MX Linux Forum

Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/

MX-23 beta 2 feedback thread

http://www.forum.mxlinux.org/viewtopic.php?t=75618

Page 27 of 59

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 6:52 am
by Jerry3904
@i_ri
custom-toolbox should be a default install on all iso s. xfce, kde, mxfluxbox.
<custom-toolbox> needs to be a dependency for <mx-fluxbox>; right now mx-fluxbox installs without custom-toolbox.
The MXFB Settings Manager is using it, so you might want to check again

Code: Select all

apt policy custom-toolbox

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 7:01 am
by gRegNfo
siamhie wrote: Fri Jun 23, 2023 11:23 pm
fehlix wrote: Fri Jun 23, 2023 3:48 pm Some "cosmetic" errors do still show up:

Code: Select all

Error: /ventoy/hook/debian/antix-disk.sh: line 43: vtoy_unsquashfs: not found
Error: /ventoy/hook/debian/antix-disk.sh: line 49: vtoy_unsquashfs: not found
but seems not to prevent from booting.
You can view the live-log on screen with disabled splasht-screen or with [Alt]+F1 on VT1
or on live booted either on command line with colors

Code: Select all

less -R /var/log/live/initrd.log.color
ventoy-hook-error.jpg
or just using "Quick System Info" tool:
ventoy-live-log.jpg

Will do @fehlix when RC rolls out. In the mean time, ISO's seem to boot without the antiX error message.
I already addressed the github team the GTK GUI errors I got, but it still works and installs... just some minor stuff.
You should think about checking it and help addressing your issues with the Ventoy team directly? here:
https://github.com/ventoy/Ventoy/issues

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 7:28 am
by fehlix
gRegNfo wrote: Sat Jun 24, 2023 6:52 am I tried installing MX 21.3 on some old machine (dual core from 2008??) from network through PXE.
I had similar error like the VENTOY ones.
Don't know if it's the PXE firmware version...

I managed to boot from PE based disk management like AOMEI and MACRIUM though...

PXE-Boot-MX213.jpg
I believe the current MX/antiX live system won't boot through PXE.

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 7:56 am
by i_ri
Hello Jerry3904

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 8:10 am
by keos
Ventoy installs but deletes/formats everything ...

I was installing this option: Source code (tar.gz)

Switch for option:

ventoy-1.0.93-linux.tar.gz

and it worked correctly :happy:

... but it erased the previously installed system: MX-21 :eek:

*During the installation it said something like it was going to format the "device", I assumed it was the partition inside the corresponding ventoy ... not all of it ... :mad:

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 8:29 am
by fehlix
keos wrote: Sat Jun 24, 2023 8:10 am Ventoy installs but deletes/formats everything ...
Note: This is not a How to use ventoy thread, but a MX23-beta2 feadback thread.
Please read ventoy FAQ or Help and README provided by ventoy.
Thanks

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 8:35 am
by j2mcgreg
@keos wrote:
*During the installation it said something like it was going to format the "device", I assumed it was the partition inside the corresponding ventoy ... not all of it ... :mad:
That's the default behaviour for a USB creation tool. You should chalk this one up to a learning experience, Always, always, if you are going to reuse USB drives for this purpose, check them first to be sure that they contain nothing important.

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 9:09 am
by keos
Well I will keep it in mind ... :exclamation: but the previous one never formatted me ... :confused:

Re: MX-23 beta 2 feedback thread

Posted: Sat Jun 24, 2023 9:35 am
by Adrian
i_ri wrote: Sat Jun 24, 2023 3:30 am hello dolphin_oracle
custom-toolbox 23.6
keyboard Enter key Return
is locked onto the bottom frame of buttons
About, Help, Edit, Close >Return coincides.

Navigating the highlight to a Category item entry
additionally places the highlight on About,
key Return of a highlighted Category item
brings the About page.
Search the same; >Return brings About.
Thanks, I think I fixed that, for some reason autdefault for buttons in Qt is weird.

WiFi Finder is unstable

Posted: Sat Jun 24, 2023 10:13 am
by Frankarnold
... sometimes not finding any wifi devices, on next boot finding the device and all available connections

Code: Select all

System:
  Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: TREKSTOR product: Surfbook A13B v: N/A serial: <superuser required>
  Mobo: TS_inet model: Geminilake_PN5_V01 serial: <superuser required> UEFI: American Megatrends
    v: BIOS_V1.2.4 date: 07/23/2018
Battery:
  ID-1: BAT0 charge: 24.8 Wh (70.9%) condition: 35.0/35.0 Wh (100.0%) volts: 7.6 min: N/A
    model: GLK MRD Li-ion Battery type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: Intel Pentium Silver N5000 bits: 64 type: MCP arch: Goldmont Plus level: v2
    built: 2017 process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 1 microcode: 0x3E
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 224 KiB desc: d-4x24 KiB; i-4x32 KiB
    L2: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1182 high: 1309 min/max: 800/2700 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1055 2: 1309 3: 1193 4: 1172 bogomips: 8755
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel GeminiLake [UHD Graphics 605] driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:3184 class-ID: 0300
  Device-2: Alcor Micro USB 2.0 Web Camera type: USB driver: uvcvideo bus-ID: 1-7:5
    chip-ID: 058f:5608 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: Najing CEC Panda LC133LF4L01 built: 2015 res: 1920x1080 hz: 60 dpi: 166
    gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 605 (GLK 3) direct-render: Yes
Audio:
  Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio vendor: Realtek
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_apl bus-ID: 00:0e.0
    chip-ID: 8086:3198 class-ID: 0403
  API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:3165 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-4:3
    chip-ID: 8087:0a2a class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 1000 hci-v: 4.2 rev: 1000
  Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 57.62 GiB used: 9.13 GiB (15.8%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: NCard size: 57.62 GiB block-size: physical: 512 B
    logical: 512 B type: SSD serial: <filter> rev: 0x8 scheme: GPT
  SMART Message: Unknown smartctl error. Unable to generate data.
Partition:
  ID-1: / raw-size: 57.36 GiB size: 56.16 GiB (97.91%) used: 9.13 GiB (16.3%) fs: ext4
    dev: /dev/mmcblk0p2 maj-min: 179:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/mmcblk0p1 maj-min: 179:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
  System Temperatures: cpu: 49.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2056 libs: 1041 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
  Processes: 207 Uptime: 6m wakeups: 2 Memory: 3.66 GiB used: 1.66 GiB (45.3%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
All times are UTC-04:00
Page 27 of 59

Powered by phpBB® Forum Software © phpBB Limited