Page 26 of 42
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 2:46 pm
by dolphin_oracle
v17564 wrote: Thu Aug 29, 2019 2:25 pm
Hi Old Gita (again).
I post some image for clarified where i see the translation to Spanish issue.
- MX tweak -> Others
Change "Habilitar un solo click en Thunar gestor de archivos"
If only affect to Thunar: "Habilitar un solo click en el gestor de archivos Thunar"
or if affect to any file manager, others differents to Thunar: "Habilitar un solo click en el gestor de archivos"
Change "Mostrar marco de systray (área de notificación)" to "Mostrar marco en el área de notificación"
Change "Mostrar ventanas de tod
os las áreas de trabajo en el panel" to "Mostrar ventanas de tod
as las áreas de trabajo en el panel"
MX-Tweak - Otros.png
- Thunar
Thunar.png
- Menu Whisker -> Configuration
Configuracion.png
If you need more information not dudde in asking me for it.
Greetings.
we appreciate the help, but this is much easier on our end if you sign up for an account on transifex and submit translation changes that way. Submitting them hear is a very manual process.
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 4:47 pm
by Jerry3904
On the Live screen, down in the corner, it says use F1 to see, F10 to restore
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 6:19 pm
by Old Giza
v17564 wrote: Thu Aug 29, 2019 2:25 pm
Hi Old Gita (again).
I post some image for clarified where i see the translation to Spanish issue.
- MX tweak -> Others
Change "Habilitar un solo click en Thunar gestor de archivos"
If only affect to Thunar: "Habilitar un solo click en el gestor de archivos Thunar"
or if affect to any file manager, others differents to Thunar: "Habilitar un solo click en el gestor de archivos"
Change "Mostrar marco de systray (área de notificación)" to "Mostrar marco en el área de notificación"
Change "Mostrar ventanas de tod
os las áreas de trabajo en el panel" to "Mostrar ventanas de tod
as las áreas de trabajo en el panel"
Thanks for informing us of these translation improvements. I carried them out on Transifex. The others relate to Xfce over which I have no control.
As dolphin_oracle says, it's simpler to make these changes directly through Transifex. We welcome your input. Please send me a personal message, or continue the discussion in the
Translations forum (start a new topic).
Xfce also uses Transifex, so if you want to contribute, you can easily do for both Xfce and MX.
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 6:28 pm
by KBD
dolphin_oracle wrote: Thu Aug 29, 2019 2:44 pm
does it go black, or does it still have text on the screen.
if black, try the i915.invert_brightness=1 as a boot parameter. or try just adjusting the brightness (up and down, because the values could be backwards) after waiting a while. I have 2 lenovo cheapies that do this. its annoying, and yes, they both worked fine on 18.3, but exhibit this issue on 19. antiX has the same issue on those machines (lenovo s21e and a ideapad 110s)
I tried the i915 boot parameter but it is still getting stuck right before plymouth. I get a completely black screen with a tiny semi-white 'promt' at the top left corner, but it is frozen at this point and will do nothing.
Edit: adjusting the screen brightness changes the background color a bit, but nothing else has any affect.
Edit2: it will boot in failsafe. Would be interested to know why it won't boot otherwise.
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 6:46 pm
by KBD
My system info:
Code: Select all
Host: mx1 Kernel: 4.19.0-5-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19beta-1_x64 patito feo August 25 2019 base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: LENOVO product: 20GB000LUS v: ThinkPad 11e 3rd Gen
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: LENOVO model: Intel powered classmate PC v: SDK0J40697 WIN serial: <filter>
UEFI [Legacy]: LENOVO v: R0AET27W (1.10) date: 04/22/2016
Battery: ID-1: BAT1 charge: 41.6 Wh condition: 41.6/42.0 Wh (99%) volts: 12.4/11.2
model: SMP LNV-00HW44 type: Li-poly serial: <filter> status: Full
CPU: Topology: Quad Core model: Intel Celeron N3150 bits: 64 type: MCP arch: Airmont
family: 6 model-id: 4C (76) stepping: 3 microcode: 368 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 12800
Speed: 1423 MHz min/max: 480/2080 MHz Core speeds (MHz): 1: 808 2: 928 3: 945 4: 1432
Vulnerabilities: Type: l1tf status: Not affected
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Graphics: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated
Graphics
vendor: Lenovo driver: N/A bus ID: 00:02.0 chip ID: 8086:22b1
Display: x11 server: X.Org 1.20.4 driver: vesa resolution: 1368x768~N/A
OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.3.6 compat-v: 3.1
direct render: Yes
Audio: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High
Definition Audio
vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:2284
Sound Server: ALSA v: k4.19.0-5-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo
driver: r8169 v: kernel port: 1000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: 1000 bus ID: 03:00.0
chip ID: 8086:095b
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 122.99 GiB used: 289.7 MiB (0.2%)
ID-1: /dev/sda vendor: Samsung model: MZNLF128HCHP-000L1 size: 119.24 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1L4Q scheme: GPT
ID-2: /dev/sdb type: USB vendor: SanDisk model: SanDisk Cruzer size: 3.75 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 8.02 scheme: MBR
Partition: ID-1: / raw size: N/A size: 6.04 GiB used: 289.7 MiB (4.7%) fs: overlay
source: ERR-102
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/buster buster main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 217 Uptime: 11m Memory: 7.62 GiB used: 1.06 GiB (13.8%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 7:14 pm
by dolphin_oracle
stupid nvidia postinst script.
bug report over at bugs.debian.org.
https://bugs.debian.org/cgi-bin/bugrepo ... bug=928497
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 8:25 pm
by Stevo
davemx wrote: Wed Aug 28, 2019 3:27 pm
System Sounds.
Sorry if this is covered already, but there is a superfluous line at the end of the
/usr/bin/logoutsound-mx file. I don't think it's actually causing a problem, but it has the potential to do so if xfce changes its code. That line is
xfce4-session-logout. It's already in the process of logging out!
Also, it needs 3 entries in Session & Startup. One, as now for logout, one for restart and one for shutdown.
Could that be why we see the login screen for a second or more as we're shutting down now? Some testers have remarked about that.
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 9:09 pm
by dolphin_oracle
Stevo wrote: Thu Aug 29, 2019 8:25 pm
davemx wrote: Wed Aug 28, 2019 3:27 pm
System Sounds.
Sorry if this is covered already, but there is a superfluous line at the end of the
/usr/bin/logoutsound-mx file. I don't think it's actually causing a problem, but it has the potential to do so if xfce changes its code. That line is
xfce4-session-logout. It's already in the process of logging out!
Also, it needs 3 entries in Session & Startup. One, as now for logout, one for restart and one for shutdown.
Could that be why we see the login screen for a second or more as we're shutting down now? Some testers have remarked about that.
don't know, but its updated and fixed now
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 10:07 pm
by jj1j1
For a beta mx 19 works great. Props to the developers. One small thing that I didn't see mentioned before has to do with restarting, or shutting down the system. When buttons in xfce panel is clicked the logon screen will appear for about 2 or 3 seconds then changes to normal shutdown screen.
Uh, cough, cough, I guess I should have read a few posts above...
Re: MX-19 Beta 1 Feedback
Posted: Thu Aug 29, 2019 10:16 pm
by dolphin_oracle
jj1j1 wrote: Thu Aug 29, 2019 10:07 pm
For a beta mx 19 works great. Props to the developers. One small thing that I didn't see mentioned before has to do with restarting, or shutting down the system. When buttons in xfce panel is clicked the logon screen will appear for about 2 or 3 seconds then changes to normal shutdown screen.
Uh, cough, cough, I guess I should have read a few posts above...
I'm afraid that is a hangup from not using systemd. I think. Maybe. Its been that way for a while. On the other hand you know you are logged out!