On my only install of MX-23 on a laptop, when I try to create a transparent panel using a transparent .png as a background, it leaves a visible line around the edges of the panel.
Anyone know how to remove that line?
My other MX installs (21.3) this doesn't happen using the same transparent .png as the background.
Changing the width or height of the panel makes no difference and it appears to be only along the panel's edges.
Creating a new .png makes no difference.
Thanks
Code: Select all
System:
Kernel: 6.1.0-37-amd64 [6.1.140-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-37-amd64 root=UUID=<filter> ro quiet nosplash
Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
dm: LightDM v: 1.32.0 Distro: MX-23.6_x64 Libretto October 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC
v: 0595100000244710000020100 serial: <superuser required> Chassis: type: 10
serial: <superuser required>
Mobo: Hewlett-Packard model: 1658 v: 10.31 serial: <superuser required> BIOS: Hewlett-Packard
v: F.1B date: 10/05/2011
Battery:
ID-1: BAT0 charge: 47.9 Wh (98.2%) condition: 48.8/48.8 Wh (100.0%) volts: 12.1 min: 11.1
model: Hewlett-Packard 4400 type: Unknown serial: <filter> status: charging
Device-1: hidpp_battery_0 model: Logitech M215 serial: <filter> charge: 55% (should be ignored)
rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i7-2630QM bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 799 high: 800 min/max: 800/2900 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 800 2: 800 3: 800 4: 800 5: 798 6: 800 7: 800 8: 800 bogomips: 31927
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-6 code: Sandybridge process: Intel 32nm built: 2011 ports:
active: LVDS-1 empty: DP-1,HDMI-A-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0116 class-ID: 0300
Device-2: Bison HP TrueVision HD Webcam type: USB driver: uvcvideo bus-ID: 1-1.2:4
chip-ID: 5986:02ac class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 362x204mm (14.25x8.03") s-diag: 416mm (16.36")
Monitor-1: LVDS-1 model: LG Display 0x02f2 built: 2010 res: 1366x768 hz: 60 dpi: 101 gamma: 1.2
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1366x768
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 3000 (SNB GT2)
direct-render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Hewlett-Packard 6
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
API: ALSA v: k6.1.0-37-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 4000 bus-ID: 01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Wireless-N 1000 [Condor Peak] driver: iwlwifi v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 8086:0084 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: HP Broadcom 2070 Bluetooth Combo type: USB driver: btusb v: 0.8 bus-ID: 2-1.6:4
chip-ID: 03f0:231d class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no
software: no address: <filter>
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch hold sniff park
link-mode: peripheral accept
Drives:
Local Storage: total: 1.36 TiB used: 78.23 GiB (5.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500LM000-1EJ162 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: DEM6 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Toshiba model: MQ04UBF100 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400 serial: <filter> scheme: MBR
Partition:
ID-1: / raw-size: 465.76 GiB size: 457.38 GiB (98.20%) used: 78.23 GiB (17.1%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2403 libs: 1269 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mx.debian.nz/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
Processes: 258 Uptime: 19m wakeups: 4 Memory: 7.7 GiB used: 927.1 MiB (11.8%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)