Page 22 of 25
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Fri Sep 17, 2021 2:19 pm
by gour
fehlix wrote: Fri Sep 17, 2021 12:06 pm
Post /etc/default/locale
If it contains the "desired" result, logoff/login.
Here it is:
Code: Select all
$ cat /etc/default/locale
# File generated by update-locale
LANG=hr_HR.UTF-8
LANGUAGE=
LC_MESSAGES=en_GB.UTF-8
LC_NAME=hr_HR.UTF-8
LC_TIME=hr_HR.UTF-8
LC_PAPER=hr_HR.UTF-8
LC_TELEPHONE=hr_HR.UTF-8
LC_MONETARY=hr_HR.UTF-8
LC_CTYPE=en_GB.UTF-8
LC_IDENTIFICATION=hr_HR.UTF-8
LC_ADDRESS=hr_HR.UTF-8
LC_COLLATE=hr_HR.UTF-8
LC_MEASUREMENT=hr_HR.UTF-8
LC_NUMERIC=hr_HR.UTF-8
and, as you can see it does differ in the value of LANG variable which is set to en_GB.UTF-8 in my locale.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Fri Sep 17, 2021 2:33 pm
by fehlix
gour wrote: Fri Sep 17, 2021 2:19 pm
fehlix wrote: Fri Sep 17, 2021 12:06 pm
Post /etc/default/locale
If it contains the "desired" result, logoff/login.
Here it is:
Code: Select all
$ cat /etc/default/locale
# File generated by update-locale
LANG=hr_HR.UTF-8
LANGUAGE=
LC_MESSAGES=en_GB.UTF-8
LC_NAME=hr_HR.UTF-8
LC_TIME=hr_HR.UTF-8
LC_PAPER=hr_HR.UTF-8
LC_TELEPHONE=hr_HR.UTF-8
LC_MONETARY=hr_HR.UTF-8
LC_CTYPE=en_GB.UTF-8
LC_IDENTIFICATION=hr_HR.UTF-8
LC_ADDRESS=hr_HR.UTF-8
LC_COLLATE=hr_HR.UTF-8
LC_MEASUREMENT=hr_HR.UTF-8
LC_NUMERIC=hr_HR.UTF-8
and, as you can see it does differ in the value of LANG variable which is set to en_GB.UTF-8 in my locale.
You would select the desired LANG at the login screen,
it defaults to the system LANG
but remembers last chosen within
~/.dmrc
which is than pre-selected as login LANG locale
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Fri Sep 17, 2021 3:47 pm
by SwampRabbit
@asqwerth gotcha on the docklike issue, I’ll be packaging a newer version with that setup later tonight.
On the other package you gave me stuff to customize … it starts with Skippy and ends in XD.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Sat Sep 18, 2021 3:08 am
by gour
fehlix wrote: Fri Sep 17, 2021 2:33 pm
You would select the desired LANG at the login screen,
it defaults to the system LANG
but remembers last chosen within
~/.dmrc
which is than pre-selected as login LANG locale
Thank you very much. That was the explanation which I needed!
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Sat Sep 18, 2021 3:39 pm
by Feuerkl1nge
dolphin_oracle wrote: Thu Sep 16, 2021 6:07 am
Screenshot please? We don’t have a setting called “show vertical panel”.
I'm doing some other work on mx-tweak now so your timing is good.
No prob but some delays of my life.
Here chronological behaviour.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Sat Sep 18, 2021 4:11 pm
by dolphin_oracle
oh if both boxes are unchecked then no change is actually made. I suppose I should make those such that one has to be checked.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Sun Sep 19, 2021 7:05 am
by mxlinuxuser
Hello All,
Need help with installing MXLinux 21 Beta 2 on Generation 2 Hyper-V VM running on Windows 10.
Here follows the system information:
Code: Select all
System: Host: <filter> Kernel: 4.19.0-17-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-17-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19.4_x64 patito feo March 31 2021 base: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop System: Microsoft product: Virtual Machine v: Hyper-V UEFI Release v4.0
serial: <filter>
Mobo: Microsoft model: Virtual Machine v: Hyper-V UEFI Release v4.0 serial: <filter>
UEFI: Microsoft v: Hyper-V UEFI Release v4.0 date: 11/01/2019
Battery: ID-1: BAT1 charge: 4.9 Wh condition: 5.0/5.0 Wh (100%) volts: 5.0/5.0
model: Microsoft Hyper-V Virtual BatterVirtual type: Unknown serial: <filter>
status: Unknown cycles: -1
CPU: Topology: Dual Core model: Intel Core i7-2860QM bits: 64 type: MT MCP
arch: Sandy Bridge family: 6 model-id: 2A (42) stepping: 7 microcode: FFFFFFFF
L2 cache: 8192 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 19935
Speed: 2492 MHz min/max: N/A Core speeds (MHz): 1: 2492 2: 2492 3: 2492 4: 2492
Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable
Type: l1tf mitigation: PTE Inversion
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT Host state unknown
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Message: No Device data found.
Display: x11 server: X.Org 1.20.4 driver: fbdev resolution: 1152x864~N/A
OpenGL: renderer: llvmpipe (LLVM 7.0 256 bits) v: 3.3 Mesa 18.3.6 compat-v: 3.1
direct render: Yes
Audio: Message: No Device data found.
Network: Message: No Device data found.
IF-ID-1: eth0 state: up speed: 10000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 24.00 GiB used: 6.28 GiB (26.2%)
ID-1: /dev/sda model: Virtual Disk size: 17.00 GiB block size: physical: 4096 B
logical: 512 B serial: N/A rev: 1.0 scheme: GPT
ID-2: /dev/sdb model: Virtual Disk size: 7.00 GiB block size: physical: 4096 B
logical: 512 B serial: N/A rev: 1.0 scheme: GPT
Partition: ID-1: / raw size: 14.90 GiB size: 14.60 GiB (98.01%) used: 6.23 GiB (42.7%) fs: ext4
dev: /dev/sda3
ID-2: /home raw size: 7.00 GiB size: 6.83 GiB (97.54%) used: 50.5 MiB (0.7%) fs: ext4
dev: /dev/sdb1
ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda2
Sensors: Message: No sensors data was found. Is sensors configured?
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://ftpmirror1.infania.net/mirror/mxlinux/packages/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 180 Uptime: 9m Memory: 1.88 GiB used: 505.2 MiB (26.2%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in
running in: quick-system-in inxi: 3.0.36
I have inserted MX-21_beta2_x64.iso into DVD drive, the DVD drive is added to the same and only one SCSI controller in this VM.
In boot order, boot from DVD is set as first entry.
When I start this VM, it boots from DVD, however, when I select the first GRUB entry to boot into, it fails to find boot device
with error that no block device found and then I can't proceed with installation.
This VM is currently running MX Linux 19.4 which I installed same way as mentioned above.
Please let me know if any more data is needed.
Please help on how I can proceed installing, what is missing here.
Thanks.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Sun Sep 19, 2021 9:06 am
by SwampRabbit
@mxlinuxuser I had a coworker/friend install the Beta on a Gen 2 Hyper-V VM running on server 2019, if someone doesn't help you through this, I'll be reaching out to him later today.
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Mon Sep 20, 2021 3:26 am
by mxlinuxuser
Thanks @SwampRabbit, hopefully someone gets a chance to see the issue I am facing.
It seems something is broken between MX Linux 19.4 and MX Linux 21 Beta 2 for Gen 2 hyper-V VM,
as MX Linux 19.4 installed like a charm!
Re: MX-21 beta 2 feedback thread (xfce)
Posted: Mon Sep 20, 2021 11:53 pm
by SwampRabbit
@mxlinuxuser I haven't been able to get that info for you yet, in the meantime, you might want to hunt around the web for "Hyper-V Gen II"+"Debian 11"