boot error

[bcreighton]

Think I may have messed up my main drive with a hard reset. This is a fairly new reinstall

Getting this at boot:
0.134147] ACPI Error: Needed type [Reference], found [Integer] (____ptrval__) (20228331/exresop-66) '
C @.134153] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Op
codeName unavailable] (28220331 /dswexec-431)
C @.134157] ACPI Error: Aborting method \_PR.CPU@._PDC due to previous error
(RE_AML_OPERAND_TYPE) (28228331/psparse-529)
[ 1.482684] DMAR: DRHD: handling fault status reg 2
{ 1.482688] DMAR: [DMA Read NO_PASID] Request device [01:00.01] fault addr 0x0
[fault reason 0x06] PTE Read access is not set
[ 1.555689] nouveau 6888:01:08.8: DRM: Pointer to LVDS manufacturer table invalid
Give root password for maintenance
(or press Control-D to continue):

I can press Control D, and everything loads, but think I'd better fix the problem before it manifests itself in worse ways.

I'm running on an old iMac:

Kernel: 6.1.0-30-amd64 [6.1.124-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto September 15 2024 base: Debian GNU/Linux 12
(bookworm)

iMac14,2 v: 1.0 date: 04/09/2018

Graphics:
Device-1: NVIDIA GK104M [GeForce GTX 775M Mac Edition] vendor: Apple driver: nouveau v: kernel
non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
process: TSMC 28nm built: 2012-18 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
speed: 8 GT/s ports: active: DP-1 empty: DP-2,DP-3 bus-ID: 01:00.0 chip-ID: 10de:119d
class-ID: 0300 temp: 48.0 C
Device-2: Apple FaceTime HD Camera (Built-in) type: USB driver: uvcvideo bus-ID: 1-7:5
chip-ID: 05ac:8511 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1

Any ideas how to fix this? My skills are basic, not my day job.

ANY help appreciated.

Barry

[Eadwine Rose]

Please post code like so:
[code]code output here[/code]


Also, FULL QSI please.

Thanks.

[bcreighton]

Reposting with Code:

Code: Select all

0.134147] ACPI Error: Needed type [Reference], found [Integer] (____ptrval__) (20228331/exresop-66) '
C @.134153] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Op
codeName unavailable] (28220331 /dswexec-431)
C @.134157] ACPI Error: Aborting method \_PR.CPU@._PDC due to previous error
(RE_AML_OPERAND_TYPE) (28228331/psparse-529)
[ 1.482684] DMAR: DRHD: handling fault status reg 2
{ 1.482688] DMAR: [DMA Read NO_PASID] Request device [01:00.01] fault addr 0x0
[fault reason 0x06] PTE Read access is not set
[ 1.555689] nouveau 6888:01:08.8: DRM: Pointer to LVDS manufacturer table invalid
Give root password for maintenance
(or press Control-D to continue):

Full QSI:

Code: Select all

Snapshot created on: 20250126_2309
System:
  Kernel: 6.1.0-30-amd64 [6.1.124-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto September 15  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Apple product: iMac14,2 v: 1.0 serial: <superuser required> Chassis:
    type: 13 v: Mac-27ADBB7B4CEE8E61 serial: <superuser required>
  Mobo: Apple model: Mac-27ADBB7B4CEE8E61 v: iMac14,2 serial: <superuser required> UEFI: Apple
    v: IM142.88Z.0130.B00.1804091831 date: 04/09/2018
Battery:
  Device-1: hidpp_battery_5 model: Logitech ERGO M575 Trackball serial: <filter> charge: 55%
    rechargeable: yes status: discharging
CPU:
  Info: model: Intel Core i7-4771 bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 3215 high: 3866 min/max: 800/3900 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 3492 2: 900 3: 3866 4: 3493 5: 3492 6: 3492 7: 3493 8: 3493
    bogomips: 55867
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GK104M [GeForce GTX 775M Mac Edition] vendor: Apple driver: nouveau v: kernel
    non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
    process: TSMC 28nm built: 2012-18 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
    speed: 8 GT/s ports: active: DP-1 empty: DP-2,DP-3 bus-ID: 01:00.0 chip-ID: 10de:119d
    class-ID: 0300 temp: 46.0 C
  Device-2: Apple FaceTime HD Camera (Built-in) type: USB driver: uvcvideo bus-ID: 1-7:5
    chip-ID: 05ac:8511 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 678x382mm (26.69x15.04") s-diag: 778mm (30.64")
  Monitor-1: DP-1 model: Apple iMac built: 2012 res: 2560x1440 hz: 60 dpi: 109 gamma: 1.2
    size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 1280x720
  API: OpenGL v: 4.3 Mesa 22.3.6 renderer: NVE4 direct-render: Yes
Audio:
  Device-1: Intel 8 Series/C220 Series High Definition Audio driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
  Device-2: NVIDIA GK104 HDMI Audio driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:0e0a class-ID: 0403
  API: ALSA v: k6.1.0-30-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: wl v: kernel
    modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 14e4:43a0
    class-ID: 0280
  IF: wlan0 state: down mac: <filter>
  Device-2: Broadcom NetXtreme BCM57766 Gigabit Ethernet PCIe driver: tg3 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 14e4:1686 class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8 bus-ID: 1-8.3:11
    chip-ID: 05ac:828d class-ID: fe01
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: 4176 hci-v: 4.0 rev: 23a3
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 946.42 GiB used: 701.12 GiB (74.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: HDD ST1000DM003 size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: AP19
    scheme: GPT
  ID-2: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk model: Cruzer Fit size: 14.91 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.26 scheme: GPT
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 27.94 GiB size: 27.33 GiB (97.83%) used: 15.98 GiB (58.5%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 903.32 GiB size: 888.07 GiB (98.31%) used: 678.81 GiB (76.4%) fs: ext4
    dev: /dev/sda3 maj-min: 8:3
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 3.3 MiB (0.1%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 48.0 C mobo: N/A gpu: nouveau temp: 46.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2918 libs: 1621 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.math.princeton.edu/pub/mxlinux/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources
    1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main
Info:
  Processes: 308 Uptime: 3h 53m wakeups: 17 Memory: 15.56 GiB used: 5.88 GiB (37.8%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[dolphin_oracle]

I think I would do a fsck on the root partition.

you can try adding this to your boot parameters

Code: Select all

fsck.mode=force

but you can also do the fsck from a live usb.

[bcreighton]

I'll try fsck from a usb and report back when I get the chance.

Thanks!

[bcreighton]

Tried fsck from a usb on sda's. No dice. Same error. Any other ideas?

[j2mcgreg]

Tried fsck from a usb on sda's. No dice. Same error. Any other ideas?

Based on the age of your CPU, your HDD is eleven years old and likely needs to be replaced.

[dolphin_oracle]

did you run the fsck on all your partitions?

[bcreighton]

CPU is fine. Hard drive... maybe getting a little up there, but it isn't throwing any errors. Other than that, the display is still gorgeous and it is a solid computer. No reason to throw it away, what a waste. It was working fine UNTIL installed the latest upgrade.

Yes, I ran fsck on sda1, sda2, and sda3. SDA2 and 3 were clean.

Anything else I can try?

[dolphin_oracle]

Maybe to check to see if all fstab entries are still valid.