antiX-19 runit release

[manyroads]

antiX-19 base version (sort of), but with runit as the init system and not SysVinit.
Ok – quick announcement – will add more later (tomorrow).
* based on antiX-base version

Cool!
I'm from the noob side, so I will wait for a little bit more beefed up version, base may just be over my head for now. But looking forward to play with antiX runit version. I liked it on Void, but I was too noob to keep it is daily driver. Which is good since I found you guys

@manyroads, any chance to slap Xfce on it? Would your steps from 19 beta work on this one?

My guess is that the init will have little to do with installing xfce. The same steps should work or you can install from the antiX package manager... which is now much easier and seems to work although last time I tried I got version 4.12 not 4.14.

[oops]

...
My guess is that the init will have little to do with installing xfce. The same steps should work or you can install from the antiX package manager... which is now much easier and seems to work although last time I tried I got version 4.12 not 4.14.

... and with antiX, I always install lightdm instead slim (for a multi-users behavior, Ctrl+Alt+F7, Ctrl+Alt+F8, Ctrl+Alt+Fn ).

[manyroads]

Sadly, when I attempt to load antiX-runit I am unable to get a live desktop. I simply arrive at cli-installer in terminal mode.

Here are the particulars on the machine I used:

Code: Select all

$ inxi -F
System:
  Host: mark-arco Kernel: 5.4.2-arch1-1 x86_64 bits: 64 Desktop: Xfce 4.14.1 
  Distro: Arch Linux 
Machine:
  Type: Laptop System: Dell product: Inspiron 5493 v: N/A 
  serial: <root required> 
  Mobo: Dell model: 0M4FW1 v: A00 serial: <root required> UEFI: Dell 
  v: 1.3.0 date: 10/24/2019 
Battery:
  ID-1: BAT0 charge: 39.9 Wh condition: 39.9/42.0 Wh (95%) 
CPU:
  Topology: Quad Core model: Intel Core i5-1035G1 bits: 64 type: MT MCP 
  L2 cache: 6144 KiB 
  Speed: 2100 MHz min/max: 400/3600 MHz Core speeds (MHz): 1: 2100 2: 2059 
  3: 1715 4: 1241 5: 2100 6: 2004 7: 1662 8: 2101 
Graphics:
  Device-1: Intel driver: i915 v: kernel 
  Display: x11 server: X.Org 1.20.6 driver: intel 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: Mesa DRI Intel HD Graphics (Ice Lake 4x8 GT1) 
  v: 4.5 Mesa 19.2.7 
Audio:
  Device-1: Intel Smart Sound Audio driver: snd_hda_intel 
  Sound Server: ALSA v: k5.4.2-arch1-1 
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 
  IF: enp1s0 state: down mac: 98:e7:43:25:dc:44 
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter 
  driver: ath10k_pci 
  IF: wlp2s0 state: up mac: 40:23:43:e8:b8:ab 
  Device-3: Qualcomm Atheros type: USB driver: btusb 
Drives:
  Local Storage: total: 953.87 GiB used: 470.43 GiB (49.3%) 
  ID-1: /dev/nvme0n1 vendor: Silicon Power model: SPCC M.2 PCIe SSD 
  size: 953.87 GiB 
Partition:
  ID-1: / size: 37.22 GiB used: 16.67 GiB (44.8%) fs: ext4 
  dev: /dev/nvme0n1p5 
  ID-2: swap-1 size: 9.15 GiB used: 0 KiB (0.0%) fs: swap 
  dev: /dev/nvme0n1p4 
Sensors:
  System Temperatures: cpu: 79.0 C mobo: N/A 
  Fan Speeds (RPM): cpu: 3903 
Info:
  Processes: 217 Uptime: 2m Memory: 23.27 GiB used: 1.39 GiB (6.0%) 
  Shell: bash inxi: 3.0.36 

[Eadwine Rose]

Same here.. I was about to open a topic on it. The "standard" antixes also don't get there. If I enter startx I get a load of xorg stuff on the screen.

Going to try the xorg=nuke option now.. failsafe didn't get me anywhere either.

[Buck Fankers]

I only tried so far version posted by HoaS and only live session (off the USB stick) is not loading startx. Installed one does start it

[Eadwine Rose]

Thing is I am not installing unless I have a GUI.. I have too many drives to fiddlestick with and I do not want to risk selecting the wrong one.

Removed splasht, added xorg=nuke, nope. (note that that was on antix-full _x64, but I am very sure that runit will do the same).
Of course md5sums were checked and all.

Code: Select all

System:    Host: eadwineMX19 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 
           root=UUID=c7f614c9-c448-4560-93c2-9e9748b4ae8f ro quiet 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19_x64 patito feo October 21  2019 base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop Mobo: ASUSTeK model: TUF B450-PLUS GAMING v: Rev X.0x serial: <filter> 
           UEFI: American Megatrends v: 1607 date: 06/17/2019 
Battery:   Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball 
           serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
           status: Discharging 
CPU:       Topology: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ 
           family: 17 (23) model-id: 8 stepping: 2 microcode: 800820C L2 cache: 4096 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
           bogomips: 102207 
           Speed: 1942 MHz min/max: 1550/3200 MHz boost: enabled Core speeds (MHz): 1: 1475 
           2: 1425 3: 1438 4: 1546 5: 1547 6: 1545 7: 1547 8: 1547 9: 1481 10: 1547 11: 1546 
           12: 1547 13: 1547 14: 1547 15: 1458 16: 1423 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Full AMD retpoline, IBPB: conditional, STIBP: disabled, RSB filling 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: ASUSTeK driver: nvidia v: 418.74 
           bus ID: 08:00.0 chip ID: 10de:1c82 
           Display: x11 server: X.Org 1.20.4 driver: nvidia 
           unloaded: fbdev,modesetting,nouveau,vesa alternate: nv 
           resolution: 1920x1080~60Hz, 1920x1080~60Hz 
           OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 418.74 
           direct render: Yes 
Audio:     Device-1: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D 
           Comb 
           vendor: Hauppauge works driver: cx23885 v: 0.0.4 bus ID: 07:00.0 chip ID: 14f1:8880 
           Device-2: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK driver: snd_hda_intel 
           v: kernel bus ID: 08:00.1 chip ID: 10de:0fb9 
           Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 0a:00.3 chip ID: 1022:1457 
           Device-4: Logitech QuickCam E 3500 type: USB driver: snd-usb-audio,uvcvideo 
           bus ID: 1-7:4 chip ID: 046d:09a4 serial: <filter> 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
           driver: r8169 v: kernel port: f000 bus ID: 03:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u bus ID: 1-1:2 
           chip ID: 148f:7601 serial: <filter> 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 1.83 TiB used: 116.96 GiB (6.2%) 
           ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 2B6Q scheme: GPT 
           ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 2B6Q scheme: GPT 
           ID-3: /dev/sdc vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 3B6Q scheme: GPT 
           ID-4: /dev/sdd type: USB vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B rotation: 5400 rpm serial: <filter> 
           rev: 0109 scheme: MBR 
           ID-5: /dev/sde vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 3B6Q scheme: MBR 
           ID-6: /dev/sdf type: USB model: USB DISK 2.0 size: 14.93 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR 
Partition: ID-1: / raw size: 58.59 GiB size: 57.42 GiB (98.00%) used: 9.44 GiB (16.4%) fs: ext4 
           dev: /dev/sdc1 
           ID-2: /home raw size: 166.48 GiB size: 162.87 GiB (97.83%) used: 41.67 GiB (25.6%) 
           fs: ext4 dev: /dev/sdc3 
           ID-3: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sdc2 
Sensors:   System Temperatures: cpu: 36.2 C mobo: 26.0 C gpu: nvidia temp: 34 C 
           Fan Speeds (RPM): cpu: 538 fan-2: 794 fan-3: 0 fan-4: 751 fan-6: 0 gpu: nvidia 
           fan: 25% 
           Voltages: 12v: N/A 5v: N/A 3.3v: 3.36 vbat: 3.27 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster/ buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/keeper.list 
           1: deb [arch=amd64] https://keepersecurity.com/desktop_electron/Linux/repo/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/megasync.list 
           1: deb https://mega.nz/linux/MEGAsync/Debian_10.0/ ./
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/slack.list 
           1: deb https://packagecloud.io/slacktechnologies/slack/debian/ jessie main
           No active apt repos in: /etc/apt/sources.list.d/slacktechnologies_slack.list 
           Active apt repos in: /etc/apt/sources.list.d/spotify.list 
           1: deb http://repository.spotify.com/ stable non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 396 Uptime: 2m Memory: 31.41 GiB used: 2.21 GiB (7.0%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36 

[oops]

... Maybe due to this issue ?:

...If you find on installation that no drives are shown in /media, then delete the /etc/fstab file and type this in a terminal
sudo make-fstab

see here:
https://www.antixforum.com/forums/topic ... t-release/

[Head_on_a_Stick]

Code: Select all

  OpenGL: renderer: Mesa DRI Intel HD Graphics (Ice Lake 4x8 GT1) 

10th generation Intel isn't well supported (if at all) under Debian buster, you could perhaps try the new AHS repository (if that works with antiX) for a newer kernel & graphics stack.

[manyroads]

Code: Select all

  OpenGL: renderer: Mesa DRI Intel HD Graphics (Ice Lake 4x8 GT1) 

10th generation Intel isn't well supported (if at all) under Debian buster, you could perhaps try the new AHS repository (if that works with antiX) for a newer kernel & graphics stack.

Well that explains why I can't run MX or antiX on my new toy...

Edit: Funny that Linux Mint does....

[Eadwine Rose]

Runit now. Made a screenshot, this was using failsafe, no other parameters were added:

IMG_0479.jpg

Drives are present. I can see all the partitions in /media, so that is not it.
Note that I do not have mx17 installed on the system lol just renamed the partitions as such.