Page 6 of 14
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 11:45 am
by dolphin_oracle
berlin59 wrote: Sun Jul 16, 2023 11:38 am
dolphin_oracle wrote: Sun Jul 16, 2023 8:53 am
berlin59 wrote: Sun Jul 16, 2023 3:47 am
Sorry, dolphin_oracle,
the latest RC2 fails to create the desired partition. It ends up like the RC2 and RC1 with:
Code: Select all
2023-07-16 09:37:39.462 DBG default: SErr #10: "Error: Partition(s) 1 on /dev/sdc have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes.\n"
I created the live-usb-stick with dd to test it.
We know that creating the usb-live-stick with the MX Live Usb-Maker in full mode results in successfull installation on UEFI-PC.
that's with the updated installer? I didn't update the iso, just the installer.
Code: Select all
sudo apt update && sudo apt install mx-installer
while running live.
I didn't know that I should update the installer in the live-session.
Sorry.
Since I have a working MX23 installation, I only create live-usb-sticks with the MX-tool to avoid such failures and misunderstandings.
no worries. we are getting ready to send up the better fix anyway.
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 1:08 pm
by doodstecsonhere
thinkpadx wrote: Sat Jul 15, 2023 12:17 pm
did not want to bug and PM someone about this dumb question. but if rc1 installed great and boots up on 2 laptops, and I DID upgrade both today; then i am good - yes? or NO? i should just not worry about it.i should be able to upgrade to final release when it happens...
sorry to waste a developers time on this. Have a good one!
I read the official blog posts from MX website of the RC2 and RC2 releases of MX 23. It was mentioned that updating the RC releases to final release is fully supported. Looks like you're all set to receive the final release when it comes automatically via updates.
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 2:13 pm
by 8bit
doodstecsonhere wrote: Sun Jul 16, 2023 1:08 pm
thinkpadx wrote: Sat Jul 15, 2023 12:17 pm
did not want to bug and PM someone about this dumb question. but if rc1 installed great and boots up on 2 laptops, and I DID upgrade both today; then i am good - yes? or NO? i should just not worry about it.i should be able to upgrade to final release when it happens...
sorry to waste a developers time on this. Have a good one!
I read the official blog posts from MX website of the RC2 and RC2 releases of MX 23. It was mentioned that updating the RC releases to final release is fully supported. Looks like you're all set to receive the final release when it comes automatically via updates.
With the exception that any apps added after R1, R2 will not be included in the upgrade. A small thing, but worth pointing out.
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 2:47 pm
by j2mcgreg
I upgraded the HP 15 to rc2 and the only glitch is that my headphones don't wok but the speaker works fine. I had the same problem with MX 21 and it was solved by installing the Liquorix 6.2.xxx kernel. I tried the same fix here, but there was no change.
Code: Select all
System:
Kernel: 6.3.9-1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
intel_pstate=disable hpet=disable rcupdate.rcu_expedited=1
BOOT_IMAGE=/boot/vmlinuz-6.3.9-1-liquorix-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_ahs_RC2_x64 Libretto July 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: HP product: HP Laptop 15-ef2xxx v: N/A serial: <superuser required> Chassis:
type: 10 serial: <superuser required>
Mobo: HP model: 887A v: 59.21 serial: <superuser required> UEFI: AMI v: F.27 date: 10/20/2022
Battery:
ID-1: BAT0 charge: 40.7 Wh (100.0%) condition: 40.7/40.7 Wh (100.0%) volts: 12.9 min: 11.3
model: HP Primary type: Li-ion serial: <filter> status: full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 3 5300U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23)
model-id: 0x68 (104) stepping: 1 microcode: 0x8608104
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1754 high: 2269 min/max: 1400/3900 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2214 2: 1411 3: 1995 4: 2269 5: 1522 6: 1732
7: 1495 8: 1400 bogomips: 41521
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Lucienne vendor: Hewlett-Packard driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:164c
class-ID: 0300 temp: 34.0 C
Device-2: Luxvisions Innotech HP TrueVision HD Camera type: USB driver: uvcvideo bus-ID: 1-3:2
chip-ID: 30c9:0013 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: AU Optronics 0x5799 built: 2021 res: 1920x1080 hz: 60
dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9
modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Graphics (renoir LLVM 15.0.6 DRM 3.52
6.3.9-1-liquorix-amd64) direct-render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.1
chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x,
snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie:
gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 03:00.6
chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.3.9-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter vendor: Hewlett-Packard
driver: rtw_8822ce v: N/A modules: rtw88_8822ce,wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: f000 bus-ID: 01:00.0 chip-ID: 10ec:c822 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:b00c
class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: d2e3 hci-v: 5.1 rev: cc6
Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 476.94 GiB used: 18.15 GiB (3.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: PC SN530 SDBPNPZ-512G-1006
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: HPS2 temp: 27.9 C scheme: GPT
Partition:
ID-1: / raw-size: 476.68 GiB size: 468.13 GiB (98.21%) used: 18.15 GiB (3.9%) fs: ext4
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 99 MiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A gpu: amdgpu temp: 33.0 C
Fan Speeds (RPM): fan-1: 0 fan-2: 0
Repos:
Packages: pm: dpkg pkgs: 2069 libs: 1049 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm ahs
Info:
Processes: 278 Uptime: 11m wakeups: 2270 Memory: 7.09 GiB used: 1.36 GiB (19.2%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 3:34 pm
by thinkpadx
well i am hoping i do not have to reinstalll - not a gripe - just tedious to do what i do. so far other testing the wacom tablet everything seems to be working. i hpe that alll app updates will be available. i tried to read a bunch of stuff but knowing as little as i know i am starting to get confused. not sure where my system stands into the future. last 2 versions upgraded with no issues from rc1 to final release. hence why i thought this should be smooth esp. from all of the reports and comments od the final testing stages.
:-)))
i AM pleased from what i am experienceing 'in toto'!!!
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Sun Jul 16, 2023 3:41 pm
by count-72-on-fingers
Hello
Installed to whole ssd via (updated) Ventoy, following download and sha256 check.
Installing and uninstalling .deb packages works. Installing Flatpak works. DVD playback with sound works. Correct erroneous behavior of touchpad works. Software update (green icon) worked. Looks good so far.
Well done to all involved, and thank you.
------------
Desktop: Xfce v: 4.18.1
Distro: MX-23_RC2_x64 Libretto July 15 2023 base: Debian GNU/Linux 12 (bookworm)
EliteBook 8570p, Intel Core i5-3320M
Boot Mode: BIOS
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Mon Jul 17, 2023 7:05 am
by OlafD
MX Tour translation (in german)
Jerry told me, when i was asking to help in translation, that MX Tour was already translated. Have RC2 installed, but MX Tour is only in english. He told me to pots it. I hope, this here is the right place.
Code: Select all
System:
Kernel: 6.1.0-10-amd64 [6.1.37-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_RC2_x64 Libretto July 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Virtualbox System: innotek GmbH product: VirtualBox v: 1.2 serial: <superuser required>
Chassis: Oracle Corporation type: 1 serial: <superuser required>
Mobo: Oracle model: VirtualBox v: 1.2 serial: <superuser required> UEFI: innotek GmbH
v: VirtualBox date: 12/01/2006
Battery:
ID-1: BAT0 charge: 50.5 Wh (101.0%) condition: 50.0/50.0 Wh (100.0%) volts: 10.0 min: 10.0
model: innotek 1 type: Unknown serial: N/A status: full
CPU:
Info: model: Intel Core i5-4278U bits: 64 arch: Haswell gen: core 4 level: v2 built: 2013-15
process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1 microcode: N/A
Topology: cpus: 1x cores: 1 smt: <unsupported> cache: L1: 64 KiB desc: d-1x32 KiB; i-1x32 KiB
L2: 256 KiB desc: 1x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): 2600 min/max: N/A core: 1: 2600 bogomips: 5199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.20.0.0 ports: active: Virtual-1
empty: Virtual-2, Virtual-3, Virtual-4, Virtual-5, Virtual-6, Virtual-7, Virtual-8
bus-ID: 00:02.0 chip-ID: 15ad:0405 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vmware
unloaded: fbdev,modesetting,vesa dri: vmwgfx gpu: vmwgfx display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1680x900 s-dpi: 96 s-size: 445x238mm (17.52x9.37") s-diag: 505mm (19.87")
Monitor-1: Virtual-1 mapped: Virtual1 res: 1680x900 hz: 60 size: N/A modes: max: 1680x900
min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: SVGA3D; build: RELEASE; LLVM; direct-render: Yes
Audio:
Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel bus-ID: 00:05.0
chip-ID: 8086:2415 class-ID: 0401
API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: c1a0 bus-ID: 00:03.0
chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A
modules: i2c_piix4 port: N/A bus-ID: 00:07.0 chip-ID: 8086:7113 class-ID: 0680
Drives:
Local Storage: total: 20 GiB used: 6.39 GiB (31.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: VirtualBox model: VBOX HARDDISK size: 20 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1.0 scheme: GPT
Partition:
ID-1: / raw-size: 19.74 GiB size: 19.26 GiB (97.58%) used: 6.39 GiB (33.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 99 MiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2065 libs: 1047 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
Processes: 171 Uptime: 0m wakeups: 11 Memory: 1.91 GiB used: 898.1 MiB (45.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Mon Jul 17, 2023 7:39 am
by dolphin_oracle
OlafD wrote: Mon Jul 17, 2023 7:05 am
MX Tour translation (in german)
Jerry told me, when i was asking to help in translation, that MX Tour was already translated. Have RC2 installed, but MX Tour is only in english. He told me to pots it. I hope, this here is the right place.
Code: Select all
System:
Kernel: 6.1.0-10-amd64 [6.1.37-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_RC2_x64 Libretto July 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Virtualbox System: innotek GmbH product: VirtualBox v: 1.2 serial: <superuser required>
Chassis: Oracle Corporation type: 1 serial: <superuser required>
Mobo: Oracle model: VirtualBox v: 1.2 serial: <superuser required> UEFI: innotek GmbH
v: VirtualBox date: 12/01/2006
Battery:
ID-1: BAT0 charge: 50.5 Wh (101.0%) condition: 50.0/50.0 Wh (100.0%) volts: 10.0 min: 10.0
model: innotek 1 type: Unknown serial: N/A status: full
CPU:
Info: model: Intel Core i5-4278U bits: 64 arch: Haswell gen: core 4 level: v2 built: 2013-15
process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1 microcode: N/A
Topology: cpus: 1x cores: 1 smt: <unsupported> cache: L1: 64 KiB desc: d-1x32 KiB; i-1x32 KiB
L2: 256 KiB desc: 1x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): 2600 min/max: N/A core: 1: 2600 bogomips: 5199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.20.0.0 ports: active: Virtual-1
empty: Virtual-2, Virtual-3, Virtual-4, Virtual-5, Virtual-6, Virtual-7, Virtual-8
bus-ID: 00:02.0 chip-ID: 15ad:0405 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vmware
unloaded: fbdev,modesetting,vesa dri: vmwgfx gpu: vmwgfx display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1680x900 s-dpi: 96 s-size: 445x238mm (17.52x9.37") s-diag: 505mm (19.87")
Monitor-1: Virtual-1 mapped: Virtual1 res: 1680x900 hz: 60 size: N/A modes: max: 1680x900
min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: SVGA3D; build: RELEASE; LLVM; direct-render: Yes
Audio:
Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel bus-ID: 00:05.0
chip-ID: 8086:2415 class-ID: 0401
API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: c1a0 bus-ID: 00:03.0
chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A
modules: i2c_piix4 port: N/A bus-ID: 00:07.0 chip-ID: 8086:7113 class-ID: 0680
Drives:
Local Storage: total: 20 GiB used: 6.39 GiB (31.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: VirtualBox model: VBOX HARDDISK size: 20 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1.0 scheme: GPT
Partition:
ID-1: / raw-size: 19.74 GiB size: 19.26 GiB (97.58%) used: 6.39 GiB (33.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 99 MiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2065 libs: 1047 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
Processes: 171 Uptime: 0m wakeups: 11 Memory: 1.91 GiB used: 898.1 MiB (45.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
tour does not yet support translation. it will in the future, but not at the moment. The original author left the project, so this one is behind.
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Mon Jul 17, 2023 7:40 am
by fehlix
OlafD wrote: Mon Jul 17, 2023 7:05 am
MX Tour translation (in german)
Jerry told me, when i was asking to help in translation, that MX Tour was already translated. Have RC2 installed, but MX Tour is only in english. He told me to pots it. I hope, this here is the right place.
Does the English text makes sense to you? If so please get a transifex account - if not already done so -
and be ready to submit the translated German text on transifex. The English text for MX Tour will be shortly available and transifex for translation.
Thanks
Re: MX-23 RC2 (Xfce) feedback thread
Posted: Mon Jul 17, 2023 8:26 am
by thomasl
Not a problem with 23 as such, just a short note for those who work with a frugal
and encrypted install. MX23 will boot into an unencrypted frugal install with my usual boot incantation for the kernel but won't once moved into the encrypted partition. In my case I had to change the boot incantation from
Code: Select all
quiet loglevel=0 persist=root!,home! bdir=MXL blab=WinsysPart
to
Code: Select all
quiet loglevel=0 persist=root!,home! bdir=MX23 from=hd
ie replacing the blab= with a from=.
Other than that so far MX23 seems to be work
. There are a couple niggles but I am still investigating and if I can't find a solution will post further messages.