Re: MX-23 beta 2 feedback thread
Posted: Sat Jun 24, 2023 4:44 pm
OK. What about the 'two chromiums', one say it is 'auto mode' and other 'manual mode' ... which one is the real one?
Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/
They are the same thing. "auto" just means that it has been automatically selected as your default browser.keos wrote: Sat Jun 24, 2023 4:44 pm OK. What about the 'two chromiums', one say it is 'auto mode' and other 'manual mode' ... which one is the real one?
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
Desktop: Fluxbox v: 1.3.7 vt: 7 dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15
2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: HP-Pavilion product: AY022AA-ABA p6330f v: N/A serial: <superuser required>
Chassis: Hewlett-Packard type: 3 serial: <superuser required>
Mobo: MSI model: IONA v: 1.0 serial: <superuser required> BIOS: American Megatrends v: 5.15
date: 06/25/2010
CPU:
Info: model: Intel Core i3 530 bits: 64 type: MT MCP arch: Westmere gen: core 1 level: v2
built: 2010-11 process: Intel 32nm family: 6 model-id: 0x25 (37) stepping: 2 microcode: 0x11
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1455 high: 1459 min/max: 1200/2933 scaling: driver: acpi-cpufreq
governor: ondemand cores: 1: 1455 2: 1459 3: 1448 4: 1459 bogomips: 23410
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel
arch: Gen-5.75 process: Intel 45nm built: 2010 ports: active: VGA-1 empty: DP-1,HDMI-A-1
bus-ID: 00:02.0 chip-ID: 8086:0042 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: intel dri: crocus gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: VGA-1 mapped: VGA1 model: AOC 2436 serial: <filter> built: 2010 res: 1920x1080
hz: 60 dpi: 94 gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: Mesa Intel HD Graphics (ILK) direct-render: Yes
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard 5
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d800 bus-ID: 01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
RAID:
Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: c080 bus-ID: 00:1f.2
chip-ID: 8086:2822 rev: N/A class-ID: 0104
Drives:
Local Storage: total: 1.82 TiB used: 15.21 GiB (0.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: DT01ACA200 size: 1.82 TiB block-size:
physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: ABB0
scheme: MBR
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 15.21 GiB (0.8%) fs: ext4 dev: /dev/sda1
maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 30.2 C mobo: 21.6 C
Fan Speeds (RPM): cpu: 821 fan-2: 866 fan-3: 0
Power: 12v: N/A 5v: N/A 3.3v: 3.33 vbat: 3.28
Repos:
Packages: pm: dpkg pkgs: 2189 libs: 1118 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 201 Uptime: 18m wakeups: 1 Memory: 7.62 GiB used: 1.25 GiB (16.4%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
I cannot duplicate. I suggest checking for unfinished updates.i_ri wrote: Sat Jun 24, 2023 11:00 pm hello dolphin_oracle
systemd
i reported that kde not running on systemd.
now turned to xfce trial using systemd does not start.
forced into root account it says it is hung on power manager.
no shutdown buttons are all broken.
halt.
back to sysV everything works sysV.Code: Select all
System: Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash Desktop: Fluxbox v: 1.3.7 vt: 7 dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15 2023 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Desktop System: HP-Pavilion product: AY022AA-ABA p6330f v: N/A serial: <superuser required> Chassis: Hewlett-Packard type: 3 serial: <superuser required> Mobo: MSI model: IONA v: 1.0 serial: <superuser required> BIOS: American Megatrends v: 5.15 date: 06/25/2010 CPU: Info: model: Intel Core i3 530 bits: 64 type: MT MCP arch: Westmere gen: core 1 level: v2 built: 2010-11 process: Intel 32nm family: 6 model-id: 0x25 (37) stepping: 2 microcode: 0x11 Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB Speed (MHz): avg: 1455 high: 1459 min/max: 1200/2933 scaling: driver: acpi-cpufreq governor: ondemand cores: 1: 1455 2: 1459 3: 1448 4: 1459 bogomips: 23410 Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 Vulnerabilities: <filter> Graphics: Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-5.75 process: Intel 45nm built: 2010 ports: active: VGA-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0042 class-ID: 0300 Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: intel dri: crocus gpu: i915 display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: VGA-1 mapped: VGA1 model: AOC 2436 serial: <filter> built: 2010 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 API: OpenGL v: 2.1 Mesa 22.3.6 renderer: Mesa Intel HD Graphics (ILK) direct-render: Yes Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard 5 driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d800 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> RAID: Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: c080 bus-ID: 00:1f.2 chip-ID: 8086:2822 rev: N/A class-ID: 0104 Drives: Local Storage: total: 1.82 TiB used: 15.21 GiB (0.8%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: DT01ACA200 size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: ABB0 scheme: MBR Partition: ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 15.21 GiB (0.8%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile Sensors: System Temperatures: cpu: 30.2 C mobo: 21.6 C Fan Speeds (RPM): cpu: 821 fan-2: 866 fan-3: 0 Power: 12v: N/A 5v: N/A 3.3v: 3.33 vbat: 3.28 Repos: Packages: pm: dpkg pkgs: 2189 libs: 1118 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0 pm: flatpak pkgs: 0 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free Info: Processes: 201 Uptime: 18m wakeups: 1 Memory: 7.62 GiB used: 1.25 GiB (16.4%) Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26 Boot Mode: BIOS (legacy, CSM, MBR)
It should be able to keep a partition to itself, and UPDATE it not format it all...keos wrote: Sat Jun 24, 2023 8:10 am Ventoy installs but deletes/formats everything ...
I was installing this option: Source code (tar.gz)
Switch for option:
ventoy-1.0.93-linux.tar.gz
and it worked correctly![]()
... but it erased the previously installed system: MX-21![]()
*During the installation it said something like it was going to format the "device", I assumed it was the partition inside the corresponding ventoy ... not all of it ...![]()
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Intel product: Intel powered classmate PC v: Clamshell
serial: <superuser required> Chassis: NULL type: 9 v: 0.1 serial: <superuser required>
Mobo: Intel model: Intel powered classmate PC v: Clamshell serial: <superuser required>
UEFI: Phoenix v: MPBYT10A.88F.0039.2016.0622.1403 date: 06/22/2016
Battery:
ID-1: BAT1 charge: 27.7 Wh (86.0%) condition: 32.2/36.6 Wh (87.9%) volts: 11.6 min: 11.1
model: ECS CMPC type: Li-ion serial: <filter> status: discharging
CPU:
Info: model: Intel Celeron N2808 bits: 64 type: MCP arch: Silvermont level: v2 built: 2013-15
process: Intel 22nm family: 6 model-id: 0x37 (55) stepping: 8 microcode: 0x838
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 112 KiB desc: d-2x24 KiB; i-2x32 KiB
L2: 1024 KiB desc: 1x1024 KiB
Speed (MHz): avg: 568 high: 636 min/max: 500/2249 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 500 2: 636 bogomips: 6333
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display vendor: Elite Systems
driver: i915 v: kernel arch: Gen-7 process: Intel 22nm built: 2012-13 ports: active: eDP-1
empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0f31 class-ID: 0300
Device-2: Chicony USB 2.0 Camera type: USB driver: uvcvideo bus-ID: 1-3.1:5 chip-ID: 04f2:b445
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: eDP-1 model: ChiMei InnoLux 0x1040 built: 2013 res: 1366x768 hz: 60 dpi: 156
gamma: 1.2 size: 222x125mm (8.74x4.92") diag: 255mm (10") ratio: 16:9 modes: 1366x768
API: OpenGL v: 4.2 Mesa 22.3.6 renderer: Mesa Intel HD Graphics (BYT) direct-render: Yes
Audio:
Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio vendor: Elite Systems
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:0f04 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 01:00.0 chip-ID: 10ec:b723
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Elite Systems driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 1000 bus-ID: 02:00.0 chip-ID: 10ec:8136
class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Realtek RTL8723B Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-3.3:7
chip-ID: 0bda:b723 class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 9 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 9f73 hci-v: 4.0 rev: e2f
Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 465.76 GiB used: 44.1 GiB (9.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD5000LPCX-22VHAT0 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 1A01 scheme: GPT
Partition:
ID-1: / raw-size: 39.06 GiB size: 38.15 GiB (97.67%) used: 6.58 GiB (17.3%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 4.9 MiB (1.0%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 301 GiB size: 295.21 GiB (98.08%) used: 37.51 GiB (12.7%) fs: ext4
dev: /dev/sda4 maj-min: 8:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.01 GiB used: 6.6 MiB (0.1%) priority: -2 dev: /dev/sda6
maj-min: 8:6
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2060 libs: 1041 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 196 Uptime: 1d 7h 14m wakeups: 20 Memory: 3.7 GiB used: 1.69 GiB (45.6%)
Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI