MX Linux Forum

@fehlix

OK, thanks a lot

hello dolphin_oracle
Sample internet radio monitor conky /MX-Bridouz-strawberry/
.conky/MX-Bridouz-strawb/MX-bridouz_mod-arial-strawb
minimum_width = 220, minimum_height = 300,
maximum_width = 256,
a change from -clem., mediaplayer.py to strawberry sample
looking at radio strawberry; artist, title, coverAlbum. (paste into /MX-TeejeeTech/Process Panel change minimum_width = 220, change y of image -p 56,394 .),
Paste direct into conky /MX-antiX17 looks like,
MX-bridouz_mod-arial-strawb.png
Process Panel-strawb.png
MX-antiX17-strawb.png

using KDE version. Can not get syanptics touchpad driver to work on this version. I prefer it to libinput as it allows touchpad to be disabled when mouse is plugged in. I can use touchpad indicator an do similar but prefer synaptics.
System;

Not clear what you mean with not being able to get it to work, but dId you already try the toggle in MX Tweak > Other tab?

Hi Jerry,
Thanks for the reply. I simply mean the under system setting in KDE Hardware, Input devices, touchpad it will not give the option for disabling touchpad when mouse is plugged in.
Normally with some other distros if I install synaptics touchpad driver from repositories and reboot it then allow this function, but on Beta 2 it does not change anything and it's not offered.
I don't see anything on my install in tweaks that seems to do that either. I tried the setting use intel drivers but all that did was cause my screen to flash. In any event touchpad-indicator works.
But there should be a way to get synaptics working also. I understand this may be a KDE problem and no MX.

Got it, thanks. No help from me for KDE, sorry, but others on the Forum know it well and may be able to help.

trying to copy to the Ventoy:

1 the snapshot finished very fast ... (?)

2 when copy to the ventoy and openned the app to start with the system in ventoy:

Fatal Error:

Could not find file antiX/linufs


Edit:

Instead now I copy it to a USB and it comes out correctly, so the snapshot did its job well, the problem is when copying it to ventoy.

A very simple setup: Just one 64GB eMMC, regular install using the entire disk:
failed to format efi-partition, formatting stops at 11% or 12%
MX-21 ahs: tried N times, never worked, same result with custom install, WHEREAS:
all others did full install with no problem: Win10, Win11, Fedora37, Fedora38, Ubuntu Mint etc.
MX-23-2 beta installed - finally - on 3rd attempt.
Does this make any sense ?

-----------------------------------------------------------------------------------------------------------------------------------------
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: TREKSTOR product: Surfbook A13B v: N/A serial: <superuser required>
Mobo: TS_inet model: Geminilake_PN5_V01 serial: <superuser required> UEFI: American Megatrends
v: BIOS_V1.2.4 date: 07/23/2018
Battery:
ID-1: BAT0 charge: 33.2 Wh (94.9%) condition: 35.0/35.0 Wh (100.0%) volts: 7.6 min: N/A
model: GLK MRD Li-ion Battery type: Li-ion serial: <filter> status: discharging
CPU:
Info: model: Intel Pentium Silver N5000 bits: 64 type: MCP arch: Goldmont Plus level: v2
built: 2017 process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 1 microcode: 0x3E
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 224 KiB desc: d-4x24 KiB; i-4x32 KiB
L2: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 964 high: 1000 min/max: 800/2700 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1000 2: 1000 3: 900 4: 959 bogomips: 8755
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 605] driver: i915 v: kernel arch: Gen-9
process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:3184 class-ID: 0300
Device-2: Alcor Micro USB 2.0 Web Camera type: USB driver: uvcvideo bus-ID: 1-7:5
chip-ID: 058f:5608 class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: Najing CEC Panda LC133LF4L01 built: 2015 res: 1920x1080 hz: 60 dpi: 166
gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 605 (GLK 3) direct-render: Yes
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio vendor: Realtek
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_apl bus-ID: 00:0e.0
chip-ID: 8086:3198 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:3165 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-4:3
chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 1000 hci-v: 4.2 rev: 1000
Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
Local Storage: total: 57.62 GiB used: 8.71 GiB (15.1%)
ID-1: /dev/mmcblk0 maj-min: 179:0 model: NCard size: 57.62 GiB block-size: physical: 512 B
logical: 512 B type: SSD serial: <filter> rev: 0x8 scheme: GPT
SMART Message: Unknown smartctl error. Unable to generate data.
Partition:
ID-1: / raw-size: 57.36 GiB size: 56.16 GiB (97.91%) used: 8.71 GiB (15.5%) fs: ext4
dev: /dev/mmcblk0p2 maj-min: 179:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/mmcblk0p1 maj-min: 179:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2056 libs: 1041 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlin ... s/mx/repo/ bookworm main non-free
Info:
Processes: 214 Uptime: 2m wakeups: 2 Memory: 3.66 GiB used: 1.02 GiB (27.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
--------------------------------------------------------------------------------------------------------------------------------------------

keos wrote: Wed Jun 21, 2023 9:58 am trying to copy to the Ventoy:

1 the snapshot finished very fast ... (?)

2 when copy to the ventoy and openned the app to start with the system in ventoy:

Fatal Error:

Could not find file antiX/linufs


Edit:

Instead now I copy it to a USB and it comes out correctly, so the snapshot did its job well, the problem is when copying it to ventoy.

@keos
You will need to download the ventoy-linux patch.
Once downloaded and unarchived open terminal in folder of unzipped archive and run
where X is the target USB.

The -u switch is for upgrade...it doesn't touch the partition of ISOs.

https://github.com/ventoy/Ventoy/action ... 4976511049 (account required)

Dear Developers,
I think that the bug below may still be confirmed in Beta 2. The icon for the installed package of Firefox is concealed.


The window should be displayed as below:


Best regards