Page 20 of 59
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 12:22 pm
by fehlix
user-green wrote: Wed Jun 21, 2023 11:33 am
Dear Developers,
I think that the bug below may still be confirmed in Beta 2. The icon for the installed package of Firefox is concealed.
You may want to give more details:
"MX Package Installer" latest version 23.6 displays here correctly:
with system locale in English:
mxpi_en.jpg
and also in Japanese:
mxpi_ja.jpg
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 12:37 pm
by megaherz33
Hi!
I tried to install MX Linux 23 on the main PC, the same "Critical error"
MX Linux 21.3 installs without problems.
P.S.I will wait for the update 21.3 to 23.
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 1:16 pm
by siamhie
megaherz33 wrote: Wed Jun 21, 2023 12:37 pm
Hi!
I tried to install MX Linux 23 on the main PC, the same "Critical error"
MX Linux 21.3 installs without problems.
P.S.I will wait for the update 21.3 to 23.
@megaherz33 If you are trying to install using Ventoy, follow my steps I posted on the previous page.
viewtopic.php?p=730181#p730181
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 1:27 pm
by siamhie
fehlix wrote: Wed Jun 21, 2023 12:22 pm
user-green wrote: Wed Jun 21, 2023 11:33 am
Dear Developers,
I think that the bug below may still be confirmed in Beta 2. The icon for the installed package of Firefox is concealed.
You may want to give more details:
"MX Package Installer" latest version 23.6 displays here correctly:
with system locale in English:mxpi_en.jpg
and also in Japanese:mxpi_ja.jpg
@fehlix Same problem. I have xmms and librewolf installed but popular apps doesn't show it until I start typing in at least two characters into the search field. MXPI version 23.6
mxpi.png
mxpi2.png
mxpi3.png
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 1:30 pm
by megaherz33
siamhie wrote: Wed Jun 21, 2023 1:16 pm
megaherz33 wrote: Wed Jun 21, 2023 12:37 pm
Hi!
I tried to install MX Linux 23 on the main PC, the same "Critical error"
MX Linux 21.3 installs without problems.
P.S.I will wait for the update 21.3 to 23.
@megaherz33 If you are trying to install using Ventoy, follow my steps I posted on the previous page.
viewtopic.php?p=730181#p730181
I updated the flash drive using Ventoy-Linux. Same error.
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 1:35 pm
by jasalt
iPhone USB network tethering seems to work only when booting using systemd.
Testing with fresh MX-23 Beta 2 installation and `libimobiledevice-utils` package installed. The `idevicepair pair` command doesn't initiate connection with USB connected iPhone (SE 2020) and simply returns "No device found." without any reaction on the phone.
USB network tethering and idevice*-commands are working after booting with systemd. When connecting USB cable the phone asks if the computer is to be trusted after which computer gets connected through it's mobile network as it does with stock Debian (or Mac).
File management on iOS / iDeviceMounter remains broken regardless of init system, but noted from other threads that it's a known issue.
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
resume=UUID=<filter> resume_offset=2368768
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_beta2_x64 Libretto
June 15 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: LENOVO product: 20L6S7PC00 v: ThinkPad T480 serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 20L6S7PC00 v: SDK0J40697 WIN serial: <superuser required> UEFI: LENOVO
v: N24ET72W (1.47 ) date: 01/03/2023
Battery:
ID-1: BAT0 charge: 16.6 Wh (79.4%) condition: 20.9/21.3 Wh (97.9%) volts: 12.4 min: 11.4
model: LGC 421 type: Li-poly serial: <filter> status: not charging cycles: 29
ID-2: BAT1 charge: 13.0 Wh (79.3%) condition: 16.4/23.9 Wh (68.3%) volts: 12.7 min: 11.4
model: LGC 01AV490 type: Li-poly serial: <filter> status: charging cycles: 528
CPU:
Info: model: Intel Core i5-8350U bits: 64 type: MT MCP arch: Coffee Lake gen: core 8 level: v3
note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 0xA (10)
microcode: 0xF2
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 1625 high: 1900 min/max: 400/3600 scaling: driver: intel_pstate
governor: powersave cores: 1: 1900 2: 1900 3: 1900 4: 800 5: 1900 6: 800 7: 1900 8: 1900
bogomips: 30399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:5917 class-ID: 0300
Device-2: IMC Networks Integrated Camera type: USB driver: uvcvideo bus-ID: 1-8:3
chip-ID: 13d3:56a6 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: InfoVision Optronics/Kunshan 0x057d built: 2017 res: 1920x1080 hz: 60
dpi: 158 gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 620 (KBL GT2)
direct-render: Yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo ThinkPad T480 driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71
class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15d7 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlan0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:2
chip-ID: 8087:0a2b class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 100 hci-v: 4.2 rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 476.94 GiB used: 27.08 GiB (5.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: PC SN720 SDAQNTW-512G-1001
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 10190101 temp: 44.9 C scheme: GPT
Partition:
ID-1: / raw-size: 161.98 GiB size: 161.98 GiB (100.00%) used: 27.05 GiB (16.7%) fs: btrfs
dev: /dev/nvme0n1p3 maj-min: 259:3
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 30.7 MiB (32.0%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 19.5 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 49.0 C pch: 44.0 C mobo: N/A
Fan Speeds (RPM): fan-1: 0
Repos:
Packages: pm: dpkg pkgs: 2425 libs: 1333 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm ahs
Info:
Processes: 285 Uptime: 0m wakeups: 6 Memory: 15.5 GiB used: 1.31 GiB (8.4%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 1:40 pm
by megaherz33
I'll wait for the update to version 23.
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 2:06 pm
by keos
@siamhie
I already have installed Ventoy into the system and i fallowed this instruction, in order to 'copy' the snaptshot file to ventoy:
After you’ve downloaded your favorite Linux operating system ISO(s), place them on the Ventoy USB device, and allow them to copy over. Copying should take no more than a few minutes.
When copying is finished, reboot the PC and keep the Ventoy USB plugged in. Then, load up the BIOS. Once you’ve loaded up your computer’s BIOS, find the boot options, and configure the system to boot from USB.
You will see a “Ventoy” menu. Ventoy will display all ISO files you’ve added to the system in this menu.
but it do not work
"... place them on the Ventoy USB device, and allow them to copy over ..."
and it did ... but after have copied it ... and reboot, (BIOS ...etc):
in the ventoy, is that the failure appears, the already copied system does not boot it.
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 3:03 pm
by FullScale4Me
user-green wrote: Wed Jun 21, 2023 11:33 am
Dear Developers,
I think that the bug below may still be confirmed in Beta 2. The icon for the installed package of Firefox is concealed.
Best regards
With your mouse left hover over the | to left of the word Package.
The mouse cursor should change to <-->
Left-click and hold while pulling right.
Does the icon now appear?
Re: MX-23 beta 2 feedback thread
Posted: Wed Jun 21, 2023 3:10 pm
by FullScale4Me
siamhie wrote: Wed Jun 21, 2023 1:27 pm
fehlix wrote: Wed Jun 21, 2023 12:22 pm
user-green wrote: Wed Jun 21, 2023 11:33 am
Dear Developers,
I think that the bug below may still be confirmed in Beta 2. The icon for the installed package of Firefox is concealed.
You may want to give more details:
"MX Package Installer" latest version 23.6 displays here correctly:
with system locale in English:mxpi_en.jpg
and also in Japanese:mxpi_ja.jpg
@fehlix Same problem. I have xmms and librewolf installed but popular apps doesn't show it until I start typing in at least two characters into the search field. MXPI version 23.6
mxpi.png
mxpi2.png
mxpi3.png
With your mouse left hover over the | to left of the word Package.
The mouse cursor should change to <-->
Left-click and hold while pulling right.
Does the icon now appear?