Page 6 of 23
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 11:07 am
by Gerson
It happens to me that if I have files in the /home partition and I cut to paste them in my backup partition, I get a message saying: "Access denied to /media/Files/..." (see image) However the action is fulfilled, but they are still grayed out in /home (second image). If I change directory, when I come back; they have already been deleted from the sending folder and are still in the destination folder. The annoying thing is the message that appears and the gray color of the files, otherwise the files are changed and are not damaged. (third image)
Translated with
www.DeepL.com/Translator (free version)
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 11:43 am
by Richard
The Print key works fine on T430 but I was left staring at the Ksnip?
Tried New and it became a Screen capture app.
Obviously, been a long time since I used KDE.
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 12:28 pm
by MadmanRB
Yeah I have been getting that auto reconnect bug, how odd.
Its too bad it can't get fixed without manual intervention, it's not a terrible issue nor a dealbreaker, but still very strange it can't get fixed by the MX team at this point (shrugs)
I am not complaining mind you, but I never had this issue with other KDE distros that use sudo.
It even works with sparkylinux's recent release, maybe the MX devs could see what they did to circumnavigate this?
Not saying sparky is better mind you, but when i gave it a spin with its recent Sparky 6.0 “Po Tolo” release it auto reconnected.
Since I am no developer or coder I have no idea how they fixed it but it is worth investigating since sparkylinux 6.0 and MX21 share the same debian bullseye base.
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:11 pm
by sthras
Hello i am new in this Forum!
I am not sure if it is there by default but although i created a root user during the installation process i have only one administrator user the user i created as normal user!
In KDE settings i ve tried to create a new root user but is impossible! No error at all!
Thanks in advance
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:14 pm
by MadmanRB
sthras wrote: Fri Oct 08, 2021 1:11 pm
Hello i am new in this Forum!
I am not sure if it is there by default but although i created a root user during the installation process i have only one administrator user the user i created as normal user!
In KDE settings i ve tried to create a new root user but is impossible! No error at all!
Thanks in advance
I think you posted in the wrong sub forum there matey.
Are you using MX 19?
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:22 pm
by sthras
No MX-21 KDE/plasma RC1
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:31 pm
by sthras
In /etc/passwd there is a root user but kde use only as administrator the normal user i have already created!
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:45 pm
by MadmanRB
okay then, did you enable sudo?
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:48 pm
by richb
Re missing shutdown icon in menu
Needless to say I don't see this behavior either in Live or Installed...
Neither do I.
Re: MX-21 KDE/plasma RC1 feedback
Posted: Fri Oct 08, 2021 1:50 pm
by Arnox
dolphin_oracle wrote: Fri Oct 08, 2021 7:07 am
Arnox wrote: Fri Oct 08, 2021 6:34 am
davemx wrote: Thu Oct 07, 2021 6:31 pm
Flatpaks not working in the KDE RC1. I installed Freetube from there in the Beta version so I know it used to work on my computer.
On that note, it seems some packages are missing from the MX Package Installer. Notably Steam (can be installed via the Popular Applications tab though) and VeraCrypt. Synaptic's not installed either, though I'm not sure if that's intended or not. Doing an apt-get install for VeraCrypt also results in it finding nothing.
By the way, no, I didn't touch the default respositories.
Code: Select all
System:
Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64
compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64
root=UUID=<filter> ro splash
init=/lib/systemd/systemd
Desktop: KDE Plasma 5.20.5 wm: kwin_x11 dm: SDDM
Distro: MX-21_KDE_RC1_x64 Wildflower October 5 2021
base: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x
serial: <filter> UEFI: American Megatrends v: 2802 date: 10/22/2020
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M510
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: Discharging
CPU:
Topology: 6-Core model: AMD Ryzen 5 3600XT bits: 64 type: MT MCP
arch: Zen family: 17 (23) model-id: 71 (113) stepping: N/A
microcode: 8701021 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 91034
Speed: 2106 MHz min/max: 2200/3800 MHz boost: enabled
Core speeds (MHz): 1: 2106 2: 2508 3: 2259 4: 2067 5: 2146 6: 2140
7: 2281 8: 2133 9: 2053 10: 2303 11: 2119 12: 2232
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU104GL [Quadro RTX 4000] driver: nvidia v: 470.63.01
bus ID: 09:00.0 chip ID: 10de:1eb1
Display: x11 server: X.Org 1.20.13 driver: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv
compositor: kwin_x11 resolution: 1920x1080~60Hz
OpenGL: renderer: Quadro RTX 4000/PCIe/SSE2 v: 4.6.0 NVIDIA 470.63.01
direct render: Yes
Audio:
Device-1: NVIDIA TU104 HD Audio driver: snd_hda_intel v: kernel
bus ID: 09:00.1 chip ID: 10de:10f8
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 0b:00.4 chip ID: 1022:1487
Device-3: Cubeternet Live Streaming USB Device type: USB
driver: snd-usb-audio,uvcvideo bus ID: 2-1:2 chip ID: 1e4e:7102
serial: <filter>
Sound Server: ALSA v: k5.10.0-8-amd64
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb
v: kernel port: f000 bus ID: 05:00.0 chip ID: 8086:1539
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.93 TiB used: 11.72 GiB (0.6%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB
size: 931.51 GiB block size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 2B2QEXM7 scheme: GPT
ID-2: /dev/sda vendor: Western Digital model: WD10EZEX-08WN4A0
size: 931.51 GiB block size: physical: 4096 B logical: 512 B
speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: 1A01
temp: 41 C scheme: MBR
ID-3: /dev/sdb vendor: Kingston model: SUV400S37120G size: 111.79 GiB
block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: 96R9 temp: 37 C scheme: GPT
Partition:
ID-1: / raw size: 105.91 GiB size: 103.69 GiB (97.90%)
used: 11.72 GiB (11.3%) fs: ext4 dev: /dev/sdb2
ID-2: swap-1 size: 5.62 GiB used: 0 KiB (0.0%) fs: swap
swappiness: 15 (default 60) cache pressure: 100 (default)
dev: /dev/sdb3
Sensors:
System Temperatures: cpu: 63.8 C mobo: N/A gpu: nvidia temp: 50 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 30%
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://la.mxrepo.com/mx/repo/ bullseye ahs
Info:
Processes: 275 Uptime: 1h 13m Memory: 15.60 GiB used: 2.15 GiB (13.8%)
Init: systemd v: 247 runlevel: 5 default: 5 Compilers: gcc: 10.2.1
alt: 10 Shell: quick-system-in running in: quick-system-in
inxi: 3.0.36
Steam in Debian is a 32 bit package and sometimes gets filtered out by default. Try installing steam:i386
Assuming that is the issue, how can I remove that 32 bit filter? (By the way, I did get Steam installed already with the Popular Applications tab.) Also, VeraCrypt is not listed in the Flatpaks tab either.
In any case, the really good news though is that MX21 is working super beautifully for me. the missing packages seem to be the only problem. 21 even fixed a minor issue of KDE desktop screen tearing I was experiencing before with 19.4.