MX Linux Forum

Posted: **Fri Jul 08, 2022 4:23 am**

I do not have any sound from the Line Out port on the back of the PC. Headphones plugged into the port on the front work, and my Topping D-30 & A-30 work from the optical port. When I boot into Windows 10, the Line Out works OK. I am using the un-amplified speaker that are built into my Asus VA-229 monitor. I will note that the headphones connected to the front port have a lower volume with MX that they do with Windows. I will also note that MX Quick System Info IDs the audio as "Intel 200 Series PCH HD Audio". Windows Device Manager (image below) shows "Realtek Digital", "Realtek ALC1220A", "RealtekAudio" and "Intel Dispay Adio", and Asus calls it "SupremeFX S1220A". It is a high-resolution 5.1 channel surround sound with an SPDIF optical output on the back and a hi-res output for the headphone port. The headphones are MassDrop-Sennheiser HD-6XX 300-ohm impedance. The VA-229 monitor is connected with HDMI, but the built-in speakers use a standard 1/8 inch stereo cable.

I have all of the ALSAMixer controls raised, except for mic and capture which are a zero. I have Analog Stereo selected for the PulseAudio output. PulseAudio does show the change to headphones when I connect them.

I will greatly appreciate any help. Thank you in advance!

Quick System Info:

Code: Select all

System:
  Kernel: 5.10.0-15-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/vmlinuz-5.10.0-15-amd64 
  root=UUID=<filter> ro quiet splash 
  init=lib/systemd/systemd 
  Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM 
  Distro: MX-21.1_KDE_x64 Wildflower April 9  2022 base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Desktop Mobo: ASUSTeK model: ROG STRIX B365-F GAMING v: Rev X.0x 
  serial: <filter> UEFI-[Legacy]: American Megatrends v: 2201 date: 04/15/2021 
CPU:
  Info: Quad Core model: Intel Core i3-9100 bits: 64 type: MCP arch: Kaby Lake 
  note: check family: 6 model-id: 9E (158) stepping: B (11) microcode: F0 cache: 
  L2: 6 MiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 28800 
  Speed: 3887 MHz min/max: 800/4200 MHz Core speeds (MHz): 1: 3887 2: 3816 3: 3714 
  4: 3675 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
  Type: l1tf mitigation: PTE Inversion 
  Type: mds mitigation: Clear CPU buffers; SMT disabled 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 
  mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling 
  Type: srbds mitigation: Microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] 
  vendor: ASUSTeK 8th Gen Core Processor Gaussian Mixture Model driver: i915 v: kernel 
  bus-ID: 00:02.0 chip-ID: 8086:3e91 class-ID: 0300 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: modesetting 
  unloaded: fbdev,vesa display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
  s-diag: 582mm (22.9") 
  Monitor-1: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6") 
  diag: 546mm (21.5") 
  OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.2.5 
  direct render: Yes 
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: ASUSTeK driver: snd_hda_intel 
  v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403 
  Sound Server-1: ALSA v: k5.10.0-15-amd64 running: yes 
  Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:
  Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel port: f040 
  bus-ID: 00:1f.6 chip-ID: 8086:15b8 class-ID: 0200 
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Bluetooth:
  Device-1: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb v: 0.8 
  bus-ID: 1-13.4:4 chip-ID: 0a5c:21e8 class-ID: fe01 serial: <filter> 
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.1 
  sub-v: 220e hci-v: 4.1 rev: 16e4 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff 
  link-mode: slave accept service-classes: rendering, capturing, object transfer, audio 
Drives:
  Local Storage: total: 2.73 TiB used: 169.22 GiB (6.1%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 maj-min: 259:4 vendor: Western Digital model: WDS500G2B0C 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
  type: SSD serial: <filter> rev: 211210WD temp: 35.9 C scheme: GPT 
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
  type: SSD serial: <filter> rev: 102000WD temp: 39.9 C scheme: MBR 
  ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD1003FZEX-00K3CA0 
  size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s 
  type: HDD rpm: 7200 serial: <filter> rev: 1A01 scheme: GPT 
  ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WDS500G2B0A 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD 
  serial: <filter> rev: 90WD scheme: GPT 
  ID-5: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WDS500G2B0A 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD 
  serial: <filter> rev: 90WD scheme: GPT 
Partition:
  ID-1: / raw-size: 250 GiB size: 245.02 GiB (98.01%) used: 16.73 GiB (6.8%) fs: ext4 
  dev: /dev/nvme0n1p3 maj-min: 259:7 
  ID-2: /boot raw-size: 600 MiB size: 573.7 MiB (95.62%) used: 336 MiB (58.6%) fs: ext4 
  dev: /dev/nvme0n1p1 maj-min: 259:5 
  ID-3: /home raw-size: 151.17 GiB size: 147.74 GiB (97.73%) used: 31.34 GiB (21.2%) 
  fs: ext4 dev: /dev/nvme0n1p4 maj-min: 259:8 
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 64 GiB used: 1.8 MiB (0.0%) priority: -2 
  dev: /dev/nvme0n1p2 maj-min: 259:6 
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C 
  Fan Speeds (RPM): N/A 
Repos:
  Packages: 2788 note: see --pkg apt: 2780 lib: 1495 flatpak: 8 
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
  1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/librewolf.list 
  1: deb [arch=amd64] http://deb.librewolf.net bullseye main
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
  2: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye ahs
  Active apt repos in: /etc/apt/sources.list.d/syncthing.list 
  1: deb https://apt.syncthing.net/ syncthing stable
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
  1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
  Processes: 273 Uptime: 5h 25m wakeups: 1 Memory: 31.22 GiB used: 4.18 GiB (13.4%) 
  Init: systemd v: 247 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
  alt: 10 Shell: Bash v: 5.1.4 running-in: quick-system-info-mx 
  inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)

lspci

Code: Select all

xxxxxxx@mx:~
$ lspci
00:00.0 Host bridge: Intel Corporation 8th Gen Core 4-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] (rev 08)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #19 (rev f0)
00:1b.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #3 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a2cc
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
01:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller
02:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550 NVMe SSD (rev 01)
04:00.0 Non-Volatile memory controller: Sandisk Corp WD Black 2018/SN750 / PC SN720 NVMe SSD
xxxxxxx@mx:~
$

lsmod

Code: Select all

xxxxxxx@mx:~
$ lsmod
Module                  Size  Used by
rfcomm                 90112  16
cmac                   16384  3
algif_hash             16384  1
algif_skcipher         16384  1
af_alg                 32768  6 algif_hash,algif_skcipher
bnep                   28672  2
btusb                  65536  0
btrtl                  28672  1 btusb
btbcm                  20480  1 btusb
btintel                32768  1 btusb
bluetooth             741376  43 btrtl,btintel,btbcm,bnep,btusb,rfcomm
cpufreq_userspace      20480  0
jitterentropy_rng      16384  1
cpufreq_ondemand       16384  0
cpufreq_conservative    16384  0
drbg                   40960  1
cpufreq_powersave      20480  0
ansi_cprng             16384  0
hid_elecom             16384  0
ecdh_generic           16384  2 bluetooth
ecc                    36864  1 ecdh_generic
joydev                 28672  0
snd_hda_codec_hdmi     73728  1
snd_hda_codec_realtek   155648  1
snd_hda_codec_generic    98304  1 snd_hda_codec_realtek
intel_rapl_msr         20480  0
ledtrig_audio          16384  1 snd_hda_codec_generic
intel_rapl_common      28672  1 intel_rapl_msr
snd_hda_intel          57344  2
snd_intel_dspcfg       28672  1 snd_hda_intel
mei_hdcp               24576  0
soundwire_intel        45056  1 snd_intel_dspcfg
soundwire_generic_allocation    16384  1 soundwire_intel
snd_soc_core          315392  1 soundwire_intel
snd_compress           32768  1 snd_soc_core
soundwire_cadence      36864  1 soundwire_intel
snd_hda_codec         172032  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
x86_pkg_temp_thermal    20480  0
intel_powerclamp       20480  0
snd_hda_core          110592  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
coretemp               20480  0
snd_hwdep              16384  1 snd_hda_codec
rapl                   20480  0
intel_cstate           20480  0
eeepc_wmi              16384  0
uinput                 20480  1
soundwire_bus          90112  3 soundwire_intel,soundwire_generic_allocation,soundwire_cadence
asus_wmi               45056  1 eeepc_wmi
intel_uncore          176128  0
battery                20480  1 asus_wmi
snd_pcm               139264  7 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_compress,snd_soc_core,snd_hda_core
iTCO_wdt               16384  0
sparse_keymap          16384  1 asus_wmi
intel_pmc_bxt          16384  1 iTCO_wdt
rfkill                 28672  6 asus_wmi,bluetooth
wmi_bmof               16384  0
snd_timer              49152  1 snd_pcm
iTCO_vendor_support    16384  1 iTCO_wdt
snd                   110592  14 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm
watchdog               28672  1 iTCO_wdt
soundcore              16384  1 snd
ee1004                 20480  0
mei_me                 45056  1
sg                     36864  0
mei                   139264  3 mei_hdcp,mei_me
evdev                  28672  54
acpi_pad              184320  0
intel_pmc_core         45056  0
loop                   40960  0
parport_pc             40960  0
nfsd                  585728  13
ppdev                  24576  0
auth_rpcgss           151552  1 nfsd
nfs_acl                16384  1 nfsd
lockd                 122880  1 nfsd
grace                  16384  2 nfsd,lockd
lp                     20480  0
parport                69632  3 parport_pc,lp,ppdev
sunrpc                659456  18 nfsd,auth_rpcgss,lockd,nfs_acl
fuse                  167936  7
configfs               57344  1
ip_tables              32768  0
x_tables               53248  1 ip_tables
autofs4                53248  2
ext4                  925696  3
crc16                  16384  2 bluetooth,ext4
mbcache                16384  1 ext4
jbd2                  151552  1 ext4
hid_logitech_hidpp     49152  0
btrfs                1568768  0
blake2b_generic        20480  0
raid10                 65536  0
raid456               180224  0
async_raid6_recov      24576  1 raid456
async_memcpy           20480  2 raid456,async_raid6_recov
async_pq               20480  2 raid456,async_raid6_recov
async_xor              20480  3 async_pq,raid456,async_raid6_recov
async_tx               20480  5 async_pq,async_memcpy,async_xor,raid456,async_raid6_recov
xor                    24576  2 async_xor,btrfs
hid_logitech_dj        28672  0
raid6_pq              122880  4 async_pq,btrfs,raid456,async_raid6_recov
libcrc32c              16384  2 btrfs,raid456
crc32c_generic         16384  0
raid1                  53248  0
raid0                  24576  0
multipath              20480  0
linear                 20480  0
md_mod                180224  6 raid1,raid10,raid0,linear,raid456,multipath
vmd                    16384  0
hid_generic            16384  0
usbhid                 65536  1 hid_logitech_dj
hid                   147456  5 hid_elecom,usbhid,hid_generic,hid_logitech_dj,hid_logitech_hidpp
i915                 2715648  61
i2c_algo_bit           16384  1 i915
sr_mod                 28672  0
crc32_pclmul           16384  0
drm_kms_helper        278528  1 i915
cdrom                  73728  1 sr_mod
crc32c_intel           24576  7
sd_mod                 61440  2
cec                    61440  2 drm_kms_helper,i915
ghash_clmulni_intel    16384  0
nvme                   49152  4
aesni_intel           368640  4
libaes                 16384  2 bluetooth,aesni_intel
xhci_pci               20480  0
crypto_simd            16384  1 aesni_intel
mxm_wmi                16384  0
xhci_hcd              303104  1 xhci_pci
drm                   618496  24 drm_kms_helper,i915
e1000e                303104  0
ahci                   40960  1
libahci                45056  1 ahci
nvme_core             126976  6 nvme
usbcore               323584  4 xhci_hcd,usbhid,btusb,xhci_pci
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel
t10_pi                 16384  2 sd_mod,nvme_core
glue_helper            16384  1 aesni_intel
crc_t10dif             20480  1 t10_pi
libata                294912  2 libahci,ahci
crct10dif_generic      16384  0
usb_common             16384  2 xhci_hcd,usbcore
ptp                    32768  1 e1000e
pps_core               24576  1 ptp
i2c_i801               32768  0
scsi_mod              262144  4 sd_mod,libata,sg,sr_mod
i2c_smbus              20480  1 i2c_i801
crct10dif_pclmul       16384  1
crct10dif_common       16384  3 crct10dif_generic,crc_t10dif,crct10dif_pclmul
fan                    20480  0
wmi                    36864  3 asus_wmi,wmi_bmof,mxm_wmi
video                  57344  2 asus_wmi,i915
button                 24576  0
xxxxxxx@mx:~
$

pactl list cards

Code: Select all

xxxxxxx@mx:~
$ pactl list cards
Card #0
        Name: alsa_card.pci-0000_00_1f.3
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7340000 irq 144"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1f.3"
                sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "a2f0"
                device.product.name = "200 Series PCH HD Audio"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
                output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
                output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: no)
                output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
                output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
                output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
                analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "video-display"
                                device.product.name = "ASUS VA229"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3, output:hdmi-surround71-extra3+input:analog-stereo
xxxxxxx@mx:~
$

WinDevMgr_20220708.jpg

Posted: **Fri Jul 08, 2022 6:36 am**

You can install 5.17 kernel from "Popular Apps" tab in "MX Package Installer" with 2 clicks.

... Even 5.18 from "Debian Backports" tab:

Type 5.18 in the search bar, select both:

linux-headers-5.18.... ......
linux-image-5.18... ......

click install.
__________________________________________________

If you hadn't: Disable "Fast Startup" in Windows.

Posted: **Fri Jul 08, 2022 9:31 pm**

Huckleberry Finn wrote: Fri Jul 08, 2022 6:36 am You can install 5.17 kernel from "Popular Apps" tab in "MX Package Installer" with 2 clicks.

... Even 5.18 from "Debian Backports" tab:

Type 5.18 in the search bar, select both:

linux-headers-5.18.... ......
linux-image-5.18... ......

click install.
__________________________________________________

If you hadn't: Disable "Fast Startup" in Windows.

I installed kernel 5.17 from the Popular Apps repository. That did not fix the problem. Still no sound on Line Out (green port on the back of the PC) to my monitor's built-in speakers.

To aide in troubleshooting, I booted to Live USBs of three other distros, and found the same problem. I then plugged in an old set of amplified speakers that I no longer use in place of the monitor speakers and have working sound. For some reason the output of that port is lower volume with Linux than with Windows (the monitor's speakers only require 1.5 watts). The monitor's built-in speakers work OK for notification sounds and other stuff with Windows, but there is no volume Linux. I have no need for the high-volume from those old speakers, but I do need the same level from the monitor built-in speakers that I have with Windows.

Is there a possibility that Linux is driving that port at a power level that would be lower than Windows drives it? Or that the wrong driver is loaded. The driver in use is snd_hda_intel as shown in QSI, but as I mentioned in my first post on this topic, the sound chip may be a "Realtek ALC1220A" instead of an Intel 200 chip. QSI IDs it as "Intel 200 Series PCH HD Audio" instead of Realtek. Note that the Asus ROG Strix motherboard is able to provide 8-channel surround sound via 5 ports on the back, and high definition headphone audio to the front port.

Asus_ROG_STRIX_B365-F_Back-Panel.jpg

Posted: **Sat Jul 09, 2022 5:21 am**

DMLinux wrote: Fri Jul 08, 2022 9:31 pm... as I mentioned in my first post on this topic, the sound chip may be a "Realtek ALC1220A" instead of an Intel 200 chip. QSI IDs it as "Intel 200 Series PCH HD Audio" instead of Realtek...

Alsamixer from menu : Top-left corner :)

Posted: **Mon Jul 11, 2022 10:49 pm**

Huckleberry Finn wrote: Sat Jul 09, 2022 5:21 am
DMLinux wrote: Fri Jul 08, 2022 9:31 pm... as I mentioned in my first post on this topic, the sound chip may be a "Realtek ALC1220A" instead of an Intel 200 chip. QSI IDs it as "Intel 200 Series PCH HD Audio" instead of Realtek...
Alsamixer from menu : Top-left corner :)

This is what Alsamixer shows:

Code: Select all

┌─────────────────────────────────── AlsaMixer v1.2.4 ────────────────────────────────────┐
│ Card: HDA Intel PCH                                             F1:  Help               │
│ Chip: Realtek ALC1220                                           F2:  System information │
│ View: F3:[Playback] F4: Capture  F5: All                        F6:  Select sound card  │
│ Item: Master [dB gain: 0.00]                                    Esc: Exit               │
│                                                                                         │
│                                                                                         │
│      ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐       │
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       │
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       │
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       →
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       │
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       │
│      │▒▒│     │  │     │▒▒│     │▒▒│     │  │     │  │     │▒▒│     │▒▒│     │▒▒│       │
│      ├──┤     ├──┤     └──┘     ├──┤     ├──┤     └──┘     ├──┤     ├──┤     ├──┤       │
│      │OO│     │MM│              │OO│     │MM│              │OO│     │OO│     │OO│       │
│      └──┘     └──┘              └──┘     └──┘              └──┘     └──┘     └──┘       │
│      100      0<>0   100<>100 100<>100   0<>0     0<>0   100<>100   100      100        │
│   < Master >Headphon   PCM     Front   Front Mi Front Mi Surround  Center    LFE        │
│                                                                                         │
└─────────────────────────────────────────────────────────────────────────────────────────┘

Posted: **Tue Jul 12, 2022 4:07 pm**

The driver etc. are ok (correct).

Press F6 and select 0 HDA Intel .. then press F5 "All" ..

Then (as you might already know) you can unmute (also mute) items with the M key from keyboard (those showing MM are muted btw)..

Any item may be even at max. value and may still be muted.

Even when everything looks "not muted", if you see "Auto-Mute Mode" just disable it. By default it shows "enabled", just use the up/down arrow keys and turn it to disabled.

If you haven't already done: Disable "Fast Startup" in Windows. (As it keeps devices engaged for it's not a real shutdown).

If still not:

Code: Select all

echo 'blacklist snd_hda_codec_realtek' | sudo tee /etc/modprobe.d/sound.conf

Reboot.

In case it doesn't work or causes any issues you can remove it:

Code: Select all

sudo rm /etc/modprobe.d/sound.conf

Posted: **Tue Jul 12, 2022 7:51 pm**

Huckleberry Finn wrote: Tue Jul 12, 2022 4:07 pm The driver etc. are ok (correct).

Press F6 and select 0 HDA Intel .. then press F5 "All" ..

Then (as you might already know) you can unmute (also mute) items with the M key from keyboard (those showing MM are muted btw)..

Any item may be even at max. value and may still be muted.

Even when everything looks "not muted", if you see "Auto-Mute Mode" just disable it. By default it shows "enabled", just use the up/down arrow keys and turn it to disabled.

If you haven't already done: Disable "Fast Startup" in Windows. (As it keeps devices engaged for it's not a real shutdown).

If still not:
Code: Select all
echo 'blacklist snd_hda_codec_realtek' | sudo tee /etc/modprobe.d/sound.conf
Reboot.

In case it doesn't work or causes any issues you can remove it:
Code: Select all
sudo rm /etc/modprobe.d/sound.conf

I have NOT YET done anything you have suggested in this post because I am now wondering if I am troubleshooting the wrong thing and/or describing the problem wrong. I THINK maybe the problem is that Linux does not see the monitor' non-powered speakers as an "output device". I checked the Asus VA229HR https://www.asus.com/us/Displays-Deskto ... e/VA229HR/ web page for drivers after remembering that Win10 lists it by name on the volume control and in Device Manager. Asus does not supply *ANY* drivers for the monitor. PulseAudio sees the Line Out as "Connected" but (I am guessing here) does not see the actual device that is connected. If I disconnect the monitor's speakers and plug in a set of powered speakers, I have good sound without making and changes to AlsaMixer or the PulseAudio Volume Control app. If I disconnect the powered speakers and reconnect the monitor speakers, I hear nothing. The monitor speakers work correctly in Windows 10. If I connect headphones to the front port on the PC, they work correctly. The digital SPDIF Optical port on the back also works correctly. What I need to fix is having no sound through the monitor's built in speakers. The first image below shows what Win10 sees and the second image shows what MX 21 sees. MX appears to know that SOMETHIING is plugged in, but is not making the plugged in speakers work when the monitor's non-powered built in speakers are what is plugged in. Also, when using headphones, I have to set the taskbar volume control at 100% to get the same volume level that I get with about 70% in Windows.

Win10-audio-output-devs.jpg

PulseAudio_20220712.jpg

Posted: **Tue Jul 12, 2022 8:23 pm**

Have you looked at the settings in 'PulseAudio Volume Control'?

Edit
Checking email and when I came back I hit the Submit button.
Did you check the Configuration tab and the Playback tab?

Posted: **Tue Jul 12, 2022 9:03 pm**

towwire wrote: Tue Jul 12, 2022 8:23 pm Have you looked at the settings in 'PulseAudio Volume Control'?

Edit
Checking email and when I came back I hit the Submit button.
Did you check the Configuration tab and the Playback tab?

Yes. I have tried all of the Configuration tab options for Analog output. Most are tagged as "(unavailable)".

PulseAudioConfigMenu_20220712.jpg

Posted: **Tue Jul 12, 2022 10:13 pm**

You show your 'Monitor-1: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6").

You are dual booting with Windows. You show "ASUS VA229(Intel(R) Display Audio). I don't know if that is your analog-stereo connection or if Windows is using the sound thru HDMI, not analog-stereo?
The only way that I can think is to boot into Windows and while playing some sound is to disconnect your analog connection. If sound still plays then the sound is coming thru your HDMI connection.

By what you posted you have:

Code: Select all

output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)

plus

Code: Select all

hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "video-display"
                                device.product.name = "ASUS VA229"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo

You can change Configuration tab options, enable HDMI instead of analog to test on MX.

Posted: **Tue Jul 12, 2022 10:20 pm**

Forgot, I think there are sound setting in your monitor to adjust analog sound. You might want to look at that first before anything else.

Posted: **Tue Jul 12, 2022 10:50 pm**

towwire wrote: Tue Jul 12, 2022 10:13 pm You show your 'Monitor-1: HDMI-2 res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.7x10.6").

You are dual booting with Windows. You show "ASUS VA229(Intel(R) Display Audio). I don't know if that is your analog-stereo connection or if Windows is using the sound thru HDMI, not analog-stereo?
The only way that I can think is to boot into Windows and while playing some sound is to disconnect your analog connection. If sound still plays then the sound is coming thru your HDMI connection.

By what you posted you have:
Code: Select all
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
plus
Code: Select all
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "video-display"
                                device.product.name = "ASUS VA229"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo
You can change Configuration tab options, enable HDMI instead of analog to test on MX.

Oops! Sorry for not being properly specific. I am using a standard 1/8 inch stereo audio cable for the speakers. This monitor does not support HDMI audio.

Posted: **Tue Jul 12, 2022 11:17 pm**

I understood what cable you are using.

Well I was going by this Asus VA-229 monitor. I downloaded the manual from here.
https://dlcdnets.asus.com/pub/ASUS/LCD% ... 80603A.pdf

From the manual. Chapter 3: General Instruction.
• Volume: Adjusts the output volume level.
• Mute: Mute: the output volume.
• Source: Adjusts audio source to “Line In” or “HDMI” (only available for HDMI input).

I would still check the monitor setting to up the volume if nothing else.
I have an ASUS_VG279Q1A but mine only has a headset jack coming thru the HDMI sound.

Posted: **Wed Jul 13, 2022 7:34 pm**

towwire wrote: Tue Jul 12, 2022 11:17 pm I understood what cable you are using.

Well I was going by this Asus VA-229 monitor. I downloaded the manual from here.
https://dlcdnets.asus.com/pub/ASUS/LCD% ... 80603A.pdf

From the manual. Chapter 3: General Instruction.
• Volume: Adjusts the output volume level.
• Mute: Mute: the output volume.
• Source: Adjusts audio source to “Line In” or “HDMI” (only available for HDMI input).
I would still check the monitor setting to up the volume if nothing else.
I have an ASUS_VG279Q1A but mine only has a headset jack coming thru the HDMI sound.

Thanks for your many replies, @tomwire. I have the monitor's volume full up. Like I said, it works fine with Windows without changing anything, just rebooting for MX to Win10. After trying a set of powered speakers a couple times, I think I finally understand the problem, but I want to do one more thing to be sure. I am going to sacrifice a spare 1/8 inch stereo cable so that I can check the output power with a multimeter. I know that can be done if the meter has the right range available. I just don't remember how, so I need to dig through some really old manuals to find that information..I am guessing the output level will be lower with Linux that with Win10. I know that sounds weird, but, since I get enough output power for the monitor's speakers to work with Win10, that tells me that there SHOULD be enough power for the speakers to work with Linux. The easy fix would be to just buy an elcheapo set of speakers at Walmart, but this issue has me irritated enough to keep going and do it the hard way because I want to know WHY this is happening.

I am probably the first person ever to want to use built-in monitor speakers with this particular motherboard, because this motherboard has exceptionally high quality sound. In addition to the surround-sound output on the back of the PC, it also has high resolution sound through the headphone jack on the front. I use a set oh Massdrop/Sennheiser HD-6XX headphones for music listening. I just need the speakers to work so that I can hear calendar alarms and other notification sounds,

Posted: **Sat Jul 16, 2022 12:22 am**

I found this: https://medium.com/@gamunu/enable-high- ... 16f3fe7e1f and ran

Code: Select all

lscpu | grep 'Byte Order'

which told me that I needed to change line #81 in /etc/pulse/daemon.conf from
"default-sample-format = s16le" to "default-sample-format = float32le". I have working sound from all 3 outputs now.

WorkingSound_20220715.jpg

MX Linux Forum

No sound on Line Out - MX 21.1 KDE

No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE

Re: No sound on Line Out - MX 21.1 KDE [Solved]