conkyt_sys_sm formatting issue

[CharlesV]

I just encountered an issue with this conky displaying the "status" line out of / on the conky frame. I thought it was my increased font size, however when dropped back to a stock LiveUSB it was still not 'in the frame"



Maybe it is supposed to be this way, but I think it is a bug.

Code: Select all

Snapshot created on: 20250410_1831
System:
  Kernel: 6.12.16-1-liquorix-amd64 [6.12-21~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable amd_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.12.16-1-liquorix-amd64
    root=UUID=<filter> ro quiet splash kvm.enable_virt_at_load=0
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel, cairo-dock wm: xfwm v: 4.20.0
    vt: 7 dm: LightDM v: 1.32.0 Distro: MX-23.6_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: HP product: HP Envy Laptop 17-cw0xxx v: Type1ProductConfigId
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 8BDD v: 70.33 serial: <superuser required> UEFI: Insyde v: F.05
    date: 08/29/2023
Battery:
  ID-1: BAT1 charge: 29.1 Wh (55.4%) condition: 52.5/55.7 Wh (94.3%) volts: 14.9 min: 15.0
    model: 333-17-4B-A SA04055XL type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: 13th Gen Intel Core i7-13700H bits: 64 type: MST AMCP arch: Raptor Lake gen: core 13
    level: v3 note: check built: 2022+ process: Intel 7 (10nm) family: 6 model-id: 0xBA (186)
    stepping: 2 microcode: 0x4124
  Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled cache: L1: 1.2 MiB
    desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB
    desc: 1x24 MiB
  Speed (MHz): avg: 633 high: 1500 min/max: 400/2901 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 674 2: 445 3: 400 4: 400 5: 630 6: 500 7: 762 8: 500 9: 400 10: 500
    11: 558 12: 500 13: 1500 14: 400 15: 400 16: 400 17: 1400 18: 1400 19: 500 20: 400
    bogomips: 116736
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling mitigation: Clear Register File
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
    PBRSB-eIBRS: SW sequence; BHI: BHI_DIS_S
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: Hewlett-Packard driver: i915 v: kernel
    alternate: xe arch: Gen-13 process: Intel 7 (10nm) built: 2022+ ports: active: eDP-1 empty: DP-1,
    DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:a7a0 class-ID: 0300
  Device-2: Luxvisions Innotech HP Wide Vision 5MP Camera type: USB
    driver: hid-sensor-hub,usbhid,uvcvideo bus-ID: 3-7:2 chip-ID: 30c9:00ab class-ID: fe01
    serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
  Monitor-1: eDP-1 model: BOE Display 0x0a9d built: 2021 res: 1920x1080 hz: 60 dpi: 128
    gamma: 1.2 size: 382x215mm (15.04x8.46") diag: 438mm (17.3") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel Graphics (RPL-P)
    direct-render: Yes
Audio:
  Device-1: Intel Raptor Lake-P/U/H cAVS vendor: Hewlett-Packard driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel, snd_soc_avs, snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca
    class-ID: 0401
  API: ALSA v: k6.12.16-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.4.1 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel modules: wl bus-ID: 00:14.3
    chip-ID: 8086:51f1 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IF-ID-1: ztwfug64bb state: unknown speed: 10000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 3-10:3 chip-ID: 8087:0033 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter>
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 953.87 GiB used: 261.53 GiB (27.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL41T0HBLB-00BH1 size: 953.87 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: HPS3NHAV temp: 28.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 491.73 GiB size: 482.94 GiB (98.21%) used: 261.53 GiB (54.2%) fs: ext4
    dev: /dev/nvme0n1p6 maj-min: 259:5
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 411 KiB (0.2%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 31.69 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p5 maj-min: 259:4
Sensors:
  System Temperatures: cpu: 53.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 0 fan-2: 0
Repos:
  Packages: pm: dpkg pkgs: 2802 libs: 1382 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
    1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://la.mxrepo.com/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main
  Active apt repos in: /etc/apt/sources.list.d/zerotier.list
    1: deb [signed-by=/usr/share/keyrings/zerotier-debian-package-key.gpg] http://download.zerotier.com/debian/bookworm bookworm main
Info:
  Processes: 439 Uptime: 1d 4h 34m wakeups: 22269 Memory: 15.34 GiB used: 4.61 GiB (30.1%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[Jerry3904]

For me on MXFB 23.6 with a 1920x1080 resolution it looks exactly like the image shown in CM--but that is not right in the first place, since the day and month are weirdly arranged.



You can change the size of the framing image in the code: click on the pencil icon to edit the text and scroll down to the section "-- locales dependent image size" where alternative sizes are given. Choose the one that fits your screen, and then change the template number in the code at the end.

[CharlesV]

I just verified 1920x1080 from a live usb (in a VM - maybe that is the difference ? )

[CharlesV]

I just verified 1920x1080 from a live usb (in a VM - maybe that is the difference ? )

Edit: Yup, I adjusted it on the computer that was running it, but I just wanted to call attention to the fact it does not appear properly on any of my machines. (modified fonts or not, installed or not - 3 different machines + the one I originally found this on.)

[siamhie]

I just encountered an issue with this conky displaying the "status" line out of / on the conky frame.

I get the same thing on my 1440 monitor. No modifications made to the conky.

Code: Select all

inxi -G
Graphics:
  Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
    driver: amdgpu v: kernel
  Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: amdgpu
    unloaded: fbdev dri: radeonsi gpu: amdgpu resolution: 2560x1440
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22
    LLVM 15.0.6 DRM 3.61 6.12.28-x64v3-xanmod1)

[siamhie]

@CharlesV I got it working. It requires the Loma font not included with the conky.

Code: Select all

${alignc}${voffset 25}  ${font Loma:size=75}${time %d}${font}

Here that font I downloaded.

loma-regular.zip

[CharlesV]

@CharlesV I got it working. It requires the Loma font not included with the conky.

Code: Select all

${alignc}${voffset 25}  ${font Loma:size=75}${time %d}${font}

Here that font I downloaded.
loma-regular.zip

Excellent! good job. So MX should probably put that Loma font on the default install?

[siamhie]

@CharlesV I got it working. It requires the Loma font not included with the conky.

Code: Select all

${alignc}${voffset 25}  ${font Loma:size=75}${time %d}${font}

Here that font I downloaded.
loma-regular.zip

Excellent! good job. So MX should probably put that Loma font on the default install?

It probably should be included. The conkyt_sm conky also calls for that font.

[i_ri]

hello siamhie
font. You nailed it. Loma.
more of your font magic with "Robot-Light" (?) (made me laugh)
Find fonts you like (that you have,)
siamhie is right, it has been falling back to mono everywhere.

[siamhie]

hello siamhie
font. You nailed it. Loma.
more of your font magic with "Robot-Light" (?) (made me laugh)
Find fonts you like (that you have,)
siamhie is right, it has been falling back to mono everywhere.

"Robot-Light"...That's probably a typo for Roboto.