Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/
I also. I installed using whole disk, no pre-partitioning so my home is under root not a separate partition.Eadwine Rose wrote: Sat Oct 19, 2019 8:41 am I wonder how that happens.. was using the latest iso, official SF downloaded RC1.
May be a clue why it failed for me.Eadwine Rose wrote: Sat Oct 19, 2019 8:46 am Mine is not using the whole disk. I have partitions for root, home, and swap set up, and one of those tiny partitions one needs for the UEFI lalala.
hi jayM , i have attached it in post no 136JayM wrote: Sat Oct 19, 2019 7:02 amPlease run MX Tools / Quick System Info, then right-click and paste in a response. (Quick System Info automatically copies the information to your clipboard, already formatted correctly to be pasted in the forum, so just right click / paste and not copy / paste.) Thank you.scatman98 wrote: Sat Oct 19, 2019 1:32 am congrats on the RC1
issue i have is the Monitor on desktop goes blank or freezes, needs a restart.
it is an AMD system with nvidia GPU. using 4.9.`93 kernel, mainly because 4.19.0.6 doesnt work with iridium browser.
Code: Select all
System: Host: mx1 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: quiet splasht
Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19RC1_x64 patito feo October 15 2019 base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: ASUSTeK product: N56JRH v: 1.0 serial: <filter>
Mobo: ASUSTeK model: N56JRH v: 1.0 serial: <filter> BIOS: American Megatrends
v: N56JRH.204 date: 06/12/2019
CPU: Topology: Quad Core model: Intel Core i7-4700HQ bits: 64 type: MT MCP arch: Haswell
family: 6 model-id: 3C (60) stepping: 3 microcode: 17 L2 cache: 6144 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 38311
Speed: 1098 MHz min/max: 800/3400 MHz Core speeds (MHz): 1: 1098 2: 1098 3: 1097
4: 1098 5: 1098 6: 1098 7: 1098 8: 1098
Vulnerabilities: Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Graphics: Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: ASUSTeK
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0416
Device-2: NVIDIA GK106M [GeForce GTX 760M] vendor: ASUSTeK driver: N/A
bus ID: 01:00.0 chip ID: 10de:11e3
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel Haswell Mobile v: 4.5 Mesa 18.3.6 compat-v: 3.0
direct render: Yes
Audio: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio driver: snd_hda_intel
v: kernel bus ID: 00:03.0 chip ID: 8086:0c0c
Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8c20
Sound Server: ALSA v: k4.19.0-6-amd64
Network: Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: AzureWave
driver: ath9k v: kernel port: e000 bus ID: 03:00.0 chip ID: 168c:0032
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK
driver: r8169 v: kernel port: d000 bus ID: 04:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 1.14 TiB used: 59.8 MiB (0.0%)
ID-1: /dev/sda vendor: Seagate model: ST1000LM024 HN-M101MBB size: 931.51 GiB
block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm
serial: <filter> rev: 0001 scheme: MBR
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 3B6Q scheme: MBR
ID-3: /dev/sdc type: USB vendor: Generic model: USB Flash size: 7.62 GiB block size:
physical: 512 B logical: 512 B serial: <filter> rev: 0.00 scheme: MBR
Partition: ID-1: / raw size: N/A size: 6.08 GiB used: 59.8 MiB (1.0%) fs: overlay
source: ERR-102
ID-2: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda1
Sensors: System Temperatures: cpu: 55.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2600
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/buster buster main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 229 Uptime: 14m Memory: 7.68 GiB used: 825.3 MiB (10.5%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3
running in: quick-system-in inxi: 3.0.36
Video Tweaks:
Detected possible Hybrid Graphics
That file is part of the legacy bootloader in the iso. I don't know why it would be missing. It should be inside of the iso-template.richb wrote: Sat Oct 19, 2019 8:10 amCode: Select all
xorriso : FAILURE : Cannot find in ISO image: -boot_image ... bin_path='/boot/isolinux/isolinux.bin' xorriso : UPDATE : 938 files added in 1 seconds xorriso : aborting : -abort_on 'FAILURE' encountered 'FAILURE'