perchè si crea "⁦/run/user/1000/doc/f6e11257/" ???

Forum italiano degli utenti MX
Message
Author
User avatar
asthara
Posts: 139
Joined: Fri Oct 28, 2022 12:17 pm

perchè si crea "⁦/run/user/1000/doc/f6e11257/" ???

#1 Post by asthara »

salve, come mai mi appare sempre questa path che mi crea fastidi....?

Code: Select all

System:
  Kernel: 6.1.0-33-amd64 [6.1.133-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-33-amd64 root=UUID=<filter> ro quiet splash
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.6_KDE_x64 Libretto
    April 13 2025 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP ProDesk 600 G1 SFF v: N/A
    serial: <superuser required> Chassis: type: 4 serial: <superuser required>
  Mobo: Hewlett-Packard model: 18E7 serial: <superuser required> UEFI: Hewlett-Packard
    v: L01 v02.57 date: 12/11/2014
CPU:
  Info: model: Intel Core i5-4570 bits: 64 type: MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
    L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 2256 high: 2395 min/max: 800/3600 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 2395 2: 2395 3: 2395 4: 1841 bogomips: 25543
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: disabled; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
    vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013
    ports: active: HDMI-A-1 empty: DP-1, DP-2, HDMI-A-2, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0412
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung SyncMaster serial: <filter> built: 2010
    res: 1920x1080 hz: 60 dpi: 81 gamma: 1.2 size: 604x342mm (23.78x13.46") diag: 694mm (27.3")
    ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Hewlett-Packard 8
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
  API: ALSA v: k6.1.0-33-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I217-LM vendor: Hewlett-Packard driver: e1000e v: kernel port: f080
    bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Realtek 802.11ac WLAN Adapter type: USB driver: rtl8852bu bus-ID: 1-7:2
    chip-ID: 0bda:b832 class-ID: 0000 serial: <filter>
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
    bus-ID: 1-12:4 chip-ID: 0a12:0001 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.0
    sub-v: 2312 hci-v: 5.0 rev: 810
  Info: acl-mtu: 679:8 sco-mtu: 48:16 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 1.36 TiB used: 982.96 GiB (70.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: DT01ACA100 size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
    scheme: MBR
Partition:
  ID-1: / raw-size: 150 GiB size: 146.59 GiB (97.72%) used: 59.67 GiB (40.7%) fs: ext4
    dev: /dev/sda6 maj-min: 8:6
  ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
    dev: /dev/sda4 maj-min: 8:4
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda5
    maj-min: 8:5
Sensors:
  System Temperatures: cpu: 38.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2841 pm: dpkg pkgs: 2795 libs: 1512 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
    pm: flatpak pkgs: 46
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/megasync.list
    1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_12/ ./
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://it.mxrepo.com/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
    1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Info:
  Processes: 230 Uptime: 18m wakeups: 1 Memory: 15.53 GiB used: 3.07 GiB (19.8%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

User avatar
Eadwine Rose
Administrator
Posts: 14462
Joined: Wed Jul 12, 2006 2:10 am

Re: perchè si crea "⁦/run/user/1000/doc/f6e11257/" ???

#2 Post by Eadwine Rose »

Quale percorso?

Se intendi il problema di cloudflare? Il forum è sotto attacco, questo deve essere fatto per evitare che il forum vada giù.
MX-23.6_x64 July 31 2023 * 6.1.0-34amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.216.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030

User avatar
j2mcgreg
Global Moderator
Posts: 6606
Joined: Tue Oct 23, 2007 12:04 pm

Re: perchè si crea "⁦/run/user/1000/doc/f6e11257/" ???

#3 Post by j2mcgreg »

Riguarda i flatpack. Per una spiegazione, vedi qui:
https://github.com/flatpak/flatpak/issues/3660
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.

Post Reply

Return to “Forum Italiano”