MX Linux Forum

Code: Select all

Processing triggers for nvidia-tesla-450-alternative (450.172.01-2~deb11u1) ...
Setting up nvidia-tesla-450-kernel-dkms (450.172.01-2~deb11u1) ...
Loading new nvidia-tesla-450-450.172.01 DKMS files...
Building for 5.17.0-3.2-liquorix-amd64
Building initial module for 5.17.0-3.2-liquorix-amd64
Done.

nvidia-tesla-450.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.17.0-3.2-liquorix-amd64/updates/dkms/

nvidia-tesla-450-modeset.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.17.0-3.2-liquorix-amd64/updates/dkms/

nvidia-tesla-450-drm.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.17.0-3.2-liquorix-amd64/updates/dkms/

nvidia-tesla-450-uvm.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.17.0-3.2-liquorix-amd64/updates/dkms/

depmod...

DKMS: install completed.
Setting up nvidia-tesla-450-driver (450.172.01-2~deb11u1) ...
Processing triggers for glx-alternative-nvidia (1.2.1~deb11u1) ...
Processing triggers for glx-alternative-mesa (1.2.1~deb11u1) ...
Processing triggers for libc-bin (2.31-13+deb11u3) ...
Processing triggers for update-glx (1.2.1~deb11u1) ...
Processing triggers for glx-alternative-nvidia (1.2.1~deb11u1) ...
Processing triggers for libc-bin (2.31-13+deb11u3) ...
Processing triggers for initramfs-tools (0.140) ...
update-initramfs: Generating /boot/initrd.img-5.17.0-3.2-liquorix-amd64
W: Possible missing firmware /lib/firmware/i915/adlp_dmc_ver2_14.bin for module i915
I: The initramfs will attempt to resume from /dev/sdb3
I: (UUID=bbf9b48c-10d8-4d91-afcd-560b264bf78e)
I: Set the RESUME variable to override this.
Processing triggers for bumblebee (3.2.1-27) ...
Please wait, creating menu file - stored in /home/steve/.fluxbox/submenus/full_menu ...
Menu file created and ready to be used
Finished


========================================
========================================

To restore open source drivers later use:  
sudo ddm-mx -p nvidia

========================================
========================================


For recovery help see 
https://mxlinux.org/wiki/hardware/nvidia-driver-install-recovery

Information written to /home/steve/ddm-mx-nvidia_removal_command.txt

Code: Select all

System:
  Kernel: 5.10.0-13-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-amd64 
  root=UUID=<filter> ro quiet splash 
  init=/lib/systemd/systemd 
  Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM 
  Distro: MX-21.1_KDE_x64 Wildflower April 9  2022 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Desktop System: Hewlett-Packard product: HP Z600 Workstation 
  v: N/A serial: <filter> Chassis: type: 6 serial: <filter> 
  Mobo: Hewlett-Packard model: 0AE8h serial: <filter> 
  BIOS: Hewlett-Packard v: 786G4 v01.17 date: 08/19/2009 
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M185 
  serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
  status: Discharging 
CPU:
  Info: 2x Quad Core model: Intel Xeon E5504 bits: 64 type: MCP SMP 
  arch: Nehalem family: 6 model-id: 1A (26) stepping: 5 microcode: 1D 
  cache: L2: 8 MiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31922 
  Speed: 1637 MHz min/max: 1596/1995 MHz Core speeds (MHz): 1: 1637 
  2: 1663 3: 1617 4: 1626 5: 1602 6: 1604 7: 1616 8: 1605 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no 
  microcode; SMT disabled 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, 
  STIBP: disabled, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA GK107GL [Quadro K2000D] driver: nouveau v: kernel 
  bus-ID: 0f:00.0 chip-ID: 10de:0ff9 class-ID: 0300 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
  loaded: modesetting unloaded: fbdev,vesa display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.7x9.4") 
  s-diag: 485mm (19.1") 
  Monitor-1: DVI-I-1 res: 1600x900 hz: 60 dpi: 92 
  size: 443x249mm (17.4x9.8") diag: 508mm (20") 
  OpenGL: renderer: NVE7 v: 4.3 Mesa 21.2.5 direct render: Yes 
Audio:
  Device-1: Intel 82801JI HD Audio vendor: Hewlett-Packard 
  driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3a3e 
  class-ID: 0403 
  Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel v: kernel 
  bus-ID: 0f:00.1 chip-ID: 10de:0e1b class-ID: 0403 
  Sound Server-1: ALSA v: k5.10.0-13-amd64 running: yes 
  Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:
  Device-1: Broadcom NetXtreme BCM5764M Gigabit Ethernet PCIe 
  vendor: Hewlett-Packard driver: tg3 v: kernel port: c0c0 
  bus-ID: 01:00.0 chip-ID: 14e4:1684 class-ID: 0200 
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  Device-2: Intel 82557/8/9/0/1 Ethernet Pro 100 
  vendor: Compaq NC3121 Fast NIC driver: e100 v: kernel port: e000 
  bus-ID: 37:04.0 chip-ID: 8086:1229 class-ID: 0200 
  IF: eth1 state: down mac: <filter> 
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) 
  type: USB driver: btusb v: 0.8 bus-ID: 5-1.4:3 chip-ID: 0a12:0001 
  class-ID: e001 
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> 
  bt-v: 2.1 lmp-v: 4.0 sub-v: 22bb hci-v: 4.0 rev: 22bb 
  Info: acl-mtu: 310:10 sco-mtu: 64:8 
  link-policy: rswitch hold sniff park link-mode: slave accept 
  service-classes: rendering, capturing, object transfer, audio 
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 
  port: c0c0 bus-ID: 00:1f.2 chip-ID: 8086.2822 rev: class-ID: 0104 
Drives:
  Local Storage: total: 4.55 TiB used: 36.41 GiB (0.8%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 QVO 1TB 
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B 
  speed: 3.0 Gb/s type: SSD serial: <filter> rev: 1B6Q scheme: MBR 
  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST4000DM004-2CV104 
  size: 3.64 TiB block-size: physical: 4096 B logical: 512 B 
  speed: 3.0 Gb/s type: HDD rpm: 5425 serial: <filter> rev: 0001 
  temp: 30 C scheme: GPT 
Partition:
  ID-1: / raw-size: 923.5 GiB size: 907.93 GiB (98.31%) 
  used: 36.41 GiB (4.0%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) 
  priority: -2 dev: /dev/sda2 maj-min: 8:2 
Sensors:
  System Temperatures: cpu: 40.0 C mobo: N/A gpu: nouveau temp: 39.0 C 
  Fan Speeds (RPM): N/A gpu: nouveau fan: 1770 
Repos:
  Packages: 2793 note: see --pkg apt: 2786 lib: 1586 flatpak: 7 
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
  1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
  1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
  1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list 
  1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
  2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
  Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
  1: deb https://deb.opera.com/opera-stable/ stable non-free
Info:
  Processes: 265 Uptime: 12m wakeups: 8 Memory: 23.51 GiB 
  used: 2.1 GiB (8.9%) Init: systemd v: 247 runlevel: 5 default: 5 
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: bash 
  default: Bash v: 5.1.4 running-in: quick-system-info-mx inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)