Re: Installation of proprietary NVIDIA Quadro NVS 110M GeForce Go 7300
Posted: Sat May 29, 2021 2:05 pm
Code: Select all
Snapshot created on: 20200915_1434
System: Host: <filter> Kernel: 4.19.0-9-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: quiet nosplash
Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: N/A
Distro: MX-19.4_x64 patito feo May 31 2020 base: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: ASUSTeK product: F3JC v: 1.0 serial: <filter> Chassis: type: 10
serial: N/A
Mobo: ASUSTeK model: F3JC v: 1.0 serial: <filter> BIOS: American Megatrends v: 305
date: 02/15/2007
Battery: ID-1: BAT0 charge: 1.7 Wh condition: 1.8/50.6 Wh (4%) volts: 12.4/11.1
model: ASUSTEK F3---24 type: Li-ion serial: <filter> status: Unknown
CPU: Topology: Dual Core model: Intel Core2 T5500 bits: 64 type: MCP arch: Core Merom
family: 6 model-id: F (15) stepping: 6 microcode: D1 L1 cache: 64 KiB
L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 6649
Speed: 997 MHz min/max: 996/1660 MHz Core speeds (MHz): 1: 997 2: 997
Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA G72M [Quadro NVS 110M/GeForce Go 7300] vendor: ASUSTeK
driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:01d7
Display: server: X.Org 1.20.4 driver: nouveau unloaded: fbdev,modesetting,vesa
alternate: nv resolution: 1280x800~60Hz
OpenGL: renderer: NV46 v: 2.1 Mesa 18.3.6 direct render: Yes
Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8
Sound Server: ALSA v: k4.19.0-9-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK
driver: r8169 v: kernel port: c800 bus ID: 02:00.0 chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s
port: c800 bus ID: 03:00.0 chip ID: 8086:4222
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 116.93 GiB used: 13.90 GiB (11.9%)
ID-1: /dev/sda vendor: SanDisk model: SDSSDP064G size: 59.63 GiB block size:
physical: 512 B logical: 512 B speed: <unknown> serial: <filter> scheme: MBR
ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra USB 3.0 size: 57.30 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR
Partition: ID-1: / raw size: 57.59 GiB size: 56.44 GiB (98.00%) used: 13.90 GiB (24.6%) fs: ext4
block size: 4096 B dev: /dev/sda1
ID-2: swap-1 size: 2.00 GiB used: 1.2 MiB (0.1%) fs: swap swappiness: 15 (default 60)
cache pressure: 100 (default) dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.0 C mobo: N/A gpu: nouveau temp: 49 C
Fan Speeds (RPM): N/A
Repos: No active apt repos in: /etc/apt/sources.list
Info: Processes: 198 Uptime: 14m Memory: 1.95 GiB used: 926.8 MiB (46.5%) Init: SysVinit
v: 2.93 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in (sudo)
running in: quick-system-in inxi: 3.0.36