printer only works on Computer power up, not from Suspend  [Solved]

Forum rules
Post Reply
Message
Author
jonnken
Posts: 142
Joined: Thu Mar 14, 2019 12:22 pm

printer only works on Computer power up, not from Suspend

#1 Post by jonnken »

What is the fix when a printer only works when the computer is powered up from an OFF state, and the printer does not work when the computer is waken on from a suspend state?

Code: Select all

System:
  Kernel: 6.9.5-1-liquorix-amd64 [6.9-4~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.9.5-1-liquorix-amd64 root=UUID=<filter> ro
    quiet splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto January 21  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Dell product: OptiPlex 755 v: N/A serial: <superuser required> Chassis:
    type: 3 serial: <superuser required>
  Mobo: Dell model: 0DR845 serial: <superuser required> BIOS: Dell v: A22 date: 06/11/2012
CPU:
  Info: model: Intel Core2 Duo E8500 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0C
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 2577 high: 3159 min/max: N/A cores: 1: 1995 2: 3159 bogomips: 12636
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not
    affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Dell OptiPlex 755 driver: i915
    v: kernel arch: Gen-4 process: Intel 65n built: 2006-07 ports: active: VGA-1 empty: none
    bus-ID: 00:02.0 chip-ID: 8086:29b2 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: intel
    dri: i915 gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
  Monitor-1: VGA-1 mapped: VGA1 model: Dell P2422H serial: <filter> built: 2022 res: 1920x1080
    hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 2.1 Mesa 22.3.6 renderer: i915 (: Q35) direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Dell Optiplex 755 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k6.9.5-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82566DM-2 Gigabit Network vendor: Dell OptiPlex 755 driver: e1000e v: kernel
    port: ecc0 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24f3 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 3-1:2
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 326.73 GiB used: 38.41 GiB (11.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320413AS size: 298.09 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: JC47
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: USB Flash Drive size: 28.64 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 298.09 GiB size: 292.35 GiB (98.07%) used: 28.76 GiB (9.8%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2238 libs: 1141 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 275 Uptime: 36m wakeups: 1 Memory: 3.7 GiB used: 1.55 GiB (42.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Regards, jonnken...since Feb 2019
Dell Optiplex 7020...Intel i5-4690...500G HD...MX-23_x64
Top
jonnken
Posts: 142
Joined: Thu Mar 14, 2019 12:22 pm

Re: printer only works on Computer power up, not from Suspend  [Solved]

#2 Post by jonnken »

I notice when posting my system info....that the Kernel was the liquorix 6.9.5.1. I thought I had switch away from it some months ago for this older system. So I switched back to the Antix 4.19 kernel...and that seems to have fixed the problem.

Code: Select all

System:
  Kernel: 4.19.276-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.276-antix.1-amd64-smp root=UUID=<filter> ro quiet
    splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto January 21  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Dell product: OptiPlex 755 v: N/A serial: <superuser required> Chassis:
    type: 3 serial: <superuser required>
  Mobo: Dell model: 0DR845 serial: <superuser required> BIOS: Dell v: A22 date: 06/11/2012
CPU:
  Info: model: Intel Core2 Duo E8500 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0C
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 3091 high: 3100 min/max: N/A cores: 1: 3082 2: 3100 bogomips: 12635
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: Vulnerable
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Dell OptiPlex 755 driver: i915
    v: kernel arch: Gen-4 process: Intel 65n built: 2006-07 ports: active: VGA-1 empty: none
    bus-ID: 00:02.0 chip-ID: 8086:29b2 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: intel
    dri: i915 gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
  Monitor-1: VGA-1 mapped: VGA1 model: Dell P2422H serial: <filter> built: 2022 res: 1920x1080
    hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 2.1 Mesa 22.3.6 renderer: i915 (: Q35) direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Dell Optiplex 755 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k4.19.276-antix.1-amd64-smp status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82566DM-2 Gigabit Network vendor: Dell OptiPlex 755 driver: e1000e v: 3.2.6-k
    port: ecc0 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24f3 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 5-1:2
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 326.73 GiB used: 28.75 GiB (8.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320413AS size: 298.09 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: JC47
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: USB Flash Drive size: 28.64 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 298.09 GiB size: 292.35 GiB (98.07%) used: 28.75 GiB (9.8%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2238 libs: 1141 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 201 Uptime: 8m wakeups: 2 Memory: 3.71 GiB used: 1.45 GiB (39.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Regards, jonnken...since Feb 2019
Dell Optiplex 7020...Intel i5-4690...500G HD...MX-23_x64
Top
User avatar
chrispop99
Global Moderator
Posts: 3333
Joined: Tue Jan 27, 2009 2:07 pm

Re: printer only works on Computer power up, not from Suspend

#3 Post by chrispop99 »

I have two Wi-Fi network printers of different makes; after suspend, one of them always works, sometimes the other one disappears.

I usually just reboot, but have sometimes used the 'Print Settings' utility to add a printer, and the missing one can be found.

Chris
MX Facebook Group Administrator.
Home-built desktop - Core i5 9400, 970 EVO Plus, 8GB
DELL XPS 15
Lots of test machines
Top
Post Reply

Return to “Hardware /Configuration”