FreeCad not updating properly  [Solved]

Help with the version of MX KDE officially released by the Development Team.
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Message
Author
Carroll Brotzge
Posts: 29
Joined: Sun Nov 26, 2023 4:37 pm

FreeCad not updating properly

#1 Post by Carroll Brotzge »

I keep getting a message that I have updates. After updating most of the programs the updater says checking updates and comes back with FreeCad needing to be updated. When I tell it to update, the updater flashes for a second or so and then says checking updates and comes back with FreeCad needing updating again. Clicking update just repeats the same thing. It has been doing this for the past couple of weeks or so. FreeCad never seems to update properly.

Here is my QSI:

Code: Select all

System:
  Kernel: 6.8.12-1-liquorix-amd64 [6.8-18~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.8.12-1-liquorix-amd64 root=UUID=<filter> ro
    quiet splash
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.4_KDE_x64 Libretto
    October 15 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop Mobo: ASUSTeK model: M5A99FX PRO R2.0 v: Rev 1.xx serial: <superuser required>
    UEFI: American Megatrends v: 2501 date: 04/07/2014
CPU:
  Info: model: AMD FX-8150 bits: 64 type: MT MCP arch: Bulldozer level: v2 built: 2011
    process: GF 32nm family: 0x15 (21) model-id: 1 stepping: 2 microcode: 0x600063E
  Topology: cpus: 1x cores: 8 smt: enabled cache: L1: 384 KiB desc: d-8x16 KiB; i-4x64 KiB
    L2: 8 MiB desc: 4x2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1407 high: 1461 min/max: 1400/3600 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1400 2: 1400 3: 1400 4: 1400 5: 1461 6: 1400
    7: 1400 8: 1400 bogomips: 57797
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: disabled; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GF100GL [Quadro 4000] driver: nouveau v: kernel non-free: series: 390.xx+
    status: legacy-active (EOL~late 2022) arch: Fermi code: GF1xx process: 40/28nm built: 2010-16
    pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: DVI-I-1 empty: DP-1,DP-2 bus-ID: 01:00.0
    chip-ID: 10de:06dd class-ID: 0300 temp: 56.0 C
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: DVI-I-1 model: ViewSonic VX2025wm serial: <filter> built: 2006 res: 1680x1050 hz: 60
    dpi: 99 gamma: 1.2 size: 433x271mm (17.05x10.67") diag: 511mm (20.1") ratio: 16:10 modes:
    max: 1680x1050 min: 720x400
  API: OpenGL v: 4.3 Mesa 24.2.2-1~mx23ahs renderer: NVC0 direct-render: Yes
Audio:
  Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:14.2
    chip-ID: 1002:4383 class-ID: 0403
  Device-2: NVIDIA GF100 High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0be5 class-ID: 0403
  API: ALSA v: k6.8.12-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK P8 series
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: c000 bus-ID: 09:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IF-ID-1: lxcbr0 state: down mac: <filter>
Drives:
  Local Storage: total: 1.36 TiB used: 225.28 GiB (16.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 043 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Toshiba model: MQ01UBD100 size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400 serial: <filter> scheme: MBR
Partition:
  ID-1: / raw-size: 341.89 GiB size: 335.46 GiB (98.12%) used: 225.27 GiB (67.2%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 9.8 MiB (1.9%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 22.2 C mobo: N/A gpu: nouveau temp: 56.0 C
  Fan Speeds (RPM): N/A gpu: nouveau fan: 2730
Repos:
  Packages: 3354 pm: dpkg pkgs: 3312 libs: 1887 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 42
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://www.gtlib.gatech.edu/pub/MX-Linux/workspace/mx/repo/ bookworm main non-free
    2: deb http://www.gtlib.gatech.edu/pub/MX-Linux/workspace/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/waydroid.list
    1: deb [signed-by=/usr/share/keyrings/waydroid.gpg] https://repo.waydro.id/ bookworm main
Info:
  Processes: 372 Uptime: 20h 56m wakeups: 1 Memory: 15.52 GiB used: 2.2 GiB (14.2%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Thanks for any help anyone can give.

Carroll Brotzge
Posts: 29
Joined: Sun Nov 26, 2023 4:37 pm

Re: FreeCad not updating properly  [Solved]

#2 Post by Carroll Brotzge »

I found out there is now a new version of FreeCad. Installed it and the problem went away.

Post Reply

Return to “MX KDE Official Release”