MX-23 RC2 (Xfce) feedback thread

[thinkpadx]

did not want to bug and PM someone about this dumb question. but if rc1 installed great and boots up on 2 laptops, and I DID upgrade both today; then i am good - yes? or NO? i should just not worry about it.i should be able to upgrade to final release when it happens...

sorry to waste a developers time on this. Have a good one!

[dolphin_oracle]

Ok installer custom partitioning might fail if the user is using read-only media. Not sure why.

Workaround if you have to use readonky media is to boot with the toram boot parameter.

This will be addresssed in an installer update.

[twister]

When trying to re-use the existing home folder (either mx21's or mx23's one) I'm getting the following at the end of the installation process:

"Failed to set user account passwords."

The Live log says:

cp -n /mnt/antiX/etc/skel/.bash_profile /mnt/antiX/home/johan
FAILED Phase 4 - Failed to set user account passwords


When I selected "to rename the existing home folder" the installation got completed with no issues.

I tried to re-use home folder for two users and got the same message.

[muskt]

I have just downloaded and unsuccessfully attempted a couple of installs of the RC2. I received exactly the same results as when attempting RC1 (with the exception of losing both my Windows 11 and MX 21.3 installs--The VFAT formatting thing, I think).
In short, the error I receive is "Failed to update initramfs".
Below it the initial post that I made yesterday in the MX Help section.
Hopefully there is enough info below to allow someone to give me a nudge in the correct direction.
Thanks,
Jerry


QUOTE=========
I intentionally did not post this under the MX 23 problem section because I do not believe that the problem I am experiencing is actually related to the RC1.
This could be a bit long, so here goes.
I currently have Windows 11 and MX21.3 on my system and until yesterday MX23 b2 running with no issues.
Nothing on my system has changed recently.
I successfully installed all of the Alpha & Beta MX23 releases with no problems.
I successfully downloaded, checked the md5 and created a USB drive (which I had used for the Beta versions of MX23) with no issues.
I booted the USB drive and started the install process.
When I got to the screen that allows selecting the partition to install into, I selected the partition that contained the MX23 b2.
I did not change any other settings.
After entering all the required items, the installer stopped with "Failed to update initramfs".
Game Over!
I attempted a reboot and was greeted with "no operating systems found"--or something very close to that.
After a couple of hours of puttering around, I was able to restore the Windows BCD, and also get MX21.3 to run.
I attempted the RC1 install again with the same results.
I suspect that I did something wrong or stupid in the partition selecting section of the installer--But I do not know what.
I re-downloaded the RC1 and did all the steps (same USB drive) as before with exactly the same results.

OK, I am almost 75 years old, & my memory is not quite as sharp as it used to be.
I have searched the User Manual, and the web, and have not had any luck finding a solution to my problem.
I realize that the Devs are quite busy, and hope that one or more of the experienced users can put my feet on the correct path so that I can use the RC1.
I should probably have taken a screenshot of the partition selection screen and would have if I knew how and had remembered to do so.

Thank you all for all of the past assistance.
Jerry
UNQUOTE======

[thinkpadx]

Ok installer custom partitioning might fail if the user is using read-only media. Not sure why.

Workaround if you have to use readonky media is to boot with the toram boot parameter.

This will be addresssed in an installer update.

for what it is worth - i never got usb installs to work with another distro so i only do dvd-rw burns and installs. (used to do cd ones when it was a smaller iso.)

not sure if your comments was meant towards me or me and everyone else - or just putting it out there so sorry if i am not the sharpest tool in the shed today.

:-)))

[dolphin_oracle]

I have just downloaded and unsuccessfully attempted a couple of installs of the RC2. I received exactly the same results as when attempting RC1 (with the exception of losing both my Windows 11 and MX 21.3 installs--The VFAT formatting thing, I think).
In short, the error I receive is "Failed to update initramfs".
Below it the initial post that I made yesterday in the MX Help section.
Hopefully there is enough info below to allow someone to give me a nudge in the correct direction.
Thanks,
Jerry


QUOTE=========
I intentionally did not post this under the MX 23 problem section because I do not believe that the problem I am experiencing is actually related to the RC1.
This could be a bit long, so here goes.
I currently have Windows 11 and MX21.3 on my system and until yesterday MX23 b2 running with no issues.
Nothing on my system has changed recently.
I successfully installed all of the Alpha & Beta MX23 releases with no problems.
I successfully downloaded, checked the md5 and created a USB drive (which I had used for the Beta versions of MX23) with no issues.
I booted the USB drive and started the install process.
When I got to the screen that allows selecting the partition to install into, I selected the partition that contained the MX23 b2.
I did not change any other settings.
After entering all the required items, the installer stopped with "Failed to update initramfs".
Game Over!
I attempted a reboot and was greeted with "no operating systems found"--or something very close to that.
After a couple of hours of puttering around, I was able to restore the Windows BCD, and also get MX21.3 to run.
I attempted the RC1 install again with the same results.
I suspect that I did something wrong or stupid in the partition selecting section of the installer--But I do not know what.
I re-downloaded the RC1 and did all the steps (same USB drive) as before with exactly the same results.

OK, I am almost 75 years old, & my memory is not quite as sharp as it used to be.
I have searched the User Manual, and the web, and have not had any luck finding a solution to my problem.
I realize that the Devs are quite busy, and hope that one or more of the experienced users can put my feet on the correct path so that I can use the RC1.
I should probably have taken a screenshot of the partition selection screen and would have if I knew how and had remembered to do so.

Thank you all for all of the past assistance.
Jerry
UNQUOTE======

it would be good to see the /var/log/minstall.log file.

[Freja]

On my local country(Japan) friend’s case,
He says “Disk format error occurred.
I Tried 4times, but uncompleted
disk format process (on RC2).”

I recieved his QSI.
I paste it below.

He installed beta2 in the past,
but beta2 has no this error.

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.37-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=ja_JP kbd=jp,us tz=Asia/Tokyo
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC2_x64 Libretto July 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop Mobo: N/A model: N/A serial: <superuser required> UEFI: LENOVO v: GDETC1WW (1.81 )
    date: 06/27/2019
Battery:
  ID-1: BAT0 charge: 8.2 Wh (98.8%) condition: 8.3/42.5 Wh (19.4%) volts: 16.3 min: 14.8
    model: SANYO 45N1093 type: Li-poly serial: <filter> status: not charging
CPU:
  Info: model: Intel Core i5-3337U bits: 64 type: MT MCP arch: Ivy Bridge gen: core 3 level: v2
    built: 2012-15 process: Intel 22nm family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 828 high: 900 min/max: 800/2700 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 900 2: 800 3: 814 4: 800 bogomips: 14366
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo driver: i915 v: kernel arch: Gen-7
    process: Intel 22nm built: 2012-13 ports: active: LVDS-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2,
    VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
  Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 2-1.6:4
    chip-ID: 04f2:b315 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
  Monitor-1: LVDS-1 model: LG Display 0x037a built: 2012 res: 1366x768 hz: 60 dpi: 125 gamma: 1.2
    size: 277x156mm (10.91x6.14") diag: 318mm (12.5") ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.2 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4000 (IVB GT2)
    direct-render: Yes
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo 7 driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Broadcom BCM43228 802.11a/b/g/n driver: wl v: kernel modules: bcma pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:4359 class-ID: 0280
  IF: wlan0 state: dormant mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 04:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Broadcom BCM20702A0 type: USB driver: btusb v: 0.8 bus-ID: 1-1.3:4 chip-ID: 0a5c:21f3
    class-ID: fe01 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: 220e hci-v: 4.0 rev: 1000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 59.17 GiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 model: ADROITLARK SSD 48GB size: 44.71 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4A0 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: A-Data model: USB Flash Drive size: 14.45 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 3.64 GiB used: 1024 KiB (0.0%) priority: 32767 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 52.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2065 libs: 1047 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://ftp.yz.yamagata-u.ac.jp/pub/Linux/MX-Linux-Packages/mx/repo/ bookworm main non-free
Info:
  Processes: 215 Uptime: 1m wakeups: 4 Memory: 3.64 GiB used: 1.09 GiB (29.9%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[muskt]

This is the follow on to post #16.
To prevent asking, I do not install Grub on a new Linux install. I leave it on the 21.3 install, and update it there--it has worked for me in this manner for the last 2-3 version installs.
I do not know if my method is correct.
Anyway, Here is the requested log.

Code: Select all

2023-07-15 14:23:11.847 DBG default: Installer version: 23.7.06mx23
2023-07-15 14:23:11.897 DBG default: << void MInstall::startup() >>
2023-07-15 14:23:11.897 DBG default: Detect EFI: 64
2023-07-15 14:23:11.897 DBG default: Exec #1: uname -m
2023-07-15 14:23:11.900 DBG default: Exit #1: 0
2023-07-15 14:23:11.900 DBG default: Detect arch: "x86_64"
2023-07-15 14:23:11.900 DBG default: Live boot: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
2023-07-15 14:24:22.225 DBG default: Exec #2: du -scb /live/aufs/boot
2023-07-15 14:24:22.229 DBG default: Exit #2: 0
2023-07-15 14:24:22.230 DBG default: Basic image: 6217068032 true "/live/boot-dev/antiX/linuxfs.info"
2023-07-15 14:24:22.230 DBG default: Source inodes: 295114 Assumed block size: 4096
2023-07-15 14:24:22.230 DBG default: Minimum space: 92951874 (boot), 7425854976 (root)
2023-07-15 14:24:22.253 DBG default: Exec #3: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2023-07-15 14:24:22.258 DBG default: Exit #3: 0
2023-07-15 14:24:22.259 DBG default: Bash #4: guess-hwclock
2023-07-15 14:24:24.270 DBG default: Exit #4: 0
2023-07-15 14:24:24.270 DBG default: Bash #5: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2023-07-15 14:24:24.274 DBG default: Exit #5: 0
2023-07-15 14:24:24.274 DBG default: Bash #6: ls -1 /home | grep -Ev '^(lost\+found|demo|snapshot)$' | grep -q '[a-zA-Z0-9]'
2023-07-15 14:24:24.277 DBG default: Exit #6: 1
2023-07-15 14:24:24.277 DBG default: check for possible snapshot: false
2023-07-15 14:24:24.277 DBG default: Bash #7: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2023-07-15 14:24:24.292 DBG default: Exit #7: 0
2023-07-15 14:24:24.294 DBG default: Exec #8: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2023-07-15 14:24:24.299 DBG default: Exit #8: 0
2023-07-15 14:24:24.299 DBG default: Exec #9: partprobe -s
2023-07-15 14:24:24.775 DBG default: SOut #9: "/dev/sdb: gpt partitions 1\n/dev/nvme0n1: gpt partitions 1 2 3 5 6 4\n"
2023-07-15 14:24:24.775 DBG default: Exit #9: 0
2023-07-15 14:24:24.775 DBG default: Exec #10: blkid -c /dev/null
2023-07-15 14:24:24.978 DBG default: SOut #10: "/dev/nvme0n1p5: LABEL=\"MX21\" UUID=\"db427c68-eb9b-4c4e-8e64-50795219eec0\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PTTYPE=\"dos\" PARTLABEL=\"MX21\" PARTUUID=\"abf93949-4ae4-443e-9493-0c9c307fdb7a\"\n/dev/nvme0n1p3: BLOCK_SIZE=\"512\" UUID=\"B0308D39308D0814\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"39e8c43e-9bbf-42be-95fc-0b34635f11c1\"\n/dev/nvme0n1p1: UUID=\"9CE6-130B\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"d76a8ad1-9d39-4ef5-a9f5-7a89e0a7e506\"\n/dev/nvme0n1p6: LABEL=\"rootMX23\" UUID=\"80680f8e-ae75-47d0-935c-e9965fcc584c\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"699cdeea-d4bf-4939-8d84-7d8ef615b2fc\"\n/dev/nvme0n1p4: BLOCK_SIZE=\"512\" UUID=\"5C0CB86D0CB84434\" TYPE=\"ntfs\" PARTUUID=\"c03223eb-1d67-4d20-b5d1-f132528428d1\"\n/dev/nvme0n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"dfa59eba-4fa3-41ba-b09d-b59360425f51\"\n/dev/sdb1: LABEL=\"MX23-RC2\" UUID=\"8A6F-F01D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"Main Data Partition\" PARTUUID=\"026067fa-c799-4276-be36-b8806167f6ea\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2023-07-15 14:24:24.978 DBG default: Exit #10: 0
2023-07-15 14:24:24.978 DBG default: Exec #11: parted -lm
2023-07-15 14:24:25.432 DBG default: Exit #11: 0
2023-07-15 14:24:25.432 DBG default: Exec #12: grub-probe -d /dev/sda2
2023-07-15 14:24:25.437 DBG default: SErr #12: "/usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/sda2.  Check your device.map.\n"
2023-07-15 14:24:25.437 DBG default: Exit #12: 1
2023-07-15 14:24:25.437 DBG default: Detect Mac: false
2023-07-15 14:24:25.437 DBG default: Bash #13: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2023-07-15 14:24:25.441 DBG default: SErr #13: "lsblk: /dev/mapper/control: not a block device\n"
2023-07-15 14:24:25.441 DBG default: Exit #13: 32
2023-07-15 14:27:39.756 DBG default: << bool Base::saveHomeBasic() >>
2023-07-15 14:27:39.808 DBG default: ++ Preparing to install MX Linux ++
2023-07-15 14:27:39.809 DBG default: Bash #14: echo 0 > /sys/module/zswap/parameters/enabled
2023-07-15 14:27:39.812 DBG default: Exit #14: 0
2023-07-15 14:27:39.812 DBG default: Exec #15: modprobe zram
2023-07-15 14:27:39.819 DBG default: Exit #15: 0
2023-07-15 14:27:39.819 DBG default: Exec #16: zramctl zram0 -a zstd -s 16671051776
2023-07-15 14:27:39.841 DBG default: Exit #16: 0
2023-07-15 14:27:39.841 DBG default: Exec #17: mkswap -q /dev/zram0
2023-07-15 14:27:39.846 DBG default: Exit #17: 0
2023-07-15 14:27:39.846 DBG default: Exec #18: swapon -p 32767 /dev/zram0
2023-07-15 14:27:39.851 DBG default: Exit #18: 0
2023-07-15 14:27:39.858 DBG default: Exec #19: smartctl -H /dev/sda
2023-07-15 14:27:39.870 DBG default: SOut #19: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sda: Unknown USB bridge [0x058f:0x6362 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2023-07-15 14:27:39.870 DBG default: Exit #19: 1
2023-07-15 14:27:39.870 DBG default: Bash #20: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:39.884 DBG default: Exit #20: 0
2023-07-15 14:27:39.884 DBG default: Exec #21: smartctl -H /dev/sdb
2023-07-15 14:27:39.897 DBG default: SOut #21: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sdb: Unknown USB bridge [0x090c:0x1000 (0x1100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2023-07-15 14:27:39.897 DBG default: Exit #21: 1
2023-07-15 14:27:39.897 DBG default: Bash #22: smartctl -A /dev/sdb| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:39.910 DBG default: Exit #22: 0
2023-07-15 14:27:39.910 DBG default: Exec #23: smartctl -H /dev/sdc
2023-07-15 14:27:39.925 DBG default: SOut #23: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sdc: Unknown USB bridge [0x058f:0x6362 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2023-07-15 14:27:39.925 DBG default: Exit #23: 1
2023-07-15 14:27:39.925 DBG default: Bash #24: smartctl -A /dev/sdc| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:39.935 DBG default: Exit #24: 0
2023-07-15 14:27:39.935 DBG default: Exec #25: smartctl -H /dev/sdd
2023-07-15 14:27:39.949 DBG default: SOut #25: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sdd: Unknown USB bridge [0x058f:0x6362 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2023-07-15 14:27:39.949 DBG default: Exit #25: 1
2023-07-15 14:27:39.949 DBG default: Bash #26: smartctl -A /dev/sdd| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:39.965 DBG default: Exit #26: 0
2023-07-15 14:27:39.965 DBG default: Exec #27: smartctl -H /dev/sde
2023-07-15 14:27:39.974 DBG default: SOut #27: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sde: Unknown USB bridge [0x058f:0x6362 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2023-07-15 14:27:39.974 DBG default: Exit #27: 1
2023-07-15 14:27:39.974 DBG default: Bash #28: smartctl -A /dev/sde| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:39.989 DBG default: Exit #28: 0
2023-07-15 14:27:39.990 DBG default: Exec #29: smartctl -H /dev/nvme0n1
2023-07-15 14:27:40.017 DBG default: SOut #29: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2023-07-15 14:27:40.017 DBG default: Exit #29: 0
2023-07-15 14:27:40.017 DBG default: Bash #30: smartctl -A /dev/nvme0n1| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-15 14:27:40.047 DBG default: Exit #30: 0
2023-07-15 14:27:40.047 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-15 14:27:40.047 DBG default: Bash #31: ps -e | grep 'udisksd'
2023-07-15 14:27:40.065 DBG default: SOut #31: "   5280 ?        00:00:00 udisksd\n"
2023-07-15 14:27:40.065 DBG default: Exit #31: 0
2023-07-15 14:27:40.065 DBG default: Bash #32: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-15 14:27:40.070 DBG default: Exit #32: 0
2023-07-15 14:27:40.070 DBG default: Bash #33: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | grep -Ev '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2023-07-15 14:27:40.076 DBG default: Exit #33: 1
2023-07-15 14:27:40.077 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2023-07-15 14:27:40.077 DBG default: Exec #34: touch /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-15 14:27:40.080 DBG default: Exit #34: 0
2023-07-15 14:27:40.080 DBG default: Bash #35: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-15 14:27:40.084 DBG default: Exit #35: 0
2023-07-15 14:27:40.084 DBG default: Exec #36: udevadm control --reload
2023-07-15 14:27:40.098 DBG default: Exit #36: 0
2023-07-15 14:27:40.098 DBG default: Exec #37: udevadm trigger --subsystem-match=block
2023-07-15 14:27:40.106 DBG default: Exit #37: 0
2023-07-15 14:27:40.106 DBG default: Mount points:
2023-07-15 14:27:40.106 DBG default:  - "/" - "nvme0n1p6" "" "/dev/nvme0n1p6"
2023-07-15 14:27:40.106 DBG default: << void PartMan::preparePartitions() >>
2023-07-15 14:27:40.106 DBG default: Exec #38: swapon --show=NAME --noheadings
2023-07-15 14:27:40.110 DBG default: Exit #38: 0
2023-07-15 14:27:40.110 DBG default: Exec #39: findmnt --raw -o SOURCE
2023-07-15 14:27:40.114 DBG default: Exit #39: 0
2023-07-15 14:27:40.114 DBG default: ++ Preparing required partitions ++
2023-07-15 14:27:40.116 DBG default: Bash #40: sgdisk /dev/nvme0n1 -q --typecode=1:ef00
2023-07-15 14:27:40.121 DBG default: Exit #40: 0
2023-07-15 14:27:40.124 DBG default: Bash #41: sgdisk /dev/nvme0n1 -q --typecode=6:8303
2023-07-15 14:27:40.129 DBG default: Exit #41: 0
2023-07-15 14:27:40.136 DBG default: Exec #42: partprobe -s
2023-07-15 14:27:40.919 DBG default: SOut #42: "/dev/sdb: gpt partitions 1\n/dev/nvme0n1: gpt partitions 1 2 3 5 6 4\n/dev/zram0: loop partitions 1\n"
2023-07-15 14:27:40.919 DBG default: Exit #42: 0
2023-07-15 14:27:40.919 DBG default: << void PartMan::formatPartitions() >>
2023-07-15 14:27:40.919 DBG default: ++ Formatting: / ++
2023-07-15 14:27:40.920 DBG default: Exec #43: mkfs.ext4 -F /dev/nvme0n1p6 -L rootMX23
2023-07-15 14:27:41.035 DBG default: SOut #43: "Discarding device blocks:       0/5354752\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b               \b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 5354752 4k blocks and 1340864 inodes\nFilesystem UUID: 8e149fb6-6788-4b1f-b9d8-0da5c4cfaf32\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000\n\nAllocating group tables:   0/164\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/164\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (32768 blocks): done\nWriting superblocks and filesystem accounting information:   0/164\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2023-07-15 14:27:41.035 DBG default: SErr #43: "mke2fs 1.47.0 (5-Feb-2023)\n"
2023-07-15 14:27:41.035 DBG default: Exit #43: 0
2023-07-15 14:27:41.035 DBG default: Exec #44: tune2fs -c0 -C0 -i1m /dev/nvme0n1p6
2023-07-15 14:27:41.045 DBG default: SOut #44: "tune2fs 1.47.0 (5-Feb-2023)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2023-07-15 14:27:41.045 DBG default: Exit #44: 0
2023-07-15 14:27:41.045 DBG default: << void PartMan::mountPartitions() >>
2023-07-15 14:27:41.045 DBG default: ++ Mounting: / ++
2023-07-15 14:27:41.047 DBG default: Exec #45: mount --mkdir -o discard,noatime,async,noiversion /dev/nvme0n1p6 /mnt/antiX/
2023-07-15 14:27:41.090 DBG default: Exit #45: 0
2023-07-15 14:27:41.090 DBG default: Exec #46: blkid -c /dev/null
2023-07-15 14:27:41.311 DBG default: SOut #46: "/dev/nvme0n1p5: LABEL=\"MX21\" UUID=\"db427c68-eb9b-4c4e-8e64-50795219eec0\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PTTYPE=\"dos\" PARTLABEL=\"MX21\" PARTUUID=\"abf93949-4ae4-443e-9493-0c9c307fdb7a\"\n/dev/nvme0n1p3: BLOCK_SIZE=\"512\" UUID=\"B0308D39308D0814\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"39e8c43e-9bbf-42be-95fc-0b34635f11c1\"\n/dev/nvme0n1p1: UUID=\"9CE6-130B\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"d76a8ad1-9d39-4ef5-a9f5-7a89e0a7e506\"\n/dev/nvme0n1p6: LABEL=\"rootMX23\" UUID=\"8e149fb6-6788-4b1f-b9d8-0da5c4cfaf32\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"699cdeea-d4bf-4939-8d84-7d8ef615b2fc\"\n/dev/nvme0n1p4: BLOCK_SIZE=\"512\" UUID=\"5C0CB86D0CB84434\" TYPE=\"ntfs\" PARTUUID=\"c03223eb-1d67-4d20-b5d1-f132528428d1\"\n/dev/nvme0n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"dfa59eba-4fa3-41ba-b09d-b59360425f51\"\n/dev/sdb1: LABEL=\"MX23-RC2\" UUID=\"8A6F-F01D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"Main Data Partition\" PARTUUID=\"026067fa-c799-4276-be36-b8806167f6ea\"\n/dev/loop0: TYPE=\"squashfs\"\n/dev/zram0: UUID=\"0eb28728-3212-4729-86ef-f325d3474522\" TYPE=\"swap\"\n"
2023-07-15 14:27:41.311 DBG default: Exit #46: 0
2023-07-15 14:27:41.311 DBG default: Exec #47: lsblk --list -bJo PATH,UUID
2023-07-15 14:27:41.320 DBG default: Exit #47: 0
2023-07-15 14:27:41.320 DBG default: << void Base::install() >>
2023-07-15 14:27:41.320 DBG default: << void Base::copyLinux(bool) >>
2023-07-15 14:27:41.323 DBG default: ++ Copying new system ++
2023-07-15 14:27:41.324 DBG default: Exec COPY: cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2023-07-15 14:28:17.771 DBG default: Exit COPY: 0 QProcess::NormalExit
2023-07-15 14:28:17.771 DBG default: ++ Creating system directories ++
2023-07-15 14:28:17.774 DBG default: MkPath(SUCCESS): "/mnt/antiX/tmp"
2023-07-15 14:28:17.774 DBG default: Exec #48: mount --mkdir --rbind --make-rslave /dev /mnt/antiX/dev
2023-07-15 14:28:17.778 DBG default: Exit #48: 0
2023-07-15 14:28:17.778 DBG default: Exec #49: mount --mkdir --rbind --make-rslave /sys /mnt/antiX/sys
2023-07-15 14:28:17.782 DBG default: Exit #49: 0
2023-07-15 14:28:17.782 DBG default: Exec #50: mount --mkdir --rbind /proc /mnt/antiX/proc
2023-07-15 14:28:17.787 DBG default: Exit #50: 0
2023-07-15 14:28:17.787 DBG default: Exec #51: mount --mkdir -t tmpfs -o size=100m,nodev,mode=755 tmpfs /mnt/antiX/run
2023-07-15 14:28:17.790 DBG default: Exit #51: 0
2023-07-15 14:28:17.790 DBG default: Exec #52: mount --mkdir --rbind /run/udev /mnt/antiX/run/udev
2023-07-15 14:28:17.794 DBG default: Exit #52: 0
2023-07-15 14:28:17.794 DBG default: ++ Fixing configuration ++
2023-07-15 14:28:17.799 DBG default: Bash #53: /usr/sbin/live-to-installed /mnt/antiX
2023-07-15 14:28:17.830 DBG default: SErr #53: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\nfind: cannot delete \xE2\x80\x98/mnt/antiX/run/udev\xE2\x80\x99: Device or resource busy\n"
2023-07-15 14:28:17.830 DBG default: Exit #53: 0
2023-07-15 14:28:17.830 DBG default: Desktop menu
2023-07-15 14:28:17.830 DBG default: Exec #54: chroot /mnt/antiX desktop-menu --write-out-global
2023-07-15 14:28:17.835 DBG default: SErr #54: "/usr/sbin/chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2023-07-15 14:28:17.835 DBG default: Exit #54: 127
2023-07-15 14:28:17.835 DBG default: Exec #55: rm -rf /mnt/antiX/home/demo
2023-07-15 14:28:17.851 DBG default: Exit #55: 0
2023-07-15 14:28:17.851 DBG default: Change root: /mnt/antiX
2023-07-15 14:28:17.853 DBG default: Exec #56: rm /var/lib/dbus/machine-id /etc/machine-id
2023-07-15 14:28:17.859 DBG default: Exit #56: 0
2023-07-15 14:28:17.859 DBG default: Exec #57: dbus-uuidgen --ensure=/etc/machine-id
2023-07-15 14:28:17.875 DBG default: Exit #57: 0
2023-07-15 14:28:17.875 DBG default: Exec #58: dbus-uuidgen --ensure
2023-07-15 14:28:17.882 DBG default: Exit #58: 0
2023-07-15 14:28:17.882 DBG default: Change root: 
2023-07-15 14:28:17.883 DBG default: Bash #59: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2023-07-15 14:28:17.896 DBG default: Exit #59: 1
2023-07-15 14:28:17.896 DBG default: Bash #60: mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-15 14:28:17.901 DBG default: Exit #60: 1
2023-07-15 14:28:17.901 DBG default: Bash #61: mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-15 14:28:17.905 DBG default: Exit #61: 1
2023-07-15 14:28:17.905 DBG default: Bash #62: mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-15 14:28:17.909 DBG default: Exit #62: 1
2023-07-15 14:28:17.909 DBG default: Bash #63: mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-15 14:28:17.913 DBG default: Exit #63: 1
2023-07-15 14:28:17.913 DBG default: Bash #64: mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2023-07-15 14:28:17.916 DBG default: Exit #64: 1
2023-07-15 14:28:17.916 DBG default: Creating fstab entry for: "/" "/dev/nvme0n1p6"
2023-07-15 14:28:17.916 DBG default: Exec #65: blkid /dev/nvme0n1p6 -o value -s TYPE
2023-07-15 14:28:17.921 DBG default: Exit #65: 0
2023-07-15 14:28:17.921 DBG default: Bash #66: rmdir --ignore-fail-on-non-empty /mnt/antiX/media/sd*
2023-07-15 14:28:17.925 DBG default: SErr #66: "rmdir: failed to remove '/mnt/antiX/media/sd*': No such file or directory\n"
2023-07-15 14:28:17.925 DBG default: Exit #66: 1
2023-07-15 14:28:17.925 DBG default: ++ Paused for required operator input ++
2023-07-15 14:28:29.588 DBG default: ++ Setting system configuration ++
2023-07-15 14:28:29.590 DBG default: Change root: /mnt/antiX
2023-07-15 14:28:29.591 DBG default: Set service: "acpid" true
2023-07-15 14:28:29.591 DBG default: Exec #67: update-rc.d acpid defaults
2023-07-15 14:28:29.631 DBG default: Exit #67: 0
2023-07-15 14:28:29.631 DBG default: Exec #68: systemctl unmask acpid
2023-07-15 14:28:29.640 DBG default: Exit #68: 0
2023-07-15 14:28:29.640 DBG default: Exec #69: systemctl enable acpid
2023-07-15 14:28:29.706 DBG default: SErr #69: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2023-07-15 14:28:29.706 DBG default: Exit #69: 0
2023-07-15 14:28:29.706 DBG default: Set service: "cpufrequtils" true
2023-07-15 14:28:29.706 DBG default: Exec #70: update-rc.d cpufrequtils defaults
2023-07-15 14:28:29.738 DBG default: Exit #70: 0
2023-07-15 14:28:29.738 DBG default: Exec #71: systemctl unmask cpufrequtils
2023-07-15 14:28:29.743 DBG default: Exit #71: 0
2023-07-15 14:28:29.743 DBG default: Exec #72: systemctl enable cpufrequtils
2023-07-15 14:28:29.803 DBG default: SErr #72: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2023-07-15 14:28:29.803 DBG default: Exit #72: 0
2023-07-15 14:28:29.803 DBG default: Set service: "dbus" true
2023-07-15 14:28:29.803 DBG default: Exec #73: update-rc.d dbus defaults
2023-07-15 14:28:29.833 DBG default: Exit #73: 0
2023-07-15 14:28:29.833 DBG default: Exec #74: systemctl unmask dbus
2023-07-15 14:28:29.839 DBG default: Exit #74: 0
2023-07-15 14:28:29.839 DBG default: Exec #75: systemctl enable dbus
2023-07-15 14:28:29.894 DBG default: SErr #75: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2023-07-15 14:28:29.894 DBG default: Exit #75: 0
2023-07-15 14:28:29.894 DBG default: Set service: "haveged" true
2023-07-15 14:28:29.894 DBG default: Exec #76: update-rc.d haveged defaults
2023-07-15 14:28:29.927 DBG default: Exit #76: 0
2023-07-15 14:28:29.927 DBG default: Exec #77: systemctl unmask haveged
2023-07-15 14:28:29.932 DBG default: Exit #77: 0
2023-07-15 14:28:29.932 DBG default: Exec #78: systemctl enable haveged
2023-07-15 14:28:29.990 DBG default: SErr #78: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2023-07-15 14:28:29.990 DBG default: Exit #78: 0
2023-07-15 14:28:29.990 DBG default: Set service: "saned" true
2023-07-15 14:28:29.990 DBG default: Exec #79: update-rc.d saned defaults
2023-07-15 14:28:30.021 DBG default: Exit #79: 0
2023-07-15 14:28:30.021 DBG default: Exec #80: systemctl unmask saned
2023-07-15 14:28:30.027 DBG default: Exit #80: 0
2023-07-15 14:28:30.027 DBG default: Exec #81: systemctl enable saned
2023-07-15 14:28:30.087 DBG default: SErr #81: "Synchronizing state of saned.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable saned\nFailed to enable unit, unit /lib/systemd/system/saned.service is masked.\n"
2023-07-15 14:28:30.087 DBG default: Exit #81: 1
2023-07-15 14:28:30.087 DBG default: Set service: "smartmontools" true
2023-07-15 14:28:30.087 DBG default: Exec #82: update-rc.d smartmontools defaults
2023-07-15 14:28:30.119 DBG default: Exit #82: 0
2023-07-15 14:28:30.119 DBG default: Exec #83: systemctl unmask smartmontools
2023-07-15 14:28:30.125 DBG default: Exit #83: 0
2023-07-15 14:28:30.125 DBG default: Exec #84: systemctl enable smartmontools
2023-07-15 14:28:30.181 DBG default: SErr #84: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2023-07-15 14:28:30.181 DBG default: Exit #84: 0
2023-07-15 14:28:30.181 DBG default: Set service: "anacron" true
2023-07-15 14:28:30.181 DBG default: Exec #85: update-rc.d anacron defaults
2023-07-15 14:28:30.210 DBG default: Exit #85: 0
2023-07-15 14:28:30.210 DBG default: Exec #86: systemctl unmask anacron
2023-07-15 14:28:30.216 DBG default: Exit #86: 0
2023-07-15 14:28:30.216 DBG default: Exec #87: systemctl enable anacron
2023-07-15 14:28:30.277 DBG default: SErr #87: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2023-07-15 14:28:30.277 DBG default: Exit #87: 0
2023-07-15 14:28:30.277 DBG default: Set service: "cron" true
2023-07-15 14:28:30.277 DBG default: Exec #88: update-rc.d cron defaults
2023-07-15 14:28:30.306 DBG default: Exit #88: 0
2023-07-15 14:28:30.306 DBG default: Exec #89: systemctl unmask cron
2023-07-15 14:28:30.312 DBG default: Exit #89: 0
2023-07-15 14:28:30.312 DBG default: Exec #90: systemctl enable cron
2023-07-15 14:28:30.377 DBG default: SErr #90: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2023-07-15 14:28:30.377 DBG default: Exit #90: 0
2023-07-15 14:28:30.377 DBG default: Set service: "sudo" true
2023-07-15 14:28:30.377 DBG default: Exec #91: update-rc.d sudo defaults
2023-07-15 14:28:30.408 DBG default: Exit #91: 0
2023-07-15 14:28:30.408 DBG default: Exec #92: systemctl unmask sudo
2023-07-15 14:28:30.414 DBG default: Exit #92: 0
2023-07-15 14:28:30.414 DBG default: Exec #93: systemctl enable sudo
2023-07-15 14:28:30.476 DBG default: SErr #93: "Synchronizing state of sudo.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable sudo\nFailed to enable unit, unit /lib/systemd/system/sudo.service is masked.\n"
2023-07-15 14:28:30.476 DBG default: Exit #93: 1
2023-07-15 14:28:30.476 DBG default: Set service: "zramswap" false
2023-07-15 14:28:30.476 DBG default: Exec #94: update-rc.d zramswap remove
2023-07-15 14:28:30.505 DBG default: Exit #94: 0
2023-07-15 14:28:30.505 DBG default: Exec #95: systemctl disable zramswap
2023-07-15 14:28:30.565 DBG default: SErr #95: "Synchronizing state of zramswap.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable zramswap\ninsserv: warning: current start runlevel(s) (empty) of script `zramswap' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `zramswap' overrides LSB defaults (0 1 6).\nUnit /etc/systemd/system/zramswap.service is masked, ignoring.\n"
2023-07-15 14:28:30.565 DBG default: Exit #95: 0
2023-07-15 14:28:30.565 DBG default: Exec #96: systemctl mask zramswap
2023-07-15 14:28:30.571 DBG default: Exit #96: 0
2023-07-15 14:28:30.571 DBG default: Set service: "bluetooth" true
2023-07-15 14:28:30.571 DBG default: Exec #97: update-rc.d bluetooth defaults
2023-07-15 14:28:30.601 DBG default: Exit #97: 0
2023-07-15 14:28:30.601 DBG default: Exec #98: systemctl unmask bluetooth
2023-07-15 14:28:30.606 DBG default: Exit #98: 0
2023-07-15 14:28:30.606 DBG default: Exec #99: systemctl enable bluetooth
2023-07-15 14:28:30.674 DBG default: SErr #99: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2023-07-15 14:28:30.674 DBG default: Exit #99: 0
2023-07-15 14:28:30.674 DBG default: Set service: "rsync" true
2023-07-15 14:28:30.674 DBG default: Exec #100: update-rc.d rsync defaults
2023-07-15 14:28:30.706 DBG default: Exit #100: 0
2023-07-15 14:28:30.706 DBG default: Exec #101: systemctl unmask rsync
2023-07-15 14:28:30.713 DBG default: Exit #101: 0
2023-07-15 14:28:30.713 DBG default: Exec #102: systemctl enable rsync
2023-07-15 14:28:30.776 DBG default: SErr #102: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\nCreated symlink /etc/systemd/system/multi-user.target.wants/rsync.service \xE2\x86\x92 /lib/systemd/system/rsync.service.\n"
2023-07-15 14:28:30.776 DBG default: Exit #102: 0
2023-07-15 14:28:30.776 DBG default: Set service: "cups" true
2023-07-15 14:28:30.776 DBG default: Exec #103: update-rc.d cups defaults
2023-07-15 14:28:30.808 DBG default: Exit #103: 0
2023-07-15 14:28:30.808 DBG default: Exec #104: systemctl unmask cups
2023-07-15 14:28:30.814 DBG default: Exit #104: 0
2023-07-15 14:28:30.814 DBG default: Exec #105: systemctl enable cups
2023-07-15 14:28:30.874 DBG default: SErr #105: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2023-07-15 14:28:30.874 DBG default: Exit #105: 0
2023-07-15 14:28:30.875 DBG default: Set service: "smbd" true
2023-07-15 14:28:30.875 DBG default: Exec #106: update-rc.d smbd defaults
2023-07-15 14:28:30.906 DBG default: Exit #106: 0
2023-07-15 14:28:30.906 DBG default: Exec #107: systemctl unmask smbd
2023-07-15 14:28:30.912 DBG default: Exit #107: 0
2023-07-15 14:28:30.912 DBG default: Exec #108: systemctl enable smbd
2023-07-15 14:28:30.976 DBG default: SErr #108: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2023-07-15 14:28:30.976 DBG default: Exit #108: 0
2023-07-15 14:28:30.976 DBG default: Set service: "nmbd" true
2023-07-15 14:28:30.976 DBG default: Exec #109: update-rc.d nmbd defaults
2023-07-15 14:28:31.007 DBG default: Exit #109: 0
2023-07-15 14:28:31.007 DBG default: Exec #110: systemctl unmask nmbd
2023-07-15 14:28:31.013 DBG default: Exit #110: 0
2023-07-15 14:28:31.013 DBG default: Exec #111: systemctl enable nmbd
2023-07-15 14:28:31.074 DBG default: SErr #111: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2023-07-15 14:28:31.074 DBG default: Exit #111: 0
2023-07-15 14:28:31.074 DBG default: Set service: "samba-ad-dc" true
2023-07-15 14:28:31.074 DBG default: Exec #112: update-rc.d samba-ad-dc defaults
2023-07-15 14:28:31.108 DBG default: Exit #112: 0
2023-07-15 14:28:31.108 DBG default: Exec #113: systemctl unmask samba-ad-dc
2023-07-15 14:28:31.113 DBG default: Exit #113: 0
2023-07-15 14:28:31.113 DBG default: Exec #114: systemctl enable samba-ad-dc
2023-07-15 14:28:31.177 DBG default: SErr #114: "Synchronizing state of samba-ad-dc.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable samba-ad-dc\n"
2023-07-15 14:28:31.177 DBG default: Exit #114: 0
2023-07-15 14:28:31.177 DBG default: Change root: 
2023-07-15 14:28:31.179 DBG default: Exec #115: sed -i s/WORKGROUP/Windrush/g /mnt/antiX/etc/samba/smb.conf
2023-07-15 14:28:31.184 DBG default: Exit #115: 0
2023-07-15 14:28:31.184 DBG default: Bash #116: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Main/' /mnt/antiX/etc/hosts
2023-07-15 14:28:31.193 DBG default: Exit #116: 0
2023-07-15 14:28:31.193 DBG default: Bash #117: echo "Main" | cat > /mnt/antiX/etc/hostname
2023-07-15 14:28:31.197 DBG default: Exit #117: 0
2023-07-15 14:28:31.197 DBG default: Bash #118: echo "Main" | cat > /mnt/antiX/etc/mailname
2023-07-15 14:28:31.202 DBG default: Exit #118: 0
2023-07-15 14:28:31.202 DBG default: Bash #119: sed -i 's/.*send host-name.*/send host-name "Main";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2023-07-15 14:28:31.208 DBG default: Exit #119: 0
2023-07-15 14:28:31.208 DBG default: Bash #120: echo "Main" | cat > /mnt/antiX/etc/defaultdomain
2023-07-15 14:28:31.214 DBG default: Exit #120: 0
2023-07-15 14:28:31.214 DBG default: << void Oobe::setLocale() >>
2023-07-15 14:28:31.214 DBG default: Update locale
2023-07-15 14:28:31.214 DBG default: Bash #121: chroot /mnt/antiX /usr/sbin/update-locale "LANG=en_US.UTF-8"
2023-07-15 14:28:31.232 DBG default: Exit #121: 0
2023-07-15 14:28:31.232 DBG default: Exec #122: ln -nfs /usr/share/zoneinfo/America/New_York /mnt/antiX/etc/localtime
2023-07-15 14:28:31.236 DBG default: Exit #122: 0
2023-07-15 14:28:31.236 DBG default: Exec #123: ln -nfs /usr/share/zoneinfo/America/New_York /etc/localtime
2023-07-15 14:28:31.241 DBG default: Exit #123: 0
2023-07-15 14:28:31.241 DBG default: Bash #124: echo America/New_York > /mnt/antiX/etc/timezone
2023-07-15 14:28:31.245 DBG default: Exit #124: 0
2023-07-15 14:28:31.245 DBG default: Bash #125: echo America/New_York > /etc/timezone
2023-07-15 14:28:31.249 DBG default: Exit #125: 0
2023-07-15 14:28:31.249 DBG default: Bash #126: echo '0.0 0 0.0
0
LOCAL' > /etc/adjtime
2023-07-15 14:28:31.252 DBG default: Exit #126: 0
2023-07-15 14:28:31.252 DBG default: Exec #127: hwclock --hctosys
2023-07-15 14:28:31.000 DBG default: Exit #127: 0
2023-07-15 14:28:31.000 DBG default: Exec #128: cp -f /etc/adjtime /mnt/antiX/etc/
2023-07-15 14:28:31.007 DBG default: Exit #128: 0
2023-07-15 14:28:31.007 DBG default: Exec #129: cp -f /etc/default/rcS /mnt/antiX/etc/default
2023-07-15 14:28:31.011 DBG default: Exit #129: 0
2023-07-15 14:28:31.011 DBG default: Bash #130: sed -i '/data0=/c\data0=%l:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-15 14:28:31.015 DBG default: SErr #130: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-15 14:28:31.015 DBG default: Exit #130: 2
2023-07-15 14:28:31.015 DBG default: Bash #131: sed -i '/data0=/c\data0=%l:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-15 14:28:31.020 DBG default: SErr #131: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-15 14:28:31.020 DBG default: Exit #131: 2
2023-07-15 14:28:31.020 DBG default: Bash #132: sed -i '/time_format=/c\time_format=%l:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2023-07-15 14:28:31.024 DBG default: SErr #132: "sed: can't read /home/demo/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-15 14:28:31.024 DBG default: Exit #132: 2
2023-07-15 14:28:31.024 DBG default: Bash #133: sed -i '/time_format=/c\time_format=%l:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2023-07-15 14:28:31.029 DBG default: SErr #133: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-15 14:28:31.029 DBG default: Exit #133: 2
2023-07-15 14:28:31.029 DBG default: Bash #134: sed -i 's/%H/%l/' /home/demo/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-15 14:28:31.033 DBG default: Exit #134: 0
2023-07-15 14:28:31.033 DBG default: Bash #135: sed -i 's/%H/%l/' /mnt/antiX/etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-15 14:28:31.038 DBG default: Exit #135: 0
2023-07-15 14:28:31.038 DBG default: Bash #136: sed -i '/use24hFormat=/c\use24hFormat=0' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-15 14:28:31.042 DBG default: SErr #136: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-15 14:28:31.042 DBG default: Exit #136: 2
2023-07-15 14:28:31.042 DBG default: Bash #137: sed -i '/use24hFormat=/c\use24hFormat=0' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-15 14:28:31.047 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-15 14:28:31.047 DBG default: Exit #137: 2
2023-07-15 14:28:31.047 DBG default: Bash #138: sed -i '/time1_format/c\time1_format=%l:%M' /mnt/antiX/etc/skel/.config/tint2/tint2rc
2023-07-15 14:28:31.051 DBG default: SErr #138: "sed: can't read /mnt/antiX/etc/skel/.config/tint2/tint2rc: No such file or directory\n"
2023-07-15 14:28:31.051 DBG default: Exit #138: 2
2023-07-15 14:28:31.051 DBG default: Bash #139: sed -i '/time1_format/c\time1_format=%l:%M' /home/demo/.config/tint2/tint2rc
2023-07-15 14:28:31.056 DBG default: SErr #139: "sed: can't read /home/demo/.config/tint2/tint2rc: No such file or directory\n"
2023-07-15 14:28:31.056 DBG default: Exit #139: 2
2023-07-15 14:28:31.056 DBG default: Bash #140: sed -i 's/%H:%M/%l:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2023-07-15 14:28:31.060 DBG default: SErr #140: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2023-07-15 14:28:31.060 DBG default: Exit #140: 2
2023-07-15 14:28:31.060 DBG default: Bash #141: sed -i 's/%k:%M/%l:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2023-07-15 14:28:31.065 DBG default: SErr #141: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2023-07-15 14:28:31.065 DBG default: Exit #141: 2
2023-07-15 14:28:31.065 DBG default: Bash #142: sed -i 's/%H:%M/%l:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2023-07-15 14:28:31.069 DBG default: SErr #142: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2023-07-15 14:28:31.069 DBG default: Exit #142: 2
2023-07-15 14:28:31.069 DBG default: Localize repo
2023-07-15 14:28:31.069 DBG default: Exec #143: chroot /mnt/antiX localize-repo default
2023-07-15 14:28:31.099 DBG default: SOut #143: "File: mx.list\n"
2023-07-15 14:28:31.099 DBG default: Exit #143: 0
2023-07-15 14:28:31.099 DBG default: Change root: /mnt/antiX
2023-07-15 14:28:31.103 DBG default: Exec #144: chpasswd
2023-07-15 14:28:31.147 DBG default: Exit #144: 0
2023-07-15 14:28:31.147 DBG default: Change root: 
2023-07-15 14:28:31.151 DBG default: check for remastered home demo folder: false
2023-07-15 14:28:31.151 DBG default: Exec #145: cp -a /mnt/antiX/etc/skel /mnt/antiX/home/jmorris
2023-07-15 14:28:31.231 DBG default: Exit #145: 0
2023-07-15 14:28:31.231 DBG default: Exec #146: chown -R demo:demo /mnt/antiX/home/jmorris
2023-07-15 14:28:31.240 DBG default: Exit #146: 0
2023-07-15 14:28:31.240 DBG default: Exec #147: sed -i s/demo/jmorris/g /mnt/antiX/etc/group
2023-07-15 14:28:31.245 DBG default: Exit #147: 0
2023-07-15 14:28:31.245 DBG default: Exec #148: sed -i s/demo/jmorris/g /mnt/antiX/etc/gshadow
2023-07-15 14:28:31.249 DBG default: Exit #148: 0
2023-07-15 14:28:31.249 DBG default: Exec #149: sed -i s/demo/jmorris/g /mnt/antiX/etc/passwd
2023-07-15 14:28:31.253 DBG default: Exit #149: 0
2023-07-15 14:28:31.254 DBG default: Exec #150: sed -i s/demo/jmorris/g /mnt/antiX/etc/shadow
2023-07-15 14:28:31.257 DBG default: Exit #150: 0
2023-07-15 14:28:31.257 DBG default: Exec #151: sed -i s/demo/jmorris/g /mnt/antiX/etc/subuid
2023-07-15 14:28:31.261 DBG default: Exit #151: 0
2023-07-15 14:28:31.262 DBG default: Exec #152: sed -i s/demo/jmorris/g /mnt/antiX/etc/subgid
2023-07-15 14:28:31.266 DBG default: Exit #152: 0
2023-07-15 14:28:31.266 DBG default: Exec #153: sed -i s/demo/jmorris/g /mnt/antiX/etc/slim.conf
2023-07-15 14:28:31.269 DBG default: SErr #153: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-15 14:28:31.269 DBG default: Exit #153: 2
2023-07-15 14:28:31.269 DBG default: Exec #154: sed -i s/demo/jmorris/g /mnt/antiX/etc/lightdm/lightdm.conf
2023-07-15 14:28:31.274 DBG default: Exit #154: 0
2023-07-15 14:28:31.274 DBG default: Exec #155: sed -i s/demo/jmorris/g /mnt/antiX/home/*/.gtkrc-2.0
2023-07-15 14:28:31.278 DBG default: SErr #155: "/usr/bin/sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2023-07-15 14:28:31.278 DBG default: Exit #155: 2
2023-07-15 14:28:31.278 DBG default: Exec #156: sed -i s/demo/jmorris/g /mnt/antiX/root/.gtkrc-2.0
2023-07-15 14:28:31.281 DBG default: SErr #156: "/usr/bin/sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2023-07-15 14:28:31.281 DBG default: Exit #156: 2
2023-07-15 14:28:31.281 DBG default: Exec #157: sed -i s/auto_login/#auto_login/g /mnt/antiX/etc/slim.conf
2023-07-15 14:28:31.285 DBG default: SErr #157: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-15 14:28:31.285 DBG default: Exit #157: 2
2023-07-15 14:28:31.285 DBG default: Exec #158: sed -i "s/default_user /#default_user /g" /mnt/antiX/etc/slim.conf
2023-07-15 14:28:31.289 DBG default: SErr #158: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-15 14:28:31.289 DBG default: Exit #158: 2
2023-07-15 14:28:31.289 DBG default: Exec #159: sed -i s/autologin-user=/#autologin-user=/g /mnt/antiX/etc/lightdm/lightdm.conf
2023-07-15 14:28:31.294 DBG default: Exit #159: 0
2023-07-15 14:28:31.294 DBG default: Exec #160: sed -i s/User=.*/User=/g /mnt/antiX/etc/sddm.conf
2023-07-15 14:28:31.298 DBG default: SErr #160: "/usr/bin/sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2023-07-15 14:28:31.298 DBG default: Exit #160: 2
2023-07-15 14:28:31.298 DBG default: Exec #161: touch /mnt/antiX/var/mail/jmorris
2023-07-15 14:28:31.301 DBG default: Exit #161: 0
2023-07-15 14:28:31.308 DBG default: Exec #162: sync
2023-07-15 14:28:31.318 DBG default: Exit #162: 0
2023-07-15 14:28:31.318 DBG default: << void SwapMan::install(QStringList&) >>
2023-07-15 14:28:31.322 DBG default: << void BootMan::install(const QStringList&) >>
2023-07-15 14:28:31.329 DBG default: Bash #163: ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2023-07-15 14:28:31.337 DBG default: Exit #163: 1
2023-07-15 14:28:31.337 DBG default: ++ Updating initramfs ++
2023-07-15 14:28:31.340 DBG default: Exec #164: sed -i -r s/MODULES=.*/MODULES=dep/ /etc/initramfs-tools/initramfs.conf
2023-07-15 14:28:31.345 DBG default: Exit #164: 0
2023-07-15 14:28:31.345 DBG default: Exec #165: update-initramfs -u -t -k all
2023-07-15 14:28:31.438 DBG default: SOut #165: "update-initramfs: Generating /boot/initrd.img-6.1.0-10-amd64\n"
2023-07-15 14:28:31.438 DBG default: SErr #165: "mkinitramfs: failed to determine device for /\nmkinitramfs: workaround is MODULES=most, check:\ngrep -r MODULES /etc/initramfs-tools\n\nError please report bug on initramfs-tools\nInclude the output of 'mount' and 'cat /proc/mounts'\nupdate-initramfs: failed for /boot/initrd.img-6.1.0-10-amd64 with 1.\n"
2023-07-15 14:28:31.439 DBG default: Exit #165: 1
2023-07-15 14:28:31.439 DBG default: -- FAILED Phase 4 - Failed to update initramfs. --
2023-07-15 14:28:31.455 DBG default: << void MProcess::halt(bool) >>
2023-07-15 14:28:31.479 DBG default: << void MInstall::cleanup() >>
2023-07-15 14:28:31.479 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2023-07-15 14:28:31.479 DBG default:  - Product: MX Linux 23
2023-07-15 14:28:31.479 DBG default:  - Version: 23.7.06mx23
2023-07-15 14:28:31.479 DBG default:  = GRUB:
2023-07-15 14:28:31.479 DBG default:    - Install: false
2023-07-15 14:28:31.479 DBG default:    - Location: nvme0n1p1
2023-07-15 14:28:31.479 DBG default:    - TargetType: ESP
2023-07-15 14:28:31.479 DBG default:  = Localization:
2023-07-15 14:28:31.479 DBG default:    - ClockHours: 12
2023-07-15 14:28:31.479 DBG default:    - LocalClock: true
2023-07-15 14:28:31.479 DBG default:    - Locale: en_US.UTF-8
2023-07-15 14:28:31.480 DBG default:    - Timezone: America/New_York
2023-07-15 14:28:31.480 DBG default:  = Network:
2023-07-15 14:28:31.480 DBG default:    - ComputerName: Main
2023-07-15 14:28:31.480 DBG default:    - Domain: example.dom
2023-07-15 14:28:31.480 DBG default:    - Samba: true
2023-07-15 14:28:31.480 DBG default:    - Workgroup: Windrush
2023-07-15 14:28:31.480 DBG default:  = Services:
2023-07-15 14:28:31.480 DBG default:    - acpid: true
2023-07-15 14:28:31.480 DBG default:    - anacron: true
2023-07-15 14:28:31.480 DBG default:    - bluetooth: true
2023-07-15 14:28:31.480 DBG default:    - cpufrequtils: true
2023-07-15 14:28:31.480 DBG default:    - cron: true
2023-07-15 14:28:31.480 DBG default:    - cups: true
2023-07-15 14:28:31.480 DBG default:    - dbus: true
2023-07-15 14:28:31.480 DBG default:    - haveged: true
2023-07-15 14:28:31.480 DBG default:    - rsync: true
2023-07-15 14:28:31.480 DBG default:    - saned: true
2023-07-15 14:28:31.480 DBG default:    - smartmontools: true
2023-07-15 14:28:31.480 DBG default:    - sudo: true
2023-07-15 14:28:31.480 DBG default:    - zramswap: false
2023-07-15 14:28:31.480 DBG default:  = Storage:
2023-07-15 14:28:31.480 DBG default:    - Target: Partitions
2023-07-15 14:28:31.480 DBG default:  = Storage.nvme0n1p1:
2023-07-15 14:28:31.480 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.480 DBG default:    - Dump: false
2023-07-15 14:28:31.480 DBG default:    - Encrypt: false
2023-07-15 14:28:31.480 DBG default:    - Format: PRESERVE
2023-07-15 14:28:31.480 DBG default:    - Pass: ???
2023-07-15 14:28:31.480 DBG default:    - Size: 104857600
2023-07-15 14:28:31.480 DBG default:    - UseFor: ESP
2023-07-15 14:28:31.480 DBG default:  = Storage.nvme0n1p2:
2023-07-15 14:28:31.480 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.480 DBG default:    - Dump: false
2023-07-15 14:28:31.480 DBG default:    - Encrypt: false
2023-07-15 14:28:31.480 DBG default:    - Pass: ???
2023-07-15 14:28:31.480 DBG default:    - Size: 16777216
2023-07-15 14:28:31.480 DBG default:  = Storage.nvme0n1p3:
2023-07-15 14:28:31.480 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.480 DBG default:    - Dump: false
2023-07-15 14:28:31.480 DBG default:    - Encrypt: false
2023-07-15 14:28:31.480 DBG default:    - Pass: ???
2023-07-15 14:28:31.480 DBG default:    - Size: 947515293696
2023-07-15 14:28:31.480 DBG default:  = Storage.nvme0n1p4:
2023-07-15 14:28:31.480 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.480 DBG default:    - Dump: false
2023-07-15 14:28:31.480 DBG default:    - Encrypt: false
2023-07-15 14:28:31.480 DBG default:    - Pass: ???
2023-07-15 14:28:31.480 DBG default:    - Size: 589299712
2023-07-15 14:28:31.480 DBG default:  = Storage.nvme0n1p5:
2023-07-15 14:28:31.480 DBG default:    - Active: true
2023-07-15 14:28:31.480 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.480 DBG default:    - Dump: false
2023-07-15 14:28:31.481 DBG default:    - Encrypt: false
2023-07-15 14:28:31.481 DBG default:    - Pass: ???
2023-07-15 14:28:31.481 DBG default:    - Size: 30041702400
2023-07-15 14:28:31.481 DBG default:  = Storage.nvme0n1p6:
2023-07-15 14:28:31.481 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.481 DBG default:    - Dump: true
2023-07-15 14:28:31.481 DBG default:    - Encrypt: false
2023-07-15 14:28:31.481 DBG default:    - Format: ext4
2023-07-15 14:28:31.481 DBG default:    - Label: rootMX23
2023-07-15 14:28:31.481 DBG default:    - Options: discard,noatime
2023-07-15 14:28:31.481 DBG default:    - Pass: ???
2023-07-15 14:28:31.481 DBG default:    - Size: 21933064192
2023-07-15 14:28:31.481 DBG default:    - UseFor: /
2023-07-15 14:28:31.481 DBG default:  = Storage.sdb1:
2023-07-15 14:28:31.481 DBG default:    - CheckBadBlocks: false
2023-07-15 14:28:31.481 DBG default:    - Dump: false
2023-07-15 14:28:31.481 DBG default:    - Encrypt: false
2023-07-15 14:28:31.481 DBG default:    - Pass: ???
2023-07-15 14:28:31.481 DBG default:    - Size: 16230891008
2023-07-15 14:28:31.481 DBG default:  = Swap:
2023-07-15 14:28:31.481 DBG default:    - File: /swap/swap
2023-07-15 14:28:31.481 DBG default:    - Hibernation: false
2023-07-15 14:28:31.481 DBG default:    - Install: false
2023-07-15 14:28:31.481 DBG default:    - Size: 4096
2023-07-15 14:28:31.481 DBG default:  = User:
2023-07-15 14:28:31.481 DBG default:    - Autologin: false
2023-07-15 14:28:31.481 DBG default:    - EnableRoot: true
2023-07-15 14:28:31.481 DBG default:    - SaveDesktop: false
2023-07-15 14:28:31.481 DBG default:    - Username: jmorris
2023-07-15 14:28:31.481 DBG default: End of configuration.
2023-07-15 14:28:31.483 DBG default: Exec #166: rm -rf /mnt/antiX/mnt/antiX
2023-07-15 14:28:31.492 DBG default: Exit #166: 0
2023-07-15 14:28:31.492 DBG default: Exec #167: swapon --show=NAME --noheadings
2023-07-15 14:28:31.496 DBG default: Exit #167: 0
2023-07-15 14:28:31.496 DBG default: Exec #168: umount -qR /mnt/antiX
2023-07-15 14:28:32.441 DBG default: Exit #168: 0
2023-07-15 14:28:32.441 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-15 14:28:32.441 DBG default: Bash #169: ps -e | grep 'udisksd'
2023-07-15 14:28:32.456 DBG default: SOut #169: "   5280 ?        00:00:00 udisksd\n"
2023-07-15 14:28:32.456 DBG default: Exit #169: 0
2023-07-15 14:28:32.456 DBG default: Bash #170: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-15 14:28:32.463 DBG default: Exit #170: 0
2023-07-15 14:28:32.463 DBG default: Exec #171: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-15 14:28:32.469 DBG default: Exit #171: 0
2023-07-15 14:28:32.469 DBG default: Exec #172: udevadm control --reload
2023-07-15 14:28:32.476 DBG default: SErr #172: "Failed to send reload request: No such file or directory\n"
2023-07-15 14:28:32.476 DBG default: Exit #172: 1
2023-07-15 14:28:32.476 DBG default: Exec #173: partprobe -s
2023-07-15 14:28:32.864 DBG default: SOut #173: "/dev/sdb: gpt partitions 1\n/dev/nvme0n1: gpt partitions 1 2 3 5 6 4\n/dev/zram0: loop partitions 1\n"
2023-07-15 14:28:32.864 DBG default: Exit #173: 0
2023-07-15 14:28:32.868 DBG default: Sleep #1: 1000ms
2023-07-15 14:28:33.918 DBG default: Sleep #1: exit 0
2023-07-15 14:28:33.918 DBG default: Bash #174: rm -f /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-15 14:28:33.926 DBG default: Exit #174: 0

[Eadwine Rose]

Whoa... please put the output between code tags, thanks

[whuser]

I am running it on a new low end pocket sized laptop. Intel Celeron J4105 cpu. I tried to solve the no sound issue in MX-21.3 because MX-23 uses pipewire by default. But it had more problems:

1. I tried to play a 1080p video. VLC is not usable. The video lags, slow and uses a lot of (nearly all) CPU resources. (The same video can be played in MX-21.3 without any issues except sound card issue)
2. Then I installed mplayer. mplayer can play the video successfully. But it uses more CPU resources than MX-21.3.
3. The sound card is working with pipewire. But the volume is too low. I can barely hear the sound. This issue not only happens in speaker, but also happens in bluetooth headphone. Although bluetooth headphone volume is a little better than the speaker.

Code: Select all

$ inxi -F
System:
  Host: deeq Kernel: 6.3.0-2mx-ahs-amd64 arch: x86_64 bits: 64 Console: pty pts/1
    Distro: MX-23_ahs_RC2_x64 Libretto July 15 2023
Machine:
  Type: Laptop Mobo: N/A model: N/A v: 2.1 serial: <superuser required> UEFI: American Megatrends
    v: X836_A_A25_M4U3P0E1C1S3P1A3R1F0W5T6_Intel3D_LM084 date: 04/13/2023
Battery:
  ID-1: BAT0 charge: 22.2 Wh (100.0%) condition: 22.2/22.2 Wh (100.0%)
CPU:
  Info: quad core model: Intel Celeron J4105 bits: 64 type: MCP cache: L2: 4 MiB
  Speed (MHz): avg: 874 min/max: 800/2500 cores: 1: 900 2: 800 3: 900 4: 899
Graphics:
  Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel
  Device-2: BRS 2Mp Camera type: USB driver: uvcvideo
  Display: x11 server: X.org v: 1.21.1.7 driver: X: loaded: modesetting unloaded: fbdev,vesa
    dri: iris gpu: i915 tty: 240x58
  API: OpenGL Message: GL data unavailable in console. Try -G --display
Audio:
  Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
    driver: sof-audio-pci-intel-apl
  API: ALSA v: k6.3.0-2mx-ahs-amd64 status: kernel-api
  Server-1: PipeWire v: 0.3.65 status: active
Network:
  Device-1: Intel Wireless 3165 driver: iwlwifi
  IF: wlan0 state: up mac: b0:60:88:83:0e:82
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb
  Report: hciconfig ID: hci0 state: up address: B0:60:88:83:0E:86 bt-v: 2.1
Drives:
  Local Storage: total: 2.77 TiB used: 7.24 GiB (0.3%)
  ID-1: /dev/sda vendor: Smart Modular Tech. model: ShiJi 1TB size: 931.51 GiB
  ID-2: /dev/sdb type: USB vendor: Realtek model: RTL9210 NVME size: 1.86 TiB
Partition:
  ID-1: / size: 598.05 GiB used: 7.19 GiB (1.2%) fs: ext4 dev: /dev/dm-0
  ID-2: /boot size: 2.39 GiB used: 51.7 MiB (2.1%) fs: ext4 dev: /dev/sda6
  ID-3: /boot/efi size: 98.4 MiB used: 415 KiB (0.4%) fs: vfat dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 10 GiB used: 0 KiB (0.0%) dev: /dev/sda8
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 234 Uptime: 7m Memory: 11.53 GiB used: 1.15 GiB (10.0%) Init: systemd
  target: graphical (5) Shell: Bash inxi: 3.3.26