Code: Select all
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 6.1.0-29-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.123-1 (2025-01-02)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64 root=UUID=ca9de29a-3eeb-4592-9ee9-af09395befa1 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9f1ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9f20000-0x00000000da52bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da52c000-0x00000000da791fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da792000-0x00000000da79dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da79e000-0x00000000da7abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da7ac000-0x00000000da7b0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da7b1000-0x00000000da7f3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da7f4000-0x00000000dae12fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dae13000-0x00000000daff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff3000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./, BIOS 4.6.5 06/29/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2993.241 MHz processor
[ 0.001131] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001134] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001145] last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.001237] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001669] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.001675] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.011595] found SMP MP-table at [mem 0x000fcbb0-0x000fcbbf]
[ 0.012684] RAMDISK: [mem 0x2e241000-0x33117fff]
[ 0.012690] ACPI: Early table checksum verification disabled
[ 0.012692] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.012696] ACPI: XSDT 0x00000000DA792070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.012702] ACPI: FACP 0x00000000DA79C098 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.012707] ACPI: DSDT 0x00000000DA792168 009F2F (v02 ALASKA A M I 00000013 INTL 20051117)
[ 0.012710] ACPI: FACS 0x00000000DA7AAF80 000040
[ 0.012713] ACPI: APIC 0x00000000DA79C190 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.012716] ACPI: ASF! 0x00000000DA79C1F8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.012719] ACPI: MCFG 0x00000000DA79C2A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.012722] ACPI: HPET 0x00000000DA79C2E0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.012725] ACPI: SSDT 0x00000000DA79C318 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.012728] ACPI: SSDT 0x00000000DA79C688 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.012731] ACPI: BGRT 0x00000000DA79D120 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.012734] ACPI: Reserving FACP table memory at [mem 0xda79c098-0xda79c18b]
[ 0.012735] ACPI: Reserving DSDT table memory at [mem 0xda792168-0xda79c096]
[ 0.012736] ACPI: Reserving FACS table memory at [mem 0xda7aaf80-0xda7aafbf]
[ 0.012737] ACPI: Reserving APIC table memory at [mem 0xda79c190-0xda79c1f1]
[ 0.012738] ACPI: Reserving ASF! table memory at [mem 0xda79c1f8-0xda79c29c]
[ 0.012739] ACPI: Reserving MCFG table memory at [mem 0xda79c2a0-0xda79c2db]
[ 0.012739] ACPI: Reserving HPET table memory at [mem 0xda79c2e0-0xda79c317]
[ 0.012740] ACPI: Reserving SSDT table memory at [mem 0xda79c318-0xda79c684]
[ 0.012741] ACPI: Reserving SSDT table memory at [mem 0xda79c688-0xda79d119]
[ 0.012742] ACPI: Reserving BGRT table memory at [mem 0xda79d120-0xda79d157]
[ 0.012796] No NUMA configuration found
[ 0.012797] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.012807] NODE_DATA(0) allocated [mem 0x11f5d3000-0x11f5fdfff]
[ 0.013080] Zone ranges:
[ 0.013081] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013083] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013084] Normal [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.013086] Device empty
[ 0.013086] Movable zone start for each node
[ 0.013089] Early memory node ranges
[ 0.013089] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.013091] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.013092] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.013093] node 0: [mem 0x0000000040005000-0x00000000d9f1ffff]
[ 0.013094] node 0: [mem 0x00000000da7f4000-0x00000000dae12fff]
[ 0.013095] node 0: [mem 0x00000000daff3000-0x00000000daffffff]
[ 0.013095] node 0: [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.013097] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[ 0.013103] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013141] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.016401] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.024657] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.024717] On node 0, zone DMA32: 2260 pages in unavailable ranges
[ 0.024725] On node 0, zone DMA32: 480 pages in unavailable ranges
[ 0.025446] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.025488] On node 0, zone Normal: 2560 pages in unavailable ranges
[ 0.025495] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.025615] ACPI: PM-Timer IO Port: 0x408
[ 0.025622] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.025634] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.025637] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.025639] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.025643] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.025644] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.025649] TSC deadline timer available
[ 0.025650] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.025672] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.025675] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.025675] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.025676] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.025677] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.025679] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.025680] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.025682] PM: hibernation: Registered nosave memory: [mem 0xd9f20000-0xda52bfff]
[ 0.025683] PM: hibernation: Registered nosave memory: [mem 0xda52c000-0xda791fff]
[ 0.025683] PM: hibernation: Registered nosave memory: [mem 0xda792000-0xda79dfff]
[ 0.025684] PM: hibernation: Registered nosave memory: [mem 0xda79e000-0xda7abfff]
[ 0.025685] PM: hibernation: Registered nosave memory: [mem 0xda7ac000-0xda7b0fff]
[ 0.025686] PM: hibernation: Registered nosave memory: [mem 0xda7b1000-0xda7f3fff]
[ 0.025687] PM: hibernation: Registered nosave memory: [mem 0xdae13000-0xdaff2fff]
[ 0.025689] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.025690] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.025690] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.025691] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.025692] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.025692] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.025693] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.025694] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.025694] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.025695] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.025696] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.025697] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.025697] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.025698] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.025700] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.025701] Booting paravirtualized kernel on bare hardware
[ 0.025703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.030131] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.030428] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u1048576
[ 0.030435] pcpu-alloc: s212992 r8192 d28672 u1048576 alloc=1*2097152
[ 0.030438] pcpu-alloc: [0] 0 1
[ 0.030466] Fallback order for Node 0: 0
[ 0.030469] Built 1 zonelists, mobility grouping on. Total pages: 1006053
[ 0.030470] Policy zone: Normal
[ 0.030471] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64 root=UUID=ca9de29a-3eeb-4592-9ee9-af09395befa1 ro quiet
[ 0.030518] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64", will be passed to user space.
[ 0.030926] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.031132] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.031168] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.031172] software IO TLB: area num 2.
[ 0.068146] Memory: 3505288K/4088732K available (14342K kernel code, 2336K rwdata, 9084K rodata, 2796K init, 17392K bss, 273396K reserved, 0K cma-reserved)
[ 0.068441] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.068459] Kernel/User page tables isolation: enabled
[ 0.068502] ftrace: allocating 40302 entries in 158 pages
[ 0.075099] ftrace: allocated 158 pages with 5 groups
[ 0.075770] Dynamic Preempt: voluntary
[ 0.075805] rcu: Preemptible hierarchical RCU implementation.
[ 0.075806] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.075807] Trampoline variant of Tasks RCU enabled.
[ 0.075807] Rude variant of Tasks RCU enabled.
[ 0.075808] Tracing variant of Tasks RCU enabled.
[ 0.075809] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.075809] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.080817] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.081000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.082638] Console: colour VGA+ 80x25
[ 0.082655] printk: console [tty0] enabled
[ 0.082677] ACPI: Core revision 20220331
[ 0.082765] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.082781] APIC: Switch to symmetric I/O mode setup
[ 0.083182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.102780] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2554bca33, max_idle_ns: 440795302429 ns
[ 0.102786] Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.48 BogoMIPS (lpj=11972964)
[ 0.102803] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.102858] CPU0: Thermal monitoring enabled (TM1)
[ 0.102876] process: using mwait in idle threads
[ 0.102878] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.102879] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.102883] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.102884] Spectre V2 : Mitigation: Retpolines
[ 0.102885] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.102886] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.102887] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.102888] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.102890] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.102891] MDS: Mitigation: Clear CPU buffers
[ 0.102892] MMIO Stale Data: Unknown: No mitigations
[ 0.102896] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.102897] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.102899] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.116234] Freeing SMP alternatives memory: 36K
[ 0.116238] pid_max: default: 32768 minimum: 301
[ 0.116305] LSM: Security Framework initializing
[ 0.116324] landlock: Up and running.
[ 0.116325] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.116351] AppArmor: AppArmor initialized
[ 0.116353] TOMOYO Linux initialized
[ 0.116359] LSM support for eBPF active
[ 0.116401] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.116408] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.118867] smpboot: CPU0: Intel(R) Pentium(R) CPU G2030 @ 3.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.119004] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.119006] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.119027] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.119028] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.119045] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.119046] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.119061] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.119080] ... version: 3
[ 0.119081] ... bit width: 48
[ 0.119082] ... generic registers: 8
[ 0.119082] ... value mask: 0000ffffffffffff
[ 0.119083] ... max period: 00007fffffffffff
[ 0.119084] ... fixed-purpose events: 3
[ 0.119085] ... event mask: 00000007000000ff
[ 0.119234] signal: max sigframe size: 1520
[ 0.119251] Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.119273] rcu: Hierarchical SRCU implementation.
[ 0.119274] rcu: Max phase no-delay instances is 1000.
[ 0.119660] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.119707] smp: Bringing up secondary CPUs ...
[ 0.119810] x86: Booting SMP configuration:
[ 0.119812] .... node #0, CPUs: #1
[ 0.122842] smp: Brought up 1 node, 2 CPUs
[ 0.122842] smpboot: Max logical packages: 1
[ 0.122842] smpboot: Total of 2 processors activated (11972.96 BogoMIPS)
[ 0.123842] node 0 deferred pages initialised in 0ms
[ 0.123873] devtmpfs: initialized
[ 0.123873] x86/mm: Memory block size: 128MB
[ 0.123873] ACPI: PM: Registering ACPI NVS region [mem 0xda52c000-0xda791fff] (2514944 bytes)
[ 0.123873] ACPI: PM: Registering ACPI NVS region [mem 0xda79e000-0xda7abfff] (57344 bytes)
[ 0.123873] ACPI: PM: Registering ACPI NVS region [mem 0xda7b1000-0xda7f3fff] (274432 bytes)
[ 0.123873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.123873] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.123873] pinctrl core: initialized pinctrl subsystem
[ 0.123873] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.123873] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.123911] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.123970] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.123978] audit: initializing netlink subsys (disabled)
[ 0.124010] audit: type=2000 audit(1745778098.040:1): state=initialized audit_enabled=0 res=1
[ 0.124010] thermal_sys: Registered thermal governor 'fair_share'
[ 0.124010] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.124010] thermal_sys: Registered thermal governor 'step_wise'
[ 0.124010] thermal_sys: Registered thermal governor 'user_space'
[ 0.124010] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.124010] cpuidle: using governor ladder
[ 0.124010] cpuidle: using governor menu
[ 0.124010] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.124010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.124010] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.124010] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.124010] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.124010] PCI: Using configuration type 1 for base access
[ 0.124010] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.124010] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.127652] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.138785] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.138785] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.138967] ACPI: Added _OSI(Module Device)
[ 0.138967] ACPI: Added _OSI(Processor Device)
[ 0.138967] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.138967] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.139389] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.155746] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._PPC], AE_NOT_FOUND (20220331/psargs-332)
[ 0.155746] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[ 0.155746] ACPI: Dynamic OEM Table Load:
[ 0.155746] ACPI: SSDT 0xFFFF8A85C09AA400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.155746] ACPI: Interpreter enabled
[ 0.155746] ACPI: PM: (supports S0 S1 S4 S5)
[ 0.155746] ACPI: Using IOAPIC for interrupt routing
[ 0.155746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155746] PCI: Using E820 reservations for host bridge windows
[ 0.155806] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.158480] ACPI: PM: Power Resource [FN00]
[ 0.158538] ACPI: PM: Power Resource [FN01]
[ 0.158599] ACPI: PM: Power Resource [FN02]
[ 0.158656] ACPI: PM: Power Resource [FN03]
[ 0.158710] ACPI: PM: Power Resource [FN04]
[ 0.159089] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.159096] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.159189] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.159191] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.159193] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.159671] PCI host bridge to bus 0000:00
[ 0.159673] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.159675] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.159677] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.159679] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window]
[ 0.159680] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.159681] pci_bus 0000:00: root bus resource [mem 0x11f600000-0x51f5fffff window]
[ 0.159683] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.159698] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.159766] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.159774] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.159779] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.159782] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.159793] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.159891] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.159911] pci 0000:00:16.0: reg 0x10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
[ 0.159983] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.160049] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.160065] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
[ 0.160148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.160230] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.160248] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
[ 0.160324] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.160419] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.160508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.160597] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.160685] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.160798] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.160814] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
[ 0.160896] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.160977] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.161155] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.161168] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.161176] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.161183] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.161191] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.161198] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.161206] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
[ 0.161246] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.161316] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.161333] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
[ 0.161353] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.161469] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161550] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.161575] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.161608] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.161629] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.161757] pci 0000:02:00.0: supports D1 D2
[ 0.161759] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161951] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161956] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.161960] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.161966] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.162334] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.162373] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.162410] ACPI: PCI: Interrupt link LNKC configured for IRQ 5
[ 0.162446] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.162483] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.162484] ACPI: PCI: Interrupt link LNKE disabled
[ 0.162519] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.162520] ACPI: PCI: Interrupt link LNKF disabled
[ 0.162556] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ 0.162592] ACPI: PCI: Interrupt link LNKH configured for IRQ 3
[ 0.166787] iommu: Default domain type: Translated
[ 0.166788] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.166856] pps_core: LinuxPPS API ver. 1 registered
[ 0.166858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.166863] PTP clock support registered
[ 0.166871] EDAC MC: Ver: 3.0.0
[ 0.166968] NetLabel: Initializing
[ 0.166968] NetLabel: domain hash size = 128
[ 0.166968] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.166979] NetLabel: unlabeled traffic allowed by default
[ 0.166980] PCI: Using ACPI for IRQ routing
[ 0.168510] PCI: pci_cache_line_size set to 64 bytes
[ 0.168544] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.168546] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.168547] e820: reserve RAM buffer [mem 0xd9f20000-0xdbffffff]
[ 0.168548] e820: reserve RAM buffer [mem 0xdae13000-0xdbffffff]
[ 0.168549] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.168550] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.168567] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.168567] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.168567] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.168567] vgaarb: loaded
[ 0.168567] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.168567] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.171846] clocksource: Switched to clocksource tsc-early
[ 0.171997] VFS: Disk quotas dquot_6.6.0
[ 0.172016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.172153] AppArmor: AppArmor Filesystem Enabled
[ 0.172174] pnp: PnP ACPI init
[ 0.172265] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.172342] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.172345] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.172346] system 00:01: [io 0xffff] has been reserved
[ 0.172348] system 00:01: [io 0xffff] has been reserved
[ 0.172349] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.172351] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.172352] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.172354] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.172427] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.172493] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.172559] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.172735] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.172738] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.172739] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.172741] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.172743] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.172745] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.172747] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.172748] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.172750] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.172752] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.172754] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.172868] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 0.172871] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
[ 0.172889] pnp: PnP ACPI: found 8 devices
[ 0.177698] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.177728] NET: Registered PF_INET protocol family
[ 0.177728] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.179101] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.179141] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.179175] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.179332] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.179457] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.179533] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.179566] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.179582] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.179633] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.179641] NET: Registered PF_XDP protocol family
[ 0.179649] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.179653] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.179655] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.179665] clipped [mem size 0x00018000] to [mem size 0x00010000] for e820 entry [mem 0x000e0000-0x000fffff]
[ 0.179668] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 0.179673] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref]
[ 0.179676] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.179679] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.179683] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.179688] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
[ 0.179692] pci 0000:00:1c.0: bridge window [mem 0x11f600000-0x11f7fffff 64bit pref]
[ 0.179699] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.179701] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.179706] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.179710] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179717] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.179719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.179720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.179721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window]
[ 0.179722] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfeafffff window]
[ 0.179724] pci_bus 0000:00: resource 9 [mem 0x11f600000-0x51f5fffff window]
[ 0.179725] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.179727] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
[ 0.179728] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref]
[ 0.179730] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.179731] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.179732] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179827] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.202884] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 22499 usecs
[ 0.226874] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23407 usecs
[ 0.226892] PCI: CLS 64 bytes, default 64
[ 0.226905] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.226906] software IO TLB: mapped [mem 0x00000000d5f20000-0x00000000d9f20000] (64MB)
[ 0.226955] Trying to unpack rootfs image as initramfs...
[ 0.227321] Initialise system trusted keyrings
[ 0.227337] Key type blacklist registered
[ 0.227416] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.228863] zbud: loaded
[ 0.229222] integrity: Platform Keyring initialized
[ 0.229238] integrity: Machine keyring initialized
[ 0.229241] Key type asymmetric registered
[ 0.229242] Asymmetric key parser 'x509' registered
[ 0.771482] Freeing initrd memory: 80732K
[ 0.776522] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.776550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.776587] io scheduler mq-deadline registered
[ 0.777614] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.778032] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.778034] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.778200] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.778201] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.778302] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.778675] Linux agpgart interface v0.103
[ 0.778723] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.778886] i8042: PNP: No PS/2 controller found.
[ 0.778887] i8042: Probing ports directly.
[ 0.779755] i8042: No controller found
[ 0.779863] mousedev: PS/2 mouse device common for all mice
[ 0.779883] rtc_cmos 00:02: RTC can wake from S4
[ 0.780141] rtc_cmos 00:02: registered as rtc0
[ 0.780175] rtc_cmos 00:02: setting system clock to 2025-04-27T18:21:39 UTC (1745778099)
[ 0.780197] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.780274] intel_pstate: Intel P-state driver initializing
[ 0.780406] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.791788] NET: Registered PF_INET6 protocol family
[ 0.796797] Segment Routing with IPv6
[ 0.796815] In-situ OAM (IOAM) with IPv6
[ 0.796838] mip6: Mobile IPv6
[ 0.796843] NET: Registered PF_PACKET protocol family
[ 0.796894] mpls_gso: MPLS GSO support
[ 0.797061] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 0.797067] microcode: Microcode Update Driver: v2.2.
[ 0.797073] IPI shorthand broadcast: enabled
[ 0.797096] sched_clock: Marking stable (795231874, 1750779)->(802858445, -5875792)
[ 0.797244] registered taskstats version 1
[ 0.797252] Loading compiled-in X.509 certificates
[ 0.816660] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.816677] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 0.816945] zswap: loaded using pool lzo/zbud
[ 0.817206] Key type .fscrypt registered
[ 0.817209] Key type fscrypt-provisioning registered
[ 0.821638] Key type encrypted registered
[ 0.821644] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.821653] ima: No TPM chip found, activating TPM-bypass!
[ 0.821655] ima: Allocated hash algorithm: sha256
[ 0.821668] ima: No architecture policies found
[ 0.821681] evm: Initialising EVM extended attributes:
[ 0.821682] evm: security.selinux
[ 0.821683] evm: security.SMACK64 (disabled)
[ 0.821684] evm: security.SMACK64EXEC (disabled)
[ 0.821685] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.821685] evm: security.SMACK64MMAP (disabled)
[ 0.821686] evm: security.apparmor
[ 0.821686] evm: security.ima
[ 0.821687] evm: security.capability
[ 0.821688] evm: HMAC attrs: 0x1
[ 0.925195] clk: Disabling unused clocks
[ 0.926166] Freeing unused decrypted memory: 2036K
[ 0.926578] Freeing unused kernel image (initmem) memory: 2796K
[ 0.926607] Write protecting the kernel read-only data: 26624k
[ 0.927020] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.927211] Freeing unused kernel image (rodata/data gap) memory: 1156K
[ 0.974878] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.974880] x86/mm: Checking user space page tables
[ 1.020088] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.020093] Run /init as init process
[ 1.020094] with arguments:
[ 1.020095] /init
[ 1.020096] with environment:
[ 1.020097] HOME=/
[ 1.020098] TERM=linux
[ 1.020098] BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64
[ 1.176763] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.189796] ACPI: button: Power Button [PWRB]
[ 1.189865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.189898] ACPI: button: Power Button [PWRF]
[ 1.220199] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.220855] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20220331/utaddress-204)
[ 1.220862] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.220865] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.220868] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.220869] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.220871] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.220872] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20220331/utaddress-204)
[ 1.220875] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.220875] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.228915] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.229111] i2c i2c-0: 1/2 memory slots populated (from DMI)
[ 1.229425] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.237768] tsc: Refined TSC clocksource calibration: 2993.200 MHz
[ 1.237776] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b252da6e11, max_idle_ns: 440795218047 ns
[ 1.241366] clocksource: Switched to clocksource tsc
[ 1.259200] ACPI: bus type USB registered
[ 1.259227] usbcore: registered new interface driver usbfs
[ 1.259235] usbcore: registered new interface driver hub
[ 1.259246] usbcore: registered new device driver usb
[ 1.263237] SCSI subsystem initialized
[ 1.266636] r8169 0000:02:00.0 eth0: RTL8106e, 00:e0:4c:03:ae:f3, XID 449, IRQ 24
[ 1.268760] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.268767] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.268780] ehci-pci 0000:00:1a.0: debug port 2
[ 1.272706] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
[ 1.289280] ACPI: bus type drm_connector registered
[ 1.289768] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.289831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.289834] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.289836] usb usb1: Product: EHCI Host Controller
[ 1.289838] usb usb1: Manufacturer: Linux 6.1.0-29-amd64 ehci_hcd
[ 1.289839] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.289960] hub 1-0:1.0: USB hub found
[ 1.289967] hub 1-0:1.0: 2 ports detected
[ 1.290246] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.290251] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.290262] ehci-pci 0000:00:1d.0: debug port 2
[ 1.294187] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
[ 1.295303] libata version 3.00 loaded.
[ 1.300776] ahci 0000:00:1f.2: version 3.0
[ 1.300816] cryptd: max_cpu_qlen set to 1000
[ 1.309779] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.309832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.309835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309837] usb usb2: Product: EHCI Host Controller
[ 1.309839] usb usb2: Manufacturer: Linux 6.1.0-29-amd64 ehci_hcd
[ 1.309840] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.310016] hub 2-0:1.0: USB hub found
[ 1.310056] hub 2-0:1.0: 2 ports detected
[ 1.311285] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x20 impl SATA mode
[ 1.311290] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.315075] scsi host0: ahci
[ 1.321377] scsi host1: ahci
[ 1.324247] scsi host2: ahci
[ 1.333839] scsi host3: ahci
[ 1.349816] scsi host4: ahci
[ 1.351345] scsi host5: ahci
[ 1.351401] ata1: DUMMY
[ 1.351403] ata2: DUMMY
[ 1.351404] ata3: DUMMY
[ 1.351404] ata4: DUMMY
[ 1.351405] ata5: DUMMY
[ 1.351407] ata6: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06380 irq 25
[ 1.545767] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.581761] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.660748] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.661635] Console: switching to colour dummy device 80x25
[ 1.662952] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.672086] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.672964] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-332)
[ 1.672976] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[ 1.673074] ata6.00: ATA-10: Ant Esports 690 NEO SATA 128GB, F3A1E171, max UDMA/133
[ 1.673178] ata6.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.673590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-332)
[ 1.673602] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529)
[ 1.673770] ata6.00: configured for UDMA/133
[ 1.673896] scsi 5:0:0:0: Direct-Access ATA Ant Esports 690 E171 PQ: 0 ANSI: 5
[ 1.681249] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 1.681670] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.681832] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.702149] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.702155] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.702469] hub 1-1:1.0: USB hub found
[ 1.702685] hub 1-1:1.0: 4 ports detected
[ 1.738117] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.738122] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.738417] hub 2-1:1.0: USB hub found
[ 1.738492] hub 2-1:1.0: 6 ports detected
[ 1.799532] fbcon: i915drmfb (fb0) is primary device
[ 1.900975] Console: switching to colour frame buffer device 240x67
[ 1.919317] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 1.941302] sd 5:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.941314] sd 5:0:0:0: [sda] Write Protect is off
[ 1.941317] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.941329] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.941347] sd 5:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.942366] sda: sda1
[ 1.942450] sd 5:0:0:0: [sda] Attached SCSI disk
[ 1.989769] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 2.025758] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 2.073752] raid6: sse2x4 gen() 14248 MB/s
[ 2.098614] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 2.098619] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.098621] usb 1-1.2: Product: LSD315P
[ 2.098622] usb 1-1.2: Manufacturer: Realtek
[ 2.098623] usb 1-1.2: SerialNumber: 009569D083E4
[ 2.138363] usb 2-1.1: New USB device found, idVendor=c0f4, idProduct=01f5, bcdDevice= 1.10
[ 2.138367] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.138369] usb 2-1.1: Product: Usb KeyBoard
[ 2.138370] usb 2-1.1: Manufacturer: Usb KeyBoard
[ 2.141755] raid6: sse2x2 gen() 14858 MB/s
[ 2.144905] hid: raw HID events driver (C) Jiri Kosina
[ 2.152392] usbcore: registered new interface driver usbhid
[ 2.152394] usbhid: USB HID core driver
[ 2.154148] input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:C0F4:01F5.0001/input/input3
[ 2.209754] raid6: sse2x1 gen() 11924 MB/s
[ 2.209756] raid6: using algorithm sse2x2 gen() 14858 MB/s
[ 2.217767] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[ 2.277753] raid6: .... xor() 8494 MB/s, rmw enabled
[ 2.277755] raid6: using ssse3x2 recovery algorithm
[ 2.278500] xor: measuring software checksum speed
[ 2.278663] prefetch64-sse : 20256 MB/sec
[ 2.278844] generic_sse : 18290 MB/sec
[ 2.278845] xor: using function: prefetch64-sse (20256 MB/sec)
[ 2.279390] async_tx: api initialized (async)
[ 2.325995] hid-generic 0003:C0F4:01F5.0001: input,hidraw0: USB HID v1.10 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:1d.0-1.1/input0
[ 2.326183] input: Usb KeyBoard Usb KeyBoard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:C0F4:01F5.0002/input/input4
[ 2.331083] usb 2-1.2: New USB device found, idVendor=10c4, idProduct=8108, bcdDevice= 0.00
[ 2.331087] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.331089] usb 2-1.2: Product: USB OPTICAL MOUSE
[ 2.331090] usb 2-1.2: Manufacturer: YSPRINGTECH
[ 2.333896] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:10C4:8108.0003/input/input6
[ 2.385817] input: Usb KeyBoard Usb KeyBoard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:C0F4:01F5.0002/input/input5
[ 2.385963] hid-generic 0003:C0F4:01F5.0002: input,hidraw1: USB HID v1.10 Device [Usb KeyBoard Usb KeyBoard] on usb-0000:00:1d.0-1.1/input1
[ 2.385995] hid-generic 0003:10C4:8108.0003: input,hidraw2: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 2.498887] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[ 2.510817] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 2.612011] usb 2-1.5: New USB device found, idVendor=10d7, idProduct=b012, bcdDevice=88.91
[ 2.612018] usb 2-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.612019] usb 2-1.5: Product: CSR8510 A10
[ 2.637500] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 2.719180] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.190448] EDAC ie31200: No ECC support
[ 3.190471] EDAC ie31200: No ECC support
[ 3.318840] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 3.325927] at24 0-0050: supply vcc not found, using dummy regulator
[ 3.333307] at24 0-0050: 256 byte spd EEPROM, read-only
[ 3.353503] iTCO_vendor_support: vendor-support=0
[ 3.366337] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.367035] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 3.367038] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.367039] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.367040] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 3.389537] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 3.415229] intel_rapl_common: Found RAPL domain package
[ 3.415234] intel_rapl_common: Found RAPL domain core
[ 3.415235] intel_rapl_common: Found RAPL domain uncore
[ 3.415240] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 3.471248] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.502857] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 3.502862] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.502864] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 3.502866] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.502867] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.502869] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.502870] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.502872] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.527871] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.529556] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.529603] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.529649] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.529694] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.529734] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.901756] random: crng init done
[ 5.596729] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 5.620647] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.731509] Bluetooth: Core ver 2.22
[ 5.731533] NET: Registered PF_BLUETOOTH protocol family
[ 5.731534] Bluetooth: HCI device and connection manager initialized
[ 5.731538] Bluetooth: HCI socket layer initialized
[ 5.731540] Bluetooth: L2CAP socket layer initialized
[ 5.731543] Bluetooth: SCO socket layer initialized
[ 5.810154] usbcore: registered new interface driver btusb
[ 5.810477] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 5.810480] Bluetooth: hci0: HCI Read Transmit Power Level command is advertised, but not supported.
[ 5.810481] Bluetooth: hci0: HCI LE Set Random Private Address Timeout command is advertised, but not supported.
[ 5.834306] usbcore: registered new interface driver r8188eu
[ 5.962634] EXT4-fs (sda1): re-mounted. Quota mode: none.
[ 6.164902] lp: driver loaded but no devices found
[ 6.171093] ppdev: user-space parallel port driver
[ 6.183876] loop: module loaded
[ 6.263432] Adding 2097148k swap on /swap/swap. Priority:-2 extents:2 across:14827516k SSFS
[ 6.442297] networking done
[ 6.587281] RPC: Registered named UNIX socket transport module.
[ 6.587286] RPC: Registered udp transport module.
[ 6.587286] RPC: Registered tcp transport module.
[ 6.587287] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.603468] FS-Cache: Loaded
[ 6.842318] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 7.861780] Bluetooth: hci0: command 0x1004 tx timeout
[ 7.861781] Bluetooth: hci0: Opcode 0x1004 failed: -110
[ 8.220521] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.220739] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 8.220930] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 8.221119] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.221306] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 8.223835] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 8.223980] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 8.356823] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.356828] Bluetooth: BNEP filters: protocol multicast
[ 8.356832] Bluetooth: BNEP socket layer initialized
[ 8.586024] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[ 8.586393] RTL8208 Fast Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 8.658679] traps: plymouthd[211] trap stack segment ip:7f533e47b939 sp:7ffdaf963950 error:0 in libply.so.5.0.0 (deleted)[7f533e47a000+e000]
[ 8.866199] r8169 0000:02:00.0 eth0: Link is Down
[ 8.869062] r8188eu 1-1.2:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 8.869078] r8188eu 1-1.2:1.0: Firmware Version 11, SubVersion 1, Signature 0x88e1
[ 9.487935] NET: Registered PF_QIPCRTR protocol family
[ 10.907923] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.079649] fuse: init (API version 7.38)
[ 22.543878] usb 2-1.5: USB disconnect, device number 5
[ 23.532307] usb 2-1.5: new full-speed USB device number 6 using ehci-pci
[ 23.642367] usb 2-1.5: New USB device found, idVendor=10d7, idProduct=b012, bcdDevice=88.91
[ 23.642377] usb 2-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 23.642380] usb 2-1.5: Product: CSR8510 A10
[ 23.642867] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting command is advertised, but not supported.
[ 23.642870] Bluetooth: hci0: HCI Read Transmit Power Level command is advertised, but not supported.
[ 23.642871] Bluetooth: hci0: HCI LE Set Random Private Address Timeout command is advertised, but not supported.
[ 25.675911] Bluetooth: hci0: command 0x1004 tx timeout
[ 25.675916] Bluetooth: hci0: Opcode 0x1004 failed: -110
[ 26.623566] [UFW BLOCK] IN=wlan0 OUT= MAC=00:95:69:d0:83:e4:ea:06:0f:c2:06:84:08:00 SRC=192.168.139.87 DST=192.168.139.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10104 DF PROTO=TCP SPT=47042 DPT=1716 WINDOW=748 RES=0x00 ACK FIN URGP=0
[ 26.719661] [UFW BLOCK] IN=wlan0 OUT= MAC=00:95:69:d0:83:e4:ea:06:0f:c2:06:84:08:00 SRC=192.168.139.87 DST=192.168.139.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56204 DF PROTO=TCP SPT=47036 DPT=1716 WINDOW=319 RES=0x00 ACK FIN URGP=0
[ 30.142899] [UFW BLOCK] IN=wlan0 OUT= MAC=00:95:69:d0:83:e4:ea:06:0f:c2:06:84:08:00 SRC=192.168.139.87 DST=192.168.139.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10105 DF PROTO=TCP SPT=47042 DPT=1716 WINDOW=748 RES=0x00 ACK FIN URGP=0
[ 30.398896] [UFW BLOCK] IN=wlan0 OUT= MAC=00:95:69:d0:83:e4:ea:06:0f:c2:06:84:08:00 SRC=192.168.139.87 DST=192.168.139.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56205 DF PROTO=TCP SPT=47036 DPT=1716 WINDOW=319 RES=0x00 ACK FIN URGP=0