Code: Select all
System:
Kernel: 6.1.42-antix.1-amd64-smp arch: x86_64 bits: 64 compiler: gcc v: 13.2.0 clocksource: tsc
avail: hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.42-antix.1-amd64-smp
root=UUID=130f3855-f52a-4523-84d0-f628725add5a ro quiet selinux=0
Desktop: Fluxbox v: 1.3.7 tools: avail: slock,xlock vt: 7 dm: slimski v: 1.5.0
Distro: antiX-23_x64-full Arditi del Popolo 27 August 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: LENOVO product: 80XL v: Lenovo ideapad 320-15IKB
serial: <superuser required> Chassis: type: 10 v: Lenovo ideapad 320-15IKB
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40700 WIN serial: <superuser required>
part-nu: LENOVO_MT_80XL_BU_idea_FM_ideapad 320-15IKB uuid: <superuser required>
UEFI-[Legacy]: LENOVO v: 4WCN46WW date: 12/30/2019
Battery:
ID-1: BAT0 charge: 10.4 Wh (56.2%) condition: 18.5/30.0 Wh (61.8%) power: 9.6 W volts: 7.9
min: 7.4 model: LGC L16L2PB2 type: Li-poly serial: <filter> status: charging
Memory:
System RAM: total: 8 GiB available: 7.55 GiB used: 2.05 GiB (27.1%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 32 GiB slots: 2 modules: 2 EC: None max-module-size: 16 GiB note: est.
Device-1: ChannelA-DIMM0 type: DDR4 detail: synchronous unbuffered (unregistered) size: 4 GiB
speed: 2133 MT/s volts: curr: 1 min: 2 max: 2 width (bits): data: 64 total: 64
manufacturer: Samsung part-no: M471A5244CB0-CRC serial: N/A
Device-2: ChannelB-DIMM0 type: DDR4 detail: synchronous unbuffered (unregistered) size: 4 GiB
speed: 2133 MT/s volts: curr: 1 min: 2 max: 2 width (bits): data: 64 total: 64
manufacturer: TeamGroup part-no: TMKS4G56AHFHA-24U serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-7200U bits: 64 type: MT MCP arch: Amber/Kaby Lake note: check
gen: core 7 level: v3 note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 9 microcode: 0xF4
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2291 high: 2700 min/max: 400/3100 scaling: driver: intel_pstate
governor: powersave cores: 1: 2700 2: 2700 3: 1066 4: 2700 bogomips: 21599
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art
avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de
ds_cpl dtes64 dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm
lm mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good
sdbg sep sgx smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel HD Graphics 620 vendor: Lenovo driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:5916 class-ID: 0300
Device-2: Syntek EasyCamera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
mode: 2.0 bus-ID: 1-8:3 chip-ID: 174f:116a class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 driver: X: loaded: modesetting unloaded: fbdev,vesa
dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: eDP-1 model: ChiMei InnoLux 0x15db built: 2015 res: 1366x768 hz: 60 dpi: 101
gamma: 1.2 chroma: red: x: 0.569 y: 0.333 green: x: 0.329 y: 0.580 blue: x: 0.161 y: 0.145 white:
x: 0.314 y: 0.329 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes: 1366x768
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
drv: iris surfaceless: drv: iris x11: drv: iris inactive: wayland
API: OpenGL v: 4.6 vendor: intel mesa v: 22.3.6 glx-v: 1.4 es-v: 3.2 direct-render: yes
renderer: Mesa Intel HD Graphics 620 (KBL GT2) device-ID: 8086:5916 memory: 7.37 GiB unified: yes
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl, snd_soc_avs, snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71
class-ID: 0403
API: ALSA v: k6.1.42-antix.1-amd64-smp status: kernel-api with: apulse type: pulse-emulator
tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:3166 class-ID: 0280
IF: wlan0 state: up mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr proto kernel_ra scope: global
IP v6: <filter> virtual: proto kernel_ll scope: link
Info: services: mld,sshd,wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:2 chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 3 state: down bt-service: running rfk-block: hardware: no
software: yes address: <filter>
Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: peripheral accept
Logical:
Message: No logical block device data found.
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 port: 4060
bus-ID: 00:17.0 chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
Local Storage: total: 931.51 GiB used: 50.32 GiB (5.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB block-size:
physical: 4096 B logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter> fw-rev: 2E
scheme: GPT
Optical-1: /dev/sr0 vendor: PLDS model: DVD-RW DA8AESH rev: XL6M
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition:
ID-1: / raw-size: 931.51 GiB size: 915.81 GiB (98.31%) used: 50.32 GiB (5.5%) fs: ext4
dev: /dev/sda2 maj-min: 8:2 label: rootantiX23 uuid: 130f3855-f52a-4523-84d0-f628725add5a
Swap:
Kernel: swappiness: 10 (default 60) cache-pressure: 50 (default 100) zswap: no
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 1024 KiB fs: <superuser required> label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-7:2 info: Intel Bluetooth wireless interface type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 8087:0a2a class-ID: e001
Device-2: 1-8:3 info: Syntek EasyCamera type: video driver: uvcvideo interfaces: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA chip-ID: 174f:116a class-ID: 0e02
serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 44.0 C pch: 43.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: pm: dpkg pkgs: 2329 libs: 1191 tools: apt,apt-get,aptitude,synaptic
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb [signed-by=/etc/apt/keyrings/antix-archive-keyring.gpg] http: //ftp.ntua.gr/pub/linux/mxlinux/antix/bookworm bookworm main nonfree nosystemd
Active apt repos in: /etc/apt/sources.list.d/bookworm-backports.list
1: deb http: //deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https: //brave-browser-apt-release.s3.brave.com/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http: //ftp.gr.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http: //ftp.gr.debian.org/debian/ bookworm main contrib non-free non-free-firmware
2: deb http: //security.debian.org/ bookworm-security main contrib non-free non-free-firmware
No active apt repos in: /etc/apt/sources.list.d/librewolf.list
No active apt repos in: /etc/apt/sources.list.d/liquorix.list
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https: //download.onlyoffice.com/repo/debian squeeze main
Processes:
CPU top: 5 of 180
1: cpu: 47.8% command: yad pid: 6951 mem: 30.8 MiB (0.3%)
2: cpu: 10.8% command: brave pid: 3162 mem: 171.6 MiB (2.2%)
3: cpu: 6.7% command: brave pid: 3089 mem: 184.2 MiB (2.3%)
4: cpu: 4.2% command: brave pid: 3039 mem: 398.7 MiB (5.1%)
5: cpu: 3.7% command: caprine pid: 3942 mem: 260.7 MiB (3.3%)
Memory top: 5 of 180
1: mem: 423.9 MiB (5.4%) command: Viber pid: 4073 cpu: 0.8%
2: mem: 398.7 MiB (5.1%) command: brave pid: 3039 cpu: 4.2%
3: mem: 372.2 MiB (4.8%) command: telegram-desktop pid: 3742 cpu: 0.4%
4: mem: 260.7 MiB (3.3%) command: caprine pid: 3942 cpu: 3.7%
5: mem: 184.2 MiB (2.3%) command: brave pid: 3089 cpu: 6.7%
Info:
Processes: 180 Power: uptime: 14m states: freeze,mem,disk suspend: deep avail: s2idle wakeups: 0
hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 3 GiB services: upowerd
Init: SysVinit v: 3.08 runlevel: 5 default: 5 tool: service
Compilers: gcc: 12.2.0 Client: Fluxbox v: 1.3.7 inxi: 3.3.34
But audacity does with the setup on the photo!
Searching for solution found this topic :
https://gist.github.com/Therises/d2e91c ... d520fdc7ec
But it has to do with an older ubuntu installation using pule audio...
Made the above changes by going to /usr/share/alsa-card-profile/mixer/paths/analog-input-internal-mic.conf and /usr/share/alsa-card-profile/mixer/paths/analog-input-mic.conf and they look like thatIn /usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf and /usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf:
Under [Element Internal Mic Boost] set volume to zero.
Under [Element Int Mic Boost] set volume to zero.
Under [Element Mic Boost] set volume to zero
Code: Select all
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists
; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38
;
; See analog-output.conf.common for an explanation on the directives
[General]
priority = 89
description-key = analog-input-microphone-internal
[Jack Mic]
state.plugged = no
state.unplugged = unknown
[Jack Dock Mic]
state.plugged = no
state.unplugged = unknown
[Jack Front Mic]
state.plugged = no
state.unplugged = unknown
[Jack Rear Mic]
state.plugged = no
state.unplugged = unknown
[Jack Internal Mic Phantom]
state.plugged = unknown
state.unplugged = unknown
required-any = any
[Element Capture]
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
[Element Internal Mic Boost]
required-any = any
switch = select
volume = 100
override-map.1 = all
override-map.2 = all-left,all-right
[Option Internal Mic Boost:on]
name = input-boost-on
[Option Internal Mic Boost:off]
name = input-boost-off
[Element Int Mic Boost]
required-any = any
switch = select
volume = 100
override-map.1 = all
override-map.2 = all-left,all-right
[Option Int Mic Boost:on]
name = input-boost-on
[Option Int Mic Boost:off]
name = input-boost-off
[Element Internal Mic]
required-any = any
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
[Element Int Mic]
required-any = any
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
[Element Input Source]
enumeration = select
[Option Input Source:Internal Mic]
name = analog-input-microphone-internal
required-any = any
[Option Input Source:Int Mic]
name = analog-input-microphone-internal
required-any = any
[Element Capture Source]
enumeration = select
[Option Capture Source:Internal Mic]
name = analog-input-microphone-internal
required-any = any
[Option Capture Source:Int Mic]
name = analog-input-microphone-internal
required-any = any
[Element Mic]
switch = off
volume = off
[Element Dock Mic]
switch = off
volume = off
[Element Front Mic]
switch = off
volume = off
[Element Rear Mic]
switch = off
volume = off
[Element Headphone Mic]
switch = off
volume = off
[Element Headphone Mic Boost]
switch = off
volume = off
[Element Mic Boost]
switch = off
volume = 100
[Element Dock Mic Boost]
switch = off
volume = off
[Element Front Mic Boost]
switch = off
volume = off
[Element Rear Mic Boost]
switch = off
volume = off
.include analog-input-mic.conf.common
Code: Select all
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
; For devices where a 'Mic' or 'Mic Boost' element exists
;
; See analog-output.conf.common for an explanation on the directives
[General]
priority = 87
description-key = analog-input-microphone
[Jack Mic]
required-any = any
[Jack Mic Phantom]
required-any = any
state.plugged = unknown
state.unplugged = unknown
[Jack Mic - Input]
required-any = any
[Element Capture]
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
[Element Mic Boost]
required-any = any
switch = select
volume = 100
override-map.1 = all
override-map.2 = all-left,all-right
[Option Mic Boost:on]
name = input-boost-on
[Option Mic Boost:off]
name = input-boost-off
[Element Mic]
required-any = any
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right
[Element Input Source]
enumeration = select
[Option Input Source:Mic]
name = analog-input-microphone
required-any = any
[Element Capture Source]
enumeration = select
[Option Capture Source:Mic]
name = analog-input-microphone
required-any = any
[Element PCM Capture Source]
enumeration = select
[Option PCM Capture Source:Mic]
name = analog-input-microphone
required-any = any
[Option PCM Capture Source:Mic-In/Mic Array]
name = analog-input-microphone
required-any = any
;;; Some AC'97s have "Mic Select" and "Mic Boost (+20dB)"
[Element Mic Select]
enumeration = select
[Option Mic Select:Mic1]
name = input-microphone
priority = 20
[Option Mic Select:Mic2]
name = input-microphone
priority = 19
[Element Mic Boost (+20dB)]
switch = select
volume = 100
[Option Mic Boost (+20dB):on]
name = input-boost-on
[Option Mic Boost (+20dB):off]
name = input-boost-off
[Element Front Mic]
switch = off
volume = off
[Element Internal Mic]
switch = off
volume = off
[Element Rear Mic]
switch = off
volume = off
[Element Dock Mic]
switch = off
volume = off
[Element Dock Mic Boost]
switch = off
volume = off
[Element Internal Mic Boost]
switch = off
volume = off
[Element Front Mic Boost]
switch = off
volume = off
[Element Rear Mic Boost]
switch = off
volume = off
.include analog-input-mic.conf.common
Code: Select all
pacmd list-sources | grep 'name:.*input'Code: Select all
chrissos@antix-lenovo:~
$ pacmd list-sources | grep 'name:.*input'
bash: pacmd: εντολή δεν βρέθηκε
/etc/pulse/default.pa also default.pa does not exist(propably pulseaudio also)...
So does anybody know if and how i can make the mic work under pipewire?
I think it will work on MX, antiX etc....
