MX 21/3 error with MX Snapshot

Help for Current Versions of MX
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Message
Author
rod178
Posts: 38
Joined: Mon Nov 15, 2021 11:38 am

Re: MX 21/3 error with MX Snapshot

#41 Post by rod178 »

Adrian
I do not remember getting multiple root prompts
Still to download and install the .deb file
I suspect that the issue is with the exclusion list.
Previously my old exclusion list was carried over to new version of MX Snapshot, now not so.
Later I will try copying a pre November copy of my exclusion list
ie pre November MX21.3 Snapshot to the lateset MX21.3 live system
Cannot see /home/Rod/ in the exclusion list

Follows is requested output

Code: Select all

# This file is written by xdg-user-dirs-update
# If you want to change or add directories, just edit the line you're
# interested in. All local changes will be retained on the next run.
# Format is XDG_xxx_DIR="$HOME/yyy", where yyy is a shell-escaped
# homedir-relative path, or XDG_xxx_DIR="/yyy", where /yyy is an
# absolute path. No other format is supported.
# 
XDG_DESKTOP_DIR="$HOME/Desktop"
XDG_DOWNLOAD_DIR="$HOME/Downloads"
XDG_TEMPLATES_DIR="$HOME/Templates"
XDG_PUBLICSHARE_DIR="$HOME/Public"
XDG_DOCUMENTS_DIR="$HOME/Documents"
XDG_MUSIC_DIR="$HOME/Music"
XDG_PICTURES_DIR="$HOME/Pictures"
XDG_VIDEOS_DIR="$HOME/Videos"

Code: Select all

#=======  /etc/mx-snapshot-exclude.list  ======
# rsync excludes file for mx-snapshot
# version 15.2.20

# Do NOT edit this entry block unless you know what you are doing
.bind-root
.config
.fehbg
lost+found
swapfile
tmp
tmpdir
dev/*
cdrom/*
live/*
media/*
mnt/*
sys/*
proc/*
run/*
boot/grub/!(themes|unicode.pf2)
etc/adjtime
etc/bcm-ckd
etc/blkid.tab.old
etc/defaultdomain
etc/crypttab
etc/fstab.backup
etc/ioctl.save
etc/live/protect
etc/machine-id
etc/mailname
etc/mtab
etc/udev/rules.d/70-persistent-cd.rules
etc/udev/rules.d/70-persistent-net.rules
etc/resolv.conf
etc/volkeys/*
home/timeshift/snapshots
home/snapshot
home/*/.config/MX-Linux/xdg_check
root/.bash_history
root/.cache
root/.local/share/mc/history
root/.local/share/recently-used.xbel
root/.local/share/Trash/*
root/.dbus
root/.gconf
root/.gnome2
root/.lesshst
root/.Trash*
root/.sudo_as_admin_successful
root/.xsession-errors*
root/keyfile
timeshift/snapshots
var/cache/apt/archives/*.deb
var/cache/apt/archives/partial/*
var/cache/apt-xapian-index/index.*
var/cache/apt-show-versions/*
var/cache/apt/*.bin
var/cache/apt/apt-file/*
var/cache/debconf/*-old
var/cache/lightdm
var/cache/samba/browse.dat
var/lib/apt/lists/*
var/lib/apt/periodic/*
var/lib/dbus/machine-id
var/lib/dhcp/*
var/lib/dpkg/*-old
var/lib/lightdm/.cache
var/lib/lightdm/.Xauthority
var/lib/NetworkManager/*
var/lib/nfs/rpc_pipefs/*
var/lib/sudo/*
var/lib/udisks/*
var/lib/urandom/*
var/log/!(apache2|samba|clamav)
var/log/clamav/*
var/log/samba/*
var/mail/*
var/spool/mail/*
var/spool/anacron/*
var/tmp/*
var/cache/brightness-settings-cache/*

# Entries below this can be edited by the user. If you have any large
# files or directories, you should exclude them from being copied
# by adding them to this list.

home/*/.cache/mozilla/firefox/*/cache2/*
home/*/.cache/mozilla/firefox/*/thumbnails/*
home/*/.cache/librewolf/*/cache2/*
home/*/.cache/librewolf/*/thumbnails/*
home/*/.cache/thumbnails/*
home/*/.cache/vivaldi/Default/Cache/*
home/*/.mozilla/firefox/*/Cache/*
home/*/.mozilla/firefox/*/cache2/*
home/*/.mozilla/seamonkey/*/Cache/*
home/*/.adobe
home/*/.dbus
home/*/.keyfileDONOTdelete
home/*/.macromedia
home/*/.sudo_as_admin_successful
home/*/.thumbnails/*
home/*/.Trash*
home/*/.local/share/Trash/*
# home/*/.cache
home/*/.gvfs
home/*/.bash_history
home/*/.lesshst
home/*/.recently-used
home/*/.recently-used.xbel
home/*/.local/share/recently-used.xbel
home/*/.local/share/mc/history
home/*/.xsession-errors*
home/*/.xfce4-session.verbose-log*

# Examples:
# home/*/Desktop/*
# home/*/Downloads/*
# home/*/Music/*
# home/*/Pictures/*
# home/*/Videos/*


# Other possible exclusions
# usr/share/doc/*


# To exclude all hidden files and directories in your home, uncomment
# the next line. You will lose custom desktop configs if you do.
# home/*/.[a-z,A-Z,0-9]*

# This stops any video drivers from loading - safe option.
etc/X11/xorg.conf
etc/X11/xorg.conf.d/20-nvidia.conf
etc/X11/xorg.conf.d/20-intel.conf
etc/X11/xorg.conf.d/20-radeon.conf
etc/X11/xorg.conf.d/20-amd.conf

User avatar
Fornhamfred
Posts: 309
Joined: Sun May 02, 2010 12:49 pm

Re: MX 21/3 error with MX Snapshot

#42 Post by Fornhamfred »

Another problem with MX-Snapshot.

Code: Select all

[CODE]Snapshot created on: 20220115_1229
System:    Kernel: 5.10.0-26-amd64 [5.10.197-1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-26-amd64 root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower October 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASUSTeK model: P8Z68-V LX v: Rev X.0x serial: <filter> 
           UEFI: American Megatrends v: 0703 date: 10/21/2011 
CPU:       Info: Quad Core model: Intel Core i5-2500K bits: 64 type: MCP arch: Sandy Bridge 
           family: 6 model-id: 2A (42) stepping: 7 microcode: 2F cache: L2: 6 MiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26487 
           Speed: 1774 MHz min/max: 1600/3700 MHz Core speeds (MHz): 1: 1774 2: 1683 3: 1711 
           4: 1908 
           Vulnerabilities: Type: gather_data_sampling status: Not affected 
           Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_rstack_overflow status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled, 
           RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Turks XT [Radeon HD 6670/7670] vendor: Hightech Information System 
           driver: radeon v: kernel bus-ID: 01:00.0 chip-ID: 1002:6758 class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: 
           loaded: ati,radeon unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1360x768 s-dpi: 96 s-size: 359x203mm (14.1x8.0") 
           s-diag: 412mm (16.2") 
           Monitor-1: VGA-0 res: 1360x768 hz: 60 dpi: 85 size: 406x229mm (16.0x9.0") 
           diag: 466mm (18.4") 
           OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 5.10.0-26-amd64 LLVM 11.0.1) 
           v: 3.3 Mesa 20.3.5 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403 
           Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
           vendor: Hightech Information System driver: snd_hda_intel v: kernel bus-ID: 01:00.1 
           chip-ID: 1002:aa90 class-ID: 0403 
           Device-3: Tenx USB AUDIO type: USB driver: hid-generic,snd-usb-audio,usbhid 
           bus-ID: 3-1.6:5 chip-ID: 1130:1620 class-ID: 0300 
           Sound Server-1: ALSA v: k5.10.0-26-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel port: d000 
           bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 2.04 TiB used: 202.55 GiB (9.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G size: 223.57 GiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> 
           rev: B1D1 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DL003-9VT166 size: 1.82 TiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5900 
           serial: <filter> rev: CC32 scheme: MBR 
Partition: ID-1: / raw-size: 30.27 GiB size: 29.63 GiB (97.87%) used: 11.75 GiB (39.7%) fs: ext4 
           dev: /dev/sda7 maj-min: 8:7 
           ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%) used: 391 KiB (0.4%) fs: vfat 
           dev: /dev/sda1 maj-min: 8:1 
           ID-3: /home raw-size: 50.78 GiB size: 49.68 GiB (97.84%) used: 20.89 GiB (42.0%) 
           fs: ext4 dev: /dev/sda8 maj-min: 8:8 
Swap:      Alert: No swap data was found. 
Sensors:   System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 38.5 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2278 lib: 1168 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/megasync.list 
           1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_11/ ./
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Info:      Processes: 240 Uptime: 56m wakeups: 1 Memory: 3.81 GiB used: 1.62 GiB (42.5%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: UEFI
[/code]

Never had any problem before today could not create destination file. No such file or directory.
Error message:
Could not create linuxfs file-please check whether you have enough space on destination partition.
Space is 631GB

User avatar
j2mcgreg
Global Moderator
Posts: 6857
Joined: Tue Oct 23, 2007 12:04 pm

Re: MX 21/3 error with MX Snapshot

#43 Post by j2mcgreg »

Your lack of a swap partition is cause for concern. There are a lot of folks touting the idea that with enough ram available you can forgo creating a swap partition or file, but the reality is that some applications still expect it to be there (even though it may never be used) and can give unpridictable results when swap space is not present. The good news is that you can add a swap file at any time and here’s how:

https://www.digitalocean.com/community/ ... -debian-11
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.

User avatar
Adrian
Developer
Posts: 8987
Joined: Wed Jul 12, 2006 1:42 am

Re: MX 21/3 error with MX Snapshot

#44 Post by Adrian »

Fornhamfred wrote: Fri Nov 17, 2023 2:44 pm Another problem with MX-Snapshot.
Never had any problem before today could not create destination file. No such file or directory.
Error message:
Could not create linuxfs file-please check whether you have enough space on destination partition.
Space is 631GB
That message is a bit of catch-all, I cannot really examine what the actually problem is, and I cannot display the message because it can be in many formats and lengths so I just use the most common problem -- but if space is not the issue, it's time to examine the logs. Also without log I have no clue what version you are reporting about.

User avatar
dolphin_oracle
Developer
Posts: 22294
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX 21/3 error with MX Snapshot

#45 Post by dolphin_oracle »

log file should be under /var/log/mx-snapshot, and present in quick-system-info log viewer as well.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.

thebookkeeper

Re: MX 21/3 error with MX Snapshot

#46 Post by thebookkeeper »

Fornhamfred wrote: Fri Nov 17, 2023 2:44 pm...
Error message:
Could not create linuxfs file ...
The predecessor of version-23.11.02 on Github had this error message, I was too impatient with Github.

My mx-snapshot_23.11.03 works fine, you can see my new log file below.
You do not have the required permissions to view the files attached to this post.

rod178
Posts: 38
Joined: Mon Nov 15, 2021 11:38 am

Re: MX 21/3 error with MX Snapshot

#47 Post by rod178 »

Adrian wrote: Fri Nov 17, 2023 2:59 am I think I fixed it, please try this last .deb: https://github.com/MX-Linux/mx-snapshot ... _amd64.deb
If this doesn't fix it, I still need the info that I requested in the previous post.

BTW, do you guys on Bullseye get multiple root prompts when the snapshot finishes or this happens only on my testing machine?
Adrian

Today I performed the latest MX Update (MX21.3 Xfce), included in which is MX Snapshot 23.11.02
Happy to report that everything now seems to be working fine.
Created a Live USB from the Snapshot and everything seems to be intact

PS the root prompt is now (once only) on the second page. From memory it was previously on initiation

User avatar
Adrian
Developer
Posts: 8987
Joined: Wed Jul 12, 2006 1:42 am

Re: MX 21/3 error with MX Snapshot

#48 Post by Adrian »

Thanks for testing and for the reports. I think now it should be pretty stable, won't push new updates for a while, sorry for the bugs I introduced but I think it's all for the better in the long term.

rod178
Posts: 38
Joined: Mon Nov 15, 2021 11:38 am

Re: MX 21/3 error with MX Snapshot

#49 Post by rod178 »

Adrian wrote: Sat Nov 18, 2023 1:02 am Thanks for testing and for the reports. I think now it should be pretty stable, won't push new updates for a while, sorry for the bugs I introduced but I think it's all for the better in the long term.
Thanks for your attention to this matter, I noted that you have been the MX Snapshot Dev since late 2014.

Was the issue due to the Unification?
Is MX Snapshots MX21.3 still Unified with MX23 ?

User avatar
Fornhamfred
Posts: 309
Joined: Sun May 02, 2010 12:49 pm

Re: MX 21/3 error with MX Snapshot

#50 Post by Fornhamfred »

dolphin_oracle wrote: Fri Nov 17, 2023 3:22 pm log file should be under /var/log/mx-snapshot, and present in quick-system-info log viewer as well.

Code: Select all

/var/log/mx-snapshot.log

Code: Select all

Snapshot created on: 20220115_1229
System:    Kernel: 5.10.0-26-amd64 [5.10.197-1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-26-amd64 root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower October 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASUSTeK model: P8Z68-V LX v: Rev X.0x serial: <filter> 
           UEFI: American Megatrends v: 0703 date: 10/21/2011 
CPU:       Info: Quad Core model: Intel Core i5-2500K bits: 64 type: MCP arch: Sandy Bridge 
           family: 6 model-id: 2A (42) stepping: 7 microcode: 2F cache: L2: 6 MiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26484 
           Speed: 1753 MHz min/max: 1600/3700 MHz Core speeds (MHz): 1: 1753 2: 1805 3: 1741 
           4: 1714 
           Vulnerabilities: Type: gather_data_sampling status: Not affected 
           Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_rstack_overflow status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled, 
           RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Turks XT [Radeon HD 6670/7670] vendor: Hightech Information System 
           driver: radeon v: kernel bus-ID: 01:00.0 chip-ID: 1002:6758 class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: 
           loaded: ati,radeon unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1360x768 s-dpi: 96 s-size: 359x203mm (14.1x8.0") 
           s-diag: 412mm (16.2") 
           Monitor-1: VGA-0 res: 1360x768 hz: 60 dpi: 85 size: 406x229mm (16.0x9.0") 
           diag: 466mm (18.4") 
           OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 5.10.0-26-amd64 LLVM 11.0.1) 
           v: 3.3 Mesa 20.3.5 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403 
           Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
           vendor: Hightech Information System driver: snd_hda_intel v: kernel bus-ID: 01:00.1 
           chip-ID: 1002:aa90 class-ID: 0403 
           Device-3: Tenx USB AUDIO type: USB driver: hid-generic,snd-usb-audio,usbhid 
           bus-ID: 3-1.6:5 chip-ID: 1130:1620 class-ID: 0300 
           Sound Server-1: ALSA v: k5.10.0-26-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel port: d000 
           bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 2.04 TiB used: 206.52 GiB (9.9%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G size: 223.57 GiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> 
           rev: B1D1 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DL003-9VT166 size: 1.82 TiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5900 
           serial: <filter> rev: CC32 scheme: MBR 
Partition: ID-1: / raw-size: 30.27 GiB size: 29.63 GiB (97.87%) used: 15.75 GiB (53.2%) fs: ext4 
           dev: /dev/sda7 maj-min: 8:7 
           ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%) used: 391 KiB (0.4%) fs: vfat 
           dev: /dev/sda1 maj-min: 8:1 
           ID-3: /home raw-size: 50.78 GiB size: 49.68 GiB (97.84%) used: 20.89 GiB (42.1%) 
           fs: ext4 dev: /dev/sda8 maj-min: 8:8 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile 
Sensors:   System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 38.0 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2278 lib: 1168 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/megasync.list 
           1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_11/ ./
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Info:      Processes: 245 Uptime: 11m wakeups: 1 Memory: 3.81 GiB used: 1.75 GiB (45.8%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: UEFI

Post Reply

Return to “MX Help”