$ thunar
(thunar:4634): GLib-GObject-WARNING **: 10:11:22.169: invalid cast from 'GFileIcon' to 'GThemedIcon'
(thunar:4634): GLib-GIO-CRITICAL **: 10:11:22.169: g_themed_icon_get_names: assertion 'G_IS_THEMED_ICON (icon)' failed
Segmentation fault
I've seen a few reports of this online, no solutions though as far as I can tell. So it's not just me. While thunar refuses to start, I can use PCManFM or Nautilus, but thunar is the file manager of choice, so if there already is a way to resolve this issue I'd be grateful for details. Btw I'm running MX 23 in a VirtualBox, no idea if that has anything to do with it.
Here's my QSI:
Code: Select all
System:
Kernel: 6.1.0-29-amd64 [6.1.123-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel, plank, cairo-dock wm: xfwm
v: 4.20.0 vt: 7 dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto May 28 2023 base: Debian
GNU/Linux 12 (bookworm)
Machine:
Type: Virtualbox System: innotek GmbH product: VirtualBox v: 1.2 serial: <superuser required>
Chassis: Oracle Corporation type: 1 serial: <superuser required>
Mobo: Oracle model: VirtualBox v: 1.2 serial: <superuser required> BIOS: innotek GmbH
v: VirtualBox date: 12/01/2006
CPU:
Info: model: AMD A8-6500T APU with Radeon HD Graphics bits: 64 type: MCP arch: Piledriver
level: v2 built: 2012-13 process: GF 32nm family: 0x15 (21) model-id: 0x13 (19) stepping: 1
microcode: 0x6000626
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 160 KiB desc: d-2x16 KiB; i-2x64 KiB
L2: 4 MiB desc: 2x2 MiB
Speed (MHz): avg: 2110 min/max: N/A cores: 1: 2110 2: 2110 bogomips: 8442
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not
affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.20.0.0 ports: active: Virtual-1
empty: Virtual-2, Virtual-3, Virtual-4, Virtual-5, Virtual-6, Virtual-7, Virtual-8
bus-ID: 00:02.0 chip-ID: 15ad:0405 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: vmware
unloaded: fbdev,modesetting,vesa dri: vmwgfx gpu: vmwgfx display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
Monitor-1: Virtual-1 mapped: Virtual1 res: 1920x1080 hz: 60 size: N/A modes: max: 1920x1080
min: 640x480
API: OpenGL v: 2.1 Mesa 22.3.6 renderer: SVGA3D; build: RELEASE; LLVM; direct-render: Yes
Audio:
Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel bus-ID: 00:05.0
chip-ID: 8086:2415 class-ID: 0401
API: ALSA v: k6.1.0-29-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
status: off tools: pw-cat,pw-cli,wpctl
Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: d020 bus-ID: 00:03.0
chip-ID: 8086:100e class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus v: N/A
modules: i2c_piix4 port: N/A bus-ID: 00:07.0 chip-ID: 8086:7113 class-ID: 0680
Drives:
Local Storage: total: 100 GiB used: 843.62 GiB (843.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: VirtualBox model: VBOX HARDDISK size: 100 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1.0 scheme: MBR
Partition:
ID-1: / raw-size: 24.89 GiB size: 24.33 GiB (97.76%) used: 19.74 GiB (81.1%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 70.85 GiB size: 69.19 GiB (97.65%) used: 35.54 GiB (51.4%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 4.25 GiB used: 8.3 MiB (0.2%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 2356 libs: 1165 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources
1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main
Info:
Processes: 217 Uptime: 1h 5m wakeups: 2464 Memory: 2.82 GiB used: 2.19 GiB (77.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
