Page 13 of 46
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 1:13 pm
by operadude
dolphin_oracle wrote: Tue May 30, 2023 9:33 am
operadude wrote: Tue May 30, 2023 7:48 am
operadude wrote: Tue May 30, 2023 7:01 am
Thanks @dolphin_oracle :
I really like the logout sound, so thanks for looking into it.
Please point me in the right direction, if I can help with this!
@dolphin_oracle :
Just remembered:
I think MX-23 Alpha2 (Xfce, x64) has the logout sound.
I'll double-check.
Don't know if that helps you.
Let me know if I can help in any way!
the root problem is that Xfce does not actually support the login/logout event sounds. So we work around it.
so the way the original setup worked, the logout sound was played by an "autostart" file that is triggered by logout/reboot/shutdown. The problem as I see it is that with pipewire its very likely teh sound server will be shutdown before the logout sound is played. during alpha we had reports that the logout sound never played despite being configured.
So I removed the feature because I would rather not have it than have it broken.
Ahhh...Too Bad
I really liked that nice "Borealis" sound letting me know that it's time for Biological Halt. Like Being Tucked-In!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:07 pm
by siamhie
@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.
pipewire2.png
Seems wireplumber isn't starting again.
This is from my systemctl status
Code: Select all
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1655 lightdm --session-child 13 16
│ ├─1684 fluxbox
│ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1795 compton
│ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1806 nm-applet
│ ├─1826 /usr/libexec/gvfsd
│ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─2008 xfce4-clipman
│ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
│ ├─2021 /usr/libexec/xdg-desktop-portal
│ ├─2026 /usr/libexec/xdg-document-portal
│ ├─2030 /usr/libexec/xdg-permission-store
│ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
│ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2065 corectrl
│ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2282 conky -c /home/siamhie/.conky/R8/r8
│ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2839 /usr/bin/thunar file:///home/siamhie/
│ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
│ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
│ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
│ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
│ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
│ ├─2877 /usr/libexec/gvfsd-metadata
│ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
│ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
│ ├─3960 xfce4-terminal
│ ├─3982 bash
│ ├─4343 systemctl status
│ └─4344 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
├─init.scope
│ ├─1664 /lib/systemd/systemd --user
│ └─1665 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1682 /usr/bin/pipewire-pulse
└─pipewire.service
└─1680 /usr/bin/pipewire
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
bogomips: 124804
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:24 pm
by dolphin_oracle
siamhie wrote: Tue May 30, 2023 2:07 pm
@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.
pipewire2.png
Seems wireplumber isn't starting again.
This is from my systemctl status
Code: Select all
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1655 lightdm --session-child 13 16
│ ├─1684 fluxbox
│ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1795 compton
│ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1806 nm-applet
│ ├─1826 /usr/libexec/gvfsd
│ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─2008 xfce4-clipman
│ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
│ ├─2021 /usr/libexec/xdg-desktop-portal
│ ├─2026 /usr/libexec/xdg-document-portal
│ ├─2030 /usr/libexec/xdg-permission-store
│ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
│ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2065 corectrl
│ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2282 conky -c /home/siamhie/.conky/R8/r8
│ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2839 /usr/bin/thunar file:///home/siamhie/
│ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
│ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
│ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
│ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
│ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
│ ├─2877 /usr/libexec/gvfsd-metadata
│ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
│ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
│ ├─3960 xfce4-terminal
│ ├─3982 bash
│ ├─4343 systemctl status
│ └─4344 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
├─init.scope
│ ├─1664 /lib/systemd/systemd --user
│ └─1665 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1682 /usr/bin/pipewire-pulse
└─pipewire.service
└─1680 /usr/bin/pipewire
QSI
Code: Select all
System:
Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
init=/lib/systemd/systemd
Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
microcode: 0x8701021
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
bogomips: 124804
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
chip-ID: 1002:73df class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
6.1.0-9-amd64) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
dev: /dev/nvme0n1p3 maj-min: 259:6
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
maj-min: 259:1
Sensors:
System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:24 pm
by siamhie
@dolphin_oracle In the meantime I'm using a quick and dirty fix. I'm manually starting wireplumber at boot for now in my startup file. Sound works again.
Code: Select all
#start pipewire before volumeicon so unmute works
wireplumber &
pipewire-start
sleep 2
volumeicon -c volumeicon-fluxbox &
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:44 pm
by Melber
siamhie wrote: Tue May 30, 2023 12:49 pm
Melber wrote: Tue May 30, 2023 2:58 am
siamhie wrote: Sun May 28, 2023 6:42 pm
...Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.
Did you try manually editing these entries in
~/gtkrc-2.0
Code: Select all
gtk-cursor-theme-name="DMZ-Black"
gtk-cursor-theme-size=0
and
~/.config/gtk-3.0/settings.ini ?
Code: Select all
gtk-cursor-theme-name=DMZ-Black
gtk-cursor-theme-size=0
@Melber All I have in the gtk-2.0 directory is this
Code: Select all
siamhie@mxflux23:~/.config/gtk-2.0
$ ls -a
. .. gtkfilechooser.ini
...
@siamhie gtkrc-2.0 is a file that lives in the home directory.
Has pretty much the same content as ~/.config/gtk-3.0/settings.ini, except that the theme names are quoted
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:47 pm
by operadude
kc1di wrote: Tue May 30, 2023 6:54 am
trying out MX23-KDE. so far looks good will test more today. But no major problems as yet.
good work :)
@operadude. Nice radio :)
@kc1di :Thanks!
Dig the Analog, Dude!
Continuing to test Beta-1 (Xfce). So far, so good!
Also, Loving the Logo -- @ Startup & Shutdown: Nice effects!
Don't know if I mentioned it earlier, but very cool modified apt Updater!
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 2:58 pm
by siamhie
dolphin_oracle wrote: Tue May 30, 2023 2:24 pm
please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.
@dolphin_oracle It doesn't get loaded at boot.
Code: Select all
systemctl --type=service
UNIT LOAD ACTIVE SUB DESCRIPTION >
accounts-daemon.service loaded active running Accounts Service
acpi-fakekey.service loaded active running ACPI fakekey daemon
acpid.service loaded active running ACPI event daemon
alsa-restore.service loaded active exited Save/Restore Sound Card State
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
blk-availability.service loaded active exited Availability of block devices
bluetooth.service loaded active running Bluetooth service
console-setup.service loaded active exited Set console font and keymap
cpufrequtils.service loaded active exited LSB: set CPUFreq kernel parameters
cron.service loaded active running Regular background program processing daemon
cups-browsed.service loaded active running Make remote CUPS printers available locally
dbus.service loaded active running D-Bus System Message Bus
emby-server.service loaded active running Emby Server is a personal media server with apps>
getty@tty1.service loaded active running Getty on tty1
haveged.service loaded active running Entropy Daemon based on the HAVEGE algorithm
hwclock-mx.service loaded active exited save system clock if not running live
ifupdown-pre.service loaded active exited Helper to synchronize boot up for ifupdown
keyboard-setup.service loaded active exited Set the console keyboard layout
kmod-static-nodes.service loaded active exited Create List of Static Device Nodes
lightdm.service loaded active running Light Display Manager
lm-sensors.service loaded active exited Initialize hardware monitoring sensors
loadcpufreq.service loaded active exited LSB: Load kernel modules needed to enable cpufre>
lvm2-monitor.service loaded active exited Monitoring of LVM2 mirrors, snapshots etc. using>
ModemManager.service loaded active running Modem Manager
network-manager.service loaded active running LSB: network connection manager
networking.service loaded active exited Raise network interfaces
NetworkManager.service loaded failed failed Network Manager
nfs-blkmap.service loaded active running pNFS block layout mapping daemon
nfs-idmapd.service loaded active running NFSv4 ID-name mapping service
nfs-mountd.service loaded active running NFS Mount Daemon
nfs-server.service loaded active exited NFS server and services
nfsdcld.service loaded active running NFSv4 Client Tracking Daemon
ntpsec.service loaded active running Network Time Service
openvpn.service loaded active exited OpenVPN service
plymouth-quit-wait.service loaded active exited Hold until boot process finishes up
plymouth-read-write.service loaded active exited Tell Plymouth To Write Out Runtime Data
plymouth-start.service loaded active exited Show Plymouth Boot Screen
polkit.service loaded active running Authorization Manager
rc-local.service loaded active exited /etc/rc.local Compatibility
rpc-statd-notify.service loaded active exited Notify NFS peers of a restart
rpc-statd.service loaded active running NFS status monitor for NFSv2/3 locking.
rpcbind.service loaded active running RPC bind portmap service
rsyslog.service loaded active running System Logging Service
smartmontools.service loaded active running Self Monitoring and Reporting Technology (SMART)>
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running User Login Management
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-sysusers.service loaded active exited Create System Users
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited Coldplug All udev Devices
systemd-udevd.service loaded active running Rule-based Manager for Device Events and Files
systemd-update-utmp.service loaded active exited Record System Boot/Shutdown in UTMP
systemd-user-sessions.service loaded active exited Permit User Sessions
tlp.service loaded active exited TLP system startup/shutdown
udisks2.service loaded active running Disk Manager
ufw.service loaded active exited Uncomplicated firewall
unattended-upgrades.service loaded active running Unattended Upgrades Shutdown
user-runtime-dir@1000.service loaded active exited User Runtime Directory /run/user/1000
user@1000.service loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
I also can't get it to start.
Code: Select all
$ systemctl start wireplumber.service
Failed to start wireplumber.service: Unit wireplumber.service not found.
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:00 pm
by dolphin_oracle
its a user service, like pipewire. which also isn't in your list @siamhie
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:13 pm
by siamhie
dolphin_oracle wrote: Tue May 30, 2023 3:00 pm
its a user service, like pipewire. which also isn't in your list @siamhie
@dolphin_oracle pipewire shows at the bottom. Is that what you were referring to?
Code: Select all
siamhie@mxflux23:~
$ systemctl status
● mxflux23
State: degraded
Units: 399 loaded (incl. loaded aliases)
Jobs: 0 queued
Failed: 1 units
Since: Tue 2023-05-30 05:09:26 PDT; 7h ago
systemd: 1:252.6-1mx23+1
Tainted: local-hwclock
CGroup: /
├─init.scope
│ └─1 /lib/systemd/systemd
├─system.slice
│ ├─ModemManager.service
│ │ └─1115 /usr/sbin/ModemManager
│ ├─accounts-daemon.service
│ │ └─1064 /usr/libexec/accounts-daemon
│ ├─acpi-fakekey.service
│ │ └─1065 /usr/sbin/acpi_fakekeyd -f
│ ├─acpid.service
│ │ └─1066 /usr/sbin/acpid
│ ├─avahi-daemon.service
│ │ ├─1070 "avahi-daemon: running [mxflux23.local]"
│ │ └─1074 "avahi-daemon: chroot helper"
│ ├─bluetooth.service
│ │ └─1072 /usr/libexec/bluetooth/bluetoothd
│ ├─cron.service
│ │ └─1073 /usr/sbin/cron -f
│ ├─cups-browsed.service
│ │ └─1400 /usr/sbin/cups-browsed
│ ├─dbus.service
│ │ ├─1075 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
│ │ └─2180 /usr/libexec/corectrl/corectrl_helper
│ ├─emby-server.service
│ │ └─1401 /opt/emby-server/system/EmbyServer -programdata /var/lib/emby -ffdetect /opt/emby-server/bin/ffdetect -ffmpeg /opt/emby-se>
│ ├─haveged.service
│ │ └─1042 /usr/sbin/haveged --Foreground --verbose=1
│ ├─lightdm.service
│ │ ├─1414 /usr/sbin/lightdm
│ │ └─1437 /usr/lib/xorg/Xorg -dpi "\$DPI" :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
│ ├─network-manager.service
│ │ └─1176 /usr/sbin/NetworkManager
│ ├─nfs-blkmap.service
│ │ └─1060 /usr/sbin/blkmapd
│ ├─nfs-idmapd.service
│ │ └─1062 /usr/sbin/rpc.idmapd
│ ├─nfs-mountd.service
│ │ └─1411 /usr/sbin/rpc.mountd
│ ├─nfsdcld.service
│ │ └─1063 /usr/sbin/nfsdcld
│ ├─ntpsec.service
│ │ └─2007 /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
│ ├─polkit.service
│ │ └─1083 /usr/lib/polkit-1/polkitd --no-debug
│ ├─rpc-statd.service
│ │ └─1412 /sbin/rpc.statd
│ ├─rpcbind.service
│ │ └─1053 /sbin/rpcbind -f -w
│ ├─rsyslog.service
│ │ └─1087 /usr/sbin/rsyslogd -n -iNONE
│ ├─smartmontools.service
│ │ └─1088 /usr/sbin/smartd -n
│ ├─system-getty.slice
│ │ └─getty@tty1.service
│ │ └─1448 /sbin/agetty -o "-p -- \\u" --noclear - linux
│ ├─systemd-journald.service
│ │ └─512 /lib/systemd/systemd-journald
│ ├─systemd-logind.service
│ │ └─1090 /lib/systemd/systemd-logind
│ ├─systemd-udevd.service
│ │ └─udev
│ │ └─531 /lib/systemd/systemd-udevd
│ ├─udisks2.service
│ │ └─1091 /usr/libexec/udisks2/udisksd
│ ├─unattended-upgrades.service
│ │ └─1410 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
│ └─wpa_supplicant.service
│ └─1117 /sbin/wpa_supplicant -u -s -O "DIR=/run/wpa_supplicant GROUP=netdev"
└─user.slice
└─user-1000.slice
├─session-1.scope
│ ├─1650 lightdm --session-child 13 16
│ ├─1679 fluxbox
│ ├─1716 /usr/bin/dbus-launch --exit-with-session --sh-syntax
│ ├─1717 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
│ ├─1770 /usr/bin/ssh-agent /usr/bin/startfluxbox
│ ├─1789 compton
│ ├─1796 tint2 -c /home/siamhie/.config/tint2/tint2rc
│ ├─1797 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
│ ├─1801 nm-applet
│ ├─1822 /usr/libexec/gvfsd
│ ├─1827 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
│ ├─1996 xfce4-clipman
│ ├─1997 /usr/libexec/at-spi-bus-launcher --launch-immediately
│ ├─2004 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=>
│ ├─2017 /usr/libexec/xdg-desktop-portal
│ ├─2022 /usr/libexec/xdg-document-portal
│ ├─2026 /usr/libexec/xdg-permission-store
│ ├─2032 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000/doc
│ ├─2038 /usr/libexec/xdg-desktop-portal-gtk
│ ├─2052 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
│ ├─2054 corectrl
│ ├─2063 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
│ ├─2065 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
│ ├─2302 /usr/libexec/at-spi2-registryd --use-gnome-session
│ ├─2363 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
│ ├─2477 /bin/bash /tmp/conky-manager2-siamhie/16854737871749932149.sh
│ ├─2478 conky -c /home/siamhie/.conky/R8/r8
│ ├─2535 /usr/libexec/gvfsd-metadata
│ ├─2558 xfce4-terminal
│ ├─2580 bash
│ ├─2641 systemctl status
│ └─2642 pager
└─user@1000.service
├─app.slice
│ └─gnome-keyring-daemon.service
│ └─2069 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-directory=/run/user/1000/keyring
├─init.scope
│ ├─1659 /lib/systemd/systemd --user
│ └─1660 "(sd-pam)"
└─session.slice
├─pipewire-pulse.service
│ └─1677 /usr/bin/pipewire-pulse
└─pipewire.service
└─1675 /usr/bin/pipewire
Re: MX-23 beta 1 feedback thread
Posted: Tue May 30, 2023 3:23 pm
by Jerry3904
I'm still fooling around from time to time with that autohide dock problem, which annoys me. I used dockmaker to match the background and border to the color of the sand on the bottom of the screen. There is still a blue line around the dock itself:
quickshot_230530_151630.png
@Melber is that from you? If yes, I wonder if that might be causing these sporadic problems.