MX Linux Forum

Posted: **Mon Jun 03, 2024 3:59 pm**

Hello,

There is a delay in the playback of the image in the videos, the sound is ahead of the image. And sometimes it repeats the playback for a few seconds and goes backwards ...

It does not happen on the other operating systems.

Thanks for your advice,

Code: Select all

Snapshot created on: 20240417_1112
System:
  Kernel: 6.8.12-1-liquorix-amd64 [6.8-18~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.8.12-1-liquorix-amd64 root=UUID=<filter> ro
    quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_ahs_x64 Libretto January 21  2024 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop System: Acer product: Aspire A315-58 v: V1.35 serial: <superuser required>
  Mobo: TGL model: Camellia_TL v: V1.35 serial: <superuser required> UEFI: Insyde v: 1.35
    date: 07/10/2023
Battery:
  ID-1: BAT1 charge: 53.2 Wh (100.0%) condition: 53.2/53.2 Wh (99.9%) volts: 12.9 min: 11.6
    model: COSMX AP20CBL type: Li-ion serial: <filter> status: full cycles: 1
CPU:
  Info: model: 11th Gen Intel Core i7-1165G7 bits: 64 type: MT MCP arch: Tiger Lake gen: core 11
    level: v4 note: check built: 2020 process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xB4
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 320 KiB
    desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 772 high: 1213 min/max: 400/2801 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 1018 2: 915 3: 1213 4: 967 5: 400 6: 400 7: 400 8: 868
    bogomips: 44851
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
    PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW loop
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: Acer Incorporated ALI driver: i915
    v: kernel alternate: xe arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: eDP-1
    empty: HDMI-A-1 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49 class-ID: 0300
  Device-2: Chicony HD User Facing type: USB driver: uvcvideo bus-ID: 1-8:3 chip-ID: 04f2:b72b
    class-ID: fe01 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x61ed built: 2018 res: 1920x1080 hz: 60 dpi: 142
    gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel Xe Graphics (TGL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: Acer Incorporated ALI
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel,snd_sof_pci_intel_tgl
    bus-ID: 0000:00:1f.3 chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.8.12-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel modules: wl bus-ID: 0000:00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI
    driver: r8169 v: kernel port: 3000 bus-ID: 0000:01:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 200f hci-v: 5.2 rev: 200f
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6 port: N/A
    bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 476.94 GiB used: 18.17 GiB (3.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8SEP4512Q-AA size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: SBI00111 temp: 28.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 33.4 GiB size: 32.58 GiB (97.54%) used: 18.16 GiB (55.8%) fs: ext4
    dev: /dev/nvme0n1p4 maj-min: 259:4
  ID-2: /boot/efi raw-size: 1.46 GiB size: 1.46 GiB (99.80%) used: 11.3 MiB (0.8%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 37.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2338 libs: 1291 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
  No active apt repos in: /etc/apt/sources.list.d/librewolf.list
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.ntua.gr/pub/linux/mxlinux/mx/repo/ bookworm main non-free
    2: deb http://ftp.ntua.gr/pub/linux/mxlinux/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/yandex-browser.list
    1: deb [arch=amd64] https://repo.yandex.ru/yandex-browser/deb/ stable main
Info:
  Processes: 331 Uptime: 52m wakeups: 697 Memory: 7.54 GiB used: 2.15 GiB (28.5%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  clang: 14.0.6 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Posted: **Mon Jun 03, 2024 4:05 pm**

What app are you using for playing the videos?

Posted: **Mon Jun 03, 2024 4:12 pm**

... with any of the browsers, no app.

Posted: **Mon Jun 03, 2024 7:07 pm**

keos wrote: ↑Mon Jun 03, 2024 4:12 pm ... with any of the browsers, no app.

Pick a web browser you use. I use LibreWolf and have no issues with playback of YT videos.
(I have recommended performance settings unchecked but do have hardware acceleration when available enabled)

Posted: **Mon Jun 03, 2024 9:37 pm**

I'd recommend that you check if the connection is good and stable. Any browser should get the job done. If there is no connectivity or speed issue.

Also, there is a flathub package called "FreeTube". It may help in some respect.

Posted: **Tue Jun 04, 2024 4:51 am**

In two different browsers the same thing happens but this is ´only´ with MX23; it cannot be a connection issue.

Posted: **Tue Jun 04, 2024 5:19 am**

Have you tried using an incognito window, and playing using that?

Posted: **Tue Jun 04, 2024 6:15 am**

It's the same ... I even switch to the previous kernel:

Code: Select all

ken@ken:~
$ uname -r
6.8.10-2-liquorix-amd64
ken@ken:~
$

remains the same problem ...

Posted: **Tue Jun 04, 2024 6:28 am**

https://forums.tomshardware.com/threads ... c.3035163/

You can try that one, the cookies bit and signing out and such.

Posted: **Tue Jun 04, 2024 6:38 am**

no google/youtube accounts, browsers (Midori-Firefox and Yandex-Chrome) set to not save cookies.

Posted: **Tue Jun 04, 2024 6:43 am**

Easy test: start the liveUSB, does it happen there? If so, then you know to look elsewhere than your system.

Posted: **Tue Jun 04, 2024 6:53 am**

Which ISP do you use?

Posted: **Tue Jun 04, 2024 7:07 am**

Easy test: start the liveUSB, does it happen there?

No, it is ok with the liveUSB

If so, then you know to look elsewhere than your system.

*look somewhere other than your system* - what does that mean, what should I do?

@j2mcgreg

Comcast/xfinity -- but again, it is happening only in MX23

Posted: **Tue Jun 04, 2024 7:18 am**

@keos wrote:

Comcast/xfinity -- but again, it is happening only in MX23

And only in your system.

Posted: **Tue Jun 04, 2024 7:18 am**

That means if it does the same thing on the live, there is something outside that influencing things.

As the live is fine, I'd say there is something wrong on the system itself. What is the last thing you did before it went wonky?

Posted: **Tue Jun 04, 2024 7:24 am**

Post the urls for a couple of the videos where this happens so we can see if they are the problem.

Posted: **Tue Jun 04, 2024 7:34 am**

What is the last thing you did before it went wonky?

Switch to the latest kernel -- but I go back to the previous kernel and now have the same problem.

https://www.youtube.com/watch?v=r_v3i2k6Psc

Posted: **Tue Jun 04, 2024 8:01 am**

The Kim Walker-Smith video played fine here. Have you tried using YouTube's own settings to make adjustments?

Posted: **Tue Jun 04, 2024 8:05 am**

Please remove the second screenshot. Nothing political here, as you know.

Kim's video played fine here on 4K.

Posted: **Tue Jun 04, 2024 9:02 am**

I got tired of the whole thing and reinstalled the system, it seemed to me that it was the fastest thing to do with ...

Now everything is perfectly fine, just like before, but... I have to upgrade! -- is there anything that I should take into account, before to update to avoid the same thing happening again?

Code: Select all

ken@ken:~
$ uname -a
Linux ken 6.8.9-5-liquorix-amd64 #1 ZEN SMP PREEMPT liquorix 6.8-14~mx23ahs (2024-05-17) x86_64 GNU/Linux
ken@ken:~
$

Posted: **Tue Jun 04, 2024 9:08 am**

Who says you HAVE to upgrade?

If it ain't broken...

Making a snapshot or something similar will help, of course :)

Posted: **Tue Jun 04, 2024 9:16 am**

I mean I should apply in the terminal:

Code: Select all

sudo aptitude update and upgrade

-- this copy I just reinstalled of MX23 is I think a month old.

EDIT:

Talking about the subject and it appears to me ... (sorry, spanish)

Code: Select all

actualización completa
  Leyendo lista de paquetes...
  Creando árbol de dependencias...
  Leyendo la información de estado...
  Calculando la actualización...
  Se instalarán los siguientes paquetes NUEVOS:
     linux-headers-6.8.12-1-liquorix-amd64 (6.8-18~mx23ahs)
     linux-image-6.8.12-1-liquorix-amd64 (6.8-18~mx23ahs)
  Los siguientes paquetes se han retenido:
     mx-docs (20240410 => 20240411)
  Se actualizarán los siguientes paquetes:
     gir1.2-gst-plugins-base-1.0 (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     gstreamer1.0-alsa (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     gstreamer1.0-plugins-base (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     libgstreamer-gl1.0-0 (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     libgstreamer-plugins-base1.0-0 (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     libgstreamer-plugins-base1.0-0:i386 (1.22.0-3+deb12u1 => 1.22.0-3+deb12u2)
     linux-headers-liquorix-amd64 (6.8-14~mx23ahs => 6.8-18~mx23ahs)
     linux-image-liquorix-amd64 (6.8-14~mx23ahs => 6.8-18~mx23ahs)
     localize-repo-mx (24.03.01 => 24.05.01)
     mx-packageinstaller-pkglist (24.05.06mx23 => 24.06.02mx23)
     mx-repo-list (24.5.01 => 24.5.02)
     mx-snapshot (24.4.02 => 24.5)
  12 actualizados, 2 nuevos se instalarán, 0 para eliminar y 1 no actualizados.
  Se necesita descargar 132 MB de archivos.
  Se utilizarán 228 MB de espacio de disco adicional después de esta operación.

Posted: **Tue Jun 04, 2024 9:24 am**

keos wrote: ↑Tue Jun 04, 2024 9:02 am I got tired of the whole thing and reinstalled the system, it seemed to me that it was the fastest thing to do with ...

Now everything is perfectly fine, just like before, but... I have to upgrade! -- is there anything that I should take into account, before to update to avoid the same thing happening again?
Code: Select all
ken@ken:~
$ uname -a
Linux ken 6.8.9-5-liquorix-amd64 #1 ZEN SMP PREEMPT liquorix 6.8-14~mx23ahs (2024-05-17) x86_64 GNU/Linux
ken@ken:~
$ 

Actually, I think that you should downgrade a bit. The Liquorix 6.8.9 series has proven to be problematic for some folks. I think that the 6.6.12-1 would be a better fit. If you go this route, remember to use Boot Options in MX Tools to make it the new default.

Posted: **Tue Jun 04, 2024 9:54 am**

After update/upgrade it is workin fine, i will take note of your advice.

but in case ... what do you means by:

If you go this route, remember to use Boot Options in MX Tools to make it the new default.

Thanks.

EDIT:

After reboot-shutdown-power-on, the system change the kernel to:

Code: Select all

ken@ken:~
$ uname -r
6.8.12-1-liquorix-amd64
ken@ken:~
$

but it still working fine; very weird the whole thing.

Posted: **Tue Jun 04, 2024 11:19 am**

keos wrote: ↑Tue Jun 04, 2024 9:54 am
After reboot-shutdown-power-on, the system change the kernel to:
Code: Select all
ken@ken:~
$ uname -r
6.8.12-1-liquorix-amd64
ken@ken:~
$ 
but it still working fine; very weird the whole thing.

Nothing weird. You updated the kernel in post #22.

Code: Select all

linux-headers-liquorix-amd64 (6.8-14~mx23ahs => 6.8-18~mx23ahs)
linux-image-liquorix-amd64 (6.8-14~mx23ahs => 6.8-18~mx23ahs)

Posted: **Tue Jun 04, 2024 11:31 am**

I did not explain myself well, I meant that it is strange that after the change of kernel for the current one, it still works correctly

-- I do not understand what happened, I reinstall the system and everything was solved, but what happened ...?

Posted: **Tue Jun 04, 2024 11:49 am**

My guess is that you stuffed something up between that last copy you made the install from and now.

Posted: **Tue Jun 04, 2024 12:04 pm**

Nothing. I don't install new things anymore, I don't make new configurations with the browsers, I now just do the updates that come with the system (?)

Posted: **Tue Jun 04, 2024 12:17 pm**

keos wrote: ↑Tue Jun 04, 2024 12:04 pm Nothing. I don't install new things anymore, I don't make new configurations with the browsers, I now just do the updates that come with the system (?)

In that case, you my have gotten a poorly transmitted or somehow corrupted update that messed up your system. Since you reside in the USA, as a precaution against this happening in future, you might use Repo Manager in MX Tools to switch your main repository to the one in Salt Lake City which is owned and operated by the MX team.

Posted: **Tue Jun 04, 2024 12:21 pm**

There is also the shear fact that not everything can always be saved perfectly. There are times when bits can get messed up because of cache, saving at the wrong time, and then 'just didnt save correctly'.

Any of these can cause big issues if they are in a config or a data file that is relied upon for your system to run properly.

This IS one of the best reasons I know of to have a method to recover your system. A good backup strategy will recover from most anything that causes a problems.

Posted: **Tue Jun 04, 2024 12:22 pm**

keos wrote: ↑Tue Jun 04, 2024 9:16 am I mean I should apply in the terminal:
Code: Select all
sudo aptitude update and upgrade
...

sudo aptitude update and upgrade ?

I guess you mean:

dist-upgrade or full-upgrade (both work with aptitude)

Posted: **Tue Jun 04, 2024 12:31 pm**

Anyway, I don't think I'll ever know what really happened, but in any case, I totally agree with you:

A good backup strategy will recover from most anything that causes a problems.

EDIT:

Reflecting on what happened, I now believe that also a reinstallation is a solution, sometimes even more effective, convenient and quicker than looking for endless possibilities ... -- With this in mind I consider the matter solved.

MX Linux Forum

Problems with videos/youtube

Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube [Solved]

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube

Re: Problems with videos/youtube