2nd Screen weirdness

[AltairIV]

Code: Select all

System:
  Kernel: 6.1.0-37-amd64 [6.1.140-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.6_x64 Libretto April 13  2025 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Notebook product: P17SM-A v: N/A serial: <superuser required>
  Mobo: Notebook model: P17SM-A serial: <superuser required> BIOS: American Megatrends v: 4.6.5
    date: 09/12/2014
CPU:
  Info: model: Intel Core i7-4710MQ bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1147 high: 1356 min/max: 800/3500 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1072 2: 1066 3: 1356 4: 1309 5: 1021 6: 900 7: 1322 8: 1135
    bogomips: 39907
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: CLEVO/KAPOK driver: i915
    v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: DP-2,HDMI-A-2 off: eDP-1
    empty: DP-1,HDMI-A-1,HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:0416 class-ID: 0300
  Device-2: NVIDIA GM204M [GeForce GTX 960 OEM / 970M] vendor: CLEVO/KAPOK driver: nvidia
    v: 535.247.01 non-free: 530.xx+ status: current (as of 2023-03) arch: Maxwell code: GMxxx
    process: TSMC 28nm built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
    speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:13d8 class-ID: 0300
  Device-3: Bison BisonCam NB Pro type: USB driver: uvcvideo bus-ID: 2-10:6 chip-ID: 5986:055c
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa alternate: nv dri: crocus gpu: i915
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 3840x2124 s-dpi: 96 s-size: 1017x562mm (40.04x22.13")
    s-diag: 1162mm (45.75")
  Monitor-1: DP-2 pos: primary,bottom-l model: Dell P2225H serial: <filter> built: 2025
    res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 size: 476x268mm (18.74x10.55") diag: 546mm (21.5")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: top-right model: Sony TV 00 serial: <filter>
    built: 2015 res: 1920x1080 hz: 60 dpi: 40 gamma: 1.2 size: 1218x685mm (47.95x26.97")
    diag: 1397mm (55") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  Monitor-3: eDP-1 note: disabled model: AU Optronics 0x149d built: 2009 res: 1920x1080 dpi: 128
    gamma: 1.2 size: 381x214mm (15x8.43") diag: 437mm (17.2") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: CLEVO/KAPOK
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: CLEVO/KAPOK 8
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
  Device-3: NVIDIA GM204 High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:0fbb
    class-ID: 0403
  API: ALSA v: k6.1.0-37-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: CLEVO/KAPOK
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 05:00.2
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:08b1 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 2-4:4
    chip-ID: 8087:07dc class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: e00 hci-v: 4.0 rev: e00
  Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 1.82 TiB used: 15.79 GiB (0.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 3B6Q scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 840 EVO 1TB size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: BB6Q
    scheme: MBR
Partition:
  ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%) used: 15.79 GiB (1.7%) fs: ext4
    dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 39.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2347 pm: dpkg pkgs: 2346 libs: 1226 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 1
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.datamossa.io/mxlinux/mx/repo/ bookworm main non-free
Info:
  Processes: 250 Uptime: 6m wakeups: 2 Memory: 15.54 GiB used: 1.92 GiB (12.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

[Eadwine Rose]

@AltairIV

What is going on, we cannot mind read.

[AltairIV]

@AltairIV

What is going on, we cannot mind read.

That's the second time you have been rude to me, please stop it.
I had an issue which needed a re-boot so I couldn't post the explanation I was writing for the second post. 7 minutes.

[rokytnji.1]

She asked Legit question. It is you being rude.

[Eadwine Rose]

Posting just a QSI is lacking, and I don't know that you are going to edit or something. If you think me telling you that I cannot mind read is rude, then that is not a me problem, because I was just stating a fact. Again with the editing being done. I cannot possibly know that.

[rokytnji.1]

Might wanna look in sudo dmesg for failure reason.

[siamhie]

I had an issue which needed a re-boot so I couldn't post the explanation I was writing for the second post. 7 minutes.

Post the issue you are having with your second screen please.

[AltairIV]

Posting just a QSI is lacking, and I don't know that you are going to edit or something. If you think me telling you that I cannot mind read is rude, then that is not a me problem, because I was just stating a fact. Again with the editing being done. I cannot possibly know that.

You waited a total of about 5 minutes before implying that I was expecting mind reading. It WAS rude and impatient.
Yesterday you accused me of not having read the rules as the reason I hadn't posted the QSI....I simply forgot, today I posted the QSI in line with your expectations and had intended to post an immediate 2nd post but I wasn't fast enough for you.
Clearly you have a problem with me. Now apparently I am "lacking".
So you have so far accused me of not having read the rules, expecting others to be mind readers and that I am lacking.
And you think your approach isn't rude; wow.
Whatever you like to call it, your are hounding me...please stop it and give a person a break. Your role is not to bully people and you ARE bullying me.

[AltairIV]

She asked Legit question. It is you being rude.

Nonsense in every respect.

[Eadwine Rose]

You are getting the same treatment everyone else is getting here.

Please post about your problem now.