Page 4 of 4

Re: Keyboard/touchpad don't respond

Posted: Tue Oct 03, 2023 2:35 pm
by Charlie Brown
@Dweller Do you still have MX installed on a partition?

Re: Keyboard/touchpad don't respond

Posted: Wed Oct 04, 2023 1:09 pm
by Dweller
BitterTruth wrote: Tue Oct 03, 2023 12:12 pm@Dweller
Thank you very much for coming back with the information
Thank you for help.
This huge respect for users is a significant reason to use MX even if there are some alternatives. For now i just technically can't.

Re: Keyboard/touchpad don't respond

Posted: Fri Oct 06, 2023 10:47 am
by Dweller
Charlie Brown wrote: Tue Oct 03, 2023 2:35 pm @Dweller Do you still have MX installed on a partition?
I'll install it tomorrow or on sunday. I'll be glad if the problem is solved

Re: Keyboard/touchpad don't respond

Posted: Fri Nov 17, 2023 9:32 pm
by Dweller
I just installed MX on my computer again... and it just work! Without any systemd or nomodeset, absolutely standard load.
I have no idea, how it could be, because I didn't update my bootable usb and I didn't connect to the internet during installation.
Anyway, thank you very much!

Here is the system info:

Code: Select all

System:
  Kernel: 6.4.0-1mx-ahs-amd64 [6.4.4-1~mx23+1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.4.0-1mx-ahs-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_ahs_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: LENOVO product: 82SK v: IdeaPad 5 Pro 16IAH7 serial: <superuser required>
    Chassis: type: 10 v: IdeaPad 5 Pro 16IAH7 serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0T76462 WIN serial: <superuser required> UEFI: LENOVO
    v: J5CN27WW date: 08/30/2022
Battery:
  ID-1: BAT0 charge: 47.7 Wh (63.7%) condition: 74.9/75.0 Wh (99.9%) volts: 15.8 min: 15.4
    model: SMP L20M4PE1 type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: 12th Gen Intel Core i7-12700H bits: 64 type: MST AMCP arch: Alder Lake gen: core 12
    level: v3 note: check built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154)
    stepping: 3 microcode: 0x42A
  Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled cache: L1: 1.2 MiB
    desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB
    desc: 1x24 MiB
  Speed (MHz): avg: 2329 high: 2700 min/max: 400/4600:4700:3500 scaling: driver: intel_pstate
    governor: powersave cores: 1: 2700 2: 2700 3: 2700 4: 1194 5: 796 6: 2700 7: 727 8: 2700 9: 2700
    10: 2700 11: 679 12: 2700 13: 2700 14: 2700 15: 2700 16: 2700 17: 2700 18: 2700 19: 2700
    20: 2700 bogomips: 107520
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-P Integrated Graphics vendor: Lenovo driver: i915 v: kernel
    arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports: active: eDP-1 empty: DP-1, DP-2, DP-3,
    DP-4, HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:46a6 class-ID: 0300
  Device-2: Bison Integrated RGB Camera type: USB driver: uvcvideo bus-ID: 1-4:3
    chip-ID: 5986:2146 class-ID: fe01 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1600 s-dpi: 96 s-size: 677x423mm (26.65x16.65") s-diag: 798mm (31.43")
  Monitor-1: eDP-1 model: BOE Display 0x09b6 built: 2021 res: 2560x1600 hz: 60 dpi: 188
    gamma: 1.2 size: 345x215mm (13.58x8.46") diag: 407mm (16") ratio: 16:10 modes: 2560x1600
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Graphics (ADL GT2) direct-render: Yes
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Lenovo
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:51c8 class-ID: 0401
  API: ALSA v: k6.4.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel modules: wl bus-ID: 00:14.3
    chip-ID: 8086:51f0 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 3462 hci-v: 5.2 rev: 3462
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 505.42 GiB used: 6.48 GiB (1.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZAL4512HBLU-00BL2 size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 7L1QHXC7 temp: 22.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: JetFlash 32GB size: 28.48 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 6.47 GiB (13.6%) fs: ext4
    dev: /dev/nvme0n1p3 maj-min: 259:3
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 8.4 MiB (1.6%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 9.77 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p4
    maj-min: 259:4
Sensors:
  System Temperatures: cpu: 30.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2059 libs: 1047 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
    2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm ahs
Info:
  Processes: 366 Uptime: 18m wakeups: 1330 Memory: 15.35 GiB used: 2.7 GiB (17.6%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Re: Keyboard/touchpad don't respond

Posted: Fri Nov 17, 2023 10:18 pm
by Dweller
emm.. I just reinstalled it, and there's same problem again. Mystery...
Well, I'm going to try some new installations with different parameters

Re: Keyboard/touchpad don't respond

Posted: Fri Nov 17, 2023 10:30 pm
by Dweller
I'm here again with absolutely working system.
So the problem is definitely consists in the parameters, that I enter during installation.

Re: Keyboard/touchpad don't respond  [Solved]

Posted: Fri Nov 17, 2023 11:11 pm
by Dweller
Current problem solves by services settings.
I usually unmark scanner daemon, printer daemon (cups) and message daemon (dbus). The last one (dbus) was the issue.
BUT I'm pretty sure, that I tried to install MXLinux without touching the services settings in my previous attempts. It's weird.

Anyway, the problem is solved, and I thank you very much.
At least for your patience.