Audio down

[rzaprianov]

I did everything, but alas nothing works through the mother boad sound card ... seems the audio card which is integrated on the MB is burned, so I ordered one internal Creative Sound Blaster 7.1 PCI and I really hope it will work normally but I will know that after Easter - means Wed evening.

[rzaprianov]

I got new card - Creative sound blaster audigy (SB0570) se. With the new Creative sound blaster audigy (SB0570) SE I see all profiles (the list is huge https://imgur.com/tDDzE0W.png), I made all changes in Alsamixer https://imgur.com/kys9SRk.png. But again no sound. I have one small old USB card - works! The sound is not very good, but at least works. With the USB card I have some sound. Integrated card if turned off from BIOS.

Code: Select all

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CA0106 [CA0106], device 0: ca0106 [CA0106]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: CA0106 [CA0106], device 1: ca0106 [CA0106]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: CA0106 [CA0106], device 2: ca0106 [CA0106]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: CA0106 [CA0106], device 3: ca0106 [CA0106]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: Device [USB Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

[j2mcgreg]

If you boot into a live session from a USB drive, is the SoundBlaster recognized and does it work?

[rzaprianov]

Got error https://i.imgur.com/V22VVUl.png Last time I try to run got the same error, but changed some settings and run, now I couldn't run it ... don't remember what I did last time to make it work.

[j2mcgreg]

Got error https://i.imgur.com/V22VVUl.png Last time I try to run got the same error, but changed some settings and run, now I couldn't run it ... don't remember what I did last time to make it work.

If you are not clear on what changes you have made or how to reverse them individually, your best course of action is to reinstall.

[rzaprianov]

No, I got that error starting from live USB, not the regular installation. The installation works 100% and there is no troubles. The live USB gave me that error.

[ghunter]

hmmm in post number 9.....I believe you are supposed to click on the configuration tab and choose your preferred output device from there.
Did you do that?

2) in the image for Ca0106....I see S/pdif

I have seen....in the past....some people need to turn off then on.....or turn on then off the s/pdif to get analog sound
I know you are going to say you are not connected to optical cable.....but this is what you may have done in the past ?

[j2mcgreg]

No, I got that error starting from live USB, not the regular installation. The installation works 100% and there is no troubles. The live USB gave me that error.

But your new SB card isn't working properly, so this statement isn't true, is it?

[rzaprianov]

Well, I couldn't test it under live USB as live USB didn't boot. And under the normal installation - yes doesn't work. I noticed that in the menu where I choose sound card in MX Select Sound If I choose Audigy next to "Your current sound card is" appear None. In the BIOS in PCI slots where it is the sound card in slot 6 appear "Audio".

[j2mcgreg]

Well, I couldn't test it under live USB as live USB didn't boot. And under the normal installation - yes doesn't work. I noticed that in the menu where I choose sound card in MX Select Sound If I choose Audigy next to "Your current sound card is" appear None. In the BIOS in PCI slots where it is the sound card in slot 6 appear "Audio".

I suggest that you use Repo Manager in MX Tools to switch your main repository to either Milan, Italy or Alblasserdam, The Netherlands.We own and operate both of these and there is the possibility that the ISO you originally downloaded was corrupt in some fashion which is why your USB drive won't boot. Using one of these two sites is the best guarantee I can give you that you will get a clean downloaded ISO.