Page 1 of 1
MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 8:28 am
by dolphin_oracle
This thread is for feedback and issue reports MX-23 beta 1, any flavor.
Be sure to include the
quick-system-info with your report.
If posting nvidia-installer (ddm-mx) issues, please post the contents of /var/log/ddm.log.
If posting remaster issues, please include the contents of /var/log/live/live-remaster.log
If posting installer issues, please include the contents of /var/log/minstall.log
If posting issues with MX-PackageInstaller “Popular Apps”, please post contents of /var/log/mxpi.log or /var/log/mxpi.log.old (whichever contains the log of your issue).
if posting about an application, please be specific on what application.
Original blog post here
https://mxlinux.org/blog/mx-23-libretto ... -purposes/
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 8:59 am
by BV206
I put the xfce .iso on a Ventoy USB. I got as far as the boot menus. I changed the time zone and when I tried to boot I got:
Fatal error
could not find file antiX/linuxfs
It might be a Ventoy problem. Booting the .iso from VirtualBox worked nromally.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:12 am
by chrispop99
MX-23 Xfce 32-bit.
Code: Select all
System:
Kernel: 6.1.0-9-686-pae [6.1.27-1] arch: i686 bits: 32 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-686-pae
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_386 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Portable System: Dell product: Latitude D610 v: N/A serial: <superuser required> Chassis:
type: 8 serial: <superuser required>
Mobo: Dell model: N/A serial: <superuser required> BIOS: Dell v: A06 date: 10/02/2005
Battery:
ID-1: BAT0 charge: 45.7 Wh (100.0%) condition: 45.7/48.8 Wh (93.6%) volts: 12.4 min: 11.1
model: Sony DELL 00 type: Li-ion serial: <filter> status: charging
CPU:
Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm family: 6
model-id: 0xD (13) stepping: 8 microcode: 0x20
Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
Speed (MHz): 800 min/max: 800/1733 scaling: driver: acpi-cpufreq governor: ondemand core:
1: 800 bogomips: 3458
Flags: nx pae sse sse2
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD RV370/M22 [Mobility Radeon X300] vendor: Dell driver: radeon v: kernel
alternate: radeonfb,amdgpu arch: Rage-9 code: Radeon IGP process: TSMC 110nm built: 2003-08 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1 empty: DVI-D-1,SVIDEO-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:5460 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: r300 gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99") s-diag: 338mm (13.3")
Monitor-1: LVDS-1 mapped: LVDS res: 1024x768 hz: 60 size: N/A modes: max: 1024x768 min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: ATI RV370 direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio vendor: Dell Latitude D610 Laptop
driver: snd_intel8x0 v: kernel bus-ID: 00:1e.2 chip-ID: 8086:266e class-ID: 0401
API: ALSA v: k6.1.0-9-686-pae status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Dell Latitude D610
driver: tg3 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0
chip-ID: 14e4:1677 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq
modules: wl bus-ID: 03:03.0 chip-ID: 8086:4220 class-ID: 0280
IF: eth1 state: up mac: <filter>
Bluetooth:
Device-1: Dell Wireless 350 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-1:2
chip-ID: 413c:8103 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 1.1 lmp-v: 1.2
sub-v: 679 hci-v: 1.2 rev: 679
Info: acl-mtu: 384:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 30.76 GiB used: 8.15 GiB (26.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS32GPSD330 size: 29.82 GiB block-size:
physical: 512 B logical: 512 B speed: <unknown> type: SSD serial: <filter> rev: 0121 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Kingston model: DataTraveler 2.0 size: 962 MiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 29.81 GiB size: 29.17 GiB (97.87%) used: 7.36 GiB (25.2%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 2.5 MiB (0.2%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3112
Repos:
Packages: pm: dpkg pkgs: 2025 libs: 1026 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 181 Uptime: 4h 13m wakeups: 2 Memory: 1.96 GiB used: 907.2 MiB (45.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
When attempting to play an MPG video file, VLC opens then crashes. (Works with SMPlayer, works on 64-bit)
Chris
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:17 am
by chrispop99
MX-23, FluxBox, 64-bit.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Gigabyte product: N/A v: N/A serial: <superuser required> Chassis: type: 3
serial: <superuser required>
Mobo: Gigabyte model: Z77P-D3 v: x.x serial: <superuser required> BIOS: American Megatrends
v: F8e date: 11/21/2012
CPU:
Info: model: Intel Core i3-3220 bits: 64 type: MT MCP arch: Ivy Bridge gen: core 3 level: v2
built: 2012-15 process: Intel 22nm family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1600 high: 1602 min/max: 1600/3300 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1600 2: 1600 3: 1602 4: 1600 bogomips: 26425
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] vendor: ASUSTeK driver: nouveau v: kernel non-free:
series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Fermi 2 code: GF119/GK208
process: TSMC 28nm built: 2010-16 pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max: gen: 3
speed: 8 GT/s ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:128b
class-ID: 0300 temp: 44.0 C
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: modesetting unloaded: fbdev,vesa
dri: nouveau gpu: nouveau display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: EIZO NANAO EV2451 serial: <filter> built: 2021
res: 1920x1080 hz: 60 dpi: 92 gamma: 1.2 size: 528x297mm (20.79x11.69") diag: 606mm (23.9")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.3 Mesa 22.3.6 renderer: NV106 direct-render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Gigabyte 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
Device-2: NVIDIA GK208 HDMI/DP Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:0e0f
class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.13 TiB used: 8.54 GiB (0.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD110 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A8J0
scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: A-Data model: SU630 size: 223.57 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 710b scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Kingston model: DataTraveler 2.0 size: 962 MiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 223.56 GiB size: 218.99 GiB (97.96%) used: 8.54 GiB (3.9%) fs: ext4
dev: /dev/sdb1 maj-min: 8:17
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 25.0 C mobo: N/A gpu: nouveau temp: 44.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 1822 libs: 907 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 187 Uptime: 4h 23m wakeups: 1 Memory: 7.72 GiB used: 930.3 MiB (11.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Both Strawberry and DeadBeef are included. Is this intentional?
Chris
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:24 am
by dolphin_oracle
BV206 wrote: ↑Sun May 28, 2023 8:59 am
I put the xfce .iso on a Ventoy USB. I got as far as the boot menus. I changed the time zone and when I tried to boot I got:
Fatal error
could not find file antiX/linuxfs
It might be a Ventoy problem. Booting the .iso from VirtualBox worked nromally.
this is due to the way ventoy identifies the mx iso. due to changes in systemd, we had to rename a file that ventoy happens to use to ID MX and antiX. we've sent a patch to the ventoy devs, but they have not incorporated it into a new release yet.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:55 am
by Jerry3904
chrispop99 wrote: ↑Sun May 28, 2023 9:17 am
MX-23, FluxBox, 64-bit.
Both Strawberry and DeadBeef are included. Is this intentional?
Chris
Not my intention, thanks.
@m_pav @dolphin_oracle Strawberry should be left out of MX Fluxbox following general OS concept.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 10:36 am
by ceeslans
Here are some initial remarks re MX-Fluxbox beta1
Error messages in ~/.xsession-errors
----------------
Fluxbox is logging a long list of '
Failed to read: session.*' values in ~/.session-errors.
Solution
Add these variables to ~/.fluxbox/init as suggested by @siamhie
Code: Select all
session.screen0.struts: 0,0,0,0
session.screen0.struts.1: 0,0,0,0
session.screen0.iconbar.iconifiedPattern: Relative
There is a warning re
language locale: "Warning: Failed to open file(fluxbox.cat). For translation, using default messages."
This can be resolved by executing following commands:
Code: Select all
cd /usr/share/fluxbox/nls
sudo ln -is en_US.UTF-8 $(locale | grep LANG | cut -d= -f2)
Also seeing following warning in ~/.xsession/errors (probably also fluxbox-related):
Code: Select all
WARNING: More than one Desktop window found:
0x 1200036 3
0x 1200021 3
0x 1200008 3
Tried to google for possible causes/solutions, but didn't find any....
And finally various (harmless?) messages:
- rtkit- and libcamera related errors after pipewire startup
- xfce4-clipman errors
~/.fluxbox/apps
-------------
Suggest to reduce the number of entries to installed applications only. And clean out double/incomplete entries.
Default dock (wmalauncher)
-------------
Default dock is NOT showing up on session start. following errors appear (one by one) in ~/.xsession.errors
Code: Select all
--background-color: Argument '<COLOR|GRADIENT>' is missing.
--border-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-background-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-border-color: Argument '<COLOR|GRADIENT>' is missing.
These arguments could instead be added to the TTIPS+ items
Also, mxdk script is missing a sed command, something like:
Code: Select all
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: LeftCenter/' $HOME/.fluxbox/init
Presumably mx-dockmaker has not been updated yet to set the above?
mxfb-font
-------------
Not yet updated to 230526 version?
As it is now, selecting the gtk-font does not execute the requested change.
mxfb-appfinder
-------------
Some applications show up without icon:
- MX apps: Background/Font/MX-User-Manual/Tint2-Manager
- non MX : Grsync/Py-Loader
Perhaps set
fallback-icon option in ~/.config/rofi/themes/appfinder/mxfb-appfinder.rasi:
Code: Select all
application-fallback-icon: "/usr/share/icons/Papirus/symbolic/mimetypes/application-x-executable-symbolic.svg";
-------------
Needs to be updated to allow (additional?) setting of *.svg icons and width/height
tint2
------------
Launching mxfb-appfinder from default tint2 looks great (though perhaps a bit oversized).
But calling mxfb-appfinder from elsewhere-positioned and/or otherwise-colored/transparent panel should open mxfb-appfinder (or an alternative rofi appfinder) in a neutral position --> centered ??
sort order folders-first
------------
When searching files/folders in e.g texteditors, preferably show folders-first before files :
Code: Select all
open dconf editor --> org --> gtk --> settings --> file-chooser
scroll down to 'sort-directories-first --> set Custom value to: True
Then hit the clock icon in top-right corner and select 'Apply'
EDIT: Sorry
@Eadwine Rose , here's the obligatory QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: Sony product: VPCF23P1E v: C609XFKA serial: <superuser required> Chassis:
type: 10 serial: <superuser required>
Mobo: Sony model: VAIO serial: <superuser required> BIOS: American Megatrends v: R2150V3
date: 07/22/2011
Battery:
ID-1: BAT0 charge: 38.9 Wh (100.0%) condition: 38.9/57.2 Wh (68.0%) volts: N/A min: 123.1
model: Sony Corp. type: Li-ion serial: N/A status: full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M315/M235 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-2670QM bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 895 high: 1000 min/max: 800/3100 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 898 2: 882 3: 1000 4: 900 5: 837 6: 878 7: 831 8: 934
bogomips: 35119
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GF108M [GeForce GT 540M] vendor: Sony driver: nouveau v: kernel non-free:
series: 390.xx+ status: legacy-active (EOL~late 2022) arch: Fermi code: GF1xx process: 40/28nm
built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 16 ports: active: LVDS-1 empty: HDMI-A-1,VGA-1
bus-ID: 01:00.0 chip-ID: 10de:0df4 class-ID: 0300 temp: 47.0 C
Device-2: Ricoh USB2.0 Camera type: USB driver: uvcvideo bus-ID: 3-1.2:3 chip-ID: 05ca:18c0
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: Picom v: 9.1 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: LVDS-1 model: Chi Mei Opto 0x1600 built: 2011 res: 1920x1080 hz: 60 dpi: 130
gamma: 1.2 size: 374x192mm (14.72x7.56") diag: 420mm (16.6") modes: max: 1920x1080 min: 640x350
API: OpenGL v: 4.3 Mesa 22.3.6 renderer: NVC1 direct-render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Sony 6
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
Device-2: NVIDIA GF108 High Definition Audio vendor: Sony driver: snd_hda_intel v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0bea class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Foxconn Unex DHXA-225
driver: ath9k v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0
chip-ID: 168c:0032 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Sony driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 9000 bus-ID: 05:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 252.42 GiB used: 16.6 GiB (6.6%)
ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra size: 14.53 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
SMART Message: Unable to run smartctl. Root privileges required.
ID-2: /dev/sdb maj-min: 8:16 vendor: Kingfast model: N/A size: 223.57 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk model: Ultra size: 14.32 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 14.52 GiB size: 14.19 GiB (97.73%) used: 7.7 GiB (54.3%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 47.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 1825 libs: 908 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://nl.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 240 Uptime: 4h 6m wakeups: 67 Memory: 5.77 GiB used: 1.32 GiB (23.0%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 10:39 am
by Eadwine Rose
QSI please, thanks!
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:05 am
by rbeltz48
Your installer is still dated, confusing and difficult to use. Why not switch to the user-friendly Calamares installer which is available on other distros including Debian? I have used it many times and it's a pleasure to work with.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:11 am
by j2mcgreg
64 bit XFCE
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Acer product: Aspire V5-571 v: V1.12 serial: <superuser required>
Mobo: Acer model: Aspire V5-571 v: V1.12 serial: <superuser required> UEFI: Phoenix v: 1.12
date: 06/12/2012
Battery:
ID-1: BAT0 charge: 25.9 Wh (97.0%) condition: 26.7/37.0 Wh (72.1%) volts: 17.1 min: 14.8
model: SANYO AL12A32 type: Li-ion serial: <filter> status: not charging
Device-1: hidpp_battery_1 model: Logitech Wireless Mouse M325 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-2367M bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 873 high: 900 min/max: 800/1400 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 862 2: 894 3: 838 4: 900 bogomips: 11174
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Acer Incorporated ALI driver: i915 v: kernel arch: Gen-6 code: Sandybridge
process: Intel 32nm built: 2011 ports: active: LVDS-1 empty: DP-1,HDMI-A-1,VGA-1
bus-ID: 00:02.0 chip-ID: 8086:0116 class-ID: 0300
Device-2: Chicony HD WebCam type: USB driver: uvcvideo bus-ID: 2-4:2 chip-ID: 04f2:b336
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: LVDS-1 model: LG Display 0x030a built: 2010 res: 1366x768 hz: 60 dpi: 101 gamma: 1.2
size: 345x194mm (13.58x7.64") diag: 396mm (15.6") ratio: 16:9 modes: 1366x768
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 3000 (SNB GT2)
direct-render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Acer Incorporated ALI 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.2
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: Lite-On driver: ath9k
v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 168c:0034
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 10.13 GiB (2.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WDS500G2B0A-00SM50 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 20WD
scheme: GPT
Partition:
ID-1: / raw-size: 465.5 GiB size: 457.13 GiB (98.20%) used: 10.13 GiB (2.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2034 libs: 1033 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 227 Uptime: 1m wakeups: 6 Memory: 7.55 GiB used: 1.2 GiB (15.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
The only quirk I have found so far is that on this laptop if the mouse receiver is not plugged into the third usb slot (from the front), you will be stuck in a reboot loop. With MX 21, only inserting the mouse receiver into the first (of three) usb ports caused this behaviour. Now both the first and second usb ports are affected.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:14 am
by anticapitalista
rbeltz48 wrote: ↑Sun May 28, 2023 11:05 am
Your installer is still dated, confusing and difficult to use. Why not switch to the user-friendly Calamares installer which is available on other distros including Debian? I have used it many times and it's a pleasure to work with.
Why don't you tell us exactly why our installer is confusing and dated?
I have used the MX/antiX installer many times and it's a pleasure to use and very customisable compared to calamares.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:23 am
by MadMax
Agreed here. The MX installer is one of the better installers out there imo and has more options than a stock calamares installer.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:52 am
by Adrian
Calamares, from what I understand, also doesn't work well with our Live system. It's for installing ISO images, not live systems which would make actually things less flexible. In MX if you install or remove a program the installer will install your changes, it's not so on other distros that use Calamares which can be confusing.
People who talk about "outdated" are mostly talking about looks and while the installer is not flashy, it has the normal buttons and looks that go back to years of computing the code itself is just fine and up-to-date. If you are all about the looks I guess you could get a turd put something flashy on it and call it modern.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 12:05 pm
by Eadwine Rose
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 12:11 pm
by Melber
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Here are some initial remarks re MX-Fluxbox beta1
...
Default dock (wmalauncher)
-------------
Default dock is NOT showing up on session start. following errors appear (one by one) in ~/.xsession.errors
Code: Select all
--background-color: Argument '<COLOR|GRADIENT>' is missing.
--border-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-background-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-border-color: Argument '<COLOR|GRADIENT>' is missing.
These arguments could instead be added to the TTIPS+ items
Also, mxdk script is missing a sed command...
Can confirm.
DefaultDock.mkdk isn't right.
- pkill wmalauncher command is missing
- Hex colour definitions need to be quoted, otherwise they are being read as comments.
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Also, mxdk script is missing a sed command...
?? sed command is there and working for me
To fix replace contents of
~/.fluxbox/scripts/DefaultDock.mxdk with this
Code: Select all
#!/bin/bash
pkill wmalauncher
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: TopLeft/' $HOME/.fluxbox/init
fluxbox-remote reconfigure; sleep 1
# TOOLTIPS
TTIPS+=" --tooltip-show-delay 250"
TTIPS+=" --tooltip-text-padding 3"
TTIPS+=" --tooltip-border-size 3"
TTIPS+=" --tooltip-foreground-color #ffffff"
TTIPS+=" --tooltip-background-color #1d2324"
#commands for dock launchers
wmalauncher --desktop-file mx-tools.desktop --tooltip-text "MX Tools" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
wmalauncher --desktop-file custom-toolbox-mxfb.desktop --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 --tooltip-text "Settings manager" $TTIPS & sleep 0.1
wmalauncher --desktop-file mxfb-help.desktop --tooltip-text "Help" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 12:31 pm
by siamhie
As
@ceeslans mentioned struts and iconifiedPattern are still present but I'm getting a slew of new init errors in my .xsession-errors log.
I thought it might be a fluke on initial startup so I deleted the file and rebooted but they all came back.
This is due to double keybinding for same action
Code: Select all
Keys: Invalid key/modifier on line 59): Control Mod1 Bksp :Exit
The struts and iconifiedPattern has a solution mentioned. (comment #7)
Code: Select all
Failed to read: session.screen0.struts
Setting default value
Failed to read: session.screen0.struts.1
Setting default value
Failed to read: session.screen0.iconbar.iconifiedPattern
Setting default value
These are new.
Code: Select all
Failed to read: session.menuSearch
Setting default value
Failed to read: session.menuSearch
Setting default value
Failed to read: session.screen0.opaqueResize
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontal
Setting default value
Failed to read: session.screen0.workspacewarpingvertical
Setting default value
Failed to read: session.screen0.edgeResizeSnapThreshold
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontaloffset
Setting default value
Failed to read: session.screen0.workspacewarpingverticaloffset
Setting default value
Failed to read: session.screen0.opaqueResizeDelay
Setting default value
Failed to read: session.menuSearch
Setting default value
Failed to read: session.screen0.opaqueResize
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontal
Setting default value
Failed to read: session.screen0.workspacewarpingvertical
Setting default value
Failed to read: session.screen0.edgeResizeSnapThreshold
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontaloffset
Setting default value
Failed to read: session.screen0.workspacewarpingverticaloffset
Setting default value
Failed to read: session.screen0.opaqueResizeDelay
Setting default value
Failed to read: session.screen0.slit.autoRaise
Setting default value
Failed to read: session.screen0.toolbar.autoRaise
Setting default value
Also getting pipewire messages (not sure about these as sound works just fine)
Code: Select all
start pipewire
M 08:58:51.780472 mod.rt ../src/modules/module-rt.c:274:pw_rtkit_check_xdg_portal: Can't find org.freedesktop.portal.Desktop. Is xdg-desktop-portal running?
M 08:58:51.780508 mod.rt ../src/modules/module-rt.c:1035:pipewire__module_init: found session bus but no portal
M 08:58:51.781290 mod.rt ../src/modules/module-rt.c:290:translate_error: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
M 08:58:51.781354 mod.rt ../src/modules/module-rt.c:655:set_nice: could not set nice-level to -11: No such file or directory
M 08:58:51.781631 mod.rt ../src/modules/module-rt.c:290:translate_error: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
M 08:58:51.782581 mod.rt ../src/modules/module-rt.c:290:translate_error: RTKit error: org.freedesktop.DBus.Error.ServiceUnknown
M 08:58:51.795265 wp-device ../lib/wp/device.c:619:wp_spa_device_new_from_spa_factory: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed?
M 08:58:51.795275 script/libcamera libcamera.lua:168:chunk: PipeWire's libcamera SPA missing or broken. libcamera not supported.
This is a stock install with updates applied and Librewolf installed only. I have not done anything else yet.
QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2380 high: 2804 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2688 2: 2802 3: 2475 4: 1915 5: 2199 6: 2200
7: 2200 8: 2200 9: 2804 10: 2799 11: 2804 12: 2200 13: 2200 14: 2200 15: 2200 16: 2200
bogomips: 124799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, audio, telephony
Drives:
Local Storage: total: 8.19 TiB used: 876.42 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 43.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 40.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 6.13 GiB (6.2%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 38.1 C mobo: N/A gpu: amdgpu temp: 52.0 C mem: 56.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1299
Repos:
Packages: pm: dpkg pkgs: 1823 libs: 908 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 332 Uptime: 19m wakeups: 2 Memory: 31.27 GiB used: 1.91 GiB (6.1%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 12:40 pm
by Jerry3904
Melber wrote: ↑Sun May 28, 2023 12:11 pm
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Here are some initial remarks re MX-Fluxbox beta1
...
Default dock (wmalauncher)
-------------
Default dock is NOT showing up on session start. following errors appear (one by one) in ~/.xsession.errors
Code: Select all
--background-color: Argument '<COLOR|GRADIENT>' is missing.
--border-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-background-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-border-color: Argument '<COLOR|GRADIENT>' is missing.
These arguments could instead be added to the TTIPS+ items
Also, mxdk script is missing a sed command...
Can confirm.
DefaultDock.mkdk isn't right.
- pkill wmalauncher command is missing
- Hex colour definitions need to be quoted, otherwise they are being read as comments. Let's flag
@Adrian so he sees this.
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Also, mxdk script is missing a sed command...
?? sed command is there and working for me
To fix replace contents of
~/.fluxbox/scripts/DefaultDock.mxdk with this
Code: Select all
#!/bin/bash
pkill wmalauncher
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: TopLeft/' $HOME/.fluxbox/init
fluxbox-remote reconfigure; sleep 1
# TOOLTIPS
TTIPS+=" --tooltip-show-delay 250"
TTIPS+=" --tooltip-text-padding 3"
TTIPS+=" --tooltip-border-size 3"
TTIPS+=" --tooltip-foreground-color #ffffff"
TTIPS+=" --tooltip-background-color #1d2324"
#commands for dock launchers
wmalauncher --desktop-file mx-tools.desktop --tooltip-text "MX Tools" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
wmalauncher --desktop-file custom-toolbox-mxfb.desktop --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 --tooltip-text "Settings manager" $TTIPS & sleep 0.1
wmalauncher --desktop-file mxfb-help.desktop --tooltip-text "Help" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
Thanks. I saw that yesterday but didn't have time to chase it out.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 12:44 pm
by Joseph DeGarmo
When testing MX-23 KDE beta in a virtual machine, logging out and starting a new session causes the audio source to drop out. Only rebooting fixes it. Issue occurs on systemd as well and happens on both X11 and Wayland. Is this a VirtualBox issue or does this occur on physical hardware as well? I never have this issue when testing Debian 12 RC KDE and Q4OS 5 testing. And of course, I don't have this issue on my Fedora 37 KDE production machine when Pipewire is used.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 1:09 pm
by siamhie
Code: Select all
Failed to read: session.menuSearch
Setting default value
Failed to read: session.menuSearch
Setting default value
Failed to read: session.screen0.opaqueResize
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontal
Setting default value
Failed to read: session.screen0.workspacewarpingvertical
Setting default value
Failed to read: session.screen0.edgeResizeSnapThreshold
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontaloffset
Setting default value
Failed to read: session.screen0.workspacewarpingverticaloffset
Setting default value
Failed to read: session.screen0.opaqueResizeDelay
Setting default value
Failed to read: session.menuSearch
Setting default value
Failed to read: session.screen0.opaqueResize
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontal
Setting default value
Failed to read: session.screen0.workspacewarpingvertical
Setting default value
Failed to read: session.screen0.edgeResizeSnapThreshold
Setting default value
Failed to read: session.screen0.workspacewarpinghorizontaloffset
Setting default value
Failed to read: session.screen0.workspacewarpingverticaloffset
Setting default value
Failed to read: session.screen0.opaqueResizeDelay
Setting default value
Failed to read: session.screen0.slit.autoRaise
Setting default value
Failed to read: session.screen0.toolbar.autoRaise
Setting default value
Seems I got rid of those new init messages. On initial boot-up I was set to the MX-comfort style, so I set it to MX-comfort-dark then deleted the .xsessions-error file and after a reboot those entries disappeared.
I then set it back to MX-comfort, deleted the .xsessions-error file once again and rebooted and now they don't show up anymore.
MX-23-b1 fluxbox (QSI in post #16)
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 2:19 pm
by dolphin_oracle
chrispop99 wrote: ↑Sun May 28, 2023 9:12 am
MX-23 Xfce 32-bit.
Code: Select all
System:
Kernel: 6.1.0-9-686-pae [6.1.27-1] arch: i686 bits: 32 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-686-pae
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_386 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Portable System: Dell product: Latitude D610 v: N/A serial: <superuser required> Chassis:
type: 8 serial: <superuser required>
Mobo: Dell model: N/A serial: <superuser required> BIOS: Dell v: A06 date: 10/02/2005
Battery:
ID-1: BAT0 charge: 45.7 Wh (100.0%) condition: 45.7/48.8 Wh (93.6%) volts: 12.4 min: 11.1
model: Sony DELL 00 type: Li-ion serial: <filter> status: charging
CPU:
Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm family: 6
model-id: 0xD (13) stepping: 8 microcode: 0x20
Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
Speed (MHz): 800 min/max: 800/1733 scaling: driver: acpi-cpufreq governor: ondemand core:
1: 800 bogomips: 3458
Flags: nx pae sse sse2
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD RV370/M22 [Mobility Radeon X300] vendor: Dell driver: radeon v: kernel
alternate: radeonfb,amdgpu arch: Rage-9 code: Radeon IGP process: TSMC 110nm built: 2003-08 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1 empty: DVI-D-1,SVIDEO-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:5460 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: r300 gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99") s-diag: 338mm (13.3")
Monitor-1: LVDS-1 mapped: LVDS res: 1024x768 hz: 60 size: N/A modes: max: 1024x768 min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: ATI RV370 direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio vendor: Dell Latitude D610 Laptop
driver: snd_intel8x0 v: kernel bus-ID: 00:1e.2 chip-ID: 8086:266e class-ID: 0401
API: ALSA v: k6.1.0-9-686-pae status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Dell Latitude D610
driver: tg3 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0
chip-ID: 14e4:1677 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq
modules: wl bus-ID: 03:03.0 chip-ID: 8086:4220 class-ID: 0280
IF: eth1 state: up mac: <filter>
Bluetooth:
Device-1: Dell Wireless 350 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-1:2
chip-ID: 413c:8103 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 1.1 lmp-v: 1.2
sub-v: 679 hci-v: 1.2 rev: 679
Info: acl-mtu: 384:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 30.76 GiB used: 8.15 GiB (26.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS32GPSD330 size: 29.82 GiB block-size:
physical: 512 B logical: 512 B speed: <unknown> type: SSD serial: <filter> rev: 0121 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Kingston model: DataTraveler 2.0 size: 962 MiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 29.81 GiB size: 29.17 GiB (97.87%) used: 7.36 GiB (25.2%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 2.5 MiB (0.2%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3112
Repos:
Packages: pm: dpkg pkgs: 2025 libs: 1026 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 181 Uptime: 4h 13m wakeups: 2 Memory: 1.96 GiB used: 907.2 MiB (45.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
When attempting to play an MPG video file, VLC opens then crashes. (Works with SMPlayer, works on 64-bit)
Chris
I'm actually having trouble playing videos in any player. will investigate thanks.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 2:50 pm
by 8bit
anticapitalista wrote: ↑Sun May 28, 2023 11:14 am
Why don't you tell us exactly why our installer is confusing...?
The drive selection is not the easiest to figure out. Many people I've helped have stumbled here.
I find it wonderfully geeky.
viewtopic.php?p=697539#p697539
Please use those images and text in any way that helps.
8bit
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 4:21 pm
by Jerry3904
Fluxbox: we've lost the MX-Comfort theme as default for the monitors (gkrellm) again. Don't think I changed anything, but I'll go back and look.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 4:35 pm
by cmoswizard
Failure to boot on old Core 2 quad Q9000 in HP HDX18 laptop.
Boots to Grub menu and then:
Repeating message:
......Watchdog: BUG: Soft lockup - CPU#2 stuck for -- seconds ........
MX 21 worked.
Debian based Q4OS 5 using kernel 6.1 gives the same error.
Tested with Endeavour on kernel 6.2.2 and boots ok so probably a kernel 6.1 or Debian bug for this system.
FYI.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 4:35 pm
by FullScale4Me
MX Fluxbox 23 Beta1 Virtual Box 800x600 - an attempt to replicate an older laptop.
MX Tweek
when launched has multiple areas where items are fully cut-off (1st 2 items in left column) or partially displayed (including Apply button)
MX Updater
In toolbar has the (red) "pulse" as its icon. The next two dialogs of update notification and applying updates has the (green) "wireframe" icon. (consistency)
Samba sharing
Samba is installed by default and set to autostart. I created a Samba share and attempted to connect to it. Below is the resulting error.
Code: Select all
mike@optiplex7050:~
$ smbclient -L 192.168.x.xxx
do_connect: Connection to 192.168.x.xxx failed (Error NT_STATUS_IO_TIMEOUT)
In investigating I found that the User Fire Wall aka UFW was set
ON but no Samba rule was configured. Once the pre-configured Samba rule was searched for ("samba") and added the connection then worked fine.
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Virtualbox System: innotek GmbH product: VirtualBox v: 1.2 serial: <superuser required>
Chassis: Oracle Corporation type: 1 serial: <superuser required>
Mobo: Oracle model: VirtualBox v: 1.2 serial: <superuser required> UEFI: innotek GmbH
v: VirtualBox date: 12/01/2006
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MCP arch: Kaby Lake gen: core 7 level: v2
built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9 microcode: N/A
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 512 KiB desc: 2x256 KiB L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 bogomips: 14399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT Host state unknown
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT Host state unknown
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Unknown: Dependent on hypervisor status
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.20.0.0 ports: active: Virtual-1
empty: Virtual-2, Virtual-3, Virtual-4, Virtual-5, Virtual-6, Virtual-7, Virtual-8
bus-ID: 00:02.0 chip-ID: 15ad:0405 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: vmware
unloaded: fbdev,modesetting,vesa dri: vmwgfx gpu: vmwgfx display-ID: :0 screens: 1
Screen-1: 0 s-res: 800x600 s-dpi: 96 s-size: 212x159mm (8.35x6.26") s-diag: 265mm (10.43")
Monitor-1: Virtual-1 mapped: Virtual1 res: 800x600 hz: 60 size: N/A modes: max: 800x600
min: 640x480
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: SVGA3D; build: RELEASE; LLVM; direct-render: Yes
Audio:
Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel bus-ID: 00:05.0
chip-ID: 8086:2415 class-ID: 0401
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: c1a0 bus-ID: 00:03.0
chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A
modules: i2c_piix4 port: N/A bus-ID: 00:07.0 chip-ID: 8086:7113 class-ID: 0680
Drives:
Local Storage: total: 20 GiB used: 7.27 GiB (36.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: VirtualBox model: VBOX HARDDISK size: 20 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 1.0 scheme: GPT
Partition:
ID-1: / raw-size: 19.74 GiB size: 19.26 GiB (97.58%) used: 7.27 GiB (37.8%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 1822 libs: 907 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 178 Uptime: 7m wakeups: 168 Memory: 3.81 GiB used: 856.4 MiB (22.0%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 5:06 pm
by Jerry3904
800x600 resolution, huh? Did you try rootMenu > Display to make adjustments? If you try and it works better, click the Disply > Help to see how to make it permanent.
MX Updater
In toolbar has the (red) "pulse" as its icon. The next two dialogs of update notification and applying updates has the (green) "wireframe" icon. (consistency)
That is hard for me to understand: it is pulse white/red by default. If you log out/in is the pulse restored?
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 5:20 pm
by fehlix
FullScale4Me wrote: ↑Sun May 28, 2023 4:35 pm
MX Fluxbox 23 Beta1 Virtual Box 800x600 - an attempt to replicate an older laptop.
MX Updater
In toolbar has the (red) "pulse" as its icon. The next two dialogs of update notification and applying updates has the (green) "wireframe" icon. (consistency)
Yes, that's by design. Changing the tray-icon e.g. within MX-Updater preferences would only change the icon shown within the tray, not with in any other places like menu, notification popup or in any dialog-window.
This is not related to MX Fluxbox but works with Xfce and KDE the same.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 5:21 pm
by FullScale4Me
Jerry3904 wrote: ↑Sun May 28, 2023 5:06 pm
800x600 resolution, huh? Did you try rootMenu > Display to make adjustments? If you try and it works better, click the Display > Help to see how to make it permanent.
MX Updater
In toolbar has the (red) "pulse" as its icon. The next two dialogs of update notification and applying updates has the (green) "wireframe" icon. (consistency)
That is hard for me to understand: it is pulse white/red by default. If you log out/in is the pulse restored?
MX Tweak - My intent was to replicate the very first laptops had two resolutions: 640x480 and 800x600. I understand your point.
MX Updater When the system checks for updates at the end of the check a small pop-up "You have Updates" - it has a green "wireframe" icon not the red "pulse".
You click to apply updates.
The apply updates box comes up (the one with the check boxes) and it also has the green "wireframe" icon.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 5:23 pm
by Jerry3904
So you're talking about a couple of window icons -- got it.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 6:17 pm
by FullScale4Me
MX KDE 23 Beta1
Samba sharing
Samba is installed by default and set to autostart. In Dolphin I created a Samba share and failed in my attempt to connect to it. Below is the resulting error in terminal.
Code: Select all
mike@optiplex7050:~
$ smbclient -L 192.168.x.xxx
do_connect: Connection to 192.168.x.xxx failed (Error NT_STATUS_IO_TIMEOUT)
In investigating I found that the KDE Firewall was set
Firewall status (check) Enabled but no Samba rule was configured.
I clicked "Add Rule..." The pre-configured Samba rule was searched for ("samba") and before clicking "create" I changed the "Policy" to "Allow". Clicking "Create" the firewall applet gave an red error bar ("!Please restart plasma firewall, the backend disconnected."). I "X'd out" of this "Create" dialog and no rule was added. Se below.
Help button results in "Documentation not Found" displayed. I cleared the Enable check box in the Firewall applet and was able to connect to the share.
The UFW GUI applet is not present, only this KDE one.
I was able to install the "gufw" applet via MXPI. With the firewall enabled, samba rule in place I can successfully connect to the share from another PC.
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma v: 5.27.2 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Virtualbox System: innotek GmbH product: VirtualBox v: 1.2 serial: <superuser required>
Chassis: Oracle Corporation type: 1 serial: <superuser required>
Mobo: Oracle model: VirtualBox v: 1.2 serial: <superuser required> UEFI: innotek GmbH
v: VirtualBox date: 12/01/2006
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MCP arch: Kaby Lake gen: core 7 level: v2
built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9 microcode: N/A
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 512 KiB desc: 2x256 KiB L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 bogomips: 14399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT Host state unknown
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT Host state unknown
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Unknown: Dependent on hypervisor status
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter vendor: VMware
driver: vboxvideo v: kernel ports: active: VGA-1 empty: none bus-ID: 00:02.0 chip-ID: 80ee:beef
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting
unloaded: fbdev,vesa alternate: vboxvideo dri: swrast gpu: vboxvideo display-ID: :0 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 97 s-size: 269x202mm (10.59x7.95") s-diag: 336mm (13.24")
Monitor-1: VGA-1 model: VBOX monitor serial: <filter> built: 1990 res: 1024x768 hz: 60
gamma: 1.2 size: N/A modes: max: 800x600 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel bus-ID: 00:05.0
chip-ID: 8086:2415 class-ID: 0401
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: c1a0 bus-ID: 00:03.0
chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A
modules: i2c_piix4 port: N/A bus-ID: 00:07.0 chip-ID: 8086:7113 class-ID: 0680
Drives:
Local Storage: total: 26 GiB used: 9.82 GiB (37.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: VirtualBox model: VBOX HARDDISK size: 26 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 1.0 scheme: GPT
Partition:
ID-1: / raw-size: 25.74 GiB size: 25.17 GiB (97.78%) used: 9.82 GiB (39.0%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2401 libs: 1319 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm ahs
Info:
Processes: 169 Uptime: 35m wakeups: 610 Memory: 3.81 GiB used: 1.36 GiB (35.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 6:20 pm
by kobaian
MXFB-Font does not work well. Selecting font for GTK does not work at all, for Fluxbox it is impossible to change the font to any non-regular style (bold, italic etc.) Are you sure this is the last version of the script from pre-Beta? (BTW - The "about" button with some information about the version of the app will be helpful.)
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 6:42 pm
by siamhie
Is the firewall going to be enabled by default for fluxbox? I spent an hour and three different versions of emby server trying to get my Roku devices to connect to my computer only to find out the firewall was enabled. (wasn't like that for alpha2 or all versions of 21)
Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
cursors.jpg
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 6:47 pm
by dolphin_oracle
siamhie wrote: ↑Sun May 28, 2023 6:42 pm
Is the firewall going to be enabled by default for fluxbox? I spent an hour and three different versions of emby server trying to get my Roku devices to connect to my computer only to find out the firewall was enabled. (wasn't like that for alpha2 or all versions of 21)
Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
cursors.jpg
for now firewall is enabled by default on all versions of MX as of beta1.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 6:52 pm
by Melber
kobaian wrote: ↑Sun May 28, 2023 6:20 pm
MXFB-Font does not work well. Selecting font for GTK does not work at all, for Fluxbox it is impossible to change the font to any non-regular style (bold, italic etc.) Are you sure this is the last version of the script from pre-Beta? (BTW - The "about" button with some information about the version of the app will be helpful.)
Looks like the last version didn't make it into the beta - have to wait for the next update of mxfb-accessories.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 7:01 pm
by FullScale4Me
Jerry3904 wrote: ↑Sun May 28, 2023 5:23 pm
So you're talking about a couple of window icons -- got it.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 7:09 pm
by Melber
Jerry3904 wrote: ↑Sun May 28, 2023 4:21 pm
Fluxbox: we've lost the MX-Comfort theme as default for the monitors (gkrellm) again. Don't think I changed anything, but I'll go back and look.
Yep, noticed this too.
The first line of
~/.gkrellm/theme_config should be just
instead of the current
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 7:14 pm
by Jerry3904
I guess I never changed it...? Hmmm: but it was working on a2
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 7:44 pm
by richb
No MX Updater in KDE version?
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 7:56 pm
by danielson
And only one task switcher option in KDE?
See there are possibilities to install others, but just sayin'
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 8:50 pm
by siamhie
dolphin_oracle wrote: ↑Sun May 28, 2023 6:47 pm
siamhie wrote: ↑Sun May 28, 2023 6:42 pm
Is the firewall going to be enabled by default for fluxbox? I spent an hour and three different versions of emby server trying to get my Roku devices to connect to my computer only to find out the firewall was enabled. (wasn't like that for alpha2 or all versions of 21)
for now firewall is enabled by default on all versions of MX as of beta1.
@dolphin_oracle Thanks. I'll take a closer look at it and see if it will allow connections based applications.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:20 pm
by dolphin_oracle
richb wrote: ↑Sun May 28, 2023 7:44 pm
No MX Updater in KDE version?
Never had been
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:54 pm
by richb
dolphin_oracle wrote: ↑Sun May 28, 2023 9:20 pm
richb wrote: ↑Sun May 28, 2023 7:44 pm
No MX Updater in KDE version?
Never had been
Hmmm. Somehow i got it in MX 21 KDE. I do not remember how.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:56 pm
by dolphin_oracle
richb wrote: ↑Sun May 28, 2023 9:54 pm
dolphin_oracle wrote: ↑Sun May 28, 2023 9:20 pm
richb wrote: ↑Sun May 28, 2023 7:44 pm
No MX Updater in KDE version?
Never had been
Hmmm. Somehow i got it in MX 21 KDE. I do not remember how.
its easily installable.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 9:58 pm
by richb
Must have been through synaptic.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 10:01 pm
by dolphin_oracle
chrispop99 wrote: ↑Sun May 28, 2023 9:12 am
MX-23 Xfce 32-bit.
Code: Select all
System:
Kernel: 6.1.0-9-686-pae [6.1.27-1] arch: i686 bits: 32 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-686-pae
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_386 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Portable System: Dell product: Latitude D610 v: N/A serial: <superuser required> Chassis:
type: 8 serial: <superuser required>
Mobo: Dell model: N/A serial: <superuser required> BIOS: Dell v: A06 date: 10/02/2005
Battery:
ID-1: BAT0 charge: 45.7 Wh (100.0%) condition: 45.7/48.8 Wh (93.6%) volts: 12.4 min: 11.1
model: Sony DELL 00 type: Li-ion serial: <filter> status: charging
CPU:
Info: model: Intel Pentium M bits: 32 arch: M Dothan built: 2003-05 process: Intel 90nm family: 6
model-id: 0xD (13) stepping: 8 microcode: 0x20
Topology: cpus: 1x cores: 1 smt: <unsupported> cache: 2 MiB note: check
Speed (MHz): 800 min/max: 800/1733 scaling: driver: acpi-cpufreq governor: ondemand core:
1: 800 bogomips: 3458
Flags: nx pae sse sse2
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD RV370/M22 [Mobility Radeon X300] vendor: Dell driver: radeon v: kernel
alternate: radeonfb,amdgpu arch: Rage-9 code: Radeon IGP process: TSMC 110nm built: 2003-08 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1 empty: DVI-D-1,SVIDEO-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:5460 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: r300 gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99") s-diag: 338mm (13.3")
Monitor-1: LVDS-1 mapped: LVDS res: 1024x768 hz: 60 size: N/A modes: max: 1024x768 min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: ATI RV370 direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio vendor: Dell Latitude D610 Laptop
driver: snd_intel8x0 v: kernel bus-ID: 00:1e.2 chip-ID: 8086:266e class-ID: 0401
API: ALSA v: k6.1.0-9-686-pae status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Dell Latitude D610
driver: tg3 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0
chip-ID: 14e4:1677 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq
modules: wl bus-ID: 03:03.0 chip-ID: 8086:4220 class-ID: 0280
IF: eth1 state: up mac: <filter>
Bluetooth:
Device-1: Dell Wireless 350 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-1:2
chip-ID: 413c:8103 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 1.1 lmp-v: 1.2
sub-v: 679 hci-v: 1.2 rev: 679
Info: acl-mtu: 384:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 30.76 GiB used: 8.15 GiB (26.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS32GPSD330 size: 29.82 GiB block-size:
physical: 512 B logical: 512 B speed: <unknown> type: SSD serial: <filter> rev: 0121 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Kingston model: DataTraveler 2.0 size: 962 MiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 29.81 GiB size: 29.17 GiB (97.87%) used: 7.36 GiB (25.2%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 2.5 MiB (0.2%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3112
Repos:
Packages: pm: dpkg pkgs: 2025 libs: 1026 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 181 Uptime: 4h 13m wakeups: 2 Memory: 1.96 GiB used: 907.2 MiB (45.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
When attempting to play an MPG video file, VLC opens then crashes. (Works with SMPlayer, works on 64-bit)
Chris
@chrispop99 this may be device specific. I ran into problems with the 32 bit in virtualbox but on real hardware my eeepc 904ha (32 bit machine) and my Ideapad-100s (low spec 32 bit UEFI machine) can play videos, if not particularly well when it comes to HD. standard def videos played perfectly fine. I think hardware acceleration was not working though, possibly due to the age of the machines and changes in mesa hardware support.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:04 pm
by dolphin_oracle
Joseph DeGarmo wrote: ↑Sun May 28, 2023 12:44 pm
When testing MX-23 KDE beta in a virtual machine, logging out and starting a new session causes the audio source to drop out. Only rebooting fixes it. Issue occurs on systemd as well and happens on both X11 and Wayland. Is this a VirtualBox issue or does this occur on physical hardware as well? I never have this issue when testing Debian 12 RC KDE and Q4OS 5 testing. And of course, I don't have this issue on my Fedora 37 KDE production machine when Pipewire is used.
I can reproduce. I pushed a fix to pipewire-setup-mx but we will have to work on this some.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:30 pm
by m_pav
@j2mcgreg I think your USB issues are very particular to your system hardware, and in particular, your BIOS. I think it is retaining elements that need to be purged. Have a go at completely resetting your BIOS then re-enable/disable those things you need to get it working with Linux.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:38 pm
by pbear
dolphin_oracle wrote: ↑Sun May 28, 2023 8:28 am
This thread is for feedback and issue reports MX-23 beta 1, any flavor.
Suggestion: Add a link to the
blog page to the first post in this thread.
Downloading now. Will post if run into anything interesting.
Re: MX-23 beta 1 feedback thread
Posted: Sun May 28, 2023 11:55 pm
by dolphin_oracle
pbear wrote: ↑Sun May 28, 2023 11:38 pm
dolphin_oracle wrote: ↑Sun May 28, 2023 8:28 am
This thread is for feedback and issue reports MX-23 beta 1, any flavor.
Suggestion: Add a link to the
blog page to the first post in this thread.
Downloading now. Will post if run into anything interesting.
there is one, along with my usual bit about what logs to post.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 1:55 am
by pbear
dolphin_oracle wrote: ↑Sun May 28, 2023 11:55 pm
there is one, along with my usual bit about what logs to post.
Maybe I'm going blind, but I don't see the link. Also, have moused over each word (not difficult, as there are only seven lines of text).
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 2:58 am
by Eadwine Rose
Firewall being enabled.. I want to bet my socks more people will run into an issue. How do we turn it off?
Fired up a VM. Firewall in the search box of the menu, Firewall Configuration, deactivate the Status slider by clicking on it.
Also.. Nala is driving me nuts with its blinking. I'll just close my eyes while running the update check.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 3:45 am
by MadMax
Just set up the beta in a VM.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Kvm System: QEMU product: Standard PC (i440FX + PIIX, 1996) v: pc-i440fx-5.2
serial: <superuser required> Chassis: type: 1 v: pc-i440fx-5.2 serial: <superuser required>
Mobo: N/A model: N/A serial: N/A BIOS: SeaBIOS v: 1.14.0-2 date: 04/01/2014
CPU:
Info: model: AMD Opteron 63xx class CPU bits: 64 type: SMP arch: Piledriver level: v2
built: 2012-13 process: GF 32nm family: 0x15 (21) model-id: 2 stepping: 0 microcode: 0x1000065
Topology: cpus: 4x cores: 1 smt: <unsupported> cache: L1: 4x 128 KiB (512 KiB)
desc: d-1x64 KiB; i-1x64 KiB L2: 4x 512 KiB (2 MiB) desc: 1x512 KiB L3: 4x 16 MiB (64 MiB)
desc: 1x16 MiB
Speed (MHz): avg: 3400 min/max: N/A cores: 1: 3400 2: 3400 3: 3400 4: 3400 bogomips: 27199
Flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Red Hat QXL paravirtual graphic card driver: qxl v: kernel ports: active: Virtual-1
empty: Virtual-2,Virtual-3,Virtual-4 bus-ID: 00:02.0 chip-ID: 1b36:0100 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: N/A
unloaded: fbdev,modesetting,vesa dri: swrast gpu: qxl note: X driver n/a display-ID: :0.0
screens: 1
Screen-1: 0 s-res: 2048x1152 s-dpi: 96 s-size: 542x305mm (21.34x12.01") s-diag: 622mm (24.49")
Monitor-1: Virtual-1 res: 2048x1152 hz: 60 size: N/A modes: max: 1024x768 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Red Hat QEMU Virtual Machine
driver: snd_hda_intel v: kernel bus-ID: 00:04.0 chip-ID: 8086:2668 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82371AB/EB/MB PIIX4 ACPI vendor: Red Hat Qemu virtual machine
type: network bridge driver: piix4_smbus v: N/A modules: i2c_piix4 port: N/A bus-ID: 00:01.3
chip-ID: 8086:7113 class-ID: 0680
Device-2: Intel 82540EM Gigabit Ethernet vendor: Red Hat QEMU Virtual Machine driver: e1000
v: kernel port: c000 bus-ID: 00:03.0 chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 20 GiB used: 7.22 GiB (36.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 20 GiB block-size:
physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: 2.5+ scheme: MBR
Partition:
ID-1: / raw-size: 19.23 GiB size: 18.76 GiB (97.56%) used: 7.17 GiB (38.2%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 768 MiB size: 738.4 MiB (96.15%) used: 45.1 MiB (6.1%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
Processes: 209 Uptime: 12m wakeups: 503 Memory: 3.82 GiB used: 1.48 GiB (38.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
1. Did the option to select an encryption algorithm get removed from the installer or did I miss it (I checked twice)? Since I'm using hardware without AES acceleration, I prefer Twofish over AES since it's ~30% faster.
2. After the second boot into the installed system, the two Desktop icons - I think they are "MX Help" and "MX Manual" disappear.
3. I have to manually activate and set my keyboard layout after installing which might confuse new users. Is this intended?
4a. when trying to install "wine" from popular apps in MXPI I get this dependency error
Code: Select all
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
winehq-staging : Hängt ab von: wine-staging (= 8.9-1mx23+1)
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
4b. when trying to install "wine-staging" from MXPI active repositories I get a dependency error for wine-gecko.
Code: Select all
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
wine-staging-amd64 : Hängt ab von: wine-gecko2.47.2:amd64 ist aber nicht installierbar
wine-staging-i386:i386 : Hängt ab von: wine-gecko2.47.2:i386 ist aber nicht installierbar
E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete
5. after installing "wine" (8.0~repack4 stable version) from MXPI, then creating a wineprefix, then installing "wine32" from terminal I get "wine: could not load kernel32.dll, status c0000135" when trying to launch winecfg. This is a bug not related to MX and fixed by deleting the wineprefix. The "inaccuracy" might me that wine32 is not installed by default when installing wine, but this is probably also out of the scope of MX development, since these are the Debian repos.
6. Minor: neofetch is only showing "MX x86_64" as OS name, not the full "MX 23 Libretto". This is probably intended.
EDIT: neofetch apparently is not showing number of packages either. Might be a misconfiguration?
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 4:15 am
by AK-47
MadMax wrote: ↑Mon May 29, 2023 3:45 am1. Did the option to select an encryption algorithm get removed from the installer or did I miss it (I checked twice)? Since I'm using hardware without AES acceleration, I prefer Twofish over AES since it's ~30% faster.
This was removed around two years ago based on the feedback from
a survey on this forum, and
a survey on the antiX forum as very few (if any) people actually used it, and more importantly, this can now be achieved by installing to a pre-existing LUKS container.
The encryption algorithm settings were added when installing to pre-existing LUKS containers was not supported. Now that the installer supports installing to pre-existing LVM and LUKS containers, you can now manually create an encrypted container with the desired parameters with
cryptsetup luksFormat, open it up with
cryptsetup open, and then the installer will see it in the custom partition setup in the Virtual Devices section.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 4:40 am
by MadMax
Alright, sounds good. I'm familiar with cryptsetup, so that's no problem.
Let's continue.
7. when trying to install "veracrypt" from MXPI popular apps I get the following error. The package is not present in a repository.
Code: Select all
Unable to apply some actions, aborting
Couldn't find any package matching "veracrypt", but there are 26 packages which contain "veracrypt" in their description:
8. David Batch processor crashes GIMP when closing it (after installing GIMP Full from MXPI popular apps), probably not a MX problem, but a problem of the plugin.
9. I used to install Discord and Skype as flatpaks. How are they installed from MXPI popular apps? I noticed it downloads a deb file and then installs it manually. Do I still get updates that way?
EDIT:
10. fsearch is not in the repositories. I think it is/was in the MX 19 repos. Did it get removed?
Overall I have to say, the beta runs really well. Autostart for both Skype and Discord do work properly (didn't work with the flatpaks in MX19, but was also no big issue for me), editing boot options worked, uninstalling Thunderbird and LibreOffice worked. Keyring recognition works (keyring gets the user password as its password) for Google Chrome and Discord.
I also installed the Faba icon theme and switched the WM theme to Greybird-mx and I'm feeling at home already
I will keep mx-comfort for the window frames, though. Really like the unintrusive design. I'm looking forward to the final release.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 6:32 am
by j2mcgreg
m_pav wrote: ↑Sun May 28, 2023 11:30 pm
@j2mcgreg I think your USB issues are very particular to your system hardware, and in particular, your BIOS. I think it is retaining elements that need to be purged. Have a go at completely resetting your BIOS then re-enable/disable those things you need to get it working with Linux.
Thanks for the advice, but I reset the bios a couple of times when I first encountered the reboot loop with MX 21 and it made no difference. I only mentioned this glitch as a sort of "heads up" to the others here who have the same laptop. I also suspect that the fault that is the cause is so obscure, that it's not worth anybody's time to track down.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 6:33 am
by dolphin_oracle
MadMax wrote: ↑Mon May 29, 2023 3:45 am
Just set up the beta in a VM.
2. After the second boot into the installed system, the two Desktop icons - I think they are "MX Help" and "MX Manual" disappear.
they shouldn't unless the desktop crashed or they were removed from the home folder.
3. I have to manually activate and set my keyboard layout after installing which might confuse new users. Is this intended?
all the previous methods of setting keyboard config pre-install (even pre-boot of the live-usb) are still present.
4a. when trying to install "wine" from popular apps in MXPI I get this dependency error
thanks for catching those mx-pi entries (wine and veracrypt).
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 6:59 am
by richb
There appears to be an error when enabling the test repo. KDE
Code: Select all
2023-05-29 06:44:04.866 DBG default: mx-packageinstaller version: 23.5.03
2023-05-29 06:44:04.929 WRN default: QMetaObject::connectSlotsByName: Connecting slot on_comboRemote_activated() with the first of the following compatible signals: ("activated(int)", "activated(QString)")
2023-05-29 06:44:04.930 DBG default: +++ void MainWindow::setProgressDialog() +++
2023-05-29 06:44:04.931 DBG default: +++ void MainWindow::setup() +++
2023-05-29 06:44:04.934 DBG default: dpkg-query -f '${Version}' -W flatpak
2023-05-29 06:44:04.984 DBG default: "1.14.4-1"
2023-05-29 06:44:04.985 DBG default: apt-get update --print-uris | grep -m1 -qE '/mx/testrepo/dists/bookworm/test/'
2023-05-29 06:44:05.110 DBG default: +++ void MainWindow::loadPmFiles() +++
2023-05-29 06:44:05.210 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-05-29 06:44:05.210 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-05-29 06:44:05.210 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-05-29 06:44:05.272 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::updateInterface() +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::displayWarning(const QString&) +++
2023-05-29 06:44:15.904 DBG default: +++ bool MainWindow::buildPackageLists(bool) +++
2023-05-29 06:44:15.905 DBG default: +++ void MainWindow::clearUi() +++
2023-05-29 06:44:15.905 DBG default: +++ bool MainWindow::downloadPackageList(bool) +++
2023-05-29 06:44:18.345 DBG default: apt-get update --print-uris | tac | grep -m1 -oP 'https?://.*/mx/testrepo/dists/(?=bookworm/test/)'
2023-05-29 06:44:18.448 DBG default: apt-get update --print-uris | tac | grep -m1 -oE 'https?://.*/mx/repo/dists/bookworm/main/' | sed -e 's:/mx/repo/dists/bookworm/main/:/mx/testrepo/dists/:' | grep -oE 'https?://.*/mx/testrepo/dists/'
2023-05-29 06:44:18.546 DBG default: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/"
2023-05-29 06:44:18.547 DBG default: ... downloading: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/bookworm/test/binary-amd64/Packages.gz"
2023-05-29 06:44:18.855 DBG default: There was an error downloading the file: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/bookworm/test/binary-amd64/Packages.gz"
2023-05-29 06:44:18.856 DBG default: +++ void MainWindow::ifDownloadFailed() +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::updateInterface() +++
2023-05-29 06:44:27.874 DBG default: +++ void MainWindow::on_pushCancel_clicked() +++
2023-05-29 06:44:27.875 DBG default: +++ void MainWindow::cleanup() +++
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 7:32 am
by dolphin_oracle
richb wrote: ↑Mon May 29, 2023 6:59 am
There appears to be an error when enabling the test repo. KDE
Code: Select all
2023-05-29 06:44:04.866 DBG default: mx-packageinstaller version: 23.5.03
2023-05-29 06:44:04.929 WRN default: QMetaObject::connectSlotsByName: Connecting slot on_comboRemote_activated() with the first of the following compatible signals: ("activated(int)", "activated(QString)")
2023-05-29 06:44:04.930 DBG default: +++ void MainWindow::setProgressDialog() +++
2023-05-29 06:44:04.931 DBG default: +++ void MainWindow::setup() +++
2023-05-29 06:44:04.934 DBG default: dpkg-query -f '${Version}' -W flatpak
2023-05-29 06:44:04.984 DBG default: "1.14.4-1"
2023-05-29 06:44:04.985 DBG default: apt-get update --print-uris | grep -m1 -qE '/mx/testrepo/dists/bookworm/test/'
2023-05-29 06:44:05.110 DBG default: +++ void MainWindow::loadPmFiles() +++
2023-05-29 06:44:05.210 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-05-29 06:44:05.210 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-05-29 06:44:05.210 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-05-29 06:44:05.272 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::updateInterface() +++
2023-05-29 06:44:10.754 DBG default: +++ void MainWindow::displayWarning(const QString&) +++
2023-05-29 06:44:15.904 DBG default: +++ bool MainWindow::buildPackageLists(bool) +++
2023-05-29 06:44:15.905 DBG default: +++ void MainWindow::clearUi() +++
2023-05-29 06:44:15.905 DBG default: +++ bool MainWindow::downloadPackageList(bool) +++
2023-05-29 06:44:18.345 DBG default: apt-get update --print-uris | tac | grep -m1 -oP 'https?://.*/mx/testrepo/dists/(?=bookworm/test/)'
2023-05-29 06:44:18.448 DBG default: apt-get update --print-uris | tac | grep -m1 -oE 'https?://.*/mx/repo/dists/bookworm/main/' | sed -e 's:/mx/repo/dists/bookworm/main/:/mx/testrepo/dists/:' | grep -oE 'https?://.*/mx/testrepo/dists/'
2023-05-29 06:44:18.546 DBG default: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/"
2023-05-29 06:44:18.547 DBG default: ... downloading: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/bookworm/test/binary-amd64/Packages.gz"
2023-05-29 06:44:18.855 DBG default: There was an error downloading the file: "http://mirrors.rit.edu/mxlinux/mx-packages/mx/testrepo/dists/bookworm/test/binary-amd64/Packages.gz"
2023-05-29 06:44:18.856 DBG default: +++ void MainWindow::ifDownloadFailed() +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-05-29 06:44:18.865 DBG default: +++ void MainWindow::updateInterface() +++
2023-05-29 06:44:27.874 DBG default: +++ void MainWindow::on_pushCancel_clicked() +++
2023-05-29 06:44:27.875 DBG default: +++ void MainWindow::cleanup() +++
thanks. this is a known issue as the test repo is empty and the backports repo does not exist.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 7:39 am
by Gaer Boy
My install has failed twice. Using custom formatting, defining root & swap partitions and labelling root partition 'MX23-B1'. On boot gives error 'No such device'. UUID doesn't seem to appear in minstall.log.
minstall.log
Code: Select all
System: Kernel: 6.0.0-3.1mx-amd64 [6.0.7-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.0.0-3.1mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower November 22 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Gigabyte product: B550I AORUS PRO AX v: N/A serial: <filter>
Mobo: Gigabyte model: B550I AORUS PRO AX v: x.x serial: <filter>
UEFI: American Megatrends v: F11 date: 12/31/2020
Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K270 serial: <filter>
charge: 100% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M185 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Info: 6-Core model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 19 (25) model-id: 50 (80) stepping: 0 microcode: A50000B cache:
L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 93423
Speed: 1511 MHz min/max: 1400/3900 MHz boost: enabled Core speeds (MHz): 1: 1503
2: 1497 3: 1495 4: 1499 5: 1212 6: 1681 7: 1497 8: 1440 9: 1639 10: 1496 11: 1210
12: 1498
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Cezanne vendor: Gigabyte driver: amdgpu v: kernel bus-ID: 07:00.0
chip-ID: 1002:1638 class-ID: 0300
Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver:
loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI-A-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5")
diag: 184mm (7.2")
OpenGL: renderer: AMD RENOIR (LLVM 14.0.5 DRM 3.48 6.0.0-3.1mx-amd64)
v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 07:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 07:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k6.0.0-3.1mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel port: f000
bus-ID: 05:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: f000 bus-ID: 06:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Bluetooth: Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-8:4
chip-ID: 8087:0029 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: slave accept
Drives: Local Storage: total: 2.05 TiB used: 252.35 GiB (12.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD110 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: A8J0 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000DM005 HD103SJ
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD
rpm: 7200 serial: <filter> rev: 00E5 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 870 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 1B6Q scheme: GPT
ID-4: /dev/sde maj-min: 8:64 type: USB vendor: Lexar model: USB Flash Drive
size: 3.66 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 30 GiB size: 29.36 GiB (97.87%) used: 13.94 GiB (47.5%) fs: ext4
dev: /dev/sdc5 maj-min: 8:37
ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%) used: 941 KiB (0.9%) fs: vfat
dev: /dev/sdc1 maj-min: 8:33
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sdb11 maj-min: 8:27
Sensors: System Temperatures: cpu: 38.1 C mobo: 16.8 C gpu: amdgpu temp: 32.0 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2413 lib: 1255 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://free.hands.com/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://free.hands.com/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 341 Uptime: 11m wakeups: 5 Memory: 15.06 GiB used: 1.91 GiB (12.7%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
MX23 root partition is /dev/sdc6. QSI from MX21.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:15 am
by dolphin_oracle
Gaer Boy wrote: ↑Mon May 29, 2023 7:39 am
My install has failed twice. Using custom formatting, defining root & swap partitions and labelling root partition 'MX23-B1'. On boot gives error 'No such device'. UUID doesn't seem to appear in minstall.log.
minstall.log
Code: Select all
System: Kernel: 6.0.0-3.1mx-amd64 [6.0.7-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.0.0-3.1mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower November 22 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Gigabyte product: B550I AORUS PRO AX v: N/A serial: <filter>
Mobo: Gigabyte model: B550I AORUS PRO AX v: x.x serial: <filter>
UEFI: American Megatrends v: F11 date: 12/31/2020
Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K270 serial: <filter>
charge: 100% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M185 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Info: 6-Core model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 19 (25) model-id: 50 (80) stepping: 0 microcode: A50000B cache:
L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 93423
Speed: 1511 MHz min/max: 1400/3900 MHz boost: enabled Core speeds (MHz): 1: 1503
2: 1497 3: 1495 4: 1499 5: 1212 6: 1681 7: 1497 8: 1440 9: 1639 10: 1496 11: 1210
12: 1498
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Cezanne vendor: Gigabyte driver: amdgpu v: kernel bus-ID: 07:00.0
chip-ID: 1002:1638 class-ID: 0300
Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver:
loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI-A-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5")
diag: 184mm (7.2")
OpenGL: renderer: AMD RENOIR (LLVM 14.0.5 DRM 3.48 6.0.0-3.1mx-amd64)
v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 07:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 07:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k6.0.0-3.1mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel port: f000
bus-ID: 05:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: f000 bus-ID: 06:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Bluetooth: Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-8:4
chip-ID: 8087:0029 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: slave accept
Drives: Local Storage: total: 2.05 TiB used: 252.35 GiB (12.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD110 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: A8J0 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000DM005 HD103SJ
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD
rpm: 7200 serial: <filter> rev: 00E5 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 870 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 1B6Q scheme: GPT
ID-4: /dev/sde maj-min: 8:64 type: USB vendor: Lexar model: USB Flash Drive
size: 3.66 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 30 GiB size: 29.36 GiB (97.87%) used: 13.94 GiB (47.5%) fs: ext4
dev: /dev/sdc5 maj-min: 8:37
ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%) used: 941 KiB (0.9%) fs: vfat
dev: /dev/sdc1 maj-min: 8:33
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sdb11 maj-min: 8:27
Sensors: System Temperatures: cpu: 38.1 C mobo: 16.8 C gpu: amdgpu temp: 32.0 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2413 lib: 1255 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://free.hands.com/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://free.hands.com/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] http://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 341 Uptime: 11m wakeups: 5 Memory: 15.06 GiB used: 1.91 GiB (12.7%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
MX23 root partition is /dev/sdc6. QSI from MX21.
did you install grub? the log indicates no. so how did you try to boot the mx23 installation
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:20 am
by Jerry3904
A couple of dock items
@Adrian on my AAO 722
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: Acer product: AO722 v: V1.08 serial: <superuser required> Chassis: type: 10
v: 1.08 serial: <superuser required>
Mobo: Acer model: JE10-BZ serial: <superuser required> BIOS: Acer v: 1.08 date: 12/06/2011
Battery:
ID-1: BAT1 charge: 6.6 Wh (18.0%) condition: 36.7/57.7 Wh (63.7%) volts: 10.6 min: 11.1
model: Sanyo AL10A31 type: Li-ion serial: <filter> status: discharging
CPU:
Info: model: AMD C-60 APU with Radeon HD Graphics bits: 64 type: MCP arch: Bobcat level: v1
built: 2011-13 process: GF 40nm family: 0x14 (20) model-id: 2 stepping: 0 microcode: 0x5000119
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 1024 KiB desc: 2x512 KiB
Speed (MHz): avg: 997 high: 1023 min/max: 800/1000 boost: enabled scaling: driver: acpi-cpufreq
governor: ondemand cores: 1: 971 2: 1023 bogomips: 3990
Flags: ht lm nx pae sse sse2 sse3 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Wrestler [Radeon HD 6290] vendor: Acer Incorporated ALI driver: radeon v: kernel
alternate: amdgpu arch: TeraScale-2 code: Evergreen process: TSMC 32-40nm built: 2009-15 ports:
active: LVDS-1 empty: HDMI-A-1,VGA-1 bus-ID: 00:01.0 chip-ID: 1002:9807 class-ID: 0300
Device-2: Suyin WebCam type: USB driver: uvcvideo bus-ID: 2-1:2 chip-ID: 064e:d214
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: r600 gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: LVDS-1 mapped: LVDS model: AU Optronics 0x325c built: 2011 res: 1366x768 hz: 60
dpi: 136 gamma: 1.2 size: 256x144mm (10.08x5.67") diag: 294mm (11.6") ratio: 16:9 modes:
max: 1366x768 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: AMD PALM (DRM 2.50.0 / 6.1.0-9-amd64 LLVM 15.0.6)
direct-render: Yes
Audio:
Device-1: AMD Wrestler HDMI Audio vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel
bus-ID: 00:01.1 chip-ID: 1002:1314 class-ID: 0403
Device-2: AMD SBx00 Azalia vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel
bus-ID: 00:14.2 chip-ID: 1002:4383 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet vendor: Acer Incorporated ALI driver: atl1c
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 06:00.0 chip-ID: 1969:2062
class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lite-On driver: ath9k
v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 168c:0032
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 256.17 GiB used: 5.9 GiB (2.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT275MX300SSD1 size: 256.17 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: R040 scheme: MBR
Partition:
ID-1: / raw-size: 49.63 GiB size: 48.55 GiB (97.82%) used: 5.52 GiB (11.4%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 198.53 GiB size: 194.36 GiB (97.90%) used: 394.5 MiB (0.2%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors:
System Temperatures: cpu: 67.5 C mobo: N/A gpu: radeon temp: 67.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 1822 libs: 907 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 197 Uptime: 1d 18h 4m wakeups: 15 Memory: 7.49 GiB used: 1.49 GiB (19.9%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
1. If I put the dock on autohide, the portion showing is too thin (apparently near zero) to catch with the cursor--which defeats the whole purpose. Unsure ATM if that is just this machine.
2. As Melber (?) mentioned, dockmaker is taller than the screen and the size can't be changed in the usual manner (Alt+RightClick). Putting the 4 new elements into two columns would probably solve it for this resolution.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:48 am
by Joseph DeGarmo
dolphin_oracle wrote: ↑Sun May 28, 2023 11:04 pm
Joseph DeGarmo wrote: ↑Sun May 28, 2023 12:44 pm
When testing MX-23 KDE beta in a virtual machine, logging out and starting a new session causes the audio source to drop out. Only rebooting fixes it. Issue occurs on systemd as well and happens on both X11 and Wayland. Is this a VirtualBox issue or does this occur on physical hardware as well? I never have this issue when testing Debian 12 RC KDE and Q4OS 5 testing. And of course, I don't have this issue on my Fedora 37 KDE production machine when Pipewire is used.
I can reproduce. I pushed a fix to pipewire-setup-mx but we will have to work on this some.
Will this be fixed in the Beta 2 release? I'm really looking forward to this.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:50 am
by dolphin_oracle
Joseph DeGarmo wrote: ↑Mon May 29, 2023 8:48 am
dolphin_oracle wrote: ↑Sun May 28, 2023 11:04 pm
Joseph DeGarmo wrote: ↑Sun May 28, 2023 12:44 pm
When testing MX-23 KDE beta in a virtual machine, logging out and starting a new session causes the audio source to drop out. Only rebooting fixes it. Issue occurs on systemd as well and happens on both X11 and Wayland. Is this a VirtualBox issue or does this occur on physical hardware as well? I never have this issue when testing Debian 12 RC KDE and Q4OS 5 testing. And of course, I don't have this issue on my Fedora 37 KDE production machine when Pipewire is used.
I can reproduce. I pushed a fix to pipewire-setup-mx but we will have to work on this some.
Will this be fixed in the Beta 2 release? I'm really looking forward to this.
trying not to wait, updates will come down through the regular update process.
what I've done fixed it for me, will see if it works OK for you.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 9:14 am
by Joseph DeGarmo
Thanks for the audio fix. Now another issue. When I use the application launcher and adjust the settings, logging into a new session or rebooting resets all the settings every time, thus resulting in no expanded power options on the bottom or favorites in a grid. I like the application launcher, but it's a bit frustrating to have to use the application dashboard as a workaround.
https://imgur.com/a/V1AuAOt
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 9:44 am
by Jerry3904
This is on Fluxbox, right?
--Are you running Live? With persistence?
--What settings, and how are you adjusting them?
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 9:53 am
by rbeltz48
When using the MATE desktop, logout and shutdown do not work. I have to "force quit" to get to a login screen. They work fine with MX 21.3.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 9:59 am
by Joseph DeGarmo
Jerry3904 wrote: ↑Mon May 29, 2023 9:44 am
This is on Fluxbox, right?
--Are you running Live? With persistence?
--What settings, and how are you adjusting them?
This is on KDE Plasma. The VM is a full install. I check the settings on the application launcher settings panel. By default, it does not even apply Plasma's default application launcher settings used in distros like Kubuntu and Arch Linux. And I tried both X11 and Wayland with the issue not being resolved.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 10:48 am
by Melber
Jerry3904 wrote: ↑Mon May 29, 2023 8:20 am
A couple of dock items ...
1. If I put the dock on autohide, the portion showing is too thin (apparently near zero) to catch with the cursor--which defeats the whole purpose. Unsure ATM if that is just this machine.
Nope, same issue on my laptop.
Edited init file to
session.screen0.slit.autoHide: true
Dock hides so only border is visible, but no mouse over is possible to get it to show.
Tried removing border from dock- no change.
Tried making border thicker - no change.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 10:58 am
by dolphin_oracle
Joseph DeGarmo wrote: ↑Mon May 29, 2023 9:59 am
Jerry3904 wrote: ↑Mon May 29, 2023 9:44 am
This is on Fluxbox, right?
--Are you running Live? With persistence?
--What settings, and how are you adjusting them?
This is on KDE Plasma. The VM is a full install. I check the settings on the application launcher settings panel. By default, it does not even apply Plasma's default application launcher settings used in distros like Kubuntu and Arch Linux. And I tried both X11 and Wayland with the issue not being resolved.
I can confirm the power and session buttons do not stay expanded. they are present in the pull out menu, but they don't stay expanded. that is weird. might be an issue with debian's build, which is what we are using. the application launcher widget itself stays changed though.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 10:59 am
by Melber
On the subject of the fluxbox init file, is anybody else seeing this behavior?
- manually edit init file and save (eg. change session.screen0.slit.autoHide: false to true)
- fluxbox menu > leave > refresh
- edit to init file gets overwritten/reverted
Changing the fluxbox-remote commands in the menu-mx file from
fluxbox-remote reloadstyle; fluxbox-remote reconfigure
to the old command
fluxbox-remote restart
leaves the edited init file as is.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:05 am
by Joseph DeGarmo
dolphin_oracle wrote: ↑Mon May 29, 2023 10:58 am
Joseph DeGarmo wrote: ↑Mon May 29, 2023 9:59 am
Jerry3904 wrote: ↑Mon May 29, 2023 9:44 am
This is on Fluxbox, right?
--Are you running Live? With persistence?
--What settings, and how are you adjusting them?
This is on KDE Plasma. The VM is a full install. I check the settings on the application launcher settings panel. By default, it does not even apply Plasma's default application launcher settings used in distros like Kubuntu and Arch Linux. And I tried both X11 and Wayland with the issue not being resolved.
I can confirm the power and session buttons do not stay expanded. they are present in the pull out menu, but they don't stay expanded. that is weird. might be an issue with debian's build, which is what we are using. the application launcher widget itself stays changed though.
I can confirm that Debian 12 release candidate does not exhibit this strange behavior on Plasma's application launcher. Not sure why this is an issue on MX-23.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:12 am
by dolphin_oracle
Joseph DeGarmo wrote: ↑Mon May 29, 2023 11:05 am
dolphin_oracle wrote: ↑Mon May 29, 2023 10:58 am
Joseph DeGarmo wrote: ↑Mon May 29, 2023 9:59 am
This is on KDE Plasma. The VM is a full install. I check the settings on the application launcher settings panel. By default, it does not even apply Plasma's default application launcher settings used in distros like Kubuntu and Arch Linux. And I tried both X11 and Wayland with the issue not being resolved.
I can confirm the power and session buttons do not stay expanded. they are present in the pull out menu, but they don't stay expanded. that is weird. might be an issue with debian's build, which is what we are using. the application launcher widget itself stays changed though.
I can confirm that Debian 12 release candidate does not exhibit this strange behavior on Plasma's application launcher. Not sure why this is an issue on MX-23.
Ok I figured it out. small conflict in our defaults setting package. can fix. thanks for the report.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:16 am
by Melber
siamhie wrote: ↑Sun May 28, 2023 12:31 pm
...I'm getting a slew of new init errors in my .xsession-errors log...
This is due to double keybinding for same action
Code: Select all
Keys: Invalid key/modifier on line 59): Control Mod1 Bksp :Exit
I think it just doesn't like Bksp. Change line 59 in the fluxbox keys file to
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:22 am
by siamhie
Melber wrote: ↑Mon May 29, 2023 10:59 am
On the subject of the fluxbox init file, is anybody else seeing this behavior?
- manually edit init file and save (eg. change session.screen0.slit.autoHide: false to true)
- fluxbox menu > leave > refresh
- edit to init file gets overwritten/reverted
Changing the fluxbox-remote commands in the menu-mx file from
fluxbox-remote reloadstyle; fluxbox-remote reconfigure
to the old command
fluxbox-remote restart
leaves the edited init file as is.
Yes. I can duplicate it. Reverting back to fluxbox-remote restart fixes it.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:31 am
by siamhie
Melber wrote: ↑Mon May 29, 2023 11:16 am
siamhie wrote: ↑Sun May 28, 2023 12:31 pm
...I'm getting a slew of new init errors in my .xsession-errors log...
This is due to double keybinding for same action
Code: Select all
Keys: Invalid key/modifier on line 59): Control Mod1 Bksp :Exit
I think it just doesn't like Bksp. Change line 59 in the fluxbox keys file to
That did the trick. I thought it was due to 2 bindings for one action. Didn't think of it as a spelling message as both bindings (backspace and del) worked.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:34 am
by Gaer Boy
dolphin_oracle wrote: ↑Mon May 29, 2023 8:15 am
did you install grub? the log indicates no. so how did you try to boot the mx23 installation
:bagoverhead: Stupid error! I don't install grub - I want the MX21 grub to retain control. I just forgot to update grub - twice!
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:39 am
by Joseph DeGarmo
OK, so I managed to edit the KDE info center to show MX Linux instead of Debian/GNU Linux. I added a config file by using this command:
sudo nano /etc/xdg/kcm-about-distrorc
Then I entered the following into the new config file:
[General]
Name=MX Linux
LogoPath=/usr/share/gazelle-installer-data/logo.png
Website=
https://mxlinux.org
Version=23
I rebooted and the KDE info center was updated. Now the trick is that the version number will need to be updated with each new version release.
zzzMX KDE Info Center.png
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:50 am
by Jerry3904
Melber wrote: ↑Sun May 28, 2023 6:52 pm
kobaian wrote: ↑Sun May 28, 2023 6:20 pm
MXFB-Font does not work well. Selecting font for GTK does not work at all, for Fluxbox it is impossible to change the font to any non-regular style (bold, italic etc.) Are you sure this is the last version of the script from pre-Beta? (BTW - The "about" button with some information about the version of the app will be helpful.)
Looks like the last version didn't make it into the beta - have to wait for the next update of mxfb-accessories.
Sorry, missed this. It's already up on MX-Linux with both your PRs so will ask DO to package.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:00 pm
by siamhie
Melber wrote: ↑Sun May 28, 2023 12:11 pm
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Here are some initial remarks re MX-Fluxbox beta1
...
Default dock (wmalauncher)
-------------
Default dock is NOT showing up on session start. following errors appear (one by one) in ~/.xsession.errors
Code: Select all
--background-color: Argument '<COLOR|GRADIENT>' is missing.
--border-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-background-color: Argument '<COLOR|GRADIENT>' is missing.
--hover-border-color: Argument '<COLOR|GRADIENT>' is missing.
These arguments could instead be added to the TTIPS+ items
Also, mxdk script is missing a sed command...
Can confirm.
DefaultDock.mkdk isn't right.
- pkill wmalauncher command is missing
- Hex colour definitions need to be quoted, otherwise they are being read as comments.
ceeslans wrote: ↑Sun May 28, 2023 10:36 am
Also, mxdk script is missing a sed command...
?? sed command is there and working for me
To fix replace contents of
~/.fluxbox/scripts/DefaultDock.mxdk with this
Code: Select all
#!/bin/bash
pkill wmalauncher
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: TopLeft/' $HOME/.fluxbox/init
fluxbox-remote reconfigure; sleep 1
# TOOLTIPS
TTIPS+=" --tooltip-show-delay 250"
TTIPS+=" --tooltip-text-padding 3"
TTIPS+=" --tooltip-border-size 3"
TTIPS+=" --tooltip-foreground-color #ffffff"
TTIPS+=" --tooltip-background-color #1d2324"
#commands for dock launchers
wmalauncher --desktop-file mx-tools.desktop --tooltip-text "MX Tools" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
wmalauncher --desktop-file custom-toolbox-mxfb.desktop --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 --tooltip-text "Settings manager" $TTIPS & sleep 0.1
wmalauncher --desktop-file mxfb-help.desktop --tooltip-text "Help" --background-color "#1d2324" --border-color "#1d2324" --hover-background-color "#29353b" --hover-border-color "#0f56d9" --window-size 48 $TTIPS & sleep 0.1
@Melber I got the dockmaker to run after removing all of the #'s.
Before
Code: Select all
#!/bin/bash
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: TopLeft/' $HOME/.fluxbox/init
fluxbox-remote restart; sleep 1
# TOOLTIPS
TTIPS+=" --tooltip-show-delay 250"
TTIPS+=" --tooltip-text-padding 3"
TTIPS+=" --tooltip-border-size 3"
TTIPS+=" --tooltip-foreground-color #ffffff"
TTIPS+=" --tooltip-background-color #1d2324"
#commands for dock launchers
wmalauncher --desktop-file mx-tools.desktop --tooltip-text "MX Tools" --background-color #1d2324 --border-color #1d2324 --hover-background-color #29353b --hover-border-color #0f56d9 --window-size 48 $TTIPS & sleep 0.1
wmalauncher --desktop-file custom-toolbox-mxfb.desktop --background-color #1d2324 --border-color #1d2324 --hover-background-color #29353b --hover-border-color #0f56d9 --window-size 48 --tooltip-text "Settings manager" $TTIPS & sleep 0.1
wmalauncher --desktop-file mxfb-help.desktop --tooltip-text "Help" --background-color #1d2324 --border-color #1d2324 --hover-background-color #29353b --hover-border-color #0f56d9 --window-size 48 $TTIPS & sleep 0.1
After
Code: Select all
#!/bin/bash
#set up slit location
sed -i 's/^session.screen0.slit.placement:.*/session.screen0.slit.placement: TopLeft/' $HOME/.fluxbox/init
fluxbox-remote restart; sleep 1
# TOOLTIPS
TTIPS+=" --tooltip-show-delay 250"
TTIPS+=" --tooltip-text-padding 3"
TTIPS+=" --tooltip-border-size 3"
TTIPS+=" --tooltip-foreground-color #ffffff"
TTIPS+=" --tooltip-background-color #1d2324"
#commands for dock launchers
wmalauncher --desktop-file mx-tools.desktop --tooltip-text "MX Tools" --background-color 1d2324 --border-color 1d2324 --hover-background-color 29353b --hover-border-color 0f56d9 --window-size 48 $TTIPS & sleep 0.1
wmalauncher --desktop-file custom-toolbox-mxfb.desktop --background-color 1d2324 --border-color 1d2324 --hover-background-color 29353b --hover-border-color 0f56d9 --window-size 48 --tooltip-text "Settings manager" $TTIPS & sleep 0.1
wmalauncher --desktop-file mxfb-help.desktop --tooltip-text "Help" --background-color 1d2324 --border-color 1d2324 --hover-background-color 29353b --hover-border-color 0f56d9 --window-size 48 $TTIPS & sleep 0.1
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:15 pm
by Jerry3904
I've already uploaded Melber's changes and I'd like to see if that makes a difference before I return to this. Thanks.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:17 pm
by Joseph DeGarmo
About the application launcher bug I reported on the KDE version, I installed the "Labeled Application Launcher" widget and applied that in place of the original application launcher. Functions like normal now. Temporary workaround until the original launcher gets fixed.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:20 pm
by siamhie
Melber wrote: ↑Mon May 29, 2023 10:48 am
Jerry3904 wrote: ↑Mon May 29, 2023 8:20 am
A couple of dock items ...
1. If I put the dock on autohide, the portion showing is too thin (apparently near zero) to catch with the cursor--which defeats the whole purpose. Unsure ATM if that is just this machine.
Nope, same issue on my laptop.
Edited init file to
session.screen0.slit.autoHide: true
Dock hides so only border is visible, but no mouse over is possible to get it to show.
Tried removing border from dock- no change.
Tried making border thicker - no change.
@Jerry3904 @Melber I'm not seeing that issue. When set to autohide I show a thin yellow line (I changed the color and moved to center of the screen to be able to see it better) and when I mouse over the dock reappears. I just can't right-click on it.
dock.jpg
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2334 high: 3900 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2199 3: 2200 4: 2200 5: 2800 6: 3900
7: 2200 8: 2200 9: 2199 10: 2200 11: 2199 12: 2199 13: 2200 14: 2200 15: 2056 16: 2200
bogomips: 124808
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, audio, telephony
Drives:
Local Storage: total: 8.19 TiB used: 878.01 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 37.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 36.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.72 GiB (7.9%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 34.9 C mobo: N/A gpu: amdgpu temp: 39.0 C mem: 42.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1060
Repos:
Packages: pm: dpkg pkgs: 1924 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 343 Uptime: 34m wakeups: 2 Memory: 31.27 GiB used: 2.21 GiB (7.1%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:49 pm
by asqwerth
Beta 1 XFCE (real metal install):
- the printer and scanner auto-detect now detects my Brother network printer/scanner. Scanner no longer shows the weird authentication popup window. This is with the new default firewall "on" settings. Excellent.
- the Sunflower entry in MXPI Popular Apps doesn't work - I assume this hasn't been packaged for MX23 yet.
It's late here so I'll test more tomorrow.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 12:55 pm
by eselma
Code: Select all
System: Kernel: 5.10.0-23-amd64 [5.10.179-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.3_KDE_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: PRIME B250M-A v: Rev X.0x serial: <filter> UEFI: American Megatrends v: 0316
date: 11/08/2016
CPU: Info: Quad Core model: Intel Core i5-7500 bits: 64 type: MCP arch: Kaby Lake family: 6 model-id: 9E (158)
stepping: 9 microcode: F0 cache: L2: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 27199
Speed: 800 MHz min/max: 800/3800 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT disabled
Graphics: Device-1: Intel HD Graphics 630 vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:5912
class-ID: 0300
Device-2: Xiongmai web camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6:3 chip-ID: 23c5:1478
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: loaded: modesetting unloaded: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5")
OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: Intel 200 Series PCH HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
chip-ID: 8086:a2f0 class-ID: 0403
Device-2: Xiongmai web camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6:3 chip-ID: 23c5:1478
class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.0-23-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8192EE PCIe Wireless Network Adapter driver: rtl8192ee v: kernel modules: wl port: e000
bus-ID: 01:00.0 chip-ID: 10ec:818b class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK PRIME B450M-A driver: r8169
v: kernel port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 4.55 TiB used: 2.25 TiB (49.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 1000GB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 04RL scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST2000DM008-2UB102 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: MBR
Partition: ID-1: / raw-size: 64 GiB size: 62.44 GiB (97.57%) used: 39.4 GiB (63.1%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 6.2 MiB (1.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb5 maj-min: 8:21
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 3302 lib: 1786 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
3: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye main non-free
2: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/opera-stable.list
1: deb https://deb.opera.com/opera-stable/ stable non-free #Opera Browser (final releases)
Active apt repos in: /etc/apt/sources.list.d/softmaker.list
1: deb https://shop.softmaker.com/repo/apt stable non-free
Info: Processes: 203 Uptime: 4h 49m wakeups: 0 Memory: 7.63 GiB used: 2.64 GiB (34.6%) Init: systemd v: 247 runlevel: 5
default: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4
running-in: quick-system-info-mx inxi: 3.3.06
Boot Mode: UEFI
Well , my last report was stopped at some point. here I paste the QS Info despite it is useless on this issue. It happens whatever system you try to install.
Yesterday I tried the beta-1 of MX-23. All started well, in text mode, as it should be. If you pressed F2 (language) and selected "Catalan", the next screen has this text in the bottom line:
"Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem".
It seems that, instead of the requested language (Catalan, CA) it uses (Czech, CZ). IIRC, reported this bug when issued MX-21 (same issue, "Small bug on installer of MX-21 KDE» 18 Nov 2021 10:41", but it is still present in MX-23. Not sure about antiX.
I am the translator into Catalan, and now all appears to be 100% translated. Anyway, if you need any further contribution/correction, I am ready.
This seems to be a small bug, easy to fix. Hope the final issue of MX-23 can be free of this.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 1:08 pm
by dolphin_oracle
eselma wrote: ↑Mon May 29, 2023 12:55 pm
Code: Select all
System: Kernel: 5.10.0-23-amd64 [5.10.179-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.3_KDE_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: PRIME B250M-A v: Rev X.0x serial: <filter> UEFI: American Megatrends v: 0316
date: 11/08/2016
CPU: Info: Quad Core model: Intel Core i5-7500 bits: 64 type: MCP arch: Kaby Lake family: 6 model-id: 9E (158)
stepping: 9 microcode: F0 cache: L2: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 27199
Speed: 800 MHz min/max: 800/3800 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT disabled
Graphics: Device-1: Intel HD Graphics 630 vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:5912
class-ID: 0300
Device-2: Xiongmai web camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6:3 chip-ID: 23c5:1478
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: loaded: modesetting unloaded: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5")
OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: Intel 200 Series PCH HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
chip-ID: 8086:a2f0 class-ID: 0403
Device-2: Xiongmai web camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-6:3 chip-ID: 23c5:1478
class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.0-23-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8192EE PCIe Wireless Network Adapter driver: rtl8192ee v: kernel modules: wl port: e000
bus-ID: 01:00.0 chip-ID: 10ec:818b class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK PRIME B450M-A driver: r8169
v: kernel port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 4.55 TiB used: 2.25 TiB (49.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 1000GB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 04RL scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: MBR
ID-3: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST2000DM008-2UB102 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0001 scheme: MBR
Partition: ID-1: / raw-size: 64 GiB size: 62.44 GiB (97.57%) used: 39.4 GiB (63.1%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 6.2 MiB (1.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb5 maj-min: 8:21
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 3302 lib: 1786 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
3: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye main non-free
2: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/opera-stable.list
1: deb https://deb.opera.com/opera-stable/ stable non-free #Opera Browser (final releases)
Active apt repos in: /etc/apt/sources.list.d/softmaker.list
1: deb https://shop.softmaker.com/repo/apt stable non-free
Info: Processes: 203 Uptime: 4h 49m wakeups: 0 Memory: 7.63 GiB used: 2.64 GiB (34.6%) Init: systemd v: 247 runlevel: 5
default: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4
running-in: quick-system-info-mx inxi: 3.3.06
Boot Mode: UEFI
Well , my last report was stopped at some point. here I paste the QS Info despite it is useless on this issue. It happens whatever system you try to install.
Yesterday I tried the beta-1 of MX-23. All started well, in text mode, as it should be. If you pressed F2 (language) and selected "Catalan", the next screen has this text in the bottom line:
"Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem".
It seems that, instead of the requested language (Catalan, CA) it uses (Czech, CZ). IIRC, reported this bug when issued MX-21 (same issue, "Small bug on installer of MX-21 KDE» 18 Nov 2021 10:41", but it is still present in MX-23. Not sure about antiX.
I am the translator into Catalan, and now all appears to be 100% translated. Anyway, if you need any further contribution/correction, I am ready.
This seems to be a small bug, easy to fix. Hope the final issue of MX-23 can be free of this.
@fehlix ? what do you think.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 1:12 pm
by Jerry3904
@Melber @kobaian @ceeslans DO has packaged mx-fluxbox and mxfb-accessories so by tomorrow you should have a better test candidate for both dock and font.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 1:35 pm
by Jerry3904
Adrian just reworked dockmakier and now it fits on my 1378x766 screen. Will be coming through regular update mechanism. @Adrian many thanks!
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 2:12 pm
by BV206
MX 23 xfce wi-fi hotspot mode no longer works like it did on MX 21(or Debian 11) at least when booted from the live USB.
In
Network Manager /
Wi-Fi Security If I set
Security to any kind of encryption with a password (
WPA & WPA2 Personal or
WPA3 Personal) I can't connect to the hotspot with my phone.
Security has to be set to
None or
Enhanced Open and I have to disable UFW to make it work.
Somebody else needs to verify this.
The same thing occurs on MX 21 if I update all the network related items in the backports repo so I don't know if this is a new "feature" from Debian or something changed that is causing me a hardware problem.
For the hardware info Here is QSI from MX 21.3.
Code: Select all
System: Kernel: 6.1.0-9mx-ahs-amd64 [6.1.27-1~mx21ahs+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9mx-ahs-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: HP product: N/A v: N/A serial: <filter> Chassis: type: 3
serial: <filter>
Mobo: HP model: 8643 v: SMVB serial: <filter> UEFI: AMI v: F.44 date: 11/15/2022
Battery: Device-1: hidpp_battery_0 model: Logitech ERGO M575 Trackball serial: <filter>
charge: 25% rechargeable: yes status: Discharging
CPU: Info: Quad Core model: AMD Ryzen 5 3400G with Radeon Vega Graphics bits: 64
type: MT MCP arch: Zen family: 17 (23) model-id: 18 (24) stepping: 1 microcode: 8108109
cache: L2: 2 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 59090
Speed: 1400 MHz min/max: 1400/3700 MHz boost: enabled Core speeds (MHz): 1: 1400
2: 1397 3: 1395 4: 1395 5: 1400 6: 1400 7: 1400 8: 1400
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile Series]
vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 0c:00.0 chip-ID: 1002:15d8
class-ID: 0300
Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver:
loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 92 s-size: 528x297mm (20.8x11.7")
s-diag: 606mm (23.9")
Monitor-1: HDMI-A-0 res: 1920x1080 hz: 60 dpi: 92 size: 528x297mm (20.8x11.7")
diag: 606mm (23.9")
OpenGL:
renderer: AMD Radeon Vega 11 Graphics (raven LLVM 14.0.5 DRM 3.49 6.1.0-9mx-ahs-amd64)
v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel v: kernel
bus-ID: 0c:00.1 chip-ID: 1002:15de class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus-ID: 0c:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k6.1.0-9mx-ahs-amd64 running: yes
Sound Server-2: PulseAudio v: 15.0 running: yes
Network: Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8821ce v: N/A modules: rtw88_8821ce port: e000
bus-ID: 09:00.0 chip-ID: 10ec:c821 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: d000 bus-ID: 0a:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: Realtek Realtek Bluetooth 4.2 Adapter type: USB driver: btusb v: 0.8
bus-ID: 1-12:3 chip-ID: 0bda:b00a class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 1021:8 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: slave accept
Drives: Local Storage: total: 238.47 GiB used: 87.23 GiB (36.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix model: BC501 HFM256GDJTNG-8310A
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s lanes: 2
type: SSD serial: <filter> rev: 80003C00 temp: 45.9 C scheme: GPT
Partition: ID-1: / raw-size: 47.98 GiB size: 46.93 GiB (97.80%) used: 20.15 GiB (42.9%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 132.9 MiB (13.7%)
fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
ID-3: /home raw-size: 139.98 GiB size: 136.73 GiB (97.67%) used: 66.95 GiB (49.0%)
fs: ext4 dev: /dev/dm-1 maj-min: 253:1 mapped: 1.home.fsm
Swap: Kernel: swappiness: 5 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors: System Temperatures: cpu: 30.0 C mobo: N/A gpu: amdgpu temp: 34.0 C
Fan Speeds (RPM): N/A
Repos: Packages: 2129 note: see --pkg apt: 2111 lib: 1097 flatpak: 18
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
No active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
Info: Processes: 267 Uptime: 1h 5m wakeups: 8 Memory: 13.55 GiB used: 1.55 GiB (11.5%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 3:45 pm
by fehlix
eselma wrote: ↑Mon May 29, 2023 12:55 pm
Code: Select all
System: Kernel: 5.10.0-23-amd64 [5.10.179-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd
Desktop: KDE Plasma 5.20.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.3_KDE_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Boot Mode: UEFI
Well , my last report was stopped at some point. here I paste the QS Info despite it is useless on this issue. It happens whatever system you try to install.
Yesterday I tried the beta-1 of MX-23. All started well, in text mode, as it should be. If you pressed F2 (language) and selected "Catalan", the next screen has this text in the bottom line:
"Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem".
It seems that, instead of the requested language (Catalan, CA) it uses (Czech, CZ). IIRC, reported this bug when issued MX-21 (same issue, "Small bug on installer of MX-21 KDE» 18 Nov 2021 10:41", but it is still present in MX-23. Not sure about antiX.
I am the translator into Catalan, and now all appears to be 100% translated. Anyway, if you need any further contribution/correction, I am ready.
This seems to be a small bug, easy to fix. Hope the final issue of MX-23 can be free of this.
Hmme, the QSI shows you booted in UEFI. The F2-language selection is only available in BIOS/MBR mode - not within UEFI GRUB menu. So that's a bit unclear within your report.
Are you saying that only the displayed text "Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem".
is within the wrong language?
Is it tranlsted with another language, or is the line untranslated in English? (Ooops re-read it again:) You are saying it is displayed in Czech, not in Catalan and not in English. OK.
But the system booted further into the correct selected language?
And does happen in both UEFI-boot and BIOS/MBR or only within one?
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 4:06 pm
by siamhie
@Jerry3904 Will lxappearance make it to MX-23 fluxbox final?
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 4:42 pm
by Jerry3904
It will not--which is why it's not in this b1.
But it'd be great if for the sake of testing you could look carefully at the the Font and Theme for MX-23 (starting tomorrow, after the updated Font comes through). DO has done a great job with MX Tweak and our "user-devs" have done a huge amount of work on Font.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 5:05 pm
by eselma
Fehlix wrote:
"Hmme, the QSI shows you booted in UEFI. The F2-language selection is only available in BIOS/MBR mode - not within UEFI GRUB menu. So that's a bit unclear within your report."
As I said, this QSI belongs to my desktop computer and it is not relevant for this issue. It is NOT the QSI of the beta 1. Only posted to insure that the report was accepted.
Are you saying that only the displayed text "Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem". is within the wrong language? Is it translated with another language, or is the line untranslated in English? (Ooops re-read it again:) You are saying it is displayed in Czech, not in Catalan and not in English. OK.
Yes, other texts appear in Catalan.
But the system booted further into the correct selected language?
Another Yes, the system starts in Catalan whenever possible.
And does happen in both UEFI-boot and BIOS/MBR or only within one?
It happened from MX-21 (not in previous issues) on different hardware: Desktop, laptop, BIOS, UEFI...
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 5:24 pm
by fehlix
eselma wrote: ↑Mon May 29, 2023 5:05 pm
Fehlix wrote:
"
Hmme, the QSI shows you booted in UEFI. The F2-language selection is only available in BIOS/MBR mode - not within UEFI GRUB menu. So that's a bit unclear within your report."
As I said, this QSI belongs to my desktop computer and it is not relevant for this issue. It is NOT the QSI of the beta 1. Only posted to insure that the report was accepted.
Are you saying that only the displayed text "Alt-F1 Vides spousteci proces" and "Alt-F10 vratit se sem". is within the wrong language? Is it translated with another language, or is the line untranslated in English? (Ooops re-read it again:) You are saying it is displayed in Czech, not in Catalan and not in English. OK.
Yes, other texts appear in Catalan.
But the system booted further into the correct selected language?
Another Yes, the system starts in Catalan whenever possible.
And does happen in both UEFI-boot and BIOS/MBR or only within one?
It happened from MX-21 (not in previous issues) on different hardware: Desktop, laptop, BIOS, UEFI...
OK, thanks. Good, you mentioned the issue again - so I guess time to fix it. Will put onto the todo list to get fixed before MX23 got released.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 5:48 pm
by siamhie
Jerry3904 wrote:
It will not--which is why it's not in this b1.
@Jerry3904 OK, thanks. I use lxappearance to be able to change mouse cursors I've installed from the repo or from my back-up drive.
I tried the terminal command below (in beta1) but not all windows respect the change. (Librewolf come to mind).
Code: Select all
sudo update-alternatives --config x-cursor-theme
Jerry3904 wrote:
But it'd be great if for the sake of testing you could look carefully at the the Font and Theme for MX-23 (starting tomorrow, after the updated Font comes through). DO has done a great job with MX Tweak and our "user-devs" have done a huge amount of work on Font.
I will definitely test those out and report my findings.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:50 pm
by i_ri
mxfluxbox (Will X and K any difference?)
minstall --oem, minstall -o
i am not getting anything different than a normal installation.
it gets to the page to fill in username and password, so i abort and try again --oem. no luck. What does --oem success start with?
this with su-to-root -X -c minstall --oem; root author password accepted.
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 8:58 pm
by Jerry3904
Updates just came through for me. We have fixed the dock function, but the location is TopLeft (was short of time, just copied what had been posted). Will change.
Font looks correct now.
EDIT: uploaded corrected dock location, changed desktop icons to Papirus
Re: MX-23 beta 1 feedback thread
Posted: Mon May 29, 2023 11:23 pm
by operadude
Coming to you LIVE from MX-23 Xfce x64 Beta-1. QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1600 min/max: 800/3900 scaling: driver: intel_pstate governor: powersave
cores: 1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 40.0 C
Device-2: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-8:7
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 1-8:7 chip-ID: 1d6c:1278 bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
Device-3: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.75 TiB used: 1.96 GiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 32.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB model: Mass Storage Device size: 29.49 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-8: /dev/sdl maj-min: 8:176 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A gpu: radeon temp: 40.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 223 Uptime: 6m wakeups: 3 Memory: 31.3 GiB used: 2.06 GiB (6.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Issue: Tried to use this live USB (Micro SD) on a Legacy Machine -- Asus P5KPL.
Result: Boot starts, GRUB loads, able to traverse menu items. But...
====> Boot Hangs at "udev" and never completes
Here's the LUM log:
Code: Select all
=====================================================================
/usr/local/bin/live-usb-maker gui -N --label=MX23_XFCE_BETA1 -C off --from=/media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso -t /dev/sdk
program: live-usb-maker
started: Mon 29 May 2023 11:45:05 AM IDT
version: 2.41.19-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
kernel: 5.10.0-23-amd64
OS: MX 21.3 (Wildflower)
found lib: /usr/local/lib/cli-shell-utils/cli-shell-utils.bash
lib version: 2.41.05-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
---------------------------------------------------------------------
Found man page: live-usb-maker.1
Will use target device /dev/sdk (29.5G Generic STORAGE_DEVICE)
Will use source file /media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso
Distro: MX-23_beta1_x64 Libretto May 28, 2023
Found grub config 2.0
Estimated extfs overhead for 30149M is 44M
Total Used Extra
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.4 GiB 2.00 GiB 27.4 GiB
uefi partition 50 MiB 32 MiB 18 MiB
Ready to make live-usb on device sdk
... by copying file /media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso
>> partition-clear
Total bytes: 31666995200
Total blocks: 61849600
> dd status=none if=/dev/zero of=/dev/sdk bs=512 count=34
> dd status=none if=/dev/zero of=/dev/sdk bs=512 count=34 seek=64
> dd status=none conv=notrunc if=/dev/zero of=/dev/sdk bs=512 count=34 seek=61849566
> partprobe /dev/sdk
>> partition-make
Using msdos partitioning
> parted --script --align optimal /dev/sdk unit MiB mklabel msdos
> dd status=none if=/dev/zero of=/dev/sdk seek=1024 bs=1K count=128
> parted --script --align optimal /dev/sdk unit MiB mkpart primary 1 30149
> parted --script --align optimal /dev/sdk unit MiB set 1 boot on
> dd status=none if=/dev/zero of=/dev/sdk seek=30872576 bs=1K count=128
> parted --script --align optimal /dev/sdk unit MiB mkpart primary 30149 30198
> parted --script --align optimal /dev/sdk unit MiB set 2 esp on
> partprobe /dev/sdk
> wait_for_file /dev/sdk1
>> makefs-bios
> mkfs.ext4 -O ^64bit -m0 -i16384 -J size=32 /dev/sdk1
mke2fs 1.46.2 (28-Feb-2021)
64-bit filesystem support is not enabled. The larger fields afforded by this feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 7717888 4k blocks and 1929536 inodes
Filesystem UUID: bc2eda53-a117-4b21-8119-e13975c9d51d
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: 0/236 done
Writing inode tables: 0/236 done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: 0/236 done
> tune2fs -L MX23_XFCE_BETA1 /dev/sdk1
tune2fs 1.46.2 (28-Feb-2021)
> wait_for_file /dev/sdk2
>> makefs-uefi
> mkfs.vfat -F 32 -n MX-UEFI /dev/sdk2
mkfs.fat 4.2 (2021-01-31)
> partprobe /dev/sdk
> wait_for_file /dev/sdk1
> mkdir -p /run/live-usb-maker/main
> mount -t ext4 /dev/sdk1 /run/live-usb-maker/main
> wait_for_file /dev/sdk2
> mkdir -p /run/live-usb-maker/uefi
> mount -t vfat /dev/sdk2 /run/live-usb-maker/uefi
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdk1 ext4 29G 24K 29G 1% /run/live-usb-maker/main
/dev/sdk2 vfat 49M 512 49M 1% /run/live-usb-maker/uefi
>> copy-uefi
copy from iso to uefi partition
files [Ee][Ff][Ii] version
> cp --no-dereference --preserve=mode,links --recursive /run/live-usb-maker/iso/EFI /run/live-usb-maker/uefi/.
> cp --no-dereference --preserve=mode,links --recursive /run/live-usb-maker/iso/version /run/live-usb-maker/uefi/.
Fix Dell uefi memtest bug
> cp /run/live-usb-maker/uefi/EFI/BOOT/grubx64.efi /run/live-usb-maker/uefi/EFI/BOOT/fallback.efi
>> copy-main
> rm -rf /run/live-usb-maker/main/boot.orig
copy from iso to main partition
vm.dirty_bytes = 20000000
copy /antiX/vmlinuz
> cpio -pdm --quiet /run/live-usb-maker/main/
> e4defrag -v ./antiX/vmlinuz
e4defrag 1.46.2 (28-Feb-2021)
ext4 defragmentation for ./antiX/vmlinuz
[1/1][1/1]./antiX/vmlinuz: 100% extents: 1 -> 1 [ OK ]
Success: [1/1]
copy /antiX/initrd.gz
> cpio -pdm --quiet /run/live-usb-maker/main/
> e4defrag -v ./antiX/initrd.gz
e4defrag 1.46.2 (28-Feb-2021)
ext4 defragmentation for ./antiX/initrd.gz
[1/1][1/1]./antiX/initrd.gz: 100% extents: 1 -> 1 [ OK ]
Success: [1/1]
copy remaining files ...
> cpio -pdm --quiet /run/live-usb-maker/main/
copy pids: 40267 40270
vm.dirty_bytes = 20000000
vm.dirty_ratio = 0
> write_file /run/live-usb-maker/main/made-by-live-usb-maker created: Mon 29 May 2023 11:47:03 AM IDT
program: live-usb-maker
version: 2.41.19-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
> dd status=none if=/dev/urandom of=/run/live-usb-maker/main/antiX/random-seed bs=512 count=1
> chmod 600 /run/live-usb-maker/main/antiX/random-seed
> rm -rf /run/live-usb-maker/main/.disk
>> check-usb-md5
check md5 for initrd.gz
> md5sum -c initrd.gz.md5
initrd.gz: OK
check md5 for linuxfs
> md5sum -c linuxfs.md5
linuxfs: OK
check md5 for vmlinuz
> md5sum -c vmlinuz.md5
vmlinuz: OK
>> uuids
Using antiX/MX grub config 2.0
> mkdir -p /run/live-usb-maker/uefi/boot/grub
> cp /run/live-usb-maker/main/boot/grub/config/efi-grub.cfg /run/live-usb-maker/uefi/boot/grub/grub.cfg
> touch /run/live-usb-maker/main/boot/grub/config/did-efi-grub
> sed -i /^\s*#/! s/%UUID%/bc2eda53-a117-4b21-8119-e13975c9d51d/ /run/live-usb-maker/uefi/boot/grub/grub.cfg
> rm -f /run/live-usb-maker/main/boot/grub/config/*.id
> touch /run/live-usb-maker/main/boot/grub/config/9ab18e6ef8b39b65d4da28d5a66c2476.id
> sed -i /^\s*#/! s|%ID_FILE%|/boot/grub/config/9ab18e6ef8b39b65d4da28d5a66c2476.id| /run/live-usb-maker/uefi/boot/grub/grub.cfg
>> install
extlinux version 6.04
> dd status=none bs=440 conv=notrunc count=1 if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sdk
> rm -f /run/live-usb-maker/main/boot/syslinux/chain.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/gfxboot.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/ldlinux.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libcom32.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libmenu.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libutil.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/menu.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/syslinux.bin
> rm -f /run/live-usb-maker/main/boot/syslinux/version
> cp /usr/lib/syslinux/modules/bios/chain.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/gfxboot.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/vesamenu.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/ldlinux.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libcom32.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libmenu.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libutil.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/linux.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/menu.c32 /run/live-usb-maker/main/boot/syslinux/
> write_file /run/live-usb-maker/main/boot/syslinux/version 6.04
> extlinux -i /run/live-usb-maker/main/boot/syslinux
/run/live-usb-maker/main/boot/syslinux is device /dev/sdk1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdk1 ext4 29G 2.0G 27G 7% /run/live-usb-maker/main
/dev/sdk2 vfat 49M 13M 36M 26% /run/live-usb-maker/uefi
>> done
live-usb-maker took 2 minutes.
So, near the top of the log:
Code: Select all
>> makefs-bios
> mkfs.ext4 -O ^64bit -m0 -i16384 -J size=32 /dev/sdk1
mke2fs 1.46.2 (28-Feb-2021)
Live USB made with MX-LUM on this (UEFI) machine; checksums all OK; using it now on this machine. However, when creating using LUM, I did notice that there are only 2 partitions, not the usual 3:
When using MX-LUM, I usually see something like this:
Code: Select all
Total Used Extra
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.3 GiB 19.2 GiB 10.1 GiB
bios partition 150 MiB 46 MiB 104 MiB
uefi partition 50 MiB 30 MiB 20 MiB
However, from the LUM log for Beta-1, I get this:
Code: Select all
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.4 GiB 2.00 GiB 27.4 GiB
uefi partition 50 MiB 32 MiB 18 MiB
Is the BIOS partition missing? Is a missing BIOS partition causing GRUB to hang on the Asus P5KPL? Do I need to use MX-LUM from the BIOS machine (Asus P5KPL)?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:58 am
by Melber
siamhie wrote: ↑Sun May 28, 2023 6:42 pm
...Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
Did you try manually editing these entries in
~/gtkrc-2.0
Code: Select all
gtk-cursor-theme-name="DMZ-Black"
gtk-cursor-theme-size=0
and
~/.config/gtk-3.0/settings.ini ?
Code: Select all
gtk-cursor-theme-name=DMZ-Black
gtk-cursor-theme-size=0
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 4:52 am
by ceeslans
Still having issues with the updated mx-dockmaker.
When selecting a
file, then mx-dockmaker will create a correct wmalauncher command line in the target *.mxdk script :
Code: Select all
wmalauncher --desktop-file thunar.desktop --background-color "#ff4a4a" --hover-background-color "#ff0000" --border-color "#2a2a2a" --hover-border-color "#8a8a8a" --window-size 48& sleep 0.1
But when instead setting a
command and selecting an appropriate
icon (as shown in below screenshot), then that custom command is written as
icon name to the *.mxdk file :
Code: Select all
wmalauncher --command pkexec Thunar --icon pkexec Thunar --background-color "#ff4a4a" --hover-background-color "#ff0000" --border-color "#2a2a2a" --hover-border-color "#8a8a8a" --window-size 48& sleep 0.1
... and subsequently, that entry will not appear in the dock.
Hope this can be resolved by
@Adrian ?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 5:30 am
by Jerry3904
Good catch. I thought I had seen such an extension once but then couldn't find it again and decided my eyes were crossed.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 5:41 am
by operadude
operadude wrote: ↑Mon May 29, 2023 11:23 pm
Coming to you LIVE from MX-23 Xfce x64 Beta-1. QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1600 min/max: 800/3900 scaling: driver: intel_pstate governor: powersave
cores: 1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 40.0 C
Device-2: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-8:7
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 1-8:7 chip-ID: 1d6c:1278 bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
Device-3: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.75 TiB used: 1.96 GiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 32.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB model: Mass Storage Device size: 29.49 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-8: /dev/sdl maj-min: 8:176 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A gpu: radeon temp: 40.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 223 Uptime: 6m wakeups: 3 Memory: 31.3 GiB used: 2.06 GiB (6.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Issue: Tried to use this live USB (Micro SD) on a Legacy Machine -- Asus P5KPL.
Result: Boot starts, GRUB loads, able to traverse menu items. But...
====> Boot Hangs at "udev" and never completes
Here's the LUM log:
Code: Select all
=====================================================================
/usr/local/bin/live-usb-maker gui -N --label=MX23_XFCE_BETA1 -C off --from=/media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso -t /dev/sdk
program: live-usb-maker
started: Mon 29 May 2023 11:45:05 AM IDT
version: 2.41.19-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
kernel: 5.10.0-23-amd64
OS: MX 21.3 (Wildflower)
found lib: /usr/local/lib/cli-shell-utils/cli-shell-utils.bash
lib version: 2.41.05-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
---------------------------------------------------------------------
Found man page: live-usb-maker.1
Will use target device /dev/sdk (29.5G Generic STORAGE_DEVICE)
Will use source file /media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso
Distro: MX-23_beta1_x64 Libretto May 28, 2023
Found grub config 2.0
Estimated extfs overhead for 30149M is 44M
Total Used Extra
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.4 GiB 2.00 GiB 27.4 GiB
uefi partition 50 MiB 32 MiB 18 MiB
Ready to make live-usb on device sdk
... by copying file /media/opera-dude/Seagate Expansion Drive/Documents/Computer/OS/Linux Distros/MX Linux/MX-23_Beta1/XFCE/x64/MX-23_beta1_x64.iso
>> partition-clear
Total bytes: 31666995200
Total blocks: 61849600
> dd status=none if=/dev/zero of=/dev/sdk bs=512 count=34
> dd status=none if=/dev/zero of=/dev/sdk bs=512 count=34 seek=64
> dd status=none conv=notrunc if=/dev/zero of=/dev/sdk bs=512 count=34 seek=61849566
> partprobe /dev/sdk
>> partition-make
Using msdos partitioning
> parted --script --align optimal /dev/sdk unit MiB mklabel msdos
> dd status=none if=/dev/zero of=/dev/sdk seek=1024 bs=1K count=128
> parted --script --align optimal /dev/sdk unit MiB mkpart primary 1 30149
> parted --script --align optimal /dev/sdk unit MiB set 1 boot on
> dd status=none if=/dev/zero of=/dev/sdk seek=30872576 bs=1K count=128
> parted --script --align optimal /dev/sdk unit MiB mkpart primary 30149 30198
> parted --script --align optimal /dev/sdk unit MiB set 2 esp on
> partprobe /dev/sdk
> wait_for_file /dev/sdk1
>> makefs-bios
> mkfs.ext4 -O ^64bit -m0 -i16384 -J size=32 /dev/sdk1
mke2fs 1.46.2 (28-Feb-2021)
64-bit filesystem support is not enabled. The larger fields afforded by this feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 7717888 4k blocks and 1929536 inodes
Filesystem UUID: bc2eda53-a117-4b21-8119-e13975c9d51d
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: 0/236 done
Writing inode tables: 0/236 done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: 0/236 done
> tune2fs -L MX23_XFCE_BETA1 /dev/sdk1
tune2fs 1.46.2 (28-Feb-2021)
> wait_for_file /dev/sdk2
>> makefs-uefi
> mkfs.vfat -F 32 -n MX-UEFI /dev/sdk2
mkfs.fat 4.2 (2021-01-31)
> partprobe /dev/sdk
> wait_for_file /dev/sdk1
> mkdir -p /run/live-usb-maker/main
> mount -t ext4 /dev/sdk1 /run/live-usb-maker/main
> wait_for_file /dev/sdk2
> mkdir -p /run/live-usb-maker/uefi
> mount -t vfat /dev/sdk2 /run/live-usb-maker/uefi
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdk1 ext4 29G 24K 29G 1% /run/live-usb-maker/main
/dev/sdk2 vfat 49M 512 49M 1% /run/live-usb-maker/uefi
>> copy-uefi
copy from iso to uefi partition
files [Ee][Ff][Ii] version
> cp --no-dereference --preserve=mode,links --recursive /run/live-usb-maker/iso/EFI /run/live-usb-maker/uefi/.
> cp --no-dereference --preserve=mode,links --recursive /run/live-usb-maker/iso/version /run/live-usb-maker/uefi/.
Fix Dell uefi memtest bug
> cp /run/live-usb-maker/uefi/EFI/BOOT/grubx64.efi /run/live-usb-maker/uefi/EFI/BOOT/fallback.efi
>> copy-main
> rm -rf /run/live-usb-maker/main/boot.orig
copy from iso to main partition
vm.dirty_bytes = 20000000
copy /antiX/vmlinuz
> cpio -pdm --quiet /run/live-usb-maker/main/
> e4defrag -v ./antiX/vmlinuz
e4defrag 1.46.2 (28-Feb-2021)
ext4 defragmentation for ./antiX/vmlinuz
[1/1][1/1]./antiX/vmlinuz: 100% extents: 1 -> 1 [ OK ]
Success: [1/1]
copy /antiX/initrd.gz
> cpio -pdm --quiet /run/live-usb-maker/main/
> e4defrag -v ./antiX/initrd.gz
e4defrag 1.46.2 (28-Feb-2021)
ext4 defragmentation for ./antiX/initrd.gz
[1/1][1/1]./antiX/initrd.gz: 100% extents: 1 -> 1 [ OK ]
Success: [1/1]
copy remaining files ...
> cpio -pdm --quiet /run/live-usb-maker/main/
copy pids: 40267 40270
vm.dirty_bytes = 20000000
vm.dirty_ratio = 0
> write_file /run/live-usb-maker/main/made-by-live-usb-maker created: Mon 29 May 2023 11:47:03 AM IDT
program: live-usb-maker
version: 2.41.19-2302 (Sat, 25 Feb 2023 12:45:10 -0500)
> dd status=none if=/dev/urandom of=/run/live-usb-maker/main/antiX/random-seed bs=512 count=1
> chmod 600 /run/live-usb-maker/main/antiX/random-seed
> rm -rf /run/live-usb-maker/main/.disk
>> check-usb-md5
check md5 for initrd.gz
> md5sum -c initrd.gz.md5
initrd.gz: OK
check md5 for linuxfs
> md5sum -c linuxfs.md5
linuxfs: OK
check md5 for vmlinuz
> md5sum -c vmlinuz.md5
vmlinuz: OK
>> uuids
Using antiX/MX grub config 2.0
> mkdir -p /run/live-usb-maker/uefi/boot/grub
> cp /run/live-usb-maker/main/boot/grub/config/efi-grub.cfg /run/live-usb-maker/uefi/boot/grub/grub.cfg
> touch /run/live-usb-maker/main/boot/grub/config/did-efi-grub
> sed -i /^\s*#/! s/%UUID%/bc2eda53-a117-4b21-8119-e13975c9d51d/ /run/live-usb-maker/uefi/boot/grub/grub.cfg
> rm -f /run/live-usb-maker/main/boot/grub/config/*.id
> touch /run/live-usb-maker/main/boot/grub/config/9ab18e6ef8b39b65d4da28d5a66c2476.id
> sed -i /^\s*#/! s|%ID_FILE%|/boot/grub/config/9ab18e6ef8b39b65d4da28d5a66c2476.id| /run/live-usb-maker/uefi/boot/grub/grub.cfg
>> install
extlinux version 6.04
> dd status=none bs=440 conv=notrunc count=1 if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sdk
> rm -f /run/live-usb-maker/main/boot/syslinux/chain.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/gfxboot.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/ldlinux.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libcom32.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libmenu.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/libutil.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/menu.c32
> rm -f /run/live-usb-maker/main/boot/syslinux/syslinux.bin
> rm -f /run/live-usb-maker/main/boot/syslinux/version
> cp /usr/lib/syslinux/modules/bios/chain.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/gfxboot.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/vesamenu.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/ldlinux.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libcom32.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libmenu.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/libutil.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/linux.c32 /run/live-usb-maker/main/boot/syslinux/
> cp /usr/lib/syslinux/modules/bios/menu.c32 /run/live-usb-maker/main/boot/syslinux/
> write_file /run/live-usb-maker/main/boot/syslinux/version 6.04
> extlinux -i /run/live-usb-maker/main/boot/syslinux
/run/live-usb-maker/main/boot/syslinux is device /dev/sdk1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdk1 ext4 29G 2.0G 27G 7% /run/live-usb-maker/main
/dev/sdk2 vfat 49M 13M 36M 26% /run/live-usb-maker/uefi
>> done
live-usb-maker took 2 minutes.
So, near the top of the log:
Code: Select all
>> makefs-bios
> mkfs.ext4 -O ^64bit -m0 -i16384 -J size=32 /dev/sdk1
mke2fs 1.46.2 (28-Feb-2021)
Live USB made with MX-LUM on this (UEFI) machine; checksums all OK; using it now on this machine. However, when creating using LUM, I did notice that there are only 2 partitions, not the usual 3:
When using MX-LUM, I usually see something like this:
Code: Select all
Total Used Extra
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.3 GiB 19.2 GiB 10.1 GiB
bios partition 150 MiB 46 MiB 104 MiB
uefi partition 50 MiB 30 MiB 20 MiB
However, from the LUM log for Beta-1, I get this:
Code: Select all
entire drive 29.5 GiB 29.5 GiB 1 MiB
main partition 29.4 GiB 2.00 GiB 27.4 GiB
uefi partition 50 MiB 32 MiB 18 MiB
Is the BIOS partition missing? Is a missing BIOS partition causing GRUB to hang on the Asus P5KPL? Do I need to use MX-LUM from the BIOS machine (Asus P5KPL)?
[SOLVED]:
MY BAD!!!
Bad USB Port on Asus P5KPL!
Switched to a rear port. All is Good!
New Issue:
MX-Tools -> MX System Sounds:
On Right-Hand Side: "Session Sounds":
Only a CheckBox for "Login".
No Session Sounds for "Logout" ???
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:37 am
by Jerry3904
About the dock autohide problem, I think I found
a clue: on my screen autohide works fine when the dock is located bottom center or right center, but not when it is top center or left center. Didn't try other locations.
Code: Select all
$ inxi -G
Graphics:
Device-1: AMD Wrestler [Radeon HD 6290] driver: radeon v: kernel
Device-2: Suyin WebCam type: USB driver: uvcvideo
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: r600 gpu: radeon
resolution: 1366x768~60Hz
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: AMD PALM (DRM 2.50.0 /
6.1.0-9-amd64 LLVM 15.0.6)
Not yet sure what that means or how to correct it...
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:51 am
by operadude
Successful Install to Legacy Machine: ASUS P5KPL -- QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: P5KPL-CM v: x.xx serial: <superuser required>
BIOS: American Megatrends v: 0702 date: 08/27/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M185 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core2 Duo E7500 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2133 min/max: 1596/2926 scaling: driver: acpi-cpufreq governor: ondemand
cores: 1: 2133 2: 2133 bogomips: 11732
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GT218 [GeForce 210] vendor: Gigabyte driver: nouveau v: kernel non-free:
series: 340.xx status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla
process: 40-80nm built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: HDMI-A-1
empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0a65 class-ID: 0300 temp: 54.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1280x720 s-dpi: 96 s-size: 338x190mm (13.31x7.48") s-diag: 388mm (15.27")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: BEKO-VJAZ1 serial: <filter> built: 2005 res: 1280x720
hz: 50 dpi: 46 gamma: 1.2 size: 708x398mm (27.87x15.67") diag: 806mm (31.7") ratio: 16:9 modes:
max: 1280x720 min: 720x400
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: NVA8 direct-render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: ASUSTeK P5KPL-CM
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8 class-ID: 0403
Device-2: NVIDIA High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0be3 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet vendor: ASUSTeK P5KPL-CM
driver: ATL1E v: N/A modules: atl1e pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: ec00
bus-ID: 02:00.0 chip-ID: 1969:1026 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 260.84 GiB used: 6.69 GiB (2.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: <unknown> type: SSD serial: <filter> rev: 61.3 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Hitachi model: HDT721016SLA380 size: 149.05 GiB
block-size: physical: 512 B logical: 512 B speed: <unknown> type: HDD rpm: 7200 serial: <filter>
rev: A3AA scheme: MBR
Partition:
ID-1: / raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 6.55 GiB (33.5%) fs: ext4 dev: /dev/sdb2
maj-min: 8:18
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 46.7 MiB (4.8%) fs: ext4
dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 105.2 MiB (0.5%) fs: ext4
dev: /dev/sdb5 maj-min: 8:21
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.97 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb6
maj-min: 8:22
Sensors:
System Temperatures: cpu: 61.0 C mobo: 39.0 C gpu: nouveau temp: 54.0 C
Fan Speeds (RPM): cpu: 2250 case-1: 2445
Power: 12v: 11.88 5v: N/A 3.3v: 3.23 vbat: N/A gpu: nouveau mV: 900.00
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.linux.org.tr/mx/repo/mx/repo/ bookworm main non-free
Info:
Processes: 187 Uptime: 25m wakeups: 3 Memory: 3.82 GiB used: 1.89 GiB (49.5%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
1. Loving the new logo!
2. Awesome new Updater GUI
3. Ran 63 Updates: Success
4. Still an Issue:
MX-Tools -> MX System Sounds:
On Right-Hand Side: "Session Sounds":
Only a CheckBox for "Login"
No Session Sounds for "Logout" ?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:54 am
by kc1di
trying out MX23-KDE. so far looks good will test more today. But no major problems as yet.
good work :)
@operadude. Nice radio :)
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:56 am
by ceeslans
Jerry3904 wrote: ↑Tue May 30, 2023 6:37 am
About the dock autohide problem, I think I found
a clue: on my screen autohide works fine when the dock is located bottom center or right center, but not when it is top center or left center. Didn't try other locations.
<snip>
Not yet sure what that means or how to correct it...
Can't reproduce such autohide failure. That's one of the functions that works well here...
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:58 am
by dolphin_oracle
operadude wrote: ↑Tue May 30, 2023 6:51 am
Successful Install to Legacy Machine: ASUS P5KPL -- QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: P5KPL-CM v: x.xx serial: <superuser required>
BIOS: American Megatrends v: 0702 date: 08/27/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M185 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core2 Duo E7500 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2133 min/max: 1596/2926 scaling: driver: acpi-cpufreq governor: ondemand
cores: 1: 2133 2: 2133 bogomips: 11732
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GT218 [GeForce 210] vendor: Gigabyte driver: nouveau v: kernel non-free:
series: 340.xx status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla
process: 40-80nm built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: HDMI-A-1
empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0a65 class-ID: 0300 temp: 54.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1280x720 s-dpi: 96 s-size: 338x190mm (13.31x7.48") s-diag: 388mm (15.27")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: BEKO-VJAZ1 serial: <filter> built: 2005 res: 1280x720
hz: 50 dpi: 46 gamma: 1.2 size: 708x398mm (27.87x15.67") diag: 806mm (31.7") ratio: 16:9 modes:
max: 1280x720 min: 720x400
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: NVA8 direct-render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: ASUSTeK P5KPL-CM
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8 class-ID: 0403
Device-2: NVIDIA High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0be3 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet vendor: ASUSTeK P5KPL-CM
driver: ATL1E v: N/A modules: atl1e pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: ec00
bus-ID: 02:00.0 chip-ID: 1969:1026 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 260.84 GiB used: 6.69 GiB (2.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: <unknown> type: SSD serial: <filter> rev: 61.3 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Hitachi model: HDT721016SLA380 size: 149.05 GiB
block-size: physical: 512 B logical: 512 B speed: <unknown> type: HDD rpm: 7200 serial: <filter>
rev: A3AA scheme: MBR
Partition:
ID-1: / raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 6.55 GiB (33.5%) fs: ext4 dev: /dev/sdb2
maj-min: 8:18
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 46.7 MiB (4.8%) fs: ext4
dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 105.2 MiB (0.5%) fs: ext4
dev: /dev/sdb5 maj-min: 8:21
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.97 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb6
maj-min: 8:22
Sensors:
System Temperatures: cpu: 61.0 C mobo: 39.0 C gpu: nouveau temp: 54.0 C
Fan Speeds (RPM): cpu: 2250 case-1: 2445
Power: 12v: 11.88 5v: N/A 3.3v: 3.23 vbat: N/A gpu: nouveau mV: 900.00
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.linux.org.tr/mx/repo/mx/repo/ bookworm main non-free
Info:
Processes: 187 Uptime: 25m wakeups: 3 Memory: 3.82 GiB used: 1.89 GiB (49.5%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
1. Loving the new logo!
2. Awesome new Updater GUI
3. Ran 63 Updates: Success
4. Still an Issue:
MX-Tools -> MX System Sounds:
On Right-Hand Side: "Session Sounds":
Only a CheckBox for "Login"
No Session Sounds for "Logout" ?
Logout was removed because it was unreliable. It will be restored if I ever figure out how.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:01 am
by operadude
Thanks @dolphin_oracle :
I really like the logout sound, so thanks for looking into it.
Please point me in the right direction, if I can help with this!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:03 am
by operadude
More good news re: ASUS P5KPL (Legacy Machine):
Suspend works as it should (no problems with lightdm and black screen of death)!!!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:09 am
by kc1di
I have one question in KDE konsole - how do I get rid of all the extra spaces?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:13 am
by Jerry3904
ceeslans wrote: ↑Tue May 30, 2023 6:56 am
Jerry3904 wrote: ↑Tue May 30, 2023 6:37 am
About the dock autohide problem, I think I found
a clue: on my screen autohide works fine when the dock is located bottom center or right center, but not when it is top center or left center. Didn't try other locations.
<snip>
Not yet sure what that means or how to correct it...
Can't reproduce such autohide failure. That's one of the functions that works well here...
With what screen resolution? Maybe it's just a problem with 1366x768
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:36 am
by ceeslans
Yeah, might be. If I'm not mistaken, @siamhie was also running a lower resolution when reporting same issue.
My screen has 1920x1080 resolution...
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:41 am
by ceeslans
Here's another suggestion for improvement of mx-dockmaker.
Use the 'fluxbox-remote configure' command instead of 'fluxbox-remote restart'. This will result in a much smoother transition when changing from one dock to another.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:48 am
by operadude
operadude wrote: ↑Tue May 30, 2023 7:01 am
Thanks @dolphin_oracle :
I really like the logout sound, so thanks for looking into it.
Please point me in the right direction, if I can help with this!
@dolphin_oracle :
Just remembered:
I think MX-23 Alpha2 (Xfce, x64) has the logout sound.
I'll double-check.
Don't know if that helps you.
Let me know if I can help in any way!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 8:05 am
by Melber
Jerry3904 wrote: ↑Tue May 30, 2023 7:13 am
ceeslans wrote: ↑Tue May 30, 2023 6:56 am
Jerry3904 wrote: ↑Tue May 30, 2023 6:37 am
About the dock autohide problem, I think I found
a clue: on my screen autohide works fine when the dock is located bottom center or right center, but not when it is top center or left center. Didn't try other locations.
<snip>
Not yet sure what that means or how to correct it...
Can't reproduce such autohide failure. That's one of the functions that works well here...
With what screen resolution? Maybe it's just a problem with 1366x768
You could be right, I'm seeing the issue and have a 1366x768 screen too...
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 9:10 am
by Joseph DeGarmo
Apparently there is an issue with connected gamepads controlling the desktop cursor, which has been a persistent bug on MX for years. Here's the fix:
1. sudo nano /etc/X11/xorg.conf.d/51-joystick.conf
2. Copy and paste this, then save the file:
Section "InputClass"
Identifier "joystick catchall"
MatchIsJoystick "on"
MatchDevicePath "/dev/input/event*"
Driver "joystick"
Option "StartKeysEnabled" "False" #Disable mouse
Option "StartMouseEnabled" "False" #support
EndSection
3. Logout, then start a new session. Pressing buttons and moving analog sticks on gamepads will no longer mess with the desktop cursor. This fix is for X11. I have yet to find a fix for this on Plasma Wayland. If I do, then I'll post it here.
EDIT: Applying this fix apparently breaks Plasma Wayland. I get kicked back to the SDDM login screen after inputting the password. If anyone could shed some light into this matter, I'd appreciate it.
EDIT 2: Gamepad issue DOES NOT occur on Plasma Wayland by default (without the above fix). So if you are going to use a gamepad on MX-23 KDE for gaming, then you must log into the Wayland session. It will effectively cancel out the above solution unless you intend to use X11 only. To install Wayland session: sudo apt install plasma-workspace-wayland
Log out, then select Plasma Wayland on the session drop-down menu on the lower left corner of SDDM.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 9:33 am
by dolphin_oracle
operadude wrote: ↑Tue May 30, 2023 7:48 am
operadude wrote: ↑Tue May 30, 2023 7:01 am
Thanks @dolphin_oracle :
I really like the logout sound, so thanks for looking into it.
Please point me in the right direction, if I can help with this!
@dolphin_oracle :
Just remembered:
I think MX-23 Alpha2 (Xfce, x64) has the logout sound.
I'll double-check.
Don't know if that helps you.
Let me know if I can help in any way!
the root problem is that Xfce does not actually support the login/logout event sounds. So we work around it.
so the way the original setup worked, the logout sound was played by an "autostart" file that is triggered by logout/reboot/shutdown. The problem as I see it is that with pipewire its very likely teh sound server will be shutdown before the logout sound is played. during alpha we had reports that the logout sound never played despite being configured.
So I removed the feature because I would rather not have it than have it broken.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 9:48 am
by Joseph DeGarmo
@dolphin-oracle Can you install the Wayland session into the build for the KDE version? This will save users the trouble of manually installing the Wayland session on Plasma. You don't have to set Plasma to default to Wayland, but it would be cool if you decide to do that. It will significantly help gamers who use gamepads on MX KDE according to the comment I posted above.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 11:56 am
by lordmmx
I tried posting my own thread but was told to use this thread so I installed mx Linux beta 1 on Mt dual pentium 3 box and everything went well until I tried to update it I get an error that I need sse2 is this a upstream error or is there a way around it?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 12:01 pm
by asqwerth
lordmmx wrote: ↑Tue May 30, 2023 11:56 am
I tried posting my own thread but was told to use this thread so I installed mx Linux beta 1 on Mt dual pentium 3 box and everything went well until I tried to update it I get an error that I need sse2 is this a upstream error or is there a way around it?
Please post your Quick System Info, and the error message.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 12:49 pm
by siamhie
Melber wrote: ↑Tue May 30, 2023 2:58 am
siamhie wrote: ↑Sun May 28, 2023 6:42 pm
...Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
Did you try manually editing these entries in
~/gtkrc-2.0
Code: Select all
gtk-cursor-theme-name="DMZ-Black"
gtk-cursor-theme-size=0
and
~/.config/gtk-3.0/settings.ini ?
Code: Select all
gtk-cursor-theme-name=DMZ-Black
gtk-cursor-theme-size=0
@Melber All I have in the gtk-2.0 directory is this
Code: Select all
siamhie@mxflux23:~/.config/gtk-2.0
$ ls -a
. .. gtkfilechooser.ini
I've removed lxappearance and its conf files. The way I now have to setup my mouse theme is to first run "sudo update-alternatives --config x-cursor-theme" and select a theme.
I then edit ~/.config/gtk-3.0/settings.ini and change the gtk-cursor-theme-name entry to match the x-cursor-theme selection. That way all windows will have the same mouse pointer.
In this screenshot, if I move the mouse pointer into the browser window it will change from yellow to red because the cursor-theme entry is set to oxy-red.
Seems much easier to let lxappearance setup the mouse theme so it carries across all windows. Plus it has a preview of the cursor.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 1:09 pm
by siamhie
ceeslans wrote: ↑Tue May 30, 2023 7:36 am
Yeah, might be. If I'm not mistaken, @siamhie was also running a lower resolution when reporting same issue.
My screen has 1920x1080 resolution...
@ceeslans No issue here. Running a 2560x1440 resolution.
I am having an odd quirk tho. I have the dock auto hidden at the top center and when I mouse over the dock it shows as it should
but whenever I refresh the desktop I get a second dock showing at the top left corner that disappears quickly.
I did changed my Refresh command back to "fluxbox-remote restart" so I'm not sure if that might be the issue.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 1:13 pm
by operadude
dolphin_oracle wrote: ↑Tue May 30, 2023 9:33 am
operadude wrote: ↑Tue May 30, 2023 7:48 am
operadude wrote: ↑Tue May 30, 2023 7:01 am
Thanks @dolphin_oracle :
I really like the logout sound, so thanks for looking into it.
Please point me in the right direction, if I can help with this!
@dolphin_oracle :
Just remembered:
I think MX-23 Alpha2 (Xfce, x64) has the logout sound.
I'll double-check.
Don't know if that helps you.
Let me know if I can help in any way!
the root problem is that Xfce does not actually support the login/logout event sounds. So we work around it.
so the way the original setup worked, the logout sound was played by an "autostart" file that is triggered by logout/reboot/shutdown. The problem as I see it is that with pipewire its very likely teh sound server will be shutdown before the logout sound is played. during alpha we had reports that the logout sound never played despite being configured.
So I removed the feature because I would rather not have it than have it broken.
Ahhh...Too Bad
I really liked that nice "Borealis" sound letting me know that it's time for Biological Halt. Like Being Tucked-In!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:07 pm
by siamhie
@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.
pipewire2.png
Seems wireplumber isn't starting again.
This is from my systemctl status
Code: Select all
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1655 lightdm --session-child 13 16
│ ├─1684 fluxbox
│ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1795 compton
│ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1806 nm-applet
│ ├─1826 /usr/libexec/gvfsd
│ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─2008 xfce4-clipman
│ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
│ ├─2021 /usr/libexec/xdg-desktop-portal
│ ├─2026 /usr/libexec/xdg-document-portal
│ ├─2030 /usr/libexec/xdg-permission-store
│ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
│ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2065 corectrl
│ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2282 conky -c /home/siamhie/.conky/R8/r8
│ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2839 /usr/bin/thunar file:///home/siamhie/
│ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
│ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
│ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
│ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
│ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
│ ├─2877 /usr/libexec/gvfsd-metadata
│ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
│ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
│ ├─3960 xfce4-terminal
│ ├─3982 bash
│ ├─4343 systemctl status
│ └─4344 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
├─init.scope
│ ├─1664 /lib/systemd/systemd --user
│ └─1665 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1682 /usr/bin/pipewire-pulse
└─pipewire.service
└─1680 /usr/bin/pipewire
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
bogomips: 124804
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:24 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 2:07 pm
@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.
pipewire2.png
Seems wireplumber isn't starting again.
This is from my systemctl status
Code: Select all
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1655 lightdm --session-child 13 16
│ ├─1684 fluxbox
│ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1795 compton
│ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1806 nm-applet
│ ├─1826 /usr/libexec/gvfsd
│ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─2008 xfce4-clipman
│ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
│ ├─2021 /usr/libexec/xdg-desktop-portal
│ ├─2026 /usr/libexec/xdg-document-portal
│ ├─2030 /usr/libexec/xdg-permission-store
│ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
│ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2065 corectrl
│ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2282 conky -c /home/siamhie/.conky/R8/r8
│ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2839 /usr/bin/thunar file:///home/siamhie/
│ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
│ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
│ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
│ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
│ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
│ ├─2877 /usr/libexec/gvfsd-metadata
│ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
│ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
│ ├─3960 xfce4-terminal
│ ├─3982 bash
│ ├─4343 systemctl status
│ └─4344 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
├─init.scope
│ ├─1664 /lib/systemd/systemd --user
│ └─1665 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1682 /usr/bin/pipewire-pulse
└─pipewire.service
└─1680 /usr/bin/pipewire
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
bogomips: 124804
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:24 pm
by siamhie
@dolphin_oracle In the meantime I'm using a quick and dirty fix. I'm manually starting wireplumber at boot for now in my startup file. Sound works again.
Code: Select all
#start pipewire before volumeicon so unmute works
wireplumber &
pipewire-start
sleep 2
volumeicon -c volumeicon-fluxbox &
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:44 pm
by Melber
siamhie wrote: ↑Tue May 30, 2023 12:49 pm
Melber wrote: ↑Tue May 30, 2023 2:58 am
siamhie wrote: ↑Sun May 28, 2023 6:42 pm
...Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
Did you try manually editing these entries in
~/gtkrc-2.0
Code: Select all
gtk-cursor-theme-name="DMZ-Black"
gtk-cursor-theme-size=0
and
~/.config/gtk-3.0/settings.ini ?
Code: Select all
gtk-cursor-theme-name=DMZ-Black
gtk-cursor-theme-size=0
@Melber All I have in the gtk-2.0 directory is this
Code: Select all
siamhie@mxflux23:~/.config/gtk-2.0
$ ls -a
. .. gtkfilechooser.ini
...
@siamhie gtkrc-2.0 is a file that lives in the home directory.
Has pretty much the same content as ~/.config/gtk-3.0/settings.ini, except that the theme names are quoted
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:47 pm
by operadude
kc1di wrote: ↑Tue May 30, 2023 6:54 am
trying out MX23-KDE. so far looks good will test more today. But no major problems as yet.
good work :)
@operadude. Nice radio :)
@kc1di :Thanks!
Dig the Analog, Dude!
Continuing to test Beta-1 (Xfce). So far, so good!
Also, Loving the Logo -- @ Startup & Shutdown: Nice effects!
Don't know if I mentioned it earlier, but very cool modified apt Updater!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:58 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 2:24 pm
please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.
@dolphin_oracle It doesn't get loaded at boot.
Code: Select all
systemctl --type=service
UNIT LOAD ACTIVE SUB DESCRIPTION >
accounts-daemon.service loaded active running Accounts Service
acpi-fakekey.service loaded active running ACPI fakekey daemon
acpid.service loaded active running ACPI event daemon
alsa-restore.service loaded active exited Save/Restore Sound Card State
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
blk-availability.service loaded active exited Availability of block devices
bluetooth.service loaded active running Bluetooth service
console-setup.service loaded active exited Set console font and keymap
cpufrequtils.service loaded active exited LSB: set CPUFreq kernel parameters
cron.service loaded active running Regular background program processing daemon
cups-browsed.service loaded active running Make remote CUPS printers available locally
dbus.service loaded active running D-Bus System Message Bus
emby-server.service loaded active running Emby Server is a personal media server with apps>
getty@tty1.service loaded active running Getty on tty1
haveged.service loaded active running Entropy Daemon based on the HAVEGE algorithm
hwclock-mx.service loaded active exited save system clock if not running live
ifupdown-pre.service loaded active exited Helper to synchronize boot up for ifupdown
keyboard-setup.service loaded active exited Set the console keyboard layout
kmod-static-nodes.service loaded active exited Create List of Static Device Nodes
lightdm.service loaded active running Light Display Manager
lm-sensors.service loaded active exited Initialize hardware monitoring sensors
loadcpufreq.service loaded active exited LSB: Load kernel modules needed to enable cpufre>
lvm2-monitor.service loaded active exited Monitoring of LVM2 mirrors, snapshots etc. using>
ModemManager.service loaded active running Modem Manager
network-manager.service loaded active running LSB: network connection manager
networking.service loaded active exited Raise network interfaces
NetworkManager.service loaded failed failed Network Manager
nfs-blkmap.service loaded active running pNFS block layout mapping daemon
nfs-idmapd.service loaded active running NFSv4 ID-name mapping service
nfs-mountd.service loaded active running NFS Mount Daemon
nfs-server.service loaded active exited NFS server and services
nfsdcld.service loaded active running NFSv4 Client Tracking Daemon
ntpsec.service loaded active running Network Time Service
openvpn.service loaded active exited OpenVPN service
plymouth-quit-wait.service loaded active exited Hold until boot process finishes up
plymouth-read-write.service loaded active exited Tell Plymouth To Write Out Runtime Data
plymouth-start.service loaded active exited Show Plymouth Boot Screen
polkit.service loaded active running Authorization Manager
rc-local.service loaded active exited /etc/rc.local Compatibility
rpc-statd-notify.service loaded active exited Notify NFS peers of a restart
rpc-statd.service loaded active running NFS status monitor for NFSv2/3 locking.
rpcbind.service loaded active running RPC bind portmap service
rsyslog.service loaded active running System Logging Service
smartmontools.service loaded active running Self Monitoring and Reporting Technology (SMART)>
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running User Login Management
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-sysusers.service loaded active exited Create System Users
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited Coldplug All udev Devices
systemd-udevd.service loaded active running Rule-based Manager for Device Events and Files
systemd-update-utmp.service loaded active exited Record System Boot/Shutdown in UTMP
systemd-user-sessions.service loaded active exited Permit User Sessions
tlp.service loaded active exited TLP system startup/shutdown
udisks2.service loaded active running Disk Manager
ufw.service loaded active exited Uncomplicated firewall
unattended-upgrades.service loaded active running Unattended Upgrades Shutdown
user-runtime-dir@1000.service loaded active exited User Runtime Directory /run/user/1000
user@1000.service loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
I also can't get it to start.
Code: Select all
$ systemctl start wireplumber.service
Failed to start wireplumber.service: Unit wireplumber.service not found.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:00 pm
by dolphin_oracle
its a user service, like pipewire. which also isn't in your list @siamhie
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:13 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 3:00 pm
its a user service, like pipewire. which also isn't in your list @siamhie
@dolphin_oracle pipewire shows at the bottom. Is that what you were referring to?
Code: Select all
siamhie@mxflux23:~
$ systemctl status
● mxflux23
State: degraded
Units: 399 loaded (incl. loaded aliases)
Jobs: 0 queued
Failed: 1 units
Since: Tue 2023-05-30 05:09:26 PDT; 7h ago
systemd: 1:252.6-1mx23+1
Tainted: local-hwclock
CGroup: /
├─init.scope
│ └─1 /lib/systemd/systemd
├─system.slice
│ ├─ModemManager.service
│ │ └─1115 /usr/sbin/ModemManager
│ ├─accounts-daemon.service
│ │ └─1064 /usr/libexec/accounts-daemon
│ ├─acpi-fakekey.service
│ │ └─1065 /usr/sbin/acpi_fakekeyd -f
│ ├─acpid.service
│ │ └─1066 /usr/sbin/acpid
│ ├─avahi-daemon.service
│ │ ├─1070 "avahi-daemon: running [mxflux23.local]"
│ │ └─1074 "avahi-daemon: chroot helper"
│ ├─bluetooth.service
│ │ └─1072 /usr/libexec/bluetooth/bluetoothd
│ ├─cron.service
│ │ └─1073 /usr/sbin/cron -f
│ ├─cups-browsed.service
│ │ └─1400 /usr/sbin/cups-browsed
│ ├─dbus.service
│ │ ├─1075 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
│ │ └─2180 /usr/libexec/corectrl/corectrl_helper
│ ├─emby-server.service
│ │ └─1401 /opt/emby-server/system/EmbyServer -programdata /var/lib/emby -ffdetect /opt/emby-server/bin/ffdetect -ffmpeg /opt/emby-se>
│ ├─haveged.service
│ │ └─1042 /usr/sbin/haveged --Foreground --verbose=1
│ ├─lightdm.service
│ │ ├─1414 /usr/sbin/lightdm
│ │ └─1437 /usr/lib/xorg/Xorg -dpi "\$DPI" :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
│ ├─network-manager.service
│ │ └─1176 /usr/sbin/NetworkManager
│ ├─nfs-blkmap.service
│ │ └─1060 /usr/sbin/blkmapd
│ ├─nfs-idmapd.service
│ │ └─1062 /usr/sbin/rpc.idmapd
│ ├─nfs-mountd.service
│ │ └─1411 /usr/sbin/rpc.mountd
│ ├─nfsdcld.service
│ │ └─1063 /usr/sbin/nfsdcld
│ ├─ntpsec.service
│ │ └─2007 /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
│ ├─polkit.service
│ │ └─1083 /usr/lib/polkit-1/polkitd --no-debug
│ ├─rpc-statd.service
│ │ └─1412 /sbin/rpc.statd
│ ├─rpcbind.service
│ │ └─1053 /sbin/rpcbind -f -w
│ ├─rsyslog.service
│ │ └─1087 /usr/sbin/rsyslogd -n -iNONE
│ ├─smartmontools.service
│ │ └─1088 /usr/sbin/smartd -n
│ ├─system-getty.slice
│ │ └─getty@tty1.service
│ │ └─1448 /sbin/agetty -o "-p -- \\u" --noclear - linux
│ ├─systemd-journald.service
│ │ └─512 /lib/systemd/systemd-journald
│ ├─systemd-logind.service
│ │ └─1090 /lib/systemd/systemd-logind
│ ├─systemd-udevd.service
│ │ └─udev
│ │ └─531 /lib/systemd/systemd-udevd
│ ├─udisks2.service
│ │ └─1091 /usr/libexec/udisks2/udisksd
│ ├─unattended-upgrades.service
│ │ └─1410 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
│ └─wpa_supplicant.service
│ └─1117 /sbin/wpa_supplicant -u -s -O "DIR=/run/wpa_supplicant GROUP=netdev"
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1650 lightdm --session-child 13 16
│ ├─1679 fluxbox
│ ├─1716 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1717 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1770 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1789 compton
│ ├─1796 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1797 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1801 nm-applet
│ ├─1822 /usr/libexec/gvfsd
│ ├─1827 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─1996 xfce4-clipman
│ ├─1997 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2004 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=>
│ ├─2017 /usr/libexec/xdg-desktop-portal
│ ├─2022 /usr/libexec/xdg-document-portal
│ ├─2026 /usr/libexec/xdg-permission-store
│ ├─2032 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000/doc
│ ├─2038 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2052 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2054 corectrl
│ ├─2063 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2065 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2302 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2363 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2477 /bin/bash /tmp/conky-manager2-siamhie/16854737871749932149.sh
│ ├─2478 conky -c /home/siamhie/.conky/R8/r8
│ ├─2535 /usr/libexec/gvfsd-metadata
│ ├─2558 xfce4-terminal
│ ├─2580 bash
│ ├─2641 systemctl status
│ └─2642 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2069 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-directory=/run/user/1000/keyring
├─init.scope
│ ├─1659 /lib/systemd/systemd --user
│ └─1660 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1677 /usr/bin/pipewire-pulse
└─pipewire.service
└─1675 /usr/bin/pipewire
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:23 pm
by Jerry3904
I'm still fooling around from time to time with that autohide dock problem, which annoys me. I used dockmaker to match the background and border to the color of the sand on the bottom of the screen. There is still a blue line around the dock itself:
quickshot_230530_151630.png
@Melber is that from you? If yes, I wonder if that might be causing these sporadic problems.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:27 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 3:13 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 3:00 pm
its a user service, like pipewire. which also isn't in your list @siamhie
@dolphin_oracle pipewire shows at the bottom. Is that what you were referring to?
Code: Select all
siamhie@mxflux23:~
$ systemctl status
● mxflux23
State: degraded
Units: 399 loaded (incl. loaded aliases)
Jobs: 0 queued
Failed: 1 units
Since: Tue 2023-05-30 05:09:26 PDT; 7h ago
systemd: 1:252.6-1mx23+1
Tainted: local-hwclock
CGroup: /
├─init.scope
│ └─1 /lib/systemd/systemd
├─system.slice
│ ├─ModemManager.service
│ │ └─1115 /usr/sbin/ModemManager
│ ├─accounts-daemon.service
│ │ └─1064 /usr/libexec/accounts-daemon
│ ├─acpi-fakekey.service
│ │ └─1065 /usr/sbin/acpi_fakekeyd -f
│ ├─acpid.service
│ │ └─1066 /usr/sbin/acpid
│ ├─avahi-daemon.service
│ │ ├─1070 "avahi-daemon: running [mxflux23.local]"
│ │ └─1074 "avahi-daemon: chroot helper"
│ ├─bluetooth.service
│ │ └─1072 /usr/libexec/bluetooth/bluetoothd
│ ├─cron.service
│ │ └─1073 /usr/sbin/cron -f
│ ├─cups-browsed.service
│ │ └─1400 /usr/sbin/cups-browsed
│ ├─dbus.service
│ │ ├─1075 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
│ │ └─2180 /usr/libexec/corectrl/corectrl_helper
│ ├─emby-server.service
│ │ └─1401 /opt/emby-server/system/EmbyServer -programdata /var/lib/emby -ffdetect /opt/emby-server/bin/ffdetect -ffmpeg /opt/emby-se>
│ ├─haveged.service
│ │ └─1042 /usr/sbin/haveged --Foreground --verbose=1
│ ├─lightdm.service
│ │ ├─1414 /usr/sbin/lightdm
│ │ └─1437 /usr/lib/xorg/Xorg -dpi "\$DPI" :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
│ ├─network-manager.service
│ │ └─1176 /usr/sbin/NetworkManager
│ ├─nfs-blkmap.service
│ │ └─1060 /usr/sbin/blkmapd
│ ├─nfs-idmapd.service
│ │ └─1062 /usr/sbin/rpc.idmapd
│ ├─nfs-mountd.service
│ │ └─1411 /usr/sbin/rpc.mountd
│ ├─nfsdcld.service
│ │ └─1063 /usr/sbin/nfsdcld
│ ├─ntpsec.service
│ │ └─2007 /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
│ ├─polkit.service
│ │ └─1083 /usr/lib/polkit-1/polkitd --no-debug
│ ├─rpc-statd.service
│ │ └─1412 /sbin/rpc.statd
│ ├─rpcbind.service
│ │ └─1053 /sbin/rpcbind -f -w
│ ├─rsyslog.service
│ │ └─1087 /usr/sbin/rsyslogd -n -iNONE
│ ├─smartmontools.service
│ │ └─1088 /usr/sbin/smartd -n
│ ├─system-getty.slice
│ │ └─getty@tty1.service
│ │ └─1448 /sbin/agetty -o "-p -- \\u" --noclear - linux
│ ├─systemd-journald.service
│ │ └─512 /lib/systemd/systemd-journald
│ ├─systemd-logind.service
│ │ └─1090 /lib/systemd/systemd-logind
│ ├─systemd-udevd.service
│ │ └─udev
│ │ └─531 /lib/systemd/systemd-udevd
│ ├─udisks2.service
│ │ └─1091 /usr/libexec/udisks2/udisksd
│ ├─unattended-upgrades.service
│ │ └─1410 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
│ └─wpa_supplicant.service
│ └─1117 /sbin/wpa_supplicant -u -s -O "DIR=/run/wpa_supplicant GROUP=netdev"
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1650 lightdm --session-child 13 16
│ ├─1679 fluxbox
│ ├─1716 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1717 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1770 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1789 compton
│ ├─1796 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1797 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1801 nm-applet
│ ├─1822 /usr/libexec/gvfsd
│ ├─1827 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─1996 xfce4-clipman
│ ├─1997 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2004 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=>
│ ├─2017 /usr/libexec/xdg-desktop-portal
│ ├─2022 /usr/libexec/xdg-document-portal
│ ├─2026 /usr/libexec/xdg-permission-store
│ ├─2032 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000/doc
│ ├─2038 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2052 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2054 corectrl
│ ├─2063 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2065 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2302 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2363 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2477 /bin/bash /tmp/conky-manager2-siamhie/16854737871749932149.sh
│ ├─2478 conky -c /home/siamhie/.conky/R8/r8
│ ├─2535 /usr/libexec/gvfsd-metadata
│ ├─2558 xfce4-terminal
│ ├─2580 bash
│ ├─2641 systemctl status
│ └─2642 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2069 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-directory=/run/user/1000/keyring
├─init.scope
│ ├─1659 /lib/systemd/systemd --user
│ └─1660 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1677 /usr/bin/pipewire-pulse
└─pipewire.service
└─1675 /usr/bin/pipewire
I honestly don't understand why wireplumber doesn't start on fluxbox/systemd. unless there is something that happens on the full DEs (kde, xfce) that doesn't happen when starting fluxbox. off the top of my head I don't know what that would be. In my tests, even going just to a console, the audio services all started under systemd at login.
previously the pipewire-start script was force-loading wireplumber in all cases. I guess it can still do that, but under KDE and Xfce it was killing an existing running service and starting a new one.
will investigate some more.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:43 pm
by dolphin_oracle
@siamhie is dbus-user-session installed on the fluxbox iso?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:50 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 3:27 pm
I honestly don't understand why wireplumber doesn't start on fluxbox/systemd. unless there is something that happens on the full DEs (kde, xfce) that doesn't happen when starting fluxbox. off the top of my head I don't know what that would be. In my tests, even going just to a console, the audio services all started under systemd at login.
previously the pipewire-start script was force-loading wireplumber in all cases. I guess it can still do that, but under KDE and Xfce it was killing an existing running service and starting a new one.
will investigate some more.
@dolphin_oracle Would it just be easier to have wireplumber placed in fluxbox's startup script. That way the other desktops (XFCE, KDE) won't get affected? I wonder if other fluxbox testers are experiencing this.
Code: Select all
#start pipewire before volumeicon so unmute works
#wireplumber &
pipewire-start
sleep 2
volumeicon -c volumeicon-fluxbox &
Maybe it might be my onboard sound. MSI B550-A Pro motherboard. Just thinking out loud.
Code: Select all
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:53 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 3:43 pm
@siamhie is dbus-user-session installed on the fluxbox iso?
@dolphin_oracle How would I check that? I did flash the ISO with MX Live USB Maker.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:55 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 3:53 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 3:43 pm
@siamhie is dbus-user-session installed on the fluxbox iso?
@dolphin_oracle How would I check that? I did flash the ISO with MX Live USB Maker.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 4:28 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 3:50 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 3:27 pm
I honestly don't understand why wireplumber doesn't start on fluxbox/systemd. unless there is something that happens on the full DEs (kde, xfce) that doesn't happen when starting fluxbox. off the top of my head I don't know what that would be. In my tests, even going just to a console, the audio services all started under systemd at login.
previously the pipewire-start script was force-loading wireplumber in all cases. I guess it can still do that, but under KDE and Xfce it was killing an existing running service and starting a new one.
will investigate some more.
@dolphin_oracle Would it just be easier to have wireplumber placed in fluxbox's startup script. That way the other desktops (XFCE, KDE) won't get affected? I wonder if other fluxbox testers are experiencing this.
Code: Select all
#start pipewire before volumeicon so unmute works
#wireplumber &
pipewire-start
sleep 2
volumeicon -c volumeicon-fluxbox &
Maybe it might be my onboard sound. MSI B550-A Pro motherboard. Just thinking out loud.
Code: Select all
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
since the pipewire-start script starts up wireplumber, no, that would put two entries in effect when booting with sysVinit.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 4:33 pm
by entropyfoe
Wow, just wow. This is a great win for the dev team, the beta is wonderful.
I downloaded the iso (XFCE 64 bit) , md5 was good, burned to a 4G stick with the MX live USB creator under MX 21.
Booted fine, the internet and sound worked live, so time to hit the install button to my testing partition, grub to root. Installed fine, I remembered to enable the existing swap. I like that start animation of the MX logo, looks good.
Did an immediate synaptic upgrades, 63 of them. I then installed my favorite applications, got all but two, not showstoppers, this adds 154 packages with all the dependencies.
Missing for me is jerry - a non essential chess program as scid can do most of that
Missing is fsearch, that is a great tool, it will probably get packaged in due time.
Nice touch stock fish goes from version 12 to 15.
That is about +130 Elo points ! :
Installed the NVIDIA driver with the MX tool, worked flawlessly, getting the 470.182.03-1.
Rebooted, into MX 21 to update-grub, and when I boot the new MX 23 is in the grub menu, I select it and all is working.
During the boot I see rrand is not reliable in this platform. Not an MX problem, but the error message is way shorter than in MX 21 !
Nice touch, the 6.1 kernel. [edit] that is a LTS kernel.
Then I start with my list of tweaks
Code: Select all
1. Enable my data disk in the disk manager
2. Change my wall paper
3. Fire up synaptic and load about 30 programs (adds to maybe 160 packages with all dependencies) Such as audacity, k3b, ksnip, bleachbit, ripperx, handbrake, scid, stockfish, eboard, espeak....I really should automate this with aptik !
4. Run synaptic to get all updates
5.Widen the panel, change the clock so it shows seconds
6. Install the NVidia driver with the MX Package Installer
7. Switch conky to the modified antiX conky
8. Set up a desktop short cut to the data drive
9. Run bleachbit to clear all the post install stuff out
10. Reboot and test stability after all the up dates
11. Configure Firefox, set home page to duckduckgo, set downloads to go to a folder on the data drive, import bookmarks, add noscript
12. Disable sudo -MX Tweak > Other tab > radial button at the bottom labeled accordingly
13. In power management set so no log-in is required from suspend
All went well except after a reboot the desktop wall paper came back as the stock instead of the one I had installed, I have seen this on other new installs a few time, I will repeat and investigate.
But this will be a daily driver for me for at least a few days with further testing and work loads.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: PRIME X470-PRO v: Rev X.0x serial: <superuser required>
UEFI-[Legacy]: American Megatrends v: 5204 date: 07/29/2019
CPU:
Info: model: AMD Ryzen 5 3600X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701013
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB
desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2151 high: 2208 min/max: 2200/4409 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 1985 2: 2208 3: 1863 4: 2200 5: 2196 6: 2195
7: 2200 8: 2200 9: 2176 10: 2196 11: 2200 12: 2200 bogomips: 91028
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 710] vendor: Micro-Star MSI driver: nvidia v: 470.182.03
non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Fermi 2 code: GF119/GK208
process: TSMC 28nm built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 09:00.0
chip-ID: 10de:128b class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 96 size: 509x286mm (20.04x11.26")
diag: 584mm (22.99") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 470.182.03 renderer: NVIDIA GeForce GT 710/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: NVIDIA GK208 HDMI/DP Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 09:00.1 chip-ID: 10de:0e0f class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.25 TiB used: 566.55 GiB (44.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 2B2QEXM7 temp: 36.9 C scheme: MBR
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1B6Q scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 840 PRO Series size: 119.24 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 5B0Q
scheme: MBR
Partition:
ID-1: / raw-size: 88.35 GiB size: 86.41 GiB (97.80%) used: 8.15 GiB (9.4%) fs: ext4
dev: /dev/nvme0n1p4 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 32.23 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p2 maj-min: 259:2
Sensors:
System Temperatures: cpu: 48.0 C mobo: 32.0 C gpu: nvidia temp: 49 C
Fan Speeds (RPM): cpu: 602 case-1: 0 case-2: 941 case-3: 888 gpu: nvidia fan: 50%
Power: 12v: 12.16 5v: N/A 3.3v: N/A vbat: N/A
Repos:
Packages: pm: dpkg pkgs: 2301 libs: 1234 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 283 Uptime: 26m wakeups: 2 Memory: 31.26 GiB used: 2.2 GiB (7.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 4:35 pm
by dolphin_oracle
@siamhie probably is almost certainly the missing dbus-user-session.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 4:49 pm
by Jerry3904
dolphin_oracle wrote: ↑Tue May 30, 2023 4:35 pm
@siamhie probably is almost certainly the missing dbus-user-session.
Is that something you take care of or should I inform
@m_pav about that?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 5:33 pm
by Melber
Jerry3904 wrote: ↑Tue May 30, 2023 3:23 pm
I'm still fooling around from time to time with that autohide dock problem, which annoys me. I used dockmaker to match the background and border to the color of the sand on the bottom of the screen. There is still a blue line around the dock itself:
...
@Melber is that from you? If yes, I wonder if that might be causing these sporadic problems.
I don't think the border is the issue, but the fluxbox style may be.
The border around the dock is set in the MX-comfort fluxbox style. I tried a copy without the border and it behaved the same way.
From my testing the following fluxbox styles work with dock autohide and any dock placement
bloe
bora_blue
bora_black
bora_green
carp
debian-dark
green-tea
ostrich
zimek_bisque
zimek_darkblue
zimek_green
All other styles (including the MX-comfort styles) only show a hidden dock with the placement is set to RightTop, RightCenter or RightBottom.
With any other placement the hidden dock refuses to slide out.
Had a quick scan over the various fluxbox style theme.cfg files but no difference between working and not-working themes jumped out at me.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 5:39 pm
by ceeslans
dolphin_oracle wrote: ↑Tue May 30, 2023 4:35 pm
@siamhie probably is almost certainly the missing dbus-user-session.
Installing dbus-user-session solves the issue MXFluxbox in systemd. Now volumeicon is showing up in systemtray and sound is back.
No need to autostart wireplumber in ~/.fluxbox/startup
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 5:59 pm
by Jerry3904
Thanks. I suspect we're looking at a downside of the new idesk in how it (mis-)handles the slit.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:15 pm
by dolphin_oracle
Jerry3904 wrote: ↑Tue May 30, 2023 4:49 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 4:35 pm
@siamhie probably is almost certainly the missing dbus-user-session.
Is that something you take care of or should I inform @m_pav about that?
I'll take care of it
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:17 pm
by dolphin_oracle
Jerry3904 wrote: ↑Tue May 30, 2023 5:59 pm
Thanks. I suspect we're looking at a downside of the new idesk in how it (mis-)handles the slit.
idesk doesn't handle the slit, but it might be covering it. you could try putting idesk on a lower layer maybe.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:20 pm
by Jerry3904
I tried all the layers for the slit, with no change. Will look at the layer for idesk, thanks, though the fact that some locations are OK and others not makes me not optimistic.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 6:50 pm
by luigi lins
I checked the video on youtube version 23 beta is wonderful.
Libre office calc latest this great I like it
congratulations to the top developers
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:00 pm
by Adrian
ceeslans wrote: ↑Tue May 30, 2023 4:52 am
Still having issues with the updated mx-dockmaker.
When selecting a
file, then mx-dockmaker will create a correct wmalauncher command line in the target *.mxdk script :
Code: Select all
wmalauncher --desktop-file thunar.desktop --background-color "#ff4a4a" --hover-background-color "#ff0000" --border-color "#2a2a2a" --hover-border-color "#8a8a8a" --window-size 48& sleep 0.1
But when instead setting a
command and selecting an appropriate
icon (as shown in below screenshot), then that custom command is written as
icon name to the *.mxdk file :
Code: Select all
wmalauncher --command pkexec Thunar --icon pkexec Thunar --background-color "#ff4a4a" --hover-background-color "#ff0000" --border-color "#2a2a2a" --hover-border-color "#8a8a8a" --window-size 48& sleep 0.1
... and subsequently, that entry will not appear in the dock.
Hope this can be resolved by @Adrian ?
Thanks for the price bug report, it should be fixed with the upcoming package upgrade.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:05 pm
by dolphin_oracle
Jerry3904 wrote: ↑Tue May 30, 2023 6:20 pm
I tried all the layers for the slit, with no change. Will look at the layer for idesk, thanks, though the fact that some locations are OK and others not makes me not optimistic.
I killed idesk. I think the problem is the slit autohide function in broke.
FYI slit autohide is fine under fluxbox 1.3.5.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:10 pm
by Jerry3904
I looked through the man file for wmalauncher that is handling this and actually tried inserting a couple of options but no luck yet
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:13 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 3:55 pm
siamhie wrote: ↑Tue May 30, 2023 3:53 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 3:43 pm
@siamhie is dbus-user-session installed on the fluxbox iso?
@dolphin_oracle How would I check that? I did flash the ISO with MX Live USB Maker.
@dolphin_oracle I booted the live ISO and get this message. (same thing from my desktop afterwards)
Code: Select all
demo@mx1:~
$ apt-policy dbus-user-session
bash: apt-policy: command not found
demo@mx1:~
$ sudo apt-policy dbus-user-session
[sudo] password for demo:
sudo: apt-policy: command not found
demo@mx1:~
$
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:22 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 7:13 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 3:55 pm
siamhie wrote: ↑Tue May 30, 2023 3:53 pm
@dolphin_oracle How would I check that? I did flash the ISO with MX Live USB Maker.
@dolphin_oracle I booted the live ISO and get this message. (same thing from my desktop afterwards)
Code: Select all
demo@mx1:~
$ apt-policy dbus-user-session
bash: apt-policy: command not found
demo@mx1:~
$ sudo apt-policy dbus-user-session
[sudo] password for demo:
sudo: apt-policy: command not found
demo@mx1:~
$
sorry typo.
Code: Select all
apt cache policy dbus-user-session
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:39 pm
by siamhie
@dolphin_oracle Shows not installed on the live ISO.
Code: Select all
demo@mx1:~
$ apt cache policy dbus-user-session
E: Invalid operation cache
demo@mx1:~
$ apt-cache policy dbus-user-session
dbus-user-session:
Installed: (none)
Candidate: (none)
Version table:
demo@mx1:~
$
Same thing once booted up to desktop (which makes sense if it's not on the ISO).
Code: Select all
siamhie@mxflux23:~
$ apt-cache policy dbus-user-session
dbus-user-session:
Installed: (none)
Candidate: 1.14.6-1
Version table:
1.14.6-1 500
500 http://deb.debian.org/debian bookworm/main amd64 Packages
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:55 pm
by siamhie
@dolphin_oracle Got it working thanks to your suggestion to check the dbus-user-session.
Opened MXPI and installed dbus-user-session (not installed by default). Then removed wireplumber from the fluxbox startup script and rebooted. Sound is working again.
Code: Select all
├─pipewire-pulse.service
│ └─1698 /usr/bin/pipewire-pulse
├─pipewire.service
│ └─1696 /usr/bin/pipewire
├─wireplumber.service
│ └─1697 /usr/bin/wireplumber
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 7:56 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 7:55 pm
@dolphin_oracle Got it working thanks to your suggestion to check the dbus-user-session.
Opened MXPI and installed dbus-user-session (not installed by default). Then removed wireplumber from the fluxbox startup script and rebooted. Sound is working again.
Code: Select all
├─pipewire-pulse.service
│ └─1698 /usr/bin/pipewire-pulse
├─pipewire.service
│ └─1696 /usr/bin/pipewire
├─wireplumber.service
│ └─1697 /usr/bin/wireplumber
nice.
I'm updating the pipewire-setup-mx package to pull in dbus-user-session. you won't have to do anything.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 8:01 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 7:56 pm
siamhie wrote: ↑Tue May 30, 2023 7:55 pm
@dolphin_oracle Got it working thanks to your suggestion to check the dbus-user-session.
Opened MXPI and installed dbus-user-session (not installed by default). Then removed wireplumber from the fluxbox startup script and rebooted. Sound is working again.
nice.
I'm updating the pipewire-setup-mx package to pull in dbus-user-session. you won't have to do anything.
OK, sounds good (no pun intended
)
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 8:36 pm
by m_pav
Jerry3904 wrote: ↑Tue May 30, 2023 4:49 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 4:35 pm
@siamhie probably is almost certainly the missing dbus-user-session.
Is that something you take care of or should I inform @m_pav about that?
I just chrooted into the build-iso from Beta1 and sure enough it's not installed, however, it is installed in my VM in which I do nothing but install the updates then check the changelogs for each package and poke at a few things to see how/if they changed. Surprisingly, I haven't seen user-dbus-session at any time.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 8:38 pm
by dolphin_oracle
m_pav wrote: ↑Tue May 30, 2023 8:36 pm
Jerry3904 wrote: ↑Tue May 30, 2023 4:49 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 4:35 pm
@siamhie probably is almost certainly the missing dbus-user-session.
Is that something you take care of or should I inform @m_pav about that?
I just chrooted into the build-iso from Beta1 and sure enough it's not installed, however, it is installed in my VM in which I do nothing but install the updates then check the changelogs for each package and poke at a few things to see how/if they changed. Surprisingly, I haven't seen user-dbus-session at any time.
i've already pushed an update for pipewire-setup-mx. should hit the repos whenever tim can get to it.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 9:20 pm
by siamhie
@m_pav @dolphin_oracle I can confirm that dbus-user-session is not installed by default on the fluxbox alpha2 ISO but sounds do work.
The pipewire-start script in /usr/bin is also much different from the one we have currently.
Code: Select all
#/bin/bash
#first init check for pure systemd, no shim
INITCHECK=$(readlink /usr/sbin/init)
echo $INITCHECK
if [ "$INITCHECK" = "/lib/systemd/systemd" ]; then
exit 0
fi
#second init check for system-shim configuration
INITCHECK=$(/usr/bin/ps -p 1 -o cmd -h)
echo $INITCHECK
if [ "$INITCHECK" = "/lib/systemd/systemd" ]; then
exit 0
fi
#else start them up
echo "start pipewire"
/usr/bin/pipewire &
/usr/bin/pipewire-pulse &
/usr/bin/wireplumber &
exit 0s
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 9:35 pm
by Joseph DeGarmo
Can you install the Wayland session into the build for the KDE version? This will save users the trouble of manually installing the Wayland session on Plasma. You don't have to set Plasma to default to Wayland, but it would be cool if you decide to do that. It will significantly help gamers who use gamepads on MX KDE according to the comment I posted on Page 12.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:00 pm
by dolphin_oracle
siamhie wrote: ↑Tue May 30, 2023 9:20 pm
@m_pav @dolphin_oracle I can confirm that dbus-user-session is not installed by default on the fluxbox alpha2 ISO but sounds do work.
The pipewire-start script in /usr/bin is also much different from the one we have currently.
Code: Select all
#/bin/bash
#first init check for pure systemd, no shim
INITCHECK=$(readlink /usr/sbin/init)
echo $INITCHECK
if [ "$INITCHECK" = "/lib/systemd/systemd" ]; then
exit 0
fi
#second init check for system-shim configuration
INITCHECK=$(/usr/bin/ps -p 1 -o cmd -h)
echo $INITCHECK
if [ "$INITCHECK" = "/lib/systemd/systemd" ]; then
exit 0
fi
#else start them up
echo "start pipewire"
/usr/bin/pipewire &
/usr/bin/pipewire-pulse &
/usr/bin/wireplumber &
exit 0s
that's an old script, before updates. but yeah I think we got it now thank you for the report
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:11 pm
by entropyfoe
Xfce 64 bit
Contrary to some earlier posts, vlc is playing my videos.
Suspend works, waking in about 8 seconds.
Strawberry playing .mp3 and .wav files, seems like clementine -but different fruit.
So far all good. Stockfish 15 has been blasting with 8 threads within scid,
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:12 pm
by Joseph DeGarmo
Joseph DeGarmo wrote: ↑Tue May 30, 2023 9:35 pm
Can you install the Wayland session into the build for the KDE version? This will save users the trouble of manually installing the Wayland session on Plasma. You don't have to set Plasma to default to Wayland, but it would be cool if you decide to do that. It will significantly help gamers who use gamepads on MX KDE according to the comment I posted on Page 12.
Uh, HELLO???
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:21 pm
by dolphin_oracle
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:12 pm
Joseph DeGarmo wrote: ↑Tue May 30, 2023 9:35 pm
Can you install the Wayland session into the build for the KDE version? This will save users the trouble of manually installing the Wayland session on Plasma. You don't have to set Plasma to default to Wayland, but it would be cool if you decide to do that. It will significantly help gamers who use gamepads on MX KDE according to the comment I posted on Page 12.
Uh, HELLO???
we haven't discussed it.
but based on my experience with the KDE wayland session I'm more inclined to do the joystick override thing in xorg.conf.d
its strange that the file breaks the wayland session, but it surely does.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:38 pm
by siamhie
dolphin_oracle wrote: ↑Tue May 30, 2023 10:00 pm
that's an old script, before updates. but yeah I think we got it now thank you for the report
Got the update
@dolphin_oracle . Thank you.
pipewire.jpg
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:39 pm
by dolphin_oracle
@Joseph DeGarmo does making the joystick.conf modifications in /usr/share/X11/xorg.conf.d/50-joystick.conf solve the joystick problem without having the file in /etc/X11/xorg.conf.d? because the wayland session doesn't crash unless the file is present under /etc... rather than just modifying the basic config under /usr/share/X11
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:41 pm
by Joseph DeGarmo
dolphin_oracle wrote: ↑Tue May 30, 2023 10:39 pm
@Joseph DeGarmo does making the joystick.conf modifications in /usr/share/X11/xorg.conf.d/50-joystick.conf solve the joystick problem without having the file in /etc/X11/xorg.conf.d? because the wayland session doesn't crash unless the file is present under /etc... rather than just modifying the basic config under /usr/share/X11
I'll look into this. Thank you.
As for Wayland, could you pre-install it for people who need it for better HiDPI scaling support?
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:46 pm
by dolphin_oracle
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:41 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 10:39 pm
@Joseph DeGarmo does making the joystick.conf modifications in /usr/share/X11/xorg.conf.d/50-joystick.conf solve the joystick problem without having the file in /etc/X11/xorg.conf.d? because the wayland session doesn't crash unless the file is present under /etc... rather than just modifying the basic config under /usr/share/X11
I'll look into this. Thank you.
As for Wayland, could you pre-install it for people who need it for better HiDPI scaling support?
one problem at a time.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 10:57 pm
by Joseph DeGarmo
dolphin_oracle wrote: ↑Tue May 30, 2023 10:46 pm
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:41 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 10:39 pm
@Joseph DeGarmo does making the joystick.conf modifications in /usr/share/X11/xorg.conf.d/50-joystick.conf solve the joystick problem without having the file in /etc/X11/xorg.conf.d? because the wayland session doesn't crash unless the file is present under /etc... rather than just modifying the basic config under /usr/share/X11
I'll look into this. Thank you.
As for Wayland, could you pre-install it for people who need it for better HiDPI scaling support?
one problem at a time.
OK, sorry about that. I'm using Wayland on Plasma on my main Fedora computer and the difference compared to Wayland on Plasma 5.20 is night and day. Wayland is now 95% usable on Plasma 5.27.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 11:09 pm
by siamhie
m_pav wrote: ↑Tue May 30, 2023 11:04 pm
Umm, @dolphin_oracle Had you meant to say anything?
What stands out to me is the mention of Alpha2 when we're now in the Beta testing phase. @siamhie Are you using the Beta1 release for your testing and development now? If not, we might be creating bugs rather than fixing them.
@m_pav I'm using beta1 on bare metal. I also have alpha2 on another thumb drive and booted to it to see the differences. Sorry for any confusion.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 11:14 pm
by dolphin_oracle
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:57 pm
dolphin_oracle wrote: ↑Tue May 30, 2023 10:46 pm
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:41 pm
I'll look into this. Thank you.
As for Wayland, could you pre-install it for people who need it for better HiDPI scaling support?
one problem at a time.
OK, sorry about that. I'm using Wayland on Plasma on my main Fedora computer and the difference compared to Wayland on Plasma 5.20 is night and day. Wayland is now 95% usable on Plasma 5.27.
no worries. I've tried the wayland session a little but not much. my main issue, and it doesn't matter much for a default kde iso, is that it doesn't seem to launch from anything other than sddm.
if the joystick configuration work under /usr/share/X11 that gets a step closer
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 2:03 am
by Duliwi
I do not understand what orgX or Wyland is. But if I understand right, Wyland will give better results for UltraHD monitors, when we have to scale. Right?
So my question is: Would it be possible and meaningful also to implement Wyland into "MX-23 Xfce" by default or as Tweak- Option?
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 2:24 am
by asqwerth
Duliwi wrote: ↑Wed May 31, 2023 2:03 am
I do not understand what orgX or Wyland is. But if I understand right, Wyland will give better results for UltraHD monitors, when we have to scale. Right?
So my question is: Would it be possible and meaningful also to implement Wyland into "MX-23 Xfce" by default or as Tweak- Option?
XFCE is not ready for Wayland yet. It's not just a something you install and turn on. The desktop environment must work with it.
I will note that even on the latest Gnome in Arch, there are irritations still with Wayland. I can't paste any command/text into terminal if I'm logged into Wayland. That is really annoying and I went back to Xorg on my Arch install.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 2:39 am
by Joseph DeGarmo
asqwerth wrote: ↑Wed May 31, 2023 2:24 am
Duliwi wrote: ↑Wed May 31, 2023 2:03 am
I do not understand what orgX or Wyland is. But if I understand right, Wyland will give better results for UltraHD monitors, when we have to scale. Right?
So my question is: Would it be possible and meaningful also to implement Wyland into "MX-23 Xfce" by default or as Tweak- Option?
XFCE is not ready for Wayland yet. It's not just a something you install and turn on. The desktop environment must work with it.
I will note that even on the latest Gnome in Arch, there are irritations still with Wayland. I can't paste any command/text into terminal if I'm logged into Wayland. That is really annoying and I went back to Xorg on my Arch install.
At this time, GNOME and KDE Plasma are the only desktops which support Wayland. And I am able to successfully paste copied text onto the terminal in Plasma Wayland. Other than a few minor bugs, Plasma Wayland works fairly well and is useful on my 4K display with 200% scaling. That's why I use Wayland on Plasma.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:32 am
by i_ri
Hello Melber
MX-Comfort.cfg set to zero slit border worked to unhide. suggest bevel.
in every style add.
dock
slit, hide, show
sample trial using /overlay
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
slit.borderWidth zero
slit.bevelWidth zero works it shows no borders but there is available with right-click on slit border or bevel for Slit Menu so with border at zero the bevel can be one or two gives a place for right-click get Slit Menu if you like that. The slit bevel inherits color from toolbar. In MX-Comfort the slit border color is specified, but we just set it to zero wide. (my borders get wider when running a dockapp, but it unhides. how about You? )
slit when not specified, "the slit’s appearance is controlled by the toolbar directives instead."
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:33 am
by Duliwi
asqwerth wrote: ↑Wed May 31, 2023 2:24 am
XFCE is not ready for Wayland yet.
I see. thank you.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:49 am
by OlafD
Report KDE Plasma:
First of all, great job, you guys are great!
- 1. Installation:
After installation with btrfs the system did not start. It stopped in the console and asked me to boot into maintenancemode or boot normally. I am not familiar with maintenance. Normal boot did not work either. Unfortunately, I no longer have the message that was displayed to me. Is also not quite so tragic, have then installed on ext4. It took longer than usual with MX21 (subjective impression).
- 2. user-installed packages:
I had previously installed MX23 alpha 2 and made myself the list "User Installed Packages" there. I then played this back in beta1 and got the following message:
libdvdcss2 Simple foundation for reading DVDs - runtime libraries
libtxc-dxtn0 S3 Texture Compression (S3TC) library
libtxc-dxtn0:i386 S3 Texture Compression (S3TC) library
w64codecs win64 binary codecs
- 3. root password:
I did the installation WITHOUT root user. At some point, and I can't trace what happened before, my sudo password was no longer accepted (when I tried to open a directory as root in Dolphin). I was able to generate a password for root with "passwd root". But this suggests that the root was already created, which I did not do. Very strange. For now, I'm fine with it.
- 4. sd-card, usb-stick only readable
If I insert a SD card or a USB stick, I can work with it normally. However, after a few minutes, these directories are read-only and I can no longer save or copy anything to them. I had to eject and remount it again and again.
Also changing in MX-Tweaks (Enable mount...by user without root privileges) did not help.
- 5. no sound anymore
The sound was working. At some point, however, it stopped and I can't say exactly when. The taskbar icon shows a crossed out speaker icon and clicking on it shows me no devices.
The MX sound card selection only offers me HDMI and PCH, no internal sound card.
- 5a.
My Apple Airpods do not connect via Bluetooth, which works in MX21 and other distros.
- 6 WLAN
Connecting to my cell phone via hotspot works (password was saved).
Connecting to my FritzBox and entering the router password in the known place (by clicking on the WLAN icon of the taskbar) another window (polkit) popped up and I had to enter the router password again). After a reboot, I had to enter it again (in the popup window). So it did not save it.
- 7. slow boot logo
The new MX boot logo looks very nice! With a "normal PC" it also builds up quickly. On the Mac here, however, it takes a very long time and "stutters". I've already posted this in the KDE alpha2 feedback thread and it was mentioned there that it could be due to the high resolution of the Macbook. I would like to mention this again here. There may be other high resolution laptop screens that could have this problem. Not all users know how to change the boot logo in MX-Boot options or dare to change something there.
- 8. plasma integration firefox
In the Taskleiszt comes the hint to install/activate the Plasma Integration for the browser. However, this addon is no longer maintained/maintained. This can be disabled after all.
FYI: This issues i've never had with MX21.
I hope i can help you with this report. In summary: You're all fantastic and i'm greatfull to have MX!
Kind regards
Olaf
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
resume=UUID=<filter> resume_offset=6334464
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 29.4 Wh (50.6%) condition: 58.1/71.5 Wh (81.2%) volts: 12.1 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: charging cycles: 994
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2400 min/max: 800/3100 scaling: driver: intel_cpufreq governor: ondemand
cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 20799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1,
HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 507x317mm (19.96x12.48") s-diag: 598mm (23.54")
Monitor-1: eDP-1 model: Apple Color LCD built: 2013 res: 1920x1200 hz: 60 dpi: 171 gamma: 1.2
size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10 modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:6
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: object transfer
Drives:
Local Storage: total: 232.08 GiB used: 126.22 GiB (54.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Apple model: SD Card Reader size: 119.08 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 3.00 scheme: MBR
Partition:
ID-1: / raw-size: 112.74 GiB size: 110.41 GiB (97.94%) used: 29.31 GiB (26.5%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 10.67 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 73.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2526 libs: 1386 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
Info:
Processes: 229 Uptime: 57m wakeups: 2 Memory: 7.67 GiB used: 4.06 GiB (53.0%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:56 am
by lordmmx
asqwerth wrote: ↑Tue May 30, 2023 12:01 pm
lordmmx wrote: ↑Tue May 30, 2023 11:56 am
I tried posting my own thread but was told to use this thread so I installed mx Linux beta 1 on Mt dual pentium 3 box and everything went well until I tried to update it I get an error that I need sse2 is this a upstream error or is there a way around it?
Please post your Quick System Info, and the error message.
Pentium 3 1ghz
4gb of sdram pc133 ecc
64gb cf card to ide adapter
Ati Radeon HD 3650 silent by asus
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 5:08 am
by asqwerth
lordmmx wrote: ↑Wed May 31, 2023 3:56 am
asqwerth wrote: ↑Tue May 30, 2023 12:01 pm
Please post your Quick System Info, and the error message.
Pentium 3 1ghz
4gb of sdram pc133 ecc
64gb cf card to ide adapter
Ati Radeon HD 3650 silent by asus
The Quick System Info can be found in the application menu, please run it and paste the WHOLE text here. This thread is meant to help the developers so your bug report must be helpful and detailed, with full details of your hardware.
Also, you did not post the whole text of the error message you got. Without the error message, the devs will be guessing as to what the problem actually was.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 6:15 am
by dolphin_oracle
lordmmx wrote: ↑Wed May 31, 2023 3:56 am
asqwerth wrote: ↑Tue May 30, 2023 12:01 pm
lordmmx wrote: ↑Tue May 30, 2023 11:56 am
I tried posting my own thread but was told to use this thread so I installed mx Linux beta 1 on Mt dual pentium 3 box and everything went well until I tried to update it I get an error that I need sse2 is this a upstream error or is there a way around it?
Please post your Quick System Info, and the error message.
Pentium 3 1ghz
4gb of sdram pc133 ecc
64gb cf card to ide adapter
Ati Radeon HD 3650 silent by asus
What requires sse2? You were doing what when you received the message?
I know web browsers all require sse2.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 6:31 am
by Jerry3904
i_ri wrote: ↑Wed May 31, 2023 3:32 am
Hello Melber
MX-Comfort.cfg set to zero slit border worked to unhide. suggest bevel.
in every style add.
dock
slit, hide, show
sample trial using /overlay
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
slit.borderWidth zero
slit.bevelWidth zero works it shows no borders but there is available with right-click on slit border or bevel for Slit Menu so with border at zero the bevel can be one or two gives a place for right-click get Slit Menu if you like that. The slit bevel inherits color from toolbar. In MX-Comfort the slit border color is specified, but we just set it to zero wide. (my borders get wider when running a dockapp, but it unhides. how about You? )
slit when not specified, "the slit’s appearance is controlled by the toolbar directives instead."
Hey, that works--
great problem solving!
I didn't follow everything you wrote, sorry to say. I just added those two lines to the overlay file, refreshed and now the dock on left center works on autohide. As you mentioned, there is no visible bar.
We will want to investigate slight modifications that might improve it as we go along.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 7:33 am
by Gerson
I like the new MX 23 Plymouth.
My suggestion is to change that black background for a more colourful one, for example a gradient one.
See these examples:
https://store.kde.org/p/1530989
https://store.kde.org/p/2030351
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 7:49 am
by Jerry3904
Jerry3904 wrote: ↑Wed May 31, 2023 6:31 am
<snip>
Hey, that works--
great problem solving!
I didn't follow everything you wrote, sorry to say. I just added those two lines to the overlay file, refreshed and now the dock on left center works on autohide. As you mentioned, there is no visible bar.
We will want to investigate slight modifications that might improve it as we go along.
@ceeslans Since your system never had this problem, I would be interested in whether adding those two line to the overlay file affected it in any way.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 9:12 am
by ceeslans
Jerry3904 wrote: ↑Wed May 31, 2023 7:49 am
Jerry3904 wrote: ↑Wed May 31, 2023 6:31 am
<snip>
Hey, that works--
great problem solving!
I didn't follow everything you wrote, sorry to say. I just added those two lines to the overlay file, refreshed and now the dock on left center works on autohide. As you mentioned, there is no visible bar.
We will want to investigate slight modifications that might improve it as we go along.
@ceeslans Since your system never had this problem, I would be interested in whether adding those two line to the overlay file affected it in any way.
@Jerry3904: No, the dock will continue to autohide and unhide when the mouse touches the screen edge.
But when running a lightcolored fb-style, I do get a fugly white bevel border with
'slit.bevelWidth' value set at 1 or 2.
No problem though, should you set those slit.borderWidth and slit.bevelWidth values in the overlay. Will simply change back 'bevelWidth' to '0' , since that works fine for me.
quickshot_230531_144955.png
quickshot_230531_145141.png
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 9:21 am
by Melber
Jerry3904 wrote: ↑Wed May 31, 2023 6:31 am
i_ri wrote: ↑Wed May 31, 2023 3:32 am
Hello Melber
MX-Comfort.cfg set to zero slit border worked to unhide. suggest bevel.
in every style add.
dock
slit, hide, show
sample trial using /overlay
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
slit.borderWidth zero
slit.bevelWidth zero works it shows no borders but there is available with right-click on slit border or bevel for Slit Menu so with border at zero the bevel can be one or two gives a place for right-click get Slit Menu if you like that. The slit bevel inherits color from toolbar. In MX-Comfort the slit border color is specified, but we just set it to zero wide. (my borders get wider when running a dockapp, but it unhides. how about You? )
slit when not specified, "the slit’s appearance is controlled by the toolbar directives instead."
Hey, that works--
great problem solving!
I didn't follow everything you wrote, sorry to say. I just added those two lines to the overlay file, refreshed and now the dock on left center works on autohide. As you mentioned, there is no visible bar.
We will want to investigate slight modifications that might improve it as we go along.
Nice find
@i_ri
Looks like the bug does have something to do with the setting
slit.borderWidth after all.
I quickly compared some of the working and non-working styles, and the working styles all have t
oolbar.borderWidth &
toolbar.bevelWidth settings whilst the non-working ones do not.
@Jerry3904 if you have time, can you try replacing
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
with
Code: Select all
toolbar.bevelWidth: 0
toolbar.borderWidth: 2
in the overlay file and see if that fixes the dock autohide for MX-comfort or other non-working styles?
(list of working styles here
viewtopic.php?p=726873#p726873)
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 10:01 am
by Jerry3904
What you posted, changing slit to toolbar and reversing the numbers, does not work on an installed b1.
[Gotta go back to work...]
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 10:51 am
by siamhie
Jerry3904 wrote: ↑Wed May 31, 2023 10:01 am
What you posted, changing slit to toolbar and reversing the numbers, does not work on an installed b1.
[Gotta go back to work...]
All the styles that won't reappear when hidden (All MX-comfort styles, Flux, Nyz, etc) display after I played around with these values in overlay.
works
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
doesn't work
Code: Select all
slit.borderWidth: 2
slit.bevelWidth: 0
With the bevelwidth set you can now you can access slits right-click menu when at it's edge.
If you don't want to see the border edge either right-click to access the menu or edit the init file and change the slits alpha value to 0.
You will still have access to the menu via right-click and it will still autohide and reappear when moused over.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 11:21 am
by siamhie
@Jerry3904 @Melber You can also set a default color in the overlay file. (bevelWidth is set to 10 just so you can see the color better)
default-color.jpg
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 11:40 am
by Melber
siamhie wrote: ↑Wed May 31, 2023 10:51 am
Jerry3904 wrote: ↑Wed May 31, 2023 10:01 am
What you posted, changing slit to toolbar and reversing the numbers, does not work on an installed b1.
[Gotta go back to work...]
All the styles that won't reappear when hidden (All MX-comfort styles, Flux, Nyz, etc) display after I played around with these values in overlay.
works
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 2
doesn't work
Code: Select all
slit.borderWidth: 2
slit.bevelWidth: 0
With the bevelwidth set you can now you can access slits right-click menu when at it's edge.
If you don't want to see the border edge either right-click to access the menu or edit the init file and change the slits alpha value to 0.
You will still have access to the menu via right-click and it will still autohide and reappear when moused over.
Reversing the numbers wasn't deliberate, were just the values I copied from a working style.
Thanks both for checking it out. I'll have a closer look tonight when I have time.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 12:32 pm
by monsieurzik
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 12:55 pm
by siamhie
monsieurzik wrote: ↑Wed May 31, 2023 12:32 pm
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
@monsieurzik Ventoy flash drives won't work with any current MX-23 test ISO's. Use either Rufus or MX Live USB Maker instead.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 1:06 pm
by Joseph DeGarmo
monsieurzik wrote: ↑Wed May 31, 2023 12:32 pm
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
If you are using Windows, try Rufus. If MX Linux is your host system, then use MX USB Maker. If using a different Linux distro, then try mintstick (found in Linux Mint and available as a .deb package for Ubuntu, AUR for Arch Linux, or in the Debian bookworm repos) or Fedora Media Writer (if you are using Fedora). I created an MX-23 beta live USB using Fedora Media Writer and it works just fine from my end.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 1:09 pm
by asqwerth
Ventoy: This has been addressed before in this or the alpha thread. Ventoy isn't recognising some file in MX23 due to some changes made in MX. A push request has been made to Ventoy devs but until they accept the changes, Ventoy won't work with MX23.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 1:51 pm
by Joseph DeGarmo
dolphin_oracle wrote: ↑Tue May 30, 2023 11:14 pm
Joseph DeGarmo wrote: ↑Tue May 30, 2023 10:57 pm
OK, sorry about that. I'm using Wayland on Plasma on my main Fedora computer and the difference compared to Wayland on Plasma 5.20 is night and day. Wayland is now 95% usable on Plasma 5.27.
no worries. I've tried the wayland session a little but not much. my main issue, and it doesn't matter much for a default kde iso, is that it doesn't seem to launch from anything other than sddm.
if the joystick configuration work under /usr/share/X11 that gets a step closer
The joystick conf in usr/share works just fine with no breakage of wayland. Tested this on a live USB.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 2:56 pm
by FullScale4Me
monsieurzik wrote: ↑Wed May 31, 2023 12:32 pm
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
This is a Ventoy bug. The MX developers have notified Ventoy.
Workaround is to create a conventional bootable USB with the MX Linux Beta 1 ISO.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:23 pm
by monsieurzik
Joseph DeGarmo wrote: ↑Wed May 31, 2023 1:06 pm
monsieurzik wrote: ↑Wed May 31, 2023 12:32 pm
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
If you are using Windows, try Rufus. If MX Linux is your host system, then use MX USB Maker. If using a different Linux distro, then try mintstick (found in Linux Mint and available as a .deb package for Ubuntu, AUR for Arch Linux, or in the Debian bookworm repos) or Fedora Media Writer (if you are using Fedora). I created an MX-23 beta live USB using Fedora Media Writer and it works just fine from my end.
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:51 pm
by entropyfoe
I see that swapiness is now handled a bit differently.
It is still defaulted to 15.
But in /etc/sysctl.d/ there is now a 99-swapiness_mx.conf with the value.
Not a problem, but if someone is looking for it.
I set mine to 1.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 3:56 pm
by dolphin_oracle
entropyfoe wrote: ↑Wed May 31, 2023 3:51 pm
I see that swapiness is now handled a bit differently.
It is still defaulted to 15.
But in /etc/sysctl.d/ there is now a 99-swapiness_mx.conf with the value.
Not a problem, but if someone is looking for it.
I set mine to 1.
we've done that for a while. debian defaults to 60 I think.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 4:12 pm
by entropyfoe
d_o,
Thanks, yea most people have loats of RAM these days.
The beta is looking very good , a worthy beta in the Warren tradition, more stable than a lot of released distributions.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 4:13 pm
by Jerry3904
monsieurzik wrote: ↑Wed May 31, 2023 3:23 pm
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
When this happens to me, it can almost always be corrected if I use MX Format USB to reformat the device first.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 7:35 pm
by Joseph DeGarmo
monsieurzik wrote: ↑Wed May 31, 2023 3:23 pm
Joseph DeGarmo wrote: ↑Wed May 31, 2023 1:06 pm
monsieurzik wrote: ↑Wed May 31, 2023 12:32 pm
Unable to boot on usb, it's written that antix is not able to find the bootloader. On single usb booting key and with Ventoy.
If you are using Windows, try Rufus. If MX Linux is your host system, then use MX USB Maker. If using a different Linux distro, then try mintstick (found in Linux Mint and available as a .deb package for Ubuntu, AUR for Arch Linux, or in the Debian bookworm repos) or Fedora Media Writer (if you are using Fedora). I created an MX-23 beta live USB using Fedora Media Writer and it works just fine from my end.
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
That's weird. Fedora Media Writer worked for me. And it requires Fedora. I'll boot up Linux Mint tomorrow and try it for myself. I'll also try it out on my MX-21 laptop. Have you tried Balena Etcher? I heard it's quite good.
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 8:02 pm
by FullScale4Me
live-usb-maker tool now available as an AppImage
"For those non-MX or non-antiX linux users who might need to write iso images to USB sticks, we now have the joint antiX/MX live-usb-maker tool available as an AppImage. The tool has been tested on Manjaro, Debian buster and stretch, arch, Porteus, gentoo, xubuntu and ubuntu. You can use it to make a “disc-on-a-stick” similar to etcher, and if you happen to be making a antiX/MX family live-usb, you can use the “full-featured” mode as well to be able to access our persistence features right on the first boot of your live-usb! "
The 64bit-only AppImage (sorry , no 32 bit) is available here:
https://github.com/MX-Linux/lum-qt-appimage/releases/tag/19.11.02
Re: MX-23 beta 1 feedback thread
Posted: Wed May 31, 2023 8:27 pm
by lordmmx
asqwerth wrote: ↑Wed May 31, 2023 5:08 am
lordmmx wrote: ↑Wed May 31, 2023 3:56 am
asqwerth wrote: ↑Tue May 30, 2023 12:01 pm
Please post your Quick System Info, and the error message.
Pentium 3 1ghz
4gb of sdram pc133 ecc
64gb cf card to ide adapter
Ati Radeon HD 3650 silent by asus
The Quick System Info can be found in the application menu, please run it and paste the WHOLE text here. This thread is meant to help the developers so your bug report must be helpful and detailed, with full details of your hardware.
Also, you did not post the whole text of the error message you got. Without the error message, the devs will be guessing as to what the problem actually was.
sorry about that.[
https://sta.sh/0ziw75bdbg7 don't know how to upload an image but hope this helps.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 12:33 am
by i_ri
MX magic.
mx-dockmaker
The command becoming icon is repaired.
Now properly icon showing on a command button.
Is really great. Thanks.
and the
mxfluxbox Tweak Theme Marvel. Thanks. Wow.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 12:39 am
by monsieurzik
Joseph DeGarmo wrote: ↑Wed May 31, 2023 7:35 pm
monsieurzik wrote: ↑Wed May 31, 2023 3:23 pm
Joseph DeGarmo wrote: ↑Wed May 31, 2023 1:06 pm
If you are using Windows, try Rufus. If MX Linux is your host system, then use MX USB Maker. If using a different Linux distro, then try mintstick (found in Linux Mint and available as a .deb package for Ubuntu, AUR for Arch Linux, or in the Debian bookworm repos) or Fedora Media Writer (if you are using Fedora). I created an MX-23 beta live USB using Fedora Media Writer and it works just fine from my end.
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
That's weird. Fedora Media Writer worked for me. And it requires Fedora. I'll boot up Linux Mint tomorrow and try it for myself. I'll also try it out on my MX-21 laptop. Have you tried Balena Etcher? I heard it's quite good.
Already tried. In vain.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 12:53 am
by i_ri
submenus/appearance Menu
loose ends
When a dockmaker.mxdk is deleted, it still shows on the Appearance Menu >Docks >Docks
edit: oh. i see. delete using mx-dockmaker does remove it from menu. Use the tool. Thanks.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 1:36 am
by OlafD
OlafD wrote: ↑Wed May 31, 2023 3:49 am
- 5. no sound anymore
The sound was working. At some point, however, it stopped and I can't say exactly when. The taskbar icon shows a crossed out speaker icon and clicking on it shows me no devices.
The MX sound card selection only offers me HDMI and PCH, no internal sound card.
- 5a.
My Apple Airpods do not connect via Bluetooth, which works in MX21 and other distros.
Postscript:
During a regular system update Pipewire was updated and the sound works again.
Thanks a lot.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 4:36 am
by monsieurzik
Joseph DeGarmo wrote: ↑Wed May 31, 2023 7:35 pm
monsieurzik wrote: ↑Wed May 31, 2023 3:23 pm
Joseph DeGarmo wrote: ↑Wed May 31, 2023 1:06 pm
If you are using Windows, try Rufus. If MX Linux is your host system, then use MX USB Maker. If using a different Linux distro, then try mintstick (found in Linux Mint and available as a .deb package for Ubuntu, AUR for Arch Linux, or in the Debian bookworm repos) or Fedora Media Writer (if you are using Fedora). I created an MX-23 beta live USB using Fedora Media Writer and it works just fine from my end.
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
That's weird. Fedora Media Writer worked for me. And it requires Fedora. I'll boot up Linux Mint tomorrow and try it for myself. I'll also try it out on my MX-21 laptop. Have you tried Balena Etcher? I heard it's quite good.
Already tried with Etcher, in vain. Weird.
Will try with usb mx format tool
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 4:40 am
by i_ri
mx-dockmaker refresh is leaving conky not healthy.
toggle conky in the menu with the change dock choice
it quiets conky.
[exec] (afterup) {/home/demo/.fluxbox/scripts/aftercommand.mxdk ;conkytoggle.sh ;conkytoggle.sh}
mx-dockmaker needs something about refresh conky? @Adrian
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:08 am
by Jerry3904
I've seen that too--there's now improved (and long!) refresh code in the rootMenu
Code: Select all
fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh
EDIT: code corrected.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:29 am
by ceeslans
Jerry3904 wrote: ↑Thu Jun 01, 2023 6:08 am
I've seen that too--there's now improved (and long!) refresh code in the rootMenu
{code]fluxbox-remote restart reloadstyle; idesktoggle idesk refresh[/code]
huhhh ??? are we back again to the 'old' restart command:
fluxbox-remote restart - instead of the much smoother refresh command:
Code: Select all
fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh
that works just fine, or?
fwiw: I still have the old restart entry in rootmenu; just in case, when fluxbox is acting weird...
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:35 am
by Jerry3904
Oops: I was posting that on my MX-21.3, will correct.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:56 am
by Melber
Melber wrote: ↑Mon May 29, 2023 10:59 am
On the subject of the fluxbox init file, is anybody else seeing this behavior?
- manually edit init file and save (eg. change session.screen0.slit.autoHide: false to true)
- fluxbox menu > leave > refresh
- edit to init file gets overwritten/reverted
Changing the fluxbox-remote commands in the menu-mx file from
fluxbox-remote reloadstyle; fluxbox-remote reconfigure
to the old command
fluxbox-remote restart
leaves the edited init file as is.
Re: fluxbox-remote
Does nobody else have this issue?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 7:04 am
by Jerry3904
Good to refresh our collective memory--will test now.
If I follow your steps using a different command (session.screen0.slit.maxOver: false) then I do not see that problem.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 7:14 am
by Melber
siamhie wrote: ↑Mon May 29, 2023 11:22 am
Melber wrote: ↑Mon May 29, 2023 10:59 am
On the subject of the fluxbox init file, is anybody else seeing this behavior?
- manually edit init file and save (eg. change session.screen0.slit.autoHide: false to true)
- fluxbox menu > leave > refresh
- edit to init file gets overwritten/reverted
Changing the fluxbox-remote commands in the menu-mx file from
fluxbox-remote reloadstyle; fluxbox-remote reconfigure
to the old command
fluxbox-remote restart
leaves the edited init file as is.
Yes. I can duplicate it. Reverting back to fluxbox-remote restart fixes it.
Hmmn, presume siamhie tried
session.screen0.slit.autoHide: too.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 7:15 am
by Melber
Re: Fluxbox Dock unhide not working
Adding this to the overlay file seems to have fixed the issue for me without the need for bevel color/transparency adjustment
Code: Select all
Slit.borderWidth: 0
Slit.bevelWidth: 0
Very strange that this bug only seems to affect 1366x768 screens.
Unhiding works fine for docks with borders in mxfb21.3 on the same machine.
Oh well, looks like it's auf Wiedersehen dock border...
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 7:28 am
by Jerry3904
I guess that's right; I'll wait for a PR from you.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 7:39 am
by dolphin_oracle
Melber wrote: ↑Thu Jun 01, 2023 7:15 am
Re: Fluxbox Dock unhide not working
Adding this to the overlay file seems to fixed the issue for me without the need for bevel color/transparency adjustment
Code: Select all
Slit.borderWidth: 0
Slit.bevelWidth: 0
Very strange that this bug only seems to affect 1366x768 screens.
Unhiding works fine for docks with borders in mxfb21.3 on the same machine.
Oh well, looks like it's auf Wiedersehen dock border...
I can say it is not just 1366x768 screens.
Re: No option to select desktop-session in Sddm MX-23 beta 1 KDE Plasma
Posted: Thu Jun 01, 2023 8:22 am
by gurpreetkapoor
I have installed kwin-wayland package and all its dependencies to login into wayland session. But there is no entry for selecting desktop session in Sddm.
I tried this even booting through systemd, but still there is no entry in sddm for selecting desktop session.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash init=/lib/systemd/systemd
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-5.0
serial: <superuser required> Chassis: type: 1 v: pc-q35-5.0 serial: <superuser required>
Mobo: N/A model: N/A serial: N/A UEFI: EFI Development Kit II / OVMF v: 0.0.0 date: 02/06/2015
CPU:
Info: model: AMD EPYC (with IBPB) bits: 64 type: SMP arch: Zen level: v3 note: check
built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 1 stepping: 2 microcode: 0x1000065
Topology: cpus: 4x cores: 1 smt: <unsupported> cache: L1: 4x 96 KiB (384 KiB)
desc: d-1x32 KiB; i-1x64 KiB L2: 4x 512 KiB (2 MiB) desc: 1x512 KiB L3: 4x 8 MiB (32 MiB)
desc: 1x8 MiB
Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 3: 3600 4: 3600 bogomips: 28799
Flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Red Hat Virtio 1.0 GPU driver: virtio-pci v: 1 alternate: virtio_pci ports:
active: Virtual-1 empty: none bus-ID: 00:01.0 chip-ID: 1af4:1050 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: swrast gpu: virtio-pci display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x927 s-dpi: 96 s-size: 507x245mm (19.96x9.65") s-diag: 563mm (22.17")
Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1920x927 hz: 75 dpi: 65 gamma: 1.2
size: 755x364mm (29.72x14.33") diag: 532mm (21") modes: max: 1920x927 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Red Hat QEMU Virtual Machine
driver: snd_hda_intel v: kernel bus-ID: 02:02.0 chip-ID: 8086:2668 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet vendor: Red Hat QEMU Virtual Machine driver: e1000
v: kernel port: 9000 bus-ID: 02:01.0 chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 100 GiB used: 8.98 GiB (9.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 60 GiB block-size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter> rev: 2.5+ scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: QEMU model: HARDDISK size: 40 GiB block-size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter> rev: 2.5+ scheme: GPT
Partition:
ID-1: / raw-size: 59.74 GiB size: 58.5 GiB (97.93%) used: 8.98 GiB (15.3%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2404 libs: 1319 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mx-pkg.mirror.net.in/MX-Linux/mx/repo/ bookworm main non-free
2: deb http://mx-pkg.mirror.net.in/MX-Linux/mx/repo/ bookworm ahs
Info:
Processes: 195 Uptime: 8m wakeups: 37 Memory: 1.92 GiB used: 1.11 GiB (58.1%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: No option to select desktop-session in Sddm MX-23 beta 1 KDE Plasma
Posted: Thu Jun 01, 2023 8:27 am
by dolphin_oracle
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 8:22 am
I have installed kwin-wayland package and all its dependencies to login into wayland session. But there is no entry for selecting desktop session in Sddm.
I tried this even booting through systemd, but still there is no entry in sddm for selecting desktop session.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash init=/lib/systemd/systemd
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-5.0
serial: <superuser required> Chassis: type: 1 v: pc-q35-5.0 serial: <superuser required>
Mobo: N/A model: N/A serial: N/A UEFI: EFI Development Kit II / OVMF v: 0.0.0 date: 02/06/2015
CPU:
Info: model: AMD EPYC (with IBPB) bits: 64 type: SMP arch: Zen level: v3 note: check
built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 1 stepping: 2 microcode: 0x1000065
Topology: cpus: 4x cores: 1 smt: <unsupported> cache: L1: 4x 96 KiB (384 KiB)
desc: d-1x32 KiB; i-1x64 KiB L2: 4x 512 KiB (2 MiB) desc: 1x512 KiB L3: 4x 8 MiB (32 MiB)
desc: 1x8 MiB
Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 3: 3600 4: 3600 bogomips: 28799
Flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Red Hat Virtio 1.0 GPU driver: virtio-pci v: 1 alternate: virtio_pci ports:
active: Virtual-1 empty: none bus-ID: 00:01.0 chip-ID: 1af4:1050 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: swrast gpu: virtio-pci display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x927 s-dpi: 96 s-size: 507x245mm (19.96x9.65") s-diag: 563mm (22.17")
Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1920x927 hz: 75 dpi: 65 gamma: 1.2
size: 755x364mm (29.72x14.33") diag: 532mm (21") modes: max: 1920x927 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
Device-1: Intel 82801FB/FBM/FR/FW/FRW High Definition Audio vendor: Red Hat QEMU Virtual Machine
driver: snd_hda_intel v: kernel bus-ID: 02:02.0 chip-ID: 8086:2668 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82540EM Gigabit Ethernet vendor: Red Hat QEMU Virtual Machine driver: e1000
v: kernel port: 9000 bus-ID: 02:01.0 chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 100 GiB used: 8.98 GiB (9.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 60 GiB block-size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter> rev: 2.5+ scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: QEMU model: HARDDISK size: 40 GiB block-size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter> rev: 2.5+ scheme: GPT
Partition:
ID-1: / raw-size: 59.74 GiB size: 58.5 GiB (97.93%) used: 8.98 GiB (15.3%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2404 libs: 1319 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mx-pkg.mirror.net.in/MX-Linux/mx/repo/ bookworm main non-free
2: deb http://mx-pkg.mirror.net.in/MX-Linux/mx/repo/ bookworm ahs
Info:
Processes: 195 Uptime: 8m wakeups: 37 Memory: 1.92 GiB used: 1.11 GiB (58.1%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
should be lower left hand corner.
make sure plasmsa-workspace-wayland is installed.
Re: No option to select desktop-session in Sddm MX-23 beta 1 KDE Plasma
Posted: Thu Jun 01, 2023 9:30 am
by gurpreetkapoor
Thanks @dolphin_oracle, installing plasmsa-workspace-wayland solved the issue.
Re: Removing extra firmware packages installed through ahs repo by default in Kde Plasma edition
Posted: Thu Jun 01, 2023 9:43 am
by gurpreetkapoor
On newly installed MX KDE Plasma, it includes packages installed from ahs repo, every time running update, if there are any updates in ahs repo, its too slow to perform update as i believe it compiles drivers for particular kernel version through dkms, even though i dont need most of those ahs drivers except for few, would anyone please guide me to filter out those drivers, so that i keep only those drivers which are actually needed from ahs repo??
Re: Removing extra firmware packages installed through ahs repo by default in Kde Plasma edition
Posted: Thu Jun 01, 2023 9:59 am
by dolphin_oracle
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 9:43 am
On newly installed MX KDE Plasma, it includes packages installed from ahs repo, every time running update, if there are any updates in ahs repo, its too slow to perform update as i believe it compiles drivers for particular kernel version through dkms, even though i dont need most of those ahs drivers except for few, would anyone please guide me to filter out those drivers, so that i keep only those drivers which are actually needed from ahs repo??
just remove the drivers packages you don't need. all the packages end with -dkms.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 10:12 am
by gurpreetkapoor
dolphin_oracle wrote: ↑Thu Jun 01, 2023 9:59 am
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 9:43 am
On newly installed MX KDE Plasma, it includes packages installed from ahs repo, every time running update, if there are any updates in ahs repo, its too slow to perform update as i believe it compiles drivers for particular kernel version through dkms, even though i dont need most of those ahs drivers except for few, would anyone please guide me to filter out those drivers, so that i keep only those drivers which are actually needed from ahs repo??
just remove the drivers packages you don't need. all the packages end with -dkms.
Thanks
@dolphin_oracle for reply, I did not notice that. sorry for that.
Re: Using kio-admin instead of kde-servicemenu-rootactions
Posted: Thu Jun 01, 2023 10:16 am
by gurpreetkapoor
just a suggestion. Why not mx 23 Kde Plasma move to kio-admin instead of kde-servicemenu-rootactions by default???
Re: Using kio-admin instead of kde-servicemenu-rootactions
Posted: Thu Jun 01, 2023 10:22 am
by dolphin_oracle
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 10:16 am
just a suggestion. Why not mx 23 Kde Plasma move to kio-admin instead of kde-servicemenu-rootactions by default???
what is the reason to do that?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 10:26 am
by gurpreetkapoor
dolphin_oracle wrote: ↑Thu Jun 01, 2023 10:22 am
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 10:16 am
just a suggestion. Why not mx 23 Kde Plasma move to kio-admin instead of kde-servicemenu-rootactions by default???
what is the reason to do that?
kde plasma 5.27.5 has all the functionality by default, which is provided by kde-servicemenu-rootactions, I am not sure whether kde-servicemenu-rootactions package is maintained upstream or not. kio-admin package is available in debian 12, it also enables root menu action in dolphin and other graphical applications on right click.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 11:46 am
by siamhie
@Jerry3904 @Melber @ceeslans
From what I can tell the {fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh} command will overwrite ANY manual edits made to the init file.
Case in point. I've moved some entries around so that (to me) they are in some sort of order.
session.screen0.struts: 0,0,0,0 > line 29
session.screen0.struts.1: 0,0,0,0 > line 30
session.screen0.workspacewarpingvertical: false > line 31
session.screen0.workspacewarpinghorizontal: false > line 32
moved-entry2.jpg
After I run the above command the entries get moved back to (I assume) the original placement.
session.screen0.struts: 0,0,0,0 > moved to line 70
session.screen0.struts.1: 0,0,0,0 > moved to line 34
session.screen0.workspacewarpingvertical: false > moved to line 41
session.screen0.workspacewarpinghorizontal: false > moved to line 44
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 12:42 pm
by Jerry3904
It looks like this bug is actually a feature, judging from this sentence in
the Fluxbox Help doc about slitlist:
Similar to the init file it should not be edited while fluxbox is running. Otherwise changes may get overwritten.
That "may" seems to explain why we have been making changes via scripts all along without problem: it may only refer to
manual edits to keep the system stable--perhaps especially the remote system.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 1:15 pm
by siamhie
Jerry3904 wrote: ↑Thu Jun 01, 2023 12:42 pm
It looks like this bug is actually a feature, judging from this sentence in
the Fluxbox Help doc about slitlist:
Similar to the init file it should not be edited while fluxbox is running. Otherwise changes may get overwritten.
That "may" seems to explain why we have been making changes via scripts all along without problem: it may only refer to
manual edits to keep the system stable--perhaps especially the remote system.
@Jerry3904 @dolphin_oracle @ceeslans I've tracked down which fluxbox-remote command overwrites manual edits of the init file. (fluxbox-remote reloadstyle)
I broke down the command to individual entries and came up with this.
Refresh-orig and Refresh-2 overwrite manual edits of the init file. The other Refresh entries do not.
Code: Select all
[exec] (Refresh) {fluxbox-remote restart; idesktoggle idesk refresh }
[exec] (Refresh-orig) {fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Refresh-2) {fluxbox-remote reloadstyle; idesktoggle idesk refresh}
[exec] (Refresh-3) {fluxbox-remote reconfigure; idesktoggle idesk refresh}
Even the stock fluxbox root menu doesn't have the reloadstyle command. (copied from /etc/X11/fluxbox//fluxbox-menu)
Code: Select all
[workspaces] (Workspaces)
[reconfig] (Reconfigure)
[restart] (Restart)
[exit] (Exit)
Do we need the reloadstyle command?
Code: Select all
Window Manager Commands
These commands affect the Window Manager, or more than one window.
Restart [path]
Restarts fluxbox. This does not close any running applications. If the optional path is a path to an executable window manager, that manager is started in place of fluxbox.
Quit | Exit
Exits fluxbox. This will normally cause X to stop as well and terminate all existing applications, returning you to the login manager or console.
Reconfig | Reconfigure
Reloads all fluxbox configuration files including the keys file, apps file, and init file, if they have changed.
SetStyle path
Sets the current style to that given in path, which must be the full path to a fluxbox style.
ReloadStyle
Reloads only the current style. Useful after editing a style which is currently in use.
ExecCommand args … | Exec args … | Execute args …
Probably the most-used binding of all. Passes all the arguments to your $SHELL (or /bin/sh if $SHELL is not set). You can use this to launch applications, run shell scripts, etc. Since all arguments are passed verbatim to the shell, you can use environment variables, pipes, or anything else the shell can do. Note that processes only see environment variables that were set before fluxbox started (such as in ~/.fluxbox/startup), or any that are set via the Export or SetEnv commands, below. See fluxbox(1) for more details on the ENVIRONMENT and \~/.fluxbox/startup file.
CommandDialog
Pops up a dialog box that lets you type in any of these commands manually.
SetEnv name value | Export name=value
Sets an environment variable in Fluxbox. It will be passed to any applications spawned by any future ExecCommand commands.
SetResourceValue resourcename resourcevalue | SetResourceValueDialog
Sets a fluxbox resource value, which are normally stored in the init file. See fluxbox(1) for more details on available resources and allowed values.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 1:41 pm
by Jerry3904
Thanks for tracking it. Not sure ATM bcuz others worked on it; so we'll flag @ceeslans and@dolphin_oracle and see what they think
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 1:47 pm
by siamhie
Jerry3904 wrote: ↑Thu Jun 01, 2023 1:41 pm
Thanks for tracking it. Not sure ATM bcuz others worked on it; so we'll flag @ceeslans and@dolphin_oracle and see what they think
OK
@Jerry3904 I'll go ahead and mention them also in my post.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 2:18 pm
by dolphin_oracle
they must not overwrite all edits, as reloadstyle reconfigure is how mx-tweak changes the theme. as far as I know, the theme stays changed.
perhaps only some lines are overwritten, which makes necessary using the restart command after any change that effects those lines.
on the original fluxbox menus provided with the package, there is both a restart and a reconfigure menu option, rather than just our one blanket refresh.
our fluxbox menu entry should probably use restart
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 2:41 pm
by ceeslans
siamhie wrote: ↑Thu Jun 01, 2023 1:15 pm
I've tracked down which fluxbox-remote command overwrites manual edits of the init file. (fluxbox-remote reloadstyle)
I broke down the command to individual entries and came up with this.
Refresh-orig and Refresh-2 overwrite manual edits of the init file. The other Refresh entries do not.
Code: Select all
[exec] (Refresh) {fluxbox-remote restart; idesktoggle idesk refresh }
[exec] (Refresh-orig) {fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Refresh-2) {fluxbox-remote reloadstyle; idesktoggle idesk refresh}
[exec] (Refresh-3) {fluxbox-remote reconfigure; idesktoggle idesk refresh}
Even the stock fluxbox root menu doesn't have the reloadstyle command. (copied from /etc/X11/fluxbox//fluxbox-menu)
Code: Select all
[workspaces] (Workspaces)
[reconfig] (Reconfigure)
[restart] (Restart)
[exit] (Exit)
@siamhie : first of all, in the newer fluxbox version (that comes with MX23), commands like reloadstyle actually
do work correctly.
you can see all fluxbox-remote commands, run following in a terminal:
Executing the 'fluxbox-remote restart' makes a rather hefty reloading of the desktop, especially if more applications are open. Fluxbox developers indicated that the [restart] command should be used "when fluxbox is behaving weird".
'mx-tweak' uses the combination "reloadstyle" and "reconfigure" for a very smooth style+theme setting --> I'm sure you have experienced same.
And they work flawlessy for immediate change of settings in the keys, apps and overlay files .
I tested your reload/reconfigure commands on init - where I manually edited "session.screen0.defaultDeco" from NORMAL to BORDER.
I found that only the (Refresh) one worked: the decor changed to borders only --> and vica versa.
the other three (Refresh-orig/Refresh-2/Refresh-3) had no effect.
I must conclude that any manual edit to the init file, must be followed by a 'fluxbox-remote restart' command (with or without the additional idesktoggle).
therefor suggest that we maintain two settings:
Code: Select all
[exec] (Refresh) {fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Restart fluxbox) {fluxbox-remote restart; idesktoggle idesk refresh}
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 3:31 pm
by Jerry3904
If we follow @ceeslans, I'm going to have to make the distinction clear in the menu name. Maybe there's another way to do it with a submenu. I'll work on it.
Thanks to all contributions toward answering this question!
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 3:35 pm
by siamhie
ceeslans wrote: ↑Thu Jun 01, 2023 2:41 pm
I tested your reload/reconfigure commands on init - where I manually edited "session.screen0.defaultDeco" from NORMAL to BORDER.
I found that only the (Refresh) one worked: the decor changed to borders only --> and vica versa.
the other three (Refresh-orig/Refresh-2/Refresh-3) had no effect.
I must conclude that any manual edit to the init file, must be followed by a 'fluxbox-remote restart' command (with or without the additional idesktoggle).
therefor suggest that we maintain two settings:
[exec] (Refresh) {fluxbox-remote reloadstyle; fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Restart fluxbox) {fluxbox-remote restart; idesktoggle idesk refresh}
@ceeslans Reconfigure only works on newly opened windows. Existing opened windows would require the Restart command. ReloadStyle overwrites all manually edited entries in the init file which I don't understand if all you are doing is editing style files.
Code: Select all
Window Manager Commands
Restart [path]
Restarts fluxbox. This does not close any running applications. If the optional path is a path to an executable window manager, that manager is started in place of fluxbox.
Reconfig | Reconfigure
Reloads all fluxbox configuration files including the keys file, apps file, and init file, if they have changed.
ReloadStyle
Reloads only the current style. Useful after editing a style which is currently in use.
I propose to keep the Leave subcategory like we have in MX-21 fluxbox.
Code: Select all
[submenu] (Leave)
[exec] (Refresh) { fluxbox-remote restart; idesktoggle idesk refresh }
[exec] (Suspend) {sudo 'pm-suspend'}
[exit] (Logout)
[exec] (Reboot) {sudo /sbin/reboot}
[exec] (Shutdown) {sudo /sbin/halt}
[end]
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 3:49 pm
by dolphin_oracle
so I presume that the init file is overwritten with whatever the current loaded values are, correct? So after any edit besides a style change a restart should be done, which restarts fluxbox without without syncing up any init values. reloadstyle and reconfigure would be OK for style change if that is true.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 3:56 pm
by Jerry3904
Thanks to both, again. Messy...
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 4:15 pm
by Jerry3904
So here's what I'm thinking ATM:
1) we've had a working refresh command for 3 years without a single complaint from a user.
2) DO already has the style refresh command built into Tweak
Can we 1) continue with the MX-21 restart command that will cover 99.99% of user needs, 2) rely on Tweak to cover most of the remainder, and 3) put a short note in the MXFB Manual?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 4:41 pm
by ceeslans
@siamhie @dolphin_oracle :
All I see is that any manual change of the
apps and/or
keys and/or
overlay files can be executed on-the-fly with the smooth refresh command (combined 'reloadstyle'+'reconfigure'). Same goes for font changes in ~/.gtkrc and ~/.config/gtk-3.0/settings ini.
Only
init seems to accept and execute manual changes if confirmed by the 'restart' command.
Believe I'm not the only one experiencing this; after all, @Melber was the first to notice exactly this behavior...
But I'm okay with whatever is going to be written in 'menu-mx' . That's one file that doesn't need
any reload/restart ...
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 4:51 pm
by siamhie
@Jerry3904 That would work perfectly.
@ceeslans I can always edit out ReloadStyle from my root menu because I edit my init file so that all categories are grouped together (titlebar, iconbar, toolbar, etc). That's just the OCD in me.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:01 pm
by Melber
ceeslans wrote: ↑Thu Jun 01, 2023 4:41 pm
All I see is that any manual change of the
apps and/or
keys and/or
overlay files can be executed on-the-fly with the smooth refresh command (combined 'reloadstyle'+'reconfigure'). Same goes for font changes in ~/.gtkrc and ~/.config/gtk-3.0/settings ini.
Only
init seems to accept and execute manual changes if confirmed by the 'restart' command.
Believe I'm not the only one experiencing this; after all, @Melber was the first to notice exactly this behavior...
Yep, that's what I'm seeing.
Jerry3904 wrote: ↑Thu Jun 01, 2023 4:15 pm
So here's what I'm thinking ATM:
1) we've had a working refresh command for 3 years without a single complaint from a user.
2) DO already has the style refresh command built into Tweak
Can we 1) continue with the MX-21 restart command that will cover 99.99% of user needs, 2) rely on Tweak to cover most of the remainder, and 3) put a short note in the MXFB Manual?
my two cents
1) I'm fine with either sticking with
fluxbox-remote restart or amending menu to something like this
Code: Select all
[submenu] (Leave)
[submenu] (Refresh)
[exec] (Reload configuration) {fluxbox-remote reloadstyle fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Restart fluxbox) {fluxbox-remote restart; idesktoggle idesk refresh}
[end]
[exec] (Suspend) {sudo 'pm-suspend'}
[exit] (Logout)
[exec] (Reboot) {sudo /sbin/reboot}
[exec] (Shutdown) {sudo /sbin/halt}
[end]
If I had to choose i'd go with the later.
2)
fluxbox-remote reloadstyle fluxbox-remote reconfigure works well in tweak - stick with it
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:19 pm
by Jerry3904
I would simplify that if we were going to go with it:
Code: Select all
[submenu] (Leave)
[submenu] (Refresh)
[exec] (Configuration) {fluxbox-remote reloadstyle fluxbox-remote reconfigure; idesktoggle idesk refresh}
[exec] (Fluxbox) {fluxbox-remote restart; idesktoggle idesk refresh}
[end]
[exec] (Suspend) {sudo 'pm-suspend'}
[exit] (Logout)
[exec] (Reboot) {sudo /sbin/reboot}
[exec] (Shutdown) {sudo /sbin/halt}
[end]
But then the ordinary user will immediately want to know what the difference is and which s/he should use. I'm still thinking of keeping it simple--all the more b/c we're in the late moments of beta testing!
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:26 pm
by Melber
Jerry3904 wrote: ↑Thu Jun 01, 2023 6:19 pm
....I'm still thinking of keeping it simple--all the more b/c we're in the late moments of beta testing!
fluxbox-remote restart it is then.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 6:31 pm
by Melber
@Jerry3904 Couple of questions re: fluxbox menu with system language other than English (in my case set to German).
1. New docks created with dockmaker get added to the main appearance submenu as expected.
However, because menu-mx_de reads directly from
/usr/share/mxflux/menu-translations/appearance_de, the new docks aren't shown in the German menu.
2.
/usr/share/mxflux/menu-translations/settings_de submenu "Menüs" has links back to the main submenu configs.
Any changes made to these will have no effect on what is shown by menu-mx_de
Code: Select all
[submenu] (Menüs)
[exec] (Haupt) {exo-open ~/.fluxbox/menu-mx}
[exec] (Erscheinungsbild) {exo-open ~/.fluxbox/submenus/appearance}
[exec] (Einstellungen) {exo-open ~/.fluxbox/submenus/settings}
[exec] (Verstecken) {exo-open ~/.fluxbox/submenus/out-of-sight}
[end]
Am I missing some obvious way to update the _de menus?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 9:16 pm
by Jerry3904
1. See if suggestion below is also relevant here.
2. Seems it might work right if we used an asterisk like this? EN menu still works with that.
Code: Select all
[submenu] (Menüs)
[exec] (Haupt) {exo-open ~/.fluxbox/menu-mx*}
[exec] (Erscheinungsbild) {exo-open ~/.fluxbox/submenus/appearance*}
[exec] (Einstellungen) {exo-open ~/.fluxbox/submenus/settings*}
[exec] (Verstecken) {exo-open ~/.fluxbox/submenus/out-of-sight*}
[end]
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 9:49 pm
by FullScale4Me
Telegram Desktop Client -- (debian backports) aka telegram-desktop_4.6.5+ds-1~bpo11+1_amd64.deg was selected from MXPI.
Code: Select all
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
telegram-desktop : Depends: libabsl20200923 (>= 0~20200923-1) but it is not installable
Depends: libavcodec58 (>= 7:4.2) but it is not installable
Depends: libavformat58 (>= 7:4.2) but it is not installable
Depends: libavutil56 (>= 7:4.0) but it is not installable
Depends: libssl1.1 (>= 1.1.0) but it is not installable
Depends: libswresample3 (>= 7:4.0) but it is not installable
Depends: libswscale5 (>= 7:4.0) but it is not installable
Depends: libvpx6 (>= 1.6.0) but it is not installable
Depends: qtbase-abi-5-15-2 but it is not installable
E: Unable to correct problems, you have held broken packages.
installed and functions normally.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 9:54 pm
by FullScale4Me
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
Code: Select all
Attempt #1
Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
virtualbox-ext-pack
0 upgraded, 1 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.
9 not fully installed or removed.
Need to get 0 B/11.6 kB of archives.
After this operation, 152 kB of additional disk space will be used.
E: Internal Error, No file name for virtualbox-guest-additions-iso:amd64
gpasswd: group 'vboxusers' does not exist in /etc/group
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 10:39 pm
by dolphin_oracle
FullScale4Me wrote: ↑Thu Jun 01, 2023 9:54 pm
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
Code: Select all
Attempt #1
Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
virtualbox-ext-pack
0 upgraded, 1 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.
9 not fully installed or removed.
Need to get 0 B/11.6 kB of archives.
After this operation, 152 kB of additional disk space will be used.
E: Internal Error, No file name for virtualbox-guest-additions-iso:amd64
gpasswd: group 'vboxusers' does not exist in /etc/group
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
was virtualbox installed from Popular Apps?
thanks for the report on telegram-desktop. debian-backports doesn't exist yet for bookworm. will keep an eye on it.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 11:19 pm
by FullScale4Me
dolphin_oracle wrote: ↑Thu Jun 01, 2023 10:39 pm
FullScale4Me wrote: ↑Thu Jun 01, 2023 9:54 pm
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
Code: Select all
Attempt #1
Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
virtualbox-ext-pack
0 upgraded, 1 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.
9 not fully installed or removed.
Need to get 0 B/11.6 kB of archives.
After this operation, 152 kB of additional disk space will be used.
E: Internal Error, No file name for virtualbox-guest-additions-iso:amd64
gpasswd: group 'vboxusers' does not exist in /etc/group
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
was virtualbox installed from Popular Apps?
thanks for the report on telegram-desktop. debian-backports doesn't exist yet for bookworm. will keep an eye on it.
Yes, virtualbox was an attempt to install from Popular Apps.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 01, 2023 11:50 pm
by dolphin_oracle
@FullScale4Me
the output of the virtualbox attempt indicates you have packages not quite installed.
this can cause all sorts of issues.
to clear them up, or at least to get the install going again.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:19 am
by FullScale4Me
dolphin_oracle wrote: ↑Thu Jun 01, 2023 11:50 pm
@FullScale4Me
the output of the virtualbox attempt indicates you have packages not quite installed.
this can cause all sorts of issues.
to clear them up, or at least to get the install going again.
Thanks DO! It seems to have fixed most of it. Running seems to be a normal set of Virtual Box behaviors.
Code: Select all
mike@MX23XFCEB1:~
$ sudo dpkg --configure -a
[sudo] password for mike:
Setting up libgsoap-2.8.124:amd64 (2.8.124-2) ...
Setting up virtualbox-guest-additions-iso (7.0.6-1) ...
Setting up libvncserver1:amd64 (0.9.14+dfsg-1) ...
Setting up liblzf1:amd64 (3.6-3) ...
Setting up libqt5opengl5:amd64 (5.15.8+dfsg-11) ...
Setting up libtpms0:amd64 (0.9.2-3.1) ...
Setting up virtualbox-dkms (7.0.6-dfsg-1~mx23+1) ...
Loading new virtualbox-7.0.6 DKMS files...
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Building for 6.1.0-9-amd64
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Building initial module for 6.1.0-9-amd64
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Done.
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
vboxdrv.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/6.1.0-9-amd64/updates/dkms/
vboxnetadp.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/6.1.0-9-amd64/updates/dkms/
vboxnetflt.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/6.1.0-9-amd64/updates/dkms/
depmod....
Setting up virtualbox-qt (7.0.6-dfsg-1~mx23+1) ...
Setting up virtualbox (7.0.6-dfsg-1~mx23+1) ...
Unloading VirtualBox kernel modules....
Loading VirtualBox kernel modules... vboxdrv vboxnetflt vboxnetadp.
Processing triggers for mailcap (3.70+nmu1) ...
Processing triggers for desktop-file-utils (0.26-1) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for gnome-menus (3.36.0-1.1) ...
Processing triggers for libc-bin (2.36-9) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for shared-mime-info (2.2-1) ...
mike@MX23XFCEB1:~
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:51 am
by Joseph DeGarmo
FullScale4Me wrote: ↑Thu Jun 01, 2023 9:54 pm
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
Code: Select all
Attempt #1
Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
virtualbox-ext-pack
0 upgraded, 1 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.
9 not fully installed or removed.
Need to get 0 B/11.6 kB of archives.
After this operation, 152 kB of additional disk space will be used.
E: Internal Error, No file name for virtualbox-guest-additions-iso:amd64
gpasswd: group 'vboxusers' does not exist in /etc/group
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
VirtualBox 7 is not yet compatible on Debian 12. Oracle will not release it to the Bookworm repositories until after it gets a stable release.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 1:47 am
by i_ri
[exec] (re ) {togglerefresh}
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 2:08 am
by OlafD
OlafD wrote: ↑Wed May 31, 2023 3:49 am
- 3. root password:
I did the installation WITHOUT root user. At some point, and I can't trace what happened before, my sudo password was no longer accepted (when I tried to open a directory as root in Dolphin). I was able to generate a password for root with "passwd root". But this suggests that the root was already created, which I did not do. Very strange. For now, I'm fine with it.
- 4. sd-card, usb-stick only readable
If I insert a SD card or a USB stick, I can work with it normally. However, after a few minutes, these directories are read-only and I can no longer save or copy anything to them. I had to eject and remount it again and again.
Also changing in MX-Tweaks (Enable mount...by user without root privileges) did not help.
- 6 WLAN
Connecting to my cell phone via hotspot works (password was saved).
Connecting to my FritzBox and entering the router password in the known place (by clicking on the WLAN icon of the taskbar) another window (polkit) popped up and I had to enter the router password again). After a reboot, I had to enter it again (in the popup window). So it did not save it.
I found out that I am not in the sudoers file. When I tried to add myself to the wheel group, I got a message that the wheel group does not exist.
I am sure that during the installation I only created me as a user and left the root account disabled.
Apparently something must have happened during testing (package installtion, settings,,...) whatever that may have been.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 5:24 am
by OlafD
xfce with btrfs and subvolumes @root and @home: boot-problmes and unable to login
Macbook 11,1 from 2012/2013 8same as in my last post:
viewtopic.php?p=726957#p726957
I can't make QSI because i'm unable to login.
Installed xfce 64 bit UEFI with standard install specs.
Restart after Installing shows prompt with the choice of "maintenance mode". I cancel it with Ctrl+D. Also you can see the slow Boot-Logo live. And i'm not able to Login. After entering password and hit Enter it switched to the Login-Screen back (same as in KDE in my previous post). Here ist a video:
https://cloud.olafdressler.de/index.php ... 7SaisSWppW
Here i've another video with the boot-process after hitting Ctrl+D:
https://cloud.olafdressler.de/index.php ... EQMJmkod55
Moderator: ridiculous formatting removed, use normal size or just bold. SPARINGLY. Thanks.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 5:46 am
by AlphaElwedritsch
Can you login in cli?
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 6:24 am
by OlafD
yes, but there's a message that folder @home doesn't exist or similar (don't know the words correctly)
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 6:35 am
by dolphin_oracle
Joseph DeGarmo wrote: ↑Fri Jun 02, 2023 12:51 am
FullScale4Me wrote: ↑Thu Jun 01, 2023 9:54 pm
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
Code: Select all
Attempt #1
Hit:1 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
virtualbox-ext-pack
0 upgraded, 1 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.
9 not fully installed or removed.
Need to get 0 B/11.6 kB of archives.
After this operation, 152 kB of additional disk space will be used.
E: Internal Error, No file name for virtualbox-guest-additions-iso:amd64
gpasswd: group 'vboxusers' does not exist in /etc/group
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda6
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: OptiPlex 7050 v: N/A serial: <superuser required> Chassis:
type: 3 serial: <superuser required>
Mobo: Dell model: 0NW6H5 v: A00 serial: <superuser required> UEFI: Dell v: 1.21.0
date: 07/12/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
charge: 5% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-7700 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1578 high: 3600 min/max: 800/4200 scaling: driver: intel_pstate
governor: powersave cores: 1: 3600 2: 1300 3: 1300 4: 1300 5: 1300 6: 1300 7: 1300 8: 1231
bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 630 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: HDMI-A-1 empty: DP-1, DP-2, DP-3, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:5912 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer K242HYL serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 630 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Dell driver: snd_hda_intel v: kernel
bus-ID: 1-3:2 bus-ID: 00:1f.3 chip-ID: 046d:0825 chip-ID: 8086:a2f0 class-ID: 0102
serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15e3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-7:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 953.87 GiB used: 410.24 GiB (43.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingfast model: N/A size: 953.87 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9B0 scheme: GPT
Partition:
ID-1: / raw-size: 89.13 GiB size: 87.18 GiB (97.81%) used: 19.72 GiB (22.6%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.1 MiB (44.9%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 6 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2123 pm: dpkg pkgs: 2115 libs: 1097 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
Processes: 254 Uptime: 19h 55m wakeups: 63 Memory: 31.21 GiB used: 4.53 GiB (14.5%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
VirtualBox 7 is not yet compatible on Debian 12. Oracle will not release it to the Bookworm repositories until after it gets a stable release.
We have our own builds of virtualbox 7 on bookworm.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 6:38 am
by dolphin_oracle
OlafD wrote: ↑Fri Jun 02, 2023 2:08 am
OlafD wrote: ↑Wed May 31, 2023 3:49 am
- 3. root password:
I did the installation WITHOUT root user. At some point, and I can't trace what happened before, my sudo password was no longer accepted (when I tried to open a directory as root in Dolphin). I was able to generate a password for root with "passwd root". But this suggests that the root was already created, which I did not do. Very strange. For now, I'm fine with it.
- 4. sd-card, usb-stick only readable
If I insert a SD card or a USB stick, I can work with it normally. However, after a few minutes, these directories are read-only and I can no longer save or copy anything to them. I had to eject and remount it again and again.
Also changing in MX-Tweaks (Enable mount...by user without root privileges) did not help.
- 6 WLAN
Connecting to my cell phone via hotspot works (password was saved).
Connecting to my FritzBox and entering the router password in the known place (by clicking on the WLAN icon of the taskbar) another window (polkit) popped up and I had to enter the router password again). After a reboot, I had to enter it again (in the popup window). So it did not save it.
I found out that I am not in the sudoers file. When I tried to add myself to the wheel group, I got a message that the wheel group does not exist.
I am sure that during the installation I only created me as a user and left the root account disabled.
Apparently something must have happened during testing (package installtion, settings,,...) whatever that may have been.
All users should be part of the sudo group by default. It’s possible to create an account without the user being in the sudo group via mx user manager but the installer doesn’t do that.
The root account is always present. If you don’t set a password it’s locked but it’s still there.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 7:58 am
by dolphin_oracle
OlafD wrote: ↑Fri Jun 02, 2023 5:24 am
xfce with btrfs and subvolumes @root and @home: boot-problmes and unable to login
Macbook 11,1 from 2012/2013 8same as in my last post:
viewtopic.php?p=726957#p726957
I can't make QSI because i'm unable to login.
Installed xfce 64 bit UEFI with standard install specs.
Restart after Installing shows prompt with the choice of "maintenance mode". I cancel it with Ctrl+D. Also you can see the slow Boot-Logo live. And i'm not able to Login. After entering password and hit Enter it switched to the Login-Screen back (same as in KDE in my previous post). Here ist a video:
https://cloud.olafdressler.de/index.php ... 7SaisSWppW
Here i've another video with the boot-process after hitting Ctrl+D:
https://cloud.olafdressler.de/index.php ... EQMJmkod55
Moderator: ridiculous formatting removed, use normal size or just bold. SPARINGLY. Thanks.
can you get the /etc/fstab file and the /var/log/minstall.log file from the installed system and post them?
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 8:23 am
by OlafD
dolphin_oracle wrote: ↑Fri Jun 02, 2023 7:58 am
OlafD wrote: ↑Fri Jun 02, 2023 5:24 am
xfce with btrfs and subvolumes @root and @home: boot-problmes and unable to login
Macbook 11,1 from 2012/2013 8same as in my last post:
viewtopic.php?p=726957#p726957
I can't make QSI because i'm unable to login.
Installed xfce 64 bit UEFI with standard install specs.
Restart after Installing shows prompt with the choice of "maintenance mode". I cancel it with Ctrl+D. Also you can see the slow Boot-Logo live. And i'm not able to Login. After entering password and hit Enter it switched to the Login-Screen back (same as in KDE in my previous post). Here ist a video:
https://cloud.olafdressler.de/index.php ... 7SaisSWppW
Here i've another video with the boot-process after hitting Ctrl+D:
https://cloud.olafdressler.de/index.php ... EQMJmkod55
Moderator: ridiculous formatting removed, use normal size or just bold. SPARINGLY. Thanks.
can you get the /etc/fstab file and the /var/log/minstall.log file from the installed system and post them?
fstab:
Code: Select all
# Pluggable devices are handled by uDev, they are not in fstab
UUID= / btrfs subvol=@,ssd,discard=async,noatime 1 1
UUID= /home btrfs subvol=@home,ssd,discard=async,noatime 1 2
UUID=8292-58C4 /boot/efi vfat noatime,dmask=0002,fmask=0113 0 0
/swapfile swap swap defaults 0 0
to big for forum, therfore an external link:
https://cloud.olafdressler.de/index.php ... wpeL3knCtG
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 8:29 am
by dolphin_oracle
@OlafD ok thanks. the UUID is not being populated. definintly a major bug.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 9:23 am
by Joseph DeGarmo
monsieurzik wrote: ↑Thu Jun 01, 2023 12:39 am
Joseph DeGarmo wrote: ↑Wed May 31, 2023 7:35 pm
monsieurzik wrote: ↑Wed May 31, 2023 3:23 pm
Mintstick doesn’t make the trick. Failure again. Will try with mx usb maker.
Edit 21:55 : MX USB Maker failed too.
That's weird. Fedora Media Writer worked for me. And it requires Fedora. I'll boot up Linux Mint tomorrow and try it for myself. I'll also try it out on my MX-21 laptop. Have you tried Balena Etcher? I heard it's quite good.
Already tried. In vain.
I can confirm that MX Live USB Maker worked just fine for me. Perhaps you need to try a different USB device.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 10:20 am
by zebedeeboss
Hi :D
64 bit XFCE - manual partitioning via gparted before starting the installer. This SSD will share more than one Linux OS.
Still no change with Nvidia RTX4070 not being recognised.
Code: Select all
sudo ddm-mx -i nvidia -f nvidia-driver
works to install nvidia-525
Will continue testing the rest of the system for general day to day and game use via steam.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: PC Specialist product: Amd X399 Overclocked v: N/A
serial: <superuser required>
Mobo: ASUSTeK model: PRIME X399-A v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 1203 date: 10/09/2019
CPU:
Info: model: AMD Ryzen Threadripper 2950X bits: 64 type: MT MCP MCM arch: Zen+ gen: 2 level: v3
note: check built: 2018-21 process: GF 12nm family: 0x17 (23) model-id: 8 stepping: 2
microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 4 threads: 32 dies: 2 smt: enabled cache: L1: 1.5 MiB
desc: d-16x32 KiB; i-16x64 KiB L2: 8 MiB desc: 16x512 KiB L3: 32 MiB desc: 4x8 MiB
Speed (MHz): avg: 2182 high: 2250 min/max: 2200/4000 boost: disabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2250 3: 1687 4: 2200 5: 2200 6: 2200
7: 2198 8: 2194 9: 2200 10: 2200 11: 2200 12: 2200 13: 2200 14: 2200 15: 2200 16: 2200 17: 2200
18: 2200 19: 2200 20: 2200 21: 2118 22: 2198 23: 2201 24: 2200 25: 2200 26: 2198 27: 2200
28: 2200 29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 255962
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: N/A status: unknown device ID pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 42:00.0 chip-ID: 10de:2786 class-ID: 0300
Device-2: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 7-1:2
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1355x381mm (53.35x15.00")
s-diag: 1408mm (55.42")
Monitor-1: DP-0 pos: primary,left res: 2560x1440 dpi: 55 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
Monitor-2: DP-2 pos: right res: 2560x1440 dpi: 55 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA Graphics Device/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 5-4:3
chip-ID: 0951:16ad pcie: class-ID: 0300 gen: 3 serial: <filter> speed: 8 GT/s lanes: 16
bus-ID: 0c:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 42:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: Kingston HyperX Cloud Revolver S type: USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 7-1:2
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 05:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: 1000 bus-ID: 0a:00.0 chip-ID: 10ec:8161 class-ID: 0200
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 5.49 TiB used: 8.03 GiB (0.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 34.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: SBM02103 temp: 24.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT2000MX500SSD1 size: 1.82 TiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q
scheme: GPT
ID-6: /dev/sdd maj-min: 8:48 type: USB vendor: SanDisk model: Ultra USB 3.0 size: 28.64 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 300 GiB size: 294.23 GiB (98.08%) used: 8.03 GiB (2.7%) fs: ext4 dev: /dev/sdc3
maj-min: 8:35
ID-2: /boot/efi raw-size: 600 MiB size: 598.8 MiB (99.80%) used: 288 KiB (0.0%) fs: vfat
dev: /dev/sdc1 maj-min: 8:33
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdc2
maj-min: 8:34
Sensors:
System Temperatures: cpu: 38.0 C mobo: 26.0 C gpu: nvidia temp: 44 C
Fan Speeds (RPM): cpu: 774 case-1: 0 case-2: 0 case-3: 0 gpu: nvidia fan: 0%
Power: 12v: 12.10 5v: N/A 3.3v: N/A vbat: 3.14
Repos:
Packages: pm: dpkg pkgs: 2152 libs: 1120 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 467 Uptime: 9m wakeups: 1 Memory: 62.64 GiB used: 2.98 GiB (4.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 11:52 am
by zebedeeboss
Hi,
any idea why
https://imgur.com/SJdVVuR.png it auto picks 3840x1080 screen res when native is 5120x1440.
Could it be that the monitor is set to 240Hz and this is the highest res Linox can cope with. Manually pick 5120x1440 and it works fine but drops down to 120Hz
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:12 pm
by markol
Plasma 5.27.5 !!! Thank you!
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:23 pm
by dolphin_oracle
zebedeeboss wrote: ↑Fri Jun 02, 2023 11:52 am
Hi,
any idea why
https://imgur.com/SJdVVuR.png it auto picks 3840x1080 screen res when native is 5120x1440.
Could it be that the monitor is set to 240Hz and this is the highest res Linox can cope with. Manually pick 5120x1440 and it works fine but drops down to 120Hz
could be. xfce usually picks whatever X thinks is the default state for the monitor, or the limit for the driver (usually only applies to vesa, but I guess could be any xorg driver). you can see the modes with xrandr.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:24 pm
by OlafD
xfce 64bit
Fresh install, first start. Some Buttons have no distance to the window frame.
Image:
https://cloud.olafdressler.de/index.php ... N3eMAatdbE
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 12:27 pm
by zebedeeboss
dolphin_oracle wrote: ↑Fri Jun 02, 2023 12:23 pm
zebedeeboss wrote: ↑Fri Jun 02, 2023 11:52 am
Hi,
any idea why
https://imgur.com/SJdVVuR.png it auto picks 3840x1080 screen res when native is 5120x1440.
Could it be that the monitor is set to 240Hz and this is the highest res Linux can cope with. Manually pick 5120x1440 and it works fine but drops down to 120Hz
could be. xfce usually picks whatever X thinks is the default state for the monitor, or the limit for the driver (usually only applies to vesa, but I guess could be any xorg driver). you can see the modes with xrandr.
indeed
Code: Select all
zebedee@mx23-2950x:~
$ xrandr
Screen 0: minimum 8 x 8, current 8960 x 2160, maximum 32767 x 32767
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 connected 5120x1440+0+0 (normal left inverted right x axis y axis) 1mm x 1mm
3840x1080 59.97 + 239.97 119.97
5120x1440 120.00* 59.98
2560x1440 239.90 120.00 59.95
2560x1080 119.88 60.00 59.94
1920x1080 119.88 60.00 59.94
1680x1050 59.95
1600x900 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 connected 3840x2160+5120+0 (normal left inverted right x axis y axis) 708mm x 399mm
3840x2160 60.00*+ 59.94 50.00 29.98 29.97 25.00 23.98
2560x1440 59.95
1920x1080 60.00 59.94 50.00 29.97 25.00 23.98
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-5 disconnected (normal left inverted right x axis y axis)
zebedee@mx23-2950x:~
$
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 1:11 pm
by dolphin_oracle
zebedeeboss wrote: ↑Fri Jun 02, 2023 12:27 pm
dolphin_oracle wrote: ↑Fri Jun 02, 2023 12:23 pm
zebedeeboss wrote: ↑Fri Jun 02, 2023 11:52 am
Hi,
any idea why
https://imgur.com/SJdVVuR.png it auto picks 3840x1080 screen res when native is 5120x1440.
Could it be that the monitor is set to 240Hz and this is the highest res Linox can cope with. Manually pick 5120x1440 and it works fine but drops down to 120Hz
could be. xfce usually picks whatever X thinks is the default state for the monitor, or the limit for the driver (usually only applies to vesa, but I guess could be any xorg driver). you can see the modes with xrandr.
indeed
Code: Select all
zebedee@mx23-2950x:~
$ xrandr
Screen 0: minimum 8 x 8, current 8960 x 2160, maximum 32767 x 32767
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 connected 5120x1440+0+0 (normal left inverted right x axis y axis) 1mm x 1mm
3840x1080 59.97 + 239.97 119.97
5120x1440 120.00* 59.98
2560x1440 239.90 120.00 59.95
2560x1080 119.88 60.00 59.94
1920x1080 119.88 60.00 59.94
1680x1050 59.95
1600x900 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 connected 3840x2160+5120+0 (normal left inverted right x axis y axis) 708mm x 399mm
3840x2160 60.00*+ 59.94 50.00 29.98 29.97 25.00 23.98
2560x1440 59.95
1920x1080 60.00 59.94 50.00 29.97 25.00 23.98
1680x1050 59.95
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.81
1280x720 60.00 59.94 50.00
1024x768 75.03 60.00
800x600 75.00 60.32
720x576 50.00
720x480 59.94
640x480 75.00 59.94 59.93
DP-5 disconnected (normal left inverted right x axis y axis)
zebedee@mx23-2950x:~
$
yep, the higher refresh rate one is marked as preferred by X, so that's why.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 1:16 pm
by Joseph DeGarmo
Any idea on when this will get a stable release? I'm also watching for LMDE 6. If MX-23 gets pushed out soon enough, then I would replace my Fedora build with the KDE version of it.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 1:20 pm
by dolphin_oracle
Joseph DeGarmo wrote: ↑Fri Jun 02, 2023 1:16 pm
Any idea on when this will get a stable release? I'm also watching for LMDE 6. If MX-23 gets pushed out soon enough, then I would replace my Fedora build with the KDE version of it.
when we are done
seriously, sometime after debian 12 is released. It will also depend on dev team schedules.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 1:54 pm
by siamhie
markol wrote: ↑Fri Jun 02, 2023 12:12 pm
Plasma 5.27.5 !!! Thank you!
@markol If you have kept MX-23 KDE beta1 updated you should be running 5.27.5 already. I tested it yesterday on the live ISO.
plasma-desktop 4:5.27.5-2 MIGRATED to testing
https://tracker.debian.org/news/1432699 ... o-testing/
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 4:27 pm
by markol
A bit of misunderstanding... I was thanking the devs for this! Just got the updates (still running in a VM)
Oh, and a question: Is Debian soon-to-be-stable getting the latest Plasma or will they stick to 5.27.2?
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 5:18 pm
by siamhie
markol wrote: ↑Fri Jun 02, 2023 4:27 pm
A bit of misunderstanding... I was thanking the devs for this! Just got the updates (still running in a VM)
Oh, and a question: Is Debian soon-to-be-stable getting the latest Plasma or will they stick to 5.27.2?
@markol It looks to be 5.27.5 but don't quote me on that.
https://packages.debian.org/bookworm/kde/
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 8:41 pm
by Antediluvian
iDeviceMounter doesn't work for the two iPhones I tested: a 7 Plus on iOS 15.7.6 and a SE 2020 on 16.5. I was running MX-23 beta-1 live. That said, I can't get iDeviceMounter to work on MX21.3 or MX19.4 either. On 19.4 the iName and UUID boxes populate but the Mount button has no effect. On 23 beta 1 and 21.3 the iName and UUID boxes do not populate and the Rescan and Mount buttons have no effect. If this MX app isn't one you want feedback on at this time then please ignore.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_US kbd=us
tz=America/Los_Angeles persist_root splasht
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: LENOVO product: 20BWS0S500 v: ThinkPad T450s serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 20BWS0S500 v: SDK0E50510 WIN serial: <superuser required> UEFI: LENOVO
v: JBET73WW (1.37 ) date: 08/14/2019
Battery:
ID-1: BAT0 charge: 13.8 Wh (67.0%) condition: 20.6/23.2 Wh (89.0%) volts: 11.2 min: 11.1
model: SONY 45N1111 type: Li-poly serial: <filter> status: discharging
ID-2: BAT1 charge: 0.9 Wh (5.9%) condition: 15.3/23.2 Wh (66.2%) volts: 11.0 min: 11.1
model: SANYO 45N1775 type: Li-ion serial: <filter> status: not charging
Device-1: hidpp_battery_1 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i5-5300U bits: 64 type: MT MCP arch: Broadwell gen: core 5 level: v3
note: check built: 2015-18 process: Intel 14nm family: 6 model-id: 0x3D (61) stepping: 4
microcode: 0x2D
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1099 high: 1101 min/max: 500/2900 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1099 2: 1101 3: 1098 4: 1098 bogomips: 18358
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics:
Device-1: Intel HD Graphics 5500 vendor: Lenovo driver: i915 v: kernel arch: Gen-8
process: Intel 14nm built: 2014-15 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:1616 class-ID: 0300
Device-2: Lite-On Integrated Camera type: USB driver: uvcvideo bus-ID: 2-8:6 chip-ID: 04ca:703c
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: LG Display 0x046d built: 2014 res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2
size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 5500 (BDW GT2)
direct-render: Yes
Audio:
Device-1: Intel Broadwell-U Audio vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 00:03.0
chip-ID: 8086:160c class-ID: 0403
Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Lenovo driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9ca0 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I218-LM vendor: Lenovo driver: e1000e v: kernel port: 3080
bus-ID: 00:19.0 chip-ID: 8086:15a2 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:095b class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 2-7:5
chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 1000 hci-v: 4.2 rev: 1000
Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 411.88 GiB used: 2.68 GiB (0.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS128GMTS430S size: 119.24 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 3A scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT250MX500SSD1 size: 232.89 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 022 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Samsung model: Flash Drive FIT size: 59.75 GiB
block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1100 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 4.66 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
maj-min: 8:3
Sensors:
System Temperatures: cpu: 48.0 C pch: 51.0 C mobo: N/A
Fan Speeds (RPM): fan-1: 0
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 212 Uptime: 56m wakeups: 29 Memory: 11.56 GiB used: 3 GiB (25.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 9:20 pm
by Jerry3904
That's helpful--thanks. We have other reports of problems with this app, including by its original developer, so we will be looking closely at it.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 02, 2023 11:37 pm
by i_ri
hello dolphin_oracle and everyone
Difference
of fluxbox 1.3.8-2 and 1.3.7+git20220731-0 over 1.3.7-1
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 1:03 am
by Jaki
Please add drivers for the old card NVIDIA Corporation G84GLM [Quadro NVS 320M]
In MX 21.3 they were included (nvidia 340) but the new MX 23 system unfortunately does not have them and my laptop will be thrown away.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 1:34 am
by Freja
340 driver may not be included in MX23. Because there is no guarantee that a 340driver will be made for bookworm.
The MX-21.3 still has many years of support in future. You can use it without throwing it away.
I have an MX21.3 machine running the 340 driver and will be sticking with 21.3 without upgrading.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 8:41 am
by Joseph DeGarmo
Wow! MX-23 beta got Plasma 5.27.5 and Fedora 37 is stuck on Plasma 5.27.4 forever. How embarrassing.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 8:52 am
by Jaki
Currently I am also using MX21.3 but as I see in Debian 12 "Bookworm" there are newer packages. In Debian 11 "Bullseye" there are also no nvidia 340 drivers as standard, but in MX 21 they appeared, so I went back to MX linux. I think that if there were also drivers for Nvidia 340 in the new MX 23, there would be more users with these old Nvidia cards.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 9:15 am
by MintHawk
As mentioned in Help, I made a persistent live USB with MX23 Beta 1, but I have to input 0 every time I log in so as to get into my persistent live USB environment.
This USB was made with Rufus on Windows 10 and was modified with the F keys while booting it.
I made the same persistent live USB but with MX21.3 this time and through the live USB maker app in MX 21.3.
It works fine, so I don't have to manually enter 0 to boot into it now. Nevertheless, the USB stick is not super responsive.
I'll try the Beta 1 MX23 on another USB stick through Live USB maker this time to see if it behaves as it should.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 9:15 am
by AK-47
Joseph DeGarmo wrote: ↑Sat Jun 03, 2023 8:41 am
Wow! MX-23 beta got Plasma 5.27.5 and Fedora 37 is stuck on Plasma 5.27.4 forever. How embarrassing.
Upgrade to Fedora KDE 38, there's Plasma 5.27.5 in it. Good Wayland session (on my machine anyway) and sddm 0.20 which can run with native Wayland. Surprised to hear they didn't package 5.27.5 for Fedora 37 though.
And when you do, be sure to install and use
dnf5, it's a lot better than the old dnf!
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 9:45 am
by siamhie
Jaki wrote: ↑Sat Jun 03, 2023 8:52 am
Currently I am also using MX21.3 but as I see in Debian 12 "Bookworm" there are newer packages. In Debian 11 "Bullseye" there are also no nvidia 340 drivers as standard, but in MX 21 they appeared, so I went back to MX linux. I think that if there were also drivers for Nvidia 340 in the new MX 23, there would be more users with these old Nvidia cards.
@Jaki
Version 340.108 (legacy GPUs) (supported devices)
Older legacy driver, for GeForce 8 series through GeForce 300 series. No Vulkan support, supports up to OpenGL 3.3 depending on your card.
Use of the 340-series driver is strongly discouraged. It is not included in stable releases of Debian anymore, has serious unfixable security vulnerabilities,
and may not be updated for new kernels in a timely manner. You are highly recommended to use the built-in Nouveau driver if security is a priority.
https://wiki.debian.org/NvidiaGraphicsDrivers
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 10:02 am
by MintHawk
Persistent live USB on MX23 Beta 1 works fine.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 12:32 pm
by Joseph DeGarmo
AK-47 wrote: ↑Sat Jun 03, 2023 9:15 am
Joseph DeGarmo wrote: ↑Sat Jun 03, 2023 8:41 am
Wow! MX-23 beta got Plasma 5.27.5 and Fedora 37 is stuck on Plasma 5.27.4 forever. How embarrassing.
Upgrade to Fedora KDE 38, there's Plasma 5.27.5 in it. Good Wayland session (on my machine anyway) and sddm 0.20 which can run with native Wayland. Surprised to hear they didn't package 5.27.5 for Fedora 37 though.
And when you do, be sure to install and use
dnf5, it's a lot better than the old dnf!
No, that computer is NOT upgrading to Fedora 38. It's moving to MX-23 KDE and/or LMDE 6.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 1:29 pm
by dolphin_oracle
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 10:26 am
dolphin_oracle wrote: ↑Thu Jun 01, 2023 10:22 am
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 10:16 am
just a suggestion. Why not mx 23 Kde Plasma move to kio-admin instead of kde-servicemenu-rootactions by default???
what is the reason to do that?
kde plasma 5.27.5 has all the functionality by default, which is provided by kde-servicemenu-rootactions, I am not sure whether kde-servicemenu-rootactions package is maintained upstream or not. kio-admin package is available in debian 12, it also enables root menu action in dolphin and other graphical applications on right click.
unless i'm missing something kio-admin provides the "Open as administrator" menu entry in dolphin, but not the other root actions.
I'm OK either way, but they don't appear to be 1-for-1 at first glance.
@Adrian
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 1:32 pm
by dolphin_oracle
OlafD wrote: ↑Fri Jun 02, 2023 8:23 am
dolphin_oracle wrote: ↑Fri Jun 02, 2023 7:58 am
OlafD wrote: ↑Fri Jun 02, 2023 5:24 am
xfce with btrfs and subvolumes @root and @home: boot-problmes and unable to login
Macbook 11,1 from 2012/2013 8same as in my last post:
viewtopic.php?p=726957#p726957
I can't make QSI because i'm unable to login.
Installed xfce 64 bit UEFI with standard install specs.
Restart after Installing shows prompt with the choice of "maintenance mode". I cancel it with Ctrl+D. Also you can see the slow Boot-Logo live. And i'm not able to Login. After entering password and hit Enter it switched to the Login-Screen back (same as in KDE in my previous post). Here ist a video:
https://cloud.olafdressler.de/index.php ... 7SaisSWppW
Here i've another video with the boot-process after hitting Ctrl+D:
https://cloud.olafdressler.de/index.php ... EQMJmkod55
Moderator: ridiculous formatting removed, use normal size or just bold. SPARINGLY. Thanks.
can you get the /etc/fstab file and the /var/log/minstall.log file from the installed system and post them?
fstab:
Code: Select all
# Pluggable devices are handled by uDev, they are not in fstab
UUID= / btrfs subvol=@,ssd,discard=async,noatime 1 1
UUID= /home btrfs subvol=@home,ssd,discard=async,noatime 1 2
UUID=8292-58C4 /boot/efi vfat noatime,dmask=0002,fmask=0113 0 0
/swapfile swap swap defaults 0 0
to big for forum, therfore an external link:
https://cloud.olafdressler.de/index.php ... wpeL3knCtG
we've addressed this bug in the latest mx-installer coming soonish.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 2:33 pm
by dolphin_oracle
MadMax wrote: ↑Mon May 29, 2023 4:40 am
Alright, sounds good. I'm familiar with cryptsetup, so that's no problem.
Let's continue.
7. when trying to install "veracrypt" from MXPI popular apps I get the following error. The package is not present in a repository.
Code: Select all
Unable to apply some actions, aborting
Couldn't find any package matching "veracrypt", but there are 26 packages which contain "veracrypt" in their description:
8. David Batch processor crashes GIMP when closing it (after installing GIMP Full from MXPI popular apps), probably not a MX problem, but a problem of the plugin.
9. I used to install Discord and Skype as flatpaks. How are they installed from MXPI popular apps? I noticed it downloads a deb file and then installs it manually. Do I still get updates that way?
EDIT:
10. fsearch is not in the repositories. I think it is/was in the MX 19 repos. Did it get removed?
Overall I have to say, the beta runs really well. Autostart for both Skype and Discord do work properly (didn't work with the flatpaks in MX19, but was also no big issue for me), editing boot options worked, uninstalling Thunderbird and LibreOffice worked. Keyring recognition works (keyring gets the user password as its password) for Google Chrome and Discord.
I also installed the Faba icon theme and switched the WM theme to Greybird-mx and I'm feeling at home already
I will keep mx-comfort for the window frames, though. Really like the unintrusive design. I'm looking forward to the final release.
wine and veracrypt should now both be installable from popular apps or any other package manager.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 4:42 pm
by siamhie
@Jerry3904 and
@dolphin_oracle and other fluxers.
I came across an issue regarding "Recent files" in the root menu with MX-23 fluxbox-b1. (hope it's not to late to fix/implement)
I couldn't delete any entry that was present. (I spent an hour on this and it turned out to be a syntax error...doh)
quickshot0.png
Turns out the [include] variable in MX23-fluxbox-beat1 (points to ~/.fluxbox/submenus/recent_files_menu)
quickshot1.png
whereas the {exclude} variable in MX23-fluxbox-beat1 (points to ~/,fluxbox/scripts/recentfiles_menu)
quickshot2.png
They should both point to ~/.fluxbox/scripts/recentfiles-fbmenu (for it to work).
Code: Select all
[code][submenu] (Recent files)
[include] ([submenu] (Recent files)
[include] (~/.fluxbox/scripts/recentfiles-fbmenu)
[separator]
[exec] (Update) {~/.fluxbox/scripts/recentfiles-fbmenu}
[end])
[separator]
[exec] (Update) {~/.fluxbox/scripts/recentfiles-fbmenu}
[end]
[/code]
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 5:05 pm
by Jerry3904
Well! I wonder how that snuck in there? I'm a bit confused b/c this is what the script has:
Code: Select all
menupath=~/.fluxbox/submenus/recent_files_menu
Will check--not too late. Thanks.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 5:39 pm
by andy
Hello,
grateful thank you for work on MX23.
I was waiting eagerly since beginning of the year.
One bug report:
On Lenovo ThinkPad Edge, system cannot wake up from sleep (no hibernation).
It seems frozen, no keystroke is registered, and power button press is ignored. The only way is force power off, holding pwrbtn more seconds.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: LENOVO product: 20EV000VXS v: ThinkPad E560 serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 20EV000VXS v: SDK0J40705 WIN serial: <superuser required> UEFI: LENOVO
v: R00ET69W (1.44 ) date: 06/13/2022
Battery:
ID-1: BAT0 charge: 30.8 Wh (100.0%) condition: 30.8/47.5 Wh (64.9%) volts: 12.4 min: 10.8
model: SANYO LNV-45N1 type: Li-ion serial: <filter> status: not charging
CPU:
Info: model: Intel Core i5-6200U bits: 64 type: MT MCP arch: Skylake gen: core 6 level: v3
note: check built: 2015 process: Intel 14nm family: 6 model-id: 0x4E (78) stepping: 3
microcode: 0xF0
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 600 min/max: 400/2800 scaling: driver: intel_pstate governor: powersave
cores: 1: 600 2: 600 3: 600 4: 600 bogomips: 19200
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915 v: kernel arch: Gen-9
process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 1-7:3 chip-ID: 04f2:b541
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: BOE Display 0x0630 built: 2015 res: 1920x1080 hz: 60 dpi: 142
gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 520 (SKL GT2)
direct-render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d70 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: off with: 1: pipewire-pulse status: off 2: wireplumber
status: off 3: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Ethernet I219-V vendor: Lenovo driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:1570 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:3166 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-6:2
chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 1000 hci-v: 4.2 rev: 1000
Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: object transfer
Drives:
Local Storage: total: 931.51 GiB used: 17.18 GiB (1.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: GPT
Partition:
ID-1: / raw-size: 43.93 GiB size: 42.94 GiB (97.74%) used: 15.56 GiB (36.2%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 1.5 GiB size: 1.44 GiB (96.05%) used: 50.3 MiB (3.4%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-3: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-4: /home raw-size: 195.3 GiB size: 191.17 GiB (97.89%) used: 1.57 GiB (0.8%) fs: ext4
dev: /dev/dm-1 maj-min: 253:1 mapped: 1.home.fsm
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 47.0 C pch: 37.0 C mobo: 0.0 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Repos:
Packages: pm: dpkg pkgs: 2637 libs: 1511 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/signal-xenial-added-by-mxpi.list
1: deb [arch=amd64] https://updates.signal.org/desktop/apt xenial main
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http://repository.spotify.com stable non-free
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb https://apt.syncthing.net/ syncthing stable
Info:
Processes: 204 Uptime: 11m wakeups: 2 Memory: 15.5 GiB used: 2.16 GiB (13.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 5:44 pm
by andy
And another bug after running VeraCrypt GUI, installed from MXPI.
Code: Select all
ASSERT INFO:
./src/common/sizer.cpp(2288): assert "CheckSizerFlags(!((flags) & (wxALIGN_RIGHT | wxALIGN_CENTRE_HORIZONTAL | wxALIGN_BOTTOM | wxALIGN_CENTRE_VERTICAL)))" failed in DoInsert(): wxALIGN_RIGHT | wxALIGN_CENTRE_HORIZONTAL | wxALIGN_BOTTOM | wxALIGN_CENTRE_VERTICAL will be ignored in this sizer: wxEXPAND overrides alignment flags in box sizers
DO NOT PANIC !!
If you're an end user running a program not developed by you, please ignore this message, it is harmless, and please try reporting the problem to the program developers.
You may also set WXSUPPRESS_SIZER_FLAGS_CHECK environment variable to suppress all such checks when running this program.
If you're the developer, simply remove this flag from your code to avoid getting this message. You can also call wxSizerFlags::DisableConsistencyChecks() to globally disable all such checks, but this is strongly not recommended.
BACKTRACE:
[1] wxBoxSizer::DoInsert(unsigned long, wxSizerItem*)
[2] wxEntry(int&, wchar_t**)
[3] __libc_start_main
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 8:39 pm
by siamhie
Jerry3904 wrote: ↑Sat Jun 03, 2023 5:05 pm
Well! I wonder how that snuck in there? I'm a bit confused b/c this is what the script has:
Code: Select all
menupath=~/.fluxbox/submenus/recent_files_menu
@Jerry3904 I double checked it by loading the live MX-23-flubox ISO (which is where I got the white images- 2nd and 3rd) in my post.
Seems the [include] variable doesn't exist. "submenus/recent_files_menu"
but the [exec] (Update) does. scripts/recentfiles-fbmenu
Will check--not too late. Thanks.
Thank you...
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 9:01 pm
by Jerry3904
Code: Select all
Seems the [include] variable doesn't exist. "submenus/recent_files_menu"
I suspect that is generated during installation, one reason I want to check the b1.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 9:04 pm
by Jerry3904
@ceeslans @kobaian @Melber @dolphin_oracle @i_ri
Are we good to go with the updated mx-idesktool for the b2 or rc, whichever comes next?
https://github.com/jerry3904/mx-ideskto ... -idesktool
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 10:38 pm
by dolphin_oracle
if it works there is no reason to wait. we can push it out anytime.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 03, 2023 10:58 pm
by i_ri
Hello dolphin_oracle and Jerry3904
line 510 change to TEXT19
line 511 does that need = an equal sign cause selection? --file-selection="${iconplaceholder}"
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 12:13 am
by FullScale4Me
MXPI - Popular Applications
Sunflower - 'couldn't find any package matching "sunflower", but there are 1 packages which contain "sunflower" in their description:'
click on 'Show details' -- empty.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 12:55 am
by gurpreetkapoor
dolphin_oracle wrote: ↑Sat Jun 03, 2023 1:29 pm
gurpreetkapoor wrote: ↑Thu Jun 01, 2023 10:26 am
dolphin_oracle wrote: ↑Thu Jun 01, 2023 10:22 am
what is the reason to do that?
kde plasma 5.27.5 has all the functionality by default, which is provided by kde-servicemenu-rootactions, I am not sure whether kde-servicemenu-rootactions package is maintained upstream or not. kio-admin package is available in debian 12, it also enables root menu action in dolphin and other graphical applications on right click.
unless i'm missing something kio-admin provides the "Open as administrator" menu entry in dolphin, but not the other root actions.
I'm OK either way, but they don't appear to be 1-for-1 at first glance. @Adrian
Plasma 5.27.5 already have all that. If you need to edit file in root partition, just go to that file in non-root dolphin and open the file in any editor without root. It will prompt you for sudo password at the time of saving. so no need to open separate root dolphin.
@Adrian
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 1:53 am
by m_pav
andy wrote: ↑Sat Jun 03, 2023 5:39 pm
On Lenovo ThinkPad Edge, system cannot wake up from sleep (no hibernation).
It seems frozen, no keystroke is registered, and power button press is ignored. The only way is force power off, holding pwrbtn more seconds.
Check your BIOS settings, if you're using Intel PTT, which is host OS based, try changing it to TPM2.0 which is hardware based.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 3:36 am
by andy
m_pav wrote: ↑Sun Jun 04, 2023 1:53 am
andy wrote: ↑Sat Jun 03, 2023 5:39 pm
On Lenovo ThinkPad Edge, system cannot wake up from sleep (no hibernation).
It seems frozen, no keystroke is registered, and power button press is ignored. The only way is force power off, holding pwrbtn more seconds.
Check your BIOS settings, if you're using Intel PTT, which is host OS based, try changing it to TPM2.0 which is hardware based.
Indeed. You are spot on.
So it seems no TPM 2.0 functionality for me on this machine. (According to UEFI firmware it supports TPM 2.0 only via Intel PTT.)
Thank you.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 3:58 am
by AK-47
Joseph DeGarmo wrote: ↑Sat Jun 03, 2023 12:32 pmNo, that computer is NOT upgrading to Fedora 38. It's moving to MX-23 KDE and/or LMDE 6.
I'm probably going to do the same thing with my machine. Only reason for me to be on Fedora is a usable KDE Wayland session (can't stand the X11 input/output lag), but now that MX Linux has KDE 5.27.5 that advantage may be gone. Even the difference between kernel 6.1.x and 6.3.x isn't that noticeable.
I still use MX Linux for most of my VMs because Fedora hogs up all the memory (4GB) I allocate to them.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 4:36 am
by operadude
For Beta-1, on both Xfce & KDE installs:
1. Applications Menu -> Internet: No Firefox Entry (installed & working)
2. MXPI -> Popular Applications -> Video: VLC Unchecked (installed & working)
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 5:51 am
by ibm450
Joseph DeGarmo wrote: ↑Sat Jun 03, 2023 12:32 pm
AK-47 wrote: ↑Sat Jun 03, 2023 9:15 am
Joseph DeGarmo wrote: ↑Sat Jun 03, 2023 8:41 am
Wow! MX-23 beta got Plasma 5.27.5 and Fedora 37 is stuck on Plasma 5.27.4 forever. How embarrassing.
Upgrade to Fedora KDE 38, there's Plasma 5.27.5 in it. Good Wayland session (on my machine anyway) and sddm 0.20 which can run with native Wayland. Surprised to hear they didn't package 5.27.5 for Fedora 37 though.
And when you do, be sure to install and use
dnf5, it's a lot better than the old dnf!
No, that computer is NOT upgrading to Fedora 38. It's moving to MX-23 KDE and/or LMDE 6.
Yes I agree fedora 38 is a total flop. Never had so many issues with a distro release like f38. Might try osblue with nvidia already baked into image or silver blue. Eagerly awaiting lmde6 and mx23.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 6:14 am
by OlafD
xfce 64bit:
MXPI popilar apps: xfce4-appfinder is unchecked but installed and working
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 6:37 am
by Jerry3904
Jerry3904 wrote: ↑Sat Jun 03, 2023 5:05 pm
Well! I wonder how that snuck in there? I'm a bit confused b/c this is what the script has:
Code: Select all
menupath=~/.fluxbox/submenus/recent_files_menu
Will check--not too late. Thanks.
Now on an installed b1. I see this working as written
Code: Select all
[submenu] (Recent files)
[include] (~/.fluxbox/submenus/recent_files_menu)
[separator]
[exec] (Update) {~/.fluxbox/scripts/recentfiles-fbmenu}
[end]
The first time the user clicks on "Recent files" the script generates .../submenus/recent_files_menu, and that looks to be populated correctly. Then clicking "Recent files" pops us a list of files that launch correctly. When I tried your method, I got nothing except the script itself and the css file.
EDIT: created a new user, and nothing at all happened after I clicked the "Update." Tried multiple times, nada. Then logged out/in and the file list was correctly displayed. Then opening and closing a file > updating Recent file--and that file is listed at the top. I would consider "fluxbox-remote restart" at the end of the script but not sure I want that firing off after update. But maybe...
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 6:57 am
by asqwerth
operadude wrote: ↑Sun Jun 04, 2023 4:36 am
For Beta-1, on both Xfce & KDE installs:
1. Applications Menu -> Internet:
No Firefox Entry (installed & working)...
I can't replicate this issue. FF is present in the whisker menu of my beta1 XFCE install. I haven't tested Plasma version.
ksnip_20230604-185335.png
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 7:33 am
by asqwerth
Joseph DeGarmo wrote: ↑Fri Jun 02, 2023 12:51 am
FullScale4Me wrote: ↑Thu Jun 01, 2023 9:54 pm
Attempt to install
Virtualbox 7.0.6-1 (vitualbox vitualbox-ext-pack vitualbox-guest-additions-iso)
....
I manually created the vboxusers group w GUID 1000 checked and added myself to it. The "
Internal Error, No file name for virtualbox-guest-additions-iso:amd64" error remained.
VirtualBox 7 is not yet compatible on Debian 12. Oracle will not release it to the Bookworm repositories until after it gets a stable release.
@FullScale4Me
Install Virtualbox via the MXPI
Popular Apps tab, and you won't have any issue with VB 7.0.6. No need to manually add your user to the vboxusers group. Everything is done for you.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 7:38 am
by Jerry3904
dolphin_oracle wrote: ↑Sat Jun 03, 2023 10:38 pm
if it works there is no reason to wait. we can push it out anytime.
The new version does work, but only with the new MX-23 idesk. Should be restricted to its presence, I think, but not sure how to do that.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 8:33 am
by OlafD
dolphin_oracle wrote: ↑Sat Jun 03, 2023 1:32 pm
we've addressed this bug in the latest mx-installer coming soonish.
Have made a snapshot from my running system (ext4) and made a live-usb, then installed it with btrfs. No failure notice anywhere, login works, timeshift runs with btrfs.
Many thanks!
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 8:33 am
by operadude
asqwerth wrote: ↑Sun Jun 04, 2023 6:57 am
operadude wrote: ↑Sun Jun 04, 2023 4:36 am
For Beta-1, on both Xfce & KDE installs:
1. Applications Menu -> Internet:
No Firefox Entry (installed & working)...
I can't replicate this issue. FF is present in the whisker menu of my beta1 XFCE install. I haven't tested Plasma version.
ksnip_20230604-185335.png
Weird.
I'll check again, for both Xfce & KDE.
I'll Get back to the thread in a while.
Thanks for checking.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 9:35 am
by asqwerth
Compiz is no longer in Popular Apps, so I just installed whatever MX21 installed packages were generated by UIP. This list didn't include emerald, and it wasn't installed when I installed the listed packages using UIP (I thought it would be pulled in as a dependency, but no).
After I manually installed emerald, I ran UIP again. It still isn't listed in the list of installed packages. Very weird.
ksnip_20230604-213010.png
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 11:46 am
by operadude
operadude wrote: ↑Sun Jun 04, 2023 8:33 am
asqwerth wrote: ↑Sun Jun 04, 2023 6:57 am
operadude wrote: ↑Sun Jun 04, 2023 4:36 am
For Beta-1, on both Xfce & KDE installs:
1. Applications Menu -> Internet:
No Firefox Entry (installed & working)...
I can't replicate this issue. FF is present in the whisker menu of my beta1 XFCE install. I haven't tested Plasma version.
ksnip_20230604-185335.png
Weird.
I'll check again, for both Xfce & KDE.
I'll Get back to the thread in a while.
Thanks for checking.
First things first: My QSI:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2738 high: 2956 min/max: 800/3900 scaling: driver: intel_pstate
governor: powersave cores: 1: 2956 2: 2687 3: 2662 4: 2650 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 40.0 C
Device-2: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-8:6
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel bus-ID: 1-8:6
v: kernel bus-ID: 00:1f.3 chip-ID: 1d6c:1278 chip-ID: 8086:a2f0 class-ID: 0102 serial: <filter>
class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
Device-3: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.75 TiB used: 4.96 GiB (0.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 30.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-5: /dev/sdd maj-min: 8:48 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
ID-8: /dev/sdg maj-min: 8:96 type: USB model: Mass Storage Device size: 29.49 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A gpu: radeon temp: 40.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2032 libs: 1032 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 226 Uptime: 25m wakeups: 3 Memory: 31.3 GiB used: 2.33 GiB (7.4%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
OK, Firefox IS showing-up in the Apps (Whisker) Menu:
firefox_in_Apss_Menu.png
I think it's not showing-up in the case when I save with persistence (persist_root) and with boot option to save to RAM (toram). Not a big deal, as it is clearly installed, and there is a Firefox icon on my panel (at the top).
However, re: point #2:
VLC is already installed:
VLC_installed.png
MXPI shows it NOT installed:
MXPI_showing_VLC_not_installed.png
MXPI even let's me install it (over the current install):
MXPI_tries_to_install_VLC_again.png
So, again, not really an issue, as I wouldn't try to install a package that I already have; I would just ignore the empty check-box in MXPI.
Don't know if it's worth "fixing". Just putting it out there...
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 12:10 pm
by operadude
Here's my QSI, logged-in with: persist_root & toram:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash persist_root toram
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, plank wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 800 min/max: 800/3900 scaling: driver: intel_pstate governor: powersave
cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 41.0 C
Device-2: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-8:7
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel bus-ID: 1-8:7
v: kernel bus-ID: 00:1f.3 chip-ID: 1d6c:1278 chip-ID: 8086:a2f0 class-ID: 0102 serial: <filter>
class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
Device-3: HD WEBCAM NexiGo N660 FHD type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.75 TiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 31.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-4: /dev/sdc maj-min: 8:32 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB model: Mass Storage Device size: 29.49 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-8: /dev/sdl maj-min: 8:176 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A gpu: radeon temp: 41.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2407 libs: 1228 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 234 Uptime: 10m wakeups: 3 Memory: 31.3 GiB used: 7 GiB (22.4%) Init: SysVinit v: 3.06
runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
1. Same issue with VLC: in MXPI, showing UN-installed. See my previous post. Anyway...
2. Here, NO firefox showing in Whisker (Applications) Menu:
no_firefox_in_whisker_menu.png
Again, not really an issue for me, as there's a Firefox icon at the top of my panel:
firefox_on_panel.png
And, I have put Firefox Icon in Plank:
firefox_in_plank.png
This may be a moot point, since I am working off a LIVE-USB environment; perhaps once installed, all will be well. Again, not that I really need to see Firefox in the Whisker menu, anyway.
Maybe this Much Ado About Nothing.
Just wanted to report it anyway, and let you decide (OBVIOUSLY!)
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 1:15 pm
by OlafD
xfce 64 bit
Set my Power-Management -> Close lid: turn off screen
Set Tweaks -> screen-settings: xrandr scale 1,5.
All in all it works. When I close the lid and open it again, the original resolution is displayed again. Tweaks, however, still shows a scaling of 1.5. Only a click on "Apply" makes it appear again also at 1.5 (a bit blurry though, the blur goes away when I log out and log in again; was already like that in MX 21)
Code: Select all
Snapshot created on: 20230604_1254
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro rootflags=subvol=@ quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23 beta 1_x64 Libretto Juni 04 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 31.2 Wh (55.5%) condition: 56.2/71.5 Wh (78.5%) volts: 10.9 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: discharging cycles: 997
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 847 high: 937 min/max: 800/3100 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 800 2: 800 3: 937 4: 852 bogomips: 20799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1,
HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1707x1067 s-dpi: 96 s-size: 451x282mm (17.76x11.10") s-diag: 532mm (20.94")
Monitor-1: eDP-1 model: Apple Color LCD built: 2013 res: 1707x1067 hz: 60 dpi: 152 gamma: 1.2
size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10 modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: speed: Unknown lanes: 63 link-max:
gen: 6 speed: 64 GT/s bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:6
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 113 GiB used: 15.38 GiB (13.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
Partition:
ID-1: / raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 15.38 GiB (13.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 562 KiB (0.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 15.38 GiB (13.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 54.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2108 libs: 1071 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
Processes: 243 Uptime: 50m wakeups: 4 Memory: 7.67 GiB used: 3.73 GiB (48.7%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 6:06 pm
by FullScale4Me
asqwerth wrote: ↑Sun Jun 04, 2023 7:33 am
@FullScale4Me
Install Virtualbox via the MXPI
Popular Apps tab, and you won't have any issue with VB 7.0.6. No need to manually add your user to the vboxusers group. Everything is done for you.
OK, will do. I didn't take note exactly how in MXPI I got to the point where install was clicked then. I may have offered confusion with the extra details up front. With 13 years of help desk experiences I developed a habit of capturing a lot of fine detail.
So, apt purge virtualbox, then autoremove followed by .config and VM folders deletion.
Reinstalled via:
Still had a minor cough....being Unix not sure it means anything:
Code: Select all
Loading new virtualbox-7.0.6 DKMS files...
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Building for 6.1.0-9-amd64
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Building initial module for 6.1.0-9-amd64
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
Done.
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
/usr/sbin/dkms: line 2497: echo: write error: Broken pipe
I'll be more careful next time :-)
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 9:39 pm
by dolphin_oracle
@operadude
xfce4-appfinder and vlc mxpi entries should be resolved at next update of mx-packageinstaller-pkglist. thanks for the report.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 9:40 pm
by dolphin_oracle
FullScale4Me wrote: ↑Sun Jun 04, 2023 12:13 am
MXPI - Popular Applications
Sunflower - 'couldn't find any package matching "sunflower", but there are 1 packages which contain "sunflower" in their description:'
click on 'Show details' -- empty.
this should be resolved now.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 9:47 pm
by dolphin_oracle
zebedeeboss wrote: ↑Fri Jun 02, 2023 10:20 am
Hi :D
64 bit XFCE - manual partitioning via gparted before starting the installer. This SSD will share more than one Linux OS.
Still no change with Nvidia RTX4070 not being recognised.
Code: Select all
sudo ddm-mx -i nvidia -f nvidia-driver
works to install nvidia-525
Will continue testing the rest of the system for general day to day and game use via steam.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: PC Specialist product: Amd X399 Overclocked v: N/A
serial: <superuser required>
Mobo: ASUSTeK model: PRIME X399-A v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 1203 date: 10/09/2019
CPU:
Info: model: AMD Ryzen Threadripper 2950X bits: 64 type: MT MCP MCM arch: Zen+ gen: 2 level: v3
note: check built: 2018-21 process: GF 12nm family: 0x17 (23) model-id: 8 stepping: 2
microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 4 threads: 32 dies: 2 smt: enabled cache: L1: 1.5 MiB
desc: d-16x32 KiB; i-16x64 KiB L2: 8 MiB desc: 16x512 KiB L3: 32 MiB desc: 4x8 MiB
Speed (MHz): avg: 2182 high: 2250 min/max: 2200/4000 boost: disabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2250 3: 1687 4: 2200 5: 2200 6: 2200
7: 2198 8: 2194 9: 2200 10: 2200 11: 2200 12: 2200 13: 2200 14: 2200 15: 2200 16: 2200 17: 2200
18: 2200 19: 2200 20: 2200 21: 2118 22: 2198 23: 2201 24: 2200 25: 2200 26: 2198 27: 2200
28: 2200 29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 255962
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: N/A status: unknown device ID pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 42:00.0 chip-ID: 10de:2786 class-ID: 0300
Device-2: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 7-1:2
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1355x381mm (53.35x15.00")
s-diag: 1408mm (55.42")
Monitor-1: DP-0 pos: primary,left res: 2560x1440 dpi: 55 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
Monitor-2: DP-2 pos: right res: 2560x1440 dpi: 55 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA Graphics Device/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 5-4:3
chip-ID: 0951:16ad pcie: class-ID: 0300 gen: 3 serial: <filter> speed: 8 GT/s lanes: 16
bus-ID: 0c:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 42:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: Kingston HyperX Cloud Revolver S type: USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 7-1:2
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 05:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: 1000 bus-ID: 0a:00.0 chip-ID: 10ec:8161 class-ID: 0200
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 5.49 TiB used: 8.03 GiB (0.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 34.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: SBM02103 temp: 24.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT2000MX500SSD1 size: 1.82 TiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q
scheme: GPT
ID-6: /dev/sdd maj-min: 8:48 type: USB vendor: SanDisk model: Ultra USB 3.0 size: 28.64 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 300 GiB size: 294.23 GiB (98.08%) used: 8.03 GiB (2.7%) fs: ext4 dev: /dev/sdc3
maj-min: 8:35
ID-2: /boot/efi raw-size: 600 MiB size: 598.8 MiB (99.80%) used: 288 KiB (0.0%) fs: vfat
dev: /dev/sdc1 maj-min: 8:33
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdc2
maj-min: 8:34
Sensors:
System Temperatures: cpu: 38.0 C mobo: 26.0 C gpu: nvidia temp: 44 C
Fan Speeds (RPM): cpu: 774 case-1: 0 case-2: 0 case-3: 0 gpu: nvidia fan: 0%
Power: 12v: 12.10 5v: N/A 3.3v: N/A vbat: 3.14
Repos:
Packages: pm: dpkg pkgs: 2152 libs: 1120 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 467 Uptime: 9m wakeups: 1 Memory: 62.64 GiB used: 2.98 GiB (4.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
I'm at a bit of a loss on driver detection for your part, as the PCIID does not appear in nvidia's lists. very strange.
I could set up the installer tool so that it can offer to install nvidia-driver when it can't detect a part. your part is the first time I've seen a part not be in the PCIID lists.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 04, 2023 11:40 pm
by peter_li
Will and when yes when will Upgrading like "Upgrading from MX-19 to MX-21 without reinstalling"
https://mxlinux.org/wiki/system/upgradi ... stalling/ be possible? When and where mx23repo.asc repo key will published? How to solve the error when DKMS can not find net/ipx.h?
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 3:10 am
by OlafD
xfce 64bit
Every new login let the message apear: "you are connected to wifi/ethernet".
Even though I clicked on "Do not show this message again", it still keeps showing me this message when I log in.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 3:53 am
by kobaian
For the second time while updating my MX-Fluxbox 23 Beta, Nala freezes on 98% with "opening dpkg". The first time was the first update after installation. It results with a dpkg error and dpkg has to be manually reconfigured to fix this. Not sure if it is a problem with Nala or MX-updater, but I have never experienced such a behavior on MXFB-21 with apt, or even while testing MX-FB 23 alpha.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=/dev/sda3
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop Mobo: Gigabyte model: H81M-S2PV v: x.x serial: <superuser required>
BIOS: American Megatrends v: FB date: 06/20/2014
CPU:
Info: model: Intel Core i5-4670K bits: 64 type: MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
microcode: 0x28
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 977 high: 993 min/max: 800/3800 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 982 2: 957 3: 977 4: 993 bogomips: 27137
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK107GL [Quadro K2000] vendor: Hewlett-Packard driver: nvidia v: 470.182.03
non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
process: TSMC 28nm built: 2012-18 pcie: gen: 2 speed: 5 GT/s lanes: 8 link-max: lanes: 16
bus-ID: 01:00.0 chip-ID: 10de:0ffe class-ID: 0300
Device-2: Aveo USB2.0 Camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.2:6
chip-ID: 1871:0143 class-ID: 0102
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: nvidia gpu: nvidia display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 95 s-size: 513x292mm (20.20x11.50") s-diag: 590mm (23.24")
Monitor-1: DVI-I-1 res: 1920x1080 hz: 60 dpi: 96 size: 509x286mm (20.04x11.26")
diag: 584mm (22.99") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 470.182.03 renderer: Quadro K2000/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: Gigabyte 8
driver: snd_hda_intel bus-ID: 1-1.1:4 v: kernel chip-ID: 0d8c:013c bus-ID: 00:1b.0 class-ID: 0300
chip-ID: 8086:8c20 class-ID: 0403
Device-2: NVIDIA GK107 HDMI Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0e1b
class-ID: 0403
Device-3: C-Media CM108 Audio Controller type: USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: Aveo USB2.0 Camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.2:6
chip-ID: 1871:0143 class-ID: 0102
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 2.26 TiB used: 6.84 GiB (0.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT480BX500SSD1 size: 447.13 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 056 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM008-2UB102 size: 1.82 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 0001 scheme: MBR
Partition:
ID-1: / raw-size: 137.76 GiB size: 134.54 GiB (97.66%) used: 6.84 GiB (5.1%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A gpu: nvidia temp: 44 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 30%
Repos:
Packages: pm: dpkg pkgs: 1940 libs: 992 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.icm.edu.pl/pub/Linux/dist/antix-workspace/mx/repo/ bookworm main non-free
Info:
Processes: 197 Uptime: 2h 16m wakeups: 1 Memory: 15.57 GiB used: 2.16 GiB (13.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 6:36 am
by fehlix
kobaian wrote: ↑Mon Jun 05, 2023 3:53 am
For the second time while updating my MX-Fluxbox 23 Beta, Nala freezes on 98% with "opening dpkg".
Would be good to know what package was involved. Maybe post apt-history.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 6:50 am
by dolphin_oracle
fehlix wrote: ↑Mon Jun 05, 2023 6:36 am
kobaian wrote: ↑Mon Jun 05, 2023 3:53 am
For the second time while updating my MX-Fluxbox 23 Beta, Nala freezes on 98% with "opening dpkg".
Would be good to know what package was involved. Maybe post apt-history.
I noticed that in some cases it looks like the nala display just doesn't update. at one point the update was actually finished and nala didn't report as such. hitting enter closed the updater window. I've seen this when the update process files the entire terminal window, but not every time.
the update of ntpsec takes an epic amount of time.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 6:53 am
by kobaian
fehlix wrote: ↑Mon Jun 05, 2023 6:36 am
kobaian wrote: ↑Mon Jun 05, 2023 3:53 am
For the second time while updating my MX-Fluxbox 23 Beta, Nala freezes on 98% with "opening dpkg".
Would be good to know what package was involved. Maybe post apt-history.
Today's update:
Code: Select all
$ apt-history
2023-06-05 07:29:39 upgrade qt6-gtk-platformtheme:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:38 upgrade pipewire-setup-mx:all 23.05.05 23.05.10
2023-06-05 07:29:38 upgrade openssl:amd64 3.0.8-1 3.0.9-1
2023-06-05 07:29:38 upgrade mx-system:all 23.07.04mx23 23.07.06mx23
2023-06-05 07:29:38 upgrade mxfb-accessories:all 23.05.08mx23 23.05.09mx23
2023-06-05 07:29:37 upgrade mx-fluxbox-data:all 23.05.10mx23 23.05.11mx23
2023-06-05 07:29:37 upgrade mx-fluxbox:all 23.05.10mx23 23.05.11mx23
2023-06-05 07:29:37 upgrade mx-dockmaker:amd64 23.5.01 23.5.03
2023-06-05 07:29:37 upgrade libxfce4ui-common:all 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-05 07:29:37 upgrade libxfce4ui-2-0:amd64 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-05 07:29:36 upgrade qt6-qpa-plugins:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:36 upgrade libqt6widgets6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:36 upgrade libqt6sql6-sqlite:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:36 upgrade libqt6sql6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:36 upgrade libqt6network6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:36 upgrade libqt6gui6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:35 upgrade libqt6dbus6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:35 upgrade libqt6core6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:35 upgrade libqt6concurrent6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-05 07:29:35 upgrade libpackagekit-glib2-18:amd64 1.2.6-4 1.2.6-5
2023-06-05 07:29:35 upgrade libopenjp2-7:amd64 2.5.0-1+b1 2.5.0-2
2023-06-05 07:29:35 upgrade libcurl4:amd64 7.88.1-9 7.88.1-10
2023-06-05 07:29:35 upgrade libcurl3-gnutls:amd64 7.88.1-9 7.88.1-10
2023-06-05 07:29:35 upgrade libappstream4:amd64 0.16.1-1 0.16.1-2
2023-06-05 07:29:35 upgrade gir1.2-packagekitglib-1.0:amd64 1.2.6-4 1.2.6-5
2023-06-05 07:29:35 install dbus-user-session:amd64 <none> 1.14.6-1
2023-06-05 07:29:34 upgrade tzdata:all 2023c-4 2023c-5
2023-06-05 07:29:34 upgrade libssl3:amd64 3.0.8-1 3.0.9-1
2023-06-05 07:29:34 upgrade curl:amd64 7.88.1-9 7.88.1-10
2023-06-05 07:29:34 upgrade bash-config:amd64 23.03.01 23.06.01
2023-06-05 07:29:33 upgrade libselinux1:amd64 3.4-1+b5 3.4-1+b6
2023-06-05 07:29:33 upgrade adduser:all 3.133 3.134
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 7:07 am
by Afireal
Issue: EFI entries disappear on restart
While I was testing LiveCD features, I noticed a strange thing. After restarting from Beta 1 UEFI loading takes much longer time and ends with error like "no OS to boot". No matter how many times I restarted the machine, only after complete power off UEFI managed to detect all drives. I thought that it's something related to updated antiX/MX loader or smth like this, so I didn't think much about it.
However, I encountered the same issue after installation on testing HDD. But now UEFI only allows me to boot Beta 1 entries(MX23 and UEFI OS). So, now I need power off machine everytime to boot a primary OS. Yeah, I tried boot it with GRUB shipped with installation (osprober has already added an entry). The thing is that GRUB reports "no such device", but booted Beta 1 can mount this drives.
I don't really remember such problems with dual-boot on MX21. I could reproduce this issue on other machines, but it's the only one with UEFI. Also, there is some similar
thread in arch forum. It's something about restart modes, but I don't really knowledgeable about kernel internal stuff.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
resume=UUID=<filter> resume_offset=712704
init=/lib/systemd/systemd
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: M5A97 LE R2.0 v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 2501 date: 04/09/2014
CPU:
Info: model: AMD FX-8350 bits: 64 type: MT MCP arch: Piledriver level: v2 built: 2012-13
process: GF 32nm family: 0x15 (21) model-id: 2 stepping: 0 microcode: 0x6000852
Topology: cpus: 1x cores: 8 smt: enabled cache: L1: 384 KiB desc: d-8x16 KiB; i-4x64 KiB
L2: 8 MiB desc: 4x2 MiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1402 high: 1405 min/max: 1400/4000 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 1405 2: 1405 3: 1404 4: 1404 5: 1400 6: 1400
7: 1400 8: 1400 bogomips: 64213
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA106 [Geforce RTX 3050] driver: nvidia v: 525.105.17 non-free: 530.xx+
status: current (as of 2023-03) arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-22
pcie: gen: 2 speed: 5 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.0
chip-ID: 10de:2507 class-ID: 0300
Device-2: Cubeternet USB2.0 Camera type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-2:3
chip-ID: 1e4e:0809 class-ID: 0102
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3520x1080 s-dpi: 96 s-size: 931x286mm (36.65x11.26") s-diag: 974mm (38.34")
Monitor-1: DP-2 pos: bottom-r res: 1600x900 hz: 60 dpi: 94 size: 432x240mm (17.01x9.45")
diag: 494mm (19.46") modes: N/A
Monitor-2: HDMI-0 pos: primary,top-left res: 1920x1080 hz: 60 dpi: 94
size: 521x293mm (20.51x11.54") diag: 598mm (23.53") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA GeForce RTX 3050/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: AMD SBx00 Azalia vendor: ASUSTeK M5A78L LE driver: snd_hda_intel bus-ID: 1-2:3
v: kernel bus-ID: 00:14.2 chip-ID: 1e4e:0809 class-ID: 0102 chip-ID: 1002:4383 class-ID: 0403
Device-2: NVIDIA GA106 High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:228e class-ID: 0403
Device-3: Cubeternet USB2.0 Camera type: USB driver: snd-usb-audio,uvcvideo
Device-4: Kingston HyperX 7.1 Audio type: USB driver: hid-generic,snd-usb-audio,usbhid
bus-ID: 6-2:2 chip-ID: 0951:16a4 class-ID: 0300 serial: <filter>
Device-5: JMTek LLC. USB PnP Audio Device type: USB driver: hid-generic,snd-usb-audio,usbhid
bus-ID: 6-3:3 chip-ID: 0c76:161e class-ID: 0300
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK P8 series
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 02:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-1.1:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: peripheral accept
Drives:
Local Storage: total: 3.47 TiB used: 19.87 GiB (0.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST2000DM008-2UB102 size: 1.82 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 0001 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Hitachi model: HTS543232A7A384 size: 298.09 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: A60W scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 870 EVO 500GB size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Western Digital model: WD10EZEX-22MFCA0 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A01 scheme: MBR
Partition:
ID-1: / raw-size: 297.83 GiB size: 292.1 GiB (98.07%) used: 19.87 GiB (6.8%) fs: ext4
dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sdb1 maj-min: 8:17
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 10.66 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 29.1 C mobo: N/A gpu: nvidia temp: 37 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Repos:
Packages: pm: dpkg pkgs: 2199 libs: 1153 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.truenetwork.ru/mxlinux/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/vscodium.list
1: deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium main
Info:
Processes: 258 Uptime: 2m wakeups: 0 Memory: 7.66 GiB used: 1.47 GiB (19.2%) Init: systemd v: 252
target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 8:31 am
by j2mcgreg
@Afireal wrote:
After restarting from Beta 1 UEFI loading takes much longer time and ends with error like "no OS to boot"
This sounds like your computer is hanging when it initially searches the USB bus for a boot source. You should access your bios and adjust the boot devices list so that USB devices are the last option or don't appear at all.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 10:07 am
by operadude
dolphin_oracle wrote: ↑Sun Jun 04, 2023 9:39 pm
@operadude
xfce4-appfinder and vlc mxpi entries should be resolved at next update of mx-packageinstaller-pkglist. thanks for the report.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 1:17 pm
by @ajaxStardust
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash resume=UUID=<filter> resume_offset=89200640
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7 dm: SDDM
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Portable System: Dell product: XPS M1530 v: N/A serial: <superuser required> Chassis:
type: 8 serial: <superuser required>
Mobo: Dell model: 0D501F serial: <superuser required> BIOS: Dell v: A12 date: 11/19/2008
Battery:
ID-1: BAT0 charge: 0% condition: 29.3/86.6 Wh (33.8%) volts: 3.7 min: 11.1
model: Sanyo DELL TK3699 type: Li-ion serial: <filter> status: not charging
CPU:
Info: model: Intel Core2 Duo T8300 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x60F
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1197 min/max: N/A cores: 1: 1197 2: 1197 bogomips: 9576
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA G84M [GeForce 8600M GT] vendor: Dell driver: nouveau v: kernel non-free:
series: 340.xx status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla
process: 40-80nm built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1
empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0407 class-ID: 0300 temp: 91.0 C
Device-2: OmniVision OV2640 Webcam type: USB driver: uvcvideo bus-ID: 3-1:2 chip-ID: 05a9:2640
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: xfwm v: 4.18.0
driver: X: loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0
screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69")
Monitor-1: LVDS-1 model: AU Optronics 0x2077 built: 2008 res: 1440x900 hz: 60 dpi: 111
gamma: 1.2 size: 331x207mm (13.03x8.15") diag: 390mm (15.4") ratio: 16:10 modes: max: 1440x900
min: 640x350
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: NV84 direct-render: Yes
Audio:
Device-1: Intel 82801H HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:284b class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Marvell 88E8040 PCI-E Fast Ethernet vendor: Dell driver: sky2 v: 1.30 pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: ce00 bus-ID: 09:00.0 chip-ID: 11ab:4354 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Broadcom BCM4312 802.11b/g LP-PHY vendor: Dell Wireless 1395 WLAN Mini-Card
driver: wl v: kernel modules: ssb pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 0b:00.0
chip-ID: 14e4:4315 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Dell Wireless 355 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 6-2.1:3
chip-ID: 413c:8126 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 1.2 lmp-v: 2.0
sub-v: 41d8 hci-v: 2.0 rev: 216f
Info: acl-mtu: 1017:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 709.83 GiB used: 96.19 GiB (13.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 type: USB vendor: TeamGroup model: T253512GB size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: <unknown> type: SSD serial: <filter>
scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD2500BEVT-75A23T0 size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 1A01 scheme: MBR
Partition:
ID-1: / raw-size: 475.92 GiB size: 467.37 GiB (98.21%) used: 20.63 GiB (4.4%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 46.6 MiB (4.8%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 5.82 GiB used: 24.5 MiB (0.4%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 81.0 C mobo: N/A gpu: nouveau temp: 92.0 C
Fan Speeds (RPM): cpu: 4600 fan-2: 0 fan-3: 0
Repos:
Packages: pm: dpkg pkgs: 2749 libs: 1425 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/vscode.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info:
Processes: 223 Uptime: 1h 21m wakeups: 51 Memory: 3.82 GiB used: 2.01 GiB (52.7%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Code: Select all
Fetched 2,452 kB in 1s (1,755 kB/s)
(Reading database ... 409062 files and directories currently installed.)
Preparing to unpack .../0-desktop-defaults-mx-xfce-desktop_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../1-desktop-defaults-mx-xfce-system_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../2-desktop-defaults-mx-xfce_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../3-desktop-base_12.0.6_all.deb ...
Unpacking desktop-base (12.0.6) ...
dpkg: error processing archive /tmp/apt-dpkg-install-3w1nYN/3-desktop-base_12.0.6_all.deb (--unpack)
:
trying to overwrite '/etc/xdg/kcm-about-distrorc', which is also in package desktop-defaults-mx-kde
23.05.02mx23
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Preparing to unpack .../4-grsync_1.3.0-2mx23_amd64.deb ...
Unpacking grsync (1.3.0-2mx23) over (1.3.0-1+b1) ...
Selecting previously unselected package libzxcvbn0:amd64.
Preparing to unpack .../5-libzxcvbn0_2.5+dfsg-1_amd64.deb ...
Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...
Preparing to unpack .../6-lo-main-helper_23.07.12mx23_all.deb ...
Unpacking lo-main-helper (23.07.12mx23) over (23.07.11mx23) ...
Preparing to unpack .../7-mx-installer_23.6.01mx23_amd64.deb ...
Unpacking mx-installer (23.6.01mx23) over (23.6mx23) ...
Preparing to unpack .../8-mx-packageinstaller-pkglist_23.07.12mx23_all.deb ...
Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...
Preparing to unpack .../9-mx-tweak_23.06.01mx23_amd64.deb ...
Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...
Errors were encountered while processing:
/tmp/apt-dpkg-install-3w1nYN/3-desktop-base_12.0.6_all.deb
Please wait, creating menu file - stored in /home/flux/.fluxbox/submenus/full_menu ...
Menu file created and ready to be used
E: Sub-process /usr/bin/dpkg returned an error code (1)
flux@mxflux:~
$
best wishes!
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 2:00 pm
by @ajaxStardust
dpkg --configure -a
and realized several pgks had not been installed (presumably as a result of being part of my having selected probably several desktop environment components and stuff like GIMP, inkscape, etc.) after that completed, I restarted (don't know that affects Linux, but wth)
Code: Select all
flux@mxflux:~
$ sudo apt --fix-broken install
[sudo] password for flux:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Correcting dependencies... Done
The following additional packages will be installed:
desktop-base
The following NEW packages will be installed:
desktop-base
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 0 B/7,864 kB of archives.
After this operation, 20.1 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
(Reading database ... 409066 files and directories currently installed.)
Preparing to unpack .../desktop-base_12.0.6_all.deb ...
Unpacking desktop-base (12.0.6) ...
dpkg: error processing archive /var/cache/apt/archives/desktop-base_12.0.6_all.deb (--unpack):
trying to overwrite '/etc/xdg/kcm-about-distrorc', which is also in package desktop-defaults-mx-kde 23.05.02mx23
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
/var/cache/apt/archives/desktop-base_12.0.6_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
flux@mxflux:~
$
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 3:29 pm
by duane
Hmm. Is Sourceforge overwhelmed right now?
I am just seeing a logo no download of beta 1
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 3:34 pm
by dolphin_oracle
@ajaxStardust wrote: ↑Mon Jun 05, 2023 1:17 pm
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash resume=UUID=<filter> resume_offset=89200640
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7 dm: SDDM
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Portable System: Dell product: XPS M1530 v: N/A serial: <superuser required> Chassis:
type: 8 serial: <superuser required>
Mobo: Dell model: 0D501F serial: <superuser required> BIOS: Dell v: A12 date: 11/19/2008
Battery:
ID-1: BAT0 charge: 0% condition: 29.3/86.6 Wh (33.8%) volts: 3.7 min: 11.1
model: Sanyo DELL TK3699 type: Li-ion serial: <filter> status: not charging
CPU:
Info: model: Intel Core2 Duo T8300 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x60F
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
L2: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1197 min/max: N/A cores: 1: 1197 2: 1197 bogomips: 9576
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA G84M [GeForce 8600M GT] vendor: Dell driver: nouveau v: kernel non-free:
series: 340.xx status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla
process: 40-80nm built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1
empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0407 class-ID: 0300 temp: 91.0 C
Device-2: OmniVision OV2640 Webcam type: USB driver: uvcvideo bus-ID: 3-1:2 chip-ID: 05a9:2640
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: xfwm v: 4.18.0
driver: X: loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0
screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69")
Monitor-1: LVDS-1 model: AU Optronics 0x2077 built: 2008 res: 1440x900 hz: 60 dpi: 111
gamma: 1.2 size: 331x207mm (13.03x8.15") diag: 390mm (15.4") ratio: 16:10 modes: max: 1440x900
min: 640x350
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: NV84 direct-render: Yes
Audio:
Device-1: Intel 82801H HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:284b class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Marvell 88E8040 PCI-E Fast Ethernet vendor: Dell driver: sky2 v: 1.30 pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: ce00 bus-ID: 09:00.0 chip-ID: 11ab:4354 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Broadcom BCM4312 802.11b/g LP-PHY vendor: Dell Wireless 1395 WLAN Mini-Card
driver: wl v: kernel modules: ssb pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 0b:00.0
chip-ID: 14e4:4315 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Dell Wireless 355 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 6-2.1:3
chip-ID: 413c:8126 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 1.2 lmp-v: 2.0
sub-v: 41d8 hci-v: 2.0 rev: 216f
Info: acl-mtu: 1017:8 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 709.83 GiB used: 96.19 GiB (13.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 type: USB vendor: TeamGroup model: T253512GB size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: <unknown> type: SSD serial: <filter>
scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD2500BEVT-75A23T0 size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 1A01 scheme: MBR
Partition:
ID-1: / raw-size: 475.92 GiB size: 467.37 GiB (98.21%) used: 20.63 GiB (4.4%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 46.6 MiB (4.8%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 5.82 GiB used: 24.5 MiB (0.4%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 81.0 C mobo: N/A gpu: nouveau temp: 92.0 C
Fan Speeds (RPM): cpu: 4600 fan-2: 0 fan-3: 0
Repos:
Packages: pm: dpkg pkgs: 2749 libs: 1425 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/vscode.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info:
Processes: 223 Uptime: 1h 21m wakeups: 51 Memory: 3.82 GiB used: 2.01 GiB (52.7%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Code: Select all
Fetched 2,452 kB in 1s (1,755 kB/s)
(Reading database ... 409062 files and directories currently installed.)
Preparing to unpack .../0-desktop-defaults-mx-xfce-desktop_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../1-desktop-defaults-mx-xfce-system_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../2-desktop-defaults-mx-xfce_23.06.01mx23_all.deb ...
Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...
Preparing to unpack .../3-desktop-base_12.0.6_all.deb ...
Unpacking desktop-base (12.0.6) ...
dpkg: error processing archive /tmp/apt-dpkg-install-3w1nYN/3-desktop-base_12.0.6_all.deb (--unpack)
:
trying to overwrite '/etc/xdg/kcm-about-distrorc', which is also in package desktop-defaults-mx-kde
23.05.02mx23
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Preparing to unpack .../4-grsync_1.3.0-2mx23_amd64.deb ...
Unpacking grsync (1.3.0-2mx23) over (1.3.0-1+b1) ...
Selecting previously unselected package libzxcvbn0:amd64.
Preparing to unpack .../5-libzxcvbn0_2.5+dfsg-1_amd64.deb ...
Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...
Preparing to unpack .../6-lo-main-helper_23.07.12mx23_all.deb ...
Unpacking lo-main-helper (23.07.12mx23) over (23.07.11mx23) ...
Preparing to unpack .../7-mx-installer_23.6.01mx23_amd64.deb ...
Unpacking mx-installer (23.6.01mx23) over (23.6mx23) ...
Preparing to unpack .../8-mx-packageinstaller-pkglist_23.07.12mx23_all.deb ...
Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...
Preparing to unpack .../9-mx-tweak_23.06.01mx23_amd64.deb ...
Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...
Errors were encountered while processing:
/tmp/apt-dpkg-install-3w1nYN/3-desktop-base_12.0.6_all.deb
Please wait, creating menu file - stored in /home/flux/.fluxbox/submenus/full_menu ...
Menu file created and ready to be used
E: Sub-process /usr/bin/dpkg returned an error code (1)
flux@mxflux:~
$
best wishes!
I'll have to fix a package thanks.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 4:56 pm
by Jerry3904
duane wrote: ↑Mon Jun 05, 2023 3:29 pm
Hmm. Is Sourceforge overwhelmed right now?
I am just seeing a logo no download of beta 1
I used it a little while ago without problem, but maybe it's now just temporarily busy. Usual advice: just wait a bit...
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 05, 2023 6:40 pm
by duane
Thanks Jerry
That was strange. On my other computer it comes right up.
Now that I have the .iso I am not worrying about Sourceforge.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 2:57 am
by @ajaxStardust
dolphin_oracle wrote: ↑Mon Jun 05, 2023 3:34 pm
I'll have to fix a package thanks.
dang it. i meant to get back on here before i went to sleep. i can't think at the moment but i removed something and ... long story short, managed to get it all worked out without incident. shuffled a couple of things and no sweat. i was having connectivity issues (Wi-Fi) around the time that i first installed this system, and i forget but somewhere along the line i got that hiccup but all good now. when i get on the laptop, i'll reply to advise what pkg i removed.
Best wishes!
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 5:41 am
by i_ri
hello dolphin_oracle
it began idesktool: iconcheck="$(echo "${icon}" | grep -i "\.png")"
idesktool function iconvalidate() got thrown under the bus,
put our svg foot in the door with hack to include: iconcheck="$(echo "${icon}")"
has no image check for Type; and a blank field, no icon, is accepted.
This sample trials to, in mx-idesktoolinclude,
Get iconvalidate function, around line 555, iconvalidate,
try if validate again is working within the svg,png,xpm Types? Patterns match --file-filter=.
Please trial replace iconcheck="$(echo "${icon}")" with this:
mx-idesktool back in business with iconvalidate?
Code: Select all
iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
before
if [ "${iconcheck}" = "$icon" ]; then
writefile
else
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 5:51 am
by Jerry3904
i_ri wrote: ↑Tue Jun 06, 2023 5:41 am
hello dolphin_oracle
it began idesktool: iconcheck="$(echo "${icon}" | grep -i "\.png")"
idesktool function iconvalidate() got thrown under the bus,
put our svg foot in the door with hack to include: iconcheck="$(echo "${icon}")"
has no image check for Type; and a blank field, no icon, is accepted.
This sample trials to, in mx-idesktoolinclude,
Get iconvalidate function, around line 555, iconvalidate,
try if validate again is working within the svg,png,xpm Types? Patterns match --file-filter=.
Please trial replace iconcheck="$(echo "${icon}")" with this:
mx-idesktool back in business with iconvalidate?
Code: Select all
iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
before
if [ "${iconcheck}" = "$icon" ]; then
writefile
else
Thanks, I'll look.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 6:13 am
by Jerry3904
It appears that I made a mistake about the version to package. See if the updated one attached works better--it was good on b1 testing for me.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 6:20 am
by fehlix
kobaian wrote: ↑Mon Jun 05, 2023 3:53 am
For the second time while updating my MX-Fluxbox 23 Beta, Nala freezes on 98% with "opening dpkg".
kobaian wrote: ↑Mon Jun 05, 2023 6:53 am
Today's update:
Code: Select all
$ apt-history
...
2023-06-05 07:29:34 upgrade tzdata:all 2023c-4 2023c-5
dolphin_oracle wrote: ↑Mon Jun 05, 2023 6:50 am
I noticed that in some cases it looks like the nala display just doesn't update. at one point the update was actually finished and nala didn't report as such. hitting enter closed the updater window. I've seen this when the update process files the entire terminal window, but not every time.
the update of ntpsec takes an epic amount of time.
The issue seems to be related to ntpsec - not to nala.
When starting here in VM,
ntpd is running, but with either an empty /run/ntpd.pid or with a pid which does not exists.
Now when tzdata get upgraded, it triggers a restart of ntpsec -service to restart ntpd,
by fist stopping the daemon with
which appears to be successfully finished.
But due to the wrong or missing pid in /run/ntpd.pid
ntpd is still running, which can be manually checked after reboot with:
Code: Select all
sudo service ntpsec stop
Stopping NTP server: ntpd.
sudo service ntpsec status
NTP server is running.
tzdata upgrade triggers a restart and hangs b/c it cannot start the already running ntpd.
It hangs exactly 3 minutes to establish a flock with flock -w 180 , due to this start clause,
in /etc/init.d/ntpsec:
Code: Select all
start)
log_daemon_msg "Starting NTP server" "ntpd"
(
flock -w 180 9
# shellcheck disable=SC2086
start-stop-daemon --start --quiet --oknodo --pidfile $PIDFILE --startas $DAEMON -- -p $PIDFILE $NTPD_OPTS
) 9>$LOCKFILE
log_end_msg $?
;;
The hanger can be checked with either apt or nala:
nala-hangs-on-tzdata-ntpsec.jpg
apt-hangs-on-tzdata-ntpsec.jpg
Seems related to network if-up:
Code: Select all
ps aux | grep ntpd
root 2057 0.0 0.0 2576 108 ? S 11:00 0:00 /bin/sh /etc/network/if-up.d/ntpsec-ntpdate
ntpsec 2101 0.1 0.0 84572 18932 ? SLs 11:00 0:00 /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 6:33 am
by OlafD
xfce 64bit
Hi,
now I have the problem for the second time:
I start virt-manager (previously I added myself to the group "libvirt" and started libvirtd), start MX21xfce live-iso, start the installation. The VM stops at 15%, I could just give the computer name. The mouse moved only stuttering, but slower than slow motion. Keyboard input was no longer accepted. I could not close any windows either. Ctrl+Alt+Del did not help either.
I had to turn off the laptop without shutting down.
After rebooting the laptop and logging in as user, I got a popup that wanted the password for root to run xkill. I didn't give this password during the installation and so it doesn't work. As user I can not run sudo: I get the message that I am not in the sudoers file.
Before the crash, my user password worked fine.
I can't explain it to myself.
What can I provide you (besides QSI) so that you can possibly find something with your trained eyes and knowledge.
As I said, it happened for the second time now.
Thank you very much in advance.
Translated with
www.DeepL.com/Translator (free version)
Code: Select all
Snapshot created on: 20230604_1254
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro rootflags=subvol=@ quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23 beta 1_x64 Libretto Juni 04 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 54.0 Wh (98.9%) condition: 54.6/71.5 Wh (76.3%) volts: 12.9 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: charging cycles: 998
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1200 min/max: 800/3100 scaling: driver: intel_cpufreq governor: ondemand
cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 20801
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: DP-2 off: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-2 model: Dell U2717D serial: <filter> built: 2019 res: 2560x1440 hz: 60 dpi: 109
gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440
min: 720x400
Monitor-2: eDP-1 note: disabled pos: primary model: Apple Color LCD built: 2013 res: 2560x1440
dpi: 227 gamma: 1.2 size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10
modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:9
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 113 GiB used: 17.56 GiB (15.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
Partition:
ID-1: / raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 562 KiB (0.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 66.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2109 libs: 1071 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 246 Uptime: 1h 31m wakeups: 3 Memory: 7.67 GiB used: 4.11 GiB (53.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 6:36 am
by i_ri
mx-idesktool _jb
line 510 --text="$TEXT19": \
line 511 --file-selection="${iconplaceholder}" \
line 555 iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 06, 2023 6:43 am
by Jerry3904
i_ri wrote: ↑Tue Jun 06, 2023 6:36 am
mx-idesktool _jb
line 510 --text="$TEXT19": \
line 511 --file-selection="${iconplaceholder}" \
line 555 iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
I'm out working today so will try to figure out what you mean later.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 1:34 am
by OlafD
OlafD wrote: ↑Tue Jun 06, 2023 6:33 am
xfce 64bit
Hi,
now I have the problem for the second time:
I start virt-manager (previously I added myself to the group "libvirt" and started libvirtd), start MX21xfce live-iso, start the installation. The VM stops at 15%, I could just give the computer name. The mouse moved only stuttering, but slower than slow motion. Keyboard input was no longer accepted. I could not close any windows either. Ctrl+Alt+Del did not help either.
I had to turn off the laptop without shutting down.
After rebooting the laptop and logging in as user, I got a popup that wanted the password for root to run xkill. I didn't give this password during the installation and so it doesn't work. As user I can not run sudo: I get the message that I am not in the sudoers file.
Before the crash, my user password worked fine.
I can't explain it to myself.
What can I provide you (besides QSI) so that you can possibly find something with your trained eyes and knowledge.
As I said, it happened for the second time now.
Thank you very much in advance.
Translated with
www.DeepL.com/Translator (free version)
Code: Select all
Snapshot created on: 20230604_1254
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro rootflags=subvol=@ quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23 beta 1_x64 Libretto Juni 04 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 54.0 Wh (98.9%) condition: 54.6/71.5 Wh (76.3%) volts: 12.9 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: charging cycles: 998
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1200 min/max: 800/3100 scaling: driver: intel_cpufreq governor: ondemand
cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 20801
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: DP-2 off: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-2 model: Dell U2717D serial: <filter> built: 2019 res: 2560x1440 hz: 60 dpi: 109
gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440
min: 720x400
Monitor-2: eDP-1 note: disabled pos: primary model: Apple Color LCD built: 2013 res: 2560x1440
dpi: 227 gamma: 1.2 size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10
modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:9
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 113 GiB used: 17.56 GiB (15.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
Partition:
ID-1: / raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 562 KiB (0.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 66.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2109 libs: 1071 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 246 Uptime: 1h 31m wakeups: 3 Memory: 7.67 GiB used: 4.11 GiB (53.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Edit 1: The brightness buttons for the screen on the keyboard no longer work either. I do get the popup for the brightness control, but nothing is changed. I have to use the brightness systray.
Edit 2: I think it has something to do with btrfs. I had such a problem also once under Spiral Linux and VirtualBox.
My technical understanding is very minimal, but if I imagine that a VM wants to create an ext4 filesystem on a btrfs host system that it will cause problems there.
Would be nice if I could get some "enlightenment" from you guys ;-)
My plan is to start a fresh install with ext4.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 2:32 am
by @ajaxStardust
@ajaxStardust wrote: ↑Tue Jun 06, 2023 2:57 am
dolphin_oracle wrote: ↑Mon Jun 05, 2023 3:34 pm
I'll have to fix a package thanks.
i removed something and ... long story short, managed to get it all worked out
the pkg removed was
gnome-control-center
I have also sucessfully reinstalled gnome-control-center . i did so after an update today (to mx-pkginsaller i believe)
thank you!!
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 3:08 am
by jasalt
KDE Connect has similar problems as SAMBA with default firewall settings as noted in earlier comment
viewtopic.php?p=726569#p726569.
While it's probably a nice thing to have firewall on by default, maybe there could be a more verbose info about the possible side effects with regularly used services in release docs? This way it might not come as a surprise for many who are used to having firewall off by default. And while it probably would be an overkill solution, maybe even open ports by default if user installs Samba, KDE Connect etc?
In my case after couple tries failing to connect a device with KDE Connect I figured this out while skimming through it's FAQ pointing to add following ufw rules:
Code: Select all
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
Good job with the release! Seems promising so far as some deal breaking problems with KDE Desktop version have been ironed out since MX21 / Bullseye.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 3:13 am
by operadude
Very minor issue, but first, my QSI (running from Live USB, with: persist_root, & toram):
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash persist_root toram
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, plank wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 800 min/max: 800/3900 scaling: driver: intel_pstate governor: powersave
cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 41.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.75 TiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 31.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-5: /dev/sdd maj-min: 8:48 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
ID-8: /dev/sdg maj-min: 8:96 type: USB model: Mass Storage Device size: 29.49 GiB block-size:
physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 37.0 C mobo: N/A gpu: radeon temp: 41.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2410 libs: 1229 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 236 Uptime: 24m wakeups: 3 Memory: 31.3 GiB used: 8.49 GiB (27.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Clementine (installed from MXPI):
From Plank, pressing the Icon, opens Clementine on the Panel (Left) ONLY.
So, to get the GUI, I need to press on the Icon in the Panel.
All my other Icons in Plank open the GUI application, but not for Clementine:
Here, you can see that there is NO DOT under the Clementine Plank Icon:
clementine_no_dot_in_plank.png
But, on the Panel, you can see that Clementine is activated:
clementine_in_panel.png
I know, a VERY minor issue, since when I click-on the icon in the panel, the Clementine GUI opens.
However, I do not have this issue in MX-21.3 (Xfce & KDE).
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 3:49 am
by i_ri
hello dolphin_oracle Jerry3904
mx-idesktool
Check for running instance is present.
Can? What is the failure factor? of sample
ADD Bring to Focus idesktool running instance
?. with wmctrl -R (?) is it okay?
line 93
Code: Select all
## Ensure only one instance of this script is running
me="$(basename "$0")";
running=$(ps h -C "${me}" | grep -wv $$ | wc -l);
[[ $running > 1 ]] && wmctrl -R "${TEXT5}" && exit;
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 4:53 am
by operadude
Same issue with Clementine on MX-23, KDE, Beta-1.
See my previous post for this issue with Clementine on MX-23, Xfce, Beta-1:
Code: Select all
https://forum.mxlinux.org/viewtopic.php?p=728006#p728006
Here's my QSI for KDE, Beta-1:
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash persist_root toram
Desktop: KDE Plasma v: 5.27.5 info: plank wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-23_KDE_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Gigabyte product: H270-HD3 v: N/A serial: <superuser required>
Mobo: Gigabyte model: H270-HD3-CF v: x.x serial: <superuser required> UEFI: American Megatrends
v: F5 date: 04/24/2017
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse PID:0080 serial: N/A
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i3-7100 bits: 64 type: MT MCP arch: Kaby Lake gen: core 7 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
microcode: 0x42
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 800 min/max: 800/3900 scaling: driver: intel_pstate governor: powersave
cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 31199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT
vulnerable
Type: retbleed status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Oland PRO [Radeon R7 240/340 / Radeon 520] vendor: Micro-Star MSI driver: radeon
v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
pcie: gen: 3 speed: 8 GT/s lanes: 8 ports: active: HDMI-A-1 empty: DVI-D-1,VGA-1
bus-ID: 01:00.0 chip-ID: 1002:6613 class-ID: 0300 temp: 41.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: radeon
unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-0 model: Samsung built: 2007 res: 1920x1080 hz: 60 dpi: 305
gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: max: 1920x1080
min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: OLAND ( LLVM 15.0.6 DRM 2.50 6.1.0-9-amd64)
direct-render: Yes
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: Gigabyte driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 7.74 TiB used: 20.37 GiB (0.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 1B2QEXE7 temp: 31.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 model: SATA SSD size: 111.79 GiB block-size: physical: 512 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.3 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61K1 scheme: MBR
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST3000DM001-1ER166 size: 2.73 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: CC25 scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
scheme: GPT
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital model: WD5000AADS-00S9B0 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 0A01
scheme: GPT
ID-7: /dev/sdf maj-min: 8:80 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 4096 B type: N/A serial: <filter> rev: 0739 scheme: MBR
ID-8: /dev/sdi maj-min: 8:128 type: USB vendor: Generic model: STORAGE DEVICE size: 14.84 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1203 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A gpu: radeon temp: 41.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2521 libs: 1377 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
2: deb http://mxrepo.com/mx/repo/ bookworm ahs
Info:
Processes: 226 Uptime: 24m wakeups: 3 Memory: 31.3 GiB used: 8.41 GiB (26.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Clementine not opening in Plank (no dot under icon):
clementine_no_dot.png
Clementine in panel:
clementine_in_panel.png
So, again, VERY minor issue, as I can open the Clementine GUI from the panel icon.
It would just be nice that it opens from Plank, as it does properly in MX21.3
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 5:45 am
by operadude
SOLVED THE CLEMENTINE ISSUE!
The problem is that when Plank tries to open Clementine (from the Plank icon), it uses the Clementine default behavior.
Since Plank is trying to open Clementine for the first time, it will use the default preference, which is: "When Clementine starts" - > "Remember from last time". However, opening the first time in Plank, there is no "last time", so the GUI does NOT open. Here it is in pictures:
clementine_preferences.png
Simply change the default behavior of "when Clementine starts" to: "Always show the main window":
clementine_preferences_updated.png
Done!
The "Proof":
clementine_opening_in_plank.png
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 7:48 am
by Jerry3904
MXFB user-devs: any objection to going with this as default in MX-23's overlay file? (Trying to tie up any loose ends for B2/RC.)
Code: Select all
# force slit to un-autohide (left and top sides) on MX-23
slit.borderWidth: 0
slit.bevelWidth: 2
I'll take silence as = no objection
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 8:09 am
by dolphin_oracle
OlafD wrote: ↑Wed Jun 07, 2023 1:34 am
OlafD wrote: ↑Tue Jun 06, 2023 6:33 am
xfce 64bit
Hi,
now I have the problem for the second time:
I start virt-manager (previously I added myself to the group "libvirt" and started libvirtd), start MX21xfce live-iso, start the installation. The VM stops at 15%, I could just give the computer name. The mouse moved only stuttering, but slower than slow motion. Keyboard input was no longer accepted. I could not close any windows either. Ctrl+Alt+Del did not help either.
I had to turn off the laptop without shutting down.
After rebooting the laptop and logging in as user, I got a popup that wanted the password for root to run xkill. I didn't give this password during the installation and so it doesn't work. As user I can not run sudo: I get the message that I am not in the sudoers file.
Before the crash, my user password worked fine.
I can't explain it to myself.
What can I provide you (besides QSI) so that you can possibly find something with your trained eyes and knowledge.
As I said, it happened for the second time now.
Thank you very much in advance.
Translated with
www.DeepL.com/Translator (free version)
Code: Select all
Snapshot created on: 20230604_1254
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro rootflags=subvol=@ quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23 beta 1_x64 Libretto Juni 04 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 54.0 Wh (98.9%) condition: 54.6/71.5 Wh (76.3%) volts: 12.9 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: charging cycles: 998
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1200 min/max: 800/3100 scaling: driver: intel_cpufreq governor: ondemand
cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 20801
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: DP-2 off: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-2 model: Dell U2717D serial: <filter> built: 2019 res: 2560x1440 hz: 60 dpi: 109
gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440
min: 720x400
Monitor-2: eDP-1 note: disabled pos: primary model: Apple Color LCD built: 2013 res: 2560x1440
dpi: 227 gamma: 1.2 size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10
modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:9
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 113 GiB used: 17.56 GiB (15.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
Partition:
ID-1: / raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 562 KiB (0.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 66.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2109 libs: 1071 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 246 Uptime: 1h 31m wakeups: 3 Memory: 7.67 GiB used: 4.11 GiB (53.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Edit 1: The brightness buttons for the screen on the keyboard no longer work either. I do get the popup for the brightness control, but nothing is changed. I have to use the brightness systray.
Edit 2: I think it has something to do with btrfs. I had such a problem also once under Spiral Linux and VirtualBox.
My technical understanding is very minimal, but if I imagine that a VM wants to create an ext4 filesystem on a btrfs host system that it will cause problems there.
Would be nice if I could get some "enlightenment" from you guys ;-)
My plan is to start a fresh install with ext4.
I have no experience with libvirt and virt manager, but I can't imagine the creation of a file with an ext4 file system inside, would matter. but obviously there were major issues if the installation on the virtual machine messed up your real machine. that should never happen.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 8:12 am
by dolphin_oracle
i_ri wrote: ↑Wed Jun 07, 2023 3:49 am
hello dolphin_oracle Jerry3904
mx-idesktool
Check for running instance is present.
Can? What is the failure factor? of sample
ADD Bring to Focus idesktool running instance
?. with wmctrl -R (?) is it okay?
line 93
Code: Select all
## Ensure only one instance of this script is running
me="$(basename "$0")";
running=$(ps h -C "${me}" | grep -wv $$ | wc -l);
[[ $running > 1 ]] && wmctrl -R "${TEXT5}" && exit;
failure might be editing the same file in more than one instance.
bring app into focus might be a good idea, but its a yad script and the window changes. I think we will keep the safeguard as-is, thanks for the suggestion.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 8:21 am
by dolphin_oracle
Jerry3904 wrote: ↑Tue Jun 06, 2023 6:43 am
i_ri wrote: ↑Tue Jun 06, 2023 6:36 am
mx-idesktool _jb
line 510 --text="$TEXT19": \
line 511 --file-selection="${iconplaceholder}" \
line 555 iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
I'm out working today so will try to figure out what you mean later.
this is referring to validating the type of icon chosen. I think the way its currently written in mx-idesktool its always true.
however the suggested change is also incomplete.
@Jerry3904 I incorporated the changes. Will package tonight.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 8:28 am
by ibm450
error.png
Unable to update the following.
Also, Why is mx kde file picker is not choosing kde file picker
. 
Screenshot_20230607_202902.png
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 9:01 am
by Jerry3904
dolphin_oracle wrote: ↑Wed Jun 07, 2023 8:21 am
Jerry3904 wrote: ↑Tue Jun 06, 2023 6:43 am
i_ri wrote: ↑Tue Jun 06, 2023 6:36 am
mx-idesktool _jb
line 510 --text="$TEXT19": \
line 511 --file-selection="${iconplaceholder}" \
line 555 iconcheck="$(echo "${icon}"|gawk '/\.svg|\.png|\.PNG|\.xpm/')"
echo $iconcheck
I'm out working today so will try to figure out what you mean later.
this is referring to validating the type of icon chosen. I think the way its currently written in mx-idesktool its always true.
however the suggested change is also incomplete.
@Jerry3904 I incorporated the changes. Will package tonight.
Ok, was about to upload...
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 9:36 am
by Melber
Jerry3904 wrote: ↑Wed Jun 07, 2023 7:48 am
MXFB user-devs: any objection to going with this as default in MX-23's overlay file? (Trying to tie up any loose ends for B2/RC.)
Code: Select all
# force slit to un-autohide (left and top sides) on MX-23
slit.borderWidth: 0
slit.bevelWidth: 2
I'll take silence as = no objection
Any reason why not
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 0
to avoid ugly bevel?
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 10:01 am
by Jerry3904
Melber wrote: ↑Wed Jun 07, 2023 9:36 am
Jerry3904 wrote: ↑Wed Jun 07, 2023 7:48 am
MXFB user-devs: any objection to going with this as default in MX-23's overlay file? (Trying to tie up any loose ends for B2/RC.)
Code: Select all
# force slit to un-autohide (left and top sides) on MX-23
slit.borderWidth: 0
slit.bevelWidth: 2
I'll take silence as = no objection
Any reason why not
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 0
to avoid ugly bevel?
That variant produced no change in behavior in my test with an installed b1 (reported above somewhere), but I will test again to be sure. Thanks.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 11:36 am
by dolphin_oracle
ibm450 wrote: ↑Wed Jun 07, 2023 8:28 am
error.png
Unable to update the following.
Also, Why is mx kde file picker is not choosing kde file picker
.
Screenshot_20230607_202902.png
what iso did you start from? we do not have a recent update for libnns-systemd.
showing quick-system-info as well as
would be good.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 12:01 pm
by siamhie
Melber wrote: ↑Wed Jun 07, 2023 9:36 am
Jerry3904 wrote: ↑Wed Jun 07, 2023 7:48 am
MXFB user-devs: any objection to going with this as default in MX-23's overlay file? (Trying to tie up any loose ends for B2/RC.)
Code: Select all
# force slit to un-autohide (left and top sides) on MX-23
slit.borderWidth: 0
slit.bevelWidth: 2
I'll take silence as = no objection
Any reason why not
Code: Select all
slit.borderWidth: 0
slit.bevelWidth: 0
to avoid ugly bevel?
@Jerry3904 @Melber After further testing (logging out and in) I found that if I set any variable to slit.borderWidth other than 0, I cannot get the dock to show when auto-hidden.
Setting any variable to slit.bevelWidth other than 0 creates a black line (thickness dependent on the value) around the dock.
I think setting both variables to 0 work right.
I have a proposal to add to the overlay file. Tell me what you think?
I've noticed some styles have menu.bevelWidth: 1 set in their conf file which results in this look with more than 35 entries in a sub category.
but if you set menu.bevelWidth: 2 (in overlay) all styles now have two columns.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 12:21 pm
by Jerry3904
Thanks for that suggestion. I'm unwilling to test/adopt it until the next round of testing--right now all focus is on clean-up.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 12:29 pm
by siamhie
Jerry3904 wrote: ↑Wed Jun 07, 2023 12:21 pm
Thanks for that suggestion. I'm unwilling to test/adopt it until the next round of testing--right now all focus is on clean-up.
@Jerry3904 Sounds good. I'll resubmit during b2/rc1 testing.
p.s. Love the inclusion of cursors this time around in MX Tweak.
mx-tweak.png
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 12:39 pm
by Jerry3904
DO is simply amazing. Not only is that included, but the UI is really well done.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 12:59 pm
by siamhie
Jerry3904 wrote: ↑Wed Jun 07, 2023 12:39 pm
DO is simply amazing. Not only is that included, but the UI is really well done.
Absolutely. Taking fluxbox to new levels of personal customization.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 1:32 pm
by qback
Hello Guys,
I just want to make a post to praise developers of MX Linux. I use Linux now for 4 years excursively and I have been using as a daily Ubuntu, Fedora and Arch with Plasma DE and MX Linux 23 Beta 1 is working the best of all of them. In all of them something in KDE was not working correctly but not in MX and it is damn beta. And I am using it in Wayland.
Great work!
Here are some things that i found
1. Battery life is little bit worse than on ununtu with tlp.
2. While installing Flatpaks in MX installer there are question marks everywhere(photo)
3. "Application view is unsupported on your system" message in system monitor.(photo)
Have great day Guys.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 07, 2023 5:09 pm
by Adrian
While installing Flatpaks in MX installer there are question marks everywhere
That's what happens on all versions even in MX21, it's an encoding issue the terminal prints a block character that is not interpreted well by the widget in MX Packageinstaller, frankly I didn't think it was worth spending time trying to figure that out it's just an esthetic bug that affects only flatpaks installation and I don't think I care too much either about flatpaks or this particular issue, but if I find some time I will investigate.
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 1:54 am
by user-green
Hello, all
In ja_JP locale, garbling appears on the screen as below:
It might be a minor bug, but I hope it will be settled in the future release.
Best regards
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 7:23 am
by ibm450
dolphin_oracle wrote: ↑Wed Jun 07, 2023 11:36 am
ibm450 wrote: ↑Wed Jun 07, 2023 8:28 am
error.png
Unable to update the following.
Also, Why is mx kde file picker is not choosing kde file picker
.
Screenshot_20230607_202902.png
what iso did you start from? we do not have a recent update for libnns-systemd.
showing quick-system-info as well as
would be good.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
resume=UUID=<filter> resume_offset=858112
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Hewlett-Packard product: HP EliteDesk 800 G1 SFF v: N/A
serial: <superuser required> Chassis: type: 4 serial: <superuser required>
Mobo: Hewlett-Packard model: 1998 serial: <superuser required> UEFI: Hewlett-Packard
v: L01 v02.59 date: 03/16/2015
CPU:
Info: model: Intel Core i7-4770 bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
microcode: 0x28
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 3798 high: 3866 min/max: 800/3900 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 3775 2: 3785 3: 3832 4: 3787 5: 3720 6: 3858 7: 3866 8: 3766
bogomips: 54279
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP108 [GeForce GT 1030] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: 530.xx+ status: current (as of 2023-03) arch: Pascal code: GP10x process: TSMC 16nm
built: 2016-21 pcie: gen: 3 speed: 8 GT/s lanes: 4 bus-ID: 01:00.0 chip-ID: 10de:1d01
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.40x13.50")
s-diag: 1252mm (49.29")
Monitor-1: DVI-D-0 pos: right res: 1920x1080 dpi: 82 size: 598x336mm (23.54x13.23")
diag: 686mm (27.01") modes: N/A
Monitor-2: HDMI-0 pos: primary,left res: 1920x1080 dpi: 82 size: 598x336mm (23.54x13.23")
diag: 686mm (27.01") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA GeForce GT 1030/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: Hewlett-Packard EliteDesk 800
G1 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
Device-2: NVIDIA GP108 High Definition Audio vendor: ZOTAC driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 4 bus-ID: 01:00.1 chip-ID: 10de:0fb8 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I217-LM vendor: Hewlett-Packard EliteDesk 800 G1 driver: e1000e
v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: ASUSTek USB-N53 802.11abgn Network Adapter [Ralink RT3572] type: USB
driver: rt2800usb bus-ID: 1-1:2 chip-ID: 0b05:179d class-ID: 0000 serial: <filter>
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-2:3 chip-ID: 0bda:8771
class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 8a6b hci-v: 5.1 rev: 9a9
Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 298.09 GiB used: 43.15 GiB (14.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320413AS size: 298.09 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: JC49
scheme: GPT
Partition:
ID-1: / raw-size: 142.96 GiB size: 139.66 GiB (97.69%) used: 42.2 GiB (30.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.9 MiB (18.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 71.1 GiB size: 68.94 GiB (96.95%) used: 925.1 MiB (1.3%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 32.35 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 46.0 C mobo: N/A gpu: nvidia temp: 36 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 86%
Repos:
Packages: pm: dpkg pkgs: 2603 libs: 1469 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://mirror.aarnet.edu.au/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.datamossa.io/mxlinux/mx/repo/ bookworm main non-free
2: deb http://mirror.datamossa.io/mxlinux/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb https://apt.syncthing.net/ syncthing stable
Info:
Processes: 263 Uptime: 10m wakeups: 1 Memory: 27.35 GiB used: 2.94 GiB (10.7%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 7:26 am
by ibm450
Screenshot_20230607_202902.png
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
resume=UUID=<filter> resume_offset=858112
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta1_x64 Libretto
May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Hewlett-Packard product: HP EliteDesk 800 G1 SFF v: N/A
serial: <superuser required> Chassis: type: 4 serial: <superuser required>
Mobo: Hewlett-Packard model: 1998 serial: <superuser required> UEFI: Hewlett-Packard
v: L01 v02.59 date: 03/16/2015
CPU:
Info: model: Intel Core i7-4770 bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
microcode: 0x28
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 3798 high: 3866 min/max: 800/3900 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 3775 2: 3785 3: 3832 4: 3787 5: 3720 6: 3858 7: 3866 8: 3766
bogomips: 54279
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP108 [GeForce GT 1030] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: 530.xx+ status: current (as of 2023-03) arch: Pascal code: GP10x process: TSMC 16nm
built: 2016-21 pcie: gen: 3 speed: 8 GT/s lanes: 4 bus-ID: 01:00.0 chip-ID: 10de:1d01
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.40x13.50")
s-diag: 1252mm (49.29")
Monitor-1: DVI-D-0 pos: right res: 1920x1080 dpi: 82 size: 598x336mm (23.54x13.23")
diag: 686mm (27.01") modes: N/A
Monitor-2: HDMI-0 pos: primary,left res: 1920x1080 dpi: 82 size: 598x336mm (23.54x13.23")
diag: 686mm (27.01") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA GeForce GT 1030/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: Hewlett-Packard EliteDesk 800
G1 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
Device-2: NVIDIA GP108 High Definition Audio vendor: ZOTAC driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 4 bus-ID: 01:00.1 chip-ID: 10de:0fb8 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I217-LM vendor: Hewlett-Packard EliteDesk 800 G1 driver: e1000e
v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: ASUSTek USB-N53 802.11abgn Network Adapter [Ralink RT3572] type: USB
driver: rt2800usb bus-ID: 1-1:2 chip-ID: 0b05:179d class-ID: 0000 serial: <filter>
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-2:3 chip-ID: 0bda:8771
class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 8a6b hci-v: 5.1 rev: 9a9
Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 298.09 GiB used: 43.15 GiB (14.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320413AS size: 298.09 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: JC49
scheme: GPT
Partition:
ID-1: / raw-size: 142.96 GiB size: 139.66 GiB (97.69%) used: 42.2 GiB (30.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 45.9 MiB (18.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 71.1 GiB size: 68.94 GiB (96.95%) used: 925.1 MiB (1.3%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 32.35 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 46.0 C mobo: N/A gpu: nvidia temp: 36 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 86%
Repos:
Packages: pm: dpkg pkgs: 2603 libs: 1469 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://mirror.aarnet.edu.au/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.datamossa.io/mxlinux/mx/repo/ bookworm main non-free
2: deb http://mirror.datamossa.io/mxlinux/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb https://apt.syncthing.net/ syncthing stable
Info:
Processes: 263 Uptime: 10m wakeups: 1 Memory: 27.35 GiB used: 2.94 GiB (10.7%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 4:56 pm
by Melber
@Jerry3904 @i_ri
idesk 0.7.8-0.1.mx23+1
mx-idesktool 23.06.02mx23
something weird going on with svg icons - colours are inverted and transparency shows as black
quickshot_230608_225031.png
png & xpm icons display correctly
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 5:37 pm
by Jerry3904
No idea yet, haven't even had time to test the new papirus set. Was everything correct with the former set?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 8:31 pm
by Jerry3904
I ran a set of MX Tools to see: do these look normal?
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 08, 2023 10:59 pm
by asqwerth
jasalt wrote: ↑Wed Jun 07, 2023 3:08 am
KDE Connect has similar problems as SAMBA with default firewall settings as noted in earlier comment
viewtopic.php?p=726569#p726569.
While it's probably a nice thing to have firewall on by default, maybe there could be a more verbose info about the possible side effects with regularly used services in release docs? This way it might not come as a surprise for many who are used to having firewall off by default. And while it probably would be an overkill solution, maybe even open ports by default if user installs Samba, KDE Connect etc?
In my case after couple tries failing to connect a device with KDE Connect I figured this out while skimming through it's FAQ pointing to add following ufw rules:
Code: Select all
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
Good job with the release! Seems promising so far as some deal breaking problems with KDE Desktop version have been ironed out since MX21 / Bullseye.
The graphical frontend for ufw (gufw) has a long list of application preset rules one can choose from to add:
ksnip_20230609-104408-a.png
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 1:21 am
by Melber
Jerry3904 wrote: ↑Thu Jun 08, 2023 8:31 pm
I ran a set of MX Tools to see: do these look normal?
No, the colours are inverted.
This is happening for me with any svg icon from any icon theme, the issue is not restricted to just mx papirus icons...
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 1:42 am
by OlafD
dolphin_oracle wrote: ↑Wed Jun 07, 2023 8:09 am
OlafD wrote: ↑Wed Jun 07, 2023 1:34 am
OlafD wrote: ↑Tue Jun 06, 2023 6:33 am
xfce 64bit
Hi,
now I have the problem for the second time:
I start virt-manager (previously I added myself to the group "libvirt" and started libvirtd), start MX21xfce live-iso, start the installation. The VM stops at 15%, I could just give the computer name. The mouse moved only stuttering, but slower than slow motion. Keyboard input was no longer accepted. I could not close any windows either. Ctrl+Alt+Del did not help either.
I had to turn off the laptop without shutting down.
After rebooting the laptop and logging in as user, I got a popup that wanted the password for root to run xkill. I didn't give this password during the installation and so it doesn't work. As user I can not run sudo: I get the message that I am not in the sudoers file.
Before the crash, my user password worked fine.
I can't explain it to myself.
What can I provide you (besides QSI) so that you can possibly find something with your trained eyes and knowledge.
As I said, it happened for the second time now.
Thank you very much in advance.
Translated with
www.DeepL.com/Translator (free version)
Code: Select all
Snapshot created on: 20230604_1254
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro rootflags=subvol=@ quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23 beta 1_x64 Libretto Juni 04 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Apple product: MacBookPro11,1 v: 1.0 serial: <superuser required> Chassis:
type: 10 v: Mac-189A3D4F975D5FFC serial: <superuser required>
Mobo: Apple model: Mac-189A3D4F975D5FFC v: MacBookPro11,1 serial: <superuser required>
UEFI: Apple v: 431.0.0.0.0 date: 02/22/2021
Battery:
ID-1: BAT0 charge: 54.0 Wh (98.9%) condition: 54.6/71.5 Wh (76.3%) volts: 12.9 min: 11.3
model: SMP bq20z451 type: Li-ion serial: N/A status: charging cycles: 998
CPU:
Info: model: Intel Core i5-4278U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1200 min/max: 800/3100 scaling: driver: intel_cpufreq governor: ondemand
cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 20801
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel
arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: DP-2 off: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a2e class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-2 model: Dell U2717D serial: <filter> built: 2019 res: 2560x1440 hz: 60 dpi: 109
gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440
min: 720x400
Monitor-2: eDP-1 note: disabled pos: primary model: Apple Color LCD built: 2013 res: 2560x1440
dpi: 227 gamma: 1.2 size: 286x179mm (11.26x7.05") diag: 337mm (13.3") ratio: 16:10
modes: 2560x1600
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Iris Graphics 5100 (HSW GT3)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:9c20 class-ID: 0403
Device-3: Broadcom 720p FaceTime HD Camera driver: N/A pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 02:00.0 chip-ID: 14e4:1570 class-ID: 0480
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:9
chip-ID: 05ac:8289 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 4196 hci-v: 4.0 rev: 2467
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 113 GiB used: 17.56 GiB (15.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: SSD SD0128F size: 113 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 321 scheme: GPT
Partition:
ID-1: / raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 562 KiB (0.2%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 112.74 GiB size: 112.74 GiB (100.00%) used: 17.56 GiB (15.6%) fs: btrfs
dev: /dev/sda2 maj-min: 8:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 66.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2109 libs: 1071 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 246 Uptime: 1h 31m wakeups: 3 Memory: 7.67 GiB used: 4.11 GiB (53.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Edit 1: The brightness buttons for the screen on the keyboard no longer work either. I do get the popup for the brightness control, but nothing is changed. I have to use the brightness systray.
Edit 2: I think it has something to do with btrfs. I had such a problem also once under Spiral Linux and VirtualBox.
My technical understanding is very minimal, but if I imagine that a VM wants to create an ext4 filesystem on a btrfs host system that it will cause problems there.
Would be nice if I could get some "enlightenment" from you guys ;-)
My plan is to start a fresh install with ext4.
I have no experience with libvirt and virt manager, but I can't imagine the creation of a file with an ext4 file system inside, would matter. but obviously there were major issues if the installation on the virtual machine messed up your real machine. that should never happen.
Do you still want any logs or similar or is it not worth investigating the errors? I would then set up my system again.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 2:50 am
by asqwerth
fehlix wrote: ↑Tue Jun 06, 2023 6:20 am
The issue seems to be related to ntpsec - not to nala.
When starting here in VM,
ntpd is running, but with either an empty /run/ntpd.pid or with a pid which does not exists.
Now when tzdata get upgraded, it triggers a restart of ntpsec -service to restart ntpd,
by fist stopping the daemon with
which appears to be successfully finished.
But due to the wrong or missing pid in /run/ntpd.pid
ntpd is still running, which can be manually checked after reboot with:
Code: Select all
sudo service ntpsec stop
Stopping NTP server: ntpd.
sudo service ntpsec status
NTP server is running.
tzdata upgrade triggers a restart and hangs b/c it cannot start the already running ntpd.
It hangs exactly 3 minutes to establish a flock with flock -w 180 , due to this start clause.....
Is there a solution to this? I just updated my laptop and the ntp update did indeed lead to the long hanging of nala. I let the upgrade run for a further 20 mins from the time I noticed the upgrade hanging, but in the end I had to close the terminal manually.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 5:33 am
by jasalt
asqwerth wrote: ↑Thu Jun 08, 2023 10:59 pm
The graphical frontend for ufw (gufw) has a long list of application preset rules one can choose from to add:
ksnip_20230609-104408-a.png
Seems useful, maybe note about it in documentation to make less people trip on it? Current manual version shortly mentions Gufw being installed by default (section 4.5.1) but it doesn't seem to be on KDE version at least.. maybe manual sections of services like SAMBA (3.5.4) etc. could point to adding required firewall rules also.
EDIT: Found Firewall settings front-end in KDE System Settings. It has preset for SAMBA at least.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 6:06 am
by Jerry3904
Seems useful, maybe note about it in documentation to make less people trip on it?
@jasalt Can you write me
a short sentence or two to use? The Manual is currently being revised for MX-23 so the timing would be perfect.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 6:21 am
by ceeslans
Melber wrote: ↑Fri Jun 09, 2023 1:21 am
Jerry3904 wrote: ↑Thu Jun 08, 2023 8:31 pm
I ran a set of MX Tools to see: do these look normal?
No, the colours are inverted.
This is happening for me with any svg icon from any icon theme, the issue is not restricted to just mx papirus icons...
Same thing happening here. Sofar any/all .svg icons show up with inverted colors, and opaque black background instead of full transparency.
I've commented out idesk and idesktool on my current mxfb23 setup ...
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 6:58 am
by Jerry3904
@Stevo A couple of questions:
1. Was this version compiled with svg enabled, as
the repo states?
Code: Select all
SVG (if compiled with --enable-svg)
2. svg is supported in idesk according to that same website by two files that Debian does not appear to have (though Gnome does, it seems)
Code: Select all
jb@mx:~$ apt policy librsvg
N: Unable to locate package librsvg
jb@mx:~$ apt policy gdk-pixbuf
N: Unable to locate package gdk-pixbuf
Were you able to get around that?
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 8:11 am
by Adrian
qback wrote: ↑Wed Jun 07, 2023 1:32 pm
2. While installing Flatpaks in MX installer there are question marks everywhere(photo)
Latest package build should fix that.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 12:03 pm
by i_ri
hello dolphin_oracle
knee-slap
Hello Melber
,so, idesk gets its own icon directory?
[idesktool line 127}
icondir=/usr/share/icons/Papirus/48x48/appsidesk/
swap red and blue channels. assorted icons to run on idesk for while... [rgb is bgr(?)]
one new directory
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 12:05 pm
by i_ri
hello dolphin_oracle
libretto button
Ai button
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 4:53 pm
by jasalt
Jerry3904 wrote: ↑Fri Jun 09, 2023 6:06 am
Seems useful, maybe note about it in documentation to make less people trip on it?
@jasalt Can you write me
a short sentence or two to use? The Manual is currently being revised for MX-23 so the timing would be perfect.
4.5.1 Firewall section:
In MX23, the UFW firewall is enabled by default and set to ignore all incoming connections. This may also block some popular networking services like Samba, SSH, VNC or KDE Connect from working out-of-the box.
Firewall can be configured through graphical frontend "gufw" on XFCE or firewall section in KDE system settings which both also provide rule presets for some common services.
(well, the KDE Connect isn't so far mentioned elsewhere in manual, maybe add shortly into section 3.1 Peripherals...?)
Note text for services receiving incoming connections:
3.5.4 Samba & 6.7 SSH:
Remember to enable required ports on the UFW firewall which ignores all incoming connections by default. See also section 4.5.1. Firewall.
(ending of SSH sub-section 6.7.1 already has generic mention about firewalls.. requires reformatting a bit)
Correct and adjust as needed..
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 5:30 pm
by Jerry3904
Thanks!
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 6:23 pm
by FullScale4Me
jasalt wrote: ↑Fri Jun 09, 2023 4:53 pm
Jerry3904 wrote: ↑Fri Jun 09, 2023 6:06 am
Seems useful, maybe note about it in documentation to make less people trip on it?
@jasalt Can you write me
a short sentence or two to use? The Manual is currently being revised for MX-23 so the timing would be perfect.
4.5.1 Firewall section:
In MX23, the UFW firewall is enabled by default and set to ignore all incoming connections. This may also block some popular networking services like Samba, SSH, VNC or KDE Connect from working out-of-the box.
Firewall can be configured through graphical frontend "gufw" on XFCE or firewall section in KDE system settings which both also provide rule presets for some common services.
(well, the KDE Connect isn't so far mentioned elsewhere in manual, maybe add shortly into section 3.1 Peripherals...?)
Note text for services receiving incoming connections:
3.5.4 Samba & 6.7 SSH:
Remember to enable required ports on the UFW firewall which ignores all incoming connections by default. See also section 4.5.1. Firewall.
(ending of SSH sub-section 6.7.1 already has generic mention about firewalls.. requires reformatting a bit)
Correct and adjust as needed..
Adding to Section 3, 4 and MX Wiki Samba Help file. The
Gufw documentation has moved several times, currently
https://help.ubuntu.com/community/Gufw
Thanks jasalt!
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 09, 2023 9:09 pm
by slayd
I installed MX-23 KDE (and tried XFCE). I could not log in as my user.
The reboot (after install or subsequent) would get to a place where I had the option to enter Ctrl-D to continue or my root password.
If I selected Ctrl-D, the reboot would eventually bring up the log-in screen. Entering my password and logging in would bring me back to the log-in screen ad infinitum.
If I went into the root prompt at the option:
- my username was present in /etc/passwd,
- there was no home directory (/home/username) created. I believe this might be why I could never log-in.
Sorry, I no longer have the details of my installation, but I did monitor the logged data during installation and it appeared to look good with no errors.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 5:37 am
by MadMax
Today I updated both of my VM installations of MX 23 beta and both hanged during the update via nala.
The first one asked me about updating /etc/X11/Xsession.d/98vboxadd-xclient which I responded with yes, then dpkg never finished at one of the later steps. The second one did not get far enough to ask me about the config file, but already hanged at configuring virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1). It appears something might be broken around there.
The same updates run through apt in a terminal without problems.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 6:38 am
by dolphin_oracle
MadMax wrote: ↑Sat Jun 10, 2023 5:37 am
Today I updated both of my VM installations of MX 23 beta and both hanged during the update via nala.
The first one asked me about updating /etc/X11/Xsession.d/98vboxadd-xclient which I responded with yes, then dpkg never finished at one of the later steps. The second one did not get far enough to ask me about the config file, but already hanged at configuring virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1). It appears something might be broken around there.
The same updates run through apt in a terminal without problems.
can you provide the apt-history for the update please.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 6:41 am
by fehlix
MadMax wrote: ↑Sat Jun 10, 2023 5:37 am
Today I updated both of my VM installations of MX 23 beta and both hanged during the update via nala.
The first one asked me about updating /etc/X11/Xsession.d/98vboxadd-xclient which I responded with yes, then dpkg never finished at one of the later steps. The second one did not get far enough to ask me about the config file, but already hanged at configuring virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1). It appears something might be broken around there.
The same updates run through apt in a terminal without problems.
Would be good to know which packages have been involved during that upgrade, where nala hangs.
Could you post apt-history - also found within "Quick System Info" tool.
And perhabs also both nala.log's (also available within QSI-tool)
Upgrade here went through without any hanger:
apt-history shows:
Code: Select all
2023-06-10 12:35:52 upgrade virtualbox-guest-x11:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 12:35:52 upgrade virtualbox-guest-utils:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 12:35:52 upgrade quick-system-info-gui:amd64 23.02.06 23.02.07
2023-06-10 12:35:51 upgrade mx-welcome-data:all 23.05.01mx23 23.06.01mx23
2023-06-10 12:35:51 upgrade mx-repo-manager:amd64 23.5.01 23.6
2023-06-10 12:35:50 upgrade mx-packageinstaller:amd64 23.5.03 23.6
2023-06-10 12:35:48 upgrade mx-docs:all 20230520+1 20230609mx23
2023-06-10 12:35:47 upgrade mx-boot-options:amd64 23.5 23.6
2023-06-10 12:35:45 upgrade librewolf:all 113.0.2-1 114.0.1-1
2023-06-07 14:46:09 upgrade papirus-icon-theme:all 20230104-2 20230601-0.1~mx23+1
2023-06-07 14:45:09 upgrade mx-installer:amd64 23.6.01mx23 23.6.02mx23
Thanks
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 7:51 am
by gRegNfo
Hi all,
I have installed the beta1, on btrfs (wich I think is the culprit)...and I have the following problem:
When I resume from suspend mode, it all seems fine after a few seconds of inactivity. But the wishker menu breaks and then the panel too.
I end up at a console window to login (after Alt+F4) and cant login, with some read errors from btrfs.
I have to do a cold shutdown and restart to get everything working.
I dont know about ext4 or other filesystem, but this one breaks.
Thanks!
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 7:53 am
by jasalt
Sure, glad to help out with the docs.
I tested adjusting UFW with KDE firewall settings application to allow incoming SSH connections but found out that making changes through there gives "Please restart plasma firewall, the backend disconnected." error banner when trying to add or remove rules.
Adding and modifying rules in command line works fine however eg. `sudo ufw allow ssh`. Not sure if it's MX23 related or Debian 12/KDE issue, but thought to note it here.
Code: Select all
[CODE]Snapshot created on: 20230610_0900
System:
Kernel: 6.2.14-1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
intel_pstate=disable hpet=disable rcupdate.rcu_expedited=1
BOOT_IMAGE=/vmlinuz-6.2.14-1-liquorix-amd64 root=UUID=<filter> ro
quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_x64 Libretto June 10
2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: LENOVO product: 20HMS2Q900 v: ThinkPad X270 serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 20HMS2Q900 serial: <superuser required> UEFI: LENOVO v: R0IET67W (1.45 )
date: 02/22/2022
Battery:
ID-1: BAT0 charge: 14.5 Wh (79.7%) condition: 18.2/23.2 Wh (78.7%) volts: 11.9 min: 11.1
model: SANYO 45N1773 type: Li-ion serial: <filter> status: not charging cycles: 135
ID-2: BAT1 charge: 18.6 Wh (96.9%) condition: 19.2/23.5 Wh (81.8%) volts: 12.0 min: 11.4
model: LGC 45N1127 type: Li-ion serial: <filter> status: discharging cycles: 302
CPU:
Info: model: Intel Core i7-7600U bits: 64 type: MT MCP arch: Amber/Kaby Lake note: check
gen: core 7 level: v3 note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 9 microcode: 0xF2
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 650 high: 900 min/max: 400/2801 boost: enabled scaling: driver: acpi-cpufreq
governor: ondemand cores: 1: 900 2: 900 3: 400 4: 400 bogomips: 23199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 620 vendor: Lenovo driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:5916 class-ID: 0300
Device-2: Lite-On Integrated Camera type: USB driver: uvcvideo bus-ID: 1-8:3 chip-ID: 04ca:7066
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: AU Optronics 0x106d built: 2017 res: 1920x1080 hz: 60 dpi: 177
gamma: 1.2 size: 276x155mm (10.87x6.1") diag: 317mm (12.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 620 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl, snd_soc_avs, snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71
class-ID: 0403
API: ALSA v: k6.2.14-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15d7 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: br-b710255e22d6 state: down mac: <filter>
IF-ID-2: br-fc7751ca2413 state: down mac: <filter>
IF-ID-3: docker0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:2
chip-ID: 8087:0a2b class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 100 hci-v: 4.2 rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 476.94 GiB used: 26.96 GiB (5.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLB512HAJQ-000L7 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 5L2QEXA7 temp: 32.9 C scheme: GPT
Partition:
ID-1: / raw-size: 124.98 GiB size: 122.46 GiB (97.98%) used: 26.82 GiB (21.9%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 500 MiB size: 458.3 MiB (91.67%) used: 87.1 MiB (19.0%) fs: ext4
dev: /dev/nvme0n1p6 maj-min: 259:6
ID-3: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 50.2 MiB (52.3%) fs: vfat
dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16.1 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-1
maj-min: 253:1 mapped: swap
Sensors:
System Temperatures: cpu: 53.0 C pch: 50.5 C mobo: N/A
Fan Speeds (RPM): fan-1: 3060
Repos:
Packages: 2820 pm: dpkg pkgs: 2811 libs: 1552 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 9
Active apt repos in: /etc/apt/sources.list
1: deb http://ppa.launchpad.net/uunicorn/open-fprintd/ubuntu kinetic main
2: deb-src http://ppa.launchpad.net/uunicorn/open-fprintd/ubuntu kinetic main
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb-src http://deb.debian.org/debian bookworm main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/docker.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.acc.umu.se/mirror/mxlinux.org/packages/mx/repo/ bookworm main non-free
2: deb http://ftp.acc.umu.se/mirror/mxlinux.org/packages/mx/repo/ bookworm ahs
Info:
Processes: 228 Uptime: 2h 29m wakeups: 6 Memory: 15.37 GiB used: 3.13 GiB (20.4%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
EDIT: Oops, I had the Liquorix kernel running, will try without it also...
EDIT2: Yes, problem with the default kernel also.
Screenshot_20230610_160357_mx23-beta1-kde-firewall-bug.jpg
Code: Select all
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro
quiet splash
I was trying the Liquorix 6.2 kernel for the new "retbleed=stuff" kernel parameter which would speed up Skylake Intel systems a bit but seemed they don't support it at the moment
https://github.com/zen-kernel/zen-kernel/issues/300.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 8:25 am
by MadMax
@dolphin_oracle @fehlix Sure thing. Here's the full data from the first VM:
Code: Select all
2023-06-10 10:59:37 upgrade skypeforlinux:amd64 8.98.0.206 8.98.0.402
2023-06-10 10:59:36 upgrade virtualbox-guest-x11:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 10:59:36 upgrade virtualbox-guest-utils:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 10:59:35 upgrade quick-system-info-gui:amd64 23.02.06 23.02.07
2023-06-10 10:59:35 upgrade qt6-gtk-platformtheme:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:59:35 upgrade qt5-gtk-platformtheme:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:59:34 upgrade pipewire-setup-mx:all 23.05.05 23.05.10
2023-06-10 10:58:31 upgrade papirus-icon-theme:all 20230104-2 20230601-0.1~mx23+1
2023-06-10 10:58:30 upgrade openssl:amd64 3.0.8-1 3.0.9-1
2023-06-10 10:58:30 upgrade mx-welcome-data:all 23.05.01mx23 23.06.01mx23
2023-06-10 10:58:29 upgrade mx-tweak:amd64 23.05.12mx23 23.06.01mx23
2023-06-10 10:58:29 upgrade mx-system:all 23.07.04mx23 23.07.06mx23
2023-06-10 10:58:28 upgrade mx-repo-manager:amd64 23.5.01 23.6
2023-06-10 10:58:27 upgrade mx-packageinstaller-pkglist:all 23.07.11mx23 23.07.12mx23
2023-06-10 10:58:27 upgrade mx-packageinstaller:amd64 23.5.03 23.6
2023-06-10 10:58:26 upgrade mx-installer:amd64 23.5.02mx23 23.6.02mx23
2023-06-10 10:58:26 upgrade mx-goodies:all 23.04.03 23.06.01
2023-06-10 10:58:22 upgrade mx-docs:all 20230519 20230609mx23
2023-06-10 10:58:22 upgrade mx-boot-options:amd64 23.5 23.6
2023-06-10 10:58:22 install libzxcvbn0:amd64 <none> 2.5+dfsg-1
2023-06-10 10:58:21 upgrade libxfce4ui-utils:amd64 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 10:58:21 upgrade libxfce4ui-2-0:amd64 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 10:58:20 upgrade libxfce4ui-common:all 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 10:58:19 upgrade libqt6widgets6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:19 upgrade libqt6sql6-sqlite:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:19 upgrade libqt6sql6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:18 upgrade qt6-qpa-plugins:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:18 upgrade libqt6network6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:17 upgrade libqt6gui6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:17 upgrade libqt6dbus6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:16 upgrade libqt6core6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:16 upgrade libqt6concurrent6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 10:58:16 upgrade libqt5xml5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:15 upgrade libqt5test5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:15 upgrade libqt5sql5-sqlite:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:14 upgrade libqt5sql5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:14 upgrade libqt5printsupport5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:14 upgrade libqt5concurrent5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:13 upgrade libopenjp2-7:amd64 2.5.0-1+b1 2.5.0-2
2023-06-10 10:58:13 upgrade libmariadb3:amd64 1:10.11.2-1 1:10.11.3-1
2023-06-10 10:58:12 upgrade mariadb-common:all 1:10.11.2-1 1:10.11.3-1
2023-06-10 10:58:12 upgrade libappstream4:amd64 0.16.1-1 0.16.1-2
2023-06-10 10:58:11 upgrade libpackagekit-glib2-18:amd64 1.2.6-4 1.2.6-5
2023-06-10 10:58:11 upgrade gir1.2-packagekitglib-1.0:amd64 1.2.6-4 1.2.6-5
2023-06-10 10:58:06 upgrade firefox:amd64 113.0.2~mozillabinaries-1mx23+1 114.0~mozillabinaries-1mx23+1
2023-06-10 10:58:06 upgrade desktop-defaults-mx-xfce-system:all 23.05.02mx23 23.06.01mx23
2023-06-10 10:58:06 upgrade desktop-defaults-mx-xfce:all 23.05.02mx23 23.06.01mx23
2023-06-10 10:58:05 upgrade desktop-defaults-mx-xfce-desktop:all 23.05.02mx23 23.06.01mx23
2023-06-10 10:58:05 upgrade bash-config:amd64 23.03.01 23.06.01
2023-06-10 10:58:04 upgrade libqt5widgets5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:04 upgrade libqt5gui5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:03 upgrade libqt5network5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:03 upgrade libqt5dbus5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:02 upgrade libqt5core5a:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 10:58:01 upgrade tzdata:all 2023c-4 2023c-5
2023-06-10 10:58:00 upgrade libselinux1:i386 3.4-1+b5 3.4-1+b6
2023-06-10 10:58:00 upgrade libselinux1:amd64 3.4-1+b5 3.4-1+b6
2023-06-10 10:57:59 upgrade adduser:all 3.133 3.134
2023-06-10 10:57:51 upgrade google-chrome-stable:amd64 113.0.5672.126-1 114.0.5735.106-1
2023-06-10 10:57:50 upgrade libcurl4:i386 7.88.1-9 7.88.1-10
2023-06-10 10:57:50 upgrade libcurl4:amd64 7.88.1-9 7.88.1-10
2023-06-10 10:57:49 upgrade libssl3:amd64 3.0.8-1 3.0.9-1
2023-06-10 10:57:49 upgrade curl:amd64 7.88.1-9 7.88.1-10
2023-06-10 10:57:48 upgrade libssl3:i386 3.0.8-1 3.0.9-1
2023-06-10 10:57:48 upgrade libcurl3-gnutls:amd64 7.88.1-9 7.88.1-10
Code: Select all
Protokoll gestartet: [2023-06-10 10:57:42 CEST]
Preconfiguring packages ...
Preconfiguring packages ...
Unpacking libcurl3-gnutls:amd64 (7.88.1-10) over (7.88.1-9) ...
De-configuring libssl3:amd64 (3.0.8-1), to allow configuration of libssl3:i386 (3.0.9-1) ...
Unpacking libssl3:i386 (3.0.9-1) over (3.0.8-1) ...
Unpacking libssl3:amd64 (3.0.9-1) over (3.0.8-1) ...
Unpacking curl (7.88.1-10) over (7.88.1-9) ...
De-configuring libcurl4:i386 (7.88.1-9), to allow configuration of libcurl4:amd64 (7.88.1-10) ...
Unpacking libcurl4:amd64 (7.88.1-10) over (7.88.1-9) ...
Unpacking libcurl4:i386 (7.88.1-10) over (7.88.1-9) ...
Unpacking google-chrome-stable (114.0.5735.106-1) over (113.0.5672.126-1) ...
Unpacking adduser (3.134) over (3.133) ...
Setting up adduser (3.134) ...
De-configuring libselinux1:i386 (3.4-1+b5), to allow configuration of libselinux1:amd64 (3.4-1+b6) ...
Unpacking libselinux1:amd64 (3.4-1+b6) over (3.4-1+b5) ...
Unpacking libselinux1:i386 (3.4-1+b6) over (3.4-1+b5) ...
Unpacking tzdata (2023c-5) over (2023c-4) ...
Unpacking libqt5core5a:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5dbus5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5network5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5gui5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5widgets5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking bash-config (23.06.01) over (23.03.01) ...
Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...
Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...
Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...
Unpacking firefox (114.0~mozillabinaries-1mx23+1) over (113.0.2~mozillabinaries-1mx23+1) ...
Unpacking libpackagekit-glib2-18:amd64 (1.2.6-5) over (1.2.6-4) ...
Unpacking gir1.2-packagekitglib-1.0 (1.2.6-5) over (1.2.6-4) ...
Unpacking libappstream4:amd64 (0.16.1-2) over (0.16.1-1) ...
Unpacking mariadb-common (1:10.11.3-1) over (1:10.11.2-1) ...
Unpacking libmariadb3:amd64 (1:10.11.3-1) over (1:10.11.2-1) ...
Unpacking libopenjp2-7:amd64 (2.5.0-2) over (2.5.0-1+b1) ...
Unpacking libqt5concurrent5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5printsupport5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5sql5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5test5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5xml5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt6core6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6concurrent6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6dbus6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6network6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6sql6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6widgets6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libxfce4ui-common (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libxfce4ui-utils (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...
Unpacking mx-boot-options (23.6) over (23.5) ...
Unpacking mx-docs (20230609mx23) over (20230519) ...
Unpacking mx-goodies (23.06.01) over (23.04.03) ...
Unpacking mx-installer (23.6.02mx23) over (23.5.02mx23) ...
Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...
Unpacking mx-packageinstaller (23.6) over (23.5.03) ...
Unpacking mx-repo-manager (23.6) over (23.5.01) ...
Unpacking mx-system (23.07.06mx23) over (23.07.04mx23) ...
Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...
Unpacking mx-welcome-data (23.06.01mx23) over (23.05.01mx23) ...
Unpacking openssl (3.0.9-1) over (3.0.8-1) ...
Unpacking papirus-icon-theme (20230601-0.1~mx23+1) over (20230104-2) ...
Unpacking pipewire-setup-mx (23.05.10) over (23.05.05) ...
Unpacking qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking quick-system-info-gui (23.02.07) over (23.02.06) ...
Unpacking virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...
Unpacking virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...
Unpacking skypeforlinux (8.98.0.402) over (8.98.0.206) ...
Setting up libzxcvbn0:amd64 (2.5+dfsg-1) ...
Setting up firefox (114.0~mozillabinaries-1mx23+1) ...
Setting up mx-system (23.07.06mx23) ...
Setting up libssl3:amd64 (3.0.9-1) ...
Setting up libssl3:i386 (3.0.9-1) ...
Setting up desktop-defaults-mx-xfce-desktop (23.06.01mx23) ...
Installing new version of config file /etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml ...
Setting up libpackagekit-glib2-18:amd64 (1.2.6-5) ...
Setting up libcurl3-gnutls:amd64 (7.88.1-10) ...
Setting up pipewire-setup-mx (23.05.10) ...
Setting up libqt6core6:amd64 (6.4.2+dfsg-10) ...
Setting up libappstream4:amd64 (0.16.1-2) ...
Setting up papirus-icon-theme (20230601-0.1~mx23+1) ...
Setting up mx-welcome-data (23.06.01mx23) ...
Setting up desktop-defaults-mx-xfce-system (23.06.01mx23) ...
98qtconfig not found...skipping...
Setting up tzdata (2023c-5) ...
Current default time zone: 'Europe/Berlin'
Local time is now: Sat Jun 10 11:00:08 CEST 2023.
Universal Time is now: Sat Jun 10 09:00:08 UTC 2023.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up mariadb-common (1:10.11.3-1) ...
Setting up libselinux1:amd64 (3.4-1+b6) ...
Setting up libselinux1:i386 (3.4-1+b6) ...
Setting up gir1.2-packagekitglib-1.0 (1.2.6-5) ...
Setting up virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) ...
Setting up libqt6sql6:amd64 (6.4.2+dfsg-10) ...
Setting up libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) ...
Setting up libmariadb3:amd64 (1:10.11.3-1) ...
Setting up libqt5core5a:amd64 (5.15.8+dfsg-11) ...
Setting up mx-docs (20230609mx23) ...
Setting up libqt5dbus5:amd64 (5.15.8+dfsg-11) ...
Setting up libcurl4:amd64 (7.88.1-10) ...
Setting up libcurl4:i386 (7.88.1-10) ...
Setting up libopenjp2-7:amd64 (2.5.0-2) ...
Setting up curl (7.88.1-10) ...
Setting up libxfce4ui-common (4.18.4-0.1~mx23+1) ...
Setting up mx-goodies (23.06.01) ...
Setting up libqt5test5:amd64 (5.15.8+dfsg-11) ...
Setting up openssl (3.0.9-1) ...
Installing new version of config file /etc/ssl/openssl.cnf ...
Setting up skypeforlinux (8.98.0.402) ...
Setting up libqt5concurrent5:amd64 (5.15.8+dfsg-11) ...
Setting up libqt6dbus6:amd64 (6.4.2+dfsg-10) ...
Setting up libqt6concurrent6:amd64 (6.4.2+dfsg-10) ...
Setting up desktop-defaults-mx-xfce (23.06.01mx23) ...
desktop-defaults-mx-xfce-system was already set to manually installed.
desktop-defaults-mx-xfce-desktop was already set to manually installed.
thunar-custom-actions-mx was already set to manually installed.
Setting up google-chrome-stable (114.0.5735.106-1) ...
Setting up libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) ...
Setting up libqt5network5:amd64 (5.15.8+dfsg-11) ...
Setting up libqt5sql5:amd64 (5.15.8+dfsg-11) ...
Setting up virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) ...
Installing new version of config file /etc/X11/Xsession.d/98vboxadd-xclient ...
Setting up libqt5xml5:amd64 (5.15.8+dfsg-11) ...
Setting up libqt6gui6:amd64 (6.4.2+dfsg-10) ...
Setting up qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) ...
Setting up libqt6network6:amd64 (6.4.2+dfsg-10) ...
Setting up libxfce4ui-utils (4.18.4-0.1~mx23+1) ...
Setting up libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) ...
Setting up qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) ...
Setting up libqt5gui5:amd64 (5.15.8+dfsg-11) ...
Setting up libqt5widgets5:amd64 (5.15.8+dfsg-11) ...
Setting up bash-config (23.06.01) ...
Setting up mx-tweak (23.06.01mx23) ...
Setting up qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11) ...
Setting up libqt6widgets6:amd64 (6.4.2+dfsg-10) ...
Setting up libqt5printsupport5:amd64 (5.15.8+dfsg-11) ...
Setting up quick-system-info-gui (23.02.07) ...
Setting up mx-repo-manager (23.6) ...
Setting up mx-boot-options (23.6) ...
Setting up mx-installer (23.6.02mx23) ...
Setting up mx-packageinstaller-pkglist (23.07.12mx23) ...
Setting up mx-packageinstaller (23.6) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for ntpsec (1.2.2+dfsg1-1) ...
Stopping NTP server: ntpd.
Starting NTP server: ntpd2023-06-10T11:01:20 ntpd[6320]: INIT: ntpd ntpsec-1.2.2: Starting
2023-06-10T11:01:20 ntpd[6320]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
.
Processing triggers for menu (2.1.49) ...
Processing triggers for mailcap (3.70+nmu1) ...
Processing triggers for desktop-file-utils (0.26-1) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for gnome-menus (3.36.0-1.1) ...
Processing triggers for libc-bin (2.36-9) ...
Code: Select all
Apt Do Install
Raw = False: [b'\rExtracting templates from packages: 46%']
Raw = False: [b'\rExtracting templates from packages: 92%']
Raw = False: [b'\rExtracting templates from packages: 100%\r\n']
Status_Split = [b'', b'Extracting templates from packages: 100%', b'\n']
Raw = False: [b'Preconfiguring packages ...\r\n']
Raw = False: [b'\rExtracting templates from packages: 46%']
Raw = False: [b'\rExtracting templates from packages: 92%']
Raw = False: [b'\rExtracting templates from packages: 100%\r\n']
Status_Split = [b'', b'Extracting templates from packages: 100%', b'\n']
Raw = False: [b'Preconfiguring packages ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r']
Raw = False: [b'(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r']
Raw = False: [b'(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 312332 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../0-libcurl3-gnutls_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libcurl3-gnutls:amd64 (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../1-libssl3_3.0.9-1_i386.deb ...\r\n']
Raw = False: [b'De-configuring libssl3:amd64 (3.0.8-1), to allow configuration of libssl3:i386 (3.0.9-1) ...']
Raw = False: [b'\r\n']
line_fix = [b'De-configuring libssl3:amd64 (3.0.8-1), to allow configuration of libssl3:i386 (3.0.9-1) ...']
Raw = False: [b'Unpacking libssl3:i386 (3.0.9-1) over (3.0.8-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../2-libssl3_3.0.9-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libssl3:amd64 (3.0.9-1) over (3.0.8-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../3-curl_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking curl (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../4-libcurl4_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'De-configuring libcurl4:i386 (7.88.1-9), to allow configuration of libcurl4:amd64 (7.88.1-10) ...\r\n']
Raw = False: [b'Unpacking libcurl4:amd64 (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../5-libcurl4_7.88.1-10_i386.deb ...\r\n']
Raw = False: [b'Unpacking libcurl4:i386 (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../6-google-chrome-stable_114.0.5735.106-1_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../6-google-chrome-stable_114.0.5735.106-1_amd64.deb ...']
Raw = False: [b'Unpacking google-chrome-stable (114.0.5735.106-1) over (113.0.5672.126-1) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking google-chrome-stable (114.0.5735.106-1) over (113.0.5672.126-1) ...']
Raw = False: [b'Preparing to unpack .../7-adduser_3.134_all.deb ...\r\n']
Raw = False: [b'Unpacking adduser (3.134) over (3.133) ...\r\n']
Raw = False: [b'Setting up adduser (3.134) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 312332 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../00-libselinux1_3.4-1+b6_amd64.deb ...\r\n']
Raw = False: [b'De-configuring libselinux1:i386 (3.4-1+b5), to allow configuration of libselinux1:amd64 (3.4-1+b6) ...\r\n']
Raw = False: [b'Unpacking libselinux1:amd64 (3.4-1+b6) over (3.4-1+b5) ...\r\n']
Raw = False: [b'Preparing to unpack .../01-libselinux1_3.4-1+b6_i386.deb ...\r\n']
Raw = False: [b'Unpacking libselinux1:i386 (3.4-1+b6) over (3.4-1+b5) ...\r\n']
Raw = False: [b'Preparing to unpack .../02-tzdata_2023c-5_all.deb ...\r\n']
Raw = False: [b'Unpacking tzdata (2023c-5) over (2023c-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../03-libqt5core5a_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5core5a:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../04-libqt5dbus5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5dbus5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../05-libqt5network5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5network5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../06-libqt5gui5_5.15.8+dfsg-11_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../06-libqt5gui5_5.15.8+dfsg-11_amd64.deb ...']
Raw = False: [b'Unpacking libqt5gui5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking libqt5gui5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...']
Raw = False: [b'Preparing to unpack .../07-libqt5widgets5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5widgets5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../08-bash-config_23.06.01_amd64.deb ...\r\n']
Raw = False: [b'Unpacking bash-config (23.06.01) over (23.03.01) ...\r\n']
Raw = False: [b'Preparing to unpack .../09-desktop-defaults-mx-xfce-desktop_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../10-desktop-defaults-mx-xfce-system_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../11-desktop-defaults-mx-xfce_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../12-firefox_114.0~mozillabinaries-1mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking firefox (114.0~mozillabinaries-1mx23+1) over (113.0.2~mozillabinaries-1mx23+1) ...\r\n']
Raw = False: [b'Preparing to unpack .../13-libpackagekit-glib2-18_1.2.6-5_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libpackagekit-glib2-18:amd64 (1.2.6-5) over (1.2.6-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../14-gir1.2-packagekitglib-1.0_1.2.6-5_amd64.deb ...\r\n']
Raw = False: [b'Unpacking gir1.2-packagekitglib-1.0 (1.2.6-5) over (1.2.6-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../15-libappstream4_0.16.1-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libappstream4:amd64 (0.16.1-2) over (0.16.1-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../16-mariadb-common_1%3a10.11.3-1_all.deb ...\r\n']
Raw = False: [b'Unpacking mariadb-common (1:10.11.3-1) over (1:10.11.2-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../17-libmariadb3_1%3a10.11.3-1_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../17-libmariadb3_1%3a10.11.3-1_amd64.deb ...']
Raw = False: [b'Unpacking libmariadb3:amd64 (1:10.11.3-1) over (1:10.11.2-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../18-libopenjp2-7_2.5.0-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libopenjp2-7:amd64 (2.5.0-2) over (2.5.0-1+b1) ...\r\n']
Raw = False: [b'Preparing to unpack .../19-libqt5concurrent5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5concurrent5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../20-libqt5printsupport5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5printsupport5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking libqt5printsupport5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...']
Raw = False: [b'Preparing to unpack .../21-libqt5sql5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5sql5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../22-libqt5sql5-sqlite_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../23-libqt5test5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5test5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../24-libqt5xml5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5xml5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../25-libqt6core6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6core6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../26-libqt6concurrent6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6concurrent6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../27-libqt6dbus6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6dbus6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../28-libqt6gui6_6.4.2+dfsg-10_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../28-libqt6gui6_6.4.2+dfsg-10_amd64.deb ...']
Raw = False: [b'Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...']
Raw = False: [b'Preparing to unpack .../29-qt6-qpa-plugins_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../30-libqt6network6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6network6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../31-libqt6sql6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6sql6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../32-libqt6sql6-sqlite_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../33-libqt6widgets6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6widgets6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../34-libxfce4ui-common_4.18.4-0.1~mx23+1_all.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-common (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../35-libxfce4ui-2-0_4.18.4-0.1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../36-libxfce4ui-utils_4.18.4-0.1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-utils (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Selecting previously unselected package libzxcvbn0:amd64.\r\n']
Raw = False: [b'Preparing to unpack .../37-libzxcvbn0_2.5+dfsg-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../38-mx-boot-options_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-boot-options (23.6) over (23.5) ...\r\n']
Raw = False: [b'Preparing to unpack .../39-mx-docs_20230609mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-docs (20230609mx23) over (20230519) ...\r\n']
Raw = False: [b'Preparing to unpack .../40-mx-goodies_23.06.01_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-goodies (23.06.01) over (23.04.03) ...\r\n']
Raw = False: [b'Preparing to unpack .../41-mx-installer_23.6.02mx23_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-installer (23.6.02mx23) over (23.5.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../42-mx-packageinstaller-pkglist_23.07.12mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../43-mx-packageinstaller_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-packageinstaller (23.6) over (23.5.03) ...\r\n']
Raw = False: [b'Preparing to unpack .../44-mx-repo-manager_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-repo-manager (23.6) over (23.5.01) ...\r\n']
Raw = False: [b'Preparing to unpack .../45-mx-system_23.07.06mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-system (23.07.06mx23) over (23.07.04mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../46-mx-tweak_23.06.01mx23_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../47-mx-welcome-data_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-welcome-data (23.06.01mx23) over (23.05.01mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../48-openssl_3.0.9-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking openssl (3.0.9-1) over (3.0.8-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../49-papirus-icon-theme_20230601-0.1~mx23+1_all.deb ...\r\n']
Raw = False: [b'Unpacking papirus-icon-theme (20230601-0.1~mx23+1) over (20230104-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../50-pipewire-setup-mx_23.05.10_all.deb ...\r\n']
Raw = False: [b'Unpacking pipewire-setup-mx (23.05.10) over (23.05.05) ...\r\n']
Raw = False: [b'Preparing to unpack .../51-qt5-gtk-platformtheme_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../52-qt6-gtk-platformtheme_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../53-quick-system-info-gui_23.02.07_amd64.deb ...\r\n']
Raw = False: [b'Unpacking quick-system-info-gui (23.02.07) over (23.02.06) ...\r\n']
Raw = False: [b'Preparing to unpack .../54-virtualbox-guest-x11_7.0.8-dfsg-1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b'Preparing to unpack .../55-virtualbox-guest-utils_7.0.8-dfsg-1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b'Preparing to unpack .../56-skypeforlinux_8.98.0.402_amd64.deb ...\r\n']
Raw = False: [b'Unpacking skypeforlinux (8.98.0.402) over (8.98.0.206) ...\r\n']
Raw = False: [b'Setting up libzxcvbn0:amd64 (2.5+dfsg-1) ...\r\n']
Raw = False: [b'Setting up firefox (114.0~mozillabinaries-1mx23+1) ...\r\n']
Raw = False: [b'Setting up mx-system (23.07.06mx23) ...\r\n']
Raw = False: [b'Setting up libssl3:amd64 (3.0.9-1) ...\r\n']
Raw = False: [b'Setting up libssl3:i386 (3.0.9-1) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce-desktop (23.06.01mx23) ...\r\n']
Raw = False: [b'Installing new version of config file /etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml ...\r\n']
Raw = False: [b'Setting up libpackagekit-glib2-18:amd64 (1.2.6-5) ...\r\n']
Raw = False: [b'Setting up libcurl3-gnutls:amd64 (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up pipewire-setup-mx (23.05.10) ...\r\n']
Raw = False: [b'Setting up libqt6core6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libappstream4:amd64 (0.16.1-2) ...\r\n']
Raw = False: [b'Setting up papirus-icon-theme (20230601-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up mx-welcome-data (23.06.01mx23) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce-system (23.06.01mx23) ...\r\n']
Raw = False: [b'98qtconfig not found...skipping...\r\n']
Raw = False: [b'Setting up tzdata (2023c-5) ...\r\n']
Raw = False: [b"\r\nCurrent default time zone: 'Europe/Berlin'\r\n"]
Data_Split = [b'', b"Current default time zone: 'Europe/Berlin'", b'']
Raw = False: [b"Local time is now: Sat Jun 10 11:00:08 CEST 2023.\r\nUniversal Time is now: Sat Jun 10 09:00:08 UTC 2023.\r\nRun 'dpkg-reconfigure tzdata' if you wish to change it.\r\n\r\n"]
Data_Split = [b'Local time is now: Sat Jun 10 11:00:08 CEST 2023.', b'Universal Time is now: Sat Jun 10 09:00:08 UTC 2023.', b"Run 'dpkg-reconfigure tzdata' if you wish to change it.", b'', b'']
Raw = False: [b'Setting up mariadb-common (1:10.11.3-1) ...\r\n']
Raw = False: [b'Setting up libselinux1:amd64 (3.4-1+b6) ...\r\n']
Raw = False: [b'Setting up libselinux1:i386 (3.4-1+b6) ...\r\n']
Raw = False: [b'Setting up gir1.2-packagekitglib-1.0 (1.2.6-5) ...\r\n']
Raw = False: [b'Setting up virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b'Setting up libqt6sql6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libmariadb3:amd64 (1:10.11.3-1) ...\r\n']
Raw = False: [b'Setting up libqt5core5a:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up mx-docs (20230609mx23) ...\r\n']
Raw = False: [b'Setting up libqt5dbus5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libcurl4:amd64 (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up libcurl4:i386 (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up libopenjp2-7:amd64 (2.5.0-2) ...\r\n']
Raw = False: [b'Setting up curl (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up libxfce4ui-common (4.18.4-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up mx-goodies (23.06.01) ...\r\n']
Raw = False: [b'Setting up libqt5test5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up openssl (3.0.9-1) ...\r\n']
Raw = False: [b'Installing new version of config file /etc/ssl/openssl.cnf ...\r\n']
Raw = False: [b'Setting up skypeforlinux (8.98.0.402) ...\r\n']
Raw = False: [b'Setting up libqt5concurrent5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libqt6dbus6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt6concurrent6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce (23.06.01mx23) ...\r\n']
Raw = False: [b'desktop-defaults-mx-xfce-system was already set to manually installed.\r\ndesktop-defaults-mx-xfce-desktop was already set to manually installed.\r\nthunar-custom-actions-mx was already set to manually installed.\r\n']
Data_Split = [b'desktop-defaults-mx-xfce-system was already set to manually installed.', b'desktop-defaults-mx-xfce-desktop was already set to manually installed.', b'thunar-custom-actions-mx was already set to manually installed.', b'']
Raw = False: [b'Setting up google-chrome-stable (114.0.5735.106-1) ...\r\n']
Raw = False: [b'Setting up libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up libqt5network5:amd64 (5.15.8+dfsg-11) ...']
Raw = False: [b'\r\n']
line_fix = [b'Setting up libqt5network5:amd64 (5.15.8+dfsg-11) ...']
Raw = False: [b'Setting up libqt5sql5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) ...\r\n']
Raw = True: [b"\r\nConfiguration file '/etc/X11/Xsession.d/98vboxadd-xclient'\r\n ==> Modified (by you or by a script) since installation.\r\n ==> Package distributor has shipped an updated version.\r\n What would you like to do about it ? Your options are:\r\n Y or I : install the package maintainer's version\r\n N or O : keep your currently-installed version\r\n D : show the differences between the versions\r\n Z : start a shell to examine the situation\r\n The default action is to keep your current version.\r\n*** 98vboxadd-xclient (Y/I/N/O/D/Z) [default=N] ? "]
Raw = True: [b'd']
Raw = True: [b'\r\n']
Raw = True: [b'\x1b[?1049h\x1b[22;0;0t\x1b[?1h\x1b=\r--- /etc/X11/Xsession.d/98vboxadd-xclient 2023-06-10 10:59:41.720845875 +0200\r\n+++ /etc/X11/Xsession.d/98vboxadd-xclient.dpkg-new 2023-04-20 23:12:40.000000000 +0200\r\n@@ -4,15 +4,25 @@\r\n #\r\n \r\n #\r\n-# Copyright (C) 2007-2020 Oracle Corporation\r\n+# Copyright (C) 2007-2023 Oracle and/or its affiliates.\r\n #\r\n-# This file is part of VirtualBox Open Source Edition (OSE), as\r\n-# available from http://www.virtualbox.org. This file is free software;\r\n-# you can redistribute it and/or modify it under the terms of the GNU\r\n-# General Public License (GPL) as published by the Free Software\r\n-# Foundation, in version 2 as it comes in the "COPYING" file of the\r\n-# VirtualBox OSE distribution. VirtualBox OSE is distributed in the\r\n-# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.\r\n+# This file is part of VirtualBox base platform packages, as']
Raw = True: [b'\r\n']
Raw = True: [b'+# available from https://www.virtualbox.org.\r\n+#\r\n+# This program is free software; you can redistribute it and/or\r\n+# modify it under the terms of the GNU General Public License']
Raw = True: [b'\r\n+# as published by the Free Software Foundation, in version 3 of the\r\n+# License.\r\n+#\r\n+# This program is distributed in the hope that it will be useful, but\r\n+# WITHOUT ANY WARRANTY; without even the implied warranty of\r\n+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r\n']
Raw = True: [b'+# General Public License for more details.\r\n+#\r\n+# You should have received a copy of the GNU General Public License\r\n+# along with this program; if not, see <https://www.gnu.org/licenses>.\r\n+#\r\n+# SPDX-License-Identifier: GPL-3.0-only\r\n #\r\n \r\n in_virtual_machine()\r\n@@ -36,19 +46,14 @@\r\n # Do not start if the kernel module is not present.\r\n # Execute notify-send in the back-ground to avoid racing with sddm,\r\n # as notify-send may wait for sddm to start while it waits for us to exit.\r\n- echo "VBoxClient: the VirtualBox kernel service is not running. Exiting." &\r\n\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K6\x086\x1b[K~\x08~\r\x1b[K+ notify-send "VBoxClient: the VirtualBox kernel service is not running. Exiting." &\r\n elif test -z "${SSH_CONNECTION}"; then\r\n # This script can also be triggered by a connection over SSH, which is not\r\n # what we had in mind, so we do not start VBoxClient in that case. We do\r\n # not use "exit" here as this script is "source"d, not executed.\r\n /usr/bin/VBoxClient --clipboard || true\r\n /usr/bin/VBoxClient --checkhostversion || true\r\n- /usr/bin/VBoxClient --display || true\r\n /usr/bin/VBoxClient --seamless || true\r\n /usr/bin/VBoxClient --draganddrop || true\r\n- if [ "$(VBoxClient -h |grep -q vmsvga-x11 && echo $?)" = "0" ]; then\r\n- /usr/bin/VBoxClient --vmsvga-x11 || true # In case VMSVGA emulation is enabled - older VB\r\n- else\r\n- /usr/bin/VBoxClient --vmsvga || true # In case VMSVGA emulation is enabled - newer\r\n- fi\r\n+ /usr/bin/VBoxClient --vmsvga-session || true # In case VMSVGA emulation is enabled\r\n fi\r\n\x1b[7m[Leertaste']
Raw = True: [b' zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K6\x086\x1b[K~\x08~\r\x1b[K\x07\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K6\x086\x1b[K~\x08~\r\x1b[K\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K5\x085\x1b[K~\x08~\r\x1b[K\x1b[H\x1bM+# This file is part of VirtualBox base platform packages, as\r\n\x1b[H\x1bM-# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.\r\n\x1b[H\x1bM-# VirtualBox OSE distribution. VirtualBox OSE is distributed in the\r\n\x1b[H\x1bM-# Foundation, in version 2 as it comes in the "COPYING" file of the\r\n\x1b[H\x1bM-# General Public License (GPL) as published by the Free Software\r\n\x1b[H\x1bM-# you can redistribute it and/or modify it under the terms of the GNU\r\n\x1b[H\x1bM-# available from http://www.virtualbox.org. This file is free software;\r\n\x1b[H\x1bM-# This file is part of VirtualBox Open Source Edition (OSE), as\r\n\x1b[H\x1bM #\r\n\x1b[H\x1bM+# Copyright (C) 2007-2023 Oracle and/or its affiliates.\r\n\x1b[H\x1bM-# Copyright (C) 2007-2020 Oracle Corporation\r\n\x1b[H\x1bM #\r\n\x1b[H\x1bM \r\n\x1b[H\x1bM #\r\n\x1b[H\x1bM@@ -4,15 +4,25 @@\r\n\x1b[H\x1bM+++ /etc/X11/Xsession.d/98vboxadd-xclient.dpkg-new 2023-04-20 23:12:40.000000000 +0200\r\n\x1b[H\x1bM--- /etc/X11/Xsession.d/98vboxadd-xclient 2023-06-10 10:59:41.720845875 +0200\r\n\x1b[42;1']
Raw = True: [b'H\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K5\x085\x1b[K~\x08~\r\x1b[K\x07\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K5\x085\x1b[K~\x08~\r\x1b[K\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K5\x085\x1b[K~\x08~\r\x1b[K\r\x1b[K\x1b[7m[Leertaste zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K \x1b[KESC\x08\x08\x08ESC\x1b[K[\x08[\x1b[K6\x086\x1b[K~\x08~\r\x1b[K+ notify-send "VBoxClient: the VirtualBox kernel service is not running. Exiting." &\r\n elif test -z "${SSH_CONNECTION}"; then\r\n # This script can also be triggered by a connection over SSH, which is not\r\n # what we had in mind, so we do not start VBoxClient in that case. We do\r\n # not use "exit" here as this script is "source"d, not executed.\r\n /usr/bin/VBoxClient --clipboard || true\r\n /usr/bin/VBoxClient --checkhostversion || true\r\n- /usr/bin/VBoxClient --display || true\r\n /usr/bin/VBoxClient --seamless || true\r\n /usr/bin/VBoxClient --draganddrop || true\r\n- if [ "$(VBoxClient -h |grep -q vmsvga-x11 && echo $?)" = "0" ]; then\r\n- /usr/bin/VBoxClient --vmsvga-x11 || true # In case VMSVGA emulation is enabled - older VB\r\n- else\r\n- /usr/bin/VBoxClient --vmsvga || true # In case VMSVGA emulation is enabled - newer\r\n- fi\r\n+ /usr/bin/VBoxClient --vmsvga-session || true # In case VMSVGA emulation is enabled\r\n fi\r\n\x1b[7m[Leertaste']
Raw = True: [b' zum Fortfahren, \xc2\xbbq\xc2\xab zum Beenden]\x1b[27m\x1b[K']
Raw = True: [b'\r\x1b[K\x1b[?1l\x1b>\x1b[?1049l\x1b[23;0;0t']
Raw = True: [b"\r\nConfiguration file '/etc/X11/Xsession.d/98vboxadd-xclient'\r\n ==> Modified (by you or by a script) since installation.\r\n ==> Package distributor has shipped an updated version.\r\n What would you like to do about it ? Your options are:\r\n Y or I : install the package maintainer's version\r\n N or O : keep your currently-installed version\r\n D : show the differences between the versions\r\n Z : start a shell to examine the situation\r\n The default action is to keep your current version.\r\n*** 98vboxadd-xclient (Y/I/N/O/D/Z) [default=N] ? "]
Raw = True: [b'y']
Raw = True: [b'\r\n']
Raw = False: [b'Installing new version of config file /etc/X11/Xsession.d/98vboxadd-xclient ...\r\n']
Raw = False: [b'Setting up libqt5xml5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libqt6gui6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt6network6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libxfce4ui-utils (4.18.4-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt5gui5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libqt5widgets5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up bash-config (23.06.01) ...\r\n']
Raw = False: [b'Setting up mx-tweak (23.06.01mx23) ...\r\n']
Raw = False: [b'Setting up qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11']
Raw = False: [b') ...\r\n']
line_fix = [b'Setting up qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11']
Raw = False: [b'Setting up libqt6widgets6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt5printsupport5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up quick-system-info-gui (23.02.07) ...\r\n']
Raw = False: [b'Setting up mx-repo-manager (23.6) ...\r\n']
Raw = False: [b'Setting up mx-boot-options (23.6) ...\r\n']
Raw = False: [b'Setting up mx-installer (23.6.02mx23) ...\r\n']
Raw = False: [b'Setting up mx-packageinstaller-pkglist (23.07.12mx23) ...\r\n']
Raw = False: [b'Setting up mx-packageinstaller (23.6) ...\r\n']
Raw = False: [b'Processing triggers for man-db (2.11.2-2) ...\r\n']
Raw = False: [b'Processing triggers for ntpsec (1.2.2+dfsg1-1) ...\r\n']
Raw = False: [b'Stopping NTP server: ntpd']
Raw = False: [b'.\r\n']
line_fix = [b'Stopping NTP server: ntpd']
Raw = False: [b'Starting NTP server: ntpd']
Raw = False: [b'2023-06-10T11:01:20 ntpd[6320]: INIT: ntpd ntpsec-1.2.2: Starting']
Raw = False: [b'\r\n2023-06-10T11:01:20 ntpd[6320]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec\r\n']
line_fix = [b'Starting NTP server: ntpd', b'2023-06-10T11:01:20 ntpd[6320]: INIT: ntpd ntpsec-1.2.2: Starting']
Data_Split = [b'Starting NTP server: ntpd2023-06-10T11:01:20 ntpd[6320]: INIT: ntpd ntpsec-1.2.2: Starting', b'2023-06-10T11:01:20 ntpd[6320]: INIT: Command line: /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec', b'']
Raw = False: [b'.\r\nProcessing triggers for menu (2.1.49) ...\r\n']
Data_Split = [b'.', b'Processing triggers for menu (2.1.49) ...', b'']
Raw = False: [b'Processing triggers for mailcap (3.70+nmu1) ...\r\n']
Raw = False: [b'Processing triggers for desktop-file-utils (0.26-1) ...\r\n']
Raw = False: [b'Processing triggers for hicolor-icon-theme (0.17-2) ...\r\n']
Raw = False: [b'Processing triggers for gnome-menus (3.36.0-1.1) ...\r\n']
Raw = False: [b'Processing triggers for libc-bin (2.36-9) ...\r\n']
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 8:30 am
by MadMax
And here we have the second one:
Code: Select all
2023-06-10 11:25:56 upgrade virtualbox-guest-x11:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 11:25:56 upgrade virtualbox-guest-utils:amd64 7.0.6-dfsg-1~mx23+1 7.0.8-dfsg-1~mx23+1
2023-06-10 11:25:55 upgrade quick-system-info-gui:amd64 23.02.06 23.02.07
2023-06-10 11:25:55 upgrade qt6-gtk-platformtheme:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:25:54 upgrade qt5-gtk-platformtheme:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:25:54 upgrade pipewire-setup-mx:all 23.05.04 23.05.10
2023-06-10 11:24:41 upgrade papirus-icon-theme:all 20230104-2 20230601-0.1~mx23+1
2023-06-10 11:24:41 upgrade openssl:amd64 3.0.8-1 3.0.9-1
2023-06-10 11:24:40 upgrade mx-welcome-data:all 23.05.01mx23 23.06.01mx23
2023-06-10 11:24:40 upgrade mx-tweak:amd64 23.05.12mx23 23.06.01mx23
2023-06-10 11:24:39 upgrade mx-system:all 23.07.04mx23 23.07.06mx23
2023-06-10 11:24:39 upgrade mx-repo-manager:amd64 23.5.01 23.6
2023-06-10 11:24:38 upgrade mx-packageinstaller:amd64 23.5.02 23.6
2023-06-10 11:24:37 upgrade mx-packageinstaller-pkglist:all 23.07.11mx23 23.07.12mx23
2023-06-10 11:24:37 upgrade mx-installer:amd64 23.5.02mx23 23.6.02mx23
2023-06-10 11:24:36 upgrade mx-goodies:all 23.04.03 23.06.01
2023-06-10 11:24:32 upgrade mx-docs:all 20230519 20230609mx23
2023-06-10 11:24:32 upgrade mx-boot-options:amd64 23.5 23.6
2023-06-10 11:24:31 upgrade mobile-broadband-provider-info:all 20221107-1 20230416-1
2023-06-10 11:24:31 upgrade lo-main-helper:all 23.07.11mx23 23.07.12mx23
2023-06-10 11:24:31 install libzxcvbn0:amd64 <none> 2.5+dfsg-1
2023-06-10 11:24:30 upgrade libxfce4ui-utils:amd64 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 11:24:30 upgrade libxfce4ui-2-0:amd64 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 11:24:29 upgrade libxfce4ui-common:all 4.18.2-2 4.18.4-0.1~mx23+1
2023-06-10 11:24:29 upgrade libreoffice-style-sifr:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:28 upgrade libreoffice-style-breeze:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:27 upgrade libreoffice-sdbc-hsqldb:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:27 upgrade libreoffice-report-builder-bin:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:26 upgrade libqt6widgets6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:26 upgrade libqt6sql6-sqlite:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:25 upgrade qt6-qpa-plugins:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:25 upgrade libqt6sql6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:25 upgrade libqt6network6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:24 upgrade libqt6gui6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:23 upgrade libqt6dbus6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:23 upgrade libqt6concurrent6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:22 upgrade libqt6core6:amd64 6.4.2+dfsg-9 6.4.2+dfsg-10
2023-06-10 11:24:22 upgrade libqt5xml5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:21 upgrade libqt5test5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:21 upgrade libqt5sql5-sqlite:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:21 upgrade libqt5sql5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:20 upgrade libqt5printsupport5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:20 upgrade libqt5concurrent5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:19 upgrade libreoffice-java-common:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:19 upgrade liblibreoffice-java:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:24:18 upgrade libappstream4:amd64 0.16.1-1 0.16.1-2
2023-06-10 11:24:18 upgrade gir1.2-packagekitglib-1.0:amd64 1.2.6-4 1.2.6-5
2023-06-10 11:24:17 upgrade libpackagekit-glib2-18:amd64 1.2.6-4 1.2.6-5
2023-06-10 11:24:12 upgrade firefox:amd64 113.0.2~mozillabinaries-1mx23+1 114.0~mozillabinaries-1mx23+1
2023-06-10 11:24:12 upgrade desktop-defaults-mx-xfce:all 23.05.02mx23 23.06.01mx23
2023-06-10 11:24:11 upgrade desktop-defaults-mx-xfce-system:all 23.05.02mx23 23.06.01mx23
2023-06-10 11:24:11 upgrade desktop-defaults-mx-xfce-desktop:all 23.05.02mx23 23.06.01mx23
2023-06-10 11:24:10 upgrade libcurl4:amd64 7.88.1-9 7.88.1-10
2023-06-10 11:24:10 upgrade curl:amd64 7.88.1-9 7.88.1-10
2023-06-10 11:24:09 upgrade libqt5widgets5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:09 upgrade bash-config:amd64 23.03.01 23.06.01
2023-06-10 11:24:08 upgrade libqt5gui5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:07 upgrade libssl3:amd64 3.0.8-1 3.0.9-1
2023-06-10 11:24:07 upgrade libqt5network5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:06 upgrade libqt5dbus5:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:05 upgrade libqt5core5a:amd64 5.15.8+dfsg-10 5.15.8+dfsg-11
2023-06-10 11:24:05 upgrade apt-transport-https:all 2.6.0 2.6.1
2023-06-10 11:24:03 upgrade tzdata:all 2023c-4 2023c-5
2023-06-10 11:24:02 upgrade libsepol2:amd64 3.4-2 3.4-2.1
2023-06-10 11:24:01 upgrade samba-common:all 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:24:01 upgrade libselinux1:amd64 3.4-1+b5 3.4-1+b6
2023-06-10 11:24:00 upgrade python3-samba:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:59 upgrade samba:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:58 upgrade samba-libs:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:57 upgrade samba-common-bin:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:57 upgrade libwbclient0:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:56 upgrade python3-ldb:amd64 2:2.6.2+samba4.17.8+dfsg-1 2:2.6.2+samba4.17.8+dfsg-2
2023-06-10 11:23:56 upgrade libldb2:amd64 2:2.6.2+samba4.17.8+dfsg-1 2:2.6.2+samba4.17.8+dfsg-2
2023-06-10 11:23:55 upgrade sane-utils:amd64 1.2.1-1 1.2.1-2
2023-06-10 11:23:55 upgrade libsmbclient:amd64 2:4.17.8+dfsg-1 2:4.17.8+dfsg-2
2023-06-10 11:23:54 upgrade libsane-common:all 1.2.1-1 1.2.1-2
2023-06-10 11:23:53 upgrade libsane1:amd64 1.2.1-1 1.2.1-2
2023-06-10 11:23:53 upgrade libopenjp2-7:amd64 2.5.0-1+b1 2.5.0-2
2023-06-10 11:23:52 upgrade libcurl3-gnutls:amd64 7.88.1-9 7.88.1-10
2023-06-10 11:23:51 upgrade libreoffice-style-colibre:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:48 upgrade libreoffice-core:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:47 upgrade libreoffice-draw:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:46 upgrade libreoffice-gtk3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:46 upgrade libreoffice-base-core:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:45 upgrade libreoffice-gnome:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:44 upgrade libreoffice-base:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:43 upgrade libreoffice-base-drivers:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:40 upgrade libreoffice-common:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:38 upgrade libreoffice-calc:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:34 upgrade libreoffice-help-common:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:32 upgrade libreoffice-help-en-us:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:31 upgrade libreoffice-impress:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:29 upgrade libreoffice-writer:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:28 upgrade libreoffice-math:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:27 upgrade fonts-opensymbol:all 4:102.12+LibO7.4.5-2 4:102.12+LibO7.4.5-3
2023-06-10 11:23:26 upgrade uno-libs-private:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:26 upgrade libuno-purpenvhelpergcc3-3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:25 upgrade libuno-cppuhelpergcc3-3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:25 upgrade libuno-cppu3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:24 upgrade libuno-salhelpergcc3-3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:23 upgrade libuno-sal3:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:23 upgrade libunoloader-java:all 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:22 upgrade ure:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:21 upgrade ure-java:amd64 4:7.4.5-2 4:7.4.5-3
2023-06-10 11:23:20 upgrade adduser:all 3.133 3.134
2023-06-10 11:23:19 upgrade apt-utils:amd64 2.6.0 2.6.1
2023-06-10 11:23:17 upgrade apt:amd64 2.6.0 2.6.1
2023-06-10 11:23:15 upgrade libapt-pkg6.0:amd64 2.6.0 2.6.1
Code: Select all
Protokoll gestartet: [2023-06-10 11:23:09 CEST]
Preconfiguring packages ...
Preconfiguring packages ...
Unpacking libapt-pkg6.0:amd64 (2.6.1) over (2.6.0) ...
Setting up libapt-pkg6.0:amd64 (2.6.1) ...
Unpacking apt (2.6.1) over (2.6.0) ...
Setting up apt (2.6.1) ...
Unpacking apt-utils (2.6.1) over (2.6.0) ...
Unpacking adduser (3.134) over (3.133) ...
Setting up adduser (3.134) ...
Unpacking ure-java (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking ure (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libunoloader-java (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libuno-sal3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libuno-salhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libuno-cppu3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libuno-cppuhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking uno-libs-private (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libuno-purpenvhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking fonts-opensymbol (4:102.12+LibO7.4.5-3) over (4:102.12+LibO7.4.5-2) ...
Unpacking libreoffice-math (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-writer (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-impress (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-help-en-us (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-help-common (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-calc (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-common (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-base-drivers (4:7.4.5-3) over (4:7.4.5-2) ...
No diversion 'diversion of /usr/lib/libreoffice/share/basic/dialog.xlc to /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess by libreoffice-base', none removed.
No diversion 'diversion of /usr/lib/libreoffice/share/basic/script.xlc to /usr/lib/libreoffice/share/basic/script.xlc.noaccess by libreoffice-base', none removed.
Unpacking libreoffice-base (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-gnome (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-gtk3 (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-base-core (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-draw (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-core (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-style-colibre (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libcurl3-gnutls:amd64 (7.88.1-10) over (7.88.1-9) ...
Unpacking libopenjp2-7:amd64 (2.5.0-2) over (2.5.0-1+b1) ...
Unpacking libsane1:amd64 (1.2.1-2) over (1.2.1-1) ...
Unpacking libsane-common (1.2.1-2) over (1.2.1-1) ...
Unpacking sane-utils (1.2.1-2) over (1.2.1-1) ...
Unpacking libsmbclient:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking python3-ldb (2:2.6.2+samba4.17.8+dfsg-2) over (2:2.6.2+samba4.17.8+dfsg-1) ...
Unpacking libldb2:amd64 (2:2.6.2+samba4.17.8+dfsg-2) over (2:2.6.2+samba4.17.8+dfsg-1) ...
Unpacking samba-common-bin (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking libwbclient0:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking samba-libs:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking samba (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking python3-samba (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking samba-common (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...
Unpacking libselinux1:amd64 (3.4-1+b6) over (3.4-1+b5) ...
Setting up libselinux1:amd64 (3.4-1+b6) ...
Unpacking libsepol2:amd64 (3.4-2.1) over (3.4-2) ...
Setting up libsepol2:amd64 (3.4-2.1) ...
Unpacking tzdata (2023c-5) over (2023c-4) ...
Unpacking apt-transport-https (2.6.1) over (2.6.0) ...
Unpacking libqt5core5a:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5dbus5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libssl3:amd64 (3.0.9-1) over (3.0.8-1) ...
Unpacking libqt5network5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5gui5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5widgets5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking bash-config (23.06.01) over (23.03.01) ...
Unpacking curl (7.88.1-10) over (7.88.1-9) ...
Unpacking libcurl4:amd64 (7.88.1-10) over (7.88.1-9) ...
Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...
Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...
Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...
Unpacking firefox (114.0~mozillabinaries-1mx23+1) over (113.0.2~mozillabinaries-1mx23+1) ...
Unpacking libpackagekit-glib2-18:amd64 (1.2.6-5) over (1.2.6-4) ...
Unpacking gir1.2-packagekitglib-1.0 (1.2.6-5) over (1.2.6-4) ...
Unpacking libappstream4:amd64 (0.16.1-2) over (0.16.1-1) ...
Unpacking libreoffice-java-common (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking liblibreoffice-java (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libqt5concurrent5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5printsupport5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5sql5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5test5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt5xml5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking libqt6core6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6concurrent6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6dbus6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6network6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6sql6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libqt6widgets6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking libreoffice-report-builder-bin (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-sdbc-hsqldb (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-style-breeze (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libreoffice-style-sifr (4:7.4.5-3) over (4:7.4.5-2) ...
Unpacking libxfce4ui-common (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libxfce4ui-utils (4.18.4-0.1~mx23+1) over (4.18.2-2) ...
Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...
Unpacking lo-main-helper (23.07.12mx23) over (23.07.11mx23) ...
Unpacking mobile-broadband-provider-info (20230416-1) over (20221107-1) ...
Unpacking mx-boot-options (23.6) over (23.5) ...
Unpacking mx-docs (20230609mx23) over (20230519) ...
Unpacking mx-goodies (23.06.01) over (23.04.03) ...
Unpacking mx-installer (23.6.02mx23) over (23.5.02mx23) ...
Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...
Unpacking mx-packageinstaller (23.6) over (23.5.02) ...
Unpacking mx-repo-manager (23.6) over (23.5.01) ...
Unpacking mx-system (23.07.06mx23) over (23.07.04mx23) ...
Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...
Unpacking mx-welcome-data (23.06.01mx23) over (23.05.01mx23) ...
Unpacking openssl (3.0.9-1) over (3.0.8-1) ...
Unpacking papirus-icon-theme (20230601-0.1~mx23+1) over (20230104-2) ...
Unpacking pipewire-setup-mx (23.05.10) over (23.05.04) ...
Unpacking qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...
Unpacking qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...
Unpacking quick-system-info-gui (23.02.07) over (23.02.06) ...
Unpacking virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...
Unpacking virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...
Setting up libzxcvbn0:amd64 (2.5+dfsg-1) ...
Setting up apt-utils (2.6.1) ...
Setting up apt-transport-https (2.6.1) ...
Setting up firefox (114.0~mozillabinaries-1mx23+1) ...
Setting up mobile-broadband-provider-info (20230416-1) ...
Setting up mx-system (23.07.06mx23) ...
Setting up libssl3:amd64 (3.0.9-1) ...
Setting up libuno-sal3 (4:7.4.5-3) ...
Setting up desktop-defaults-mx-xfce-desktop (23.06.01mx23) ...
Installing new version of config file /etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml ...
Setting up libpackagekit-glib2-18:amd64 (1.2.6-5) ...
Setting up libcurl3-gnutls:amd64 (7.88.1-10) ...
Setting up samba-common (2:4.17.8+dfsg-2) ...
Setting up pipewire-setup-mx (23.05.10) ...
Setting up libqt6core6:amd64 (6.4.2+dfsg-10) ...
Setting up libappstream4:amd64 (0.16.1-2) ...
Setting up libwbclient0:amd64 (2:4.17.8+dfsg-2) ...
Setting up papirus-icon-theme (20230601-0.1~mx23+1) ...
Setting up mx-welcome-data (23.06.01mx23) ...
Setting up desktop-defaults-mx-xfce-system (23.06.01mx23) ...
98qtconfig not found...skipping...
Setting up tzdata (2023c-5) ...
Current default time zone: 'Europe/Berlin'
Local time is now: Sat Jun 10 11:26:28 CEST 2023.
Universal Time is now: Sat Jun 10 09:26:28 UTC 2023.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up gir1.2-packagekitglib-1.0 (1.2.6-5) ...
Setting up libreoffice-style-colibre (4:7.4.5-3) ...
Setting up virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) ...
Setting up libqt6sql6:amd64 (6.4.2+dfsg-10) ...
Setting up libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) ...
Setting up libreoffice-style-breeze (4:7.4.5-3) ...
Setting up libqt5core5a:amd64 (5.15.8+dfsg-11) ...
Setting up lo-main-helper (23.07.12mx23) ...
Setting up mx-docs (20230609mx23) ...
Setting up libqt5dbus5:amd64 (5.15.8+dfsg-11) ...
Setting up libuno-salhelpergcc3-3 (4:7.4.5-3) ...
Setting up libcurl4:amd64 (7.88.1-10) ...
Setting up libopenjp2-7:amd64 (2.5.0-2) ...
Setting up curl (7.88.1-10) ...
Setting up libxfce4ui-common (4.18.4-0.1~mx23+1) ...
Setting up libunoloader-java (4:7.4.5-3) ...
Setting up libsane-common (1.2.1-2) ...
Setting up mx-goodies (23.06.01) ...
Setting up libqt5test5:amd64 (5.15.8+dfsg-11) ...
Setting up libldb2:amd64 (2:2.6.2+samba4.17.8+dfsg-2) ...
Setting up openssl (3.0.9-1) ...
Installing new version of config file /etc/ssl/openssl.cnf ...
Setting up libqt5concurrent5:amd64 (5.15.8+dfsg-11) ...
Setting up fonts-opensymbol (4:102.12+LibO7.4.5-3) ...
Setting up libqt6dbus6:amd64 (6.4.2+dfsg-10) ...
Setting up libqt6concurrent6:amd64 (6.4.2+dfsg-10) ...
Setting up desktop-defaults-mx-xfce (23.06.01mx23) ...
desktop-defaults-mx-xfce-system was already set to manually installed.
desktop-defaults-mx-xfce-desktop was already set to manually installed.
thunar-custom-actions-mx was already set to manually installed.
Setting up libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) ...
Setting up samba-libs:amd64 (2:4.17.8+dfsg-2) ...
Setting up libsane1:amd64 (1.2.1-2) ...
Setting up libqt5network5:amd64 (5.15.8+dfsg-11) ...
Setting up libqt5sql5:amd64 (5.15.8+dfsg-11) ...
Setting up virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) ...
Code: Select all
Apt Do Install
Raw = False: [b'\rExtracting templates from packages: 27%']
Raw = False: [b'\rExtracting templates from packages: 55%']
Raw = False: [b'\rExtracting templates from packages: 83%']
Raw = False: [b'\rExtracting templates from packages: 100%\r\n']
Status_Split = [b'', b'Extracting templates from packages: 100%', b'\n']
Raw = False: [b'Preconfiguring packages ...\r\n']
Raw = False: [b'\rExtracting templates from packages: 27%']
Raw = False: [b'\rExtracting templates from packages: 55%']
Raw = False: [b'\rExtracting templates from packages: 83%']
Raw = False: [b'\rExtracting templates from packages: 100%\r\n']
Status_Split = [b'', b'Extracting templates from packages: 100%', b'\n']
Raw = False: [b'Preconfiguring packages ...']
Raw = False: [b'\r\n']
line_fix = [b'Preconfiguring packages ...']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275053 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../libapt-pkg6.0_2.6.1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libapt-pkg6.0:amd64 (2.6.1) over (2.6.0) ...\r\n']
Raw = False: [b'Setting up libapt-pkg6.0:amd64 (2.6.1) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r']
Raw = False: [b'(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r']
Raw = False: [b'(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r']
Raw = False: [b'(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275053 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../archives/apt_2.6.1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking apt (2.6.1) over (2.6.0) ...\r\n']
Raw = False: [b'Setting up apt (2.6.1) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275053 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../apt-utils_2.6.1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking apt-utils (2.6.1) over (2.6.0) ...\r\n']
Raw = False: [b'Preparing to unpack .../archives/adduser_3.134_all.deb ...\r\n']
Raw = False: [b'Unpacking adduser (3.134) over (3.133) ...\r\n']
Raw = False: [b'Setting up adduser (3.134) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275053 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../00-ure-java_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking ure-java (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../01-ure_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking ure (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../02-libunoloader-java_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libunoloader-java (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../03-libuno-sal3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libuno-sal3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../04-libuno-salhelpergcc3-3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libuno-salhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../05-libuno-cppu3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libuno-cppu3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../06-libuno-cppuhelpergcc3-3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libuno-cppuhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../07-uno-libs-private_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking uno-libs-private (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../08-libuno-purpenvhelpergcc3-3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libuno-purpenvhelpergcc3-3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../09-fonts-opensymbol_4%3a102.12+LibO7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking fonts-opensymbol (4:102.12+LibO7.4.5-3) over (4:102.12+LibO7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../10-libreoffice-math_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-math (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../11-libreoffice-writer_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-writer (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../12-libreoffice-impress_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-impress (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../13-libreoffice-help-en-us_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-help-en-us (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../14-libreoffice-help-common_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-help-common (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../15-libreoffice-calc_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-calc (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../16-libreoffice-common_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-common (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../17-libreoffice-base-drivers_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-base-drivers (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../18-libreoffice-base_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b"No diversion 'diversion of /usr/lib/libreoffice/share/basic/dialog.xlc to /usr/lib/libreoffice/share/basic/dialog.xlc.noaccess by libreoffice-base', none removed.\r\n"]
Raw = False: [b"No diversion 'diversion of /usr/lib/libreoffice/share/basic/script.xlc to /usr/lib/libreoffice/share/basic/script.xlc.noaccess by libreoffice-base', none removed.\r\n"]
Raw = False: [b'Unpacking libreoffice-base (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../19-libreoffice-gnome_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-gnome (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../20-libreoffice-gtk3_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-gtk3 (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../21-libreoffice-base-core_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-base-core (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../22-libreoffice-draw_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-draw (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../23-libreoffice-core_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-core (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../24-libreoffice-style-colibre_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-style-colibre (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../25-libcurl3-gnutls_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libcurl3-gnutls:amd64 (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../26-libopenjp2-7_2.5.0-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libopenjp2-7:amd64 (2.5.0-2) over (2.5.0-1+b1) ...\r\n']
Raw = False: [b'Preparing to unpack .../27-libsane1_1.2.1-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libsane1:amd64 (1.2.1-2) over (1.2.1-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../28-libsane-common_1.2.1-2_all.deb ...\r\n']
Raw = False: [b'Unpacking libsane-common (1.2.1-2) over (1.2.1-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../29-sane-utils_1.2.1-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking sane-utils (1.2.1-2) over (1.2.1-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../30-libsmbclient_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libsmbclient:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../31-python3-ldb_2%3a2.6.2+samba4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking python3-ldb (2:2.6.2+samba4.17.8+dfsg-2) over (2:2.6.2+samba4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../32-libldb2_2%3a2.6.2+samba4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libldb2:amd64 (2:2.6.2+samba4.17.8+dfsg-2) over (2:2.6.2+samba4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../33-samba-common-bin_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking samba-common-bin (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../34-libwbclient0_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libwbclient0:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../35-samba-libs_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking samba-libs:amd64 (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../36-samba_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking samba (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../37-python3-samba_2%3a4.17.8+dfsg-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking python3-samba (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../38-samba-common_2%3a4.17.8+dfsg-2_all.deb ...\r\n']
Raw = False: [b'Unpacking samba-common (2:4.17.8+dfsg-2) over (2:4.17.8+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../39-libselinux1_3.4-1+b6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libselinux1:amd64 (3.4-1+b6) over (3.4-1+b5) ...\r\n']
Raw = False: [b'Setting up libselinux1:amd64 (3.4-1+b6) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275052 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../libsepol2_3.4-2.1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libsepol2:amd64 (3.4-2.1) over (3.4-2) ...\r\n']
Raw = False: [b'Setting up libsepol2:amd64 (3.4-2.1) ...\r\n']
Raw = False: [b'(Reading database ... \r']
Raw = False: [b'(Reading database ... 5%\r(Reading database ... 10%\r(Reading database ... 15%\r(Reading database ... 20%\r(Reading database ... 25%\r(Reading database ... 30%\r(Reading database ... 35%\r(Reading database ... 40%\r(Reading database ... 45%\r']
Raw = False: [b'(Reading database ... 50%\r']
Raw = False: [b'(Reading database ... 55%\r']
Raw = False: [b'(Reading database ... 60%\r']
Raw = False: [b'(Reading database ... 65%\r']
Raw = False: [b'(Reading database ... 70%\r']
Raw = False: [b'(Reading database ... 75%\r']
Raw = False: [b'(Reading database ... 80%\r']
Raw = False: [b'(Reading database ... 85%\r']
Raw = False: [b'(Reading database ... 90%\r']
Raw = False: [b'(Reading database ... 95%\r']
Raw = False: [b'(Reading database ... 100%\r(Reading database ... 275052 files and directories currently installed.)\r\n']
line_fix = [b'(Reading database ... \r']
Raw = False: [b'Preparing to unpack .../00-tzdata_2023c-5_all.deb ...\r\n']
Raw = False: [b'Unpacking tzdata (2023c-5) over (2023c-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../01-apt-transport-https_2.6.1_all.deb ...\r\n']
Raw = False: [b'Unpacking apt-transport-https (2.6.1) over (2.6.0) ...\r\n']
Raw = False: [b'Preparing to unpack .../02-libqt5core5a_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5core5a:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../03-libqt5dbus5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5dbus5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../04-libssl3_3.0.9-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libssl3:amd64 (3.0.9-1) over (3.0.8-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../05-libqt5network5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5network5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../06-libqt5gui5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5gui5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../07-libqt5widgets5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5widgets5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../08-bash-config_23.06.01_amd64.deb ...\r\n']
Raw = False: [b'Unpacking bash-config (23.06.01) over (23.03.01) ...\r\n']
Raw = False: [b'Preparing to unpack .../09-curl_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking curl (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../10-libcurl4_7.88.1-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libcurl4:amd64 (7.88.1-10) over (7.88.1-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../11-desktop-defaults-mx-xfce-desktop_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce-desktop (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../12-desktop-defaults-mx-xfce-system_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce-system (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../13-desktop-defaults-mx-xfce_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking desktop-defaults-mx-xfce (23.06.01mx23) over (23.05.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../14-firefox_114.0~mozillabinaries-1mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking firefox (114.0~mozillabinaries-1mx23+1) over (113.0.2~mozillabinaries-1mx23+1) ...\r\n']
Raw = False: [b'Preparing to unpack .../15-libpackagekit-glib2-18_1.2.6-5_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libpackagekit-glib2-18:amd64 (1.2.6-5) over (1.2.6-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../16-gir1.2-packagekitglib-1.0_1.2.6-5_amd64.deb ...\r\n']
Raw = False: [b'Unpacking gir1.2-packagekitglib-1.0 (1.2.6-5) over (1.2.6-4) ...\r\n']
Raw = False: [b'Preparing to unpack .../17-libappstream4_0.16.1-2_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libappstream4:amd64 (0.16.1-2) over (0.16.1-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../18-libreoffice-java-common_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-java-common (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../19-liblibreoffice-java_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking liblibreoffice-java (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../20-libqt5concurrent5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5concurrent5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../21-libqt5printsupport5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5printsupport5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../22-libqt5sql5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5sql5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../23-libqt5sql5-sqlite_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5sql5-sqlite:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../24-libqt5test5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5test5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../25-libqt5xml5_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt5xml5:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../26-libqt6core6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6core6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../27-libqt6concurrent6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6concurrent6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../28-libqt6dbus6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6dbus6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../29-libqt6gui6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking libqt6gui6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...']
Raw = False: [b'Preparing to unpack .../30-qt6-qpa-plugins_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt6-qpa-plugins:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../31-libqt6network6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6network6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../32-libqt6sql6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6sql6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../33-libqt6sql6-sqlite_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../34-libqt6widgets6_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libqt6widgets6:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../35-libreoffice-report-builder-bin_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-report-builder-bin (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../36-libreoffice-sdbc-hsqldb_4%3a7.4.5-3_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-sdbc-hsqldb (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../37-libreoffice-style-breeze_4%3a7.4.5-3_all.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../37-libreoffice-style-breeze_4%3a7.4.5-3_all.deb ...']
Raw = False: [b'Unpacking libreoffice-style-breeze (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../38-libreoffice-style-sifr_4%3a7.4.5-3_all.deb ...\r\n']
Raw = False: [b'Unpacking libreoffice-style-sifr (4:7.4.5-3) over (4:7.4.5-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../39-libxfce4ui-common_4.18.4-0.1~mx23+1_all.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-common (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../40-libxfce4ui-2-0_4.18.4-0.1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../41-libxfce4ui-utils_4.18.4-0.1~mx23+1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libxfce4ui-utils (4.18.4-0.1~mx23+1) over (4.18.2-2) ...\r\n']
Raw = False: [b'Selecting previously unselected package libzxcvbn0:amd64.\r\n']
Raw = False: [b'Preparing to unpack .../42-libzxcvbn0_2.5+dfsg-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking libzxcvbn0:amd64 (2.5+dfsg-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../43-lo-main-helper_23.07.12mx23_all.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../43-lo-main-helper_23.07.12mx23_all.deb ...']
Raw = False: [b'Unpacking lo-main-helper (23.07.12mx23) over (23.07.11mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../44-mobile-broadband-provider-info_20230416-1_all.deb ...\r\n']
Raw = False: [b'Unpacking mobile-broadband-provider-info (20230416-1) over (20221107-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../45-mx-boot-options_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-boot-options (23.6) over (23.5) ...\r\n']
Raw = False: [b'Preparing to unpack .../46-mx-docs_20230609mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-docs (20230609mx23) over (20230519) ...\r\n']
Raw = False: [b'Preparing to unpack .../47-mx-goodies_23.06.01_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-goodies (23.06.01) over (23.04.03) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking mx-goodies (23.06.01) over (23.04.03) ...']
Raw = False: [b'Preparing to unpack .../48-mx-installer_23.6.02mx23_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-installer (23.6.02mx23) over (23.5.02mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../49-mx-packageinstaller-pkglist_23.07.12mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-packageinstaller-pkglist (23.07.12mx23) over (23.07.11mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../50-mx-packageinstaller_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-packageinstaller (23.6) over (23.5.02) ...\r\n']
Raw = False: [b'Preparing to unpack .../51-mx-repo-manager_23.6_amd64.deb ...\r\n']
Raw = False: [b'Unpacking mx-repo-manager (23.6) over (23.5.01) ...\r\n']
Raw = False: [b'Preparing to unpack .../52-mx-system_23.07.06mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-system (23.07.06mx23) over (23.07.04mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../53-mx-tweak_23.06.01mx23_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../53-mx-tweak_23.06.01mx23_amd64.deb ...']
Raw = False: [b'Unpacking mx-tweak (23.06.01mx23) over (23.05.12mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../54-mx-welcome-data_23.06.01mx23_all.deb ...\r\n']
Raw = False: [b'Unpacking mx-welcome-data (23.06.01mx23) over (23.05.01mx23) ...\r\n']
Raw = False: [b'Preparing to unpack .../55-openssl_3.0.9-1_amd64.deb ...\r\n']
Raw = False: [b'Unpacking openssl (3.0.9-1) over (3.0.8-1) ...\r\n']
Raw = False: [b'Preparing to unpack .../56-papirus-icon-theme_20230601-0.1~mx23+1_all.deb ...\r\n']
Raw = False: [b'Unpacking papirus-icon-theme (20230601-0.1~mx23+1) over (20230104-2) ...\r\n']
Raw = False: [b'Preparing to unpack .../57-pipewire-setup-mx_23.05.10_all.deb ...\r\n']
Raw = False: [b'Unpacking pipewire-setup-mx (23.05.10) over (23.05.04) ...\r\n']
Raw = False: [b'Preparing to unpack .../58-qt5-gtk-platformtheme_5.15.8+dfsg-11_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt5-gtk-platformtheme:amd64 (5.15.8+dfsg-11) over (5.15.8+dfsg-10) ...\r\n']
Raw = False: [b'Preparing to unpack .../59-qt6-gtk-platformtheme_6.4.2+dfsg-10_amd64.deb ...\r\n']
Raw = False: [b'Unpacking qt6-gtk-platformtheme:amd64 (6.4.2+dfsg-10) over (6.4.2+dfsg-9) ...\r\n']
Raw = False: [b'Preparing to unpack .../60-quick-system-info-gui_23.02.07_amd64.deb ...\r\n']
Raw = False: [b'Unpacking quick-system-info-gui (23.02.07) over (23.02.06) ...\r\n']
Raw = False: [b'Preparing to unpack .../61-virtualbox-guest-x11_7.0.8-dfsg-1~mx23+1_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../61-virtualbox-guest-x11_7.0.8-dfsg-1~mx23+1_amd64.deb ...']
Raw = False: [b'Unpacking virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b'Preparing to unpack .../62-virtualbox-guest-utils_7.0.8-dfsg-1~mx23+1_amd64.deb ...']
Raw = False: [b'\r\n']
line_fix = [b'Preparing to unpack .../62-virtualbox-guest-utils_7.0.8-dfsg-1~mx23+1_amd64.deb ...']
Raw = False: [b'Unpacking virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...']
Raw = False: [b'\r\n']
line_fix = [b'Unpacking virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) over (7.0.6-dfsg-1~mx23+1) ...']
Raw = False: [b'Setting up libzxcvbn0:amd64 (2.5+dfsg-1) ...\r\n']
Raw = False: [b'Setting up apt-utils (2.6.1) ...\r\n']
Raw = False: [b'Setting up apt-transport-https (2.6.1) ...\r\n']
Raw = False: [b'Setting up firefox (114.0~mozillabinaries-1mx23+1) ...\r\n']
Raw = False: [b'Setting up mobile-broadband-provider-info (20230416-1) ...\r\n']
Raw = False: [b'Setting up mx-system (23.07.06mx23) ...\r\n']
Raw = False: [b'Setting up libssl3:amd64 (3.0.9-1) ...\r\n']
Raw = False: [b'Setting up libuno-sal3 (4:7.4.5-3) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce-desktop (23.06.01mx23) ...\r\n']
Raw = False: [b'Installing new version of config file /etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml ...\r\n']
Raw = False: [b'Setting up libpackagekit-glib2-18:amd64 (1.2.6-5) ...\r\n']
Raw = False: [b'Setting up libcurl3-gnutls:amd64 (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up samba-common (2:4.17.8+dfsg-2) ...']
Raw = False: [b'\r\n']
line_fix = [b'Setting up samba-common (2:4.17.8+dfsg-2) ...']
Raw = False: [b'Setting up pipewire-setup-mx (23.05.10) ...\r\n']
Raw = False: [b'Setting up libqt6core6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libappstream4:amd64 (0.16.1-2) ...\r\n']
Raw = False: [b'Setting up libwbclient0:amd64 (2:4.17.8+dfsg-2) ...\r\n']
Raw = False: [b'Setting up papirus-icon-theme (20230601-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up mx-welcome-data (23.06.01mx23) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce-system (23.06.01mx23) ...\r\n']
Raw = False: [b'98qtconfig not found...skipping...\r\n']
Raw = False: [b'Setting up tzdata (2023c-5) ...\r\n']
Raw = False: [b"\r\nCurrent default time zone: 'Europe/Berlin'\r\n"]
Data_Split = [b'', b"Current default time zone: 'Europe/Berlin'", b'']
Raw = False: [b"Local time is now: Sat Jun 10 11:26:28 CEST 2023.\r\nUniversal Time is now: Sat Jun 10 09:26:28 UTC 2023.\r\nRun 'dpkg-reconfigure tzdata' if you wish to change it.\r\n\r\n"]
Data_Split = [b'Local time is now: Sat Jun 10 11:26:28 CEST 2023.', b'Universal Time is now: Sat Jun 10 09:26:28 UTC 2023.', b"Run 'dpkg-reconfigure tzdata' if you wish to change it.", b'', b'']
Raw = False: [b'Setting up gir1.2-packagekitglib-1.0 (1.2.6-5) ...\r\n']
Raw = False: [b'Setting up libreoffice-style-colibre (4:7.4.5-3) ...\r\n']
Raw = False: [b'Setting up virtualbox-guest-utils (7.0.8-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b'Setting up libqt6sql6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt6sql6-sqlite:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libreoffice-style-breeze (4:7.4.5-3) ...\r\n']
Raw = False: [b'Setting up libqt5core5a:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up lo-main-helper (23.07.12mx23) ...\r\n']
Raw = False: [b'Setting up mx-docs (20230609mx23) ...\r\n']
Raw = False: [b'Setting up libqt5dbus5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libuno-salhelpergcc3-3 (4:7.4.5-3) ...\r\n']
Raw = False: [b'Setting up libcurl4:amd64 (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up libopenjp2-7:amd64 (2.5.0-2) ...\r\n']
Raw = False: [b'Setting up curl (7.88.1-10) ...\r\n']
Raw = False: [b'Setting up libxfce4ui-common (4.18.4-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up libunoloader-java (4:7.4.5-3) ...\r\n']
Raw = False: [b'Setting up libsane-common (1.2.1-2) ...\r\n']
Raw = False: [b'Setting up mx-goodies (23.06.01) ...\r\n']
Raw = False: [b'Setting up libqt5test5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libldb2:amd64 (2:2.6.2+samba4.17.8+dfsg-2) ...\r\n']
Raw = False: [b'Setting up openssl (3.0.9-1) ...\r\n']
Raw = False: [b'Installing new version of config file /etc/ssl/openssl.cnf ...\r\n']
Raw = False: [b'Setting up libqt5concurrent5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up fonts-opensymbol (4:102.12+LibO7.4.5-3) ...\r\n']
Raw = False: [b'Setting up libqt6dbus6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up libqt6concurrent6:amd64 (6.4.2+dfsg-10) ...\r\n']
Raw = False: [b'Setting up desktop-defaults-mx-xfce (23.06.01mx23) ...\r\n']
Raw = False: [b'desktop-defaults-mx-xfce-system was already set to manually installed.\r\ndesktop-defaults-mx-xfce-desktop was already set to manually installed.\r\nthunar-custom-actions-mx was already set to manually installed.\r\n']
Data_Split = [b'desktop-defaults-mx-xfce-system was already set to manually installed.', b'desktop-defaults-mx-xfce-desktop was already set to manually installed.', b'thunar-custom-actions-mx was already set to manually installed.', b'']
Raw = False: [b'Setting up libxfce4ui-2-0:amd64 (4.18.4-0.1~mx23+1) ...\r\n']
Raw = False: [b'Setting up samba-libs:amd64 (2:4.17.8+dfsg-2) ...\r\n']
Raw = False: [b'Setting up libsane1:amd64 (1.2.1-2) ...\r\n']
Raw = False: [b'Setting up libqt5network5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up libqt5sql5:amd64 (5.15.8+dfsg-11) ...\r\n']
Raw = False: [b'Setting up virtualbox-guest-x11 (7.0.8-dfsg-1~mx23+1) ...\r\n']
Raw = False: [b"\r\nConfiguration file '/etc/X11/Xsession.d/98vboxadd-xclient'\r\n ==> Modified (by you or by a script) since installation.\r\n ==> Package distributor has shipped an updated version.\r\n What would you like to do about it ? Your options are:\r\n Y or I : install the package maintainer's version"]
Raw = False: [b'\r\n N or O : keep your currently-installed version\r\n D : show the differences between the versions\r\n Z : start a shell to examine the situation\r\n The default action is to keep your current version.\r\n*** 98vboxadd-xclient (Y/I/N/O/D/Z) [default=N] ? ']
['Traceback (most recent call last):\n', ' File "/usr/lib/python3/dist-packages/nala/dpkg.py", line 465, in run_install\n os._exit(apt.do_install(self.write_stream.fileno())) # type: ignore[attr-defined]\n ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\n', 'apt_pkg.Error: E:Sub-process /usr/bin/dpkg returned an error code (1)\n']
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 8:59 am
by fehlix
MadMax wrote: ↑Sat Jun 10, 2023 8:25 am
@dolphin_oracle @fehlix Sure thing. Here's the full data from the first VM:
Code: Select all
2023-06-10 10:58:01 upgrade tzdata:all 2023c-4 2023c-5
MadMax wrote: ↑Sat Jun 10, 2023 8:30 am
And here we have the second one:
Code: Select all
2023-06-10 11:24:03 upgrade tzdata:all 2023c-4 2023c-5
In both case tzdata is involved. I found there is a conflict with network-settings.
In cases where I was able to reproduce the hanger it would wait/hang for about 3 minutes.
E.g Try to reproduce the hanger with apt, by reinstalling tzdata:
So in case apt would hang here also, it would explain why nala hangs.
+++EDIT+++ also I found papirus-icon-theme took ages to get installed in the used qemu VM's
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 9:40 am
by AK-47
gRegNfo wrote: ↑Sat Jun 10, 2023 7:51 am
Hi all,
I have installed the beta1, on btrfs (wich I think is the culprit)...and I have the following problem:
When I resume from suspend mode, it all seems fine after a few seconds of inactivity. But the wishker menu breaks and then the panel too.
I end up at a console window to login (after Alt+F4) and cant login, with some read errors from btrfs.
I have to do a cold shutdown and restart to get everything working.
I dont know about ext4 or other filesystem, but this one breaks.
Thanks!
What do you mean by "breaks" exactly? If you use an SSD, let's try editing the fstab and remove "discard=async" from all your btrfs mouns?
Anyone else reporting issues with BTRFS, please do the same. If removing discard=async from btrfs partitions fixes enough peoples' systems, it will be removed from the installer and it can be set manually.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 9:49 am
by dolphin_oracle
@fehlix these two bugs at nala's git repo may be related.
apt-listbugs and ncurses popups make Nala hang
Nala hangs before conffile question
for me the virtualbox conffile question is displaying, but maybe its not always...
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 12:17 pm
by fehlix
Yes, unfortunately, I cannot reproduce. The 211-nala issue and the provided fix,
appears related to "# Fix for Dialog Debconf Frontend
https://gitlab.com/volian/nala/-/issues/211"
The only thing, I can reproduce is the ntpsec -related hanger of about 3 minutes, b/c
ntpd is running but without a valid /run/ntpd.pid. Hence tzdata upgrade may trigger a restart of ntpsec,
and cannot stop w/o /run/ntpd.pid and finally hangs on start ntpsec for 180sec timeout.
The hanger can be re-produce, e.g. by disable/enable network, which fires up ntpd w/o pid.
Next re-start of ntpsec hangs: E.g with
sudo apt reinstall tzdata
One fix, may be the tzdata init script within the stop-close,
get's enhanced by something to populate /run/ntpd.pid with valid pid if ntpd is running
in order to make the stop work. Which would than avoid the ntpsec/ntpd hanger.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 12:37 pm
by gRegNfo
AK-47 wrote: ↑Sat Jun 10, 2023 9:40 am
gRegNfo wrote: ↑Sat Jun 10, 2023 7:51 am
Hi all,
I have installed the beta1, on btrfs (wich I think is the culprit)...and I have the following problem:
When I resume from suspend mode, it all seems fine after a few seconds of inactivity. But the wishker menu breaks and then the panel too.
I end up at a console window to login (after Alt+F4) and cant login, with some read errors from btrfs.
I have to do a cold shutdown and restart to get everything working.
I dont know about ext4 or other filesystem, but this one breaks.
Thanks!
What do you mean by "breaks" exactly? If you use an SSD, let's try editing the fstab and remove "discard=async" from all your btrfs mouns?
Anyone else reporting issues with BTRFS, please do the same. If removing discard=async from btrfs partitions fixes enough peoples' systems, it will be removed from the installer and it can be set manually.
I know I have not given much system info but I'll get back with specs.
I have SSD raid, but its a whole SSD to the machine though.
I use XFCE desktop.
After going out of suspend mode everything starts to malfunction, The menu bar first.
And on the console I got after Alt+F4 the issues with btrfs were verbosed.
I'll try what you mentioned and will come back!
Thanks a lot
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 5:30 pm
by slayd
I've tried both the 23 KDE and 23 XFCE.
When I install the distro, I get to a place in the reboot after successful install where it gives me 2 choices:
== enter root password
== Ctrl-D to continue
If I Ctrl-D, I will finally get to a log in screen for my new user. My user password will be accepted, but I'm returned to the log in screen to try again. I never get past the log in screen.
If I enter the root password when I get the choice during reboot, I will get the root prompt. If I check /etc/passwd, I see my new user is there. If I check to see the directories under /home, there are none. /home/my_new_user was never created during installation. So there is no desktop to load, etc.
I've tried this a few times. I've monitored the log during installation - nothing appears to be wrong
Has anyone else had this problem?
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 5:34 pm
by FullScale4Me
When trying to install Debian 64 bit 5.10 kernel the MXPI shows an already installed icon. See below. Replicated on a MX23 Beta 1 Live USB.
MX Boot Options disagrees with MXPI. See below
So I tried the MXPI Reinstall button. Show Details says 6.1.27.-1 Huh? See below.
Click OK gives MXPI log below. Notice we're back to 6.1.0-9 agreeing with MX Boot Options.
Please ignore the rtl8821ce stuff, a failed attempt at getting a free WiFi adapter working.
Code: Select all
2023-06-10 17:12:32.049 DBG default: mx-packageinstaller version: 23.6
2023-06-10 17:12:32.088 WRN default: QMetaObject::connectSlotsByName: Connecting slot on_comboRemote_activated() with the first of the following compatible signals: ("activated(int)", "activated(QString)")
2023-06-10 17:12:32.089 DBG default: +++ void MainWindow::setProgressDialog() +++
2023-06-10 17:12:32.089 DBG default: +++ void MainWindow::setup() +++
2023-06-10 17:12:32.091 DBG default: dpkg-query -f '${Version}' -W flatpak
2023-06-10 17:12:32.113 DBG default: "1.14.4-1"
2023-06-10 17:12:32.114 DBG default: apt-get update --print-uris | grep -m1 -qE '/mx/testrepo/dists/bookworm/test/'
2023-06-10 17:12:32.161 DBG default: +++ void MainWindow::loadPmFiles() +++
2023-06-10 17:12:32.276 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-06-10 17:12:32.276 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-06-10 17:12:32.276 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-06-10 17:12:32.304 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-06-10 17:23:51.939 DBG default: +++ void MainWindow::on_pushInstall_clicked() +++
2023-06-10 17:23:51.940 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-06-10 17:23:51.942 DBG default: +++ bool MainWindow::installPopularApps() +++
2023-06-10 17:23:52.330 DBG default: +++ bool MainWindow::updateApt() +++
2023-06-10 17:23:52.330 DBG default: apt-get update -o=Dpkg::Use-Pty=0 -o Acquire::http:Timeout=10 -o Acquire::https:Timeout=10 -o Acquire::ftp:Timeout=10
2023-06-10 17:23:52.513 DBG default: "Hit:1 http://deb.debian.org/debian bookworm InRelease"
2023-06-10 17:23:52.555 DBG default: "Hit:2 http://dl.google.com/linux/earth/deb stable InRelease"
2023-06-10 17:23:52.626 DBG default: "Hit:3 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease"
2023-06-10 17:23:52.627 DBG default: "Hit:4 https://dl.google.com/linux/chrome/deb stable InRelease"
2023-06-10 17:23:53.055 DBG default: "Hit:5 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease"
2023-06-10 17:23:53.422 DBG default: "Reading package lists..."
2023-06-10 17:23:54.358 DBG default: ""
2023-06-10 17:23:54.368 WRN default: "W: https://packagecloud.io/slacktechnologies/slack/debian/dists/jessie/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details."
2023-06-10 17:23:54.375 DBG default: sources updated OK
2023-06-10 17:23:54.375 DBG default: +++ bool MainWindow::installBatch(const QStringList&) +++
2023-06-10 17:23:54.375 DBG default: +++ bool MainWindow::install(const QString&) +++
2023-06-10 17:23:54.450 DBG default: +++ bool MainWindow::confirmActions(const QString&, const QString&) +++
2023-06-10 17:23:54.450 DBG default: names "linux-image-amd64 linux-headers-amd64 " and ()
2023-06-10 17:23:54.450 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) LANG=C apt-get -s -V -o=Dpkg::Use-Pty=0 install --reinstall linux-image-amd64 linux-headers-amd64 |grep 'Inst\|Remv'| awk '{V=""; P="";}; $3 ~ /^\[/ { V=$3 }; $3 ~ /^\(/ { P=$3 ")"}; $4 ~ /^\(/ {P=" => " $4 ")"}; {print $2 ";" V P ";" $1}'
2023-06-10 17:23:55.528 DBG default: "linux-headers-amd64;[6.1.27-1] => (6.1.27-1);Inst\nlinux-image-amd64;[6.1.27-1] => (6.1.27-1);Inst"
2023-06-10 17:23:55.529 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) LANG=C aptitude -sy -V -o=Dpkg::Use-Pty=0 install --without-recommends linux-image-amd64 linux-headers-amd64 |tail -2 |head -1
2023-06-10 17:23:56.333 DBG default: "Need to get 0 B of archives. After unpacking 0 B will be used."
2023-06-10 17:23:56.333 DBG default: detailed installed names sorted ("linux-headers-amd64;[6.1.27-1] => (6.1.27-1);Inst", "linux-image-amd64;[6.1.27-1] => (6.1.27-1);Inst")
2023-06-10 17:26:09.707 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) apt-get -o=Dpkg::Use-Pty=0 install -y --reinstall linux-image-amd64 linux-headers-amd64
2023-06-10 17:26:09.788 DBG default: "Reading package lists..."
2023-06-10 17:26:09.799 DBG default: ""
2023-06-10 17:26:09.806 DBG default: "Building dependency tree..."
2023-06-10 17:26:09.983 DBG default: "Reading state information..."
2023-06-10 17:26:09.985 DBG default: ""
2023-06-10 17:26:10.866 DBG default: "0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.\nNeed to get 0 B/2,888 B of archives.\nAfter this operation, 0 B of additional disk space will be used."
2023-06-10 17:26:11.732 DBG default: "(Reading database ... 331106 files and directories currently installed.)"
2023-06-10 17:26:11.751 DBG default: "Preparing to unpack .../linux-headers-amd64_6.1.27-1_amd64.deb ..."
2023-06-10 17:26:11.771 DBG default: "Unpacking linux-headers-amd64 (6.1.27-1) over (6.1.27-1) ..."
2023-06-10 17:26:11.859 DBG default: "Preparing to unpack .../linux-image-amd64_6.1.27-1_amd64.deb ..."
2023-06-10 17:26:11.875 DBG default: "Unpacking linux-image-amd64 (6.1.27-1) over (6.1.27-1) ..."
2023-06-10 17:26:11.979 DBG default: "Setting up linux-headers-amd64 (6.1.27-1) ..."
2023-06-10 17:26:11.989 DBG default: "Setting up linux-image-amd64 (6.1.27-1) ..."
2023-06-10 17:26:12.288 DBG default: Post-install
2023-06-10 17:26:12.288 DBG default: file=$(apt-cache show linux-image-amd64=4.19* |grep -m1 Depends)
file=${file#"Depends:"}
rebuild_dkms_packages.sh $file
2023-06-10 17:26:12.327 DBG default: "update dkms modules for kernel: 6.1.0-9-amd64"
2023-06-10 17:26:12.329 DBG default: "see log at /var/log/rebuild-dkms.log"
2023-06-10 17:26:12.333 DBG default: "dkms: running auto installation service for kernel 6.1.0-9-amd64."
2023-06-10 17:26:12.520 WRN default: "Deprecated feature: MODULES_CONF (/var/lib/dkms/rtl8821ce/5.5.2.1+git20221215/source/dkms.conf)"
2023-06-10 17:26:12.682 DBG default: "Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file\nSigning key: /var/lib/dkms/mok.key\nPublic certificate (MOK): /var/lib/dkms/mok.pub"
2023-06-10 17:26:12.982 DBG default: "Building module:"
2023-06-10 17:26:12.992 DBG default: "Cleaning build area..."
2023-06-10 17:26:13.056 DBG default: ""
2023-06-10 17:26:13.059 DBG default: "'make' all KVER=6.1.0-9-amd64..."
2023-06-10 17:26:16.062 DBG default: "."
2023-06-10 17:26:19.064 DBG default: "."
2023-06-10 17:26:22.065 DBG default: "."
2023-06-10 17:26:25.066 DBG default: "."
2023-06-10 17:26:28.068 DBG default: "."
2023-06-10 17:26:31.069 DBG default: "."
2023-06-10 17:26:32.996 DBG default: "(bad exit status: 2)"
2023-06-10 17:26:32.998 WRN default: "Error! Bad return status for module build on kernel: 6.1.0-9-amd64 (x86_64)\nConsult /var/lib/dkms/rtl8188fu/1.0/build/make.log for more information."
2023-06-10 17:26:33.000 WRN default: "Error! One or more modules failed to install during autoinstall.\nRefer to previous errors for more information."
2023-06-10 17:26:33.002 DBG default: "dkms: autoinstall for kernel: 6.1.0-9-amd64 failed!"
2023-06-10 17:26:33.004 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-06-10 17:26:33.005 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-06-10 17:26:33.005 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-06-10 17:26:33.034 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-06-10 17:26:40.211 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-06-10 17:26:40.212 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-06-10 17:26:40.212 DBG default: +++ void MainWindow::updateInterface() +++
2023-06-10 17:26:43.187 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 5:35 pm
by dolphin_oracle
slayd wrote: ↑Sat Jun 10, 2023 5:30 pm
I've tried both the 23 KDE and 23 XFCE.
When I install the distro, I get to a place in the reboot after successful install where it gives me 2 choices:
== enter root password
== Ctrl-D to continue
If I Ctrl-D, I will finally get to a log in screen for my new user. My user password will be accepted, but I'm returned to the log in screen to try again. I never get past the log in screen.
If I enter the root password when I get the choice during reboot, I will get the root prompt. If I check /etc/passwd, I see my new user is there. If I check to see the directories under /home, there are none. /home/my_new_user was never created during installation. So there is no desktop to load, etc.
I've tried this a few times. I've monitored the log during installation - nothing appears to be wrong
Has anyone else had this problem?
no but it sounds like your home folder is not in use or present.
do you have the /var/log/minstall.log file?
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 5:36 pm
by dolphin_oracle
FullScale4Me wrote: ↑Sat Jun 10, 2023 5:34 pm
When trying to install Debian 64 bit 5.10 kernel the MXPI shows an already installed icon. See below. Replicated on a MX23 Beta 1 Live USB.
MX Boot Options disagrees with MXPI. See below
So I tried the MXPI Reinstall button. Show Details says 6.1.27.-1 Huh? See below.
Click OK gives MXPI log below. Notice we're back to 6.1.0-9 agreeing with MX Boot Options.
Please ignore the rtl8821ce stuff, a failed attempt at getting a free WiFi adapter working.
Code: Select all
2023-06-10 17:12:32.049 DBG default: mx-packageinstaller version: 23.6
2023-06-10 17:12:32.088 WRN default: QMetaObject::connectSlotsByName: Connecting slot on_comboRemote_activated() with the first of the following compatible signals: ("activated(int)", "activated(QString)")
2023-06-10 17:12:32.089 DBG default: +++ void MainWindow::setProgressDialog() +++
2023-06-10 17:12:32.089 DBG default: +++ void MainWindow::setup() +++
2023-06-10 17:12:32.091 DBG default: dpkg-query -f '${Version}' -W flatpak
2023-06-10 17:12:32.113 DBG default: "1.14.4-1"
2023-06-10 17:12:32.114 DBG default: apt-get update --print-uris | grep -m1 -qE '/mx/testrepo/dists/bookworm/test/'
2023-06-10 17:12:32.161 DBG default: +++ void MainWindow::loadPmFiles() +++
2023-06-10 17:12:32.276 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-06-10 17:12:32.276 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-06-10 17:12:32.276 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-06-10 17:12:32.304 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-06-10 17:23:51.939 DBG default: +++ void MainWindow::on_pushInstall_clicked() +++
2023-06-10 17:23:51.940 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-06-10 17:23:51.942 DBG default: +++ bool MainWindow::installPopularApps() +++
2023-06-10 17:23:52.330 DBG default: +++ bool MainWindow::updateApt() +++
2023-06-10 17:23:52.330 DBG default: apt-get update -o=Dpkg::Use-Pty=0 -o Acquire::http:Timeout=10 -o Acquire::https:Timeout=10 -o Acquire::ftp:Timeout=10
2023-06-10 17:23:52.513 DBG default: "Hit:1 http://deb.debian.org/debian bookworm InRelease"
2023-06-10 17:23:52.555 DBG default: "Hit:2 http://dl.google.com/linux/earth/deb stable InRelease"
2023-06-10 17:23:52.626 DBG default: "Hit:3 http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo bookworm InRelease"
2023-06-10 17:23:52.627 DBG default: "Hit:4 https://dl.google.com/linux/chrome/deb stable InRelease"
2023-06-10 17:23:53.055 DBG default: "Hit:5 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease"
2023-06-10 17:23:53.422 DBG default: "Reading package lists..."
2023-06-10 17:23:54.358 DBG default: ""
2023-06-10 17:23:54.368 WRN default: "W: https://packagecloud.io/slacktechnologies/slack/debian/dists/jessie/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details."
2023-06-10 17:23:54.375 DBG default: sources updated OK
2023-06-10 17:23:54.375 DBG default: +++ bool MainWindow::installBatch(const QStringList&) +++
2023-06-10 17:23:54.375 DBG default: +++ bool MainWindow::install(const QString&) +++
2023-06-10 17:23:54.450 DBG default: +++ bool MainWindow::confirmActions(const QString&, const QString&) +++
2023-06-10 17:23:54.450 DBG default: names "linux-image-amd64 linux-headers-amd64 " and ()
2023-06-10 17:23:54.450 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) LANG=C apt-get -s -V -o=Dpkg::Use-Pty=0 install --reinstall linux-image-amd64 linux-headers-amd64 |grep 'Inst\|Remv'| awk '{V=""; P="";}; $3 ~ /^\[/ { V=$3 }; $3 ~ /^\(/ { P=$3 ")"}; $4 ~ /^\(/ {P=" => " $4 ")"}; {print $2 ";" V P ";" $1}'
2023-06-10 17:23:55.528 DBG default: "linux-headers-amd64;[6.1.27-1] => (6.1.27-1);Inst\nlinux-image-amd64;[6.1.27-1] => (6.1.27-1);Inst"
2023-06-10 17:23:55.529 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) LANG=C aptitude -sy -V -o=Dpkg::Use-Pty=0 install --without-recommends linux-image-amd64 linux-headers-amd64 |tail -2 |head -1
2023-06-10 17:23:56.333 DBG default: "Need to get 0 B of archives. After unpacking 0 B will be used."
2023-06-10 17:23:56.333 DBG default: detailed installed names sorted ("linux-headers-amd64;[6.1.27-1] => (6.1.27-1);Inst", "linux-image-amd64;[6.1.27-1] => (6.1.27-1);Inst")
2023-06-10 17:26:09.707 DBG default: DEBIAN_FRONTEND=$(dpkg -l debconf-kde-helper 2>/dev/null | grep -sq ^i && echo kde || echo gnome) apt-get -o=Dpkg::Use-Pty=0 install -y --reinstall linux-image-amd64 linux-headers-amd64
2023-06-10 17:26:09.788 DBG default: "Reading package lists..."
2023-06-10 17:26:09.799 DBG default: ""
2023-06-10 17:26:09.806 DBG default: "Building dependency tree..."
2023-06-10 17:26:09.983 DBG default: "Reading state information..."
2023-06-10 17:26:09.985 DBG default: ""
2023-06-10 17:26:10.866 DBG default: "0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded.\nNeed to get 0 B/2,888 B of archives.\nAfter this operation, 0 B of additional disk space will be used."
2023-06-10 17:26:11.732 DBG default: "(Reading database ... 331106 files and directories currently installed.)"
2023-06-10 17:26:11.751 DBG default: "Preparing to unpack .../linux-headers-amd64_6.1.27-1_amd64.deb ..."
2023-06-10 17:26:11.771 DBG default: "Unpacking linux-headers-amd64 (6.1.27-1) over (6.1.27-1) ..."
2023-06-10 17:26:11.859 DBG default: "Preparing to unpack .../linux-image-amd64_6.1.27-1_amd64.deb ..."
2023-06-10 17:26:11.875 DBG default: "Unpacking linux-image-amd64 (6.1.27-1) over (6.1.27-1) ..."
2023-06-10 17:26:11.979 DBG default: "Setting up linux-headers-amd64 (6.1.27-1) ..."
2023-06-10 17:26:11.989 DBG default: "Setting up linux-image-amd64 (6.1.27-1) ..."
2023-06-10 17:26:12.288 DBG default: Post-install
2023-06-10 17:26:12.288 DBG default: file=$(apt-cache show linux-image-amd64=4.19* |grep -m1 Depends)
file=${file#"Depends:"}
rebuild_dkms_packages.sh $file
2023-06-10 17:26:12.327 DBG default: "update dkms modules for kernel: 6.1.0-9-amd64"
2023-06-10 17:26:12.329 DBG default: "see log at /var/log/rebuild-dkms.log"
2023-06-10 17:26:12.333 DBG default: "dkms: running auto installation service for kernel 6.1.0-9-amd64."
2023-06-10 17:26:12.520 WRN default: "Deprecated feature: MODULES_CONF (/var/lib/dkms/rtl8821ce/5.5.2.1+git20221215/source/dkms.conf)"
2023-06-10 17:26:12.682 DBG default: "Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file\nSigning key: /var/lib/dkms/mok.key\nPublic certificate (MOK): /var/lib/dkms/mok.pub"
2023-06-10 17:26:12.982 DBG default: "Building module:"
2023-06-10 17:26:12.992 DBG default: "Cleaning build area..."
2023-06-10 17:26:13.056 DBG default: ""
2023-06-10 17:26:13.059 DBG default: "'make' all KVER=6.1.0-9-amd64..."
2023-06-10 17:26:16.062 DBG default: "."
2023-06-10 17:26:19.064 DBG default: "."
2023-06-10 17:26:22.065 DBG default: "."
2023-06-10 17:26:25.066 DBG default: "."
2023-06-10 17:26:28.068 DBG default: "."
2023-06-10 17:26:31.069 DBG default: "."
2023-06-10 17:26:32.996 DBG default: "(bad exit status: 2)"
2023-06-10 17:26:32.998 WRN default: "Error! Bad return status for module build on kernel: 6.1.0-9-amd64 (x86_64)\nConsult /var/lib/dkms/rtl8188fu/1.0/build/make.log for more information."
2023-06-10 17:26:33.000 WRN default: "Error! One or more modules failed to install during autoinstall.\nRefer to previous errors for more information."
2023-06-10 17:26:33.002 DBG default: "dkms: autoinstall for kernel: 6.1.0-9-amd64 failed!"
2023-06-10 17:26:33.004 DBG default: +++ void MainWindow::refreshPopularApps() +++
2023-06-10 17:26:33.005 DBG default: +++ QStringList MainWindow::listInstalled() +++
2023-06-10 17:26:33.005 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2023-06-10 17:26:33.034 DBG default: +++ void MainWindow::displayPopularApps() const +++
2023-06-10 17:26:40.211 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
2023-06-10 17:26:40.212 DBG default: +++ void MainWindow::setCurrentTree() +++
2023-06-10 17:26:40.212 DBG default: +++ void MainWindow::updateInterface() +++
2023-06-10 17:26:43.187 DBG default: +++ void MainWindow::on_tabWidget_currentChanged(int) +++
thank you. the 5.10 is just a label. that entry is supposed to install the latest debian stable kernel, which is installed.
Re: MX-23 beta 1 feedback thread
Posted: Sat Jun 10, 2023 11:12 pm
by Shifu
I installed it a week ago on a separate partition and it's running fine. Very good. Flawless. I haven't booted back into my MX21 partition since.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Dell product: Latitude E6410 v: 0001 serial: <superuser required> Chassis:
type: 9 serial: <superuser required>
Mobo: Dell model: 07XJP9 v: A01 serial: <superuser required> BIOS: Dell v: A05 date: 08/10/2010
Battery:
ID-1: BAT0 charge: 0% condition: 34.4/48.8 Wh (70.4%) volts: 2.8 min: 11.1 model: Samsung SDI
DELL PT43699 type: Li-ion serial: <filter> status: charging
CPU:
Info: model: Intel Core i5 M 540 bits: 64 type: MT MCP arch: Westmere gen: core 1 level: v2
built: 2010-11 process: Intel 32nm family: 6 model-id: 0x25 (37) stepping: 5 microcode: 0x7
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1596 min/max: 1199/2534 boost: enabled scaling: driver: acpi-cpufreq
governor: ondemand cores: 1: 1596 2: 1596 3: 1596 4: 1596 bogomips: 20215
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GT218M [NVS 3100M] vendor: Dell driver: nouveau v: kernel non-free:
series: 340.xx status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla
process: 40-80nm built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports:
active: VGA-1,eDP-1 empty: DP-1,DP-2 bus-ID: 01:00.0 chip-ID: 10de:0a6c class-ID: 0300
temp: 72.0 C
Device-2: Ricoh HD Webcam type: USB driver: uvcvideo bus-ID: 1-1.4:5 chip-ID: 05ca:1814
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2720x1024 s-dpi: 96 s-size: 719x270mm (28.31x10.63") s-diag: 768mm (30.24")
Monitor-1: VGA-1 pos: primary,right model: LG (GoldStar) L1919S serial: <filter> built: 2006
res: 1280x1024 hz: 60 dpi: 86 gamma: 1.2 size: 376x301mm (14.8x11.85") diag: 482mm (19")
ratio: 5:4 modes: max: 1280x1024 min: 720x400
Monitor-2: eDP-1 pos: left model: AU Optronics 0x4147 built: 2009 res: 1440x900 hz: 60 dpi: 121
gamma: 1.2 size: 303x189mm (11.93x7.44") diag: 357mm (14.1") ratio: 16:10 modes: max: 1440x900
min: 800x600
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: NVA8 direct-render: Yes
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell Latitude E6410
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403
Device-2: NVIDIA High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0be3 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82577LM Gigabit Network vendor: Dell Latitude E6410 driver: e1000e v: kernel
port: 8040 bus-ID: 00:19.0 chip-ID: 8086:10ea class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:422b class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Dell DW375 Bluetooth Module type: USB driver: btusb v: 0.8 bus-ID: 2-1.7:5
chip-ID: 413c:8187 class-ID: fe01 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.0 lmp-v: 3.0
sub-v: 4203 hci-v: 3.0 rev: 205
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 port: 8020
bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
Local Storage: total: 932.46 GiB used: 421.73 GiB (45.2%)
ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD01G size: 968.8 MiB block-size:
physical: 512 B logical: 512 B type: SSD serial: <filter>
SMART Message: Unknown smartctl error. Unable to generate data.
SMART Message: Unable to run smartctl. Root privileges required.
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: MBR
Partition:
ID-1: / raw-size: 59.1 GiB size: 57.88 GiB (97.92%) used: 14.79 GiB (25.5%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 1.52 GiB (50.8%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A sodimm: SODIMM C gpu: nouveau temp: 72.0 C
Fan Speeds (RPM): cpu: 3312
Repos:
Packages: 2274 pm: dpkg pkgs: 2269 libs: 1247 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 5
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 240 Uptime: 6d 4h 22m wakeups: 11112 Memory: 7.74 GiB used: 5.86 GiB (75.6%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 1:15 am
by zebedeeboss
Hi,
Not sure if this is a Beta problem or a generic Debian one.
I have an AMD Ryzen™ Threadripper 2950X, TR4, Zen+, 16 Core, 32 Thread, 3.5GHz, 4.4GHz Turbo, 32MB Cache, 64 Lanes, where as the MX Welcome Screen / About reports 8 core (seen below the ls one) with QSI below that also reporting 8 core.
lscpu reports
Code: Select all
zebedee@mx23-2950x-rtx4070:~
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 43 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Vendor ID: AuthenticAMD
Model name: AMD Ryzen Threadripper 2950X 16-Core Processor
CPU family: 23
Model: 8
Thread(s) per core: 2
Core(s) per socket: 16
Socket(s): 1
Stepping: 2
Frequency boost: disabled
CPU(s) scaling MHz: 53%
CPU max MHz: 4000.0000
CPU min MHz: 2200.0000
MX Welcome Screen - about section
Code: Select all
CPU: 8-core AMD Ryzen Threadripper 2950X (-MT MCP MCM-) speed/min/max: 2185/2200/4000 MHz
Kernel: 6.1.0-9-amd64 x86_64 Up: 21m Mem: 2111.4/64144.2 MiB (3.3%) Storage: 5.46 TiB (24.8% used)
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: PC Specialist product: Amd X399 Overclocked v: N/A
serial: <superuser required>
Mobo: ASUSTeK model: PRIME X399-A v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 1203 date: 10/09/2019
CPU:
Info: model: AMD Ryzen Threadripper 2950X bits: 64 type: MT MCP MCM arch: Zen+ gen: 2 level: v3
note: check built: 2018-21 process: GF 12nm family: 0x17 (23) model-id: 8 stepping: 2
microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 4 threads: 32 dies: 2 smt: enabled cache: L1: 1.5 MiB
desc: d-16x32 KiB; i-16x64 KiB L2: 8 MiB desc: 16x512 KiB L3: 32 MiB desc: 4x8 MiB
Speed (MHz): avg: 2181 high: 2250 min/max: 2200/4000 boost: disabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2250 3: 2200 4: 2250 5: 2200 6: 2250
7: 2200 8: 2200 9: 1928 10: 2250 11: 2250 12: 2250 13: 2197 14: 2200 15: 2197 16: 2200 17: 2250
18: 2250 19: 1685 20: 2250 21: 2200 22: 2200 23: 2200 24: 2133 25: 1928 26: 2250 27: 2250
28: 2200 29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 255970
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: N/A status: unknown device ID pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 42:00.0 chip-ID: 10de:2786 class-ID: 0300
Device-2: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-4:4
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 7680x2160 s-dpi: 54 s-size: 3612x512mm (142.20x20.16")
s-diag: 3648mm (143.63")
Monitor-1: DP-0 pos: primary,left res: 3840x2160 dpi: 82 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
Monitor-2: DP-2 pos: right res: 3840x2160 dpi: 82 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA Graphics Device/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 5-2:2
chip-ID: 0951:16ad pcie: class-ID: 0300 gen: 3 serial: <filter> speed: 8 GT/s lanes: 16
bus-ID: 0c:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 42:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: Kingston HyperX Cloud Revolver S type: USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-4:4
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 05:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth1 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: 1000 bus-ID: 0a:00.0 chip-ID: 10ec:8161 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 5.46 TiB used: 1.36 TiB (24.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 43.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: SBM02103 temp: 34.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1 size: 1.82 TiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q
scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
scheme: GPT
Partition:
ID-1: / raw-size: 931.25 GiB size: 915.56 GiB (98.31%) used: 152.36 GiB (16.6%) fs: ext4
dev: /dev/sdc2 maj-min: 8:34
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sdc1 maj-min: 8:33
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 44.0 C mobo: 33.0 C gpu: nvidia temp: 47 C
Fan Speeds (RPM): cpu: 1030 case-1: 0 case-2: 0 case-3: 0 gpu: nvidia fan: 0%
Power: 12v: 12.03 5v: N/A 3.3v: N/A vbat: 3.14
Repos:
Packages: pm: dpkg pkgs: 2463 libs: 1364 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 496 Uptime: 27m wakeups: 0 Memory: 62.64 GiB used: 2.91 GiB (4.6%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Not sure it matters really. I just happened to notice.
Regards Zeb...
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 3:49 am
by MadMax
I can confirm the 3 minute waiting time for tzdata. Maybe I should have been a little more patient in that case.
Albeit this problem apparently is a thing, too, since the first time it showed the conffile question and the second time it did hang right where the question was supposed to pop up.
While nala is great, I'm leaning a little towards using pure apt in a terminal once I make the switch to MX 23. The nicer GUI for me isn't worth risking a broken update
(that said, both VMs run fine and apt shows no errors even after Ctrl+CCing nala)
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 7:12 am
by i_ri
Code: Select all
#!
## idesk svg icon swap red and blue channels, put result in appsidesk directory.
## adapt to your destination directory.
export DIALOG=$(cat <<End_of_Text
<window title="convert to idesk svg" icon-name="gtk-convert" window-position="1">
<vbox>
<hbox>
<vbox>
<frame icon path >
<combobox>
<item>""</item>
<variable>TOIDESKSVG</variable>
</combobox>
</frame>
</vbox>
</hbox>
<frame alt+o >
<button ok></button>
</frame>
</vbox>
</window>
End_of_Text
)
I=$IFS; IFS=""
for STATEMENTS in $(gtkdialog --program DIALOG); do
eval "$STATEMENTS"
done
IFS=$I
if [ "$EXIT" = "OK" ] ; then
TOIDESKAPPS=$(basename "${TOIDESKSVG}idesk.svg")
lazpaint ${TOIDESKSVG} -swapredblue /usr/share/icons/Papirus/48x48/appsidesk/${TOIDESKAPPS} &
else
exit
fi
hello dolphin_oracle
rgb->bgr svg idesk svg
Hello Melber
install lazpaint.
A lazpaint way to create interim svg idesk icons.
sample script swaps red and blue, then saves to a appsidesk directory (sample uses /usr/share/icons/Papirus/48x48/appsidesk/);
root terminal run script; paste into the entrytextbox the path to your favorite icon; any icon png or svg Type, the script converts to svg.
Carry on
Using lazpaint the other direction to convert Papirus svg to png, then there is no Transparency problem. That is back to the way previous to idesk make use of svg. Using lazpaint for that is lazpaint plus in and out filenames.
<lazpaint /full/filename/input.svg /full/filename/output.png>
command will convert svg to output.png.
Take a screenshot <lazpaint -screenhsot 0>
lazydayplaylazpaintidesk
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 7:30 am
by fehlix
MadMax wrote: ↑Sun Jun 11, 2023 3:49 am
I can confirm the 3 minute waiting time for tzdata. Maybe I should have been a little more patient in that case.
Albeit this problem apparently is a thing, too, since the first time it showed the conffile question and the second time it did hang right where the question was supposed to pop up.
While nala is great, I'm leaning a little towards using pure apt in a terminal once I make the switch to MX 23. The nicer GUI for me isn't worth risking a broken update
(that said, both VMs run fine and apt shows no errors even after Ctrl+CCing nala)
Due to reports by some user about "nala hangs" within "MX Updater", we will revert to apt within "MX Updater".
User are still encouraged to manually enable nala within ~/.config/MX-Linux/apt-notifier.conf
and provide detailed report in case of any hanger.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:04 am
by Melber
i_ri wrote: ↑Sun Jun 11, 2023 7:12 am
Code: Select all
#!
## idesk svg icon swap red and blue channels, put result in appsidesk directory.
## adapt to your destination directory.
export DIALOG=$(cat <<End_of_Text
<window title="convert to idesk svg" icon-name="gtk-convert" window-position="1">
<vbox>
<hbox>
<vbox>
<frame icon path >
<combobox>
<item>""</item>
<variable>TOIDESKSVG</variable>
</combobox>
</frame>
</vbox>
</hbox>
<frame alt+o >
<button ok></button>
</frame>
</vbox>
</window>
End_of_Text
)
I=$IFS; IFS=""
for STATEMENTS in $(gtkdialog --program DIALOG); do
eval "$STATEMENTS"
done
IFS=$I
if [ "$EXIT" = "OK" ] ; then
TOIDESKAPPS=$(basename "${TOIDESKSVG}idesk.svg")
lazpaint ${TOIDESKSVG} -swapredblue /usr/share/icons/Papirus/48x48/appsidesk/${TOIDESKAPPS} &
else
exit
fi
hello dolphin_oracle
rgb->bgr svg idesk svg
Hello Melber
install lazpaint.
A lazpaint way to create interim svg idesk icons.
sample script swaps red and blue, then saves to a appsidesk directory (sample uses /usr/share/icons/Papirus/48x48/appsidesk/);
root terminal run script; paste into the entrytextbox the path to your favorite icon; any icon png or svg Type, the script converts to svg.
Carry on
Using lazpaint the other direction to convert Papirus svg to png, then there is no Transparency problem. That is back to the way previous to idesk make use of svg. Using lazpaint for that is lazpaint plus in and out filenames.
<lazpaint /full/filename/input.svg /full/filename/output.png>
command will convert svg to output.png.
Take a screenshot <lazpaint -screenhsot 0>
lazydayplaylazpaintidesk
@i_ri @Jerry3904
I don't think it's just the red and blue channels, all colours are getting shifted and not just inverted.
It seems idesk just can't render svgs properly.
Could we build a check into mx-idesktools and if the selcted icon is an svg, save a png copy to ~/.idesktools/icons and use that png icon instead? Svg>png conversion could be done with rsvg rather than needing to install lazpaint.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:12 am
by Jerry3904
That's a thought. I'd like to hear from
@Stevo before we take any such steps. Maybe we should also take a look at the forums of
the few other distros (maybe especially Gentoo) listed by Repology as having 0.7.8 available.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:16 am
by dolphin_oracle
after adjusting the transparency in .ideskrc to 0, i find colors are OK but it appears to me that the transparent parts of svg icons are rendered black.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:24 am
by Jerry3904
Here's the Gentoo ebuild where the svg inclusion is indicated:
Code: Select all
# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
inherit autotools
DESCRIPTION="Utility to place icons on the root window"
HOMEPAGE="https://github.com/neagix/idesk"
SRC_URI="https://github.com/neagix/idesk/archive/refs/tags/v${PV}.tar.gz -> ${P}.tar.gz"
LICENSE="BSD"
SLOT="0"
KEYWORDS="~alpha amd64 ~hppa ppc ppc64 sparc x86"
IUSE="svg"
RDEPEND="
dev-libs/glib
dev-libs/libxml2
media-libs/freetype
media-libs/imlib2[X]
media-libs/libart_lgpl
x11-libs/libXft
x11-libs/gtk+:3
x11-libs/pango
x11-libs/startup-notification
svg? (
gnome-base/librsvg
x11-libs/gdk-pixbuf
)
"
DEPEND="${RDEPEND}"
BDEPEND="virtual/pkgconfig"
PATCHES=(
"${FILESDIR}"/${PN}-0.7.8-use-pkg-config-imlib2.patch
)
src_prepare() {
default
sed -i -e 's,/usr/local/,/usr/,' examples/default.lnk || die
eautoreconf
}
src_configure() {
econf \
--enable-libsn \
$(use_enable svg)
}
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:59 am
by i_ri
hello dolphin_oracle
idesk equal time for idesk png
A lazpaint way to convert svg to png in this script; saves to a appsideskp directory (this sample uses /usr/share/idesk/appsideskp/)
root terminal run script; paste into the entrytextbox the path to your favorite svg icon; ok.
Backup method two with this sample
you do a rsvg sample suggest are there plentiful ways to png(?) and i learn your sample to incorporate temporarily within idesktool for convert to png? show your preferred destination directory for idesk.png. i do not think that idesktool should handle it.
Code: Select all
#!
## idesk png, put result in appsideskp directory.
## You create /usr/share/idesk/appsideskp/
## adapt to your destination directory.
export DIALOG=$(cat <<End_of_Text
<window title="appsideskp png idesk " icon-name="gtk-convert" window-position="1">
<vbox>
<hbox>
<vbox>
<frame icon path >
<combobox>
<item>""</item>
<variable>TOIDESKPNG</variable>
</combobox>
</frame>
</vbox>
</hbox>
<frame alt+o >
<button ok></button>
</frame>
</vbox>
</window>
End_of_Text
)
I=$IFS; IFS=""
for STATEMENTS in $(gtkdialog --program DIALOG); do
eval "$STATEMENTS"
done
IFS=$I
if [ "$EXIT" = "OK" ] ; then
TOIDESKAPPSP=$(basename "${TOIDESKPNG}idesk.png")
lazpaint ${TOIDESKPNG} /usr/share/idesk/appsideskp/${TOIDESKAPPSP} &
else
exit
fi
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 10:04 am
by Melber
dolphin_oracle wrote: ↑Sun Jun 11, 2023 9:16 am
after adjusting the transparency in .ideskrc to 0, i find colors are OK but it appears to me that the transparent parts of svg icons are rendered black.
doesn't work for me
quickshot_230611_160137.png
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 1:18 pm
by i_ri
gui
svg to png using nomacs
sudo nomacs >File >Open >name.svg >Open
>File >SaveAs >48x48 /destination/appsideskp/nameidesk.png >Save
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 1:25 pm
by dolphin_oracle
Melber wrote: ↑Sun Jun 11, 2023 10:04 am
dolphin_oracle wrote: ↑Sun Jun 11, 2023 9:16 am
after adjusting the transparency in .ideskrc to 0, i find colors are OK but it appears to me that the transparent parts of svg icons are rendered black.
doesn't work for mequickshot_230611_160137.png
I see now. I was testing with some different papirus icons. 3dchess and 7zip were fine color wise.
i_ri thinks maybe the red and blue channels are reversed in some icons. I don't know enough about it to be able to say.
you could possibly convert svg's to png's on the fly and stash them in /home somewhere, maybe even in the .idesktop folder with the link files. if librsvg2-bin is installed, then this will work on the fly
using mx-packageinstaller.svg and a 48x48 size
Code: Select all
rsvg-convert -w 48 -h 48 /usr/share/icons/Papirus/48x48/apps/mx-packageinstaller.svg -o ~/mx-packageinstaller.png
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 1:33 pm
by Melber
dolphin_oracle wrote: ↑Sun Jun 11, 2023 1:25 pm
Melber wrote: ↑Sun Jun 11, 2023 10:04 am
dolphin_oracle wrote: ↑Sun Jun 11, 2023 9:16 am
after adjusting the transparency in .ideskrc to 0, i find colors are OK but it appears to me that the transparent parts of svg icons are rendered black.
doesn't work for mequickshot_230611_160137.png
I see now. I was testing with some different papirus icons. 3dchess and 7zip were fine color wise.
i_ri thinks maybe the red and blue channels are reversed in some icons. I don't know enough about it to be able to say.
you could possibly convert svg's to png's on the fly and stash them in /home somewhere, maybe even in the .idesktop folder with the link files. if librsvg2-bin is installed, then this will work on the fly
using mx-packageinstaller.svg and a 48x48 size
Code: Select all
rsvg-convert -w 48 -h 48 /usr/share/icons/Papirus/48x48/apps/mx-packageinstaller.svg -o ~/mx-packageinstaller.png
That was kinda my plan. Thanks for the code snippet.
Melber wrote: ↑Sun Jun 11, 2023 9:04 am
@i_ri @Jerry3904
I don't think it's just the red and blue channels, all colours are getting shifted and not just inverted.
It seems idesk just can't render svgs properly.
Could we build a check into mx-idesktools and if the selcted icon is an svg, save a png copy to ~/.idesktools/icons and use that png icon instead? Svg>png conversion could be done with rsvg rather than needing to install lazpaint.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 2:41 pm
by Jerry3904
Good ideas, people. I would think the appropriate place to put them would be
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 4:24 pm
by entropyfoe
I have to agree Shifu
#405 Post by Shifu » Sat Jun 10, 2023 11:12 pm
I installed it a week ago on a separate partition and it's running fine. Very good. Flawless. I haven't booted back into my MX21 partition since.
Same here, > 11 days uptime, no crash, no lock-ups. One reboot for bench marking. Taking all synaptic upgrades. Stable in light loads and heavy (Ryzens used to have trouble in idle modes in the bad old days), suspending and waking quickly without issues. Heavy, meaning 10 threads 100% with stockfish. Importing and working with > GB databases, many 100's of GB of data backups and file transfer...Firefox with many windows and hundreds of tabs. All smooth and fast. This is a great beta. Thanks !
For bench-marking, recall this is the same hardware, as with Shifu, just a different partition, on the same drive as MX 21.3 root. So scores on the MX system profiler and bench marking tool are comparable.
I ran twice each on separate days with reboots.]
Test MX 23 beta 1 MX 21.3 units
CPU Blowfish 0.47, 0.47 0.55, 0.47 s=seconds
Cryptohash 5176, 5427 5339, 5556 MB/sec
Fibonacci 0.29, 0.29 0.29, 0.30 s
N Queens 4.64, 4.84 4.62, 4.65 s
CPU zlib 2.57, 2.55 2.92, 2.69 (Highmarks, higher is better, but this seems wrong, as the PowerPC has a very high number?!?!?!)
fft 0.70, 0.71 0.71, 0.70 s
FPU ray tracing 4.04, 4.02 4.20, 4.24 s
So, MX 23 beta1 looks comparable, though the Cryptohash may be lower a bit maybe,needs more sample size to gauge variability. Same for N Queens.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 5:40 pm
by Melber
back to idesk...In case we can't get svg icons working.
I added an svg check to the
geticon function in mx-idesktool.
If the selected icon is an svg a png copy is placed in ~/.icons/idesk and gets used by idesk.
Code: Select all
geticon()
{
if [ "$comefrom" = "modif" ]; then
iconplaceholder="${currenticon}"
else
iconplaceholder="${icondir}"
fi
#echo "current icon is " "${iconplaceholder}"
cd "${iconplaceholder%/*}"
icon="$($DIALOG --title="Commands" \
--width=600 --height=500 --center \
--button="$TEXT7":3 --button="$TEXT8":1 \
--button="$TEXT9":0 --title "$TEXT23" \
--text="$TEXT19": \
--file-selection="${iconplaceholder}" \
--file-filter="png, svg | *.png *.PNG *.svg *.xpm" \
--filename="${iconplaceholder}")"
retval=$?
icon="$(echo "${icon}" | cut -d '|' -f 2)"
if [[ $icon == *.svg ]]; then
if [ ! -d ~/.icons/idesk ]; then
mkdir ~/.icons/idesk
fi
icon_pngname="$(basename "${icon}" | sed -e "s/\.svg/\.png/")"
icon_pngname=~/.icons/idesk/$icon_pngname
rsvg-convert -w 48 -h 48 $icon -o $icon_pngname
icon=$icon_pngname
fi
case ${retval} in
0) iconvalidate
;;
3) if [ "${comefrom}" = "modif" ]; then
modifycommands
else
newcommands
fi
;;
*) argynope
;;
esac
}
Creating new icons and editing existing icons works okay for me.
quickshot_230611_233522.png
Script attached if someone wants to test. (the
geticon function starts at line 495 if you're looking for it)
You'll need to install
librsvg2-bin first, it's not installed by default.
idesktest.tar.gz
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 5:49 pm
by Jerry3904
Excellent, nice to have an exit strategy. Thanks for the suggestion @i_ri.
Btw, Stevo says he did all that stuff so this is the way we're headed now. Will test tonight.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 9:24 pm
by Jerry3904
Script did not work for me. First I had to change l. 551 to get rid of an error:
Then I ran it again, identified the icon, program said it was reloading and then no icon on the desktop--in spite of the fact that the folders were created and the icon in png format was placed inside. Tried that twice, same result. Too late to track down the error tonight.
Re: MX-23 beta 1 feedback thread
Posted: Sun Jun 11, 2023 10:01 pm
by dolphin_oracle
Jerry3904 wrote: ↑Sun Jun 11, 2023 9:24 pm
Script did not work for me. First I had to change l. 551 to get rid of an error:
Then I ran it again, identified the icon, program said it was reloading and then no icon on the desktop--in spite of the fact that the folders were created and the icon in png format was placed inside. Tried that twice, same result. Too late to track down the error tonight.
@Melber
except for adding the -p to the mkdir command, seems to be OK. will play around and try to break it.
I find the icons are being created one overtop of the other. so making a new icon sometimes comes under an existing one. seems like new icons all show up a 400 x 500. that's probably an existing bug that's never been noticed before. you can see the overlap in the attached screenshot and a second shot that shows them seperated. "fred2" was created under "fred"
might also be nice if the size was from the icon or icon's folder rather than always 48.
Re: MX-23 beta 1 feedback thread LAMP Install Issues with SOLUTION
Posted: Mon Jun 12, 2023 2:15 am
by asher
Hi I have been checking out MX 23 Beta on a Virtual Machine GREAT JOB!!!!
When installing a LAMP server.
When doing a search it came up with this page:
https://mxlinux.org/wiki/networking/lamp-setup/
however the New Apache set up is much different than the last one.
So I created an up today way of setting up Apache and MariaDB(mostly the same, some changes)
I am not sure how to use gufw(Firewall Configuration) that well. So my instructions are cli with ufw.
I created the file in a .odt LibreOffice Writer. If you want it in another format just let me know.
Can we have a collaboration for this help file?
https://htmlpreview.github.io/?https:// ... nMX23.html
To download the original .odt file go to:
https://github.com/Asher-Simcha/updatePage
The old page is at:
https://mxlinux.org/wiki/networking/lamp-setup/
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 2:18 am
by asher
Installed XFCE BETA 23
Installing kate AND clicking on Also Install “Recommended” Packages.
When installing kate the terminal emulator does not WORK.
In the package could you please also include the terminal emulator. The package is konsole, in general this is the default terminal for KDE I believe but I installed XFCE and then kate.
PS The reason that I bring this up is that it took me weeks as a noob just to get the terminal to work with kate.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 2:35 am
by i_ri
hello dolphin_oracle
mx-idesktool substitute
Stores a png in home and uses the png for idesk icon.
accepts svg, xpm, png.
uses <libimlib2-dev>
i forgot to consider it not default..
Re: MX-23 beta 1 feedback thread LAMP Install Issues with SOLUTION
Posted: Mon Jun 12, 2023 6:20 am
by Jerry3904
That is really helpful, thanks! We will definitely be making use of that draft to revise the Wiki page in the near future.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 7:54 am
by Jerry3904
i_ri wrote: ↑Mon Jun 12, 2023 2:35 am
hello dolphin_oracle
mx-idesktool substitute
Stores a png in home and uses the png for idesk icon.
accepts svg, xpm, png.
uses <libimlib2-dev>
i forgot to consider it not default..
How does this relate to
@Melber's posted script above that we're currently testing?
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 7:56 am
by Jerry3904
Jerry3904 wrote: ↑Sun Jun 11, 2023 9:24 pm
Script did not work for me. First I had to change l. 551 to get rid of an error:
Then I ran it again, identified the icon, program said it was reloading and then no icon on the desktop--in spite of the fact that the folders were created and the icon in png format was placed inside. Tried that twice, same result. Too late to track down the error tonight.
Now by the light of day and switching user accounts--works fine! I'm going to upload that for packaging tomorrow for the b2 build.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 10:21 am
by siamhie
@Jerry3904 MX-23 fluxbox menu suggestion
Is it possible to move Window Options from Extras and into Appearance as it's own sub-category?
(Currently in MX-21 Border and Titlebar are listed under Appearance > Style)
window_options.png
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 11:04 am
by Jerry3904
It's certainly possible, thanks. But IMO this is the better way to treat them because they are so unique and rarely used.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 11:07 am
by dolphin_oracle
@zebedeeboss the latest ddm-mx utility should ask if the user wants to try "nvidia-driver" if a part is not found any in PCIID lists.
The user will be informed the part wasn’t found then offered to install nvidia-driver anyway.
Re: MX-23 beta 1 feedback thread
Posted: Mon Jun 12, 2023 12:29 pm
by siamhie
Jerry3904 wrote: ↑Mon Jun 12, 2023 11:04 am
It's certainly possible, thanks. But IMO this is the better way to treat them because they are so unique and rarely used.
OK. I was thinking of keeping them grouped together categorically.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 2:31 am
by zebedeeboss
dolphin_oracle wrote: ↑Mon Jun 12, 2023 11:07 am
@zebedeeboss the latest ddm-mx utility should ask if the user wants to try "nvidia-driver" if a part is not found any in PCIID lists.
The user will be informed the part wasn’t found then offered to install nvidia-driver anyway.
I absolutely love
how responsive this Community is to user problems. I will re-install today
@dolphin_oracle to check this out.
Many many thanks
Zeb
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 3:14 am
by zebedeeboss
zebedeeboss wrote: ↑Tue Jun 13, 2023 2:31 am
dolphin_oracle wrote: ↑Mon Jun 12, 2023 11:07 am
@zebedeeboss the latest ddm-mx utility should ask if the user wants to try "nvidia-driver" if a part is not found any in PCIID lists.
The user will be informed the part wasn’t found then offered to install nvidia-driver anyway.
I absolutely love
how responsive this Community is to user problems. I will re-install today @dolphin_oracle to check this out.
Many many thanks
Zeb
Worked perfectly as expected - Thank you
https://imgur.com/8fiOpDA.png
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: PC Specialist product: Amd X399 Overclocked v: N/A
serial: <superuser required>
Mobo: ASUSTeK model: PRIME X399-A v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 1203 date: 10/09/2019
CPU:
Info: model: AMD Ryzen Threadripper 2950X bits: 64 type: MT MCP MCM arch: Zen+ gen: 2 level: v3
note: check built: 2018-21 process: GF 12nm family: 0x17 (23) model-id: 8 stepping: 2
microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 4 threads: 32 dies: 2 smt: enabled cache: L1: 1.5 MiB
desc: d-16x32 KiB; i-16x64 KiB L2: 8 MiB desc: 16x512 KiB L3: 32 MiB desc: 4x8 MiB
Speed (MHz): avg: 2129 high: 2250 min/max: 2200/3950 boost: disabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 1687 2: 1687 3: 1685 4: 2250 5: 2200 6: 2200
7: 2200 8: 2200 9: 2250 10: 1926 11: 2250 12: 2200 13: 2200 14: 2200 15: 2200 16: 2199 17: 2200
18: 2200 19: 1687 20: 2250 21: 2200 22: 2200 23: 2200 24: 2200 25: 2250 26: 1928 27: 2250
28: 2250 29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 252772
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ZOTAC driver: nvidia v: 525.105.17
non-free: N/A status: unknown device ID pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 42:00.0 chip-ID: 10de:2786 class-ID: 0300
Device-2: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-4:4
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1355x381mm (53.35x15.00")
s-diag: 1408mm (55.42")
Monitor-1: DP-0 pos: primary,left res: 1760x1440 dpi: 37 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
Monitor-2: DP-2 pos: right res: 3360x1440 dpi: 72 size: 1193x336mm (46.97x13.23")
diag: 1239mm (48.8") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA Graphics Device/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 5-2:2
chip-ID: 0951:16ad pcie: class-ID: 0300 gen: 3 serial: <filter> speed: 8 GT/s lanes: 16
bus-ID: 0c:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-2: NVIDIA vendor: ZOTAC driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 42:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-3: Kingston HyperX Cloud Revolver S type: USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: YGTek Webcam type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-4:4
chip-ID: 1d6c:1278 class-ID: 0102 serial: <filter>
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 05:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: 1000 bus-ID: 0a:00.0 chip-ID: 10ec:8161 class-ID: 0200
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 5.46 TiB used: 16.29 GiB (0.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: SBM02103 temp: 29.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1 size: 1.82 TiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q
scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
scheme: GPT
Partition:
ID-1: / raw-size: 931.25 GiB size: 915.56 GiB (98.31%) used: 16.29 GiB (1.8%) fs: ext4
dev: /dev/nvme1n1p2 maj-min: 259:7
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme1n1p1 maj-min: 259:6
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 47.0 C mobo: 30.0 C gpu: nvidia temp: 45 C
Fan Speeds (RPM): cpu: 1108 case-1: 0 case-2: 0 case-3: 0 gpu: nvidia fan: 0%
Power: 12v: 12.03 5v: N/A 3.3v: N/A vbat: 3.14
Repos:
Packages: pm: dpkg pkgs: 2153 libs: 1121 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bookworm main non-free
Info:
Processes: 439 Uptime: 5m wakeups: 0 Memory: 62.64 GiB used: 2.96 GiB (4.7%) Init: systemd v: 252
target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 3:17 am
by Eadwine Rose
Image changed to link, please read the forum rules.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 4:40 am
by zebedeeboss
Eadwine Rose wrote: ↑Tue Jun 13, 2023 3:17 am
Image changed to link, please read the forum rules.
yeah sorry I changed it after I originally posted it.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 4:41 am
by Eadwine Rose
I guess I'm quick
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 6:50 am
by Jerry3904
Now that we have this working in MXFB to get to the page that handles the All Apps disable
we seem to no longer have this working to get to the page that handles the theme
Tried on two different machines with MX-21 and MX-23
@dolphin_oracle
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 6:52 am
by dolphin_oracle
Ok
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 8:30 am
by siamhie
Jerry3904 wrote: ↑Tue Jun 13, 2023 6:50 am
we seem to no longer have this working to get to the page that handles the theme
Tried on two different machines with MX-21 and MX-23 @dolphin_oracle
@Jerry3904 Works for me just not on the fly anymore. Only applies to newly opened windows. Tested with Thunar open.
The Window Manager section does work on the fly. MX-23. Haven't tested MX-21.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 10:33 am
by dolphin_oracle
Jerry3904 wrote: ↑Tue Jun 13, 2023 6:50 am
Now that we have this working in MXFB to get to the page that handles the All Apps disable
we seem to no longer have this working to get to the page that handles the theme
Tried on two different machines with MX-21 and MX-23 @dolphin_oracle
found the problem. dumb logic on my part. will have fixed tonight.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 11:16 am
by Jerry3904
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 11:37 am
by siamhie
Thanks
@dolphin_oracle
@Jerry3904 When I use the traditional toolbar (Appearance > Toolbar > Fluxbox) I have a new message in .xsession-errors.
Code: Select all
Failed to read: session.screen0.systray.pinLeft
Setting default value
Failed to read: session.screen0.systray.pinRight
Setting default value
Following this thread (#168 Feature: Make systray icon pinning (ordered) available
https://sourceforge.net/p/fluxbox/patches/168/)
I found this in the fluxbox.txt document. Line 1290 (
https://github.com/fluxbox/fluxbox/blob ... luxbox.txt)
Code: Select all
*session.screen0.pin{Left|Right}*: 'classes'::
Sort the system tray icons according to order specified in 'classes', which is
a comma-separated list of CLASSCLASS properties of the X clients (The second
field of WM_CLASS from the output of the *xprop(1)* utility).
+
Consider a system tray "A C B D E F". With pinRight set to "A, B" and pinLeft
set to "E, F" it will look like "E F [C D] A B" while the icons in [] are
unordered as usual.
All of the 'location' resources following require a pathname to their specific
files. This is where you can specify different files. Most of the defaults will
be located in the user's *~/.fluxbox* directory.
I added these two variables (as a default) to my init file and the error message disappears.
Code: Select all
session.screen0.pinLeft: E, F
session.screen0.pinRight: A, B
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 11:56 am
by Jerry3904
Got it, thanks.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 12:51 pm
by oldandtired
Hi. I just installed the beta on my old Dell Latitude E6220, with 8GB RAM and ~120GB root partition using btrfs.
The nala upgrade sticks on unpacking papirus-icon-theme (20230601-0.1-mx23+1 over 20230104-2), at 5.3%. The same happens on apt upgrade, apt-get upgrade etc, unsurprisingly.
After ctrl-c-ing out of nala I had to kill the stuck dpkg process.
I then marked papirus-icon-theme as held with apt-mark, and the update continued as expected.
So at first glance it looks like an issue with that icon package. Hope this helps.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 12:55 pm
by siamhie
Jerry3904 wrote: ↑Tue Jun 13, 2023 11:56 am
Got it, thanks.
@Jerry3904
Disregard that init post. I can't seem to replicate it anymore.
I removed those extra entries and have either logged out and in or rebooted several times for the past 15 minutes but the message doesn't reappear.
I don't know what could have triggered it but maybe it has something to do with MX Tweak because I was testing all the settings when I saw your initial post to dolphin.
I am getting a new message but I will wait for the update to MX Tweak.
Code: Select all
tint2: Using glib slice allocator (default). Run tint2 with environment variable G_SLICE=always-malloc in case of strange behavior or crashes
Usage: tint2 [OPTION...]
Options:
-c path_to_config_file Loads the configuration file from a
custom location.
-v, --version Prints version information and exits.
-h, --help Display this help and exits.
For more information, run `man tint2` or visit the project page
<https://gitlab.com/o9000/tint2>.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 1:29 pm
by dolphin_oracle
oldandtired wrote: ↑Tue Jun 13, 2023 12:51 pm
Hi. I just installed the beta on my old Dell Latitude E6220, with 8GB RAM and ~120GB root partition using btrfs.
The nala upgrade sticks on unpacking papirus-icon-theme (20230601-0.1-mx23+1 over 20230104-2), at 5.3%. The same happens on apt upgrade, apt-get upgrade etc, unsurprisingly.
After ctrl-c-ing out of nala I had to kill the stuck dpkg process.
I then marked papirus-icon-theme as held with apt-mark, and the update continued as expected.
So at first glance it looks like an issue with that icon package. Hope this helps.
the papirus icon theme takes forever to update. its highly compressed. so you very likely just didn't wait long enough. I mean it takes a loooonnnnnngggggg time.
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 3:50 pm
by markol
Just wanted to say (again) I'm running MX23KDE beta in two VMs and one laptop... and no problems so far. Thank you!
Re: MX-23 beta 1 feedback thread
Posted: Tue Jun 13, 2023 4:21 pm
by oldandtired
the papirus icon theme takes forever to update. its highly compressed. so you very likely just didn't wait long enough. I mean it takes a loooonnnnnngggggg time.
[/quote]
I do appreciate that, but stuck on 5.8% for over half an hour beats all previous records here for that theme! :)
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 14, 2023 10:12 am
by i_ri
hello dolphin_oracle
mx-idesktool
Melber's is a solid model. Thank You.
Melber Your invitation "Could we build...?" appreciated.
svg to png conversion.
<convert-im6.q16> has the alias <convert>
It uses librsvg2-bin [rsvg-convert] internally if, when svg input, though
<convert> expands the input file to any Type format. png, xpm, svg to png.
, so, there is no Condition for svg or not-svg file; all idesktool icons run through the same pass for moving copyidesk.png to a home directory.
This script does not resize the image to 48x48; tried it on the mx-tour95x96png and 480x480svg(a 512x512png displays at 48x48) tried it on pixmaps custom-toolbox 298x270svg(a 298x270png displays at 48x48;)
idesk is set in this script to initialize icon display at 48x48; did that with the introduction of svg support.
When creating custom lnk files,
png idesk displays sized view png;
svg idesk display must be sized-square x=y view svg.
mx-idesktool icons are stored in a home directory.
This is one more time i must not sneak-in CursorOver: gumby
If you do not do that last step of Drag New Icon Away, TEXT36 TEXT22, compensate, then this script will not stack New icons atop same space; there is a chance the New icon will not hide.
sample
and play. run this color names
<convert -list Color>
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 14, 2023 10:49 am
by operadude
For anyone who wants a Plank Firefox Icon fix for MX-23, Beta-1:
I am posting my solution in this thread, since someone has requested it.
A slight change from the fix for MX-21 (both Xfce & KDE).
A bit easier, and less complicated. The steps are included in the plain-text file here:
Simple Instructions to Fix Firefox Icon Problem in Plank for Any User.txt
At least one person was helped with my fix for MX-21.
As I stated in my post for MX-21, I AM NOT A DEVELOPER, and as such, I make no claim that my fix is the proper way to handle the Plank problem. However, it has worked for me for both Xfce & KDE for MX-23, Beta-1, and has not produced any unwanted side-effects or unwanted behavior.
If anyone (especially developers!) see any problems with my solution, in terms of causing any issues or side-effects, please let me know!
FYI: I have seen some requests on the Plank developer's site to correct the issue of a missing Firefox Icon, or worse, a second, blurry icon; however, the issue has not been resolved by the maintainers of Plank. I'll post there, and see if I get lucky!
HTH
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 14, 2023 12:04 pm
by DeepDayze
oldandtired wrote: ↑Tue Jun 13, 2023 4:21 pm
the papirus icon theme takes forever to update. its highly compressed. so you very likely just didn't wait long enough. I mean it takes a loooonnnnnngggggg time.
I do appreciate that, but stuck on 5.8% for over half an hour beats all previous records here for that theme! :)
[/quote]
That's because the papirus-icon-theme has thousands of icons in different colors.
Re: MX-23 beta 1 feedback thread
Posted: Wed Jun 14, 2023 1:00 pm
by siamhie
Started getting tint2 messages last night in .xsession-errors file. MX-23 fluxbox beta1
Code: Select all
tint2: Using glib slice allocator (default). Run tint2 with environment variable G_SLICE=always-malloc in case of strange behavior or crashes
Usage: tint2 [OPTION...]
Options:
-c path_to_config_file Loads the configuration file from a
custom location.
-v, --version Prints version information and exits.
-h, --help Display this help and exits.
For more information, run `man tint2` or visit the project page
<https://gitlab.com/o9000/tint2>.
Also pops up in terminal.
t2.png
Apt history.
Code: Select all
2023-06-14 07:23:32 upgrade mx-rofi-manager all 23.06.07 23.06.13
2023-06-13 21:59:54 upgrade mx-tweak amd64 23.06.02mx23 23.06.03mx23
2023-06-13 21:59:54 upgrade mx-idesktool all 23.06.02mx23 23.06.13mx23
2023-06-13 21:59:54 upgrade mxfb-docs all 23.05.03mx23 23.06.01mx23
2023-06-13 21:59:53 upgrade mx-fluxbox-data all 23.06.02mx23 23.06.03mx23
2023-06-13 21:59:53 upgrade mx-fluxbox all 23.06.02mx23 23.06.03mx23
2023-06-13 21:59:53 install librsvg2-bin amd64 <none> 2.54.5+dfsg-1
2023-06-13 21:59:52 upgrade firefox amd64 114.0~mozillabinaries-1mx23+1 114.0.1~mozillabinaries-1mx23+1
2023-06-13 16:57:59 install liblua5.4-0 amd64 <none> 5.4.4-3
2023-06-13 16:57:59 install libboost-filesystem1.74.0 amd64 <none> 1.74.0+ds1-21
2023-06-13 16:57:59 install gpick amd64 <none> 0.2.6-1
2023-06-13 05:15:11 upgrade plymouth-themes-mx all 23.02.01 23.06.01
2023-06-13 05:15:10 upgrade mx-apps-fluxbox all 23.07.01mx23 23.07.02mx23
2023-06-13 05:15:10 upgrade mx23-artwork all 23.05.01 23.06.01
2023-06-12 15:17:16 upgrade user-installed-packages all 23.06.02 23.06.03
2023-06-12 15:17:15 upgrade mx-tweak amd64 23.06.01mx23 23.06.02mx23
2023-06-12 15:17:15 upgrade checkaptgpg all 23.05.02 23.06.01
2023-06-12 06:44:06 upgrade ddm-mx all 23.03.04 23.03.05
2023-06-11 18:47:10 upgrade quick-system-info-gui amd64 23.06.03 23.06.04
2023-06-11 11:31:37 install x11vnc amd64 <none> 0.9.16-9
2023-06-11 11:31:37 install tk amd64 <none> 8.6.13
2023-06-11 11:31:37 install tk8.6 amd64 <none> 8.6.13-2
2023-06-11 11:31:37 install libvncserver1 amd64 <none> 0.9.14+dfsg-1
2023-06-11 11:31:37 install libvncclient1 amd64 <none> 0.9.14+dfsg-1
2023-06-11 11:31:37 install libtk8.6 amd64 <none> 8.6.13-2
2023-06-11 11:29:01 install xvfb amd64 <none> 2:21.1.7-3
2023-06-11 07:49:37 upgrade user-installed-packages all 23.05.01 23.06.02
2023-06-11 07:49:37 upgrade quick-system-info-gui amd64 23.02.07 23.06.03
2023-06-11 07:49:37 upgrade mx-packageinstaller-pkglist all 23.07.12mx23 23.07.13mx23
2023-06-11 07:49:37 upgrade mx-goodies all 23.06.01 23.06.04
2023-06-11 07:49:37 upgrade lo-main-helper all 23.07.12mx23 23.07.13mx23
2023-06-11 07:49:37 upgrade apt-notifier all 23.05.01 23.06.01
Re: MX-23 beta 1 feedback thread
Posted: Thu Jun 15, 2023 4:41 pm
by lordmmx
i found out the issue is upsream not only with the non sse2 issue but it fails to install from debian iso's.
Re: MX-23 beta 1 feedback thread
Posted: Fri Jun 16, 2023 12:14 am
by Eadwine Rose
Beta 2 is available:
viewtopic.php?t=75619
Please move on to download and test that one. Thank you for all your feedback! :)
