Report Bugs, Issues and non- package Requests
Eadwine Rose
Administrator
Posts: 14686 Joined: Wed Jul 12, 2006 2:10 am
#11
Post
by Eadwine Rose » Fri Jun 07, 2024 12:05 pm
siamhie wrote: Fri Jun 07, 2024 12:03 pm
Eadwine Rose wrote: Fri Jun 07, 2024 11:52 am
Silly question.. well not silly.. but that file.. can the date be edited so it reflects the right one, and will that then be loaded into the QSI?
Apparently you can.
Code: Select all
Snapshot created on: This-is-NOT-Eadwine's-snapshot
MX-23.6_x64 July 31 2023 * 6.1.0-37amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.247.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030
CharlesV
Global Moderator
Posts: 7395 Joined: Sun Jul 07, 2019 5:11 pm
#12
Post
by CharlesV » Fri Jun 07, 2024 12:08 pm
Eadwine Rose wrote: Fri Jun 07, 2024 12:04 pm
Ah cool. Does it show correctly now in the QSI window now that it has been edited to reflect the propers?
Yes it shows correctly.
AND... I just made a snapshot and now both are in sync again... either an update to snapshot fixed this ?
It is NOW showing the correct date... interesting.
*QSI = Quick System Info from menu (Copy for Forum)
*MXPI = MX Package Installer
* Please check the solved checkbox on the post that solved it.
* Linux -This is the way!
siamhie
Global Moderator
Posts: 3376 Joined: Fri Aug 20, 2021 5:45 pm
#13
Post
by siamhie » Fri Jun 07, 2024 12:09 pm
Eadwine Rose wrote: Fri Jun 07, 2024 12:04 pm
Ah cool. Does it show correctly now in the QSI window now that it has been edited to reflect the propers?
Yes it does (for me).
Code: Select all
╔═[siamhie@flux23]═[09:05/07-06-24]═════════════════════════════════════════[~]
╚═> cat /etc/snapshot_created
This-is-NOT-Eadwine's-snapshot
╔═[siamhie@flux23]═[09:05/07-06-24]═════════════════════════════════════════[~]
╚═> cat /etc/snapshot_created
20240607_0906
╔═[siamhie@flux23]═[09:08/07-06-24]═════════════════════════════════════════[~]
╚═>
This is my
Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Eadwine Rose
Administrator
Posts: 14686 Joined: Wed Jul 12, 2006 2:10 am
#14
Post
by Eadwine Rose » Fri Jun 07, 2024 12:10 pm
The editing shows the truth now. Here is the truth, the whole truth, and nothing but the truth
Code: Select all
Snapshot created on: 20240606_2135
System:
Kernel: 6.1.0-21-amd64 [6.1.90-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-21-amd64 root=UUID=<filter> ro quiet
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.3_x64 Libretto July 31 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: TUF B450-PLUS GAMING v: Rev X.0x serial: <superuser required>
UEFI: American Megatrends v: 1607 date: 06/17/2019
Battery:
Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ gen: 2 level: v3 note: check
built: 2018-21 process: GF 12nm family: 0x17 (23) model-id: 8 stepping: 2 microcode: 0x800820D
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 768 KiB
desc: d-8x32 KiB; i-8x64 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 2x8 MiB
Speed (MHz): avg: 1548 high: 1583 min/max: 1550/3200 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 1547 2: 1546 3: 1546 4: 1547 5: 1550 6: 1550
7: 1583 8: 1547 9: 1546 10: 1546 11: 1546 12: 1519 13: 1550 14: 1550 15: 1550 16: 1550
bogomips: 102209
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_rstack_overflow mitigation: safe RET
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: disabled; RSB filling;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb
vendor: Hauppauge works driver: cx23885 v: 0.0.4 pcie: gen: 1 speed: 2.5 GT/s lanes: 1
bus-ID: 07:00.0 chip-ID: 14f1:8880 class-ID: 0400
Device-2: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: ASUSTeK driver: nvidia v: 525.147.05
non-free: 530.xx+ status: current (as of 2023-03) arch: Pascal code: GP10x process: TSMC 16nm
built: 2016-21 pcie: gen: 2 speed: 5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s
bus-ID: 08:00.0 chip-ID: 10de:1c82 class-ID: 0300
Device-3: Logitech QuickCam E 3500 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-7:3
chip-ID: 046d:09a4 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
gpu: cx23885,nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x286mm (40.00x11.26")
s-diag: 1055mm (41.55")
Monitor-1: DVI-D-0 pos: right res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.78x10.55")
diag: 547mm (21.54") modes: N/A
Monitor-2: HDMI-0 pos: primary,left res: 1920x1080 hz: 60 dpi: 92
size: 531x299mm (20.91x11.77") diag: 609mm (23.99") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 525.147.05 renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb
vendor: Hauppauge works driver: cx23885 v: 0.0.4 bus-ID: 1-7:3 pcie: chip-ID: 046d:09a4 gen: 1
class-ID: 0102 serial: <filter> speed: 2.5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 14f1:8880
class-ID: 0400
Device-2: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 08:00.1 chip-ID: 10de:0fb9 class-ID: 0403
Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3
speed: 8 GT/s lanes: 16 bus-ID: 0a:00.3 chip-ID: 1022:1457 class-ID: 0403
Device-4: Logitech QuickCam E 3500 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-21-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK PRIME B450M-A
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 03:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u bus-ID: 1-1:2
chip-ID: 148f:7601 class-ID: 0000 serial: <filter>
IF: wlan0 state: down mac: <filter>
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
bus-ID: 1-8:4 chip-ID: 0a12:0001 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 22bb hci-v: 4.0 rev: 22bb
Info: acl-mtu: 310:10 sco-mtu: 64:8 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 1.36 TiB used: 254.51 GiB (18.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
temp: 31.0 C scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 870 EVO 500GB size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
temp: 31.0 C scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 3B6Q
temp: 31.0 C scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Samsung model: SSD 870 EVO 500GB size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
temp: 32.0 C scheme: GPT
Partition:
ID-1: / raw-size: 78.12 GiB size: 76.35 GiB (97.73%) used: 15.71 GiB (20.6%) fs: ext4
dev: /dev/sdd2 maj-min: 8:50
ID-2: /boot/efi raw-size: 523 MiB size: 521.9 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
dev: /dev/sdd1 maj-min: 8:49
ID-3: /home raw-size: 379.31 GiB size: 372.29 GiB (98.15%) used: 9.31 GiB (2.5%) fs: ext4
dev: /dev/sdd4 maj-min: 8:52
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdd3
maj-min: 8:51
Sensors:
System Temperatures: cpu: 44.9 C mobo: 30.0 C gpu: nvidia temp: 35 C
Fan Speeds (RPM): cpu: 675 fan-2: 734 fan-3: 0 fan-4: 707 fan-6: 0 gpu: nvidia fan: 25%
Power: 12v: N/A 5v: N/A 3.3v: 3.36 vbat: 3.27
Repos:
Packages: pm: dpkg pkgs: 2583 libs: 1362 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/megasync.list
1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_12/ ./
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://nl.mxrepo.com/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/slack.list
1: deb https://packagecloud.io/slacktechnologies/slack/debian/ jessie main
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http://repository.spotify.com/ stable non-free
Info:
Processes: 395 Uptime: 2h 1m wakeups: 4 Memory: 31.28 GiB used: 6.55 GiB (20.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
MX-23.6_x64 July 31 2023 * 6.1.0-37amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.247.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030
siamhie
Global Moderator
Posts: 3376 Joined: Fri Aug 20, 2021 5:45 pm
#15
Post
by siamhie » Fri Jun 07, 2024 12:14 pm
CharlesV wrote: Fri Jun 07, 2024 12:08 pm
Eadwine Rose wrote: Fri Jun 07, 2024 12:04 pm
Ah cool. Does it show correctly now in the QSI window now that it has been edited to reflect the propers?
Yes it shows correctly.
AND... I just made a snapshot and now both are in sync again... either an update to snapshot fixed this ?
It is NOW showing the correct date... interesting.
+1
MX Snapshot was updated on 06/06/24
Code: Select all
╔═[siamhie@flux23]═[09:12/07-06-24]═════════════════════════════════════════[~]
╚═> nala history
ID Command Date and Time Altered Requested-By
1 upgrade c… 2024-05-26 08:53:05 PDT 46 siamhie (1000)
2 upgrade l… 2024-05-29 07:53:26 PDT 2 siamhie (1000)
3 upgrade l… 2024-05-29 20:38:56 PDT 4 siamhie (1000)
4 upgrade l… 2024-05-31 15:52:47 PDT 1 siamhie (1000)
5 upgrade g… 2024-06-01 08:22:05 PDT 5 siamhie (1000)
6 upgrade l… 2024-06-02 07:19:00 PDT 3 siamhie (1000)
7 upgrade q… 2024-06-02 16:46:55 PDT 1 siamhie (1000)
8 upgrade l… 2024-06-04 07:11:22 PDT 2 siamhie (1000)
9 upgrade l… 2024-06-06 08:14:52 PDT 3 siamhie (1000)
10 upgrade m… 2024-06-06 17:02:53 PDT 1 siamhie (1000)
11 upgrade l… 2024-06-07 07:43:36 PDT 3 siamhie (1000)
╔═[siamhie@flux23]═[09:12/07-06-24]═════════════════════════════════════════[~]
╚═> nala history info 10
===============================================================================
Upgraded
===============================================================================
Package: Old Version: New Version: Size:
mx-snapshot 24.5 24.6 310 KB
===============================================================================
Summary
===============================================================================
Upgraded 1 Packages
This is my
Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
CharlesV
Global Moderator
Posts: 7395 Joined: Sun Jul 07, 2019 5:11 pm
#16
Post
by CharlesV » Fri Jun 07, 2024 12:15 pm
*QSI = Quick System Info from menu (Copy for Forum)
*MXPI = MX Package Installer
* Please check the solved checkbox on the post that solved it.
* Linux -This is the way!
siamhie
Global Moderator
Posts: 3376 Joined: Fri Aug 20, 2021 5:45 pm
#17
Post
by siamhie » Fri Jun 07, 2024 12:16 pm
Eadwine Rose wrote: Fri Jun 07, 2024 12:10 pm
The editing shows the truth now. Here is the truth, the whole truth, and nothing but the truth
Code: Select all
Snapshot created on: 20240606_2135
This is my
Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
CharlesV
Global Moderator
Posts: 7395 Joined: Sun Jul 07, 2019 5:11 pm
#18
Post
by CharlesV » Fri Jun 07, 2024 12:22 pm
siamhie wrote: Fri Jun 07, 2024 12:14 pm
MX Snapshot was updated on 06/06/24
Interestingly .. I am on 24.5 on all of my rigs.
( update notice just popped up for the 24.6 version.)
*QSI = Quick System Info from menu (Copy for Forum)
*MXPI = MX Package Installer
* Please check the solved checkbox on the post that solved it.
* Linux -This is the way!
Eadwine Rose
Administrator
Posts: 14686 Joined: Wed Jul 12, 2006 2:10 am
#19
Post
by Eadwine Rose » Fri Jun 07, 2024 12:24 pm
I just marked it solved, because I solved it using the edit of that file.
Of course it should update on its own, that old date showing up just looks silly. *chuckles*
MX-23.6_x64 July 31 2023 * 6.1.0-37amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.247.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030
siamhie
Global Moderator
Posts: 3376 Joined: Fri Aug 20, 2021 5:45 pm
#20
Post
by siamhie » Fri Jun 07, 2024 12:29 pm
CharlesV wrote: Fri Jun 07, 2024 12:22 pm
siamhie wrote: Fri Jun 07, 2024 12:14 pm
MX Snapshot was updated on 06/06/24
Interestingly .. I am on 24.5 on all of my rigs.
( update notice just popped up for the 24.6 version.)
@CharlesV I manually check for updates every morning with nala.
Just part of my morning routine when I turn on the computer.
This is my
Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.