MX Linux Forum

Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/

Post your hardware specs.

http://www.forum.mxlinux.org/viewtopic.php?t=36028

Page 1 of 1

Post your hardware specs.

Posted: Tue Apr 15, 2014 7:37 am
by anticapitalista
I think it would be useful to get some feedback on what sort of hardware specs MX-14 is running on.
Note only MX-14 and installed to a hard drive ie not in VirtualBox.

inxi -F gives quite a lot of info - but also post to say if it is a laptop/desktop etc.

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 7:50 am
by NGIB
I have installed it on my 4 different laptops.

Most basic is an HP DM1 netbook style (circa 2009) that is a dual core AMD E-350 with 3GB RAM, AMD graphics. lspci output:

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310]
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310]
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 Network controller: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]

Next is a Toshiba Satellite A505 (again circa 2009), Core I-3 with 4GB RAM and Intel graphics, lspci output:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
03:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev 01)
03:00.1 System peripheral: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller] (rev 01)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

My main computer is an HP Elitebook 8440P with Core I-5, 4GB RAM and Intel graphics. I can provide specific output later.

My fastest is an Ibuypower CZ-12 with Core I-7, 8GB RAM, and Nvidia 520M graphics. Again, more specific specs later.

I have also booted it up on an old 32 bit Toshiba laptop (circa 2007) I have at home with a Centrino processor, 2GB RAM, and Intel graphics - ran very well.

I do not have any desktops at all and haven't since 2001...

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 7:58 am
by ko
MX-14: inxi -F on my 5 year old 12" laptop:

Code: Select all

ko@lappy:~
$ inxi -F
System:    Host: lappy Kernel: 3.13-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: MEDION model: S2210 v: Ver 1.000 Bios: American Megatrends v: A1216IM7 V1.09 date: 10/23/2008
CPU:       Dual core Intel Pentium Dual CPU T3200 (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 1000 MHz 2: 1000 MHz
Graphics:  Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz
           GLX Renderer: Mesa DRI Intel 965GM x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.13-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: down mac: 00:21:85:da:73:46
           Card-2: Ralink RT2790 Wireless 802.11n 1T/2R PCIe driver: rt2800pci
           IF: wlan0 state: up mac: 00:15:af:da:a8:1a
Drives:    HDD Total Size: 320.1GB (37.4% used) ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID-1: / size: 17G used: 3.1G (20%) fs: ext4 dev: /dev/sda6 
           ID-2: /home size: 39G used: 3.0G (8%) fs: ext4 dev: /dev/sda7 
           ID-3: swap-1 size: 3.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 46.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 144 Uptime: 4:56 Memory: 360.7/3031.8MB Client: Shell (bash) inxi: 2.1.18 
ko@lappy:~
inxi -F on my testsystem (desktop)

Code: Select all

  $ inxi -F
System:    Host: whiskey Kernel: 3.13-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: MEDIONPC model: MS-7708 v: 1.2 Bios: American Megatrends v: A7708MLN.105 date: 09/21/2010
CPU:       Quad core Intel Core i5 CPU 760 (-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Redwood [Radeon HD 5670]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1440x900@59.9hz
           GLX Renderer: Gallium 0.4 on AMD REDWOOD GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI Redwood HDMI Audio [Radeon HD 5000 Series] 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.13-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 6c:62:6d:94:91:64
           Card-2: IMC Networks Mediao 802.11n WLAN [Realtek RTL8191SU] driver: r8712u
           IF: wlan0 state: down mac: 48:5d:60:19:3f:22
Drives:    HDD Total Size: 4040.8GB (-) ID-1: /dev/sda model: INTEL_SSDSA2M040 size: 40.0GB
           ID-2: /dev/sdb model: ST32000542AS size: 2000.4GB ID-3: /dev/sdc model: HD204UI size: 2000.4GB
Partition: ID-1: / size: 38G used: 2.9G (8%) fs: ext4 dev: /dev/sdb16 
           ID-2: swap-1 size: 2.09GB used: 0.00GB (0%) fs: swap dev: /dev/sdb13 
Sensors:   System Temperatures: cpu: 37.0C mobo: N/A gpu: 49.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 150 Uptime: 0 min Memory: 130.3/4039.3MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 8:28 am
by zarg2
Dell 4700.
Intel processor · Pentium 4 · DDR2 SDRAM 1.5G
Processor Speed: 3 GHz · 2.8 GHz
MX14 as released with all codecs installed and Firefox as the browser.
Dell 2350
Intel processor · Pentium 4 · DDR2 SDRAM 512MB
MX14 with LXDE
Both using Onboard graphics

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 8:50 am
by Gaer Boy
On desktop:

Code: Select all

$ inxi -F
System:    Host: office Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASUSTeK model: M4A88TD-V EVO/USB3 v: Rev X.0x
           Bios: American Megatrends v: 1601 date: 09/08/2010
CPU:       Triple core AMD Phenom II X4 B50 (-MCP-) cache: 1536 KB 
           Clock Speeds: 1: 800 MHz 2: 800 MHz 3: 3100 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RS880 [Radeon HD 4250]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.0hz
           GLX Renderer: Gallium 0.4 on AMD RS880 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI RS880 HDMI Audio [Radeon HD 4200 Series] 
           driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: bc:ae:c5:90:04:2a
Drives:    HDD Total Size: 1120.2GB (12.6% used) ID-1: /dev/sda model: Corsair_Force_3 size: 120.0GB
           ID-2: /dev/sdb model: ST1000DM005_HD10 size: 1000.2GB
Partition: ID-1: / size: 18G used: 5.9G (36%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 8.39GB used: 0.00GB (0%) fs: swap dev: /dev/sdb11 
Sensors:   System Temperatures: cpu: 33.0C mobo: 30.0C 
           Fan Speeds (in rpm): cpu: 3515 psu: 0 sys-1: 0 
Info:      Processes: 168 Uptime: 6 days Memory: 799.6/7859.5MB Client: Shell (bash) inxi: 2.1.18
On netbook:

Code: Select all

$ inxi -F
System:    Host: mobile Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Gateway product: AOA150 v: LU.S050A.105
           Mobo: Gateway model: N/A Bios: Gateway v: v0.3103 date: 12/09/2008
CPU:       Single core Intel Atom CPU N270 (-HT-) cache: 512 KB 
           Clock Speeds: 1: 800 MHz 2: 1600 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x600@60.0hz
           GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 GLX Version: 1.4 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1e:68:c0:92:93
           Card-2: Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
           driver: ath5k
           IF: wlan0 state: down mac: 00:22:69:3c:e7:a2
Drives:    HDD Total Size: 120.0GB (2.4% used)
           ID-1: /dev/sda model: WDC_WD1200BEVS size: 120.0GB
Partition: ID-1: / size: 9.5G used: 2.6G (29%) fs: ext4 dev: /dev/sda7 
           ID-2: swap-1 size: 1.08GB used: 0.00GB (0%) fs: swap dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 37.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 124 Uptime: 1 min Memory: 115.5/489.0MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:03 am
by peregrine
Desktop

Code: Select all

karen@mxdesk:~
$ inxi -F
System:    Host: mxdesk Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: TAR product: N68SA-M2T v: 5.0
           Mobo: TAR model: N68SA-M2T v: 1.0
           Bios: Phoenix v: 6.00 PG date: 07/16/2007
CPU:       Dual core AMD Athlon 64 X2 4800+ (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 2200 MHz 2: 2200 MHz
Graphics:  Card: NVIDIA G98 [GeForce 8400 GS]
           Display Server: X.Org 1.12.4 driver: nvidia
           Resolution: 1920x1080@59.9hz
           GLX Renderer: GeForce 8400 GS/PCIe/SSE2/3DNOW!
           GLX Version: 3.3.0 NVIDIA 319.82
Audio:     Card NVIDIA MCP67 High Definition Audio driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:e0:4d:3c:7d:b4
Drives:    HDD Total Size: 640.1GB (58.9% used)
           ID-1: /dev/sda model: WDC_WD6400AAKS size: 640.1GB
Partition: ID-1: / size: 19G used: 6.4G (36%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 19G used: 6.5G (36%) fs: ext4 dev: /dev/sda8 
           ID-3: swap-1 size: 3.74GB used: 1.68GB (45%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A gpu: 70C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 171 Uptime: 11 days Memory: 1343.7/2023.1MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:05 am
by Eadwine Rose
Desktop computer, other specs in signature

Code: Select all

System:    Host: eadwineMX14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASUSTeK model: M4A785TD-V EVO v: Rev X.0x serial: MT7006K05201139
           Bios: American Megatrends v: 2005 date: 04/15/2010
CPU:       Quad core AMD Athlon II X4 635 (-MCP-) cache: 2048 KB 
           Clock Speeds: 1: 800 MHz 2: 800 MHz 3: 800 MHz 4: 2900 MHz
Graphics:  Card: NVIDIA Device 1282
           Display Server: X.org 1.12.4 driver: nvidia
           tty size: 80x25 Advanced Data: N/A for root
Audio:     Card-1 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) 
           driver: snd_hda_intel 
           Card-2 NVIDIA Device 0e0f driver: snd_hda_intel 
           Card-3 Logitech QuickCam E 3500 driver: USB Audio 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full 
           mac: 48:5b:39:f4:93:4e
Drives:    HDD Total Size: 1004.2GB (7.1% used)
           ID-1: /dev/sda model: WDC_WD5000AAKS size: 500.1GB
           USB ID-2: /dev/sdb model: HDP725050GLA360 size: 500.1GB
Partition: ID-1: / size: 48G used: 5.0G (11%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 385G used: 25G (7%) fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 2.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 31.0C mobo: 32.0C gpu: 33C 
           Fan Speeds (in rpm): cpu: 2257 psu: 0 sys-1: 829 
Info:      Processes: 199 Uptime: 2:23 Memory: 1237.5/8115.5MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:06 am
by Paul..
Desktop:

Code: Select all

# inxi -F
System:    Host: BigDaddy Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: MSI model: 890FXA-GD70 (MS-7640) v: 1.0
           Bios: American Megatrends v: V1.14 date: 03/20/2012
CPU:       Hexa core AMD Phenom II X6 1055T (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 800 MHz 2: 800 MHz 3: 2200 MHz 4: 800 MHz 5: 800 MHz
           6: 800 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210]
           Display Server: X.org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa)
           tty size: 90x40 Advanced Data: N/A for root
Audio:     Card-1 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) 
           driver: snd_hda_intel 
           Card-2 NVIDIA High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth1 state: down mac: 40:61:86:f8:89:ce
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 40:61:86:f8:89:cf
Drives:    HDD Total Size: 2820.6GB (45.4% used)
           ID-1: /dev/sdc model: WDC_WD1002FAEX size: 1000.2GB
           ID-2: /dev/sdd model: WDC_WD1002FAEX size: 1000.2GB
           ID-3: /dev/sda model: ST3500418AS size: 500.1GB
           ID-4: /dev/sdb model: WDC_WD3200AAKS size: 320.1GB
Partition: ID-1: / size: 52G used: 4.7G (10%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 4.20GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 26.5C mobo: N/A gpu: 41.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 199 Uptime: 9 min Memory: 435.2/8111.5MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:13 am
by kmathern
Desktop. Not actually in MX right now, but MX runs well with this machine.

Code: Select all

inxi -Fxxx
System:    Host: mepis1 Kernel: 3.14-trunk-486 i686 (32 bit gcc: 4.8.2) 
           Desktop: Xfce 4.10.2 (Gtk 2.24.18) info: xfce4-panel dm: lightdm Distro: Debian GNU/Linux jessie/sid 
Machine:   Mobo: N/A model: nVidia-nForce Bios: Phoenix v: 6.00 PG date: 08/04/2004
CPU:       Single core AMD Athlon XP 3000+ (-UP-) cache: 512 KB clocked at 2166 MHz flags: (pae sse) bmips: 4333 
Graphics:  Card: NVIDIA NV34 [GeForce FX 5200] bus-ID: 02:00.0 chip-ID: 10de:0322
           Display Server: X.Org 1.14.5 driver: nvidia Resolution: 1600x900@50.0hz
           GLX Renderer: GeForce FX 5200/AGP/SSE/3DNOW! GLX Version: 2.1.2 NVIDIA 173.14.39 Direct Rendering: Yes
Audio:     Card Aureal Vortex 2 driver: snd_au8830 ports: d200 d300 bus-ID: 01:0a.0 chip-ID: 12eb:0002 
           Sound: Advanced Linux Sound Architecture v: k3.14-trunk-486
Network:   Card: Realtek RTL-8139/8139C/8139C+
           driver: 8139too v: 0.9.28 port: d400 bus-ID: 01:0b.0 chip-ID: 10ec:8139
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:50:70:d6:82:1c
Drives:    HDD Total Size: 245.0GB (50.1% used)
           ID-1: /dev/sdb model: Maxtor_6Y120P0 size: 122.9GB serial: Y32VMREE
           ID-2: /dev/sda model: WDC_WD1200JB size: 120.0GB serial: WD-WMACK1650272
           USB ID-3: /dev/sdc model: Cruzer size: 2.0GB serial: 0572700EFE224B8C-0:0
Partition: ID-1: / size: 5.7G used: 5.0G (93%) fs: ext4 dev: /dev/sdb7 
           ID-2: swap-1 size: 0.81GB used: 0.50GB (61%) fs: swap dev: /dev/sda9 
Sensors:   System Temperatures: cpu: 36.0C mobo: 35.4C gpu: 0.0: 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 143 Uptime: 2 days Memory: 744.2/1008.7MB 
           Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 4.8.2 alt: 4.6/4.7 
           Client: Shell (bash 4.3.81 running in tilda) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:21 am
by joany

Code: Select all

username@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: HP Pavilion 061 product: RC658AA-ABA a1630n v: 0nx1114RE101NODM300
           Mobo: ASUSTek model: NODUSM3 v: 1.05 Bios: Phoenix v: 3.07 date: 08/02/2006
CPU:       Dual core AMD Athlon 64 X2 4600+ (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 1000 MHz 2: 1000 MHz
Graphics:  Card: NVIDIA C51 [GeForce 6150 LE]
           Display Server: X.Org 1.12.4 driver: nvidia Resolution: 1280x1024@60.0hz
           GLX Renderer: GeForce 6150 LE/integrated/SSE2/3DNOW! GLX Version: 2.1.2 NVIDIA 304.117
Audio:     Card NVIDIA MCP51 High Definition Audio driver: snd_hda_intel Sound: ALSA v: k3.12-0.bpo.1-686-pae
Network:   Card: NVIDIA MCP51 Ethernet Controller driver: forcedeth
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:18:f3:f2:3e:49
Drives:    HDD Total Size: 370.1GB (30.4% used) ID-1: /dev/sda model: WDC_WD2500JS size: 250.1GB
           ID-2: /dev/sdb model: ST3120026A size: 120.0GB
Partition: ID-1: / size: 15G used: 4.7G (34%) fs: ext4 dev: /dev/sda5 
           ID-2: /home size: 25G used: 2.1G (9%) fs: ext4 dev: /dev/sda6 
           ID-3: swap-1 size: 6.47GB used: 0.00GB (0%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 165 Uptime: 7 min Memory: 901.7/3987.1MB Client: Shell (bash) inxi: 2.1.18 
username@mx1:~

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 9:26 am
by Jerry3904
On the smallest of the 3 machines I have MX-14 installed on, a AAO D250 laptop, the OS runs extremely well--and QupZilla is very good for it given its known limitations:
jb@mx1:~
$ inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: Acer model: Aspire one v: V1.28
Bios: Acer v: V1.28 date: 07/01/2010
CPU: Single core Intel Atom CPU N270 (-HT-) cache: 512 KB
Clock Speeds: 1: 1333 MHz 2: 1333 MHz
Graphics: Card: Intel Mobile 945GSE Express Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1024x600@60.1hz
GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2
GLX Version: 1.4 Mesa 8.0.5
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros AR8132 Fast Ethernet driver: atl1c
IF: eth0 state: down mac: 00:23:5a:d8:20:66
Card-2: Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
driver: ath5k
IF: wlan0 state: up mac: 00:24:2c:98:59:0d
Drives: HDD Total Size: 160.0GB (-)
ID-1: /dev/sda model: WDC_WD1600BEVT size: 160.0GB
Partition: ID-1: / size: 73G used: 2.8G (4%) fs: ext4 dev: /dev/sda3
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 26.8C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 199 Uptime: 9 days Memory: 324.4/998.6MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 10:40 am
by DBeckett
 
Three desktops.

Main rig:

Code: Select all

dale@mx14:~
$ inxi -F
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Gigabyte product: N/A
           Mobo: Gigabyte model: 990FXA-UD3 v: x.x Bios: American Megatrends v: FC date: 02/05/2013
CPU:       Hexa core AMD FX-6100 Six-Core (-MCP-) cache: 12288 KB 
           Clock Speeds: 1: 1400 MHz 2: 1400 MHz 3: 1400 MHz 4: 1400 MHz 5: 1400 MHz 6: 3300 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Turks [Radeon HD 6570]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz
           GLX Renderer: Gallium 0.4 on AMD TURKS GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI Turks/Whistler HDMI Audio [Radeon HD 6000 Series] 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: xx:xx:xx:xx:xx:xx
Drives:    HDD Total Size: 750.2GB (7.6% used) ID-1: /dev/sda model: ST500DM002 size: 500.1GB
           ID-2: /dev/sdb model: ST250DM000 size: 250.1GB
Partition: ID-1: / size: 15G used: 2.5G (18%) fs: ext4 dev: /dev/sdb8 
           ID-2: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Info:      Processes: 171 Uptime: 1 min Memory: 139.7/8073.2MB Client: Shell (bash) inxi: 2.1.18
Secondary rig:

Code: Select all

dale@mx14-llano:~
$ inxi -F
System:    Host: mx14-llano Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Gigabyte model: A55M-DS2 v: x.x Bios: American Megatrends v: FB date: 03/19/2013
CPU:       Dual core AMD A4-3400 APU with Radeon HD Graphics (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 2200 MHz 2: 800 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Device 9644 
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1440x900@59.9hz 
           GLX Renderer: Gallium 0.4 on AMD SUMO2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel 
           Card-2: Advanced Micro Devices [AMD] ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth0 state: down mac: xx:xx:xx:xx:xx:xx
           Card-2: Linksys WUSB54G v2 802.11g Adapter [Intersil ISL3887] driver: p54usb 
           IF: wlan0 state: up mac: xx:xx:xx:xx:xx:xx
Drives:    HDD Total Size: 320.1GB (-) 1: id: /dev/sda model: ST320DM000 size: 320.1GB 
Partition: ID: / size: 15G used: 2.6G (19%) fs: ext4 ID: swap-1 size: 4.36GB used: 0.00GB (0%) fs: swap 
Info:      Processes: 130 Uptime: 0 min Memory: 123.4/3526.9MB Client: Shell (bash) inxi: 2.1.7
Old Pavilion:

Code: Select all

dale@mx14:~
$ inxi -F
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: HP Pavilion 05 product: P9851A-ABA 523n v: 3000211RE101LONDO
           Mobo: N/A model: KM266-8233 Bios: Phoenix v: AM35306 date: 08/21/2002
CPU:       Single core AMD Athlon XP 2200+ (-UP-) cache: 256 KB clocked at 1798 MHz 
Graphics:  Card: NVIDIA NV44A [GeForce 6200] 
           Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1400x1050@60.0hz 
           GLX Renderer: Gallium 0.4 on NV4A GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: VIA VT8233/A/8235/8237 AC97 Audio Controller driver: snd_via82xx 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL-8139/8139C/8139C+ driver: 8139too 
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: xx:xx:xx:xx:xx:xx
Drives:    HDD Total Size: 160.0GB (-) 1: id: /dev/sda model: ST3160212A size: 160.0GB 
Partition: ID: / size: 21G used: 3.2G (16%) fs: ext4 ID: swap-1 size: 4.77GB used: 0.00GB (0%) fs: swap 
Info:      Processes: 107 Uptime: 1 min Memory: 118.0/1516.2MB Client: Shell (bash) inxi: 2.1.7
MX also runs very well on the ThinkPad in my sig.

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 11:14 am
by Jerry3904
Here is the non-PAE running very well on a Dell Inspiron 700m laptop (that I long loved)

Code: Select all

jb@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-486 i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 27 March 2014 
Machine:   System: Dell product: Inspiron 700m v: -1
           Mobo: DELL SYSTEM model: Inspiron 700m v: Rev.A
           Bios: Phoenix v: A02 date: 02/01/05
CPU:       Single core Intel Pentium M (-UP-) cache: 2048 KB clocked at 1600 MHz 
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device 
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@65.3hz 
           GLX Renderer: Mesa DRI Intel 852GM/855GM x86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-486
Network:   Card-1: Broadcom BCM4306 802.11b/g Wireless LAN Controller 
           IF: N/A state: N/A mac: N/A
           Card-2: Broadcom BCM4401-B0 100Base-TX 
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 40.0GB (1.9% used) 1: id: /dev/sda model: HTS548040M9AT00 size: 40.0GB 
Partition: ID: / size: 9.5G used: 2.4G (26%) fs: ext4 ID: swap-1 size: 1.21GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 55.0C mobo: 44.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 116 Uptime: 3 min Memory: 113.6/1245.8MB 
           Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 2:10 pm
by rokytnji.1
IBM M41 Wireless Desktop Tower. Motorcycle shop media center.

Code: Select all

$ inxi -Fxz
System:    Host: biker Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit, gcc: 4.6.3)
           Desktop: Xfce 4.10.2 (Gtk 2.24.10) Distro:  MX-14 Symbiosis 24 March 2014
Machine:   System: IBM product: 679421U
           Mobo: IBM model: IBM Bios: IBM version: 20KT46AUS date: 06/04/2004
CPU:       Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB flags: (pae sse sse2) bmips: 3588.66 clocked at 1794.332 MHz
Graphics:  Card: NVIDIA NV6 [Vanta/Vanta LT] bus-ID: 01:00.0
           X.Org: 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1024x768@85.0hz
           GLX Renderer: Mesa DRI nv05 x86/MMX/SSE2 GLX Version: 1.2 Mesa 8.0.5 Direct Rendering: Yes
Audio:     Card: Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0 ports: 1c00 1840 bus-ID: 00:1f.5
           Sound: Advanced Linux Sound Architecture ver: k3.12-0.bpo.1-686-pae
Network:   Card-1: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100 ver: 3.5.24-k2-NAPI port: 2000 bus-ID: 02:08.0
           IF: eth0 state: down mac: <filter>
           Card-2: Realtek RTL8187B Wireless 802.11g 54Mbps Network Adapter usb-ID: 001-002
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 200.1GB (18.1% used) 1: id: /dev/sda model: ST3160215ACE size: 160.0GB
           2: id: /dev/sdb model: IC35L040AVVA07 size: 40.0GB
Partition: ID: / size: 11G used: 2.5G (26%) fs: ext4 ID: /home size: 27G used: 8.8G (35%) fs: ext4
           ID: swap-1 size: 1.17GB used: 0.00GB (0%) fs: swap
Sensors:   System Temperatures: cpu: 27.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 124 Uptime: 1:01 Memory: 252.9/1134.5MB Runlevel: 5
           Gcc sys: 4.7.2 Client: Shell (bash 4.2.37) inxi: 2.1.7
AAO1 ZG5 9" Netbook.

Code: Select all

    
    $ inxi -Fxx
    System:    Host: biker Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit gcc: 4.6.3)
               Desktop: Xfce 4.10.2 (Gtk 2.24.10) dm: lightdm
               Distro: MX-14 Symbiosis 24 March 2014
    Machine:   System: Acer product: AOA150 v: 1
               Mobo: Acer model: N/A Bios: Acer v: v0.3310 date: 10/06/2008
    CPU:       Single core Intel Atom CPU N270 (-HT-) cache: 512 KB
               flags: (nx pae sse sse2 sse3 ssse3) bmips: 3191
               Clock Speeds: 1: 1600 MHz 2: 1066 MHz
    Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:27ae
               Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x600@60.0hz
               GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 GLX Version: 1.4 Mesa 8.0.5 Direct Rendering: Yes
    Audio:     Card: Intel NM10/ICH7 Family High Definition Audio Controller
               driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
               Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
    Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
               driver: r8169 v: 2.3LK-NAPI port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8136
               IF: eth0 state: down mac: 00:23:8b:15:f3:35
               Card-2: Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
               driver: ath5k bus-ID: 03:00.0 chip-ID: 168c:001c
               IF: wlan0 state: up mac: 00:23:4e:1f:7b:2b
    Drives:    HDD Total Size: 162.1GB (16.4% used)
               1: id: /dev/sda model: WDC_WD1600BEVT size: 160.0GB serial: WD-WXE908TWM179
               2: USB id: /dev/sdb model: U3_Cruzer_Micro size: 2.1GB serial: 0000183D8772331D-0:0
    Partition: ID: / size: 7.6G used: 2.7G (38%) fs: ext4 ID: /home size: 79G used: 9.4G (13%) fs: ext4
               ID: swap-1 size: 2.10GB used: 0.01GB (1%) fs: swap
    Sensors:   System Temperatures: cpu: 64.0C mobo: N/A
               Fan Speeds (in rpm): cpu: N/A
    Info:      Processes: 163 Uptime: 6:33 Memory: 459.1/994.9MB
               Init: SysVinit v: 2.88 runlevel: 5 default: 5
               Gcc sys: 4.7.2 alt: 4.6
               Client: Shell (bash 4.2.371 running in xfce4-terminal) inxi: 2.1.7
:anispider2:

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 2:31 pm
by worktowork
inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: MATE 1.6.0 Distro: MX-14_13.99_386-xfce RC2 09 March 2014
Machine: Mobo: N/A model: SiS-661 Bios: Phoenix v: 6.00 PG date: 02/26/2005
CPU: Single core Intel Celeron CPU (-UP-) cache: 256 KB
clocked at 2940 MHz
Graphics: Card: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
Display Server: X.Org 1.12.4 drivers: sis (unloaded: fbdev,vesa)
Resolution: 1024x768@85.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
GLX Version: 2.1 Mesa 8.0.5
Audio: Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller
driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
driver: sis900
IF: eth0 state: unknown speed: 100 Mbps duplex: full
mac: 92:e8:04:1f:31:10
Drives: HDD Total Size: 120.0GB (-)
ID-1: /dev/sda model: WDC_WD1200JB size: 120.0GB
Partition: ID-1: / size: 3.7G used: 2.8G (81%) fs: ext4 dev: /dev/sda6
Sensors: System Temperatures: cpu: 54.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 110 Uptime: 8 min Memory: 211.1/468.8MB
Client: Shell (bash) inxi: 2.1.20
In my hardware mate more stable than Xfce and I dist-upgrade my system , but information have not updated

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 2:45 pm
by chippy52
Desktop

$ inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: KDE 4.8.4 Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: ASUSTeK model: P8H67-M EVO v: Rev 1.xx
Bios: American Megatrends v: 2302 date: 02/16/2012
CPU: Quad core Intel Core i5-2400 CPU (-MCP-) cache: 6144 KB
Clock Speeds: 1: 1600 MHz 2: 2867 MHz 3: 1600 MHz 4: 2383 MHz
Graphics: Card: NVIDIA GF108 [GeForce GT 430]
Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz
GLX Renderer: Gallium 0.4 on NVC1 GLX Version: 3.0 Mesa 8.0.5
Audio: Card-1: NVIDIA GF108 High Definition Audio Controller driver: snd_hda_intel
Card-2: Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel
Card-3: Logitech Webcam C270 driver: USB Audio
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: bc:ae:c5:7c:47:15
Drives: HDD Total Size: 628.1GB (61.3% used) 1: id: /dev/sda model: ST3500413AS size: 500.1GB
2: id: /dev/sdb model: Samsung_SSD_840 size: 128.0GB
Partition: ID: / size: 15G used: 3.7G (27%) fs: ext4 ID: /home size: 9.5G used: 245M (3%) fs: ext4 ( boot drive )
Sensors: System Temperatures: cpu: 39.0C mobo: N/A gpu: 38.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 166 Uptime: 3 min Memory: 300.9/8094.4MB
Client: Shell (bash) inxi:

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 3:31 pm
by arjaybe
$ inxi -F
System: Host: riverhouse Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4
Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: ZOTAC model: ZBOX-AD04 v: XX Bios: American Megatrends v: 4.6.4 date: 02/21/2012
CPU: Dual core AMD E-450 APU with Radeon HD Graphics (-MCP-) cache: 1024 KB
Clock Speeds: 1: 1320 MHz 2: 825 MHz
Graphics: Card: Advanced Micro Devices [AMD] ATI Wrestler [Radeon HD 6320]
Display Server: X.Org 1.12.4 driver: radeon Resolution: 1920x1080@60.0hz
GLX Renderer: N/A GLX Version: N/A
Audio: Card-1 Advanced Micro Devices [AMD] ATI Wrestler HDMI Audio [Radeon HD 6250/6310]
driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
IF: wlan0 state: down mac: 00:08:ca:59:51:f6
Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:01:2e:40:aa:7b
Drives: HDD Total Size: 320.1GB (40.9% used) ID-1: /dev/sda model: TOSHIBA_MK3259GS size: 320.1GB
Partition: ID-1: / size: 16G used: 5.6G (38%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 2.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda8
Sensors: System Temperatures: cpu: 65.6C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 151 Uptime: 1:27 Memory: 566.3/5672.5MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 3:40 pm
by lucky9
Netbook

Code: Select all

lkh@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Acer model: Aspire one v: V1.06
           Bios: Acer v: V1.06 date: 06/11/2009
CPU:       Single core Intel Atom CPU N270 (-HT-) cache: 512 KB 
           Clock Speeds: 1: 800 MHz 2: 1600 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x600@60.0hz
           GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2
           GLX Version: 1.4 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros AR8132 Fast Ethernet driver: atl1c
           IF: eth0 state: down mac: 00:23:5a:f0:be:84
           Card-2: Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
           driver: ath5k
           IF: wlan0 state: down mac: 00:26:5e:3e:e1:2f
Drives:    HDD Total Size: 160.0GB (-)
           ID-1: /dev/sda model: ST9160310AS size: 160.0GB
Partition: ID-1: / size: 34G used: 6.4G (21%) fs: ext4 dev: /dev/sda5 
           ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 26.8C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 120 Uptime: 17 min Memory: 206.1/2014.6MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 3:44 pm
by male
Desktop

Code: Select all

inxi -F
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASUSTeK model: P4P800SE v: Rev 2.xx Bios: American Megatrends v: 080009 date: 01/27/2004
CPU:       Single core Intel Pentium 4 CPU (-HT-) cache: 512 KB 
           Clock Speeds: 1: 2798 MHz 2: 2798 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV280 [Radeon 9200]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Marvell 88E8001 Gigabit Ethernet Controller driver: skge
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 281.8GB (6.2% used) [size=85]ID-1: /dev/sdb model: Maxtor_6E030L0 size: 30.8GB[/size]
           ID-2: /dev/sda model: Maxtor_6L250R0 size: 251.0GB
Partition: ID-1: / size: 12G used: 2.5G (23%) fs: ext4 dev: /dev/sda10 
           ID-2: swap-1 size: 2.19GB used: 0.00GB (0%) fs: swap dev: /dev/sdb6 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 120 Uptime: 1:05 Memory: 196.8/2023.4MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 3:57 pm
by lucky9
Desktop

Code: Select all

Machine:   Mobo: Gigabyte model: 965G-DS3 version: x.x Bios: Award version: F9 date: 05/28/2007
CPU:       Dual core Intel Core2 CPU 6300 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 ssse3 vmx) 
           Clock Speeds: 1: 1866.784 MHz 2: 1866.784 MHz
Graphics:  Card: nVidia Device 0fc6 X.Org: 1.7.7 driver: nvidia Resolution: 1920x1080@60.0hz 
           GLX Renderer: GeForce GTX 650/PCIe/SSE2 GLX Version: 4.3.0 NVIDIA 310.19
Audio:     Card-1: Creative Labs SB Live! EMU10k1 driver: EMU10K1_Audigy Sound: ALSA ver: 1.0.23
           Card-2: nVidia Device 0e1b driver: HDA Intel 
Network:   Card: Failed to Detect Network Card! 
Drives:    HDD Total Size: 580.1GB (14.2% used) 1: id: /dev/sda model: WDC_WD5000AAKS size: 500.1GB 
           2: id: /dev/sdb model: WDC_WD800JD size: 80.0GB 
Partition: ID: / size: 20G used: 5.7G (31%) fs: ext4 ID: /home size: 48G used: 18G (39%) fs: ext4 
           ID: swap-1 size: 2.37GB used: 0.33GB (14%) fs: swap 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 189 Uptime: 6 days Memory: 1637.1/3965.5MB Client: Shell (bash) inxi: 1.9.12

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 3:58 pm
by Jerry3904
People are forgetting to tell anti whether desktop or laptop

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 5:25 pm
by lucky9
Desktop

Code: Select all

lkh@mx14:~
$ inxi -F
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Gateway product: E-3600 v: 4000777
           Mobo: Intel model: D845PT v: AAA65253-303
           Bios: Intel v: PT84510A.15A.0004.P02.0112051220 date: 12/05/2001
CPU:       Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB clocked at 1594 MHz 
Graphics:  Card: Advanced Micro Devices [AMD] ATI Radeon R200 QL [Radeon 8500 LE] 
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1280x1024@75.0hz 
           GLX Renderer: Mesa DRI R200 (R200 514C) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card: Creative Labs SB0400 Audigy2 Value driver: snd_emu10k1 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card: Ralink RT2561/RT61 802.11g PCI driver: rt61pci 
           IF: wlan0 state: down mac: 00:18:f8:a3:d3:f3
Drives:    HDD Total Size: 50.0GB (-) 1: id: /dev/sda model: ST320410A size: 20.0GB 
           2: id: /dev/sdb model: QUANTUM_FIREBALL size: 30.0GB 
Partition: ID: / size: 17G used: 2.4G (16%) fs: ext4 ID: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 113 Uptime: 5 min Memory: 196.4/627.0MB 
           Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 5:42 pm
by richb
Laptop
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Acer product: Aspire V5-572G v: V2.06
Mobo: Acer model: Dazzle_CX v: Type2 - A01 Board Version Bios: Insyde v: V2.06 date: 05/22/2013
CPU: Dual core Intel Core i5-3337U CPU (-HT-MCP-) cache: 3072 KB
Clock Speeds: 1: 2229 MHz 2: 2161 MHz 3: 2209 MHz 4: 2595 MHz
Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller
Card-2: NVIDIA Device 1140
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Mesa DRI Intel Ivybridge Mobile x86/MMX/SSE2 GLX Version: 3.0 Mesa 8.0.5
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: down mac: 08:9e:01:a4:28:8e
Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
IF: wlan0 state: up mac: 2c:d0:5a:eb:3e:cc
Drives: HDD Total Size: 564.1GB (10.5% used) ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB
USB ID-2: /dev/sdb model: USB_3.0_FD size: 64.0GB
Partition: ID-1: / size: 123G used: 34G (29%) fs: ext4 dev: /dev/sda3
Sensors: System Temperatures: cpu: 60.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 209 Uptime: 5:58 Memory: 908.6/12053.6MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 6:36 pm
by NGIB
Laptop:

Code: Select all

System:    Host: tsh Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: TOSHIBA product: Satellite A505 v: PSAT6U-005002
           Mobo: TOSHIBA model: Portable PC
           Bios: INSYDE v: 1.40 date: 08/31/2010
CPU:       Dual core Intel Core i3 CPU M 330 (-HT-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 933 MHz 2: 933 MHz 3: 933 MHz 4: 933 MHz
Graphics:  Card: Intel Core Processor Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Ironlake Mobile x86/MMX/SSE2
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel 5 Series/3400 Series High Definition Audio 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8191SEvB Wireless LAN Controller
           driver: rtl8192se
           IF: wlan0 state: up mac: 70:1a:04:ab:df:91
           Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
           driver: r8169
           IF: eth0 state: down mac: 00:26:6c:3a:94:89
Drives:    HDD Total Size: 500.1GB (-)
           ID-1: /dev/sda model: WDC_WD5000BEVT size: 500.1GB
Partition: ID-1: / size: 99G used: 2.7G (3%) fs: ext4 dev: /dev/sda3 
           ID-2: swap-1 size: 4.61GB used: 0.00GB (0%) fs: swap dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 52.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 154 Uptime: 4 min Memory: 254.5/3848.1MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 6:54 pm
by JimC
Desktop:

Code: Select all

System:    Host: jimmx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: XPS 8500
           Mobo: Dell model: 0NW73C v: A01 Bios: Dell v: A12 date: 08/28/2013
CPU:       Quad core Intel Core i7-3770 CPU (-HT-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 2709 MHz 2: 1599 MHz 3: 1814 MHz 4: 1899 MHz 5: 1708 MHz 6: 2041 MHz 7: 2028 MHz 8: 2123 MHz
Graphics:  Card: NVIDIA GK107 [GeForce GT 640] 
           Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1680x1050@60.0hz 
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1: Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel 
           Card-2: NVIDIA Device 0e1b driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller 
           driver: r8169 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: b8:ca:3a:77:4d:86
           Card-2: Atheros AR9485 Wireless Network Adapter driver: ath9k 
           IF: wlan0 state: down mac: 1c:3e:84:ab:9b:ef
           Card-3: Atheros 
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 2128.4GB (0.1% used) 1: id: /dev/sda model: SAMSUNG_SSD_830 size: 128.0GB 
           2: id: /dev/sdb model: ST2000DM001 size: 2000.4GB 
Partition: ID: / size: 4.9G used: 2.7G (61%) fs: btrfs 
           ID: swap-1 size: 1.07GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 40.0C mobo: 29.8C gpu: 33.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 205 Uptime: 4 min Memory: 278.7/12141.3MB 
           Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 7:18 pm
by JimC
Netbook:

Code: Select all

System:    Host: mx1netbook Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Dell model: 0T644R v: A03 Bios: Dell v: A03 date: 08/12/2009
CPU:       Single core Intel Celeron CPU 743 (-UP-) cache: 1024 KB clocked at 1296 MHz 
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller 
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.1hz 
           GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros AR8132 Fast Ethernet driver: atl1c 
           IF: eth0 state: down mac: 00:24:e8:f2:d3:df
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: wl 
           IF: wlan0 state: up mac: 00:23:08:cd:04:14
Drives:    HDD Total Size: 160.0GB (1.9% used) 1: id: /dev/sda model: WDC_WD1600BEVT size: 160.0GB 
Partition: ID: / size: 25G used: 2.8G (13%) fs: btrfs ID: swap-1 size: 2.05GB used: 0.03GB (1%) fs: swap 
           ID: swap-2 size: 2.07GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 54.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 134 Uptime: 8 days Memory: 209.0/1954.1MB 
           Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 7:58 pm
by uncle mark
Antique Dell Latitude C600 laptop circa 2001:

Code: Select all


nexdoor@mx-14:~
$ inxi -F
System:    Host: mx-14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Dell model: Latitude C600 Bios: Dell v: A21 date: 04/12/2001
CPU:       Single core Pentium III (Coppermine) (-UP-) cache: 256 KB clocked at 601 MHz 
Graphics:  Card: Advanced Micro Devices [AMD] ATI Rage Mobility M3 AGP 2x
           Display Server: X.Org 1.12.4 drivers: ati (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.0hz
           GLX Renderer: Gallium 0.4 on softpipe GLX Version: 2.1 Mesa 8.0.5
Audio:     Card ESS ES1983S Maestro-3i PCI Audio Accelerator driver: snd_maestro3 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8180L 802.11b MAC driver: rtl8180
           IF: wlan0 state: up mac: 00:90:47:07:48:a1
           Card-2: 3Com 3c556 Hurricane CardBus [Cyclone] driver: 3c59x
           IF: eth0 state: down mac: 00:04:76:46:d4:2e
Drives:    HDD Total Size: 20.0GB (8.1% used) ID-1: /dev/sda model: HITACHI_DK23CA size: 20.0GB
Partition: ID-1: / size: 5.7G used: 2.6G (48%) fs: ext3 dev: /dev/sda1 
           ID-2: /home size: 12G used: 1.6G (14%) fs: ext3 dev: /dev/sda6 
           ID-3: swap-1 size: 1.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 34.5C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 113 Uptime: 3 min Memory: 169.0/500.5MB Client: Shell (bash) inxi: 2.1.18 
nexdoor@mx-14:~
$

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 8:37 pm
by entropyfoe
As the sig reads, I am dual booting with Mepis12 beta 2 fully updated.
M12 runs stable for weeks at a time, except the occasional iceweasel crash. ;-}
MX-14 , so far testing.... seems stable so far.
Specs for this Desk Top computer:

Code: Select all

System:    Host: X8 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASUSTeK model: SABERTOOTH 990FX R2.0 v: Rev 1.xx
           Bios: American Megatrends v: 1302 date: 11/14/2012
CPU:       Octa core AMD FX-8320 Eight-Core (-MCP-) cache: 16384 KB 
           Clock Speeds: 1: 3511 MHz 2: 3511 MHz 3: 3511 MHz 4: 3511 MHz 5: 3511 MHz 6: 3511 MHz 7: 3511 MHz 8: 3511 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] 
           Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz 
           GLX Renderer: Gallium 0.4 on NVA8 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1: Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Card-2: NVIDIA High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller 
           driver: r8169 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: b7:ca:3a:77:4c:87 
Drives:    HDD Total Size: 1128.2GB (44.2% used) 1: id: /dev/sda model: OCZ size: 128.0GB 
           2: id: /dev/sdb model: WDC_WD1002FAEX size: 1000.2GB 
Partition: ID: / size: 69G used: 3.1G (5%) fs: ext4 ID: swap-1 size: 18.10GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 18.2C mobo: N/A gpu: 35.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 184 Uptime: 1 min Memory: 245.5/16139.3MB 
           Client: Shell (bash) inxi: 2.1.7
MX-14 benchmarks [added May 15]
CPU Cryptohash Results 768.90 THis Machine 3512 MHz
CPU BlowfishResults 1.75 seconds This Machine 3512 MHz
CPU Fibonacci Results 2.57 seconds
CPU N Queens Result 0.50 seconds
FPU FFT Result 1.25 seconds
FPU Ray Tracing 21.21 seconds

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 8:41 pm
by uncle mark
Two year old Acer Aspire laptop:

Code: Select all


nexdoor@MX-14-acer:~
$ inxi -F
System:    Host: MX-14-acer Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Acer model: Aspire 5250 v: V1.01 Bios: Acer v: V1.01 date: 04/21/2011
CPU:       Dual core AMD C-50 (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 800 MHz 2: 800 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Wrestler [Radeon HD 6250] 
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: Gallium 0.4 on AMD PALM GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k 
           IF: wlan0 state: up mac: 68:a3:c4:d9:24:52
           Card-2: Atheros AR8152 v2.0 Fast Ethernet driver: atl1c 
           IF: eth0 state: down mac: b8:70:f4:89:78:30
Drives:    HDD Total Size: 160.0GB (-) 1: id: /dev/sda model: ST9160821AS size: 160.0GB 
Partition: ID: / size: 31G used: 5.4G (19%) fs: ext4 ID: swap-1 size: 5.24GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 48.1C mobo: N/A gpu: 48.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 122 Uptime: 1 min Memory: 131.5/3777.5MB Client: Shell (bash) inxi: 2.1.7 
nexdoor@MX-14-acer:~
$

Re: Post your hardware specs.

Posted: Tue Apr 15, 2014 8:46 pm
by jdmeaux1952
Laptop as follows:

Code: Select all

# inxi -F
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: MICRO-STAR model: MS-16D3 v: REV:1.0 serial: BSS-0123456789
           Bios: American Megatrends v: E16D3IMR.10B date: 06/01/2010
CPU:       Dual core Intel Core i5 CPU M 450 (-HT-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1199 MHz 2: 1199 MHz 3: 1199 MHz 4: 1199 MHz
Graphics:  Card: Intel Core Processor Integrated Graphics Controller
           Display Server: X.org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           tty size: 112x27 Advanced Data: N/A for root
Audio:     Card Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
           IF: wlan0 state: up mac: 74:f0:6d:32:de:66
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: down mac: 40:61:86:af:d7:2a
Drives:    HDD Total Size: 500.1GB (-) ID-1: /dev/sda model: Hitachi_HTS54505 size: 500.1GB
Partition: ID-1: / size: 16G used: 8.7G (59%) fs: ext4 dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 154 Uptime: 1:58 Memory: 300.8/3843.3MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Wed Apr 16, 2014 2:22 am
by james c
Desktop:

Code: Select all

james@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ECS model: GeForce7050M-M v: 1.0
           Bios: American Megatrends v: 080014 date: 05/30/2008
CPU:       Dual core AMD Athlon 64 X2 3800+ (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 1000 MHz 2: 1000 MHz
Graphics:  Card: NVIDIA C68 [GeForce 7050 PV / nForce 630a]
           Display Server: X.Org 1.12.4 driver: nvidia
           Resolution: 1440x900@59.9hz
           GLX Renderer: GeForce 7050 PV / nForce 630a/integrated/SSE2/3DNOW!
           GLX Version: 2.1.2 NVIDIA 304.117
Audio:     Card NVIDIA MCP67 High Definition Audio driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: NVIDIA MCP67 Ethernet driver: forcedeth
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:1e:90:fe:92:50
Drives:    HDD Total Size: 250.1GB (-)
           ID-1: /dev/sda model: ST3250318AS size: 250.1GB
Partition: ID-1: / size: 16G used: 3.0G (21%) fs: ext4 dev: /dev/sda7 
           ID-2: swap-1 size: 6.40GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 30.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 125 Uptime: 2 min Memory: 318.7/3793.7MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Wed Apr 16, 2014 3:10 am
by Gaer Boy
Fascinating selection. I'm looking forward to seeing the results of this survey :-)

Re: Post your hardware specs.

Posted: Wed Apr 16, 2014 4:35 am
by NGIB
Laptop:

Code: Select all

System:    Host: btn Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Compal product: PBL21 v: 1.71
           Mobo: Compal model: PBL21 Bios: INSYDE v: 1.71 date: 04/19/2011
CPU:       Quad core Intel Core i7-2670QM CPU (-HT-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 1890 MHz 2: 997 MHz 3: 1203 MHz 4: 1334 MHz
           5: 1304 MHz 6: 799 MHz 7: 2599 MHz 8: 1089 MHz
Graphics:  Card: NVIDIA GF108 [GeForce GT 540M]
           Display Server: X.Org 1.12.4 driver: nvidia
           Resolution: 1920x1080@60.0hz
           GLX Renderer: GeForce GT 540M/PCIe/SSE2
           GLX Version: 4.3.0 NVIDIA 319.82
Audio:     Card-1 NVIDIA GF108 High Definition Audio Controller 
           driver: snd_hda_intel 
           Card-2 Intel 6 Series/C200 Series Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth1 state: down mac: b8:70:f4:a0:44:83
           Card-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
           driver: rtl8192ce
           IF: wlan1 state: up mac: e0:b9:a5:b2:c6:80
Drives:    HDD Total Size: 266.1GB (0.4% used)
           ID-1: /dev/sda model: ST9250410AS size: 250.1GB
           USB ID-2: /dev/sdb model: Cruzer_Glide size: 16.0GB
Partition: ID-1: / size: 226G used: 4.4G (3%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 4.08GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 51.0C mobo: N/A gpu: 51C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 187 Uptime: 18 min Memory: 524.1/8092.1MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Wed Apr 16, 2014 5:52 am
by Utopia
Laptop

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-486 i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 27 March 2014 
Machine:   System: IBM product: 2374FG4 v: ThinkPad T41
           Mobo: IBM model: 2374FG4
           Bios: IBM v: 1RETDRWW (3.23 ) date: 06/18/2007
CPU:       Single core Intel Pentium M (-UP-) cache: 1024 KB clocked at 1200 MHz 
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV200 [Mobility Radeon 7500] 
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1024x768@60.0hz 
           GLX Renderer: Mesa DRI R100 (RV200 4C57) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-486
Network:   Card-1: Intel 82540EP Gigabit Ethernet Controller (Mobile) 
           driver: e1000 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:0d:60:76:c6:ad
           Card-2: Atheros AR5212 802.11abg NIC driver: ath5k 
           IF: wlan0 state: down mac: 00:05:4e:49:b0:62
Drives:    HDD Total Size: 40.0GB (0.1% used) 1: id: /dev/sda model: HTS548040M9AT00 size: 40.0GB 
Partition: ID: / size: 9.5G used: 2.4G (27%) fs: ext4 ID: /home size: 26G used: 45M (1%) fs: ext4 
           ID: swap-1 size: 2.11GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 44.0C mobo: 41.0C 
           Fan Speeds (in rpm): cpu: N/A fan-1: 3580 
Info:      Processes: 111 Uptime: 1 min Memory: 119.4/1008.2MB 
           Client: Shell (bash) inxi: 2.1.7
Henry

Re: Post your hardware specs.

Posted: Wed Apr 16, 2014 12:14 pm
by Richard
Four year old AA1 netbook

Code: Select all

$ inxi -b
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: Acer model: Aspire one v: V1.27
           Bios: Acer v: V1.27 date: 03/01/2010
CPU:       Single core Intel Atom CPU N270 (-HT-) clocked at 800 MHz 
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x600@60.1hz
           GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2
           GLX Version: 1.4 Mesa 8.0.5
Network:   Card-1: Atheros AR8132 Fast Ethernet driver: atl1c
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
Drives:    HDD Total Size: 160.0GB (43.1% used) 
Info:      Processes: 133 Uptime: 15 min Memory: 240.9/998.6MB 
           Client: Shell (bash) inxi: 2.1.18 
richard@mx14:~

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 7:34 am
by dolphin_oracle
HP machine running liveUSB /w persistence

Code: Select all

demo@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Hewlett-Packard product: HP Pavilion dm4 Notebook PC v: 0587110002242B10000022100
           Mobo: Hewlett-Packard model: 146A v: 58.28 Bios: Hewlett-Packard v: F.26 date: 02/14/2011
CPU:       Dual core Intel Core i5 CPU M 460 (-HT-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1199 MHz 2: 1199 MHz 3: 1199 MHz 4: 1199 MHz
Graphics:  Card: Intel Core Processor Integrated Graphics Controller 
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: Mesa DRI Intel Ironlake Mobile x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Intel Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] driver: iwlwifi 
           IF: wlan0 state: up mac: 00:23:15:7b:a8:14
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169 
           IF: eth0 state: down mac: 64:31:50:6d:81:b4
Drives:    HDD Total Size: 328.1GB (0.9% used) 1: id: /dev/sda model: WDC_WD3200BPVT size: 320.1GB 
           2: USB id: /dev/sdb model: Cruzer_Glide size: 8.0GB 
Partition: ID: / size: 1008M used: 441M (46%) fs: rootfs ID: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 43.0C mobo: 42.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 169 Uptime: 9 min Memory: 389.2/7906.6MB Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 7:35 am
by Jerry3904
<note to self: try the persistence!>

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 8:04 am
by dolphin_oracle
Same liveUSB , different machine, a dell optiplex 780 with 4gb ram, but only 3 available due to shared video ram. I was surprised that the strange little proprietary Dell pci WIFI card (with Broadcom 4321) actually works.

Code: Select all

demo@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: OptiPlex 780
           Mobo: Dell model: 0C27VV v: A01 Bios: Dell v: A04 date: 04/30/2010
CPU:       Dual core Intel Core2 Duo CPU E7500 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1600 MHz 2: 1600 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller 
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz 
           GLX Renderer: Mesa DRI Intel Q45/Q43 x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: Intel 82801JD/DO (ICH10 Family) HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Broadcom BCM4321 802.11a/b/g/n driver: wl 
           IF: wlan1 state: up mac: 5c:ac:4c:87:a2:7f
           Card-2: Intel 82567LM-3 Gigabit Network Connection driver: e1000e 
           IF: eth1 state: up speed: 100 Mbps duplex: full mac: b8:ac:6f:4c:a5:66
Drives:    HDD Total Size: 258.0GB (1.1% used) 1: id: /dev/sda model: WDC_WD2500AAJS size: 250.0GB 
           2: USB id: /dev/sdb model: Cruzer_Glide size: 8.0GB 
Partition: ID: / size: 1008M used: 446M (47%) fs: rootfs 
Sensors:   System Temperatures: cpu: 33.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 143 Uptime: 1 min Memory: 258.2/3004.1MB Client: Shell (bash) inxi: 2.1.7 
demo@mx1:~

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 10:38 am
by dolphin_oracle
special treat, acer c720 chromebook, running mx14 live w/ persistence.

by default, audio and the touchpad do not work. wireless works straight away (thank you acer for putting an atheros chipset in this thing instead of broadcom).

Code: Select all

demo@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Acer product: Peppy v: 1.0
           Mobo: N/A model: N/A Bios: coreboot v: N/A date: 10/29/2013
CPU:       Dual core Intel Celeron 2955U (-MCP-) cache: 2048 KB 
           Clock Speeds: 1: 1400 MHz 2: 1400 MHz
Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller 
           Display Server: X.Org 1.12.4 drivers: fbdev,vesa (unloaded: intel) Resolution: 1366x768@0.0hz 
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1: Intel Lynx Point-LP HD Audio Controller driver: snd_hda_intel 
           Card-2: Intel Device 0a0c driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card: Atheros AR9462 Wireless Network Adapter driver: ath9k 
           IF: wlan2 state: up mac: 48:5a:b6:61:90:ef
Drives:    HDD Total Size: 24.0GB (25.4% used) 1: id: /dev/sda model: KINGSTON_SNS4151 size: 16.0GB 
           2: USB id: /dev/sdb model: Cruzer_Glide size: 8.0GB 
Partition: ID: / size: 976M used: 23M (3%) fs: rootfs 
Sensors:   System Temperatures: cpu: 41.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 125 Uptime: 3 min Memory: 155.8/1948.5MB Client: Shell (bash) inxi: 2.1.7 
demo@mx1:~
$
much faster than the old netbook.

I hear that the 3.14 kernel may have support for the hardware in this chromebook. I am not going to install onto the chromebook, but the option for a real os from USB is pretty sweet, in a pinch.

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 10:45 am
by JimC
I think I've got the record for a system using MX-14 that's actually being used with it so far (up time) compared to other user posting info so far, versus booting into MX-14 to post the info in this thread. :-)

See the "Info" section at the bottom of the results for a little Dell Inspiron 11Z Netbook in my post here:

http://forum.mepiscommunity.org/viewtop ... 30#p337130

Up time was 8 days at the time of the post (and it's longer by now). My wife's great niece (her sister's daughter's daughter) has been visiting with us, and I've been letting her use that netbook, and I setup a user account under MX-14 just for her on it. It doesn't look like she's bothered to reboot it since I gave it to her setup that way. :-)

I do see that it's running hot (noticed it when running inxi - F). So, I probably need to try adding pcie_acpm=force to the kernel boot line to see if that solves it. Here's a post about that option:

http://forum.mepiscommunity.org/viewtop ... 43#p336043

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 11:20 am
by anticapitalista
Peregrine had 11 days in her post on the first page and Jerry 9 days.

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 11:42 am
by JimC
My bad. I must have skimmed the results too fast.

In any any event, it's a reliable build for sure.

Our [great] niece (my wife's sister's daughter's daughter) has been using MX-14 with that Dell Inspiron 11Z netbook with no issues at all, and I doubt she's ever used another Operating System besides Windows before in her life, yet she's had no problems adjusting to it.

I did install a few extras on it (for example, I installed Firefox immediately, since I am definitely *not* a Qupzilla fan). But, other than a few minor tweaks I made like that, it's been working great for her.

She's been attending classes on Phlebotomy here locally in Savannah while staying with us (we setup a spare room for her while she's here), and has even been using Firefox for some of the online sessions they've been having via Cisco WebEX (in addition to the classroom based courses she's required to attend that they hold each Saturday, they have online classes during the week). See more about that product here:

http://www.webex.com/

Even something as complex as that product has been working just fine in Firefox under MX-14 (with nothing other than OpenJDK using the Iced Tea extension needed for her to participate in those online sessions her classes require from her). The built in Web Cam on that Dell Inspiron 11Z netbook is even working. I'm impressed.

I've got it setup in a dual boot config with 64 Bit Win 7 (what Dell shipped on it) and MX-14 right now; and I thought I might need to let her use Windows 7 with IE (using special ActiveX based WebEx plugins) to get the WebEx sessions to work with it (as I had no luck getting WebEx to work with Mepis 11 on it; which is one reason I replaced it's Mepis 11 installation with MX-14 to see if MX-14 would work, and it does).

With MX-14 installed, I did not need to resort to letting her use IE with Win 7 for those online sessions, as just using Firefox with MX-14 has been working great with Cisco WebEx (using IcedTea and OpenJDK from Firefox). So, there's been no need for me to jump through hoops and try to set up a limited user account under Win 7 for her to use for the online sessions her classes require during the week instead.

So, great work guys (especially anticapitalista and other developers helping out) for handling all of the hard detail stuff in getting the XFCE desktop and all of the apps to work together with a distro as "lean and mean" as MX-14), as it's running great on a slow single core Celeron CPU like that netbook is using, and it's so easy to use, that someone with *no* linux experience like our Great Niece is having no issues using it.

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 8:48 pm
by Old Giza
Approx. 10 year old desktop.

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASUSTeK model: P4B533 v: REV 1.xx
           Bios: Award v: ASUS P4B533 1006 date: 05/24/2002
CPU:       Single core Intel Pentium 4 CPU (-UP-) cache: 512 KB clocked at 1817 MHz 
Graphics:  Card: NVIDIA NV34 [GeForce FX 5200]
           Display Server: X.Org 1.12.4 driver: nvidia Resolution: 1024x768@50.0hz
           GLX Renderer: GeForce FX 5200/AGP/SSE2 GLX Version: 2.1.2 NVIDIA 173.14.39
Audio:     Card-1 C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci 
           Card-2 Creative Labs SB Audigy driver: snd_emu10k1 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL-8139/8139C/8139C+ driver: 8139too
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:18:e7:08:25:57
Drives:    HDD Total Size: 160.1GB (-) ID-1: /dev/sda model: MAXTOR_6L080L4 size: 80.1GB
           ID-2: /dev/sdb model: WDC_WD800JB size: 80.0GB
Partition: ID-1: / size: 5.1G used: 2.8G (58%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 0.80GB used: 0.00GB (0%) fs: swap dev: /dev/sdb8 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 106 Uptime: 5 min Memory: 136.6/1516.2MB 
           Client: Shell (bash) inxi: 2.1.18
Thank you to all the people who worked so hard to bring this very useful product to fruition. I'm sure 100 times more went on behind the scenes than is visible here. I've been a happy Mepis user for awhile, but MX-14 seems even more in tune with my needs - great performance on low spec hardware without sacrificing capability or ease of use. I hope it gets the exposure and accolades it deserves.

Re: Post your hardware specs.

Posted: Thu Apr 17, 2014 9:11 pm
by lucky9
Welcome to the forum Old Giza! :welcome:

Re: Post your hardware specs.

Posted: Fri Apr 18, 2014 4:59 am
by NGIB
Smallest laptop:

Code: Select all

System:    Host: dm1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Hewlett-Packard product: HP Pavilion dm1 Notebook PC v: 0587100002252B00000320100
           Mobo: Hewlett-Packard model: 1611 v: 96.3A
           Bios: Hewlett-Packard v: F.13 date: 07/07/2011
CPU:       Dual core AMD E-350 (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 1280 MHz 2: 1280 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Wrestler [Radeon HD 6310]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.0hz
           GLX Renderer: Gallium 0.4 on AMD PALM GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 
           driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Ralink RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip]
           driver: rt2800pci
           IF: wlan1 state: up mac: ec:55:f9:9b:d1:35
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth1 state: down mac: 2c:27:d7:a5:b6:51
           Card-3: Ralink
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 257.8GB (1.5% used)
           ID-1: /dev/sda model: Hitachi_HTS72322 size: 250.1GB
           USB ID-2: /dev/sdb model: DT_100_G2 size: 7.7GB
Partition: ID-1: / size: 228G used: 2.7G (2%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 56.9C mobo: N/A gpu: 58.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 132 Uptime: 5 min Memory: 164.6/2637.5MB 
           Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Fri Apr 18, 2014 11:01 am
by Paul..
Laptop - Dell Latitude XT2

Code: Select all

$ inxi -F
System:    Host: Kitchen Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: Latitude XT2
           Mobo: Dell model: 0M643F Bios: Dell v: A05 date: 11/09/2009
CPU:       Dual core Intel Core2 Duo CPU U9400 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 800 MHz 2: 1200 MHz
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller 
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@60.1hz 
           GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network:   Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: wl 
           IF: wlan0 state: up mac: 00:24:2b:81:7a:d7
           Card-2: Intel 82567LM Gigabit Network Connection driver: e1000e 
           IF: eth0 state: down mac: 00:23:ae:22:88:c8
Drives:    HDD Total Size: 64.0GB (-) 1: id: /dev/sda model: SAMSUNG_SSD_1.8 size: 64.0GB 
Partition: ID: / size: 57G used: 3.4G (7%) fs: ext4 ID: swap-1 size: 2.17GB used: 0.02GB (1%) fs: swap 
Sensors:   System Temperatures: cpu: 47.5C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 148 Uptime: 20 days Memory: 974.8/2992.8MB Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Sat Apr 19, 2014 3:03 pm
by reidun
Here's the specs from my Dell Inspiron 1525 laptop:

System: Host: Inspiron Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Dell product: Inspiron 1525
Mobo: Dell model: 0U990C Bios: Dell v: A17 date: 10/27/2009
CPU: Single core Intel Celeron CPU 550 (-UP-) cache: 1024 KB clocked at 1994 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1280x800@60.0hz
GLX Renderer: Mesa DRI Intel 965GM x86/MMX/SSE2
GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
IF: wlan0 state: dormant mac: 00:22:69:61:e6:7f
Card-2: Marvell 88E8040 PCI-E Fast Ethernet Controller driver: sky2
IF: eth0 state: up speed: 100 Mbps duplex: full
mac: 00:21:9b:e6:58:b3
Drives: HDD Total Size: 120.2GB (42.5% used)
ID-1: /dev/sda model: Hitachi_HTS54251 size: 120.0GB
USB ID-2: /dev/sdb model: Flash_Disk size: 0.1GB
Partition: ID-1: / size: 39G used: 4.5G (13%) fs: ext4 dev: /dev/sda5
ID-2: /home size: 41G used: 23G (60%) fs: ext4 dev: /dev/sda3
ID-3: swap-1 size: 4.19GB used: 0.06GB (1%) fs: swap dev: /dev/sda6
Sensors: System Temperatures: cpu: 60.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 11 days Memory: 1862.6/4042.6MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Sat Apr 19, 2014 7:28 pm
by zarg2
System: Host: media Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit gcc: 4.6.3)
Desktop: Xfce 4.10.2 (Gtk 2.24.10)
Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Dell product: Dimension 4700
Mobo: Dell model: 0M3918 Bios: Dell v: A10 date: 01/04/2006
CPU: Single core Intel Pentium 4 CPU (-HT-) cache: 1024 KB
flags: (nx pae sse sse2 sse3) bmips: 5585
Clock Speeds: 1: 2792 MHz 2: 2792 MHz
Graphics: Card: Intel 82915G/GV/910GL Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Mesa DRI Intel 915G x86/MMX/SSE2
GLX Version: 1.4 Mesa 8.0.5 Direct Rendering: Yes
Audio: Card-1 Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
driver: snd_intel8x0 ports: ec00 e8c0 bus-ID: 00:1e.2
Card-2 Logitech QuickCam Communicate STX
driver: USB Audio usb-ID: 003-002
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Intel 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller
driver: e100 v: 3.5.24-k2-NAPI port: dcc0 bus-ID: 03:08.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 240.0GB (-)
ID-1: /dev/sda model: WDC_WD800JD size: 80.0GB
ID-2: /dev/sdb model: WDC_WD1600AAJS size: 160.0GB
Partition: ID-1: / size: 72G used: 9.1G (14%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 126 Uptime: 2:14 Memory: 224.0/1506.5MB
Init: SysVinit runlevel: 5 Gcc sys: 4.7.2
Client: Shell (bash 4.2.371) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Sat Apr 19, 2014 8:19 pm
by PhilH
Laptop

System: Host: AntiMX Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Acer product: Aspire 3000
Mobo: Acer model: Lugano M Bios: Acer v: 3A21 date: 06/10/05
CPU: Single core Mobile AMD Sempron 3000+ (-UP-) cache: 128 KB clocked at 800 MHz
Graphics: Card: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
Display Server: X.Org 1.12.4 drivers: sis (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
GLX Version: 2.1 Mesa 8.0.5
Audio: Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller
driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Broadcom BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
driver: b43-pci-bridge
IF: wlan0 state: up mac: 00:0e:9b:d5:38:13
Card-2: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
driver: sis900
IF: eth0 state: down mac: 00:c0:9f:a4:cc:66
Drives: HDD Total Size: 280.1GB (0.0% used)
ID-1: /dev/sda model: SAMSUNG_HM160HC size: 160.0GB
ID-2: /dev/sdb model: 3AS size: 120.0GB
Partition: ID-1: / size: 70G used: 4.7G (8%) fs: ext4 dev: /dev/sda3
ID-2: swap-1 size: 2.17GB used: 0.03GB (1%) fs: swap dev: /dev/sda2
ID-3: swap-2 size: 3.73GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
Sensors: System Temperatures: cpu: 48.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 140 Uptime: 8:54 Memory: 402.5/1134.2MB
Client: Shell (bash) inxi: 2.1.18

Phil
(inNC)

Other partition on HD is AntiX 13.2

Re: Post your hardware specs.

Posted: Sun Apr 20, 2014 4:11 pm
by whell
I've got MX installed on a couple of laptops here. This one: HP Pavillion dv2000:

CPU: Dual core Intel Core2 Duo CPU T7250 (-MCP-) cache: 2048 KB
Clock Speeds: 1: 1600 MHz 2: 800 MHz
CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts est flexpriority
fpu fxsr ht ida lahf_lm lm mca mce mmx monitor msr mtrr nx pae pat
pbe pdcm pebs pge pni pse pse36 sep ss sse sse2 ssse3 tm tm2
tpr_shadow tsc vme vmx vnmi xtpr

Re: Post your hardware specs.

Posted: Mon Apr 28, 2014 9:06 am
by MX-tester
Asus EeeBox connected to an old IDE 20gb 2.5" disk in an external USB enclosure. (17" Acer TFT)

System: Host: mx-20gb Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: ASUSTeK model: EB1007 v: Rev 1.xx Bios: American Megatrends v: 0701 date: 02/18/2011
CPU: Single core Intel Atom CPU D410 (-HT-) cache: 512 KB
Clock Speeds: 1: 1666 MHz 2: 1666 MHz
Graphics: Card: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
GLX Renderer: Mesa DRI Intel IGD x86/MMX/SSE2 GLX Version: 1.4 Mesa 8.0.5
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
IF: wlan1 state: up mac: e0:b9:a5:cc:6c:f3
Card-2: JMicron JMC250 PCI Express Gigabit Ethernet Controller driver: jme
IF: eth1 state: down mac: f4:6d:04:4f:32:a4
Drives: HDD Total Size: 20.0GB (-) ID-1: /dev/sda model: MK2018GAP size: 20.0GB
Partition: ID-1: / size: 19G used: 5.3G (30%) fs: ext4 dev: /dev/sda1
Sensors: System Temperatures: cpu: 26.0C mobo: 22.0C
Fan Speeds (in rpm): cpu: 2755
Info: Processes: 126 Uptime: 34 min Memory: 219.4/998.8MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Mon Apr 28, 2014 9:15 am
by MX-tester
Here it is running on an old HP motherboard.

System: Host: advent Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Hewlett-Packard product: HP d530 SFF(DC578AV)
Mobo: Hewlett-Packard mmodel: 085Ch
Bios: Hewlett-Packard v: 786B2 v1.11 date: 07/10/2003
CPU: Single core Intel Pentium 4 CPU (-UP-) cache: 512 KB clocked at 2793 MHz
Graphics: Card: Intel 82865G Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
GLX Renderer: Mesa DRI Intel 865G x86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.5
Audio: Card: Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card: Broadcom NetXtreme BCM5782 Gigabit Ethernet driver: tg3
IF: eth1 state: down mac: 00:0f:20:76:bf:63
Drives: HDD Total Size: 160.0GB (7.8% used) 1: id: /dev/sda mmodel: Hitachi_HTS54501 size: 160.0GB
Partition:ID: / size: 19G used: 2.8G (16%) fs: ext4 ID: swap-1 size: 2.05GB used: 0.00GB (0%) fs: swap
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 110 Uptime: 5 min Memory: 102.1/1000.2MB
Client: Shell (bash) inxi: 2.1.7

Since running inxi -F on it, it has been refitted with its old IDE 40gb HDD, still using MX-14 no problems.

Re: Post your hardware specs.

Posted: Mon Apr 28, 2014 4:51 pm
by Cyclepiet
One of my systems:


System: Host: mx2 Kernel: 3.12-0.bpo.1-486 i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 27 March 2014
Machine: System: ASUSTEK product: A2H/L v: 1.0
Mobo: ASUSTeK model: A2H/L v: REV 1.xx
Bios: Award v: 0212 date: 04/05/2004
CPU: Single core Intel Celeron CPU (-UP-) cache: 128 KB clocked at 2788 MHz
Graphics: Card: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
Display Server: X.Org 1.12.4 drivers: sis (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
GLX Version: 2.1 Mesa 8.0.5
Audio: Card-1 Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller
driver: snd_intel8x0
Card-2 Logitech QuickCam for Notebooks driver: USB Audio
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-486
Network: Card-1: Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg]
driver: ath5k
IF: wlan0 state: up mac: 00:16:0a:05:ef:68
Card-2: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
driver: sis900
IF: eth0 state: down mac: 00:0e:a6:cb:ac:d9
Drives: HDD Total Size: 40.0GB (-)
ID-1: /dev/sda model: IC25N040ATCS04 size: 40.0GB
Partition: ID-1: / size: 35G used: 7.2G (22%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.02GB (1%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 58.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 127 Uptime: 3:14 Memory: 409.4/469.4MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Tue Apr 29, 2014 6:35 am
by MX-tester
HP-G62 laptop.

$ inxi -F
System: Host: hp-g62 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Hewlett-Packard product: HP G62 Notebook PC v: 049D100000202710000020000
Mobo: Hewlett-Packard model: 1425 v: 54.56 Bios: Hewlett-Packard v: F.32 date: 11/23/2010
CPU: Dual core Intel Core i3 CPU M 330 (-HT-MCP-) cache: 3072 KB
Clock Speeds: 1: 933 MHz 2: 933 MHz 3: 933 MHz 4: 2133 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@59.6hz
GLX Renderer: Mesa DRI Intel Ironlake Mobile x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
IF: wlan0 state: up mac: c4:17:fe:d2:e8:c7
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
IF: eth0 state: down mac: c8:0a:a9:13:7c:10
Drives: HDD Total Size: 128.0GB (26.0% used) ID-1: /dev/sda model: OCZ size: 128.0GB
Partition: ID-1: / size: 6.3G used: 2.9G (49%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 111G used: 31G (30%) fs: ext4 dev: /dev/sda2
Sensors: System Temperatures: cpu: 49.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 145 Uptime: 38 min Memory: 243.0/1887.2MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Wed Apr 30, 2014 10:50 am
by MX-tester
Just got & fitted a (TP Link) PCIe wifi card for this desktop machine. (19" WTFT)
(Novatech mini ITX box.)
Absolutely no problems with the wifi card, brilliant.

$ inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: Foxconn model: H61S
Bios: American Megatrends v: B31F1P02 date: 09/06/2011
CPU: Dual core Intel Core i3-2120 CPU (-HT-MCP-) cache: 3072 KB
Clock Speeds: 1: 2805 MHz 2: 1626 MHz 3: 2758 MHz 4: 1599 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1440x900@59.9hz
GLX Renderer: Mesa DRI Intel Sandybridge Desktop x86/MMX/SSE2 GLX Version: 3.0 Mesa 8.0.5
Audio: Card: Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
driver: r8169
IF: eth0 state: down mac: d0:27:88:9a:75:67
Card-2: Atheros AR9485 Wireless Network Adapter driver: ath9k
IF: wlan2 state: up mac: e8:94:f6:4e:fc:5d
Drives: HDD Total Size: 500.1GB (35.5% used) 1: id: /dev/sda model: SAMSUNG_HM501II size: 500.1GB
Partition: ID: / size: 19G used: 2.4G (14%) fs: ext4 ID: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 30.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 148 Uptime: 1 min Memory: 178.9/3960.1MB
Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Wed Apr 30, 2014 5:38 pm
by Cyclepiet
Another one:


System: Host: mx3 Kernel: 3.12-0.bpo.1-486 i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 27 March 2014
Machine: System: Hewlett-Packard product: HP Compaq dc7100 SFF(DX878AV)
Mobo: Hewlett-Packard model: 097Ch
Bios: Hewlett-Packard v: 786C1 v01.05 date: 06/16/2004
CPU: Single core Intel Pentium 4 CPU (-UP-) cache: 1024 KB clocked at 2992 MHz
Graphics: Card: Intel 82915G/GV/910GL Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1024x768@75.1hz
GLX Renderer: Mesa DRI Intel 915G x86/MMX/SSE2
GLX Version: 1.4 Mesa 8.0.5
Audio: Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-486
Network: Card-1: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express
driver: tg3
IF: eth0 state: down mac: 00:14:c2:0d:6e:21
Card-2: Realtek RTL8192SU 802.11n WLAN Adapter driver: r8712u
IF: wlan0 state: up mac: 00:18:e7:87:63:73
Drives: HDD Total Size: 82.0GB (-)
ID-1: /dev/sda model: Maxtor_6Y080L0 size: 82.0GB
Partition: ID-1: / size: 74G used: 6.7G (10%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 113 Uptime: 4 min Memory: 144.7/1000.7MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Thu May 01, 2014 11:47 am
by MX-tester
Latest conversion.
Novatech dual core Atom bare bones box fitted with 500gb HDD & a PCI TP Link wifi card.

$ inxi -F
System: Host: novaatom Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: Foxconn model: D270S/D250S v: MP
Bios: American Megatrends v: B35F1P06 date: 05/07/2012
CPU: Dual core Intel Atom CPU D2500 (-MCP-) cache: 512 KB
Clock Speeds: 1: 1861 MHz 2: 1861 MHz
Graphics: Card: Intel Atom Processor D2xxx/N2xxx Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: fbdev,vesa (unloaded: intel)
Resolution: 1024x768@0.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: down mac: d0:27:88:ca:1d:11
Card-2: Atheros AR9227 Wireless Network Adapter driver: ath9k
IF: wlan0 state: up mac: c0:4a:00:3d:33:c0
Drives: HDD Total Size: 820.2GB (26.7% used) ID-1: /dev/sda model: ST500DM002 size: 500.1GB
ID-2: /dev/sdb model: HTS543232A7A384 size: 320.1GB
Partition: ID-1: / size: 20G used: 2.8G (15%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 31.0C mobo: 26.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 129 Uptime: 38 min Memory: 249.5/2008.6MB
Client: Shell (bash) inxi: 2.1.18


Not sure why I've got this,
Graphics: Card: Intel Atom Processor D2xxx/N2xxx Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: fbdev,vesa (unloaded: intel)
Resolution: 1024x768@0.0hz

Edit: The HP 19" WTFT is 1440x900

Re: Post your hardware specs.

Posted: Thu May 01, 2014 3:56 pm
by NGIB
My antique:

System: Host: xp Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: LXDE (Openbox 3.5.2) Distro: MX-14 Symbiosis 24 March 2014
Machine: System: TOSHIBA product: SATELLITE PRO 6000 v: VERSION 1.0
Mobo: TOSHIBA model: Portable PC v: Version A0
Bios: TOSHIBA v: Version 1.60 date: 08/05/2003
CPU: Single core Intel Pentium III Mobile CPU (-UP-) cache: 512 KB clocked at 733 MHz
Graphics: Card: Trident Microsystems CyberBlade XPAi1
Display Server: X.Org 1.12.4 drivers: trident (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on softpipe GLX Version: 2.1 Mesa 8.0.5
Audio: Card ULi M5451 PCI AC-Link Controller Audio Device
driver: snd_ali5451
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Intel 82557/8/9/0/1 Ethernet Pro 100 driver: e100
IF: eth0 state: down mac: 00:00:39:66:78:aa
Card-2: Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg]
driver: ath5k
IF: wlan0 state: up mac: 00:11:50:da:13:7e
Drives: HDD Total Size: 80.0GB (-)
ID-1: /dev/sda model: TOSHIBA_MK8032GA size: 80.0GB
Partition: ID-1: / size: 20G used: 2.5G (14%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 2.15GB used: 0.01GB (0%) fs: swap dev: /dev/sda3
Sensors: System Temperatures: cpu: 68.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 110 Uptime: 28 min Memory: 170.3/484.2MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Sat May 03, 2014 11:05 am
by NGIB
Grumpy Lenovo (WiFi is cranky with most distros)

$ inxi -F
System: Host: lvo Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: LXDE (Openbox 3.5.2) Distro: MX-14 Symbiosis 24 March 2014
Machine: System: LENOVO product: 444623U v: Lenovo 3000 G530
Mobo: LENOVO model: KIWDX v: REFERENCE
Bios: LENOVO v: 6GET15WW(V1.06) date: 03/13/2009
CPU: Dual core Intel Pentium Dual CPU T3400 (-MCP-) cache: 1024 KB
Clock Speeds: 1: 1666 MHz 2: 1000 MHz
Graphics: Card: Intel Mobile 4 Series Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1280x800@58.1hz
GLX Renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2
GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 82801I (ICH9 Family) HD Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
IF: wlan1 state: up mac: 00:21:00:c5:f3:cc
Card-2: Broadcom NetLink BCM5906M Fast Ethernet PCI Express
driver: tg3
IF: eth1 state: down mac: 00:23:5a:18:52:d6
Drives: HDD Total Size: 176.1GB (2.3% used)
ID-1: /dev/sda model: ST9160827AS size: 160.0GB
USB ID-2: /dev/sdb model: Cruzer_Glide size: 16.0GB
Partition: ID-1: / size: 145G used: 3.6G (3%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 43.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 130 Uptime: 1:48 Memory: 392.3/4009.1MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Sat May 03, 2014 10:52 pm
by tascoast
M11/MX-14 dual boot desktop....

System: Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: Gigabyte model: 945P-S3 v: x.x
Bios: Award v: F7c date: 06/05/2008
CPU: Dual core Intel Core2 CPU 6300 (-MCP-) cache: 2048 KB
Clock Speeds: 1: 1600 MHz 2: 1600 MHz
Graphics: Card: NVIDIA G71 [GeForce 7300 GS]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1280x1024@60.0hz
GLX Renderer: GeForce 7300 GS/PCIe/SSE2
GLX Version: 2.1.2 NVIDIA 304.117
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full
mac: 00:16:e6:66:07:93
Drives: HDD Total Size: 336.1GB (2.1% used)
ID-1: /dev/sda model: ST3320620AS size: 320.1GB
USB ID-2: /dev/sdb model: Cruzer_Switch size: 16.0GB
Partition: ID-1: / size: 15G used: 2.7G (20%) fs: ext3 dev: /dev/sda6
ID-2: /home size: 35G used: 6.6G (20%) fs: ext3 dev: /dev/sda7
ID-3: swap-1 size: 1.11GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 68.0C mobo: N/A gpu: 53C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 128 Uptime: 3 min Memory: 237.4/3040.1MB
Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Sun May 11, 2014 10:13 am
by Gaer Boy
Newly-built mITX system. The temperatures are way out - the BIOS gives the CPU at 45-50C.

$ inxi -F
System: Host: annesroom Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 22 March 2014
Machine: Mobo: ASRock model: FM2A88X-ITX+ Bios: American Megatrends v: P2.10 date: 01/17/2014
CPU: Quad core AMD A8-6500 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1700 MHz 2: 1700 MHz 3: 1700 MHz 4: 1700 MHz
Graphics: Card: Advanced Micro Devices [AMD] ATI Device 990e
Display Server: X.Org 1.12.4 drivers: fbdev,ati,vesa (unloaded: radeon) Resolution: 1280x1024@0.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] ATI Trinity HDMI Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros Device 10a1 driver: alx
IF: eth1 state: up speed: 100 Mbps duplex: full mac: d0:50:99:0e:a6:61
Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
IF: wlan0 state: down mac: 54:27:1e:1a:5f:dc
Drives: HDD Total Size: 750.2GB (10.5% used) 1: id: /dev/sdb model: SAMSUNG_HD502HJ size: 500.1GB
2: id: /dev/sda model: SAMSUNG_SP2504C size: 250.1GB
Partition: ID: / size: 20G used: 2.6G (15%) fs: ext4 ID: swap-1 size: 2.99GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 6.2C mobo: N/A gpu: 5.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 158 Uptime: 3 min Memory: 232.2/7012.6MB Client: Shell (bash) inxi: 2.1.7

Re: Post your hardware specs.

Posted: Sun May 11, 2014 10:54 am
by Jerry3904
Looks great. How did you deal with the dual sound cards?

Re: Post your hardware specs.

Posted: Sun May 11, 2014 11:21 am
by DBeckett
Gaer Boy wrote:Newly-built mITX system. The temperatures are way out - the BIOS gives the CPU at 45-50C.
My APU machine does the same thing.

Code: Select all

Sensors:   System Temperatures: cpu: 6.1C mobo: N/A gpu: 8.0
           Fan Speeds (in rpm): cpu: N/A

Re: Post your hardware specs.

Posted: Sun May 11, 2014 11:28 am
by Gaer Boy
Give me chance, Jerry - I only finished building it an hour ago, and I haven't connected any speakers yet. There's a few other things to sort out - I'm using the 2 HDDs from an older machine. MX booted fine, but WinXP didn't want to know. Even in safe mode it goes back to the grub screen after 2 secs. I don't need it, so I will get rid of it. First impressions are good, so I will probably add an SDD. Pic attached.
Corsair.JPG

Re: Post your hardware specs.

Posted: Sun May 11, 2014 11:39 am
by Jerry3904
Give me chance, Jerry
Take your time, just wondered...

Re: Post your hardware specs.

Posted: Sun May 11, 2014 12:18 pm
by uncle mark
Gaer Boy wrote:I'm using the 2 HDDs from an older machine. MX booted fine, but WinXP didn't want to know. Even in safe mode it goes back to the grub screen after 2 secs.
Do you mean it spontaneously reboots? Is that Windows Safe Mode, or the safe boot in grub?

Re: Post your hardware specs.

Posted: Sun May 11, 2014 12:55 pm
by timkb4cq
The problem is that it87 module that lm-sensors gets the temps from doesn't correctly identify the thermal sensors in the AMD APUs (A8 & A10 series). You can remedy this by forcing the selection when the module is loaded. Try:

Code: Select all

rmmod it87
modprobe it87 force_id=0x8728
That should provide more correct temps.

The sensors that the k10temp module reads for A8 & A10 APUs are internal readings used to balance use of the cores and they do not correspond to real temperatures. I would blacklist that module so those don't show up.

Re: Post your hardware specs.

Posted: Mon May 12, 2014 9:14 am
by dolphin_oracle
running liveUSB /w persist all weekend.

Code: Select all

demo@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: OptiPlex 780
           Mobo: Dell model: 0C27VV v: A01 Bios: Dell v: A04 date: 04/30/2010
CPU:       Dual core Intel Core2 Duo CPU E7500 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1600 MHz 2: 1600 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI Intel Q45/Q43 x86/MMX/SSE2
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel 82801JD/DO (ICH10 Family) HD Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Broadcom BCM4321 802.11a/b/g/n driver: wl
           IF: wlan1 state: up mac: 5c:ac:4c:87:a2:7f
           Card-2: Intel 82567LM-3 Gigabit Network Connection driver: e1000e
           IF: eth1 state: down mac: b8:ac:6f:4c:a5:66
Drives:    HDD Total Size: 258.0GB (1.0% used)
           ID-1: /dev/sda model: WDC_WD2500AAJS size: 250.0GB
           USB ID-2: /dev/sdb model: Cruzer_Glide size: 8.0GB
Partition: ID-1: / size: 976M used: 858M (93%) fs: rootfs dev: N/A 
           ID-2: /home size: 976M used: 497M (51%) fs: ext4 dev: /dev/loop2 
Sensors:   System Temperatures: cpu: 33.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 137 Uptime: 3 days Memory: 208.8/3004.1MB 
           Client: Shell (bash) inxi: 2.1.18 
demo@mx1:~

Re: Post your hardware specs.

Posted: Mon May 12, 2014 9:20 am
by Gaer Boy
Jerry3904 wrote:Looks great. How did you deal with the dual sound cards?
The only option in the BIOS is to disable Onboard HD Audio. Whichever way this is set - no sound. Also, I have no volume control in the panel.

After looking at everything else, I installed pulseaudio. The Configuration tab gave me 2 x Built-in Audio Profile drop-downs. The first had Digital Stereo (HDMI) Output only, and the second had a dozen options. I turned off the first and set the second to Analog Stereo Output. Sound fine and setting it to Analog Stereo Duplex gave a slightly increased volume. The key to sound was turning off HDMI - with that on, no setting worked.

Phil

Re: Post your hardware specs.

Posted: Mon May 12, 2014 4:31 pm
by Gaer Boy
timkb4cq wrote:The problem is that it87 module that lm-sensors gets the temps from doesn't correctly identify the thermal sensors in the AMD APUs (A8 & A10 series). You can remedy this by forcing the selection when the module is loaded. Try:

Code: Select all

rmmod it87
modprobe it87 force_id=0x8728
That should provide more correct temps.
No luck with that, Tim - rmmod it87 gives "Module it87 is not currently loaded" and it doesn't appear to be present on the system.

Re: Post your hardware specs.

Posted: Mon May 12, 2014 10:18 pm
by bmike1
ancient desktop:

$ inxi -f
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1594 MHz
CPU Flags: acpi apic bts clflush cmov cx8 de dts fpu fxsr ht mca
mce mmx msr mtrr pae pat pebs pge pse pse36 sep ss sse sse2 tm tsc
vme
xbmc@xbmc:~
$ inxi -F
System: Host: xbmc Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: IBM product: 679011U
Mobo: IBM model: IBM Bios: IBM v: 20KT34AUS date: 04/24/2002
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1594 MHz
Graphics: Card: NVIDIA NV34 [GeForce FX 5200]
Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on NV34 GLX Version: 1.5 Mesa 8.0.5
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100
IF: eth0 state: up speed: 100 Mbps duplex: full
mac: 00:09:6b:78:ab:f0
Drives: HDD Total Size: 48.0GB (30.4% used)
ID-1: /dev/sda model: ST340014A size: 40.0GB
ID-2: USB /dev/sdb model: USB_2.0_FD size: 8.0GB
Partition: ID-1: / size: 35G used: 4.3G (13%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 41.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 115 Uptime: 2 days Memory: 281.1/1134.5MB
Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Mon May 12, 2014 10:54 pm
by bmike1
sony vaio tower
when I was shorting the networking capabilities
$ inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Sony product: PCV-RX650(UC) v: 28403730
Mobo: ASUSTeK model: P4B266LM v: REV 1.xx
Bios: Award v: 1004 date: 04/24/2002
CPU: Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB clocked at 1614 MHz
Graphics: Card: NVIDIA NV43 [GeForce 6600 GT]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1024x768@85.0hz
GLX Renderer: GeForce 6600 GT/AGP/SSE2
GLX Version: 2.1.2 NVIDIA 304.117
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Device 50ec:8139
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 80.1GB (0.0% used)
ID-1: /dev/sda model: ST380020A size: 80.0GB
USB ID-2: /dev/sdb model: Flash_Disk size: 0.1GB
Partition: ID-1: / size: 72G used: 3.1G (5%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 128 Uptime: 24 min Memory: 173.6/500.7MB
Client: Shell (bash) inxi: 2.1.18

after I took the screw I lost out of the case:

cat inxi
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Sony product: PCV-RX650(UC) v: 28403730
Mobo: ASUSTeK model: P4B266LM v: REV 1.xx
Bios: Award v: 1004 date: 04/24/2002
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1614 MHz
Graphics: Card: NVIDIA NV43 [GeForce 6600 GT]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1024x768@85.0hz
GLX Renderer: GeForce 6600 GT/AGP/SSE2
GLX Version: 2.1.2 NVIDIA 304.117
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Realtek RTL-8139/8139C/8139C+ driver: 8139too
IF: eth0 state: unknown speed: 100 Mbps duplex: full
mac: 00:e0:18:66:71:14
Drives: HDD Total Size: 80.0GB (6.7% used)
ID-1: /dev/sda model: ST380020A size: 80.0GB
Partition: ID-1: / size: 72G used: 3.1G (5%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 110 Uptime: 3 min Memory: 145.6/500.7MB
Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Mon May 12, 2014 11:10 pm
by BitJam
Gaer Boy wrote:No luck with that, Tim - rmmod it87 gives "Module it87 is not currently loaded" and it doesn't appear to be present on the system.
That's strange. Maybe the module wasn't loaded but it should be on the system. Is this MX-14? The it87 module is here on my MX-14 system:

Code: Select all

/lib/modules/3.12-0.bpo.1-686-pae/kernel/drivers/hwmon/it87.ko

Re: Post your hardware specs.

Posted: Tue May 13, 2014 2:44 am
by Gaer Boy
BitJam wrote:
Gaer Boy wrote:No luck with that, Tim - rmmod it87 gives "Module it87 is not currently loaded" and it doesn't appear to be present on the system.
That's strange. Maybe the module wasn't loaded but it should be on the system. Is this MX-14? The it87 module is here on my MX-14 system:

Code: Select all

/lib/modules/3.12-0.bpo.1-686-pae/kernel/drivers/hwmon/it87.ko
Sorry - my mistake. I don't know how I missed it. I'll try again later - I'm tied up with an insurance claim.

Re: Post your hardware specs.

Posted: Wed May 14, 2014 12:01 am
by Richard
From the desktop:

Code: Select all

richard@mx14:~
$ inxi -Fz
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ECS model: H61H2-CM v: 1.0
           Bios: American Megatrends v: 4.6.4 date: 10/21/2011
CPU:       Dual core Intel Pentium G620 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 2502 MHz 2: 2582 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1440x900@59.9hz
           GLX Renderer: Mesa DRI Intel Sandybridge Desktop x86/MMX/SSE2
           GLX Version: 3.0 Mesa 8.0.5
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
           IF: wlan0 state: down mac: <filter>
Drives:    HDD Total Size: 820.2GB (26.9% used)
           ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
           ID-2: USB /dev/sdb model: Mobile_Drive_XXS size: 320.1GB
Partition: ID-1: / size: 24G used: 6.2G (28%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 2.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 49.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 151 Uptime: 2:40 Memory: 492.4/1952.6MB 
           Client: Shell (bash) inxi: 2.1.28 
richard@mx14:~
$

Re: Post your hardware specs.

Posted: Thu May 15, 2014 6:44 pm
by m_pav
My Production Laptop with the 2GB ATI Graphics disabled.

Code: Select all

$ inxi -F
System:    Host: mikepav Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: LENOVO product: 1143AB2 v: ThinkPad E520
           Mobo: LENOVO model: 1143AB2 Bios: LENOVO v: 8HET44WW(1.26) date: 08/07/2013
CPU:       Dual core Intel Core i7-2640M CPU (-HT-MCP-) cache: 4096 KB 
           Clock Speeds: 1: 1266 MHz 2: 799 MHz 3: 2337 MHz 4: 2070 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile x86/MMX/SSE2 GLX Version: 3.0 Mesa 8.0.5
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth1 state: up speed: 1000 Mbps duplex: full mac: f0:de:f1:d4:19:23
           Card-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce
           IF: wlan1 state: down mac: 9c:b7:0d:51:db:80
Drives:    HDD Total Size: 750.2GB (54.1% used) ID-1: /dev/sda model: ST750LX003 size: 750.2GB
Partition: ID-1: / size: 20G used: 4.6G (25%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 493G used: 264G (57%) fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 51.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: 0 
Info:      Processes: 198 Uptime: 3 days Memory: 1205.9/8022.9MB Client: Shell (bash) inxi: 2.1.18

Re: Post your hardware specs.

Posted: Fri May 16, 2014 9:56 pm
by entropyfoe
Just for fun, I added some benchmarks from the MX-14 bechmarking applications under System -> System profiler and Benchmark.

http://forum.mepiscommunity.org/viewtop ... 42#p337142

Added the benchmarks next to the hardware specs - a nice resource for system builders or buyers.
Not sure if ther is any data on these benchmarks in different hardwares?

Re: Post your hardware specs.

Posted: Fri May 16, 2014 11:28 pm
by sps7
For favored desktop tower (of 2):

Code: Select all

$ inxi -F

System:    Host: mx1-daktech Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: DakTech product: Discovery8 v: 2009
           Mobo: Intel model: DG41RQ v: AAE54511-202
           Bios: Intel v: RQG4110H.86A.0010.2009.0408.1515 date: 04/08/2009
CPU:       Dual core Intel Core2 Duo E8500 (-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 3163 MHz 2: 3163 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI Intel G41 x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:1c:c0:ca:00:e1
Drives:    HDD Total Size: 400.1GB (34.8% used) ID-1: /dev/sda model: ST3400832AS size: 400.1GB
Partition: ID-1: / size: 15G used: 5.4G (39%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 349G used: 121G (37%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 4.06GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 150 Uptime: 10:57 Memory: 1369.3/4010.2MB Client: Shell (bash) inxi: 2.1.28

For desktop tower #2:

Code: Select all

$ inxi -F
System:    Host: mx1-sps Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: IBM product: 8415KUT
           Mobo: IBM model: IBM Bios: IBM v: 2AKT48AUS date: 01/18/2005
CPU:       Single core Intel Pentium 4 (-HT-) cache: 1024 KB 
           Clock Speeds: 1: 2992 MHz 2: 2992 MHz
Graphics:  Card: Intel 82865G Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.0hz
           GLX Renderer: Mesa DRI Intel 865G x86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller 
           driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Intel 82541EI Gigabit Ethernet Controller driver: e1000
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:11:25:27:51:13
Drives:    HDD Total Size: 80.0GB (10.3% used)
           ID-1: /dev/sda model: WDC_WD800BB size: 80.0GB
Partition: ID-1: / size: 9.2G used: 4.5G (52%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 62G used: 652M (2%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 2.92GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 67.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 157 Uptime: 10:55 Memory: 856.2/3515.9MB 
           Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Sun May 18, 2014 5:55 am
by Gaer Boy
Gaer Boy wrote:Newly-built mITX system.

$ inxi -F
System: Host: annesroom Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 22 March 2014
Machine: Mobo: ASRock model: FM2A88X-ITX+ Bios: American Megatrends v: P2.10 date: 01/17/2014
CPU: Quad core AMD A8-6500 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1700 MHz 2: 1700 MHz 3: 1700 MHz 4: 1700 MHz
Graphics: Card: Advanced Micro Devices [AMD] ATI Device 990e
Display Server: X.Org 1.12.4 drivers: fbdev,ati,vesa (unloaded: radeon) Resolution: 1280x1024@0.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] ATI Trinity HDMI Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros Device 10a1 driver: alx
IF: eth1 state: up speed: 100 Mbps duplex: full mac: d0:50:99:0e:a6:61
Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
IF: wlan0 state: down mac: 54:27:1e:1a:5f:dc
Drives: HDD Total Size: 750.2GB (10.5% used) 1: id: /dev/sdb model: SAMSUNG_HD502HJ size: 500.1GB
2: id: /dev/sda model: SAMSUNG_SP2504C size: 250.1GB
Partition: ID: / size: 20G used: 2.6G (15%) fs: ext4 ID: swap-1 size: 2.99GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 6.2C mobo: N/A gpu: 5.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 158 Uptime: 3 min Memory: 232.2/7012.6MB Client: Shell (bash) inxi: 2.1.7
I've now completed the update of this machine, adding an SSD and switching HDDs with the old machine. Here's the new spec.

Code: Select all

$ inxi -F
System:    Host: officeitx Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASRock model: FM2A88X-ITX+
           Bios: American Megatrends v: P2.10 date: 01/17/2014
CPU:       Quad core AMD A8-6500 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 1700 MHz 2: 2700 MHz 3: 1700 MHz 4: 1700 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Device 990e
           Display Server: X.Org 1.12.4 drivers: fbdev,ati,vesa (unloaded: radeon)
           Resolution: 1920x1080@0.0hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Advanced Micro Devices [AMD] FCH Azalia Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros Device 10a1 driver: alx
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: d0:50:99:0e:a6:61
           Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
           IF: wlan0 state: down mac: 54:27:1e:1a:5f:dc
Drives:    HDD Total Size: 1120.2GB (11.8% used)
           ID-1: /dev/sdb model: ST1000DM005_HD10 size: 1000.2GB
           ID-2: /dev/sda model: Samsung_SSD_840 size: 120.0GB
Partition: ID-1: / size: 12G used: 4.3G (40%) fs: ext4 dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 14.0C mobo: N/A gpu: 12.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 168 Uptime: 18:18 Memory: 529.9/7012.6MB 
           Client: Shell (bash) inxi: 2.1.28
I will report further on the machine in separate topics.

Re: Post your hardware specs.

Posted: Sun Jun 01, 2014 2:49 am
by asqwerth

Code: Select all

$ inxi -F
System:    Host: mx1-tuaz Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: Dell DM051
           Mobo: Dell model: 0RD203 Bios: Dell v: A00 date: 08/15/2005
CPU:       Single core Intel Pentium 4 (-HT-) cache: 2048 KB 
           Clock Speeds: 1: 3192 MHz 2: 3192 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV370 5B60 [Radeon X300 (PCIE)]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.0hz
           GLX Renderer: Gallium 0.4 on ATI RV370 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Creative Labs [SB Live! Value] EMU10k1X driver: snd_emu10k1x 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Intel NM10/ICH7 Family LAN Controller driver: e100
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:12:3f:b1:5f:89
Drives:    HDD Total Size: 240.0GB (21.4% used)
           ID-1: /dev/sdb model: Maxtor_6L080M0 size: 80.0GB
           ID-2: /dev/sda model: SAMSUNG_HD160JJ size: 160.0GB
Partition: ID-1: / size: 21G used: 3.7G (20%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 2.05GB used: 0.03GB (1%) fs: swap dev: /dev/sda7 
           ID-3: swap-2 size: 2.81GB used: 0.00GB (0%) fs: swap dev: /dev/sdb10 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 153 Uptime: 2 days Memory: 500.7/1006.6MB 
           Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Tue Sep 23, 2014 8:00 pm
by namida12
MX-14.2 boot easily in ASUSTeK model: M3A

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:   Mobo: ASUSTeK model: M3A v: Rev 1.xx
           Bios: American Megatrends v: 0805 date: 04/18/2008
CPU:       Dual core AMD Athlon 64 X2 5200+ (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 2700 MHz 2: 2700 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV670PRO [Radeon HD 3850]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.0hz
           GLX Renderer: Gallium 0.4 on AMD RV670 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA) 
           driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI RV670/680 HDMI Audio [Radeon HD 3690/3800 Series] 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Atheros Attansic L1 Gigabit Ethernet driver: atl1
           IF: eth0 state: up speed: 1000 Mbps duplex: full 
           mac: 00:1f:c6:be:f0:6e
Partition: ID-1: / size: 1.6G used: 3.3M (1%) fs: rootfs dev: N/A 
Sensors:   System Temperatures: cpu: 35.0C mobo: 34.0C gpu: 77.0 
           Fan Speeds (in rpm): cpu: 2509 psu: 0 sys-1: 0 
Info:      Processes: 113 Uptime: 4 min Memory: 114.0/2023.8MB 
           Client: Shell (bash) inxi: 2.1.28

Code: Select all

$ grep flags /proc/cpuinfo
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch lbrv
Sound works out of the box, I have not installed Pulseaudo nor the Pavcontrol.

I have no hard drive installed but that should be next. A SSD would certainly improve boot speed, and a USB 3.0 for use on this motherboard would have make this a much more useful Motherboard, but have a few more slots.

Mobo: ASUSTeK model: M3A v: Rev 1.xx
http://www.asus.com/Motherboards/M3A/overview/


JR

Re: Post your hardware specs.

Posted: Wed Sep 24, 2014 5:12 am
by eselma
OOOPS! Forgot that one. The specs of my Desktop system:

Code: Select all

System:    Host: orion Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4 
           Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:   Mobo: MSI model: A55-G41 PC Mate (MS-7793) v: 3.0 Bios: American Megatrends v: V17.0 date: 11/14/2013
CPU:       Quad core AMD A10-6800K APU with Radeon HD Graphics (-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 2000 MHz 2: 2000 MHz 3: 2000 MHz 4: 2000 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Device 990c
           Display Server: X.Org 1.12.4 driver: fglrx Resolution: 1920x1080@60.0hz
           GLX Renderer: AMD Radeon HD 8670D GLX Version: 4.4.12874 - CPC 14.10.1006.1001
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel 
           Card-2 Advanced Micro Devices [AMD] ATI Trinity HDMI Audio Controller driver: snd_hda_intel 
           Card-3 Logitech Webcam C270 driver: USB Audio 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Ralink RT2561/RT61 rev B 802.11g driver: rt61pci
           IF: wlan0 state: up 
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full 
Drives:    HDD Total Size: 2000.4GB (31.8% used) ID-1: /dev/sda model: WDC_WD10EZRX size: 1000.2GB
           ID-2: /dev/sdb model: WDC_WD10EZRX size: 1000.2GB
Partition: ID-1: / size: 32G used: 13G (44%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Info:      Processes: 181 Uptime: 38 min Memory: 1593.5/7304.6MB Client: Shell (bash) inxi: 2.1.28
Hope this is enough.

Re: Post your hardware specs.

Posted: Wed Sep 24, 2014 9:13 am
by james c
Latest Desktop install.

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:   Mobo: ASUSTeK model: M2N68-AM Plus v: Rev X.0x
           Bios: American Megatrends v: 1003 date: 12/07/2009
CPU:       Quad core AMD Athlon II X4 620 (-MCP-) cache: 2048 KB 
           Clock Speeds: 1: 2611 MHz 2: 2611 MHz 3: 2611 MHz 4: 2611 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210]
           Display Server: X.Org 1.12.4 driver: nvidia
           Resolution: 1440x900@59.9hz
           GLX Renderer: GeForce 210/PCIe/SSE2/3DNOW!
           GLX Version: 3.3.0 NVIDIA 319.82
Audio:     Card-1 NVIDIA MCP61 High Definition Audio driver: snd_hda_intel 
           Card-2 NVIDIA High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: e0:cb:4e:f6:fb:a4
Drives:    HDD Total Size: 1000.2GB (1.0% used)
           ID-1: /dev/sda model: ST1000DL002 size: 1000.2GB
Partition: ID-1: / size: 193G used: 3.6G (2%) fs: ext4 dev: /dev/sda6 
           ID-2: swap-1 size: 6.40GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 30.0C mobo: 28.0C gpu: 40C 
           Fan Speeds (in rpm): cpu: 1721 sys-1: 1366 
Info:      Processes: 149 Uptime: 2 min Memory: 326.6/4047.5MB 
           Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Fri Sep 26, 2014 10:38 pm
by james c
Another desktop.

Code: Select all

james@mx1:~
$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:   Mobo: ASRock model: N68-S UCC
           Bios: American Megatrends v: P1.70 date: 03/03/2011
CPU:       Dual core AMD Athlon 64 X2 5200+ (-MCP-) cache: 1024 KB 
           Clock Speeds: 1: 2712 MHz 2: 2712 MHz
Graphics:  Card: NVIDIA C61 [GeForce 7025 / nForce 630a]
           Display Server: X.Org 1.12.4 driver: nvidia
           Resolution: 1440x900@59.9hz
           GLX Renderer: GeForce 7025 / nForce 630a/integrated/SSE2/3DNOW!
           GLX Version: 2.1.2 NVIDIA 304.121
Audio:     Card NVIDIA MCP61 High Definition Audio driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:25:22:61:55:fc
Drives:    HDD Total Size: 1000.2GB (1.1% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB
Partition: ID-1: / size: 49G used: 3.2G (7%) fs: ext4 dev: /dev/sda8 
           ID-2: swap-1 size: 8.49GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 38.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 124 Uptime: 8 min Memory: 334.4/3795.6MB 
           Client: Shell (bash) inxi: 2.1.28 
james@mx1:~

Re: Post your hardware specs.

Posted: Fri Sep 26, 2014 10:48 pm
by uncle mark
Old Fujitsu notebook:

Code: Select all


nexdoor@fujitsu:~
$ inxi -F
System:    Host: fujitsu Kernel: 3.12-0.bpo.1-486 i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 27 March 2014 
Machine:   System: FUJITSU product: 0000000000
           Mobo: FUJITSU model: FJNB189 Bios: FUJITSU // Phoenix v: Version 1.25 date: 05/09/2005
CPU:       Single core Intel Pentium M (-UP-) cache: 1024 KB clocked at 1100 MHz
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x768@59.8hz
           GLX Renderer: Mesa DRI Intel 852GM/855GM x86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-486
Network:   Card: Atheros AR5212/AR5213 Wireless Network Adapter driver: ath5k
           IF: wlan0 state: up mac: 00:90:96:a3:b6:2c
Drives:    HDD Total Size: 60.0GB (12.0% used) ID-1: /dev/sda model: HTS726060M9AT00 size: 60.0GB
Partition: ID-1: / size: 54G used: 5.7G (11%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 1.26GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 121 Uptime: 2:18 Memory: 348.6/999.8MB Client: Shell (bash) inxi: 2.1.28 
nexdoor@fujitsu:~
$

Re: Post your hardware specs.

Posted: Sat Sep 27, 2014 5:17 am
by The Boy Wonder

Code: Select all

 System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:  System: Dell product: Dell DE051
           Mobo: Dell model: 0WF887 Bios: Dell v: A01 date: 01/03/2006
CPU:       Single core Intel Celeron (-UP-) cache: 256 KB clocked at 2526 MHz
Graphics:  Card: Intel 82865G Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI Intel 865G x86/MMX/SSE2
           GLX Version: 1.3 Mesa 8.0.5
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller 
           driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Intel 82562EZ 10/100 Ethernet Controller driver: e100
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:16:76:97:d6:e0
Drives:    HDD Total Size: 80.0GB (5.9% used)
           ID-1: /dev/sda model: HDS728080PLAT20 size: 80.0GB
Partition: ID-1: / size: 20G used: 3.6G (20%) fs: ext4 dev: /dev/sda2 
           ID-2: /home size: 52G used: 845M (2%) fs: ext4 dev: /dev/sda3 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 106 Uptime: 36 min Memory: 237.9/498.9MB 
           Client: Shell (bash) inxi: 2.1.28
Do I need "lm-sensors?" What's that?

Re: Post your hardware specs.

Posted: Sat Sep 27, 2014 6:24 am
by Jerry3904
Wikipedia:
lm_sensors (Linux-monitoring sensors), is a free open source software-tool for Linux that provides tools and drivers for monitoring temperatures, voltage, humidity and fans. It can also detect chassis intrusions.

Re: Post your hardware specs.

Posted: Sat Sep 27, 2014 7:46 am
by The Boy Wonder
Jerry3904 wrote:Wikipedia:
lm_sensors (Linux-monitoring sensors), is a free open source software-tool for Linux that provides tools and drivers for monitoring temperatures, voltage, humidity and fans. It can also detect chassis intrusions.
Eh, doesn't sound like anything I need for this old desktop. Just another daemon to eat up a little bit more of an already minimal RAM (512MB, at least until I add some in a few days).

Re: Post your hardware specs.

Posted: Sat Sep 27, 2014 8:14 am
by mmikeinsantarosa
HP nc8430 Latop

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Hewlett-Packard product: HP Compaq nc8430 (RF591UC#ABA) v: F.10
           Mobo: Hewlett-Packard model: 30A3 v: KBC Version 40.17
           Bios: Hewlett-Packard v: 68YVD Ver. F.10 date: 04/17/2007
CPU:       Dual core Intel T2500 (-MCP-) cache: 2048 KB 
           Clock Speeds: 1: 1333 MHz 2: 1667 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI M56P [Radeon Mobility X1600]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1152x768@59.8hz
           GLX Renderer: Gallium 0.4 on ATI RV530 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Broadcom NetXtreme BCM5753M Gigabit Ethernet PCI Express
           driver: tg3
           IF: eth0 state: down mac: 00:17:08:42:0a:a7
           Card-2: Intel PRO/Wireless 3945ABG [Golan] Network Connection
           driver: iwl3945
           IF: wlan0 state: up mac: 00:18:de:bc:f1:20
Drives:    HDD Total Size: 320.1GB (17.7% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID-1: / size: 97G used: 53G (58%) fs: ext4 dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 36.0C mobo: 17.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 158 Uptime: 4 min Memory: 263.4/2024.0MB 
           Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Tue Nov 04, 2014 2:09 am
by Marinos
Geriatric PC (2002!), being amazingly "snappy" with MX-14.2
(used to run consecutive versions of *ubuntu for 7 years before
that.) Everything worked OOTB, only Skype required the additional
installation of Pulse Audio and pavucontrol (plus the well-known
little hack for video.)

Code: Select all

$ inxi -F
System:    Host: toonzdesk Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14.2 Symbiosis 30 June 2014 
Machine:   System: infoquest product: P4X266-PE11/T
           Mobo: N/A model: P4X266-PE11/T Bios: Phoenix v: 6.00 PG date: 12/16/2002
CPU:       Single core Intel Pentium 4 (-UP-) cache: 512 KB clocked at 2394 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV280 [Radeon 9200 SE]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.0hz
           GLX Renderer: Mesa DRI R200 (RV280 5964) x86/MMX/SSE2 TCL DRI2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller driver: snd_via82xx 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] driver: ath5k
           IF: wlan0 state: up mac: 00:27:19:e2:ba:c4
           Card-2: Realtek RTL-8139/8139C/8139C+ driver: 8139too
           IF: eth0 state: down mac: 00:11:6b:97:ec:a6
Drives:    HDD Total Size: 960.2GB (35.9% used) ID-1: /dev/sda model: WDC_WD1600JB size: 160.0GB
           ID-2: /dev/sdb model: WDC_WD3000JB size: 300.1GB
           ID-3: /dev/sdc model: WDC_WD5000AAVS size: 500.1GB
Partition: ID-1: / size: 46G used: 7.0G (17%) fs: ext4 dev: /dev/sdc1 
           ID-2: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sdc3 
Sensors:   System Temperatures: cpu: 21.8C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 143 Uptime: 2:31 Memory: 572.2/1516.2MB Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Tue Nov 04, 2014 5:15 am
by Jerry3904
Welcome to MX! That combination of the antiX base and the Xfce DE is a real winner.

Re: Post your hardware specs.

Posted: Fri Nov 07, 2014 12:16 am
by KernSpy
Desktop PC ..

System: Host: Kernspy Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14.2 Symbiosis 30 June 2014

Machine: Mobo: Gigabyte model: GA-MA785GT-UD3H v: x.x
Bios: Award v: F3 date: 09/16/2009

CPU: Quad core AMD Athlon II X4 635 (-MCP-) cache: 2048 KB
Clock Speeds: 1: 800 MHz 2: 1700 MHz 3: 800 MHz 4: 800 MHz

Graphics: Card: Advanced Micro Devices [AMD] ATI RS880 [Radeon HD 4200]
Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1280x1024@60.0hz
GLX Renderer: Gallium 0.4 on AMD RS880 GLX Version: 2.1 Mesa 8.0.5

Audio: Card-1 Advanced Micro Devices [AMD] ATI RS880 HDMI Audio [Radeon HD 4200 Series]
driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA)
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae

Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
driver: r8169
IF: eth0 state: down mac: 6c:f0:49:04:5c:c6
Card-2: Ralink
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A

Drives: HDD Total Size: 2176.0GB (1.0% used)
ID-1: /dev/sda model: ST31000528AS size: 1000.2GB
ID-2: /dev/sdb model: WDC_WD1600AAJS size: 160.0GB
ID-3: USB /dev/sdc model: Desktop size: 500.1GB
ID-4: USB /dev/sdd model: STORE_N_GO size: 15.5GB
ID-5: USB /dev/sde model: 5000AAK_External size: 500.1GB

Partition: ID-1: / size: 143G used: 3.5G (3%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 138G used: 8.8G (7%) fs: ext4 dev: /dev/sda3
ID-3: swap-1 size: 9.44GB used: 0.00GB (0%) fs: swap dev: /dev/sda5

Sensors: System Temperatures: cpu: 41.0C mobo: 35.0C
Fan Speeds (in rpm): cpu: 2481 fan-2: 0 fan-3: 1433 fan-5: 0

Info: Processes: 150 Uptime: 15 min Memory: 230.3/3536.9MB
Client: Shell (bash) inxi: 2.1.28

Re: Post your hardware specs.

Posted: Tue Apr 14, 2015 11:05 pm
by obx_ruckle
System: Host: OBX-Ruckle Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.12.1
Distro: MX-14.2 Symbiosis 30 June 2014
Machine: System: Dell product: Inspiron 1420
Mobo: Dell model: 0DT492 Bios: Dell v: A08 date: 04/21/2008
CPU: Dual core Intel Core2 Duo T5750 (-MCP-) cache: 2048 KB
clock speeds: max: 2000 MHz 1: 1000 MHz 2: 1000 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x800@59.9hz
GLX Renderer: Mesa DRI Intel 965GM x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Broadcom NetLink BCM5906M Fast Ethernet PCI Express driver: tg3
IF: eth0 state: down mac: 00:1e:c9:09:26:90
Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
IF: wlan0 state: up mac: 00:16:44:e1:b2:83
Drives: HDD Total Size: 250.1GB (3.4% used) ID-1: /dev/sda model: WDC_WD2500BEVS size: 250.1GB
Partition: ID-1: / size: 228G used: 6.0G (3%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 46.5C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 154 Uptime: 1:01 Memory: 300.7/3030.7MB Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Tue Apr 14, 2015 11:10 pm
by smilliken

Code: Select all

 inxi -F
System:    Host: Programmer1 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14.3 Symbiosis 03 December 2014
Machine:   System: Dell product: Inspiron 1525
           Mobo: Dell model: 0U990C Bios: Dell v: A17 date: 10/27/2009
CPU:       Dual core Intel Core2 Duo T5750 (-MCP-) cache: 2048 KB 
           clock speeds: max: 2000 MHz 1: 1667 MHz 2: 2000 MHz
Graphics:  Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x800@60.0hz
           GLX Renderer: Mesa DRI Intel 965GM x86/MMX/SSE2
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Marvell 88E8040 PCI-E Fast Ethernet Controller driver: sky2
           IF: eth0 state: down mac: 00:1d:09:60:ea:cb
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
           IF: wlan0 state: up mac: 00:1f:e1:89:b0:6d
Drives:    HDD Total Size: 1000.2GB (14.6% used)
           ID-1: /dev/sda model: WDC_WD10JPVX size: 1000.2GB
Partition: ID-1: / size: 111G used: 7.3G (7%) fs: ext4 dev: /dev/sda2
           ID-2: /home size: 337G used: 128G (40%) fs: ext4 dev: /dev/sda6
           ID-3: swap-1 size: 2.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Sensors:   System Temperatures: cpu: 71.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 167 Uptime: 3:34 Memory: 614.6/4042.3MB
           Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Wed Apr 15, 2015 7:29 am
by Leo
amra@LionsPride:~
$ inxi -F
System: Host: LionsPride Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
Desktop: Xfce 4.12.1 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine: System: HP Pavilion 061 product: PJ473AA-ABA M1160N v: 0qq1112RE101SALMO00
Mobo: ASUSTek model: Salmon v: 1.03
Bios: Phoenix v: 3.02 date: 09/02/2004
CPU: Single core AMD Athlon 64 3400+ (-UP-) cache: 1024 KB
speed/max: 1800/2200 MHz
Graphics: Card: NVIDIA NV34 [GeForce FX 5200]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1280x1024@50.0hz
GLX Renderer: GeForce FX 5200/PCI/SSE2/3DNOW!
GLX Version: 2.1.2 NVIDIA 173.14.39
Audio: Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller
driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network: Card: 3Com 3c905B 100BaseTX [Cyclone] driver: 3c59x
IF: eth0 state: unknown speed: 100 Mbps duplex: full
mac: 00:10:4b:cb:16:a1
Drives: HDD Total Size: 730.8GB (0.8% used)
ID-1: /dev/sda model: Maxtor_5T030H3 size: 30.6GB
ID-2: /dev/sdb model: WDC_WD2000BB size: 200.0GB
ID-3: USB /dev/sdc model: Backup+_BK size: 500.1GB
Partition: ID-1: / size: 12G used: 3.6G (33%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 15G used: 310M (3%) fs: ext4 dev: /dev/sda3
ID-3: swap-1 size: 2.12GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 40.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 136 Uptime: 40 min Memory: 383.7/2023.9MB
Client: Shell (bash) inxi: 2.2.19
amra@LionsPride:~
$
My OS hard drive decided to take a dirt nap, so I replaced it with the biggest one I had, and decided to put MX-14 on it...so I'm off on an adventure. I'm getting too old for this...

Re: Post your hardware specs.

Posted: Wed Apr 15, 2015 1:22 pm
by MX-tester
keith@hp-g62:~
$ inxi -F
System: Host: hp-g62 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
Desktop: Xfce 4.12.1 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine: System: Hewlett-Packard product: HP G62 Notebook PC v: 049D100000202710000020000
Mobo: Hewlett-Packard model: 1425 v: 54.56
Bios: Hewlett-Packard v: F.32 date: 11/23/2010
CPU: Dual core Intel Core i3 M 330 (-HT-MCP-) cache: 3072 KB
clock speeds: max: 2133 MHz 1: 933 MHz 2: 1599 MHz 3: 933 MHz
4: 933 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1366x768@59.6hz
GLX Renderer: Mesa DRI Intel Ironlake Mobile x86/MMX/SSE2
GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 5 Series/3400 Series High Definition Audio
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k
IF: wlan0 state: up mac: c4:17:fe:d2:e8:c7
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169
IF: eth0 state: down mac: c8:0a:a9:13:7c:10
Drives: HDD Total Size: 320.1GB (81.2% used)
ID-1: /dev/sda model: Hitachi_HTS72503 size: 320.1GB
Partition: ID-1: / size: 6.7G used: 3.2G (50%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 287G used: 239G (84%) fs: ext4 dev: /dev/sda2
Sensors: System Temperatures: cpu: 44.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 143 Uptime: 6 min Memory: 209.4/1886.8MB
Client: Shell (bash) inxi: 2.2.19

Just running Iceweasel & bash.

Re: Post your hardware specs.

Posted: Wed Apr 15, 2015 4:34 pm
by sps7
For my desktop tower-- I'll post the info for 2 different laptops later:

Code: Select all

inxi -F
System:    Host: mx1-daktech Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit) Desktop: KDE 4.8.4
           Distro: MX-14 Symbiosis 24 March 2014
Machine:   System: DakTech product: Discovery8 v: 2009
           Mobo: Intel model: DG41RQ v: AAE54511-202 serial: AZRQ91600GHK
           Bios: Intel v: RQG4110H.86A.0010.2009.0408.1515 date: 04/08/2009
CPU:       Dual core Intel Core2 Duo E8500 (-MCP-) cache: 6144 KB 
           clock speeds: max: 3163 MHz 1: 1998 MHz 2: 1998 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           tty size: 97x36 Advanced Data: N/A for root
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:1c:c0:ca:00:e1
Drives:    HDD Total Size: 400.1GB (44.6% used) ID-1: /dev/sda model: ST3400832AS size: 400.1GB
Partition: ID-1: / size: 15G used: 7.4G (54%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 349G used: 156G (47%) fs: ext4 dev: /dev/sda3
           ID-3: swap-1 size: 4.06GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 35.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 178 Uptime: 4:15 Memory: 1542.5/4009.9MB
           Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Wed Apr 15, 2015 5:07 pm
by sps7
For my Dell laptop-- there's also an HP laptop the info for which I'll post later:

Code: Select all

inxi -F
System:    Host: Dell-Latitude-E6410 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit) Desktop: KDE 4.8.4
           Distro: MX-14.3 Symbiosis 03 December 2014
Machine:   System: Dell product: Latitude E6410 v: 0001
           Mobo: Dell model: N/A Bios: Dell v: A03 date: 05/28/2010
CPU:       Dual core Intel Core i5 M 540 (-HT-MCP-) cache: 3072 KB 
           clock speeds: max: 2534 MHz 1: 1199 MHz 2: 1199 MHz 3: 1199 MHz 4: 1199 MHz
Graphics:  Card: NVIDIA GT218 [NVS 3100M]
           Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1280x800@60.0hz
           GLX Renderer: Gallium 0.4 on NVA8 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel
           Card-2 NVIDIA High Definition Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Intel 82577LM Gigabit Network Connection driver: e1000e
           IF: eth0 state: down mac: 00:26:b9:c3:63:8c
           Card-2: Broadcom BCM4313 802.11b/g/n Wireless LAN Controller driver: wl
           IF: wlan0 state: up mac: 78:e4:00:29:90:70
Drives:    HDD Total Size: 320.1GB (53.6% used) ID-1: /dev/sda model: HITACHI_HTS72323 size: 320.1GB
Partition: ID-1: / size: 15G used: 5.6G (39%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 274G used: 151G (58%) fs: ext4 dev: /dev/sda5
           ID-3: swap-1 size: 4.74GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 51.0C mobo: N/A gpu: 61.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 181 Uptime: 15 min Memory: 743.9/3976.3MB Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Wed Apr 15, 2015 10:58 pm
by mmikeinsantarosa
My desktop -

Code: Select all

inxi -F
System:    Host: mx14 Kernel: 3.13-5.dmz.2-liquorix-686 i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14 Symbiosis 24 March 2014
Machine:   System: Dell product: Inspiron 660
           Mobo: Dell model: 084J0R v: A00 Bios: Dell v: A10 date: 05/13/2013
CPU:       Quad core Intel Core i5-3340 (-MCP-) cache: 6144 KB 
           clock speeds: max: 3101 MHz 1: 1600 MHz 2: 1600 MHz 3: 1600 MHz
           4: 1600 MHz
Graphics:  Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
           Display Server: X.Org 1.12.4 driver: intel
           Resolution: 1920x1080@60.0hz
           GLX Renderer: Mesa DRI Intel Ivybridge Desktop x86/MMX/SSE2
           GLX Version: 3.0 Mesa 8.0.5
Audio:     Card Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel
           Sound: ALSA v: k3.13-5.dmz.2-liquorix-686
Network:   Card-1: Atheros AR9485 Wireless Network Adapter driver: ath9k
           IF: wlan0 state: up mac: 3c:77:e6:a5:87:11
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: down mac: c8:1f:66:1b:29:05
Drives:    HDD Total Size: 1500.3GB (0.5% used)
           ID-1: /dev/sdb model: WDC_WD5000AZLX size: 500.1GB
           ID-2: /dev/sda model: ST1000DM003 size: 1000.2GB
Partition: ID-1: / size: 11G used: 7.6G (80%) fs: ext4 dev: /dev/sda5
Sensors:   System Temperatures: cpu: 36.0C mobo: 29.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 149 Uptime: 0 min Memory: 152.1/7987.1MB
           Client: Shell (bash) inxi: 2.2.16
laptop #1 -

Code: Select all

inxi -F
System:    Host: mx14-4 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine:   System: Dell product: Latitude E6500
           Mobo: Dell model: 0F327M Bios: Dell v: A19 date: 12/21/2009
CPU:       Dual core Intel Core2 Duo P8700 (-MCP-) cache: 3072 KB 
           clock speeds: max: 2535 MHz 1: 2534 MHz 2: 1600 MHz
Graphics:  Card: NVIDIA G98M [Quadro NVS 160M]
           Display Server: X.Org 1.12.4 drivers: vesa,nouveau (unloaded: fbdev)
           Resolution: 1280x800@0.0hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Intel 82567LM Gigabit Network Connection driver: e1000e
           IF: eth0 state: down mac: 00:26:b9:ca:1c:7a
           Card-2: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
           IF: wlan0 state: up mac: 78:e4:00:07:70:68
Drives:    HDD Total Size: 250.1GB (20.9% used)
           ID-1: /dev/sda model: WDC_WD2500BJKT size: 250.1GB
Partition: ID-1: / size: 228G used: 47G (22%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 29.5C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 156 Uptime: 1 min Memory: 143.1/4040.1MB
           Client: Shell (bash) inxi: 2.2.19

Re: Post your hardware specs.

Posted: Thu Apr 16, 2015 4:21 pm
by sps7
For my HP Pavilion g7-1322nr notebook/laptop:

Code: Select all

inxi -F
System:    Host: mx14-HP-Pavilion Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4
           Distro: MX-14.1.1 Symbiosis 18 June 2014
Machine:   System: Hewlett-Packard product: HP Pavilion g7 Notebook PC v: 068F130000204620000620100
           Mobo: Hewlett-Packard model: 3568 v: 21.39 Bios: Insyde v: F.46 date: 02/22/2012
CPU:       Dual core AMD A4-3305M APU with Radeon HD Graphics (-MCP-) cache: 1024 KB 
           clock speeds: max: 1900 MHz 1: 1000 MHz 2: 1600 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Device 9649
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz
           GLX Renderer: Gallium 0.4 on AMD SUMO GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD] ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]                                                                                                               
           driver: snd_hda_intel                                                                                                                                                                                                 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae                                                                                                                                                     
Network:   Card-1: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce                                                                                                                                                  
           IF: wlan0 state: up mac: 20:10:7a:7a:90:41                                                                                                                                                                            
           Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169                                                                                                                                  
           IF: eth0 state: down mac: 28:92:4a:3f:4d:9e                                                                                                                                                                           
Drives:    HDD Total Size: 500.1GB (5.6% used) ID-1: /dev/sda model: TOSHIBA_MK5076GS size: 500.1GB                                                                                                                              
Partition: ID-1: / size: 16G used: 5.5G (39%) fs: ext4 dev: /dev/sda1                                                                                                                                                            
           ID-2: /home size: 437G used: 15G (4%) fs: ext4 dev: /dev/sda5                                                                                                                                                         
           ID-3: swap-1 size: 6.60GB used: 0.00GB (0%) fs: swap dev: /dev/sda2                                                                                                                                                   
Sensors:   System Temperatures: cpu: 52.1C mobo: N/A gpu: 52.0                                                                                                                                                                   
           Fan Speeds (in rpm): cpu: N/A                                                                                                                                                                                         
Info:      Processes: 155 Uptime: 38 min Memory: 608.8/3518.0MB Client: Shell (bash) inxi: 2.2.16
I'm not crazy about this HP laptop because of weird things that happen, such as the above strange spacing. I suspect the AMD CPU is doing this but I'm not 100% sure about this. I've never had an AMD CPU before-- I've only had (and still have them in my other computers) Intel CPUs before the AMD one in this HP laptop (which I don't use much and did inherit from a family member).

Re: Post your hardware specs.

Posted: Thu Apr 16, 2015 5:55 pm
by namida12
New 14.4 install today

Code: Select all

green612@mx125:~/Desktop
$ inxi -F
System:    Host: mx125 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit) Desktop: Xfce 4.12.1
           Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine:   Mobo: TAR model: G41-M7 v: ' ' Bios: American Megatrends v: 080015 date: 09/23/2009
CPU:       Dual core Intel Celeron E3300 (-MCP-) cache: 1024 KB 
           clock speeds: max: 2500 MHz 1: 1203 MHz 2: 1603 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Cedar PRO [Radeon HD 5450/6350]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz
           GLX Renderer: Gallium 0.4 on AMD CEDAR GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
           driver: snd_hda_intel
           Card-2 Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
           IF: eth0 state: down mac: 00:30:67:60:01:8e
           Card-2: Realtek RTL8169 PCI Gigabit Ethernet Controller driver: r8169
           IF: eth1 state: up speed: 1000 Mbps duplex: full mac: 00:14:d1:1f:fb:e8
Drives:    HDD Total Size: 60.0GB (21.5% used) ID-1: /dev/sda model: Corsair_Force_3 size: 60.0GB
Partition: ID-1: / size: 9.3G used: 3.5G (40%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 42G used: 4.8G (12%) fs: ext4 dev: /dev/sda3
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 38.0C mobo: N/A gpu: 57.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 149 Uptime: 5:07 Memory: 397.2/2023.4MB Client: Shell (bash) inxi: 2.2.19
JR

Re: Post your hardware specs.

Posted: Thu Apr 16, 2015 8:13 pm
by PhilH
Acer Aspire Laptop

System: Host: Acer2010 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.12.1 Distro: MX-14 Symbiosis 24 March 2014
Machine: Mobo: Acer model: Aspire 5517 v: V1.09
Bios: Acer v: V1.09 date: 11/30/2009
CPU: Dual core AMD Athlon 64 X2 TK-42 (-MCP-) cache: 1024 KB
clock speeds: max: 1600 MHz 1: 800 MHz 2: 800 MHz
Graphics: Card: Advanced Micro Devices [AMD] ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics]
Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1366x768@60.0hz
GLX Renderer: Gallium 0.4 on AMD RS780 GLX Version: 2.1 Mesa 8.0.5
Audio: Card Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA)
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: wl
IF: wlan0 state: up mac: 90:4c:e5:a9:a9:ac
Card-2: Atheros AR8132 Fast Ethernet driver: atl1c
IF: eth0 state: down mac: 00:23:5a:76:09:16
Drives: HDD Total Size: 320.1GB (66.9% used)
ID-1: /dev/sda model: Hitachi_HTS54503 size: 320.1GB
Partition: ID-1: / size: 20G used: 7.8G (44%) fs: ext4 dev: /dev/sda5
ID-2: /home size: 73G used: 7.3G (11%) fs: ext4 dev: /dev/sda7
ID-3: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
Sensors: System Temperatures: cpu: 56.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 164 Uptime: 9 min Memory: 616.8/2782.6MB
Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Thu Apr 16, 2015 9:49 pm
by entropyfoe
this is my alternate machine. Aimed for low power, I just replaced the ancient OCZ 30Gig drive with a nice new Sammy 850 Pro. It is cool and quiet, a quad core at 2.5 GHz and 45 Watts, a WD green drive, fanless power supply, one big slow 120mm case fan all crammed into a tiny cube case.
So what better to load than MX-14.4 !

Easy install, very stable, everything works out of the box, wakes from sleep in 20 seconds, wired eth0, sound. All updated, installed a bunch more programs. So far great.

Code: Select all

$ inxi -F
System:    Host: X4 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine:   Mobo: ASUSTeK model: M4A88T-I DELUXE v: Rev X.0x
           Bios: American Megatrends v: 0501 date: 06/30/2010
CPU:       Quad core AMD Athlon II X4 615e (-MCP-) cache: 2048 KB 
           clock speeds: max: 2500 MHz 1: 800 MHz 2: 1800 MHz 3: 800 MHz
           4: 800 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RS880 [Radeon HD 4250]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.0hz
           GLX Renderer: Gallium 0.4 on AMD RS880 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Advanced Micro Devices [AMD] ATI RS880 HDMI Audio [Radeon HD 4200 Series]
           driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD] ATI SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full
           mac: bc:ae:c5:38:8f:49
           Card-2: ASUSTek 802.11n Network Adapter
           IF: null-if-id state: N/A mac: N/A
Drives:    HDD Total Size: 1128.2GB (48.5% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 128.0GB
           ID-2: /dev/sdb model: WDC_WD10EADS size: 1000.2GB
Partition: ID-1: / size: 22G used: 3.6G (18%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 21G used: 122M (1%) fs: ext4 dev: /dev/sda3
           ID-3: swap-1 size: 9.44GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 36.0C mobo: 32.0C
           Fan Speeds (in rpm): cpu: 629 sys-1: 0
Info:      Processes: 173 Uptime: 10 days Memory: 715.3/3795.2MB
           Client: Shell (bash) inxi: 2.2.19

Re: Post your hardware specs.

Posted: Thu Apr 16, 2015 10:21 pm
by mmikeinsantarosa
The laptop that sold me on MX. This one was about to go into the recycle bin. It had XP on it and wouldn't run.

Code: Select all

 $ inxi -F
System:    Host: mx1 Kernel: 3.13-5.dmz.2-liquorix-686 i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14 Symbiosis 24 March 2014
Machine:   System: Hewlett-Packard product: HP Compaq nc8430 (RF591UC#ABA) v: F.10
           Mobo: Hewlett-Packard model: 30A3 v: KBC Version 40.17
           Bios: Hewlett-Packard v: 68YVD Ver. F.10 date: 04/17/2007
CPU:       Dual core Intel T2500 (-MCP-) cache: 2048 KB 
           clock speeds: max: 2000 MHz 1: 1000 MHz 2: 2000 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI M56P [Radeon Mobility X1600]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1152x768@59.8hz
           GLX Renderer: Gallium 0.4 on ATI RV530 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel
           Sound: ALSA v: k3.13-5.dmz.2-liquorix-686
Network:   Card-1: Broadcom NetXtreme BCM5753M Gigabit Ethernet PCI Express
           driver: tg3
           IF: eth0 state: down mac: 00:17:08:42:0a:a7
           Card-2: Intel PRO/Wireless 3945ABG [Golan] Network Connection
           driver: iwl3945
           IF: wlan0 state: up mac: 00:18:de:bc:f1:20
Drives:    HDD Total Size: 320.1GB (20.5% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID-1: / size: 97G used: 62G (67%) fs: ext4 dev: /dev/sda1
Sensors:   System Temperatures: cpu: 65.0C mobo: 56.0C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 160 Uptime: 6 min Memory: 438.6/2022.9MB
           Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Fri Apr 17, 2015 11:20 am
by namida12
mmikeinsantarosa wrote:The laptop that sold me on MX. This one was about to go into the recycle bin. It had XP on it and wouldn't run.

Code: Select all

 Hewlett-Packard product: HP Compaq nc8430
Mike,

I know I am off topic but this needs to be said: take a moment and think how many of these are unused computers forgotten and stored in the bottom of a hallways or upstairs closets, bottom drawers, under a pile of papers on a desk or corner table, or are sitting in garages exposed to the elements, because they have an infected Microsoft Windows o/s and will not boot or take several hours to boot, when they are viable systems running a modern updated MX-14.4 Linux.

JR

Re: Post your hardware specs.

Posted: Tue Apr 21, 2015 2:04 pm
by namida12
Trying to install in this older video hardware with Kmathern's assistance. Currently in Live mode, and have run out of time to install, and reload all the files backed up. Will try to complete this install in several more weeks, when system is returned to Nevada...

JR

Code: Select all

$ inxi -F
System:    Host: mx1 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
           Desktop: Xfce 4.12.1 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine:   Mobo: N/A model: NF-MCP61 Bios: Phoenix v: 6.00 PG date: 10/24/2008
CPU:       Dual core AMD Athlon 4050e (-MCP-) cache: 1024 KB 
           clock speeds: max: 2100 MHz 1: 1000 MHz 2: 1000 MHz
Graphics:  Card: NVIDIA C61 [GeForce 6150SE nForce 430]
           Display Server: X.Org 1.12.4 drivers: vesa,nouveau (unloaded: fbdev)
           Resolution: 1024x768@61.0hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
           GLX Version: 1.4 (2.1 Mesa 8.0.5)
Audio:     Card NVIDIA MCP61 High Definition Audio driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full
           mac: 00:30:18:aa:51:83
Drives:    HDD Total Size: 320.1GB (1.3% used)
           ID-1: /dev/sda model: ST3320620AS size: 320.1GB
Partition: ID-1: / size: 1.4G used: 702M (51%) fs: rootfs dev: N/A
           ID-2: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 35.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 123 Uptime: 22 min Memory: 181.9/1768.6MB
           Client: Shell (bash) inxi: 2.2.19
I have another similar system to update with idential hardware.

JR

Re: Post your hardware specs.

Posted: Wed Apr 22, 2015 6:11 am
by Frost
Here is my laptop spec:

Code: Select all

System:    Host: Frost Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
           Desktop: Xfce 4.12.0 Distro: MX-14.4-pae Symbiosis 22 March 2015
Machine:   System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC v: 059B110000243010010020100
           Mobo: Hewlett-Packard model: 144A v: 65.2E
           Bios: Hewlett-Packard v: F.13 date: 09/14/2010
CPU:       Dual core Intel Core i5 M 460 (-HT-MCP-) cache: 3072 KB 
           clock speeds: max: 2534 MHz 1: 1199 MHz 2: 1199 MHz 3: 1199 MHz
           4: 1199 MHz
Graphics:  Card-1: Intel Core Processor Integrated Graphics Controller
           Card-2: Advanced Micro Devices [AMD] ATI Manhattan [Mobility Radeon HD 5400 Series]
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@59.6hz
           GLX Renderer: Mesa DRI Intel Ironlake Mobile x86/MMX/SSE2
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card-1 Intel 5 Series/3400 Series High Definition Audio
           driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD] ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network:   Card-1: Intel Centrino Wireless-N 1000 [Condor Peak]
           driver: iwlwifi
           IF: wlan0 state: down mac: 00:26:c7:a9:d4:ca
           Card-2: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full
           mac: 64:31:50:5d:fe:18
Drives:    HDD Total Size: 640.1GB (0.9% used)
           ID-1: /dev/sda model: SAMSUNG_HM641JI size: 640.1GB
Partition: ID-1: / size: 13G used: 3.6G (31%) fs: ext4 dev: /dev/sda6
           ID-2: swap-1 size: 2.01GB used: 0.00GB (0%) fs: swap dev: /dev/sda7
Sensors:   System Temperatures: cpu: 55.0C mobo: N/A gpu: 47.5
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 186 Uptime: 5 min Memory: 423.6/3842.7MB
           Client: Shell (bash) inxi: 2.2.19

Re: Post your hardware specs.

Posted: Sat May 13, 2017 4:53 pm
by zvo
Working excellent on my TOSHIBA Satelite Pro 4600 laptop from 2001 (!), with hard disk of 10GB and 512 Mb memory.
I wish to try MX 15 and MX 16 on it, but it have only CD, not DVD.

System: Host: mx14 Kernel: 3.14-0.bpo.2-686-pae i686 (32 bit)
Desktop: Xfce 4.10.3 Distro: MX-14.3 Symbiosis 03 December 2014
Machine: System: TOSHIBA product: Portable PC v: Version 1.0
Mobo: TOSHIBA model: Portable PC v: Version A0
Bios: TOSHIBA v: Version 2.6D date: 05/08/2002
CPU: Single core Pentium III (Coppermine) (-UP-) cache: 256 KB
speed/max: 700/1000 MHz
Graphics: Card: Trident Microsystems CyberBlade/XP
Display Server: X.Org 1.12.4 drivers: trident (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on softpipe GLX Version: 2.1 Mesa 8.0.5
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.14-0.bpo.2-686-pae
Network: Card-1: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100
IF: eth0 state: down mac: 00:00:39:94:1c:93
Card-2: Realtek RTL8187 Wireless Adapter
IF: N/A state: N/A mac: N/A
Drives: HDD Total Size: 10.1GB (54.9% used)
ID-1: /dev/sda model: IBM size: 10.1GB
Partition: ID-1: / size: 8.1G used: 4.2G (55%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 1.10GB used: 0.01GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 61.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 124 Uptime: 10 min Memory: 264.0/499.7MB
Client: Shell (bash) inxi: 2.2.16

Re: Post your hardware specs.

Posted: Sat May 13, 2017 6:04 pm
by whell

Code: Select all

 inxi -f
CPU:       Dual core Pentium T4500 (-MCP-) cache: 1024 KB 
           clock speeds: max: 2300 MHz 1: 1600 MHz 2: 1600 MHz
           CPU Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov
           constant_tsc cx16 cx8 de ds_cpl dtes64 dtherm dts eagerfpu est fpu
           fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe
           pdcm pebs pge pni pse pse36 rep_good sep ss sse sse2 ssse3 syscall
           tm tm2 tsc vme xsave xtpr

Re: Post your hardware specs.

Posted: Sat May 13, 2017 6:10 pm
by Jerry3904
To get the full output, make that a capital letter:

Code: Select all

inxi -F

Re: Post your hardware specs.

Posted: Sat May 13, 2017 6:29 pm
by timkb4cq
zvo wrote:Working excellent on my TOSHIBA Satelite Pro 4600 laptop from 2001 (!), with hard disk of 10GB and 512 Mb memory.
I wish to try MX 15 and MX 16 on it, but it have only CD, not DVD
If you can burn a Plop Linux boot CD, you can use it to boot from a flash drive of MX-16 even with the USB 1.1 ports the 4600 has.
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited