam and do some basic tasks -
Pass
- Installing Paperwork and caliber scanner -
Pass (hell that never worked before - jippi)
- Installing German language Pack for libre office -
Pass
- Installing Lutris and run one of my all time favorite games -
Pass
- Installing Steam and run a Linux native game -
Pass
- Youtube 4K Test -
Pass
- Youtube nervous clicking Test -
Failed i noticed once, that i heard the sound of the video, but the picture were freezed - Maybe an artifact like a bad internet bandwith .
- Run a Windows Game over SteamPlay -
Failed
I tested the stuff I need in my daily work and entertainment. Actually this can and will be my system.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 08, 2021 2:43 pm
by SwampRabbit
BasicSloth wrote: Mon Nov 08, 2021 2:36 pm
- Youtube nervous clicking Test -
Failed i noticed once, that i heard the sound of the video, but the picture were freezed - Maybe an artifact like a bad internet bandwith .
- Run a Windows Game over SteamPlay -
Failed
Thanks for the testing.
I don’t know what the YouTube test above even is, so not sure where to even start with that.
Same for the SteamPlay game, would have to know more as testing on my end proves it works in general.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 08, 2021 6:40 pm
by talera
SwampRabbit wrote: Mon Nov 08, 2021 2:43 pm
Same for the SteamPlay game, would have to know more as testing on my end proves it works in general.
I would be interested in this too as I did not experience any issues with SteamPlay so far.
BasicSloth wrote: Mon Nov 08, 2021 2:36 pm
- Run a Windows Game over SteamPlay -
Failed
Just to be sure - have you tested this specific game on another Linux Distribution with SteamPlay and did it worked there?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 09, 2021 9:37 am
by BasicSloth
SwampRabbit wrote: Mon Nov 08, 2021 2:43 pm
I don’t know what the YouTube test above even is, so not sure where to even start with that.
The Test is quit easy. Watching random videos and then change the position of the video. So go forward or backwards. I did it several times. And as I was testing, I noticed, that the picture were frozen, but the sound were playing. I think it has nothing to do with the OS. And it's more a problem with my internet bandwidth.
talera wrote: Mon Nov 08, 2021 6:40 pm
Same for the SteamPlay game, would have to know more as testing on my end proves it works in general.
I only testet two Games:
World of Warships
Did not start at all. I did not tried any tweaks
Kingdom Come Deliverance
(would be a hard one to miss for me)
I did some tweaks (coping some files from one folder to the other in the bin directory) i found on youtube. But the game did not run nether i used tweaks or not.
The game started, but in the main screen, the menu never appears and it never stopped loading.
I also tried gamemodeon, but with that it does not start at all (guess it is not installed
)
I did not test it on an other Distro. I tried to install SteamOS but that OS won't start at all. I will give popOS a try.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 09, 2021 10:44 am
by talera
I have checked both on proton.db and according to them you should in general be fine with both games.
May I ask for your System Information from MX21 Ahs RC3?
I saw you have already posted the information in a different thread but this was on the Beta-Version of MX and there your XOrg-Driver was not loaded. I would like to compare them if you don‘t mind :)
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 09, 2021 7:26 pm
by SwampRabbit
@BasicSloth when you say "SteamPlay" you're talking about playing Windows games off a remote Windows computer (asking cause you used the word "over" earlier) or that you are using Proton?
If I had to guess these games may need a specific version of Proton, if you know what you used wth MX-19, I would try that version. I don't think this a MX-21 AHS specific issue, but it would be nice to find out the issue with these games.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Tue Nov 09, 2021 8:26 pm
by SwampRabbit
datalus wrote: Sat Nov 06, 2021 1:55 pm
I can confirm that MX 21 RC3 LiveMedium is unstable on an Intel small board computer (Atom, Goldmont) while using the modesetting driver. After a week of light testing while streaming video via web browser, Firefox would crash and/or the whole OS would crash. GLX gears looks nice though. Video is streaming real nice and smooth.
I saw this when you posted it, sorry for not replying right away. I need to look at the specs of the system you shared some more. I've seen the Fitlet2 before, never bought one myself though.
I have a Odroid H2+ that I've been doing MX-21 testing on since Alpha, not the same mind you, but I also ran MX-21 Fluxbox on a Atomic Pi for awhile. Done lots of testing on X86 SBCs without real issue.
My assumption is that your SBC should work without issue, the Xorg modesetting driver should work with this SBC, but it just might be on the cusp of the time line and the Intel driver may be better. You can use MX Tweak > Other Tab to change it, you'll need to at least log out and back in after.
The hardware shouldn't need AHS actually, can you try the standard MX-21 Xfce from a live USB at least.
I say this because the 5.14 is pretty stable but the 5.10 kernel is really stable, and the rest of the AHS bits while good.... aren't considered "stable" to Debian standards yet. There could be minor bugs affecting certain hardware like we've been experiencing with suspend issues recently with AHS RC.
Have you had this Fitlet2 long?
Temps weren't/aren't an issue?
Were using using it with Mint (some shipped with Mint) before without issue?
Old QSI just for reference from the H2 (again not the same thing as yours)
Code: Select all
System: Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_rc1_x64 Wildflower October 4 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: HARDKERNEL model: ODROID-H2 v: 1.0 serial: <filter>
UEFI: American Megatrends v: 5.13 date: 04/27/2020
CPU: Topology: Quad Core model: Intel Celeron J4115 bits: 64 type: MCP arch: Goldmont Plus
family: 6 model-id: 7A (122) stepping: 1 microcode: 36 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 14284
Speed: 2437 MHz min/max: 800/2500 MHz Core speeds (MHz): 1: 2474 2: 2277 3: 2359
4: 2369
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:3185
Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics 600 (GLK 2) v: 4.6 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
driver: snd_hda_intel v: kernel bus ID: 00:0e.0 chip ID: 8086:3198
Sound Server: ALSA v: k5.10.0-8-amd64
Network: Device-1: Realtek RTL8125 2.5GbE driver: r8169 v: kernel port: e000 bus ID: 02:00.0
chip ID: 10ec:8125
IF: eth0 state: down mac: <filter>
Device-2: Realtek RTL8125 2.5GbE driver: r8169 v: kernel port: d000 bus ID: 03:00.0
chip ID: 10ec:8125
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Realtek RTL8811AU 802.11a/b/g/n/ac WLAN Adapter type: USB driver: rtl8812au
bus ID: 1-2:3 chip ID: 0bda:a811 serial: <filter>
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 238.47 GiB used: 5.96 GiB (2.5%)
ID-1: /dev/nvme0n1 model: Sabrent size: 238.47 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: RKT303.3 scheme: GPT
Partition: ID-1: / raw size: 41.43 GiB size: 40.49 GiB (97.71%) used: 5.96 GiB (14.7%) fs: ext4
dev: /dev/nvme0n1p2
ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/nvme0n1p3
Sensors: System Temperatures: cpu: 56.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
Info: Processes: 206 Uptime: 11m Memory: 7.60 GiB used: 832.6 MiB (10.7%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Wed Nov 10, 2021 6:29 am
by BasicSloth
SwampRabbit wrote: Tue Nov 09, 2021 7:26 pm
@BasicSloth when you say "SteamPlay" you're talking about playing Windows games off a remote Windows computer (asking cause you used the word "over" earlier) or that you are using Proton?
If I had to guess these games may need a specific version of Proton, if you know what you used wth MX-19, I would try that version. I don't think this a MX-21 AHS specific issue, but it would be nice to find out the issue with these games.
With SteamPlay i mean, i playing games over steam using proton. I don't think it's a MX-21 AHS problem either. I do think further discussions on that topic (those two games) don't belong in that thread. I will make a new one, as soon as I find a solution, which will make the games run.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Thu Nov 11, 2021 9:42 am
by razor2021
Finally installed the MX-21 AHS RC3 over my MX-19.4 AHS, and other than new learnings on a UEFI dual-boot system with Windows 10, it was so far great. Everything seems to be working well. However, I noticed in DMESG, there were some new errors specific to Bluetooth. What used to work for my Bluetooth headset in MX-19.4 (w/ kernel 5.10), is not working in MX-21 AHS RC3 (w/ kernel 5.14).
System Info:
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: ROG STRIX B450-F GAMING II v: Rev 1.xx serial: <filter>
UEFI: American Megatrends v: 4602 date: 08/17/2021
CPU: Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen family: 17 (23) model-id: 71 (113)
stepping: N/A microcode: 8701021 L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 115198
Speed: 3290 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2199 2: 3347 3: 2200 4: 2206 5: 2197
6: 2005 7: 2199 8: 2199 9: 2200 10: 2128 11: 2202 12: 2187 13: 2462 14: 2200 15: 2202 16: 2198
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: ASUSTeK driver: nvidia v: 470.63.01 bus ID: 09:00.0
chip ID: 10de:1c82
Display: x11 server: X.Org 1.20.13 driver: nvidia unloaded: fbdev,modesetting,nouveau,vesa alternate: nv
resolution: 1680x1050~60Hz, 3840x2160~60Hz
OpenGL: renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 470.63.01 direct render: Yes
Audio: Device-1: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 09:00.1
chip ID: 10de:0fb9
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 0c:00.4 chip ID: 1022:1487
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel port: d000 bus ID: 03:00.0
chip ID: 8086:1539
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: d000 bus ID: 06:00.0 chip ID: 8086:2723
IF: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 1.20 TiB used: 28.87 GiB (2.3%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB block size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 2B2QEXM7 scheme: GPT
ID-2: /dev/sda vendor: Western Digital model: WD3200KS-00PFB0 size: 298.09 GiB block size: physical: 512 B
logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: 0M21 scheme: MBR
Partition: ID-1: / raw size: 512.70 GiB size: 503.58 GiB (98.22%) used: 28.85 GiB (5.7%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) cache pressure: 100 (default)
dev: /dev/nvme0n1p5
Sensors: System Temperatures: cpu: 38.9 C mobo: N/A gpu: nvidia temp: 30 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 29%
Repos: Active apt repos in: /etc/apt/sources.list
1: deb https://www.bchemnet.com/suldr/ debian extra
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http://repository.spotify.com/ stable non-free
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb https://linux.teamviewer.com/deb/ stable main
Info: Processes: 361 Uptime: 11h 08m Memory: 62.71 GiB used: 2.95 GiB (4.7%) Init: SysVinit v: 2.96 runlevel: 5
default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in running in: quick-system-in inxi: 3.0.36
Code: Select all
$ lsusb | grep -i bluetooth
Bus 001 Device 005: ID 8087:0029 Intel Corp. AX200 Bluetooth
Code: Select all
$ lsmod | grep -i bt
btusb 65536 0
btrtl 28672 1 btusb
btbcm 20480 1 btusb
btintel 32768 1 btusb
bluetooth 757760 44 btrtl,btintel,btbcm,bnep,btusb,rfcomm
btrfs 1654784 0
zstd_compress 196608 1 btrfs
xor 24576 2 async_xor,btrfs
raid6_pq 122880 4 async_pq,btrfs,raid456,async_raid6_recov
libcrc32c 16384 4 nf_conntrack,btrfs,nf_tables,raid456
usbcore 331776 6 gspca_main,xhci_hcd,gspca_zc3xx,usbhid,btusb,xhci_pci
Code: Select all
$ dmesg | grep -i bluetooth
[ 5.101530] Bluetooth: Core ver 2.22
[ 5.101542] NET: Registered PF_BLUETOOTH protocol family
[ 5.101542] Bluetooth: HCI device and connection manager initialized
[ 5.101544] Bluetooth: HCI socket layer initialized
[ 5.101545] Bluetooth: L2CAP socket layer initialized
[ 5.101547] Bluetooth: SCO socket layer initialized
[ 5.107531] Bluetooth: hci0: Firmware revision 0.0 build 206 week 30 2021
[ 5.112825] bluetooth hci0: firmware: failed to load intel/ibt-20-0-0.sfi (-2)
[ 8.098833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.098836] Bluetooth: BNEP filters: protocol multicast
[ 8.098839] Bluetooth: BNEP socket layer initialized
[ 10.985605] Bluetooth: RFCOMM TTY layer initialized
[ 10.985612] Bluetooth: RFCOMM socket layer initialized
[ 10.985616] Bluetooth: RFCOMM ver 1.11
[28545.815544] Bluetooth: hci0: urb 0000000070f46ba0 submission failed (90)
[28545.815552] Bluetooth: hci0: sending frame failed (-90)
[28545.828652] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828659] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828662] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828672] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828674] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828676] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828678] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828680] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828682] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828684] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828686] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828687] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828688] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828690] Bluetooth: hci0: SCO packet for unknown connection handle 48
[28545.828692] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828693] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828695] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828696] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828698] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828699] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828701] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828702] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828703] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828705] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828706] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828708] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828709] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828711] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828712] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828714] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828715] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828717] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828718] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828720] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828721] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828723] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828724] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828725] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.828727] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838653] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838657] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838659] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838661] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838663] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28545.838671] Bluetooth: hci0: SCO packet for unknown connection handle 0
[28550.835717] Bluetooth: hci0: SCO packet for unknown connection handle 257
[28550.835724] Bluetooth: hci0: SCO packet for unknown connection handle 257
- Not sure if its caused by this --> "[ 5.112825] bluetooth hci0: firmware: failed to load intel/ibt-20-0-0.sfi (-2)". If so, how does one find this firmware?
or
Ques#2 - Is bluetooth itself broken on kernel 5.14 vs 5.10 for some bluetooth devices? If so, is there an easy way to downgrade kernel to 5.10 to check? Do I choose
kernels in
MX Package Installer, for
Debian 64 bit (5.10)?
Thanks for any info.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 12, 2021 11:06 am
by razor2021
Ok, I think I found the repository --> kernel/git/firmware/linux-firmware.git, and its not there (from the latest?). And I think its not due to the act its missing in Ques#1. I think its more related to Ques#2, a possible 5.14.x kernel issue. Hopefully, there is a newer patched kernel soon.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 12, 2021 11:25 am
by SwampRabbit
@razor2021 the firmware for the AX200 series has been in firmware-nonfree for quite a while now and seems to be updated with each release.
https://metadata.ftp-master.debian.org/ ... _changelog
Is the AX200 device a PCIe device, is it built into the motherboard, is it M.2?
I believe we had someone using a AX200 series from the AHS Beta or other RC threads. Have to go back and see those posts.
Hunting around a bit, I've found similar errors reported for both 5.14 kernel and btusb, some old and some new, might take a bit to narrow it down.
https://patches.linaro.org/project/linu ... gmail.com/
https://www.mail-archive.com/debian-bug ... 22096.html
We have recently updated the 5.14 kernel in MX Test Repo, you might want to look in MX Package Installer to make sure you have the latest in the mean time.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Fri Nov 12, 2021 12:46 pm
by razor2021
@SwampRabbit The AX200 is a PCIe device and takes a PCIe slot. I'll take a look into MX Test Repo. What should I be looking for in MX Test Repo? If I search for 'kernel', I am not sure which package I might be looking for, or am I looking at the wrong packages i.e. linux-config-5.14?
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 22, 2021 10:42 am
by davemx
I'm not testing this any more. I've removed the ahs-RC3 and installed the "vanilla" XFCE version and I can see no practical reason now to use the ahs, even though with the 19.x versions I could. Obviously, in both cases, that's perception rather than any measurable difference.
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 22, 2021 12:55 pm
by Gaer Boy
Installed RC3 over RC1 yesterday and repeated the install today because of a couple of issues which didn't occur on RC1.
I've rebooted about 20 times (because of problems with disk manager, now resolved I think) and three times the boot has failed at about 4 secs leaving a Busybox prompt. The first error message is
Code: Select all
Begin: Running /scripts/init-bottom... mount: mounting /dev on /root/dev failed: no such file or directory
and errors cascade from there. The next boot has been successful each time.
[EDIT] Realised I didn't post QSI
Code: Select all
System: Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64 root=/dev/sda5
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-21_ahs_rc3_x64 Wildflower October 25 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASRock model: FM2A88X-ITX+ serial: <filter>
UEFI: American Megatrends v: P2.10 date: 01/17/2014
Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K270 serial: <filter>
charge: 50% (should be ignored) rechargeable: yes status: N/A
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M185 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: AMD A8-6500 APU with Radeon HD Graphics bits: 64 type: MCP
arch: Piledriver family: 15 (21) model-id: 13 (19) stepping: 1 microcode: 6001119
L2 cache: 2048 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 27948
Speed: 1827 MHz min/max: 1700/3500 MHz boost: enabled Core speeds (MHz): 1: 1956
2: 2148 3: 1717 4: 1696
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Richland [Radeon HD 8570D] vendor: ASRock driver: radeon v: kernel
bus ID: 00:01.0 chip ID: 1002:990e
Display: x11 server: X.Org 1.20.13 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD ARUBA (DRM 2.50.0 / 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.3 Mesa 21.2.5 compat-v: 3.1 direct render: Yes
Audio: Device-1: AMD Trinity HDMI Audio vendor: ASRock driver: snd_hda_intel v: kernel
bus ID: 00:01.1 chip ID: 1002:9902
Device-2: AMD FCH Azalia vendor: ASRock driver: snd_hda_intel v: kernel
bus ID: 00:14.2 chip ID: 1022:780d
Sound Server: ALSA v: k5.14.0-3mx-amd64
Network: Device-1: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: AzureWave
driver: ath9k v: kernel port: f100 bus ID: 01:00.0 chip ID: 168c:0034
IF: wlan0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA8171 Gigabit Ethernet vendor: ASRock driver: alx
v: kernel port: e000 bus ID: 03:00.0 chip ID: 1969:10a1
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 2.05 TiB used: 179.37 GiB (8.6%)
ID-1: /dev/sda vendor: Samsung model: SSD 870 EVO 250GB size: 232.89 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1B6Q scheme: GPT
ID-2: /dev/sdb vendor: Seagate model: ST1000DM005 HD103SJ size: 931.51 GiB
block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm
serial: <filter> rev: 00E5 scheme: MBR
ID-3: /dev/sdc vendor: Toshiba model: HDWD110 size: 931.51 GiB block size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter>
rev: A8J0 scheme: MBR
Partition: ID-1: / raw size: 30.00 GiB size: 29.36 GiB (97.87%) used: 7.00 GiB (23.9%) fs: ext4
dev: /dev/sda5
ID-2: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sdb11
Sensors: System Temperatures: cpu: 17.5 C mobo: N/A gpu: radeon temp: 10 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 237 Uptime: 23m Memory: 6.71 GiB used: 1.05 GiB (15.7%) Init: SysVinit
v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
Re: MX-21 "ahs" (Xfce) RC3 feedback
Posted: Mon Nov 22, 2021 1:08 pm
by Eadwine Rose
AHS has been released:
official post.
Closing this topic.