Page 12 of 29
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 3:38 am
by Eadwine Rose
bin wrote: Tue Apr 11, 2023 2:01 am
Notifications are HUMONGOUS, at least 3 x the size of those in 21.3!!
We cater to those who need glasses.
Seriously though: I found them big as well.
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 8:19 am
by Buck Fankers
siamhie wrote: Mon Apr 10, 2023 7:27 pm
Without corectrl
fan1: 0 RPM (min = 0 RPM, max = 3600 RPM)
With corectrl
fan1: 966 RPM (min = 0 RPM, max = 3600 RPM)
Seems like without corectrl fan is not spinning?
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 8:25 am
by Eadwine Rose
More like without the value cannot be read.
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 11:35 am
by Racer24
So far for me after many attempts I still have not seen the alpha completely booting.. first few times I tried it got part way then errored out stating it could not find the kernel and left me with continue, reboot, and something else for options.. changed the usb I was using 3rd fresh download and.. looked like it was all doing things, then black screen with computer still running fine keyboard responding etc.. Im using an Nvidia 3060ti on a displayport connection here, have not tried running an hdmi cable yet.. but I will keep trying unless anyone has a better idea :)
can't gather a quick info for obvious reasons lol or it would be posted here (well, I wouldn't actually have to post :) )
I'm using MX usb creator
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 11:42 am
by Adrian
Racer24 wrote: Tue Apr 11, 2023 11:35 am
So far for me after many attempts I still have not seen the alpha completely booting.. first few times I tried it got part way then errored out stating it could not find the kernel and left me with continue, reboot, and something else for options.. changed the usb I was using 3rd fresh download and.. looked like it was all doing things, then black screen with computer still running fine keyboard responding etc.. Im using an Nvidia 3060ti on a displayport connection here, have not tried running an hdmi cable yet.. but I will keep trying unless anyone has a better idea :)
can't gather a quick info for obvious reasons lol or it would be posted here (well, I wouldn't actually have to post :) )
I'm using MX usb creator
QSI from MX-21.3 would help.
You might not need another download, try a different flashdrive (also try the one you created on a different computer if you have access to one to get an idea if there's a hardware incompatibility or a problem with the flashdrive).
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 12:25 pm
by siamhie
Buck Fankers wrote: Tue Apr 11, 2023 8:19 am
siamhie wrote: Mon Apr 10, 2023 7:27 pm
Without corectrl
fan1: 0 RPM (min = 0 RPM, max = 3600 RPM)
With corectrl
fan1: 966 RPM (min = 0 RPM, max = 3600 RPM)
Seems like without corectrl fan is not spinning?
On both my old RX 580 and new RX 6700 XT the fans don't spin until the GPU hits a certain temperature/load (can't remember what it was).
I don't care for their quiet mode so with corectrl, I have the fans running at 25% at idle and set up a manual curve.
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 12:31 pm
by Eadwine Rose
Ohhh interesting! Did not know you could do that :)
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 12:38 pm
by siamhie
Eadwine Rose wrote: Tue Apr 11, 2023 12:31 pm
Ohhh interesting! Did not know you could do that :)
It a great little tool. You can also control the fan curve for CPU's. I've got the BIOS handling my CPU which is why the tab is greyed up top.
ctrl.png
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 2:07 pm
by markol
I noticed two things running my custom conky:
/etc/initrd_release is now /etc/initrd-release
positioning of the conky icons is off (vertically cca -5% comparing to MX21)
Haven't had time to test it thoroughly, but looks pretty solid to me.
Re: MX-23 alpha2 feedback thread
Posted: Tue Apr 11, 2023 3:35 pm
by timkb4cq
asqwerth wrote: Sun Apr 09, 2023 7:08 am
Some of the stuff I usually install from MX's own repos, eg qmplay and ksnip, are not there yet, naturally.
I'll only put in a package request after mx23 is released.
Qmplay2 has been in the main repo since the middle of March.
I just added nomacs.