MX Linux Forum

Code: Select all

System:
  Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_US kbd=jp tz=Etc/UTC
  Desktop: MATE v: 1.26.0 info: mate-panel wm: marco v: 1.26.1 vt: 7 dm: LightDM v: 1.26.0
    Distro: MX-23_beta2_x64 Libretto June 15 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Laptop System: TOSHIBA product: dynabook B65/H v: PB65HNB41R7AD11
    serial: <superuser required> Chassis: type: 10 v: Version 1.0 serial: <superuser required>
  Mobo: TOSHIBA model: 50M PCBA 1 v: Version A0 serial: <superuser required> UEFI: TOSHIBA
    v: Version 1.30 date: 01/23/2018
Battery:
  ID-1: BAT1 charge: 25.5 Wh (63.1%) condition: 40.4/44.4 Wh (91.0%) volts: 14.8 min: 14.8
    model: G71C000JM610 type: Li-ion serial: N/A status: charging
CPU:
  Info: model: Intel Celeron 3865U bits: 64 type: MCP arch: Amber/Kaby Lake note: check level: v2
    built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 9 microcode: 0x70
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 512 KiB desc: 2x256 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1800 min/max: 400/1800 scaling: driver: intel_pstate governor: powersave
    cores: 1: 1800 2: 1800 bogomips: 7200
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel HD Graphics 610 vendor: Toshiba driver: i915 v: kernel arch: Gen-9.5
    process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:5906 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: marco v: 1.26.1 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x15db built: 2015 res: 1366x768 hz: 60 dpi: 101
    gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 610 (KBL GT1)
    direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Toshiba driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl,snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-V vendor: Toshiba driver: e1000e v: kernel port: N/A
    bus-ID: 00:1f.6 chip-ID: 8086:15d8 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24fd class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-8:3
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 480.52 GiB used: 2.01 GiB (0.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABF050 size: 465.76 GiB block-size:
    physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 6M
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Buffalo model: USB Flash Disk size: 14.76 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 7.93 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda5
    maj-min: 8:5
Sensors:
  System Temperatures: cpu: 41.0 C pch: 37.5 C mobo: N/A
  Fan Speeds (RPM): cpu: 3420
Repos:
  Packages: pm: dpkg pkgs: 2101 libs: 1059 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 191 Uptime: 24m wakeups: 2056 Memory: 7.68 GiB used: 2.05 GiB (26.7%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Code: Select all

Section "InputClass"
Identifier "touchpad"
Driver "libinput"
  MatchIsTouchpad "on"
  Option "Tapping" "on"
  Option "TappingButtonMap" "lmr"
  Option "AccelSpeed" "0.075"
  Option "SendEventsMode" "disabled-on-external-mouse"
EndSection

Code: Select all

started
(K3b::ActivePipe) successfully opened pipe.
(K3b::ActivePipe) writing from K3b::Process(0x55a56c0b42f0) to K3b::Process(0x55a56c156de8)
(mkisofs)  "I: -input-charset not specified, using utf-8 (detected in locale settings)"
(mkisofs)  "Using QUINTET000.PNG;1 for  Pictures/Quintet.png (quintet.png)"
(growisofs)  "Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'"
"Writing data"
(mkisofs)  "Total translation table size: 0"
(mkisofs)  "Total rockridge attributes bytes: 4333"
(mkisofs)  "Total directory bytes: 10600"
(mkisofs)  "Path table size(bytes): 42"
(mkisofs)  "Max brk space used 0"
Read failed: "Unknown error"
Done: "write success" "read failed" (total bytes read/written: 125126656 / 125126656 )
"Flushing Cache"
"Closing Track"
"Closing Session"
"/dev/sr0"
received finished signal!
starting command:  "(CommandEject)"
kf.notifications: Audio notification requested, but sound file from notifyrc file was not found, aborting audio notification
Resetting medium in "/dev/sr0"

Code: Select all

cdrecord has no permission to open the device.
Modify device settings in K3b to solve this problem.