wireplumber status: off

[userMX-Linux45]

Good afternoon, dear Foruchans :)

The problem is this: when connecting the Microsoft LifeCam HD-3000 webcam, the microphone stops working at the moment, but not immediately, but after about a day, after a reboot, everything is ok again

Watched by the looked:

Code: Select all

inksy -Aa

Code: Select all

root@mx-linux:/home/Johnny# inxi -Aa
Audio:
  Device-1: AMD SBx00 Azalia vendor: Gigabyte GA-770/78-series
    driver: snd_hda_intel v: kernel bus-ID: 1-5:16 chip-ID: 045e:0779
    bus-ID: 00:14.2 chip-ID: 1002:4383 class-ID: 0102 class-ID: 0403
  Device-2: AMD Juniper HDMI Audio [Radeon HD 5700 Series]
    vendor: PC Partner / Sapphire driver: snd_hda_intel v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aa58 class-ID: 0403
  Device-3: Microsoft LifeCam HD-3000 type: USB
    driver: snd-usb-audio,uvcvideo
  API: ALSA v: k6.1.0-23-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: off 3: pipewire-alsa
    type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl

and it turned out that he stopped working as a wireplumber

Can you tell me how to restart Wireplumber without rebooting the PC?

[CharlesV]

Welcome in!

Please post your QSI. ( MX Menu, Quick System Info, Copy for Forum, Paste here )

You should upgrade your version of pipewire to the latest in the Enabled Repos ( MX Package Installer - search for pipewire and change to enabled repos tab.)

And if you install
pipewire-setup-mx

you will find a pipewire-restart command.. not sure if that restart wireplumber or not.. but worth a try.

[userMX-Linux45]

Code: Select all

Code: Select all

Snapshot created on: 20240630_1121
System:
  Kernel: 6.1.0-23-amd64 [6.1.99-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/vmlinuz-6.1.0-23-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_x64 Libretto January 21  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: Gigabyte model: GA-MA770-US3 serial: <superuser required> BIOS: Award v: FD
    date: 08/12/2009
CPU:
  Info: model: AMD Phenom 8750 bits: 64 type: MCP arch: K10 level: v1 built: 2007-08
    process: AMD 65nm family: 0x10 (16) model-id: 2 stepping: 3 microcode: 0x1000095
  Topology: cpus: 1x cores: 3 smt: <unsupported> cache: L1: 384 KiB desc: d-3x64 KiB; i-3x64 KiB
    L2: 1.5 MiB desc: 3x512 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 2411 min/max: N/A cores: 1: 2411 2: 2411 3: 2411 bogomips: 14466
  Flags: ht lm nx pae sse sse2 sse3 sse4a svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not
    affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Juniper PRO [Radeon HD 6750] vendor: PC Partner / Sapphire driver: radeon v: kernel
    alternate: amdgpu arch: TeraScale-2 code: Evergreen process: TSMC 32-40nm built: 2009-15 pcie:
    gen: 2 speed: 5 GT/s lanes: 16 ports: active: DVI-I-1 empty: DP-1,DVI-I-2,HDMI-A-1
    bus-ID: 01:00.0 chip-ID: 1002:68bf class-ID: 0300 temp: 44.0 C
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
    unloaded: fbdev,modesetting,vesa dri: r600 gpu: radeon display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: DVI-I-1 mapped: DVI-0 model: Samsung SyncMaster serial: <filter> built: 2008
    res: 1680x1050 hz: 60 dpi: 93 gamma: 1.2 size: 459x296mm (18.07x11.65") diag: 533mm (21")
    ratio: 3:2 modes: max: 1680x1050 min: 720x400
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: AMD JUNIPER (DRM 2.50.0 / 6.1.0-23-amd64 LLVM 15.0.6)
    direct-render: Yes
Audio:
  Device-1: AMD SBx00 Azalia vendor: Gigabyte GA-770/78-series driver: snd_hda_intel v: kernel
    bus-ID: 00:14.2 chip-ID: 1002:4383 class-ID: 0403
  Device-2: AMD Juniper HDMI Audio [Radeon HD 5700 Series] vendor: PC Partner / Sapphire
    driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 1002:aa58 class-ID: 0403
  API: ALSA v: k6.1.0-23-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: Gigabyte
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: de00 bus-ID: 02:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Realtek RTL8169 PCI Gigabit Ethernet vendor: Netgear GA311 driver: r8169 v: kernel
    port: ce00 bus-ID: 03:06.0 chip-ID: 10ec:8169 class-ID: 0200
  IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-3: Microsoft Xbox 360 Wireless Adapter type: USB driver: xpad bus-ID: 4-3:2
    chip-ID: 045e:0719 class-ID: ff00 serial: <filter>
Drives:
  Local Storage: total: 2.37 TiB used: 2.1 TiB (88.6%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-00BN5A0 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: 1A01 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sdb maj-min: 8:16 vendor: Intel model: SSDSA2M160G2HP size: 149.05 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 02M3 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WD3200AAKS-00V6A0 size: 298.09 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1D05
    scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-4: /dev/sdd maj-min: 8:48 vendor: Plextor model: PX-128S3C size: 119.24 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 1.03 scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-5: /dev/sde maj-min: 8:64 type: USB vendor: Western Digital model: WD10JUCT-63J6SY0
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400 serial: <filter>
    rev: 1.14 scheme: MBR
  SMART Message: A mandatory SMART command failed. Various possible causes.
Partition:
  ID-1: / raw-size: 42.65 GiB size: 42.59 GiB (99.85%) used: 9.72 GiB (22.8%) fs: xfs
    block-size: 512 B dev: /dev/sdd2 maj-min: 8:50
  ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 107.7 MiB (11.1%) fs: ext4
    block-size: 4096 B dev: /dev/sdd3 maj-min: 8:51
  ID-3: /home raw-size: 59.57 GiB size: 59.51 GiB (99.90%) used: 4.02 GiB (6.8%) fs: xfs
    block-size: 512 B dev: /dev/sdd1 maj-min: 8:49
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 16.02 GiB used: 931.2 MiB (5.7%) priority: -2 dev: /dev/sdd4
    maj-min: 8:52
Sensors:
  System Temperatures: cpu: 42.0 C mobo: 33.0 C gpu: radeon temp: 42.0 C
  Fan Speeds (RPM): cpu: 813 fan-1: 1979 fan-3: 1171 fan-5: 1085
  Power: 12v: N/A 5v: 2.99 3.3v: N/A vbat: 3.26
Repos:
  Packages: pm: dpkg pkgs: 2384 libs: 1254 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/systemback.list
    1: deb [arch=amd64] http://mirrors.bwbot.org/ stable main
Info:
  Processes: 339 Uptime: 19h 2m wakeups: 1 Memory: 7.75 GiB used: 6.91 GiB (89.2%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

[userMX-Linux45]

Установил pipewire-setup-mx но так и не понял где искать "pipewire-restart"

[CharlesV]

Установил pipewire-setup-mx но так и не понял где искать "pipewire-restart"

Sorry, I had a script setup called that!!

In the terminal. do

Code: Select all

pipewire-start

My script kills pipewire and then restarts it .

And your QSI shows the pipewire 1.0.0 still. you should try to update that.

[userMX-Linux45]

Code: Select all

root@mx-linux:/home/Johnny# pipewire-start

init [5]
start pipewire
[E][73602.039437] mod.protocol-native | [module-protocol-:  716 init_socket_name()] server 0x557fd441b7d0: name pipewire-0 is not an absolute path and no runtime dir found. Set one of PIPEWIRE_RUNTIME_DIR, XDG_RUNTIME_DIR or USERPROFILE in the environment
[E][73602.039811] pw.conf      | [          conf.c:  573 load_module()] 0x557fd43fd520: could not load mandatory module "libpipewire-module-protocol-native"

[CharlesV]

That looks to me like there is an issue with your pipewire installation.

Have you installed the latest version?

[userMX-Linux45]

Yes, the latest version is installed (1.0.0-1~mx23+1)

[fehlix]

Code: Select all

root@mx-linux:/home/Johnny# pipewire-start

You may consider to reduce usage of root-terminal.
If someone suggest to start a program it's meant to start as normal user not as root,
if not otherwise stated.

[Stevo]

Yes, the latest version is installed (1.0.0-1~mx23+1)

There is a newer version in the MX 23 test repo.